Sport, Military and Collectible Knives | Coltelleria Collini

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: stainless steel and G10 folders
Blade length: 93mm.
Blade thickness: 3.2mm.
Total length: 218mm.
Weight: 159g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
Notes: Design by Vaeringi - tungsten carbide backstop - ball bearing opening system

In designing the Belone, Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern, minimalist style that has made him famous worldwide. The result is a light, tapered folding knife embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting qualities, and the ball bearings make it the fastest flipper opening, perfectly integrated into the overall design. The carefully crafted ergonomically designed handle has an anodized titanium frame enclosed between thin carbon fiber folders. The Belone's clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.

Intended Use: Sporting / EDC

Production type: Industrial
Country of manufacture: Italy
Blade: Stainless steel M390 60-61HRC
Blade Treatment: Satin finish
Handle: Stonewashed titanium and forged carbon fiber "Dark Matter" in blue color
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thickness when closed:11.3mm.
Weight: 78g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

Intended Use: Utility

Production type: Industrial
Country of Production: Germany - Solingen
Blade: ful tang 80CrV2 steel
Blade finish: Stone Washed
Handle: TPE
Blade length: 89mm.
Blade thickness: 3.5mm.
Total length: 210mm.
Weight: 137g.
Sheath: kydex
Packaging: cardboard box with Boker Germany logos
Notes: -

Intended use: collectible / sporting

Type of production: Industrial
Country of Production: Italy
Blade: Elmax steel at 61HRC
Blade finish: satin-finished
Handle: Made of anodized titanium and Fat Carbon with blue highlights
Blade length: 80mm.
Blade thickness: 3.4mm.
Total length: 175mm.
Weight: 92g.
Closure: Frame Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is BOHLER N690Co with black Black Top Shield cover and G10 handle for the best possible grip.


Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: G10, with embedded stainless steel liners and anodized aluminum spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 100g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX Voxnaes

Intended Use: Tactical/Sporting

Production type: Industrial
Country of Production: Italy
Blade: Elmax SuperClean 59/61HRC stainless steel
Blade Finish: Stonewashed
Handle: canvas micarta handle, 1.4116 stainless steel liners and GR2 titanium spacer
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 210mm.
Weight: 145g.
Closure: liner lock with integrated Smart Automatic Safe Lock System.
Clip: stainless steel 1.4116, removable and reversible
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio "Silvester" Silvestrelli

A pocket-sized and compact EDC knife featuring an M390 steel blade with a satin finish and a SOLID® (one-piece) handle with titanium ferrule.

The SOLID® handle is available in several variants, and its ergonomic shape fits the palm of the hand perfectly, allowing for very precise handling.

Type of use: hiking / hunting / light utility

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: Full tang, stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Micarta and Titanium
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 150mm.
Balance: central
Weight: 57g. (99g. scabbard included)
Sheath: leather, belt, with vertical port
Packaging: cardboard box with Lion Steel logos
Notes: design by the well-known knife-maker Gianluigi "Wilson" Simonella, a lifelong maker of custom knives, as well as a craftsman of material and a founding member of the Corporazione Italiana Coltellinai (CIC)

A pocket-sized and compact EDC knife featuring an M390 steel blade with a satin finish and a SOLID® (one-piece) handle with titanium ferrule.

The SOLID® handle is available in several variants, and its ergonomic shape fits the palm of the hand perfectly, allowing for very precise handling.

Type of use: hiking / hunting / light utility

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: Full tang, stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Green Micarta and Titanium
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 150mm.
Balance: central
Weight: 57g. (99g. scabbard included)
Sheath: leather, belt, with vertical port
Packaging: cardboard box with Lion Steel logos
Notes: design by the well-known knife-maker Gianluigi "Wilson" Simonella, a lifelong maker of custom knives, as well as a craftsman of material and a founding member of the Corporazione Italiana Coltellinai (CIC)

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended Use: Utility / Hiking

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut 63/65HRC tool steel
Blade finish: Satin finish
Handle: Marble Carbon Fiber with FDE stainless steel folders
Blade Length: 82.6mm.
Blade thickness: 3.6mm.
Length closed: 111mm.
Total length: 193mm.
Handle thickness: 16mm.
Weight: 130g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, stainless steel with FDE finish
Packaging: cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: high-carbon steel blade, not stainless; wash and dry carefully after use and grease in case of storage

Rigorous efficiency or flexible dynamics? - A question that doesn't even arise for Alessandra de Santis's Boker Plus Gemtek. It can do both, not to mention the nuances in between. The designer from Hydra Design is known for her spirited creations with maximum functionality.

The Gemtek confidently joins this series and presents itself as a folding knife with a Frame Lock mechanism, featuring a Modified-Droppoint blade in high-performance D2 steel, which opens with a Flipper and impresses with its stonewash finish and a decorative false edge.

The handle front is made of gray G10, equipped with a discreet triangular texture for optimal grip. Carefully balanced elements such as the red spacers with an integrated loop and a G10 triangle on the back, reflecting the structure of the handle's front, elegantly complete the pocket knife's appearance.

The Tip-Up (r) clip allows for deep carry, ensuring the knife almost entirely disappears in the pants pocket. It comes with a high-quality nylon case for storage.

Intended use: Tactical

Type of production: Industrial
Country of production: Taiwan
Blade: in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 72mm.
Blade thickness: 3.7mm.
Total length: 176mm.
Weight: 132g.
Clip: removable stainless steel
Locking mechanism: Frame Lock
Packaging: nylon zippered case - cardboard box with Boker Plus logos
Notes: opening with Carson Flipper system on ball bearings - design by Alessandra De Santis

Functionally flawless, this full-tang knife integrates a transport system and everything you need for bushcraft and adventure. Venture Pro is ready for outdoor adventure, just as its name suggests. The proven flat grind geometry excels in precision cutting, and an integrated arch groove turns the knife into an ideal tool for fire starting. Discover bushcraft at the highest levels.

Full-tang outdoor knife with transport system

Fixed-blade knife made in Switzerland from high-quality steel

Non-slip handle with an arch groove

Intended Use: Sporting

Production Type: Industrial
Country of Production: Switzerland
Blade: 14C28N stainless steel
Blade Finish: Satin
Handle: Rubber
Blade Length: 100mm.
Blade Thickness: 3.5mm.
Overall Length: 228mm.
Weight: 152g.
Sheath: Plastic material
Packaging: Cardboard box with Victorinox logos
Notes: -

Tools
Protruding End with
Firestarter Tube
Bow Drill Pin
Hex Hole
Cord Hole
Flint
Tweezers
Pressurized Ballpoint Pen

We proudly introduce the latest innovation from Victorinox, perfect for outdoor adventures.

Discover the Venture collection: a range of expertly crafted fixed-blade knives, ideal for bushcraft.

Made with high-quality materials renowned for their exceptional durability, they offer rock-solid strength and effortlessly conquer any challenges in outdoor environments.

From hiking to camping and wilderness survival, these knives are ready to tackle any situation.

A fixed-blade bushcraft knife that takes on every adventure with a unique style. Developed by outdoor activity experts, this dependable "specialist kit" simplifies any challenge. The Venture features a drop-point blade for precise cutting, a sharp 90° spine for easy fire starting, and a protective sheath for the blade.

Intended Use: Sport

Production Type: Industrial
Country of Production: Switzerland
Blade: 14C28N stainless steel
Blade Finish: Satin
Handle: Micarta
Blade Length: 100mm.
Blade Thickness: 3.5mm.
Overall Length: 228mm.
Weight: 152g.
Sheath: Plastic material
Packaging: Cardboard box with Victorinox logos
Notes: -

Designed by Tommaso Rumici, the knife is "muscular" and unique, combining the Camaro Z28's distinctive features of shape and strength. The elegant Damascus blade, hand forged by Chad Nichols with 80 layers in the "Tread" pattern, is reminiscent of the muscle car's sloping hood. To that end, parts from the upper suspension arm of the original vintage Camaros were used to forge the blade.

Based on an analysis of the color of an original model, the "Le Mans Blue" lacquer finish was created especially for Boker for the aluminum handle, which interprets the body lines in a nostalgic way and is enriched with exciting details. The notchback, small rear spoiler and slat-shaped air intakes on the rear fenders have been beautifully integrated into the knife. The blade axle screw is lovingly inspired by the rims often used on muscle cars, while the straight-line stainless steel clip, milled from billet, is reminiscent of chrome door handles.




Intended Use: Sporting / Collection

Type of production: Industrial
Country of manufacture: Germany - Solingen
Blade: Handcrafted Damascus "Tred" by Chad Nichols made from the suspension of old Camaros
Handle: Aluminum painted "Le Mans Blue" metallic color
Blade length: 80mm.
Blade thickness: 3.6mm.
Total length: 186mm.
Weight: 99g.
Closure: Liner Lock
Clip: stainless steel
Packaging: Display case with Boker logos, fabric knife case, warranty certificates
Notes: Limited edition numbered on the back of the knife

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: China
Blade: D2 tool steel at 59/61HRC
Blade treatment: Black PTFE
Handle: G-10
Blade length: 90mm.
Blade thickness: 3.4mm.
Total length: 195mm.
Weight: 115g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii Matveev

Usage prévu : EDC / Sport

Type de production : Industriel
Pays de production : Chine
Lame : Acier à outils D2 à 59/61HRC
Traitement de la lame : PTFE noir
Manche : G-10
Longueur de la lame : 55mm.
Epaisseur de la lame : 3.5mm.
Longueur totale : 132mm.
Poids : 90g.
Clip : Acier inoxydable, amovible et réversible
Fermeture : Liner Lock
Emballage : boîte en carton avec les logos BlackFox
Notes : Design par Grigorii Matveev

Intended Use: EDC / Sporty

Type of production: Industrial
Country of Production: China
Blade: D2 tool steel at 59/61HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade Length: 55mm.
Blade thickness: 3.5mm.
Total length: 132mm.
Weight: 90g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii Matveev

The Spyderco Paramilitary 2 is one of the most popular knives on the market, known for its high build quality, premium materials, attractive aesthetics, and ease of one-handed use. These characteristics have made it very popular among soldiers, builders, hunters, survivalists, and everyday knife carriers around the world. Every knife enthusiast should have a PM2 in their collection.

The Paramilitary 2 is available in numerous versions, with different colors and materials for the blade and handle. However, it should be noted that, due to the full liners, this knife is not compatible with most aftermarket components.

The Paramilitary 2 is the second version of the old Para Military, a model designed by Spyderco as a more compact and accessible version of their Military model. If you're looking for something even more compact, the Para 3 might be the right choice.

Intended use: Sporting / Collection

Type of production: Industrial
Blade production: USA
Blade: In CPM-CRUWEAR stainless steel
Blade treatment: Satin
Handle: Micarta
Blade length: 87mm.
Blade thickness: 3.5mm.
Closed length: 122mm.
Total length: 210mm.
Closed thickness: -
Balance: -
Weight: 110g.
Closure: Compression Lock
Clip: in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended use: Tactical/Military

Blade: AUS-8 56/58HRC stainless steel
Taiwan blade production
Handle: Aluminum
Blade length: 100mm.
Blade thickness: 3.5mm.
Closed length: 135mm.
Total length: 235mm.
Balancing: -
Weight: 155g.
Closure: Liner Lock
Clip: removable and reversible in stainless steel
Scabbard: -
Notes: design by Carson - AutoLAWKS safety catch

The little fish that rules every pond. Though small, the Tuna Compact evokes the power of one of the world's largest and fastest fish.

It takes the subtle elegance of designer Lucas Burnley's original Tuna and shrinks it into an ultra-compact folding knife. With a profile that suggests strong forward momentum and a blade shape that resembles a deep-sea carnivore, this everyday knife slices through packs and boxes faster than a bluefin tuna slices through waves on a taut line.

* Smooth opening: IKBS™ ball-bearing motion allows for a smooth blade opening.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily.
* Easy opening: The thumb engagement pin allows for quick one-handed opening.
* Exceptional grip: G10 handle provides exceptional grip in all conditions
* Brute force: Fame Lock system uses a thick locking bar to hold the blade in place
* Low profile: Pocket clip ensures safe and secure carrying away from prying eyes

Intended Use: EDC / Sporting

Production Type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: StoneWashed
Handle: G10 and BlackWashed stainless steel
Blade Length: 69mm.
Blade thickness: 3.6mm.
Length closed: 97mm.
Total length: 163mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS ball bearing opening system

Timeless engineering and lived history! Inspired by a true air classic, Boker Plus presents the P-51 Damast by Steve Kelly as a designer knife with exceptional character. Based on the North American P-51 Mustang, the knife mirrors the material, shape and color of the 1940s fighter plane, creating almost a replica of its historic model.

Some 15,800 examples of this low-wing aircraft were produced in various versions between 1940 and 1948, making it still one of the most built military aircraft in the world today. The P-51 D is the most widespread series, with just under 8,000 examples. The special features of the P-51 Mustang, whose "P" in the name stands for Pursuit, lay in its full-metal aerodynamic construction with characteristic flared pins, which in combination with the massive Packard Merlin V-1650 engine allowed a top speed of 700 km/h with an extraordinary range of up to 3,300 km. These achievements were considered revolutionary at the time and led to the air supremacy of the United States Army Air Forces during World War II.

It was not only the unmistakable lines of the P-51 Mustang that prompted Boker's development department to undertake this exciting project. The challenge was to transfer the design language and performance of the combat aircraft into a knife without compromising elegance and practicality.

The heart of the Boker Plus P-51 Damast is its distinctive 80-ply Damascus spearhead blade, forged by Chad Nichols in the United States and composed of original parts from the historic fighter plane. Viewed from the side, the blade has a number of visual reminiscences of the historic fighter-bomber. The thumb hole, for example, is reminiscent of the Plexiglas cockpit canopy, which allowed the pilot an ideal all-around view.

Another prominent feature is the titanium handle, which mimics the aircraft's studded light metal plates to the smallest detail. The blue blade axis screw, which bears the U.S. Army Silver Star, and the red anodized screws, which echo the color scheme of the tail rudder, stand out.

Intended Use: Sporting/collection

Type of production: Industrial
Country of manufacture: Taiwan
Blade: Handcrafted 80-ply Damascus by Chad Nichols from original P51 Mustang parts
Blade Finish: -
Handle: Titanium
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 193mm.
Weight: 10g.
Clip: titanium, removable
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zippered pouch, warranty certificate
Notes: Carson Flipper-type opening system on ball bearings

Intended Use: Neck / EDC / Sporting

Production type: Industrial
Country of Production: China
Blade: full tang, D2 steel
Blade finish: TPFE
Handle: Micarta and Copper
Blade length: 55mm.
Blade thickness: 3.5mm.
Total length: 98mm.
Weight: 48g.
Sheath: kydex, neck, with chain
Packaging: Cardboard box with Boker Plus logos
Notes: Design by Jesper Voxnaes

Intended Use: EDC / Rescue

Production type: Industrial
Country of manufacture: China
Blade: Steel 440 HRC 55-57
Blade treatment: varnishing
Handle: G10
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 208mm.
Weight: 162g. (197g. including scabbard)
Clip: -
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: glass breaker - 7, 8 and 10 mm bolt insert - oxygen cylinder opening insert - nylon sheath

Lucas Burnley's Boker Plus Kwaiken Flipper is arguably one of the most influential designs of the 21st century. With its clear and practical shape, this modern pocket knife has become a true icon. The clean lines and slim design, which nevertheless accommodates the entire blade when closed, are absolutely unique.

It is the further development of the well-known Burnley Kwaiken Classic, a knife also in the neo-Japanese style. The flipper ensures intuitive operation and increased safety, while the titanium framelock with stainless steel insert securely locks the M390 steel ball bearing blade.

The exclusive claim of this premium version, strictly limited to 500 pieces worldwide, is underlined by the carbon fiber handle scales with green inserts. The slim design and exclusive material make the Kwaiken a noble crossover between a gentleman's tool and a tactical combat knife.

To make this connection even easier, the Kwaiken Mini Limited offers the same outstanding qualities of its big brother with significantly smaller (and therefore more pocket-friendly) dimensions. The titanium clip is milled from solid, allowing it to be tipped up (r). Supplied with high quality nylon case.

Intended use: Sports/collection

Type of production: Industrial
Country of production: Taiwan
Blade: M390 steel
Blade treatment: satin finish
Handle: in titanium and carbon fiber
Blade length: 78mm.
Blade thickness: 3.2mm.
Total length: 184mm.
Weight: 79g.
Clip: removable, in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley limited edition of 500 pieces - pinball opening system on ball bearings

Nahuel means jaguar in the Mapuche language, the indigenous people of Argentina and Chile. Boker Arbolito's new folding knife design is equally robust and elegant. The main feature of this handle with linerlock block is the presence of light Guyacan ebony on both sides.

This gives the knife a nice feel and a warm look. Another eye-catching detail is the spacer, which is also made in Guyacan. The Böhler N678 stainless steel teardrop blade is easy to open via a flipper, which offers reliable finger protection when folded.

A deep pocket clip embedded in the wood allows for fold-down / right-handed carry.

Intended use: Hunting / Utility

Type of production: Industrial
Country of production: Argentina
Blade: N678Co 58HRC stainless steel ful tang
Blade finish: Satin
Handle: ebony
Blade length: 82mm.
Blade thickness: 3.38mm.
Total length: 200mm.
Weight: 151g.
Sheath: reversible clip
Packaging: cardboard box with Boker logos
Note: -

The great success of the Boker M4 Sherman Damascus, due not only to the history of the historic Damascus steel but also to the design, prompted us to use this as the basis for a performing and pleasant EDC with a titanium framelock, which, despite the metallurgy of the blade powders, also carries a real piece of M4 Sherman Damascus.

For the blade of the Sherman EDC we used Magnacut for the first time, which is not without reason celebrated as a "miracle steel". Unlike the usually used tool steels, this steel was specially developed for the production of knives. The three desirable properties of a steel - edge retention, toughness and resistance to rust (stainless in the DIN category) - represent a conflict of goals. To make the steel resistant to rust, the addition of chromium is necessary, which makes the structure coarse, brittle and prone to fracture under normal conditions. The high hardness, which has a positive influence on the cutting life, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it was possible to achieve a very fine microstructure and thus a high toughness and shock load tolerance. The addition of nitrogen plays a central role here.

The central structural difference compared to the M4 Damascus model is the elegantly integrated flipper, which allows the blade to open smoothly with a small impulse.

A special highlight of the Boker Sherman EDC is the protruding Damascus backspacer, which is equipped with a lanyard hole in an elongated slot design. The Damascus of the backspacer was forged from various materials from Chad Nichols' M4 Sherman tank production in the Customized Ladder pattern and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: MagnaCut steel
Handle: in steel and micarta
Blade length: 75mm.
Blade thickness: 3mm.
Total length: 178mm.
Weight: 95g.
Clip: stainless steel
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: Certificate of Guarantee - Case in gray box

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Stonewashed
Handle: G10 Two-tone
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Weight: 105g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended Use: Sporting / Hunting

Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Carbon Fiber
Blade length: 67mm.
Blade thickness: 3.5mm.
Total length: 167mm.
Weight: 100g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

When Boker designed this Boker BRONCO fixed outdoor knife, it set ambitious goals;

- Universal and optimal usability for all professional outdoor users such as bushcrafters, campcrafters, survivalists, hikers, hunters, SAR teams and others. - A CPM steel blade, a handle that fits comfortably in your hand even when working for long periods of time. A quality leather sheath that can be worn with or without a pendant. 100% production in Solingen / Germany

- The CPM-3V was developed by Crucible Industries LLC - a world leader in the 62-63 HRC sintered metallurgical steel market.

The universal wide point blade with high saber sharpening has always been the hunter's favorite shape for both large and small game and is suitable for both precision and heavier tasks. The tang is continuous and protrudes a few millimeters from the end of the handle. This ensures maximum stability and the tang can withstand even powerful blows with a log or other object.

TPE - thermoplastic elastomer - was chosen as the material of the handle, which completely encloses the tang and has a structure that guarantees a good grip in any load direction. TPE is strong, elastic, non-slip and has low thermal conductivity.

The knife features a leather sheath featuring a 9.3cm metal firelighter from market leader Light My Fire, which fits into a large, snug leather ring firmly integrated into the piping.

These features make the BRONCO Boker a tool for survival in an environment also of wild nature, compact, versatile and complete, at the height of any situation.

Intended use: Utility

Type of production: Industrial
Country of production: Germany - Solingen
Blade: CPM 3V 62 / 63HRC ful tang
Blade finish: Satin
Handle: TPE
Blade length: 113mm.
Blade thickness: 3.4mm.
Total length: 230mm.
Weight: 147g.
Sheath: in leather, with flintlock
Packaging: cardboard box with Boker logos
Note:

The Messerschmitt Bf 109 was built from 1935 onwards and, with a production of around 33,000 aircraft, is the most widely produced fighter aircraft in the history of aviation. Officially, the type designation Bf 109 was never changed, even after BFW was renamed Messerschmitt AG. However, since all aircraft types later developed by Messerschmitt were given the model abbreviation ME, the name ME 109 also became established in the public consciousness for the Bf 109. In the 1930s, it marked the step towards a new generation of low-wing fighter aircraft with a closed pilot's cockpit, retractable landing gear and an all-metal construction of wings and fuselage. This new structure withstood far greater loads than the fabric-covered tubular constructions that had been common up to then, which also had the disadvantage of immense air resistance due to the necessary transverse bracing. As a result, the Messerschmitt's more compact and stable design allowed higher speeds with tighter radii during the cornering and dive maneuvers so crucial to fighter pilots. The Bf 109 was armed with two 20 mm MG FF machine guns in the wings and two 7.92 mm MG 17 machine guns. The latter were mounted directly in front of the pilot and coupled via an interrupter gear to the propeller shaft of the 1,000 hp Daimler V12 engine. In this way it was possible for the MGs to fire through the circular path of the spinning propeller without the projectiles hitting the rotating propeller blades. The MGs were thus very close to the pilot's line of sight. The pilot's seat was steel-plated inside the fuselage area to protect it from enemy fire.

The steel we were able to obtain for our Damascus project came from an E-series Messerschmitt Bf 109 that was shot down by a Royal Airforce Supermarine Spitfire in 1940 during the Battle of Britain near the village of Ashford in the British county of Kent. The specific parts are the rear plate of the pilot's steel-plated seat and the bearing sleeve of the propeller shaft. These are forged by Chad Nichols into a high-carbon, high-cut 80-layer Damascus.

The Boker Plus ME 109 Damascus picks up numerous design elements of the legendary Messerschmitt. The opening at the back of the blade base has the unmistakable shape of the pilot's cockpit and is visible when the knife is closed and open. The folds in the sheet metal of the engine cowling as recesses for the barrel soul axles of the two MG 17s form the template for the schor at the tip of the blade. The flipper indicates a wheel of the retractable landing gear. For the front carbon fiber shell, the material Toxic Storm from the manufacturer Fatcarbon Materials was chosen in the colors green, black and yellow. The color scheme is based on the characteristic camouflage paint of the Bf 109 with greenish-gray undercoat and yellow front fuselage. The opposite side has a titanium framelock with an elaborately integrated carbide contact surface. A beautifully designed and elaborately integrated clip allows the Boker Plus ME 109 to be worn tip-up on the right. Supplied with a high-quality case for storage and a certificate of authenticity.

Intended use: Sports / collection

Type of production: Industrial
Country of production: Taiwan
Blade: Damascus steel
Blade finish: -
Handle: in carbon fiber and titanium
Blade length: 80mm.
Blade thickness: 3.6 mm.
Total length: 180mm.
Weight: 66 g.
Clip: in stainless steel, removable
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zip case, guarantee certificate
Notes: pinball opening on bearings

Intended Use: Utility / Hiking / Tactical

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-D2 steel 60/62HRC
Blade Finish: Cobalt Black
Handle: Grivory
Blade Length: 90mm.
Blade thickness: 3.2mm.
Length closed: 120mm.
Total length: 211mm.
Handle thickness: 16mm.
Weight: 105g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, stainless steel
Packaging: cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: high-carbon steel blade, not stainless; wash and dry carefully after use and grease in case of storage

Timeless simplicity is the main reason why you will never get tired of your Z100.

In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush in stainless steel
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.

Anyone who knows how to take care of themselves outdoors will appreciate the reliability of the P200, which finds its greatest strength in its simplicity and no-frills design.

A high blade bevel combined with a low steel thickness is a must for any great cutting tool. Choosing to use a strong, stainless steel like Bohler N690Co will not affect the P200 even in challenging weather and usage conditions, even for long periods away from home. The low weight, flat G10 handle and compact size of the P200 ensure that your partner will never let you down in terms of weight and bulk either, because we know how important every single gram is when hiking.

Intended use: hiking / utility

Type of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel N690Co 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total lenght: 220mm.
Weight: 150g.
Scabbard: Black leather, sewn and handmade.
Package: Cardboard box with ANV logos
Notes: -

Anyone who knows how to take care of themselves outdoors will appreciate the reliability of the P200, which finds its greatest strength in its simplicity and no-frills design.

A high blade bevel combined with a low steel thickness is a must for any great cutting tool. Choosing to use a strong, stainless steel like Bohler N690Co will not affect the P200 even in challenging weather and usage conditions, even for long periods away from home. The low weight, flat G10 handle and compact size of the P200 ensure that your partner will never let you down in terms of weight and bulk either, because we know how important every single gram is when hiking.

Intended use: hiking / utility

Type of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel N690Co 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total lenght: 220mm.
Weight: 150g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos
Notes: -

Intended Use: Rescue Tool / Utility

Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 45mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 80g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso Rumici

Thrill Aluminum is the SlipJoint knife with clip that can be inserted inside the handle in case of need thanks to the lionSTEEL HWAY.L - Hide What Annoys You system.

Designed by Molletta, it is equipped with a “no locks” mechanism and has a SOLID® Knife handle, made from a single block of aluminum. The handle, light and easy to grip, is available in black, red, green and orange.

The blade is in Scrambled damask (Chad Nichols).

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Italy
Blade: Chad Nichols Stainless Damascus
Blade treatment: Satin
Handle: Titanium machined from solid
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 18mm.
Weight: 88g.
Closure: SlipJoint with steel flap
Clip: retractable, machined from solid
Packaging: cardboard box with LionSteel logos
Note: -

On the occasion of the theatrical release of the highly anticipated film Diabolik, directed by the Manetti Bros with Luca Marinelli, Miriam Leone and Valerio Mastandrea, we present the new version of Diabolik's knife, one of the most loved figures by fans of noir comics. Created in collaboration with the Astorina publishing house, we offer the new official "replica" version of the famous Throwing Knife of the King of Terror.

The new “999 \ LG Diabolik” throwing knife in special edition, replica features and style of the knife drawn in the original comic strips. Unlike the model made for the previous 50th, we have made some important changes. Like the logo of the anti-hero, Diabolik, in 24k gold on the knife blade and the elegant walnut handle.

Type of production: Industrial
Production Lama: Italy
Blade: N690 satin-finished stainless steel with 24K gold Diabolik engraving
Blade treatment: -
Handle: walnut wood
Blade length: 160mm.
Blade thickness: 5mm.
Closed length: -mm.
Total length: 290mm.
Thick when closed: -mm.
Balancing: -
Weight: 265g.
Closure: -
Clip: -
Sheath: nylon, made in Italy, by Radar
Packaging: cardboard box with Maserin and Diabolik logos
Notes: Officially licensed collectible / exhibition product

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: Carbon Fiber, Titanium
Blade length: 84mm.
Blade thickness: 3.5mm.
Total length: 192mm.
Weight: 148g.
Clip: in steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Steve Kelly

Destinazione d'uso: Sportivo / Collezione

Tipo di produzione: Industriale
Paese di produzione: Taiwan
Lama: in acciaio inox VG-10
Trattamento lama: satinatura
Manicatura: in fibra di carbonio con cartella interna in acciaio inox
Lunghezza lama: 82mm.
Spessore lama: 3.4mm.
Lunghezza totale: 182mm.
Peso: 58g.
Clip: in acciaio inox
Chiusura: liner lock
Confezione: scatola di cartone con loghi Boker Plus, astuccio in nylon con zip
Note: Design by Chuck Gedraitis

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: titanium and carbon fiber marbled
Blade length: 77mm.
Blade thickness: 3.5mm.
Total length: 183mm.
Weight: 75g.
Clip: stainless steel
Closure: frame lock
Package: cardboard box with Boker Plus logos, nylon pouch with zipper
Notes: Design by Lucas Burnley - ball bearing flipper opening system

Intended Use: EDC/Sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/60HRC 
Blade treatment: Satin
Handle: Titanium billet
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thickness when closed: 18mm.
Weight: 88g.
Closure: SlipJoint with steel knocker
Clip: Retractable, machined from solid wood.
Package: cardboard box with LionSteel logos
Notes: -

Intended Use: Sporting / Hunting

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade Finish: Polished
Handle: Kray-Ex™
Blade length: 165mm.
Blade thickness: 3.5mm.
Total length: 298mm.
Weight: 159g.
Scabbard: Secure-Ex® in thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Notes: Made in collaboration with Tim Wells, one of the most famous bow and skeet hunters in the world.

Production type: Industrial

Country of Production: USA
Blade: Stainless steel 440C
Blade treatment: Black Traction Coating
Handle: Stainless steel 440C
Blade Length: 56mm.
Blade thickness: 4.45mm.
Total length: 158mm.
Weight: 85g.
Scabbard: polymer, with clip attachment
Packaging: cardboard box with Benchmade logos
Notes: Design by Greg Thompson

Intended Use: Utility / Hiking / Tactical

Production Type: Industrial
Country of Production: USA
Blade: Tool steel CPM-CRUWEAR 63/65HRC
Blade Treatment: Gray tungsten
Handle: G10 with PVD stainless steel folders
Blade length: 97mm.
Blade thickness: 3.6mm.
Length closed: 132mm.
Total length: 227mm.
Handle thickness: 16mm.
Weight: 182g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: High carbon steel blade, not stainless; wash and dry carefully after use and grease in case of storage

Intended Use: Utility / Hiking / Tactical

Production Type: Industrial
Country of Production: USA
Blade: Tool steel CPM-CRUWEAR 63/65HRC
Blade Treatment: Tungsten Flat Earth
Handle: G10 with PVD stainless steel folders
Blade length: 82.6mm.
Blade thickness: 3.6mm.
Length closed: 111mm.
Total length: 193mm.
Handle thickness: 16mm.
Weight: 130g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: High carbon steel blade, not stainless; wash and dry carefully after use and grease in case of storage

Intended Use: Utility / Hiking / Tactical

Manufacturing Type: Industrial
Country of Production: USA
Blade: Tool steel CPM-CRUWEAR 63/65HRC
Blade Treatment: Gray tungsten
Handle: G10 with PVD stainless steel folders
Blade length: 82.6mm.
Blade thickness: 3.6mm.
Length closed: 111mm.
Total length: 193mm.
Handle thickness: 16mm.
Weight: 130g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: High carbon steel blade, not stainless; wash and dry carefully after use and grease in case of storage

The 15002-1 Saddle Mountain Skinner is a premium hunting fixed blade knife designed for hunters around the world. Light, handy and robust, this knife is effective on medium / large game. The sheath, redesigned from the previous version, creates a slim, comfortable and safe housing. Improved geometry, ergonomics and materials used, this Benchmade model will not disappoint the expectations of even demanding hunters.

Intended use: Utility / Hiking / hunting

Type of production: Industrial
Production Lama: USA
Blade: CPM-S90V stainless steel (59-61 HRC)
Blade treatment: Satin
Handle: Richlite / Orange G10
Blade length: 106mm.
Blade thickness: 3.5mm.
Total length: 221mm.
Weight: 121g.
Sheath: in Boltaron® Thermoplastics
Packaging: Cardboard box with Benchmade logos
Note: -

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -

Intended use: Sports

Type of production: industrial
Blade: full tang, in 7Cr17MoV stainless steel
Blade finish: stonewash
Country of production: China
Handle: aluminum
Blade length: 73mm.
Blade thickness: 4.5mm.
Total length: 148mm.
Balancing: backward
Weight: 170g.
Sheath: ABS with multi-position belt attachment
Note: -

Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -

Intended use: sports

Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel CTS-XHP
Blade treatment: Stonewashed
Handle: Titanium
Blade length: 64mm.
Blade thickness: 3.5mm.
Closed length: 88mm.
Total length: 152mm.
Thick when closed: -
Weight: 99g.
Closure: R.I.L. Reeve Integral Lock (Frame Lock)
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: Design by Marcin Slysz

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Taiwan
Blade: 4033 stainless steel
Blade treatment: Satin finish
Handle: Zy-Ex
Blade length: 92mm.
Blade thickness: 3.3mm.
Length closed: 122mm.
Total length: 212mm.
Thick when closed: 14mm.
Weight: 120g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: stainless steel, removable
Packaging: cardboard box with Cold Steel logos
Notes: opening system by carson flipper system - Design by Wes Crawford

Destination of use: sports

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: satin finish
Handle: Ziricote wood with stainless steel liners
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 14.5mm
Weight: 106g.
Closure: LinerLock
Clip: stainless steel, removable
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Jens Anso

In designing the Belone, the Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern and minimalist style that made him famous all over the world. The result is a light and tapered folding knife, embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting properties, and the ball bearings make it the opening with the very fast pinball machine, perfectly integrated into the overall design. The handle, with well-kept ergonomics, has an anodized titanium structure, enclosed in thin titanium folders.
The Belone clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.
Intended use: Gentleman / EDC

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thick when closed: 11.3mm.
Balancing: -
Weight: 87g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

ROK, which is part of the SOLID knives family made from a single piece of aluminum or titanium, has two important innovations:

* the introduction of the new H.WAYL System; it is a LionSteel patent that allows the clip to disappear inside the handle when using the knife. The clip can appear only when needed.

* the introduction of NFC technology into the knife box. With this system the user no longer has to look for the information on the product, but it is the knife itself that makes them available: indications for maintenance, in-depth information on the production process, or more general information about LionSteel.

As was already the case with the TRE model, the user has the possibility to remove the pinball machine, opting for a more traditional two-handed blade opening. Also on the ROK there is the Rotoblock safety system and a steel tip on the end of the blade locking bar: in this way it is possible to prevent breakage or wear caused by the blade itself.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Black PVD
Handle: Aluminum
Blade length: 86mm.
Blade thickness: 4.5mm.
Total length: 198mm.
Thickness when closed: -mm.
Weight: 130g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: concealed, made from solid
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings - possibility to remove the pinball system guard

ROK, which is part of the SOLID knives family made from a single piece of aluminum or titanium, has two important innovations:

* the introduction of the new H.WAYL System; it is a LionSteel patent that allows the clip to disappear inside the handle when using the knife. The clip can appear only when needed.

* the introduction of NFC technology into the knife box. With this system the user no longer has to look for the information on the product, but it is the knife itself that makes them available: indications for maintenance, in-depth information on the production process, or more general information about LionSteel.

As was already the case with the TRE model, the user has the possibility to remove the pinball machine, opting for a more traditional two-handed blade opening. Also on the ROK there is the Rotoblock safety system and a steel tip on the end of the blade locking bar: in this way it is possible to prevent breakage or wear caused by the blade itself.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin
Handle: Aluminum
Blade length: 86mm.
Blade thickness: 4.5mm.
Total length: 198mm.
Thickness when closed: -mm.
Weight: 130g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: concealed, made from solid
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings - possibility to remove the pinball system guard

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: M390 stainless steel
Lama treatment: Stonewashed
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 133mm.
Overall length: 222 mm.
Thick when closed: 12.1mm.
Weight: 125g.
Closure: BackLock
Clip: deep pocket type, stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Maserin logos
Notes: Skull Crasher optional, included in the package, to be mounted on the shank at the top of the clip - Design by Tommaso Rumici

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel AUS-10A
Blade treatment: Stonewashed
Manicure: Long Grive-Ex (EMS Grivory)
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 138mm.
Total length: 235mm.
Thick when closed: 16.5mm.
Weight: 133g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Note: -

Intended use: Hiking

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: FRN and overmoulded rubber
Blade length: 270mm.
Blade thickness: 3.6mm.
Total length: 430mm.
Balancing: Advanced
Weight: 425g.
Sheath: in black leather, with vertical belt port
Packaging: cardboard box with Fox FKMD logos
Note: -

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: M390 stainless steel
Lama treatment: Stonewashed
Handle: G10
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 133mm.
Overall length: 222 mm.
Thick when closed: 12.1mm.
Weight: 125g.
Closure: BackLock
Clip: deep pocket type, stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Maserin logos
Notes: Skull Crasher optional, included in the package, to be mounted on the shank at the top of the clip - Design by Tommaso Rumici

Intended use: Hiking

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: FRN and overmoulded rubber
Blade length: 270mm.
Blade thickness: 3.6mm.
Total length: 430mm.
Balancing: Advanced
Weight: 425g.
Sheath: in black leather, with vertical belt port
Packaging: cardboard box with Fox FKMD logos
Note: -

Intended use: Sports / EDC

Type of production: Industrial
Country of production: USA
Blade: CPM-S30V stainless steel with full flat sharpening
Blade treatment: Stonewashed
Grip: black G10 with stainless steel folders
Blade length: 62mm.
Blade thickness: 3.7mm.
Length closed: 88mm.
Total length: 150mm.
Thick when closed: 10.8mm.
Weight: 71g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Eric Glesser

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.

Purpose of use: Sportsman
Type of production: Semi-Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: stonewash
Manicure: Titanium 6AL-4V
Blade Length: 70mm.
Blade thickness: 3.5mm.
Closed length: 100mm
Total Length: 170mm.
Weight: 81g.
Closure: FrameLock
Clip: Titanium 6AL-4V
Packing: Cardboard box with Spartan Blades logos
Notes: GTC Alpha Ball Bearing Opening - Carson Flipper System Opening - Design by Keith Edick and Curtis Iovito

Intended use: Sportsman / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Steel Sleipner 60 / 61HRC
Blade treatment: Black PVD
Handle: Aluminum
Blade Length: 94mm.
Blade thickness: 4.5mm.
Overall length: 211mm.
Closed thickness: 9mm.
Weight: 146g.
Closure: Frame Lock with Steel Swing and Rotoblock Security System
Clip: Removable and reversible, stainless steel
Packing: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings

Intended use: Sportsman / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Steel Sleipner 60 / 61HRC
Blade treatment: Satin
Manicure: Aluminum
Blade Length: 94mm.
Blade thickness: 4.5mm.
Overall length: 211mm.
Closed thickness: 9mm.
Weight: 146g.
Closure: Frame Lock with Steel Swing and Rotoblock Security System
Clip: Removable and reversible, stainless steel
Packing: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel LC200N high corrosion resistance
Blade treatment: Stone Washed
Handle: Titanium
Blade length: 84mm.
Blade thickness: 3.0mm.
Closed Length: 113mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 108g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin Slysz

Intended use: Sports / EDC

Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 61mm.
Blade thickness: 3.5mm.
Closed Length: 90mm.
Overall length: 151mm.
Weight: 119g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper Voxnaes

Intended use: tactical / sport
Type of production: Industrial
Country of Origin: USA
Blade: full tang, steel 1095 black texture powder coated
Handle: micarta
Blade length: 95mm.
Blade thickness: 4.5mm.
Overall length: 270mm.
Balance: on guard branch
Weight: 147g.
Sheath: ABS, coupling with Tek-Lok type or clip system
Packaging: cardboard box with Ontatio Knife Company logos

type of production: Industrial

Country of production: United States
Blade: Stainless steel CPM-S45VN Steel Powder
Blade treatment: Satin
Handle: G10 Black
blade length: 87mm.
blade thickness: 3.5mm.
closed length: 122mm.
total length: 210mm.
thick when closed: -
Balancing: -
Weight: 110g.
Closed: Compression Lock
Clips: stainless steel
Package: cardboard box with logos Spyderco
Notes: -