Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Mac Coltellerie - 630 Training Knife - training knife
Intended use: training knife with rounded edge and tip
Type of production: industrial
Blade: stainless steel W 1.4028 - 55-56HRC
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 160mm.
Blade thickness: 4mm.
Total length: 290mm.
Balancing: advanced to 1cm from the guard branch
Weight: 296g. (378g. With scabbard)
sheath: in ABS
Note: -11026 -
Mac Coltellerie - San Marco Fighting Knife D2 - knife
Intended use: Military / Tactical / Collection
Type of production: industrial
Blade: 60-61HRC D2 Tool Steel
Blade treatment: Black Idroglider
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Design by Sandro Martinelli and Marco BellaniMAC-SM-D2 -
Muela - Bushcraft Machete Knife - knife
Machete
Intended use: sports
Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Spain
Handle: wood
Blade length: 170mm.
Blade thickness: 5mm.
Length closed: -
Total length: 35mm.
Balancing: -
Weight: 638g.
Closing: -
Clip: -
Sheath: Leather
Note: late 90s production "MU-MACHETE€106.56Out of stock -
Muela - Duetto 22 - Bowie and Folder Knives - knife
Duetto knife - Bowie with folding knife
Bowie
Intended use: sports
Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Spain
Handle: wood
Blade length: 210mm.
Blade thickness: 5.5mm.
Length closed: -
Total length: 342mm.
Balancing: -
Weight: 426g.
Closing: -
Clip: -
Sheath: Leather
Note: late 90s production "Folder
Intended use: sports
Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Spain
Handle: wood
Blade length: 98mm.
Blade thickness: 3mm.
Length closed: -
Total length: 222mm.
Balancing: -
Weight: 184g.
Closing: -
Clip: -
Note: late 90s production "MU-22€118.85Out of stock -
Mac Coltellerie - Survival knife XJ24 - knife
Intended use: outdoor / survival
Type of production: industrial
Blade: 420 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 240mm.
Blade thickness: 4.7mm.
Total length: 375mm.
Weight: 460g. (626g. With scabbard)
sheath: in leather
Note:XJ24 -
Valyrian Steel - Catspaw VS0102 Blade - Game of Thrones Game of Thrones
A blade of Valyrian steel that Catelyn Stark recovered from the assassin sent to finish her son Bran. It was taken to King’s Landing by Lady Stark and shown to Petyr Baelish, who identified it as belonging to Tyrion Lannister. This adult collectible is officially licensed from HBO®'s hit series Game of Thrones® and is an edition strictly limited to 2500 pieces.
The Game of Thrones® Collection is a series of collectible weapons and armor painstakingly recreated from the actual props used on HBO®’s hit fantasy epic Game of Thrones®. The officially licensed collectibles are made from the highest quality materials and have been crafted with special attention to reproduce the authentic details found on the props.
This item is not a toy, please keep out of the reach of children. This replica is intended solely for display purposes as a collector's item. Official HBO Licensed Product © 2012 Home Box Office, Inc. All Rights Reserved. Game of Thrones is a trademark of Home Box Office, Inc. Produced under License by Jalic Inc.
Overall Length: 19.5"
Blade Length: 10"
Blade Material: High carbon damascus steel
Handle: Faux "dragon bone" grip with 24k gold plated metal parts.
Plaque: Silkscreened wood with Game of Thrones® motif.VS0102€409.02Out of stock -
Mac Coltellerie - Tekno Daga 2 - diving knife
Country of manufacture: Italy
Blade: Stainless steel W 1.4116 55/56HRC
Blade finish: Idroglider Gold Black
Handle: PP with TPE overmolded
Blade length: 105mm.
Blade thickness: 3.8mm.
Total length: 210mm.
Weight: 140g.
Sheath: ABS with rubber ties for calf or forearm attachmentTKN10D-2N -
Mac Coltellerie - Z08 - knife
Destination: Military/Tactic/Collection
Type of manufacturing: industrial
Blade: W 1.4116 inox
Blade Treatment: IDROGLIDER GOLD® Black
Made in: Italy
Handle: Nylon reinforced with fiber glass, PP and TPE
Blade Length: 160mm.
Blade Thickness: 4,5mm.
Total Length: 290mm.
Balancing: on knife's guard
Weight: 288g. (with sheath 534g.)
Sheath: cordura with thigh band
Note: -11028 -
Mac Coltellerie - CQB Training Knife - coltello da allenamento
Destination: training knife, rounded point and dull edge
Type of manufacturing: industrial
Blade: stainless steel W 1.4116 - 55-56HRC
Blade Treatment: stonewash
Made in: Italy
Handle: polymers, REMOVABLE
Blade Length: 160mm.
Blade Thickness: 4mm.
Total Length: 290mm.
Balancing: toward the point, at 1 cm from knife guard
Weight: 314g. (474g. with sheath)
Sheath: cordura, with thigh band
Note: -11027 -
Mac Coltellerie - Tekno Training Knife - coltello da allenamento
Destination: training knife, rounded point and dull edge
Type of manufacturing: industrial
Blade: stainless steel W 1.4116 - 55-56HRC
Blade Treatment: stonewash
Made in: Italy
Handle: polymers
Blade Length: 97mm.
Blade Thickness: 3,5mm.
Total Length: 202mm.
Balancing: on knife guard
Weight: 170g. (212g. with sheath)
Sheath: cordura
Note: -11025 -
Mac Coltellerie - San Marco Fighting Knife RWL Limited Edition - knife
Intended use: Military / Tactical / Collection
Type of production: industrial
Blade: 59-60HRC RWL 34
Blade treatment: blackwash
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Limited Edition 2019 numbered on the blade - Design by Sandro Martinelli and Marco BellaniMAC-SM-RW -
Mac Coltellerie - San Marco Fighting Training Knife - training knife
Intended use: training knife with rounded edge and tip
Type of production: industrial
Blade: 440 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 314g.
sheath: in cordura
Notes: Design by Sandro Martinelli and Marco BellaniMAC-SM-TR -
Mac Knives - Sub Tekno Titanium - knife
Mac Knives - Sub Tekno Titanium - knife
Intended use: Underwater
Type of production: Industrial
Production Blade: Italy
Blade: Titanium beta
Treatment Lama: -
Handle material: PP TPE overmolded
Blade length: 108mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 210mm.
Thick when closed: -
Balance: -
Weight: 98g.
Closing: -
Clip: -
Sheath: ABS with rubber straps for fastening the calf
Packaging: Cardboard box with logos MAC
Notes:2310T -
Muela - Colibri Hunting Knife - Pakkawood - COL-9R - knife
Intended Use: Hunting / Sporting
Type of production: Industrial
Country of Production: Spain
Blade: Stainless steel 1.4116
Blade treatment: Satin finish
Handle: Brass and Pakkawood
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 155mm.
Weight: 84g.
Sheath: leather
Packaging: -
Notes: 1990s vintage knifeCOL-9R€73.77Only 0 leftOut of stock