Sport, Military and Collectible Knives | Coltelleria Collini

Intended Use: EDC / Rescue

Production type: Industrial
Country of manufacture: China
Blade: Steel 440 HRC 55-57
Blade treatment: satin finish
Handle: Aluminium T6-6082 anodised red
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 208mm.
Weight: 169g. (204g. including sheath)
Clip: -
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: glass breaker - 7, 8 and 10 mm bolt insert - oxygen cylinder opening insert - nylon sheath

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory



Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM 
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logos

ntended Use: Tactical / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Teflon coated
Handle: Aluminium
Blade length: 120mm.
Blade thickness: 3.5mm.
Total length: 250mm.
Weight: 202g.
Clip: Stainless steel, removable and reversible
Closure: liner lock
Packaging: cardboard box with Kalashnikov logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Not available (limited run sprint run in K390 steel).
* Sharpening: Re-sharpened
* Marks on blade: Small marks, especially near the tip, left side
* Marks on handle: Signs of wear on the titanium clip, a major scratch on the right side of the handle, above the frame
* Box: Present and original, in cardboard.
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Sporting/Collection

Type of Production: Industrial
Country of Production: Italy
Blade: In cold work tool steel Bohler K390 hardened to 64/65HRC
Blade finish: Microbead blasted and matted
Handle: Titanium
Blade length: 74mm.
Blade thickness: 3.5mm.
Total length: 175mm.
Weight: 74g.
Closure: Titanium Frame Lock with steel clapper
Clip: Titanium 6Al4V
Packaging: Cardboard box with LionSteel logos
Notes: Opening on IKBS ball bearings with carson flipper system - DIffers from the standard model in both the steel used, the upper blade profiling, the finish of the blade, the packaging, and the lack of possibility to customize the opening system by removing the flipper - previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

SERIAL NUMBER 0231

* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Limited series, discontinued
* Sharpening: Factory
* Marks on blade: Slight, uneven treatment in places (factory, not due to wear)
* Marks on handle: No
* Box: Present and original, WITH AUTOGRAPH SIGNATURE OF LYNN THOMPSON
* Scabbard: Not present
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratory

Intended use: Sporting/EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel Carpenter CTS XHP Alloy 59/60HRC
Blade treatment: DLC
Handle: Griv-Ex
Blade length: 135mm.
Blade thickness: 3.6mm.
Length closed: 170mm.
Total length: 304mm.
Weight: 208g.
Closure: Back Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition (serial no. 0231) with signature of "Lynn C. Thompson" laser engraved on the blade and in pen on the packaging

This new Finnish outdoor and hunting knife called Heimo 4" Bushcraft edition, full tang, is designed to take on all your wilderness adventures and challenges. Very popular for bushcraft, hunting, fishing and the outdoors open.Roselli has chosen to make this blade with carbon steel for a longer life of the edge.

This model has a full tang, therefore more balanced and robust than the standard version. In fact, Roselli full tang knives are resistant, durable and perfect for heavy use.

The knife has a beautiful curly stained birch handle coated with linseed oil to ensure a firm grip, even when wet. The handle also has brass clamps and strap holes.

It comes in a handmade sheath of dark vegetable tanned Finnish leather, with a metal spring to keep the knife firmly in place at all times. You can choose between two scabbard options; scabbard combined with Firesteel Roselli or a standard scabbard.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: -
Total length: 220mm.
Balancing: -
Weight: 200g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

Type of production: Artisanal
Blade production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Stone Edge
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 162mm.
Balance: backwards
Weight: 149g.
Sheath: Kydex, thermoformed, with Tek-Lok attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the product photographed.

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel CPM-S-35VN
Blade treatment: satin finish
Handle: steel liners and titanium grips
Blade length: 77mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 116g.
Clip: removable stainless steel
Closure: button lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley - manual opening system via carson flipper system on ball bearings

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Stonewashed
Handle: Green Canvas Micarta
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Weight: 100g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Carbon Fiber "Artic Storm"
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Weight: 105g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stonewashed stainless steel
Blade Length: 90mm.
Blade thickness: 3.3mm.
Length when closed: 121mm.
Total length: 211mm.
Weight: 167g.
Clip: stainless steel, removable
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Serge Panchenko

Intended use: hiking / bushcraft

Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Stone Edge
Handle: Micarta
Blade Length: 70mm.
Blade thickness: 3.5mm.
Total length: 162mm.
Balance: backward
Weight: 149g.
Sheath: made of Kydex, thermoformed
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcrafted

Intended use: hiking / bushcraft

Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Black Blood
Handle: Micarta
Blade Length: 70mm.
Blade thickness: 3.5mm.
Total length: 162mm.
Balance: backward
Weight: 149g.
Sheath: made of Kydex, thermoformed
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcrafted

Knife withdrawn from private collection - Overall in good condition, has some minor wear marks on the aluminum handle. On the other hand, the blade is in excellent condition and still has the factory sharpening - The knife is without packaging and certificates, but comes with the original Nylon sheath - Checked and certified by our in-house laboratory.




Innovative tactical/military knife, designed by Duane Dieter, produced in the late 1990s and immediately became an icon in the cutlery scene.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.




Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: aircraft grade aluminum with non-slip and skull-crasher inserts
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 200mm.
Weight: 122g.
Closure: Button Lock with additional safety system
Clip: removable and reversible, stainless steel
Sheath: made of Nylon with MOLLE attachments

Knife withdrawn from private collection - model now discontinued and no longer available - 83mm blade "small" version - overall in excellent condition, shows no signs of wear or use - factory sharpening in perfect condition - no packaging - checked and certified by our in-house laboratory.

Intended Use: Sporting / EDC

Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S30V
Blade finish: satin finish
Handle: G-10 with stainless steel liners
Blade length: 83mm.
Blade thickness: 3.5mm.
Length closed: 117mm.
Total length: 201mm.
Weight: 155g.
Closure: Back Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: discontinued knife - withdrawn from private collection, overall in very good condition

Knife withdrawn from private collection - 2011 model now discontinued and no longer available designed by Allen Elishewitz - Like new, with no special signs of wear and tear - Original factory sharpening in excellent condition - No original packaging - Checked and certified by our in-house laboratory.

Intended Use: Tactical

Production type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM at 58/60HRC
Blade Finish: Stonewashed
Handle: 3D machined G-10 G-Mascus
Blade length: 108mm.
Blade thickness: 3.5mm.
Length closed: 127mm.
Total length: 227mm.
Thickness when closed: 16mm
Weight: 150g
Closure: Button Lock with security system
Clip: Stonewashed Stainless Steel
Packaging: -
Notes: Design by Allen Elishewitz - knife withdrawn from private collection - like new

Knife collected from a private collection - Never used, never taken out of its box, like new - Rare model produced by Fantoni in 2009 in a limited edition of only 20 pieces based on a design by Tommaso Rumici, one of his most famous and successful knives, still very modern and with an incredibly attractive design - Supplied with box, warranty certificate, sheath and replacement Ebony grips - Checked and certified by our in-house laboratory.

Intended Use: Collection / Sporting

Country of manufacture: Italy
Type of production: industrial
Blade: stainless steel CPM-S30V 61-62HRC
Blade finish: satin-finished
Handle: made of micarta or ebony wood, interchangeable as desired (cheeks included in package)
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Balance: set back 1cm. from the lower guard branch
Weight: 68g.
Sheath: Made of kydex, with clip
Notes: Design by T. Rumici - Limited and numbered edition of only 20 pieces - Collected from private collection, like new.

Link to the HIDE project page directly on the website of Designer Tommaso Rumici

Knife withdrawn from private collection - Rare model produced by Master of Defense around late 90s/early 00s and designed by James "Patches" Watson - Excellent condition. Never resharpened - No original box - Checked and certified by our workshop.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM black
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed: 112mm
Total length: 200mm.
Thickness when closed: 13mm
Weight: 116g.
Closure: Liner Lock
Clip: removable, stainless steel
Notes: knife withdrawn from private collection in excellent condition

Tactical / EDC knife produced in the late 1990s withdrawn from private collection - overall in excellent condition - with factory sharpening in good condition- no packaging or manuals - checked and guaranteed by our in-house laboratory.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: aircraft aluminum with non-slip Kraton inserts
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 197mm.
Thickness when closed: 13mm
Weight: 108g.
Closure: Button Lock
Clip: removable, stainless steel
Packaging: knife withdrawn from private collection, overall in very good condition

The original purpose of the Silent Hero knife was to provide a medium-sized tool for use by an interdiction unit specializing in fighting rhino poachers in Africa. It is an excellent design that has served many people on different continents. Over time, Anton (the designer) realized that he did not always need such a large knife strapped to his hip.

This is where the Silent Hero 4 was born. The handle and blade shape of the full-sized knife were perfect for a variety of tasks. By reducing them, you get a knife that is much easier to carry as an EDC, but still long enough to handle most cutting tasks. The appearance of this smaller version is basically the same, but there are some differences. The blade is a bit thinner, the finish is Sniper Gray Cerakote (instead of Black River Wash) and it comes with a Kydex sheath instead of leather. So if you are looking for a blade to match your Silent Hero or simply prefer a blade length of about 4" instead of 6", the new Silent Hero 4 will be an excellent addition to your collection!

Intended Use: Utility

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Cerakote Sniper Gray
Handle: Canvas Micarta
Blade length: 108mm.
Blade thickness: 3.4mm.
Total length: 225mm.
Balance: on the guard branch
Weight: 170g.
Sheath: kydex
Packaging: transparent plastic bag
Notes: Emergency whistle - Design by Anton Du Plessis

The Baja 3.0 knife is a synthesis of simple design and excellent execution. The 3.0-inch blade can adequately handle a wide variety of tasks, such as building wooden tools, building a fire and shelter, or felling an animal. The 1/8-inch thick 1095 high-carbon steel provides excellent cutting, penetration and edge-holding qualities. The simple handle design, with its Micarta grooves, provides the user with excellent traction in most circumstances.

Intended Use: Utility

Production Type: Semi-Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Coyote Tan Coatung
Handle: Canvas Micarta
Blade Length: 76mm.
Blade thickness: 3.5mm.
Total length: 158mm.
Weight: 85g.
Sheath: leather, belt
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by certificate of guarantee and authenticity

The C.U.B. (Compact Utility Blade) is designed to serve as a compact and lightweight sidekick to a machete/bolo/parang in a tropical environment or of a tomahawk/axe in a forest environment. It is capable of performing all the important utility functions for camp and food preparation, leaving the heavy lifting to the other cutting tools. With an emphasis on compactness, the C.U.B. was designed with two styles of knives in mind: the Finish Puukko (with scandi sharpening) and the Kephart. Put them in a blender and you get the C.U.B. TOPS: robust simplicity!

Intended Use: Utility

Type of Production: Semi-Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Stonewashed
Handle: Canvas Micarta
Blade Length: 95mm.
Blade thickness: 3.5mm.
Total length: 203mm.
Weight: 148g.
Scabbard: Nylon, belt-mounted, M.O.L.L.E. compatible.
Packaging: transparent plastic bag
Notes: Emergency whistle - Small Survival Kit with tinder box, compass, rubber bands etc. - Each piece is numbered and accompanied by certificate of guarantee and authenticity

Intended use: Collection / Survival

Type of production: semi industrial
Production Lama: USA
Blade: 1095 58HRC carbon steel
Blade treatment: BTC - Camo Traction Coating
Handle: micarta with red spacers
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 168mm.
Thick when closed: -
Balancing: on the guard branch
Weight: 92g.
Closure: -
Clip: -
Sheath: in kydex, tactical with multi-position clip
Packaging: -
Notes: Design by Tom Brown, extra small version of the knife used in the film The Hunted with Benicio Del Toro, each piece is numbered and accompanied by a certificate of guarantee and authenticity.

We always prioritize reliability and ease of use.

Its light weight and deep carry clip means you'll always have the Z200 by your side. If you prefer a controlled two-handed opening the Z200 is made for you. We milled a groove into the Sleipner steel blade that allows for easy and discreet opening.

Intended Use: EDC / Sporty

Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 102g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush mounted, stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: At the base of the blade groove there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.

We always prioritize reliability and ease of use.

Its light weight and deep carry clip means you'll always have the Z200 by your side. If you prefer a controlled two-handed opening the Z200 is made for you. We milled a groove into the Sleipner steel blade that allows for easy and discreet opening.

Intended Use: EDC / Sporty

Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: Aluminum 6061-T6
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 102g.
Closing System: FrameLock
Clip: deep pocket, removable and reversible, flush stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: At the base of the groove of the blade there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.

Timeless simplicity is the main reason why you will never get tired of your Z100.

In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: Aluminum 6061-T6
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: FrameLock
Clip: deep pocket, removable and reversible, flush stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife

Timeless simplicity is the main reason why you will never get tired of your Z100.

In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Black DLC
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush stainless steel with Black DLC treatment
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife

Confident elegance complemented by aristocratic lines gives the Z400 its well-deserved dominance over the rest of our folding knives.

A dagger-style, single-edged spear point blade made from Sleipner steel and equipped with a double guard that allows for an aggressive opening at the edge of the pocket when drawing or the ability to use it as a flipper system. Rounding out the package is an extremely durable, lightweight handle made of G10 composite with a secure liner lock and a deep pocket clip. All of this is designed in combination with a sense of elegance and simplicity. This is the Z400.

Intended use: EDC / Sporting

Production Type: Industrial
Country of Production: Czech Republic
Blade: Sleipner 58HRC steel
Blade Finish: Black DLC
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total length: 230mm.
Weight: 110g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush, in Black DLC stainless steel
Package: Cardboard box with ANV logos
Notes: -

Confident elegance complemented by aristocratic lines gives the Z400 its well-deserved dominance over the rest of our folding knives.

A dagger-style, single-edged spear point blade made from Sleipner steel and equipped with a double guard that allows for an aggressive opening at the edge of the pocket when drawing or the ability to use it as a flipper system. Rounding things out is an extremely durable, lightweight handle made of G10 composite with a secure liner lock and a deep pocket clip. All of this is designed in combination with a sense of elegance and simplicity. This is the Z400.

Intended use: EDC / Sporting

Production Type: Industrial
Country of Production: Czech Republic
Blade: Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total length: 230mm.
Weight: 110g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush mounted
Package: Cardboard box with ANV logos
Notes: -

How far can you go on the path of minimalism?

The elegance of a single piece of Sleipner steel, precision machined and ground to produce a reliable tool. The P100 was conceived as a staple of any personal EDC set where everything unnecessary has been removed. With its low weight and ultra-thin profile scabbard, the P100 can be exactly what you need at all times. Anytime, anywhere.

Intended use: hiking / light utility / neck knife

Production type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner 58HRC steel
Blade finish: Stonewashed
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 62g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos.
Notes: Possibility to use it as neck knife.

How far can you go on the path of minimalism?

The elegance of a single piece of Sleipner steel, precision machined and ground to produce a reliable tool. The P100 was conceived as a staple of any personal EDC set where everything unnecessary has been removed. With its low weight and ultra-thin profile scabbard, the P100 can be exactly what you need at all times. Anytime, anywhere.

Intended use: hiking / light utility / neck knife

Production type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner 58HRC steel
Blade finish: Stonewashed
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 62g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos.
Notes: Possibility to use it as neck knife.

Intended Use: Utility / Bushcrat / Hunting

Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel full tang
Blade treatment: Satin finish
Handle: Micarta Mossy Oak
Blade length: 86mm.
Blade thickness: 3.5mm.
Total length: 210mm. 
Balance: on the guard branch
Weight: 148g.
Scabbard: Belt, leather, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -

Rare knife produced by Chris Reeve in 2007 and no longer in production since 2013. Knife from a private collection in like new condition, with original sheath, without original box and certificate. Checked and certified by our internal laboratory.

Intended use: sports / hunting

Blade: CPM-S30V 58 / 59HRC stainless steel
Blade treatment: stonewash finish
Handle: Cocobolo wood
Blade length: 88mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 201mm.
Balancing: set back
Weight: 76g.
Closure: -
Clip: -
Sheath: in leather
Notes: inyoni in Zulu means bird

Boker Tiger-Damascus adds a very special model to the series of pocket knives steeped in history. Collector's knife with a historical past, a true piece of living history, which combines high quality craftsmanship with authentic materials. Known worldwide as the Tiger, the Panzerkampfwagen VI was used by the Wehrmacht from the late summer of 1942. It is considered to be one of the most famous tanks in history, despite its modest production number of only 1350 units and consequent low importance. strategic. The development of the heavy tank can be traced back to 1937 and series production began in August 1942. Today there are only seven units preserved, on display worldwide.

The tank parts used for the knife blade come from a Tiger I of the Schwere Panzerabteilung 502, which was destroyed in combat in Latvia in the summer of 1944 in a wooded area near the town of Bauska. Based on the wreck found at the original excavation site, it was determined that this Tiger was one of the first models produced.

The straight-cut Boker Tiger-Damascus features a unique Damascus blade made from the steel from the tank destroyed in Bauska. The non-stainless damask mosaic is hand-forged by Chad Nichols and resembles the tank tracks left in the ground by the Tiger's heavy tracks. Unlike conventional damask, damask mosaic production does not create layers, but complex damask bars are hand forged into a mosaic with an elaborate and very complicated process. The blade operates on ball bearings and is locked open by a sturdy steel framelock with stonewash finish.

The overall shape of the knife pays homage to the famous lines of the tank, while the decorative pin screw is modeled on the main drive pinion.

The slightly shaped micarta canvas handle scales feature precisely milled grooves, reminiscent of the characteristic surface texture of the Zimmerit coating of German armored vehicles.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: Damascus steel from pieces of the Tiger
Handle: in steel and micarta
Blade length: 85mm.
Blade thickness: 3.6mm.
Total length: 198mm.
Weight: 141g.
Clip: in stainless steel
Closure: Frame Lock
Packaging: PVC display case that lets the knife "float" inside, making it visible from all sides
Notes: Certificate of Guarantee - Gray cotton case

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Total length: 176mm.
Weight: 78g.
Clip: removable steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearings

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads - PLEASE NOTE THAT THE WEAVE OF THE MICARTA MAY VARY FROM THAT SHOWN IN THE PHOTOS
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steel

Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2005 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.

Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

The only copy at our disposal, without box, rare and out of production for many years.

Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel - DLC
Handle: polymer with aeronautical aluminum inserts with Kraton anti-slip
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length: 130mm
Total length: 223mm.
Thick when closed: 20mm
Weight: 170g.
Closure: Button Lock
Clip: removable, in stainless steel
Packaging:

Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2001 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.

Tactical / EDC knife manufactured in the late 1990s and designed by martial arts expert Michael Janich,

Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

The only copy at our disposal, without box, very rare and out of production for many years.

Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel
Handle: Aviation aluminum with Kraton anti-slip inserts
Blade length: 86mm.
Blade thickness: 3.5mm.
Closed length: 112mm
Total length: 200mm.
Thick when closed: 13mm
Weight: 120g.
Closure: Liner Lock
Clip: removable, in stainless steel
Packaging:

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 61HRC
Blade treatment: satin finish
Sleeve: Titanium and carbon fiber
Blade length: 88mm.
Blade thickness: 3.7mm.
Total length: 208mm.
Weight: 133g.
Clip: titanium, billet machined
Locking system: frame lock
Package: Cardboard box with Boker Plus logos, nylon pouch with zipper.
Notes: Design by Todd Rexford - Limited and numbered edition on box and blade.

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: Stainless steel and G10
Blade length: 78mm.
Blade thickness: 3.2mm.
Total length: 184mm.
Weight: 81g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley - ball bearing flipper opening system

The stunning Boker M4 Sherman-Damascus is a living piece of history and combines high quality craftsmanship with historical materials. The American M4 Sherman was designed in 1940 and is considered to be one of the most famous tanks in history. It was produced between 1942 and 1945, remained in service until 1957 and was used on all battlefields of World War II - not only by the United States and Canada, but also by Britain, by French forces. , from China and even the Soviet Union.

The Boker Sherman-Damascus features a unique 80-ply Damascus blade, forged with materials sourced from the production of the M4 Sherman tanks, previously restored by the museum. The unique damask is hand-forged for Boker by Chad Nichols and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman. The ball bearing blade fits into a solid steel frame block.

The overall shape of the knife is a tribute to the aesthetic lines of the tank, while the decorative screw of the blade axis is modeled on the characteristic main transmission pinion. The slightly contoured canvas micarta handle fits comfortably in the hand and the color is reminiscent of the camouflage paint used by both the United States Army and Marine Corps.

Sold with transparent display and with certificates of authenticity and individual serial number.

A portion of the proceeds from each knife sold goes to the Americans at the Wartime Museum to support educational programs and the care and preservation of these proud examples of American history. The Americans in the Wartime Museum is a nonprofit cultural and educational institution dedicated to honoring those who have served in all branches of the U.S. military and on the home front from World War I to the present.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: 80-layer stainless steel damascus, from parts of the M4 Sherman
Handle: in steel and micarta
Blade length: 77mm.
Blade thickness: 3.5mm.
Total length: 175mm.
Weight: 107g.
Clip: in stainless steel
Closure: Frame Lock
Packaging: PVC display case that lets the knife "float" inside, making it visible from all sides
Notes: Warranty Certificate - Gray cotton case - Numbered copy on the handle

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S-35VN stainless steel
Blade treatment: stonewash
Handle: steel liners and titanium grips
Blade length: 54mm.
Blade thickness: 3.2mm.
Total length: 138mm.
Weight: 91g.
Clip: in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley - IKBS opening system on ball bearings

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel M390
Blade treatment: satin finish
Sleeve: Titanium and carbon fiber and copper
Blade length: 76mm.
Blade thickness: 3.2mm.
Total length: 183mm.
Weight: 94g.
Clip: titanium
Closure: frame lock
Package: cardboard box with Boker Plus logos, nylon case with zipper
Notes: Design by Lucas Burnley - ball bearing flipper opening system

Rare model produced by Gerber until 2003 - Knife taken from private collection - Overall in excellent condition, complete with original box and certificates - Checked, certified by our internal laboratory Coltelleria Collini.

Intended use: Tactical/Military

Blade: Stainless steel 154CM
Blade production USA
Handle: G10 with titanium folders
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 200mm.
Balance: -
Weight: 105g.
Closure: Liner Lock
Clip: Steel
Scabbard: -
Notes: -

Intended use: Tactical

Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel at 58 / 60HRC
Blade treatment: Stonewashed
Handle: G-10 3D machined with G-Mascus designs
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed length: 114mm.
Total length: 201mm.
Thick when closed: 11mm
Balancing: -
Weight: 124g
Closure: Button Lock with safety system
Clip: in Stonewashed Stainless Steel
Sheath: -
Packaging: Cardboard box with Hogue logos
Notes: Design by Allen Elishewitz

Intended Use: Utility / Hiking / Tactical

Production Type: Industrial
Country of Production: USA
Blade: Tool steel CPM-CRUWEAR 63/65HRC
Blade Treatment: Tungsten Flat Earth
Handle: G10 with PVD stainless steel folders
Blade length: 97mm.
Blade thickness: 3.6mm.
Length closed: 132mm.
Total length: 227mm.
Handle thickness: 16mm.
Weight: 182g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: High carbon steel blade, not stainless; wash and dry carefully after use and grease in case of storage

Intended use: Collection / Sporting

Production type: industrial
Country of production: Italy
Blade: steel D2 58/61HRC
Blade finishing: satin finish
Handle: titanium, with anodized titanium spacers and screws
Blade length: 105mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thickness when closed: 9mm.
Weight: 130g.
Closure: Frame Lock with removable stainless steel clapper.
Clip: Anodized titanium, billet machined
Notes: Opening by Carson flipper system - Opening movement on ball bearings - Design by Sergio Consoli

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: DLC coating
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Length closed: 136mm.
Total lenght: 238mm.
Thickness when closed: 13mm.
Weight: 147g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Package: cardboard box with Cold Steel logos
Notes: -

Intended Use: Hunting / Fishing / Sporting

Production type: Industrial
Country of Production: Lithuania
Blade: Full tang stainless steel M390 60/61HRC
Blade Finish: Satin
Handle: Black Canvas Micarta
Blade length: 120mm.
Blade thickness: 3.4mm.
Total length: 242mm.
Balance: on guard branch
Weight: 140g.
Scabbard: leather
Package: cardboard box with TRC knives logos, certificate of production, TRC sticker,
Notes: -

Why waste time going around a bush when you can cut it down? Prepare for your excursions with complete peace of mind having the Leuku 202 at your side!
This no-frills fixed blade is built for strenuous bushcradt sessions while maximizing grip comfort.

Intended use: Utility / Hiking

Type of production: Industrial
Country of production: USA
Blade: CPM-3V 60-62 HRC steel
Blade finish: Satin finish
Handle: Santoprene Ranger Green
Blade length: 132mm.
Blade thickness: 3.5mm.
Total length: 246mm.
Weight: 128g.
Sheath: in leather
Packaging: Cardboard box with Benchmade logos
Note: -

Collector's knife from private collection - Handcrafted in 2001 by Allen Elishewitz - Overall in good condition, original sharpening, some small signs of wear on the titanium handle and on the back of the blade - Without certificates and packaging - Checked and certified by our Collini Cutlery internal laboratory.

Intended use: Collection

Type of production: custom
Country of production: USA
Blade: handcrafted and bevelled, in CPM-154CM stainless steel
Blade treatment: hand satin finish
Handle: full scales in titanium with blue anodizing
Blade length: 82mm.
Blade thickness: 3.5mm.
Length closed: 130mm.
Total length: 184mm.
Thick when closed: 11mm.
Weight: 96g.
Closing: framelock
Clip: removable, stainless steel
Notes: Made entirely by hand by Allen Elishewitz

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 203 mm.
Blade thickness: 4.2 mm.
Total length: 324 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 135mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 255mm.
Thick when closed: -
Balancing: 2 cm backward
Weight: 213g.
Closing: -
Clip: -
Sheath: leather
Packaging: Wooden box with WRKT logos
Note: -

Designed to handle all your adventures in the outdoors, the Puukko combines a classic Scandinavian silhouette with the modern performance you expect from a Benchmade. CPM-3V steel rewrote our standard for toughness, outperforming all other steels in our lineup. The rubberized Santoprene handle make for a comfortable and secure grip for a multitude of tasks. Even the sheath was created with versatility in mind, making it easy to carry with you. Whether it becomes your go to camp knife or your bushcrafting lifeline, the Puukko is made to handle any situation.

Intended use: Utility / Hiking

Type of production: Industrial
Blade production: USA
Blade: CPM-3V 60-62 HRC steel
Blade treatment: Satin
Handle: Santoprene
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 212mm.
Weight: 114g.
Sheath: leather
Packaging: Cardboard box with Benchmade logos
Note: -
Send feedback
History
Saved

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 225mm.
Thick when closed: -
Balancing: 2 cm backward
Weight: 172g.
Closing: -
Clip: -
Sheath: in kydex
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket
Send feedback
History
Saved

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 125mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 250mm.
Thick when closed: -
Balancing: 1.5 cm backward
Weight: 232g.
Closing: -
Clip: -
Sheath: in kydex
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: billet aluminum
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 18mm.
Weight: 62g.
Closure: SlipJoint with steel leaf
Clip: retractable, made from solid
Packaging: cardboard box with LionSteel logos
Note: -

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: billet aluminum
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 18mm.
Weight: 62g.
Closure: SlipJoint with steel leaf
Clip: retractable, made from solid
Packaging: cardboard box with LionSteel logos
Note: -

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
Community

Citadel - Nordic

These handmade knives are distinguished by their original but functional line, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The knife is then polished and sharpened by hand on stone and finished in every single detail.

Blade: DNH7 "Bruit de forge" selective hardening 40/60 HRC steel with file-worked spine
handle: In wood with brass guard
Blade length: 70 mm.
Handle length: 115 mm.
Blade thickness: 3.5 mm.
Total length: 195 mm.
Sheath: Handmade brown leather
Weight: 154 g.

Intended use: Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV steel (59-61 HRC)
Surface treatment: Smoke Gray PVD
Handle: Contoured Python Micarta
Blade length: 8.6mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 193mm.
Thick when closed: 15mm.
Weight: 127g.
Closure: Axis Lock
Clip: Removable and reversible, in stainless steel
Sheath: -
Packaging: Cardboard box with Benchmade logos
Notes: limited edition of 500 pieces

Intended use: EDC / Light Utility / Neck Knife

Type of production: Industrial
Country of production: Italy (Lion Steel - Maniago)
Blade: Niolox stainless steel
Surface treatment: Blackwash
Handle: Niolox stainless steel
Blade length: 60mm.
Blade thickness: 3.5mm.
Total length: 134mm.
Balancing: set back
Weight: 68g.
Sheath: Kydex thermoformed with neck strap
Packaging: cardboard box with Pohl Force logos, Nylon Pouch with zip, PVC Patch, warranty certificate with knife serial number.
Notes: Design by Kaila Cumings - Limited and numbered edition in only 300 copies - Each knife is serialized and numbered on blade, box and certificate.

Intended use: Hunting / Fishing / Sports

Type of production: Industrial
Country of production: Lithuania
Blade: full tang stainless steel M390 60 / 61HRC
Blade finish: Satin
Handle: Black Canvas Micarta
Blade length: 118mm.
Blade thickness: 3.4mm.
Total length: 240mm.
Balancing: on the guard branch
Weight: 145g.
Sheath: in leather
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manual

Intended use: Collection / Sports

Type of production: Industrial
Country of production: Lithuania
Blade: full tang in RWL34 62HRC stainless steel
Blade finish: Apocalyptic Finish
Handle: Black Canvas Micarta
Blade length: 99mm.
Blade thickness: 3.5mm.
Total length: 214mm.
Balancing: advanced
Weight: 152g.
Sheath: in leather
Packaging: box with TRC knives logos, signed certificate, TRC sticker, disposable maintenance oil
Notes: limited edition of 150 copies - each individual copy is numbered - The serial number is stamped on a knife, box and certificate

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: in D2 steel
Blade treatment: stonewash
Handle: G10
Blade length: 94mm.
Blade thickness: 3.5mm.
Total length: 225mm.
Weight: 132g.
Clip: stainless steel, deep pocket type, removable and reversible
Closure: SubFrame Lock in stainless steel
Packaging: cardboard box with Boker Plus logos
Notes: Design by Boris Manasherov - Carson Flipper opening system with movement on ball bearings

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 59HRC
Blade finish: Satin finish
Handle: G10 with stainless steel internal folders and G10 spacer
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 103mm.
Total length: 178mm.
Thick when closed: 14.2mm.
Weight: 95g.
Closure: Liner Lock
Clip: stainless steel, machined from solid
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Sports / Tactical

Type of production: Industrial
Lama production: Taiwan
Blade: Stainless steel AUS-6 55-57 Rc
Blade treatment: sandblasted
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed length: 135mm.
Total length: 215mm.
Thick when closed: 2.5 set back
Balancing: -
Weight: 178g.
Sheath: two nylon sheaths (for right and left) and multi fixing kit
Packaging: cardboard box with CRKT logos

Intended use: collection / gentleman / sportsman

Type of production: Artisan
Lama Production: Visalia, California, USA
Blade: Stainless steel M390 - Stonewashed
Handle: Acid Rain Frosty titanium with green anodizations, screws, spacer and green anodized clips
Blade length: 65mm.
Blade thickness: 3.5mm.
Closed length: 88mm.
Total length: 152mm.
Thick when closed: 10.5mm.
Weight: 76g.
Opening: front flipper system on movement with ball bearings
Closure: FrameLock
Clip: titanium acid rain frosty green anodized
Packaging: hard-copy textile case with zip closure and Olamic Cutlery logos - certificate of guarantee and authenticity with serial number
Notes: each Olamic knife is unique and made entirely by hand in different combinations of materials, finishes, colors and details - each knife is numbered

The Wayfarer 247 was initially released in May 2016 and since then Olamic has continuously refined the design and the model, enriching it with features, options and customizations to choose from to create millions of possible combinations on the model. In May 2018 the range is extended by offering 4 different blade shapes to choose from: drop point, harpoon, sheepscliffe and much more.

Intended use: collection / sports

Type of production: Artisan
Lama Production: Visalia, California, USA
Blade: M390 stainless steel - Acidwash
Handle: carved titanium with gunkote boneyard finish, screws and gunkote boneyard spacer
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 207mm.
Thick when closed: 12.5mm.
Weight: 136g.
Opening: carson flipper system on movement with ball bearings
Closure: FrameLock
Clip: titanium boneyard gunkote
Packaging: hard-copy textile case with zip closure and Olamic Cutlery logos - certificate of guarantee and authenticity with serial number
Notes: each Olamic knife is unique and made entirely by hand in different combinations of materials, finishes, colors and details - each knife is numbered

The Wayfarer 247 was initially released in May 2016 and since then Olamic has continuously refined the design and the model, enriching it with features, options and customizations to choose from to create millions of possible combinations on the model. In May 2018 the range is extended by offering 4 different blade shapes to choose from: drop point, harpoon, sheepscliffe and much more.

Intended use: collection / sports

Type of production: Artisan
Lama Production: Visalia, California, USA
Blade: M390 stainless steel - Acidwash
Handle: kinetic rainforest titanium with purple anodizing, screws and kinetic rainforest spacer
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 207mm.
Thick when closed: 12.5mm.
Weight: 136g.
Opening: carson flipper system on movement with ball bearings
Closure: FrameLock
Clip: titanium kinetic rainforest
Packaging: hard-copy textile case with zip closure and Olamic Cutlery logos - certificate of guarantee and authenticity with serial number
Notes: each Olamic knife is unique and made entirely by hand in different combinations of materials, finishes, colors and details - each knife is numbered

The Wayfarer 247 was initially released in May 2016 and since then Olamic has continuously refined the design and the model, enriching it with features, options and customizations to choose from to create millions of possible combinations on the model. In May 2018 the range is extended by offering 4 different blade shapes to choose from: drop point, harpoon, sheepscliffe and much more.

Intended use: collection / sports

Type of production: Artisan
Lama Production: Visalia, California, USA
Blade: M390 stainless steel - Acidwash
Handle: dark blast titanium with blue entropic interior design, blue anodized screws, blue entropic spacer
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 207mm.
Thick when closed: 12.5mm.
Weight: 136g.
Opening: carson flipper system on movement with ball bearings
Closure: FrameLock
Clip: titanium
Packaging: hard-copy textile case with zip closure and Olamic Cutlery logos - certificate of guarantee and authenticity with serial number
Notes: each Olamic knife is unique and made entirely by hand in different combinations of materials, finishes, colors and details - each knife is numbered

The Wayfarer 247 was initially released in May 2016 and since then Olamic has continuously refined the design and the model, enriching it with features, options and customizations to choose from to create millions of possible combinations on the model. In May 2018 the range is extended by offering 4 different blade shapes to choose from: drop point, harpoon, sheepscliffe and much more.

Intended use: collection / sports

Type of production: Artisan
Lama Production: Visalia, California, USA
Blade: Stainless steel M390 - 2 tone stonewashed
Handle: dark blast titanium with purple anodized
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 207mm.
Thick when closed: 12.5mm.
Weight: 136g.
Opening: carson flipper system on movement with ball bearings
Closure: FrameLock
Clip: titanium
Packaging: hard-copy textile case with zip closure and Olamic Cutlery logos - certificate of guarantee and authenticity with serial number
Notes: each Olamic knife is unique and made entirely by hand in different combinations of materials, finishes, colors and details - each knife is numbered