Luglio 2018
-
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP -
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY -
Benchmade - Bugout Axis - Grey Coated - 535GRY-1 - knife
Use: Sportsman / EDC
Type of production: Industrial
Country of Origin: USA
Blade: CPM-S30V 58 / 60HRC
Blade: Treatment: Grey Coated
Handle: Grivory
Blade Length: 82mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 189mm.
Closure thickness: 10.5mm
Balance: -
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packing: cardboard box with Benchmade logos
Notes: -BM-535GRY-1 -
ExtremaRatio - Shrapnel One Knife - Knife
Intended use: Tactical / Military
Type of production: Industrial
Lama production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade length: 157mm.
Blade thickness: 6.3mm.
Total length: 287mm.
Weight: 289g.
Sheath: tactical, cordura, compatible with M.O.L.L.E.
Packaging: cardboard box with Extrema Ratio logos
Notes: A blade dedicated to those who love taking care of style and details ... without sacrificing the typical Extrema Ratio performanceER-SH-ONE -
Maserin - Nimrod - Carbon Fiber - Design by T. Rumici - 480/CN - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: M390 stainless steel
Lama treatment: Stonewashed
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 133mm.
Overall length: 222 mm.
Thick when closed: 12.1mm.
Weight: 125g.
Closure: BackLock
Clip: deep pocket type, stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Maserin logos
Notes: Skull Crasher optional, included in the package, to be mounted on the shank at the top of the clip - Design by Tommaso RumiciMA-480/CN -
Kai Japan - Shun Premier Tim Mälzer TDM-1722 Utility 16,5 cm - kitchen knives
For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC.
In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design.
True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.Shun Premier Tim Mälzer
Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 165 mm.
Handle length: 105 mm.
Blade thickness: 1.5 mm.
Total length: 275 mm.
Weight: 90 g.
Notes: not dishwasher safeTDM-1701 -
Viper - Pointer Olive Tree - Design by T. Rumici - V4870UL knife
Intended use: Light Utility / Hunting
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Blade treatment: -
Handle: Olive Wood
Blade length: 105mm.
Blade thickness: 3.8mm.
Length closed: -
Total length: 227mm.
Thickness when closed: -
Balancing: 1.5cm back
Weight: 156g.
Closure: -
Clip: -
Sheath: brown leather
Packaging: cardboard box with Viper logos
Notes: Design by Tommaso RumiciV4870UL -
Kai Japan - Shun Premier Tim Mälzer TDM-1709 Carving fork 16,5 cm - kitchen knives
For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC.
In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design.
True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.Shun Premier Tim Mälzer
Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 165 mm.
Handle length: 110 mm.
Blade thickness: - mm.
Total length: 290 mm.
Weight: 148 g.
Notes: not dishwasher safeTDM-1709 -
Kai Japan - Shun Premier Tim Mälzer TDM-1722 Utility serrated 16,5 cm - kitchen knives
For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC.
In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design.
True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.Shun Premier Tim Mälzer
Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 165 mm.
Handle length: 105 mm.
Blade thickness: 1.5 mm.
Total length: 275 mm.
Weight: 90 g.
Notes: not dishwasher safeTDM-1722 -
Kai Japan - Shun Premier Tim Mälzer TDM-1723 Chef's knife 15 cm- kitchen knives
For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC.
In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design.
True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.Shun Premier Tim Mälzer
Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 150 mm.
Handle length: 110 mm.
Blade thickness: 2 mm.
Total length: 285 mm.
Weight: 152 g.
Notes: not dishwasher safeTDM-1723 -
Kai Japan - Shun Premier Tim Mälzer TDM-1727 Santoku 14 cm- kitchen knives
For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC.
In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design.
True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.Shun Premier Tim Mälzer
Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 140 mm.
Handle length: 110 mm.
Blade thickness: 2 mm.
Total length: 275 mm.
Weight: 150 g.
Notes: not dishwasher safeTDM-1727 -
Kai Japan - Shun Premier Tim Mälzer TDM-1715 Peeling knife 5,5 cm- kitchen knives
For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC.
In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design.
True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.Shun Premier Tim Mälzer
Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 55 mm.
Handle length: 105 mm.
Blade thickness: 1.5 mm.
Total length: 165 mm.
Weight: 60 g.
Notes: not dishwasher safeTDM-1715 -
Kai Japan - Shun Premier Tim Mälzer TDM-1700 Paring 10 cm- kitchen knives
For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC.
In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design.
True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.Shun Premier Tim Mälzer
Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 100 mm.
Handle length: 105 mm.
Blade thickness: 1.5 mm.
Total length: 215 mm.
Weight: 74 g.
Notes: not dishwasher safeTDM-1700 -
Kai Japan - Shun Premier Tim Mälzer TDM-1702 Santoku 18 cm - kitchen knives
For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC.
In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design.
True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.Shun Premier Tim Mälzer
Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 180 mm.
Handle length: 120 mm.
Blade thickness: 3 mm.
Total length: 315 mm.
Weight: 212 g.
Notes: not dishwasher safeTDM-1702 -
Kai Japan - Shun Premier Tim Mälzer TDM-1705 Bread knife 23 cm - kitchen knives
For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC.
In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design.
True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.Shun Premier Tim Mälzer
Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 230 mm.
Handle length: 120 mm.
Blade thickness: 3 mm.
Total length: 370 mm.
Weight: 228 g.
Notes: not dishwasher safeTDM-1705 -
Kai Japan - Shun Premier Tim Mälzer TDM-1704 Slicing knife 24 cm - kitchen knives
For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC.
In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design.
True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.Shun Premier Tim Mälzer
Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 240 mm.
Handle length: 120 mm.
Blade thickness: 3 mm.
Total length: 375 mm.
Weight: 206 g.
Notes: not dishwasher safeTDM-1704 -
Cold Steel - Large Voyager Tanto Plain - 29AT - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel AUS-10A
Blade treatment: Stonewashed
Manicure: Long Grive-Ex (EMS Grivory)
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 138mm.
Total length: 235mm.
Thick when closed: 16.5mm.
Weight: 133g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Note: -CS29AT -
Fox - Mini-Ka - Blue Nylon - Sandblasted - FX-535BL - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535BL -
Fox - Mini-Ka - Red Nylon - Sandblasted - FX-535R - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535R -
Fox - Mini-Ka - Orange Nylon - Sandblasted - FX-535O - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535O -
Fox - Mini-Ka - Blue Nylon and Idroglider - FX-535BLB - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535BLB -
Fox - Mini-Ka - Orange Nylon and Idroglider - FX-535OB - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535OB -
Fox - Mini-Ka - Black Nylon - Sandblasted - FX-535 - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535 -
Fox - Mini-Ka - Red Nylon and Idroglider - FX-535RB - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535RB -
Fox - Mini-Ka - Black Nylon and Idroglider - FX-535B - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535B -
Lansky - Quad Sharp Knife Sharpener - pocket sharpener
Lansky pocket sharpener made entirely of heavy painted metal. It offers a possibility to sharpen a variety of degrees thanks to the carbide V elements, preset to: 17 °, 20 °, 25 ° and 30 °. With the addition of a ceramic rod it is perfect serrated (serrated).
Dimensions: about 11 x 1 x 3.5 cm.QSHARP -
Pavoni - DECO PX4306 MOLD PAVOFLEX 300X400
Top-level, liquid platinic silicone molds 300x400 mm, for professional use only. More than 50 innovative shapes to realize sweet or salty mignon and single portions. Pavoflex is produced with a special injection presswork method to let a perfect definition of details. Perfect in oven and blast chiller (from -40°C to + 250°C) 12 INDENTS VOL: 100 MLPX4306 -
Pavoni - MOON PX4307 MOLD PAVOFLEX 300X400
Pavoni - MOON PX4307 MOLD PAVOFLEX 300X400 Top-level, liquid platinic silicone molds 300x400 mm, for professional use only. More than 50 innovative shapes to realize sweet or salty mignon and single portions. Pavoflex is produced with a special injection presswork method to let a perfect definition of details. Perfect in oven and blast chiller (from -40°C to + 250°C) 12 INDENTS VOL: 100 MLPX4307 -
Pavoni - Pavoflex Professional Silicone Mold NATURAL PX4303
Pavoni - Pavoflex Professional Silicone Mold NATURAL PX4303 Top-level, liquid platinic silicone molds 300x400 mm, for professional use only. More than 50 innovative shapes to realize sweet or salty mignon and single portions. Pavoflex is produced with a special injection presswork method to let a perfect definition of details. Perfect in oven and blast chiller (from -40°C to + 250°C)PX4303 -
Laguiole en Aubrac - Sommelier corkscrew Puzzle
Weight: 116 gram Material: wood and polished stainless steel Length: 11,8 cm Specifications Brand: Laguiole en Aubrac Type: waiter's corkscrew Including: bottle opener, corkscrew Type of steel: stainless Finish blade: polished Material handle: ebony wood, juniper wood, oak wood, olive wood, rosewood, walnut wood Total length: 22 cm Closed length: 12 cm Weight: 116 grams Dishwasher safe: no Country of origin: FranceSOM99P13I/LSJ1 -
Mjolnir - Thor's Hammer - Prop Replica - Products taken from Film
Faithful replica inspired by the hammer of Thor
Materials: head and handle made of metalMeasurements: total length 45cm, head 13x13x22 cm
Weight: 4150 gramsSupport in resin
Unofficial product, without logos and licenses
FL-16112.55€245.08Only 2 left -
Pavoni - Cookie cutter mold with Flowers ejector - 3 pcs. Rose
Pavoni - Cookie cutter mold with Flowers ejector - 3 pcs. Rose To create refined and individual flower-shaped decorations for cakes made with almond paste, chocolate, salt paste, modeling and coloring dough. Mold sizes: 30, 50, 70 mm. Plastic material.4869F -
Wander Tactical - Raptor Raw Finish knife - OD green Paracord - craft knife
Use: Neck Knife / Collection
Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed, with cord for use with Neck Knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-RA-BL -
Wander Tactical - Raptor Raw Finish knife - OD green Paracord - craft knife
Use: Neck Knife / Collection
Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed, with cord for use with Neck Knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-RA-G -
Fox - Forest knife 604 - Fixed Blade Micarta - knife
Intended use: Hiking
Type of production: Industrial
Country of production: Italy
Blade: full tang in steel 440
Blade treatment: -
Handle: Micarta
Blade length: 155mm.
Blade thickness: 4mm.
Total length: 285mm.
Balancing: on the guard branch
Weight: 258g.
Sheath: leather, belt, ambidextrous, for vertical port
Packaging: cardboard box with Fox logos
Note: -604M -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP -
Benchmade - 756 - Micro Pocket Rocket by Shane Sibert - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-20CV 59 / 61HRC
Blade treatment: Stone Washed
Handle: Titanium sandblasted with anodized spacers
Blade length: 47.5mm
Blade thickness: 3mm.
Length closed: 72.2mm.
Total length: 122.7mm.
Thick when closed: 11.4mm.
Balancing: -
Weight: 99.8g.
Closure: Frame Lock
Clip: titanium anodized
Packaging: Blue cardboard box with Benchmade logos
Notes: Opening via Carson-Flipper system - Opening movement on ball bearings - Design by Shane SibertBM-756 -
Zero Tolerance - R.J. Martin Folder Titanium knife - Sprint Run - ZT0609BLUBLK - knife
Intended use: Sports / Tactical / Collection
Type of production: Industrial
Country of production: USA
Blade: S35VN stainless steel
Blade treatment: Black Tungsten DLC
Handle: Anodized Titanium
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin - Sprint Run 2018 edition available while stocks lastZT-0609BLUBLK -
Cold Steel - Kukri Plus Machete - CS97KMPS - knife
Intended use: Hiking
Type of production: Industrial
Country of production: South Africa
Blade: 1055 carbon steel
Blade treatment: black protective paint
Handle: Polypropylene
Blade length: 330mm.
Blade thickness: 3mm.
Total length: 470mm.
Balancing: Advanced
Weight: 566g.
Opening: Carson Flipper system
Sheath: Nylon with rigid plastic parts
Packaging: Transparent plastic bag
Note: -CS97KMPS -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB -
ExtremaRatio - BD4 R knife Satin - knife
BD4 R SATIN is a new basic folder with the opening system High Speed Razor Opening System, its blade embodies the classic Italian style, elegant and functional.
Intended use: Sports / Tactical
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 58HRC
Lama treatment: Satin
Handle: Anticorodal
Blade length: 122mm.
Blade thickness: 3mm.
Length closed: 150mm.
Total length: 277mm.
Thick when closed: 17mm.
Balancing: -
Weight: 130g.
Closure: Liner Lock
Clip: removable in stainless steel
Sheath: -
Packaging: cardboard box with Extrema Ratio logos
Note: -ER-BD4R-SA -
Viper - Orso Knife Black G10 - M390 - by Jens Anso V5968GB - Knife
Brand new collaboration between the famous Knife Maker Jens Anso and Viper company, based in Maniago (Italy)
Intended use: Sports / Collection
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60 / 61HRC
Handle: G10
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 11mm.
Balancing: -
Weight: 90g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Packaging: cardboard box with Viper logos
Note: -V5968GB -
Viper - Orso Knife Titanium - M390 - by Jens Anso V5966TI - Knife
Brand new collaboration between the famous Knife Maker Jens Anso and Viper company, based in Maniago (Italy)
Intended use: Sports / Collection
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60 / 61HRC
Handle: titanium
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 11mm.
Balancing: -
Weight: 120g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Packaging: cardboard box with Viper logos
Note: -V5966TI -
Viper - Orso Knife Carbon Fiber - M390 - by Jens Anso V5966FC - Knife
Brand new collaboration between the famous Knife Maker Jens Anso and Viper company, based in Maniago (Italy)
Intended use: Sports / Collection
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60 / 61HRC
Handle: carbon fiber
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 11mm.
Balancing: -
Weight: 80g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Packaging: cardboard box with Viper logos
Note: -V5966FC -
Nordic Ware - Pretty Presents Duet Pan
Nordic Ware - Pretty Presents Duet Pan Bake one to keep and one to give away, or keep them both for entertaining. This pan makes adorable little gift cakes that are just the right size for a small group • 2 cavities, 5 cup total capacity • Cast aluminum with nonstick coating • Limited lifetime warranty • Hand-wash only • Dimensions: 12.6"L x 6.6"W x 2.9"HNW84848 -
Erapuu Antler - Lappland Carver Finland knife 62 - knife
Finnish artisan knife.
These knives are a perfect combination of tradition and construction quality.Intended use: Hunting / Sports
Type of production: artisan
Blade: 59HRC carbon steel
Lama production: Finland
Handle: bone with brass bolster
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 165mm.
Balancing: on the guard branch
Weight: 84g.
Sheath: Brown leather
Note:14550€0.00Only -20 leftOut of stock -
Erapuu Antler - Pocket Finland knife - knife
Finnish artisan knife.
These knives are a perfect combination of tradition and construction quality.
Intended use: Hunting / Sports
Type of production: artisan
Blade: 59HRC carbon steel
Lama production: Finland
Handle: bone
Blade length: 55mm.
Blade thickness: 2mm.
Total length: 125mm.
Balancing: on the guard branch
Weight: 62g.
Sheath: in bone
Note:14553€53.28Out of stock -
Erapuu Antler - Lappland Carver Finland knife 95 - knife
Finnish artisan knives.
These knives are a perfect combination of tradition and construction quality.
Intended use: Hunting / Sports
Type of production: artisan
Blade: 59HRC carbon steel
Lama production: Finland
Handle: bone with brass bolster
Blade length: 93mm.
Blade thickness: 3mm.
Total length: 205mm.
Balancing: on the guard branch
Weight: 114g.
Sheath: Brown leather
Note:14551€0.00Only -20 leftOut of stock -
Laguiole en Aubrac - Sommelier Corkscrew CACTUS
Weight: 116 gram Material: RESIN and polished stainless steel Length: 11,8 cm Specifications Brand: Laguiole en Aubrac Type: waiter's corkscrew Including: bottle opener, corkscrew Type of steel: stainless Finish blade: polished Material handle: RESIN Total length: 22 cm Closed length: 12 cm Weight: 116 grams Dishwasher safe: no Country of origin: France1253CACTUS -
Zero Tolerance - Tan DLC Titanium Flipper - Sprint Run - ZT0095TANBLK - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-S90V stainless steel
Blade treatment: Tan DLC
Handle: titanium with matt black DLC treatment
Blade length: 99mm.
Blade thickness: 3mm.
Length closed: 123mm.
Total length: 213mm.
Thick when closed: 12mm.
Weight: 152g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearings - Carson Flipper opening system - Sprint Run 2018 edition available while stocks lastZT0095TANBLK -
Laguiole En Aubrac - Lo Fau in boxwood - regional knife
Intended use: Collection / Sports
Type of production: artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Boxwood
Blade length: 82mm.
Blade thickness: 2.4mm.
Length closed: 111mm.
Total length: 193mm.
Weight: 53g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruiningLFU99WAI -
Laguiole En Aubrac - Laguiole bovine horn tip 12cm - collection knife
Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.
The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".
The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.
The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.
Intended use: Collection / SportsType of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Mirror polished
Handle: Tip of bovine horn
Blade length: 112mm.
Blade thickness: 3mm.
Length closed: 143mm.
Total length: 255mm.
Weight: 80g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruiningL0514BUI-FSI1 -
Laguiole En Aubrac - Fidelis Ebène - regional knife
The "Fidelis" was born from the desire to pay homage to the "medieval Larzac", with its old Templar villages and legends.
It is a knife that symbolizes the roughness of this land, the rusticity of its vegetation and its climate, but also the nobility of women and men who have worked, modeled, guarded and inserted into this object a soul.
Made in Millau, in the heart of Aveyron, in the cutlery workshops "L'ame du Causse", it is worked with noble materials, such as the precious wood of ebony that the Knights Templars have brought back to their return. Its "sage leaf" blade, made of 12C27 steel, renowned for its cutting quality and ease of maintenance, will be a guarantee of longevity. The "Fidelis" will be your ideal companion to share moments of everyday life full of history.Intended use: Regional
Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade treatment: Satin
Handle: Ebony wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Opening: manual, two-handed
Closure: upper safety ring
Packaging: cardboard case
Note: -2996F -
Wander Tactical - Smilodon Satin SanMai CoS & Black Green Micarta - craft knife
In collaboration with Wander Tactical we have decided to propose their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
Blade treatment: satin
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: unique and exclusive piece.WT-SM-SM -
Wander Tactical - Raptor Compound Raw Finish - woodland Paracord - custom knife
Use: Neck Knife / Collection
Type of production: handmade
Production Country: Italy
Blade: Full tang, D2 Steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-RA-RO -
Wander Tactical - Freedom - Satin SanMai CoS & Black Green Micarta - craft knife
In collaboration with Tactical Wander we decided to bring them light utility, the Lynx model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Application: Light Utility / All Round
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
Lama treatment: Satin
Handle: Micarta
Blade length: 120mm.
Blade thickness: 6.8mm.
Total length: 245mm.
Balancing: set back
Weight: 366g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: unique and exclusive piece.WT-FREE-SM -
Wander Tactical - Barracuda - Satin & Desert Micarta - Limited Edition
Knife born from the collaboration between Wander Tactical and Safer Faster Defense
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in steel D2 at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 100mm.
Blade thickness: 6.5mm.
Total length: 200mm.
Balancing: set back
Weight: 235g.
Sheath: Kydex, thermoformed, with tek-lok attachment
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the product photographed - Limited edition of 5 piecesWT-BARR -
The Witcher - Sword of the Viper by Geralt of Rivia - Prop Replica
THE CHARACTER:
Geralt of Rivia, also called Gwynbleidd - white wolf in the ancient language of the Dryads - and nicknamed "The Butcher of Blaviken" is an witcher, protagonist of the saga of the same name set in the imaginary fantasy universe created by the Polish writer Andrzej Sapkowski.
From the famous series of books of which he is the protagonist were also drawn various media, including a film, a television series and a trilogy of international success.
THE SWORD:
Blade: 440C stainless steel without sharpening
Handle: black rope
Knob: in aluminum alloy
Guard: in steel
Blade length: 89.5cm
Total length: 124.5cm.
Sheath: in leather, with rigid insert, steel trim and belt for hooking
Packaging: cardboard box
Notes: Detailed replication of good quality, but not official, without original logos and licensesFL-9321.55€102.46Only 0 leftOut of stock -
The Witcher - Sword of the Wolf by Geralt of Rivia - Prop Replica
THE CHARACTER:
Geralt of Rivia, also called Gwynbleidd - white wolf in the ancient language of the Dryads - and nicknamed "The Butcher of Blaviken" is an witcher, protagonist of the saga of the same name set in the imaginary fantasy universe created by the Polish writer Andrzej Sapkowski.
From the famous series of books of which he is the protagonist were also drawn various media, including a film, a television series and a trilogy of international success.
THE SWORD:
Blade: 440C stainless steel without sharpening
Handle: brown rope
Knob: in aluminum alloy
Guard: in steel
Blade length: 89.5cm
Total length: 124.5cm.
Sheath: in leather, with rigid insert, steel trim and belt for hooking
Packaging: cardboard box
Notes: Detailed replication of good quality, but not official, without original logos and licensesFL-9320.55€102.46Only 0 leftOut of stock -
Benchmade - Foray Axis - Gold Class Limited Edition - 698-181 - knife
Intended use: Collection
Type of production: Industrial
Lama production: USA
Blade: damascus inox by Damasteel with Loki design
Blade treatment: -
Handle: marbled carbon fiber with mother-of-pearl inserts
Blade length: 82mm.
Blade thickness: 3.5mm.
Length closed: 101mm.
Total length: 186mm.
Thick when closed: 14mm.
Weight: 98g.
Closure: AXIS Lock
Clip: Removable and reversible, in stainless steel
Sheath: Black fabric bag with golden Benchmade logos
Packaging: "Gold Class" cardboard box with Benchmade logos - Black casket with rubber finish and Benchmade logos in gold color - Certificate of guarantee and authenticity
Notes: Limited Edition 2018 - each piece is numbered on the blade, box and certificatesBM-698-181 -
Wander Tactical - Tryceratops - SanMai CoS & Green Micarta - custom knife
In collaboration with Wander Tactical we decided to propose one of their most iconic knives, the Tryceratops model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Application: outdoor / hunting
Type of production: handmade
Production Country: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.8mm.
Overall length: 130mm.
Balancing: backward
Weight: 210g.
Sheath: Kydex, thermoformed, with Tek-Lok system
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.COS-TR-GR -
Pulltex - Metallic Bottle Opener
Metallic bottle opener for crown stoppers. Build in resistant materials with an elegant design. Easy to carry in a pocket due to the reduced size and weight, it is the perfect tool for professional use thanks to its ergonomic shape that remember the handle of our classic and original corkscrew. 2 units in each blister.0681Q -
Laguiole en Aubrac - Sommelier Corkscrew Olive wood
I primi coltelli Laguiole avevano manici in corno e osso. Oggi in aggiunta ci sono molti altri materiali come div. tipi di legno. Un sommelier Laguiole en Aubrac è un investimento per la vita - prezioso e senza tempo. Interamente realizzato a mano a pochi chilometri dal villaggio di Laguiole, Francia. Il "Laguiole en Aubrac ®" Luxury collection di cavatappi offre un design Laguiole contemporaneo combinato con funzionalità insuperabile e qualità di lavorazione. Tutti i cavatappi di lusso offerti da Laguiole en Aubrac sono interamente realizzati da un singolo artigiano dall'inizio alla fine per assicurare l'orgoglio di proprietà del pezzo finale. Cavaturaccioli Francese
Elegantissimo cavaturaccioli della nota azienda francese Laguiole.
Ogni Laguiole é unico.
È durante il processo di lavorazione del cavatappi che risiede la differenza tra la produzione industriale e la fabbricazione artigianale che è la sola che garantisce il fatto che ogni Laguiole è un'opera unica.
Caratteristiche:
1/principali criteri di qualità di una fabbricazione artigianale locale.
2/il montaggio, l'assemblaggio, i completamenti.
3/il lavoro del legno prezioso.
4/le creazioni personalizzate.
Manicatura: Entrambe le parti in legno di ulivo Peso: 116g Dimensioni: 11,5 centimetri Finitura: spazzolato 12C27 Sandvik in acciaio inox. Confezione in scatola di legno chiara.8170 -
Laguiole En Aubrac - L'ame du Pélerin Noyer - regional knife
The pilgrims who went to Santiago de Compostela in Galicia used as a symbol a shell (Coquille St.Jaques for the French), which could be collected on the beach of the ocean not far away and served in a symbolic and practical way to collect the water from the streams or springs during the long and often tiring journey. Precisely the shell, over time, became the emblem in general of the pilgrim. the shell is a universal sacred symbol, both as a ritual tool and as an ornamental motif. The shell recalls the uterus and above all the universal uterus which is the container of the original Waters and the germs of beings. It evokes in a surprising way this dark abyss of creative energy. The shell has remained a living baptismal symbol to this day: the tool used to draw the Holy Water and pour it onto the forehead of the new one is often made of a metallic shell.
Intended use: Regional
Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade treatment: Satin
Handle: Walnut wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Opening: manual, two-handed
Closure: without security systems
Packaging: cardboard case
Note: -2996 -
Laguiole en Aubrac - Sommelier Corkscrew in cork wood
I primi coltelli Laguiole avevano manici in corno e osso. Oggi in aggiunta ci sono molti altri materiali come div. tipi di legno. Un sommelier Laguiole en Aubrac è un investimento per la vita - prezioso e senza tempo. Interamente realizzato a mano a pochi chilometri dal villaggio di Laguiole, Francia. Il "Laguiole en Aubrac ®" Luxury collection di cavatappi offre un design Laguiole contemporaneo combinato con funzionalità insuperabile e qualità di lavorazione. Tutti i cavatappi di lusso offerti da Laguiole en Aubrac sono interamente realizzati da un singolo artigiano dall'inizio alla fine per assicurare l'orgoglio di proprietà del pezzo finale. Cavaturaccioli Francese
Elegantissimo cavaturaccioli della nota azienda francese Laguiole.
Manicatura in legno di sughero e acciaio satinato.
La fabbricazione è artigianale.
Ogni Laguiole é unico.
È durante il processo di lavorazione del cavatappi che risiede la differenza tra la produzione industriale e la fabbricazione artigianale che è la sola che garantisce il fatto che ogni Laguiole è un'opera unica.
Caratteristiche:
1/principali criteri di qualità di una fabbricazione artigianale locale.
2/il montaggio, l'assemblaggio, i completamenti.
3/il lavoro del legno prezioso.
4/le creazioni personalizzate.1254