Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows some barely noticeable signs of aging on the Zytel handle and a couple of small spots of oxidation on the tip of the blade (right side), which in no way compromise its practical use
* Commercially available: Discontinued
* Sharpness: Factory-sharpened; could be improved
* Marks on blade: A couple of small spots of oxidation on the tip of the blade, on the right side, which in no way compromise its practical use
* Marks on handle: A few barely noticeable signs of aging
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

Intended use: sports / collectible

Production type: Industrial
Country of manufacture: Japan
Blade: VG-10 stainless steel
Blade finish: Satin
Handle: Zytel, with stainless steel liners
Blade length: 90 mm.
Blade thickness: 4 mm.
Closed length: 120 mm.
Overall length: 210 mm.
Thickness when closed: 20 mm.
Weight: 135 g.
Closure: Arc-Lock (crossbar lock)
Clip: removable, stainless steel
Packaging: -
Notes: Previously purchased knife, from a private collection

PREVIOUSLY PURCHASED AND USED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased and used
* Condition: Good overall condition, with evident signs of age and use
* Commercial availability: Discontinued
* Sharpening: Resharpened
* Marks on blade: Present, with scratches, abrasions and surface dulling consistent with age and use
* Marks on handle: Present, with natural patina and signs of use on the stacked leather washers
* Box: -
* Sheath: Present, original leather sheath, heavily used and showing signs of age
* Manuals, Certificates and Warranties: -
* Inspected and Certified by our in-house laboratory

The SOG S1 Bowie Vietnam 5th Special Forces Group is one of the most representative knives in the history of SOG Specialty Knives and the model with which the American brand began its production during the second half of the 1980s. Made in Seki, Japan, the S1 was created as a tribute to the famous knives used by members of the Military Assistance Command, Vietnam – Studies and Observations Group (MACV-SOG) during the Vietnam War.

It is important to distinguish the S1 from the original “sterile” military knives actually used operationally during the conflict: the commercial SOG model instead reproduces the commemorative configuration of the famous MACV-SOG Bowie, featuring the U.S. Army Special Forces crest on the blade together with the marking “VIETNAM 5th SPECIAL FORCES GROUP”. This strong historical identity, combined with the quality of Japanese manufacturing, has made it one of the most recognizable and sought-after vintage SOG knives among collectors.

Production was entrusted to Ichiro Hattori in Seki, one of the most important names in Japanese knifemaking. The substantial Bowie blade is made from SK-5 carbon steel, hardened to approximately 57-58 HRC, with the characteristic dark gun-blue finish combined with polished surfaces. The handle uses traditional stacked leather washers stabilized with epoxy resin, completed by a sturdy metal guard and pommel.

This example features the classic SOG Specialty Knives logo on one side of the ricasso and, on the opposite side, the markings “SEKI-JAPAN”, the Special Forces crest and the inscription “VIETNAM 5th SPECIAL FORCES GROUP”. It is also accompanied by its original black leather sheath, complete with sharpening stone pocket and a large Special Forces crest embossed on the lower section. The original period identification label is still present on the back of the sheath.

The example offered here comes from a private collection and has actually been used. The blade shows scratches, abrasions and surface marks, both on the blued and polished areas; the leather handle has developed a noticeable patina and shows wear consistent with its age. The original sheath is also heavily used, with leather wear, marks and widespread abrasions. Its condition should therefore be considered good in relation to its age and nature, but it should not be compared with a display-grade or NOS example.

These very characteristics tell the story of an authentic SOG S1 made in Seki: a knife that, regardless of its cosmetic condition, retains all the appeal of one of the founding models of the brand and today represents a particularly significant piece for a collection dedicated to American military knives and Japanese SOG production from the 1980s and 1990s.

Intended use: Military / Collection
Production type: Industrial
Model: S1 Bowie - Vietnam 5th Special Forces Group
Country of manufacture: Seki - Japan
Model production period: 1986 - 2005
Blade: SK-5 carbon steel
Hardness: 57-58 HRC
Blade finish: Gun-blue / polished
Blade profile: Bowie
Edge: Plain
Handle: Stacked leather washers stabilized with epoxy resin
Guard and pommel: Metal
Blade length: Approx. 159mm
Blade thickness: Approx. 7.1mm
Overall length: Approx. 273mm
Weight: Approx. 349g
Sheath: Original black leather sheath with sharpening stone pocket and Special Forces crest
Notes: Previously purchased and used knife, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Like new
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: None
* Marks on handle: None
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: Included
* Inspected and Certified by our in-house laboratory

The SOG Forge FG01-L is a knife of extraordinary beauty and build quality, combining Japanese craftsmanship with modern production techniques.

The blade, forged using a hammering technique, features a unique texture that is one-of-a-kind for each piece. It is made of San Mai steel, with a VG-10 cutting edge and 420J2 outer layers, a combination that ensures an excellent balance between sharpness, edge retention, and durability.

The glass-reinforced nylon (GRN) handle is designed with perfectly contoured inserts to provide optimal balance and a secure, comfortable grip. The knife is complemented by an elegant premium leather sheath, enhanced with a colored fabric insert and a button closure.

Manufactured in Japan, the SOG Forge FG01-L evokes an era when honor and master craftsmanship were fundamental values. An object that is not merely a tool, but a true collector’s item destined to stand the test of time and be passed down from generation to generation.

Intended Use: Collectible / Sport

Production Type: Industrial
Country of Origin: Seki - Japan
Blade: SanMai laminated stainless steel with a VG-10 cutting edge and 420J2 outer layers, featuring a concave grind
Blade Finish: Hammered and Brut de Forge with a satin-finished portion of the cutting edge
Handle: Three-dimensionally shaped GRN (Glass Reinforced Nylon)
Blade Length: 160mm.
Blade thickness: 5 mm.
Overall length: 275 mm.
Weight: 290 g.
Sheath: Leather, with an insert of fine Japanese fabric, which varies from sheath to sheath
Packaging: Cardboard box with SOG logos
Notes: Knife from a private collection, previously purchased

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, NOS (new old stock), never used or removed from its original box
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present and perfect
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

Created in 1986 as the second official model of the newly formed SOG Specialty Knives, the S2 Trident is not just a knife, but a bridge between the past and the present. Designed in honor of the Navy SEALs and special units that operated in Vietnam, it draws direct inspiration from the legendary MACV-SOG knives of the 1960s, “sterilized” and lethal tools used in the most secret missions of the conflict.

Produced during the company's golden age in Seki, Japan, the Trident combines elegant lines and combat functionality: a thick, balanced AUS-8 steel Bowie blade with impeccable satin finish; ergonomic and durable black micarta stacked washer handle; and the engraved Navy SEAL symbol, a seal of belonging to an elite group. The leather sheath with sharpening stone completes a package designed for operators and collectors.

The S2 Trident is the most refined tribute to SOG's operational past: a homage to the military tradition of Vietnam reinterpreted with Japanese craftsmanship. Today, with a very high rarity index, it is considered one of the most sought-after pieces by military knife collectors, not only for its build quality, but for the history embodied in its blade.

Intended use: Military / Collection

Type of production: industrial
Country of production: Seki - Japan
Blade: AUS-8 stainless steel
Blade finish: Satin
Handle: Stacked micarta rings
Blade length: 160mm.
Blade thickness: 6 mm.
Total length: 278 mm.
Balance: rearward, 1 cm from the guard
Weight: 312 g.
Sheath: leather with pocket for sharpening stone (included)
Notes: previously purchased knife from a private collection

KNIFE RETIRED FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased and no longer in production
• Condition: Overall in excellent condition
• Commercial Availability: NOT commercially available
• Edge: Original
• Blade marks: None
• Handle marks: None
• Box: -
• Sheath: -
• Manuals, Certificates, and Warranties: -
• Inspected and Certified: by our internal laboratory

The SOG Mini-Vulcan VL-02 is a high-quality folding knife designed to meet the needs of knife enthusiasts and demanding users. Engineered to combine durability, functionality, and refined design, this model is the perfect blend of advanced engineering and precision craftsmanship.

The VG-10 steel blade, extremely sharp and corrosion-resistant, ensures flawless performance both in outdoor settings and daily tasks. The patented Arc-Lock opening mechanism from SOG offers secure and smooth closure while ensuring speed and ease of use.

Compact and lightweight, the Mini-Vulcan is perfect for those seeking a versatile, reliable, and easy-to-carry knife. Whether you’re a collector, hiker, or professional, this knife will be an essential companion, ready to tackle the challenges of any day.

Intended Use: Sporting

Production Type: Industrial
Blade Production: Japan
Blade: VG-10 stainless steel
Blade Treatment: -
Handle: Zytel and steel liners
Blade Length: 78mm
Blade Thickness: 3mm
Closed Length: 109mm
Overall Length: 187mm
Closed Thickness: 20.3mm
Balance: -
Weight: 104g
Locking Mechanism: Arc Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: -
Notes: -

The SOG Winder II Heavy Duty Folding Knife (model SOG00009) exemplifies high quality and precision in knife making. With a blade length of 8.8 cm and a thickness of 4.7 mm, it is perfect for all kinds of tasks, providing excellent performance in cutting, slicing and piercing. The black textured Kraton handle provides an excellent grip, while the sturdy Lockback mechanism ensures safety during use.

The knife has an ambidextrous design, making it easy for both left- and right-handed people to use, and its compactness (11.4 cm when closed) makes it convenient to carry in a pocket or backpack. Made in Seki, Japan, a city with a long tradition of knife making, the Winder II is synonymous with high quality and craftsmanship.

Purchased in 1994 from the well-known Hoffritz cutlery chain in New York and now discontinued, it is a collector's item of great historical value. This knife, from a private collection, shows no signs of use, and is a prized piece for enthusiasts and collectors.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: In very good condition, with normal signs due to time
* Commercially available: 1994 knife - Discontinued model
* Sharpening: Factory.
* Marks on blade: Normal marks given by the opening and closing of the blade.
* Marks on handle: No.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Production Type: Industrial
Country of Production: Japan
Blade: stainless steel AUS-8
Blade finish: satin finish
Handle: stainless steel and kraton
Blade length: 88mm.
Blade thickness: 4.7mm.
Length closed: 114mm.
Total length: 205mm.
Weight: 220g.
Closure: back-Lock
Notes: previously purchased 1994 knife, discontinued, in excellent condition

KNIFE FROM A PRIVATE COLLECTION
* Type: Previously purchased knife withdrawn from a private collection
* Condition: Excellent, with very minor marks on the blade
* Availability: Available
* Edge: Factory edge
* Blade Marks: Minor marks on the blade
* Handle Marks: None
* Box: Original
* Sheath: Perfect, never used
* Manuals, Certificates, and Warranties: Original warranty document
Inspected and Certified by our internal lab

The Moros is an excellent choice for field use or tactical applications. This well-balanced blade is the perfect blend of size and performance. Light enough to carry without discomfort but sturdy enough to tackle various daily tasks. The tip profile is flat with a tapered upper edge, ensuring excellent cutting performance with good penetration strength. The full tang and handle of the Moros provide a neutral balance, making it light in hand. The ergonomic and textured Micarta canvas handle offers a comfortable and secure grip, both dry and wet.

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had been designing knives for friends in the special forces, and Mark, who worked with military and tactical equipment in the "Green Berets," decided to combine their skills and passion to create innovative and functional knives using the highest quality materials, entirely made in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Manufacture: USA
Blade: CPM-S45VN stainless steel 59/61 HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade Length: 134 mm
Blade Thickness: 4.8 mm
Overall Length: 254 mm
Balance: On guard
Weight: 203 g
Sheath: Kydex thermoformed
Packaging: Cardboard box with Spartan Blades logo
Note: Design by Curtis Iovito

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: Japan
Blade: VG10 stainless steel
Blade Finish: Black TiNi
Handle: Zytel with steel liners
Blade Length: 78mm.
Blade thickness: 3mm.
Length closed 109mm.
Total length: 187mm.
Thickness when closed: 20.3mm.
Weight: 104g.
Closure: Arc Lock
Clip: removable, stainless steel
Scabbard: -
Packaging: cardboard box with SOG logos
Notes: previously purchased knife from a private collection

The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.

All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.

Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

The POROS flipper was designed by Curtis Iovito as a robust and large-sized flipper. The high grind lines of this blade, combined with a sharp and penetrating tip, make it a reliable companion for everyday carry.

Its quick flipper action is assisted by IKBS bearings for that "Snap" you're looking for! Its distinctive scallops are not only beautiful to look at but also ensure a secure grip. The deep pocket clip maintains a low profile while keeping your blade ready for use when needed. The blade is made of 154CM stainless steel with a black titanium nitride coating; the SS hardware and liner have a black electroplated powder coating.

Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in 154CM stainless steel 58/60 HRC
Blade treatment: Black Titanium Nitride Coating
Handle: OD Green G10
Blade length: 89mm.
Blade thickness: 4mm.
Closed length: 97mm
Total length: 230mm.
Weight: 147g.
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos. Design: Curtis Iovito
Notes: The Field Grade series with Bronze-colored box identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.

The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."

The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.

All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: Composite made of G10 and Carbon Fiber
Blade Length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.

The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.

All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.

Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

The Spartan-Ronin Shōtō is a folding karambit knife with a liner lock. This blade is the result of a collaborative effort between Spartan Blades and TU Lam of Ronin Tactics, our former Special Forces colleague and dear friend.

Having worked throughout Asia and in Indonesia, both Tu Lam and Spartan hold a great respect for the Karambit style. This blade was designed to be incorporated into various martial arts systems.

It features a blade made of CTS-XHP, "Emerson Wave" function for easy opening, and a reversible pocket clip for left-hand carry; the black and red G10 grips ensure a secure grip. Please check this link to Ronin Tactics HERE.

All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or “OIBBS”. Our sintered bronze bearings are oil-impregnated, thereby reducing friction on the blade, offering you a tight but smooth blade opening.

Intended use: Collection / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel CTS-XHP
Blade treatment: Satin Black Ti/Nitride Finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed length: 135mm
Total length: 200mm.
Weight: 179g.
Lock: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.

On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps hoping it would become the standard weapon. In collaboration with the Marine Supply Department, the project was revised, and production began on an improved combat and utility knife.

During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.

In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with improved strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.

CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Black leather
Packaging: Cardboard box with Spartan Blades logos
Notes: Please note that the Flat Dark Earth (FDE) coated blade, when inserted or removed from the leather sheath, may show streaks or stains due to the dye used for the sheath. The blade can be cleaned with petroleum or acetone, re-oiled (e.g., with WD40 or light mechanical oil), and dried with a clean cloth to restore the original coating finish.

On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps in the hope of it becoming the standard weapon. In collaboration with the Marine Supply Department, the project was revised and the production of an improved combat and utility knife began.

During the war, USMC KA-BAR knives became so renowned for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.

In 2019, KA-Bar joined forces with Spartan Blades to establish Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with enhanced strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.

CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specially designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: Tungsten DLC
Handle: Kraton G with stainless steel 301 guard and Tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Kydex, thermoformed, with belt loops and M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: -

On December 9, 1942, during World War II, KA-BAR presented a knife to the United States Marine Corps, hoping it would become the standard weapon. In collaboration with the Marine Quartermaster Department, the project was revised, and production began on an improved combat and utility knife.

During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, Iraq, and Afghanistan conflicts.

In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt desired a "KA-BAR" with enhanced durability, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.

CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries, specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Kydex, thermoformed, with belt loops and M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: -

Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Fighter is born from the partnership between William W. Harsey Jr. and Spartan Blades. The intention behind this knife was to combine the blade of a US military combat/utility knife with the contoured handle that has become a hallmark of Mr. Harsey's designs. This knife is a no-nonsense combat blade.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 155mm
Blade Thickness: 4.9mm
Overall Length: 292mm
Weight: 334g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.

Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the design of the Spartan-Harsey Nessmuk is based on a classic American concept popularized by George Washington Sears (1821-1890) and the more moderate ergonomic designs of William W. Harsey Jr.

Under the guidance of a Native American from the Narragansett tribe named Nessmuk, George Washington Sears embraced the natural world, learning survival skills. Sears adopted "Nessmuk," meaning "wood duck," as his pseudonym, reflecting his love for forest life. Writing as "Nessmuk," he contributed to Forest and Stream magazine in the 1880s, promoting canoeing, the Adirondack lakes, and environmentalism.

Sears' diverse experiences led to his writings on the wonders of nature and conservation. He advocated minimalism: lighting fires, setting up tents, and more. He emphasized respect for nature, leading to a call for conservation.

Sears authored "Woodcraft" (1884), offering practical advice and introspection. The "Log of the Bucktail" series and poetry followed. Illness couldn't weaken his love for nature. He passed away in 1890, with Nessmuk's legacy enduring in Wellsboro.

A supporter of thin and sharp knives, Sears' ideals are reflected in our Nessmuk design.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 130mm
Blade Thickness: 4.8mm
Overall Length: 254mm
Weight: 308g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.

Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Kukri knife has been designed to be a highly durable hiking knife. The kukri features a blade of over 22cm, making it an all-around tool due to its center of mass, allowing the user to slice while cutting to even penetrate thick objects.

While this blade is primarily famous for its military use, the kukri is more commonly employed as a multi-purpose tool in fields and homes across Nepal. Its uses range from construction, clearing, cutting firewood, digging, butchering animals for food, slicing meat and vegetables, skinning animals, to opening cans.

It can function as a smaller knife using the narrower part of the blade closer to the handle. The heavier and wider end of the blade, towards the tip, functions as a hatchet or a small shovel.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 223mm
Blade Thickness: 6.3mm
Overall Length: 352mm
Weight: 580g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without having to sacrifice USA-made production.

Alala - In ancient Greece, it meant "battle cry" or "war cry" and was the personification of the war cry in Greek mythology. ... Greek soldiers attacked the enemy with this cry to cause panic in their ranks. Its sturdy and comfortable design makes it a very comfortable everyday carry fixed blade with excellent ergonomics. Perfectly suited for daily cutting tasks, it is always ready to assist the user. The molded sheath is equipped with an active retention lever and a securing strap for convenient carry options. Made by the excellent people at KA-BAR Knives; in Olean, NY, USA.

Intended use: Tactical / Military

Production type: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 95mm.
Blade thickness: 4.8mm.
Total length: 200mm.
Weight: 135g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito/Carey - The Professional Grade series with a silver-colored box identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company founded by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in the USA production.

This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.

The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.

This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!

Intended Use: Collector/Sportsman

Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V 
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

The Harsey TT (Tactical Trout) is designed to be a very comfortable and sturdy medium-sized knife for most field tasks and defensive use. The size of the TT makes it easy to carry and handle.

The blade profile provides a clean cut with excellent tip strength. The full tang and handle of the Harsey TT provide neutral balance in the user's hand. The ergonomically shaped, linen Micarta handle provides a comfortable and secure grip when dry or wet. The pommel has a lanyard hole in the center of the angled tip. The TT is an excellent universal fixed blade, well balanced in size, function and feel. In our opinion, one of William Harsey's best designs.

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade finish: ZrN Flat Dark Earth
Handle: Linen Micarta
Blade length: 114mm.
Blade thickness: 4.8mm.
Total length: 229mm.
Balance: on the guard branch
Weight: 209g.
Sheath: thermoformed in Kydex
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: Carbon steel 1095 56/58HRC
Blade Finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade Length: 139mm.
Blade Thickness: 4.8mm.
Total length: 273mm.
Weight: 255g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E. compatible belt clip and push-button retention system.
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Note: Design by Iovito/Carey - The Professional Grade series with Silver box, identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience in order to keep prices affordable to the public without having to renounce to a made in USA production.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: Carbon steel 1095 56/58HRC
Blade Finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade Length: 139mm.
Blade Thickness: 4.8mm.
Total length: 273mm.
Weight: 255g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E. compatible belt clip and push-button retention system.
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Note: Design by Iovito/Carey - The Professional Grade series with Silver box, identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience in order to keep prices affordable to the public without having to renounce to a made in USA production.

Intended Use: Neck / Tactical / Military

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8A 58/60HRC
Blade Finish: Black Powder Coating
Handle: Stainless steel AUS-8A 58/60HRC
Blade Length: 68mm.
Blade thickness: 4.8mm.
Total length: 159mm.
Weight: 80g.
Scabbard: Thermoplastic, multi-position, with push-button retention system.
Package: Cardboard box with Spartan Blades Field Grade logos.
Note: Design by Iovito/Carey - The Field Grade series with Bronze color box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (company formed by Spartan Blades and Ka-Bar). In this series you can find the most iconic Spartan Blades designs offered at very aggressive and competitive prices.

Model winner of the 2016 Blade Show as "American Made Knife of the Year"

The model photographed is the Limited Edition 2019

After more than 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who for years had been designing and designing knives for friends in the special forces and Mark, who had always been involved in military equipment and tactics when he worked in the "Green Berets", decided to combine their skills and their passion with the goal to build innovative and functional knives using materials of the highest quality and made entirely in the United States.

Intended use: Collection / Sports
Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Washed
Handle: titanium 6AL-4V
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 125mm
Total length: 225mm.
Weight: 168g.
Closure: FrameLock
Clip: in anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey - 2019 limited edition anodized with engravings

Destination of use: sports / tactical

Type of production: industrial
Country of production: USA
Blade: full tang, stainless steel CPM-S35VN, 61HRC
Blade treatment: two tone: satin & stonewashed
Handle: black canvas micarta
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 251mm.
Balancing: on the guard branch
Weight: 206g.
Sheath: in kydex, multiposition, with Tek-Lok type connection
Packaging: cardboard box with Sog Knives logos
Note: -

Blade: AUS-8 HRC 57/58 stainless steel

Handle: Zytel
Length Blade: 180 mm.
Thickness Blade: 5 mm.
Total length: 310 mm.
Weight: 292 g.
Fodero: Kydex

Winner of the Blade Show 2016 as "American Made Knife of the Year"

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.

Purpose: Collection / Sportsman
Type of production: Semi-Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade Treatment: Black PVD
Manicure: Black PVD 6AL-4V titanium
Blade Length: 100mm.
Blade thickness: 4mm.
Closed length: 125mm
Total length: 225mm.
Weight: 166g.
Closure: FrameLock
Clip: anodized titanium
Packing: Cardboard box with Spartan Blades logos
Notes: Design by William Harsey - Limited edition anodized with engravings
Google Traduttore per il Business:Translator ToolkitTraduttore di siti webStrumento a supporto dell'export
Informazioni su Google TraduttoreCommunityPer cellulariTutto su GooglePrivacy e TerminiGuida

Winner of the Blade Show 2016 as "American Made Knife of the Year"

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.

Purpose: Collection / Sportsman
Type of production: Semi-Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade Treatment: Black PVD
Manicure: Anodized 6AL-4V titanium
Blade Length: 100mm.
Blade thickness: 4mm.
Closed length: 125mm
Total length: 225mm.
Weight: 166g.
Closure: FrameLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Design by William Harsey - Limited edition anodized with engravings
Google Traduttore per il Business:Translator ToolkitTraduttore di siti webStrumento a supporto dell'export
Informazioni su Google TraduttoreCommunityPer cellulariTutto su GooglePrivacy e TerminiGuida

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.

Target: Tactical / Sportsman
Type of production: industrial seeds
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: PVD
Handle: aluminum
Blade Length: 96mm.
Blade thickness: 4 mm.
Closed length: 130mm
Overall length: 222mm.
Closed thickness: 18mm
Weight: 149g.
Closure: ButtonLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Opening movement with Carson Flipper system

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.

Target: Tactical / Sportsman
Type of production: industrial seeds
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: PVD
Handle: aluminum
Blade Length: 96mm.
Blade thickness: 4 mm.
Closed length: 130mm
Overall length: 222mm.
Closed thickness: 18mm
Weight: 149g.
Closure: ButtonLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Opening movement with Carson Flipper system

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.

Target: Tactical / Sportsman
Type of production: industrial seeds
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Stonewash
Handle: aluminum
Blade Length: 96mm.
Blade thickness: 4 mm.
Closed length: 130mm
Overall length: 222mm.
Closed thickness: 18mm
Weight: 149g.
Closure: ButtonLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Opening movement with Carson Flipper system

Intended use: Tactical / Military

Production: Taiwan
Blade: AUS-8 stainless steel 57/58 HRC
Handle: Zytel
Blade length: 125mm.
Blade thickness: 4.5mm.
Overall length: 240mm.
Balancing: backward
Weight: 158g.
Sheath: Belt, Nylon, with front pocket

This small titanium folder is the result of a desire by Spartan Blade to produce a high quality slip joint folder using as few small moving parts as possible. While attending the 2012 IWA Show in Germany, we spoke with several people who simply couldn’t own one of our larger folders due to the restrictions of knives with locks, one handed opening, and long blades. During the show, Mark and Curtis were visiting the Nuremburg Toy Museum and were impressed by some of the very small high-tech mechanisms used to make toys. It was then the idea hit them to make a slip joint that didn’t require several small fine blanked parts, allowing for a more modern look and function than the classic slipjoint. Now they had a great idea but not the full mechanism to make it work.

Later, Spartan met with Les Halpern of Halpern Titanium and explained their idea for a small modern slip joint. He became very excited as he had an idea for a similar knife using what he called “A good idea” for a mechanism. Les did some drawings explaining his idea for eliminating the traditional back spring. Normally, slip joint blades are held in position by a strong "back spring" which assists them with bias to the open or closed position. Les’ idea was to make the frame the spring with the same bias in open or closed position.

This folder eliminates the need for a back spring by using what we call an “Integral Frame Slipjoint”, the dorsal side of the frame is cut to work as a spring and holds a pin that creates a bias to close and open. The blade is opened by pushing on the tab on the blade (it is not a flipper tab!) with one hand and pulling with the thumb and forefinger on the triangle cut-out of the opposite side and hand. Additionally, the pin "locks" into the blade when held firmly by the users thumb and forefinger in in position of use but is free to rotate upon release of the frame handle.

Intended use: Sport / Collection
Production Type: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Treatment Lama: stonewash
Handle: titanio
Blade length: 48mm.
Blade thickness: 2 mm.
Closed Length: 74mm
Overall length: 121mm.
Thick when closed: 7mm
Balancing: -
Weight: 36g.
Closing: Integral Frame Slipjoint (opening and closing two-handed block blade)
Clip: Titanium
Sheath: -
Packaging: Cardboard box with logos Spartan Blades
Notes: WINNER - BLADE 2014 Most Innovative American Made Knife of the Year

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.

Target: Tactical / Sportsman
Type of production: industrial seeds
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Stonewash
Handle: aluminum
Blade Length: 96mm.
Blade thickness: 4 mm.
Closed length: 130mm
Overall length: 222mm.
Closed thickness: 18mm
Weight: 149g.
Closure: ButtonLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Opening movement with Carson Flipper system

Intended Use: Sport / Tactical

Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel Aus-8
Treatment Blade: Hardcased Black Ti-Ni
Handle: Black Linen Micarta
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 112mm.
Overall length: 198mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Lock: Liner Lock
Clip: Stainless steel removable and reversible TiNi
Sheath: -
Packaging: Cardboard box with logos SOG
Notes: Design by Kiku Matsuda

The SOG Toothlock knife model TK-01 has a unique feature you will not find in other knives. The locking mechanism integrated into the handle nudges the blade ajar when the user slides it backward. This nudging action gets the blade started out of the handle, and with the flick of the wrist, the user can pop the blade out in a hurry. This combined motion makes for a very fast opening knife. The shape of the blade is fabulous and has VG-10 laminated onto its surface for a razor sharp edge and excellent retention. The handle is made of sturdy Zytel with textured grooves and grips. A bayonet style clips is mounted on the end of the knife for a nice, deep carry.

• Blade Length: 3 inches
• Overall Length: 7.3125 inches
• Weight: 3.3 oz
• Blade Material: VG-10
• Handle Material: Zytel
• In Stock: more than 10

Type of production: Industrial
Production Lama: China
Blade: stainless steel 3CR13
Treatment Blade: Teflon
Handle: Nylon and Glass Fiber
Blade length: 89mm.
Blade thickness: 8mm. in the central point
Length closed: -
Total length: 317mm
Thick when closed: -
Balance: -
Weight: 807g.
Closing: -
Clip: -
Sheath: Nylon
Packing: pack with logos Sog
Notes: -

Based on the Vietnam Tomahawk, the Tactical Tomahawk is an extreme evolution of the original which was considered one of the more unusual weapons of its day.

Purpose: Tactical / Sports

Type of production: Semi-Industrial
Country of Production: USA
Blade: Stainless Steel CPM-S35VN
Blade Treatment: Tungsten DLC PVD Flat Black
Handle: Titanium and G10
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 149g.
Blocking System: Frame Lock with Lock Bar Stabilizer system by Rick Hinderer
Clip: Stainless Steel
Package : carton box with Spartan Blades logos
Notes: : Design by Iovito / Carey

Spartan Blades - Black CQB Tool knife - Knife

Type of production: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN 59/60HRC
Treatment Blade: Black SpartaCoat
Handle:
Blade length: 60mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 170mm.
Thick when closed: -
Balance: -
Weight: 58g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: -
Notes:

Dopo oltre 40 anni di servizio nella US Army Special Forces, Curtis Iovito e Mark Carey fondano nella North Carolina la Spartan Blades LLC.

Curtis, che già da anni progettava e disegnava coltelli per gli amici nelle forze speciali e Mark, che da sempre si occupava di attrezzature militari e tattiche quando lavorava nei "Berretti Verdi", decidono di unire le loro competenze e la loro passione con l'obiettivo di costruire coltelli innovativi e funzionali utilizzando materiali di altissimo livello qualitativo e interamente fatti negli Stati Uniti.

Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: in acciaio inox CPM-S35VN 59/60HRC
Trattamento Lama: Flat Dark Earth SpartaCoat
Manicatura: 
Lunghezza lama: 60mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 58g.
Chiusura: -
Clip: -
Fodero: in Kydex
Confezione: -
Note: 

Spartan Blades - Phrike - Self-Defense Utility Black - Knife

** WARNING: OTHER THAN AS SHOWN IN THE PHOTO PRODUCT IS AVAILABLE ONLY WITH KYDEX SHEATH**

Type of production: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN 59/60HRC
Treatment Blade: SpartaCoat - PVD - DLC
Handle: G-10
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Total length: 215mm.
Thick when closed: -
Balance: -
Weight: 115g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: -
Notes: Design by Iovito / Carey

SpartaCoat - PVD - DLC

Spartan Blades - Phrike - Self-Defense Utility Desert - Knife

Type of production: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN 59/60HRC
Treatment Blade: Flat Dark Earth SpartaCoat
Handle: G-10
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Total length: 215mm.
Thick when closed: -
Balance: -
Weight: 115g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: -
Notes: Design by Iovito / Carey

Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: in acciaio inox CPM-S35VN 59/60HRC
Trattamento Lama: Flat Dark Earth SpartaCoat
Manicatura: Canvas Micarta con lavorazione 3D
Lunghezza lama: 140mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 285mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 235g.
Chiusura: -
Clip: -
Fodero: in Nylon, con attacchi MOLLE
Confezione: -
Note: Design by Kim Breed

The Spartan-Breed Fighter/Dagger is our first collaboration with knife maker, writer, and retired Green Beret, MSG(R) Kim Breed. The Breed Fighter/Dagger was produced with the goal of creating a sturdy fighter in the spirit of our Special Operations Forces. Daggers have come to symbolize the elite of our military special operations units and agencies since the forming of the OSS. In that spirit, we worked with Kim to create a fighter/dagger that could be used while conducting missions on the modern battle field.
The blade allows for deep penetration, all while allowing the user to index the blade by touch and feel. The ergonomic and textured micarta handle is specifically designed with comfort and confidence in of grip.
Note: Double edge may be ordered with an unsharpened on top edge to comply with some state and/or local laws, please insure you follow the laws of your state and locality when ordering this knife.

 
Specifications:
Knife Name:  Spartan-Breed Fighter-Dagger
Designer:  Kim Breed
Overall Length:  11"
Blade Length:  5.5"
Blade Thickness:  3/16"
Blade Steel:  CPM S35VN
Blade Hardness:  58-60 HRC
Blade Style:  Full Tang Dagger— Flat saber grinds with optional unsharpened top edge.
Coating:  SpartaCoat - Black PVD - Tungsten DLC or Flat Dark Earth - ZrN
Handle Material:  3D Contoured CE Canvas Micarta® Black or Green
Weight:  8.13 Oz
 
Note:  Please select blade color, double or single edged, sheath type/color and handle color before adding to cart