Knives, collection knife, tactical knives, outdoor knives

Intended use: Utility / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58 / 60HRC stainless steel with stonewash finish
Handle: Black Canvas Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: advanced to 1cm
Weight: 190g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -

Knife withdrawn from a private collection - Condition like new - Re-sharpened by our sharpening laboratory - Original box - Knife checked and certified by our internal laboratory

Intended use: Sports

Type of production: industrial
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Production Lama: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Notes: Flat Ground sharpening

3 Mini Firestarters and 6 lures "made in USA" by Tortoise Gear for Victorinox 

THE SET:
Compact and essential set for lighting fires outdoors, plug into the corkscrew of your victorinox. 3 different waterproof and luminescent helical lighters (they store sunlight and release it in the dark) with 6 different firelighters lures.

Thickness: 8mm
Length: 27mm
Weight: 5g

USES:
Designed for the outdoorsm allow you to light an emergency drone in any outdoor conditions of humidity and altitude. Each tinder can light approximately 100 fires; each decoy can be used 1.5/2 times per fire.

COMPATIBILITY:
Compatible with any 84mm, 85mm, 91mm and 111mm Victorinox utility knife equipped with the corkscrew accessory

The Boker Plus Cataclyst Flipjoint features a flipper opening blade, it does not lock when open, but is simply held securely in place by a retaining ball. With appropriate pressure on the back of the blade, the blade can be folded back without releasing a locking device.

The sleek design features a textured black G10 grip that is three-dimensionally milled and has a weight-saving recess inside. Supplied with a deep pocket clip and a drawstring hole.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: satin finish
Handle: steel and G10
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 173mm.
Weight: 77g.
Clip: monolithic, removable
Closure: slipjoint
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearings

Yankee & Sekira - a hatchet and an axe.

The key difference between the two? The former can be used with one hand while the latter is built to be used with two hands ensuring maximum power.

Axes and hatchets are excellent and easily transportable tools, thanks to their small size, that can be used in many ways: cutting small trees, dissecting wood and carving and, in extreme cases, as personal defense.
The two new Fox models have blades forged in C45 steel, the handle in American walnut and are accompanied by leather sheaths made in Italy.

Intended Use: Hiking / Sporting

Production type: Industrial
Country of production: Italy
Blade: Carbon steel 1045 / C45
Blade treatment: Blackwashed
Handle: Hickory Wood (American Walnut)
Blade length: 8cm.
Blade thickness: 2.75cm.
Total length: 38cm.
Weight: 900g.
Sheath: leather, with belt loop, made in Italy.
Package: cardboard box with Fox Knives logos.
Notes: -

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel VG10
Blade treatment: black coating
Handle: steel liners and G10 grips
Blade length: 90mm.
Blade thickness: 2.5mm.
Total lenght: 213mm.
Weight: 82g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon case with zipper 
Notes: Design by Lucas Burnley - ball bearing flipper opening system

Intended use: Hunting / Sports

Type of production: Artisan
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closure: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

LE CAC® officially chosen by the French Army

This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle

The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.

The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.

TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.

The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.

Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.

The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.

Intended use: collection

Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design

Knife acquired from a private collection - Overall in very good condition, with factory sharpening - Rare version, one of the first, with flat G10 handle - Hardened by Paul Bos, with logo present on the right heel of the blade - It has some small signs of abrasion on the tigerstripe finish, common to all Strider knives - Checked and certified by our internal laboratory.

Intended Use: Tactical

Manufacturing Type: Mid Tech (semi-craft)
Country of Production: USA
Blade: Stainless steel CPM-S30V hardened by Paul Bos
Blade Treatment: Tiger Stripe
Handle: G10 flat with 2mm titanium liners
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thickness closed: 18mm.
Weight: 228g.
Closure: Liner Lock
Clip: Titanium 
Package: Nylon pouch with zipper 
Notes: Rare version, one of the first, with G10 flat grip - Hardened by Paul Bos, with logo on the right heel of the blade

The Kasumi 80001 combination whetstone with rough (240) and medium (1000) grit.

If your knife edge is in poor condition, start sharpening with the rough # 240 grit of the whetstone.

If your knife is in average condition, start with the # 1000 medium grit of the whetstone.

These two grits will keep your knives sharp enough for normal home use.

The whetstone comes with a hard rubber base for use when sharpening.

There is also a small abrasive stone to be used to grind the surface of the stone.

Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.

Quality level: very high

On the occasion of the theatrical release of the highly anticipated film Diabolik, directed by the Manetti Bros with Luca Marinelli, Miriam Leone and Valerio Mastandrea, we present the new version of Diabolik's knife, one of the most loved figures by fans of noir comics. Created in collaboration with the Astorina publishing house, we offer the new official "replica" version of the famous Throwing Knife of the King of Terror.

The new “999 \ LG Diabolik” throwing knife in special edition, replica features and style of the knife drawn in the original comic strips. Unlike the model made for the previous 50th, we have made some important changes. Like the logo of the anti-hero, Diabolik, in 24k gold on the knife blade and the elegant walnut handle.

Type of production: Industrial
Production Lama: Italy
Blade: N690 satin-finished stainless steel with 24K gold Diabolik engraving
Blade treatment: -
Handle: walnut wood
Blade length: 160mm.
Blade thickness: 5mm.
Closed length: -mm.
Total length: 290mm.
Thick when closed: -mm.
Balancing: -
Weight: 265g.
Closure: -
Clip: -
Sheath: nylon, made in Italy, by Radar
Packaging: cardboard box with Maserin and Diabolik logos
Notes: Officially licensed collectible / exhibition product

This model originates from Col. Rex Applegate's project the "Boker Smatchet", developed as a large combat knife, also perfect as a multifunctional tool for outdoors.

Starting from that project, Chuck Gedraitis' new Boker Plus Pocket Smatchet combines the design of the famous classic with the advantages of a practical pocket knife.

The sturdy Pocket Smatchet features a VG-10 Spearpoint blade, featuring a durable stonewash finish. The removable thumb pin on the back of the blade allows for ambidextrous opening, while the linerlock reliably locks it in place. The sturdy clip is milled from solid and also features the characteristic indentations of the classic Smatchet. With lanyard hole and high quality nylon case for storage.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Taiwan
Blade: VG-10 stainless steel
Blade treatment: stonewash
Handle: in micarta
Blade length: 95mm.
Blade thickness: 3.9mm.
Weight: 207gr.
Total length: 235mm.
Clip: in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Note: design by Chuck Gedrait

The modern Boker Plus Aphex Mini is the scaled-down version of the Boker Plus Collection 2020 designed by Lucas Burnley. The finely sharpened blade is made from VG-10 and comes with an impressive finish. Thanks to the ball bearings and pinball machine, the knife is particularly easy to open. The ergonomically shaped handle is three-dimensionally milled from titanium and decorated with a modern carbon fiber inlay.

Intended use: Collection

Type of production: Industrial
Country of production: Taiwan
Blade: in VG10 steel
Blade treatment: Satin
Handle: titanium with carbon fiber insert
Blade length: 78mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 96mm.
Weight: 78g.
Clip: titanium
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Notes: Design by Burnley

Perfect oil for the care of your knives knives. It can be used precisely, by correctly dosing the amount of oil to be used thanks to the extra long and fine tip. It is absolutely odorless and silicone free. Physiologically harmless according to DAB and LFGB and even approved for food (USDA and FDA).

Capacity: 12ml

Dimensions: 155mm x 18mm

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: in titanium with ivory G10 grips
Blade length: 71mm.
Blade thickness: 3mm.
Closed length: 112mm.
Total length: 184mm.
Thick when closed: 14mm.
Weight: 75g.
Closure: Slipjoint
Clip: titanium
Sheath: in leather
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Sacha Thiel

The great interest in Tirpitz-Damast damask over the years has convinced Boker to design another model supplied with the historic damask steel. The Boker Barlow Prime Tirpitz Damascus, much more compact than the original model, convinces not only in the collector's showcase, but also as a gentleman's knife. The blade made in the exclusive Tirpitz Damascus, is supplied with a modern elongated ricasso and opens with a nail notch. Damascus made with the material acquired from Tirpitz, sister ship of the legendary Bismarck which was the largest warship ever launched for the German Navy.

Soon after the end of World War II, a Norwegian specialist company began cannibalizing the ship, which sank off the Norwegian coast, in order to make the high-alloy steel available for civilian purposes. Norwegian divers recovered parts of Tirpitz's special armor from the fjord for Boker. From these pieces of living history, Damascus blacksmith Boker exclusively forges an extraordinary damask with a fascinating history. The combination of Tirpitz steel with carbon tool steels also results in an extremely strong Damascus which, with a Rockwell hardness of 61 to 63 HRC, is up to any task in everyday use.

The operational safety of the history-rich slipjoint pocket knife is further enhanced by a 90 degree locking mechanism when opening and closing. The characteristic teardrop shape of the Barlow is attributable to the English pocket knives of the seventeenth century, which certainly makes it one of the oldest models ever. The name of the classic probably dates back to an enterprising knife manufacturer from Sheffield of the same name, who began exporting the sturdy knives to North America around 1800. There they immediately enjoyed great popularity and so the first Barlow models also appeared in the history of the Boker Manufactory. Solingen at the end of the 19th century.

This integral version of the timeless classic with a contoured black micarta handle body, which is milled from solid and also forms the signature Barlow bolsters. neither. Handmade in the Boker knife factory in Solingen.

Intended use: EDC / Gentleman / Collection

Type of production: Industrial
Country of production: Germany - Solingen
Blade: Damascus
Handle: micarta and walnut
Blade length: 69mm.
Blade thickness: 2.2mm.
Total length: 125mm.
Weight: 32g.
Closure: SlipJoint (without blade lock)
Clip: -
Packaging: Cardboard box with Boker logos, fabric case with zip, papers
Note: limited edition

Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.

In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.

The full-tang skeleton structure allows to personalize the knife using the Paracord as a coating for the handle.

The Black S600 version uses Böhler S600 steel. This steel is used in industrial manufacturing to make metalworking tools and in mold making.

The high content of Molybdenum, Tungsten and a good presence of Vanadium in its chemical composition, give it excellent qualities of hardness, wear resistance and toughness. The presence of Cobalt favors the formation of small carbides uniformly distributed, a characteristic that enhances and elevates wear resistance.

Satre S600 is hardened and cryogenically treated, thus reaching an exceptional hardness of 64 HRC. This gives it great wear resistance and the ability to guarantee the cutting edge of the wire for a long time.

Böhler S600 has 4.5% Chromium, which makes it a carbon steel and therefore can cause rust and oxidation if neglected. To better protect it from atmospheric agents, we have chosen the new external coating EXP DARK.

The high hardness and resistance to wear and abrasion, make this steel not easy to sharpen.

Intended Use: Neck Knife / Hiking / Utility

Production type: industrial
Country of production: Italy
Blade: Carbon steel Bohler S600 64HRC
Blade treatment: Black EXP DARK
Handle:in carbon steel Bohler S600 64HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).

Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.

In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.

The full-tang skeleton structure, allows to personalize the knife using the Paracord as a coating for the handle.

The Stone Washed version uses Böhler N690 heat treated to 58 HRC. This material is chosen for its ability to resist oxidation, the durability of the edge and above all the reliability it has shown over the years.

Intended Use: Neck Knife / Hiking / Utility

Type of production: industrial
Country of production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade Treatment: Stone Washed
Handle: Stainless steel N690Co 58/60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total lenght: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).

Equipped with a balance in all respects identical to that of the C.A.C® folding knife, this training knife with a fixed blade does not cut and has a round tip. No accidental injury is possible. The blade is however made of hardened stainless steel so that it can be used in all circumstances.

Intended use: training

Blade: stainless steel
Handle: in ABS
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 230mm.
Weight: 158g.
Sheath: -
Notes: Philippe Perotti design

Pratico e compatto, il coltello chiudibile Picnic Bivouac è realizzato a Thiers dalla Tarrerias-Bonjean. È un alleato essenziale per le tue uscite outdoor, la sua lama in acciaio inossidabile temprato è efficace a tavola così come per molte altre applicazioni. 

Intramontabile, pratico e straordinariamente efficiente, questo coltello chiudibile Made in France è molto maneggevole grazie al suo manico ergonomico in ABS. Questo coltello pieghevole viene fornito con una custodia protettiva. Ottimi per picnic di successo o un soggiorno all'aria aperta senza problemi!

Progettato dai team di ricerca e sviluppo TB, Le Bivouac è lo strumento necessario per affrontare qualsiasi situazione: tagliare cibo, pane, filo metallico, cartone, imballaggi, ecc.

Un coltello multifunzione

- lama bloccata in posizione aperta con sistema a pompa
- Apri bottiglia
- Cavatappi
- Forchetta e cucchiaio
- Scatole aperte

I punti di forza del coltello chiudibile Picnic

- Acciaio inossidabile anticorrosione
- Impugnatura in ABS antiurto
- Multifunzione
- Fatto in Francia

Destinazione d'uso: sportivo
Lama: in acciaio inox 
Manicatura: in ABS
Lunghezza lama: 90mm.
Spessore della lama: 2mm.
Lunghezza totale: 140mm.
Peso: 82g.
Fodero: in cordura
Note: 

Practical and compact, the Picnic Bivouac folding knife is made in Thiers by Tarrerias-Bonjean. It is an essential ally for your outdoor outings, its hardened stainless steel blade is effective at the table as well as for many other applications.

Timeless, practical and extraordinarily efficient, this Made in France folding knife is very handy thanks to its ergonomic handle in ABS. This folding knife comes with a protective case. Great for successful picnics or a hassle-free stay outdoors!

Designed by TB R&D teams, Le Bivouac is the tool you need to tackle any situation: cutting food, bread, wire, cardboard, packaging, etc.

A multifunctional knife

- blade locked in open position with pump system
- Open bottle
- Corkscrew
- Fork and spoon
- Open boxes

The strengths of the Picnic folding knife

- Corrosion-resistant stainless steel
- Shockproof ABS handle
- Multifunction
- Made in France

Intended use: sports
Blade: stainless steel
Handle: in ABS
Blade length: 90mm.
Blade thickness: 2mm.
Total length: 140mm.
Weight: 82g.
Sheath: in cordura
Note:

This survival knife was designed by the French Tarrerias-Bonjean in collaboration with the military expert Philippe PEROTTI.

Manufactured in the workshops in Thiers, this survival knife features a MOX ® stainless steel blade. The black PVD coating offers very high wear and corrosion resistance.

Paracord 550 handle ensures a soft, comfortable, but safe grip in all conditions.
Glass shatter on the heel of the knife.

Intended use: collection

Blade: MOX ® 58/59 hrc stainless steel
Handle: in G10
Blade length: 113mm.
Blade thickness: 4mm.
Total length: 246mm.
Weight: 214g.
Sheath: in kydex
Notes: Philippe Perotti design

This survival knife was designed by the French Tarrerias-Bonjean in collaboration with the military expert Philippe PEROTTI.

Manufactured in the workshops in Thiers, this survival knife features a MOX ® stainless steel blade. The black PVD coating offers very high wear and corrosion resistance.

Paracord 550 handle ensures a soft, comfortable, but safe grip in all conditions.
Glass shatter on the heel of the knife.

Intended use: collection

Blade: MOX ® 58/59 hrc stainless steel
Handle: in G10
Blade length: 113mm.
Blade thickness: 4mm.
Total length: 246mm.
Weight: 214g.
Sheath: in kydex
Notes: Philippe Perotti design

This survival knife was designed by the French Tarrerias-Bonjean in collaboration with the military expert Philippe PEROTTI.

Manufactured in the workshops in Thiers, this survival knife features a MOX ® stainless steel blade. The black PVD coating offers very high wear and corrosion resistance.

Paracord 550 handle ensures a soft, comfortable, but safe grip in all conditions.
Glass shatter on the heel of the knife.

Intended use: collection

Blade: MOX ® 58/59 hrc stainless steel
Handle: in paracord
Blade length: 113mm.
Blade thickness: 4mm.
Total length: 246mm.
Weight: 200g.
Sheath: in kydex
Notes: Philippe Perotti design

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Elforyn with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steel

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steel

Intended use: sporting

Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010. 

Intended use: collectible/sporty

Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon 
Notes: -

Tactical pen with T6 6061 aluminum body with PVD finishing and CNC machined; characterized by the new ambidextrous AXIS Bolt Action opening system.

* Weight: 20 g.
* Total length: 8.86 cm.
* Diameter: 1.1cm.
* Movement: AXIS Bolt Action
* Ink: black with Fisher Space refill. It writes at temperatures from -35° to over 120°, under water, on dirty and oily surfaces, it lasts 15 times longer than a normal non-pressurized refill, it can trace a continuous line of 14 km thanks to the special thixotropic ink, with a semi-solid consistency, which is made fluid by the special tungsten ball.

Tactical pen with T6 6061 aluminum body with PVD finishing and CNC machined; characterized by the new ambidextrous AXIS Bolt Action opening system.

* Weight: 25 g.
* Total length: 11.73 cm.
* Diameter: 1.1cm.
* Movement: AXIS Bolt Action
* Ink: black with Fisher Space refill. It writes at temperatures from -35° to over 120°, under water, on dirty and oily surfaces, it lasts 15 times longer than a normal non-pressurized refill, it can trace a continuous line of 14 km thanks to the special thixotropic ink, with a semi-solid consistency, which is made fluid by the special tungsten ball.

Tactical pen with brushed and CNC machined 303 stainless steel body; characterized by the new ambidextrous AXIS Bolt Action opening system.

* Weight: 43 g.
* Total length: 8.86 cm.
* Diameter: 1.1cm.
* Movement: AXIS Bolt Action
* Ink: black with Fisher Space refill. It writes at temperatures from -35° to over 120°, under water, on dirty and oily surfaces, it lasts 15 times longer than a normal non-pressurized refill, it can trace a continuous line of 14 km thanks to the special thixotropic ink, with a semi-solid consistency, which is made fluid by the special tungsten ball.

With this exclusive edition of Coltelleria Collini in collaboration with Fox we chose to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel. 

For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process. 

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Treatment: Satinized
Sleeve and screws: carbon fiber "Space Coral", Frame and screws in Titanium PVD Stonewashed
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 95g.
Closure: Frame Lock with stainless steel casement
Clip: Stonewashed PVD titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos 
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive Coltelleria Collini's version, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel. 

For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process. 

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Treatment: Satinized
Handle and screws: Titanium anodized HDL
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 105g.
Closure: Frame Lock with stainless steel hinge
Clip: HDL anodized Titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos 
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version by Coltelleria Collini, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel. 

For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process. 

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Treatment: Satinized
Handle and screws: Stonewashed PVD Titanium and screws in titanium anodized bronze
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 105g.
Closure: Frame Lock with stainless steel hinge
Clip: HDL anodized Titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos 
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version by Coltelleria Collini, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Intended Use: Sporting / Tactical

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S45VN
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: new 2021 version with CPM-S45VN steel and Stonewashed finish

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stainless steel with Stonewashed and G10 finish
Blade length: 84mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 190mm.
Weight: 108g.
Opening: KVT Bearings system
Washers: in reversible steel
Closure: Frame Lock
Clip: in stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Note: -

Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearings

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening system

Intended use: Sports

Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Boxwood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:

Intended use: sporting

Production type: Industrial
Country of production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finishing: Black Cerakote
Handle: FRN (fiberglass reinforced nylon) with internal stainless steel folders
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 188mm.
Sleeve thickness: 18mm
Weight: 135g.
Locking mechanism: Liner Lock
Clip: Removable and reversible, in stainless steel
Package: Cardboard box with Fox Knives logos 
Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes

Intended use: sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finish: stonewashed
Handle: FRN (fiberglass reinforced nylon) with internal stainless steel folders
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 188mm.
Sleeve thickness: 18mm
Weight: 135g.
Locking mechanism: Liner Lock
Clip: Removable and reversible, in stainless steel
Package: Cardboard box with Fox Knives logos 
Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: ful tang in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 58mm.
Blade thickness: 4.7mm.
Total length: 160mm.
Weight: 93g.
Sheath: in Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dirk Hofmeister - reversible clip integrated into the knife

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: SK-5 steel ful tang
Blade finish: Black PVD
Handle: Micarta
Blade length: 104mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 200g.
Sheath: in Kydex with Tek-Lok type attachment
Packaging: cardboard box with Boker Plus logos
Notes: design by James Helm

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: Carbon Fiber, Titanium
Blade length: 84mm.
Blade thickness: 3.5mm.
Total length: 192mm.
Weight: 148g.
Clip: in steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Steve Kelly

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: VG-10 stainless steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 1.9mm.
Total length: 155mm.
Weight: 54g.
Clip: in steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno

Intended use: Sports / collection

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin
Handle: in G10 Blue / gray
Blade length: 702mm.
Blade thickness: 3mm.
Total length: 170mm.
Weight: 93g.
Clip: in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: pinball opening system on ball bearings - designed by Sam Abdelrahman

Intended use: Sports / collection

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: stonewash
Handle: in G10
Blade length: 89mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 148g.
Clip: in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: pinball opening system on ball bearings

THE BRAND
Exclusive collaboration between Coltelleria Collini and Extrema Ratio marketed under the brand KNIVES.IT. 

TECHNICAL DATA SHEET
Intended Use: Collection / Tactical / Neck knife
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade finish: Black PVD cat. MIL-C-13924
Handle: Stainless steel N690Co 58/60HRC
Blade length: 40mm.
Blade thickness: 5.5mm.
Total lenght: 166mm.
Weight: 86g.
Sheath: optional (available separately) in Kydex, handcrafted by the Italian Knife Maker Simone Tonolli.
Package: cardboard box with Extrema Ratio logos
Notes: knife created and manufactured by Extrema Ratio - each knife is numbered - Design by LoTactical

HISTORY
The Tengu takes its name from a mythical creature of Japanese folklore that is represented with both human and raven features, they had the reputation of being great warriors and legends say that some founders of martial arts were trained by them.

- It is designed to be used in many different grips, but is especially effective in the reverse grip.
- Designed to be carried in a variety of ways, whether as a neck knife, under shirt, clipped in a pocket or around the waist using optional systems such as Ulti-Clip or Tek-Lok or various M.O.L.L.E. type attachments.
- With its thickness of 5.5 mm. is extremely robust and thanks to the shape of the handle is comfortable even by those with large hands or those who want to use it with tactical gloves.
- The blade is compact, robust and very functional for both precision cutting and hard materials thanks to the serrated part on the back. The tanto-shaped tip is very robust and optimal for engraving work.