military and tactical knives

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: still in production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: None
* Marks on handle: a few small marks on clip, hardware, and aluminum spacer
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: N690Co 58HRC steel with Grade 5 titanium back (49-50HRC)
Blade finish: stonewashed
Handle: G10
Blade length: 91mm.
Blade thickness: 5mm.
Length closed 127mm.
Total length: 216mm.
Thickness when closed: 25mm.
Balance: Backward, 3cm from the top of the guard.
Weight: 186g.
Latch: Liner Lock, with manual insertion safety
Clip: Stainless steel, reversible
Notes: previously purchased knife, withdrawn from private collection

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility 

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition

Official reproduction, made under film license by Hollywood Collectibles, of the knife used in the film "Rambo III". This model features a signature on the blade of John Rambo and is a limited edition.

Intended use: Survival/Collection

Blade: 420J2 stainless steel
Country of production China
Handle: in wood, with stainless steel guard and knob
Blade length: 320mm.
Blade thickness: 5.5mm.
Total length: 455mm.
Balancing: advanced
Weight: 922g.
Sheath: leather
Notes: Official reproduction under cinematographic license
Limited Edition: blade and scabbard signed "John Rambo", limited and numbered edition made in 10,000 copies

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Full set, NOS (new old stock / stock fund).
* Condition: Brand new, never taken out of wooden box.
* Commercially available: Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Iconic knife produced by Puma and dating back to the late 1980s, featuring a then very modern line and a steel that was very advanced for the time (154CM). 

Intended Use: Collection / Vintage / Tactical

Type of production: Semi-industrial
Country of Production: Germany
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: integral, stainless steel and Brazilian Jacaranda wood
Blade length: 165mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 320g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - NOS (new old stock) - Brand new

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpening: factory
* Marks on blade: none
* Marks on handle: none
* Box: in original Maserin cardboard
* Sheath: -
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and certified by our internal laboratory

Intended use: Tactical/Sports

Type of production: Industrial
Blade production: Italy
Blade: N690Co steel
Blade Treatment: -
Handle: Aluminum with Ebony insert
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 140mm.
Total length: 235mm.
Balancing: -
Weight: 166g.
Closure: Back Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: overall in very good condition
* Commercially available handcrafted version no longer commercially available.
* Sharpening: factory sharpened, never resharpened
* Marks on blade: none
* Marks on handle: a few tiny little marks on carbon
* Box: present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Utility / Collection

Production type: MidTech
Country of Manufacture: USA (Wampum, Pennsylvania)
Blade: CPM-CruWear 63/64HRC steel
Blade treatment: Stonewashed
Handle: 5mm thick Carbon Fiber with stainless steel top folder
Blade length: 95mm.
Blade thickness: 4.5mm.
Total length: 220mm.
Weight: 174g.
Closure: Shark-Lock
Clip: stainless steel
Packaging: cardboard box with Demko logos
Notes: previously purchased knife from private collection - rare semi-crafted version (MidTech) personally made by the knife maker in his own workshops in Wampum, discontinued and no longer commercially available

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While maintaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: satin finish
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from the 1990s, previously purchased.
* Condition: In very good condition
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: Small marks given by time.
* Marks on handle: None
* Box: -
* Scabbard: Present, but presumably not original although fully compatible.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8A
Blade Finish: Satin finish
Handle: Kraton
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 263mm.
Balance: advanced
Weight: 225g.
Scabbard: brown leather, belt-mounted, presumably not original but fully compatible
Packaging: -
Notes: previously purchased knife, from private collection

In the years since the 535 Bugout was launched, this slim, lightweight and durable folder has redefined EDC style and versatility, from the trail to the workplace and amidst all of life's adventures.

The 535-12 Bugout is an instant eye-catcher, made of easy-care premium CPM-S30V stainless steel with a stonewashed finish and powder-colored Grivory handle with backspacer and gold anodized thumb stud for a touch of color and class-the must-have tool in your outdoor kit.

Intended Use: Sporting / EDC

Production type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC stainless steel
Blade finish: Stonewashed
Handle: Grivory
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -

The Swoopy makes a splash! Knife designer and U.S. Marine Corps expert Michael Burch, from the U.S. state of Idaho, performs like no other on the EDC stage with this new Boker Plus. Fine materials, elegant features, and high-quality workmanship mean the Swoopy has plenty of groupies.

The Modified-Wharncliffe Nitro-V ball-bearing blade with stonewash finish opens smoothly through the thumb hole; the sturdy stainless steel frame lock and non-slip catches ensure safe work even in tough conditions. Vertical grooves in the sand-brown G10 handle's front cheekpiece ensure a firm grip and stylishly reflect the knife maker's tactical experience. The tip-up clip and lanyard hole make the knife pocket-sized and easy to carry.

Intended Use: EDC / Sporting

Production type: Industrial
Country of manufacture: China
Blade: Nitro-V stainless steel
Blade finish: stonewash
Handle: G10 and stonewash stainless steel
Blade length: 79mm.
Blade thickness: 3.1mm.
Total length: 180mm.
Weight: 93g.
Clip: removable, stainless steel
Packaging: cardboard box with Boker Plus logos and cordura pouch with zipper
Notes: design by Michael Burch

The Ant is the most compact among Extrema Ratio's folding knives. Despite its small size, this model features an extremely sturdy, durable, and reliable structure.

The handle is made of two different elements: the cheek piece crafted from anodized anticorodal aluminum and the hardened steel frame which also serves as the blade lock (Frame Lock System). This mechanism involves a part of the frame bending inward to firmly secure the blade in the open position, enhancing the user's safety during the knife's use.

The tang features a hole for the insertion of a lanyard, and on the right side of the handle, there is a steel clip that allows for concealed carry in the pocket.

The Ant is available in 4 versions with two different types of steel, both provided by Böhler, an Austrian company with which Extrema Ratio has been collaborating for over 20 years, using its highly esteemed materials for the production of its blades.

For the Stone Washed M390 version, Extrema Ratio uses Böhler M390 steel, thermally treated to 61 HRC, which, thanks to a powder metallurgy production process, ensures cutting effectiveness, wear resistance, and oxidation resistance over time.

The blade is sheep foot-shaped and has a small hole on the top part to facilitate opening. Its particular structure, with a straight edge, allows the user to comfortably rest their fingers on the back of the knife and use it with ease.

Type of production: industrial
Blade: in stainless steel M390 61HRC
Blade production: Italy
Handle: anodized anticorodal aluminum and steel
Blade length: 70mm.
Blade thickness: 2.2mm.
Closed length: 55mm.
Total length: 127mm.
Balancing: -
Weight: 42g.
Closure: Frame Lock
Clip: removable stainless steel
Sheath: -
Notes:

The slim profile and carbon fiber handle provide comfortable and lightweight carry for the Zero Tolerance 0545. Moreover, the 0545 model is appropriately sized for serious cutting tasks. The CPM MagnaCut steel blade is balanced and highly performant.

Aesthetically, this ZT Original boasts a clean design without visible screws for the pocket clip.

Produced in the United States, the premium CPM MagnaCut steel of the blade, achieved through powdered metallurgy, excels in edge retention, corrosion resistance, wear resistance, and toughness; the stonewashed finish helps conceal signs of use.

The blade opens easily and effortlessly thanks to the KVT system with ball bearings, washers, and flipper.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut Steel 60-63 HRC
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 81mm
Blade thickness: 2.3mm
Closed length: 109mm
Overall length: 190mm
Weight: 57g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearings

As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.

The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.

The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.

With a reversible clip for pocket carry and a lanyard hole. Made in the USA.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S90V (59-61 HRC)
Blade treatment: Satin finish
Handle: Carbon fiber with anodized aluminum spacers
Blade length: 91mm.
Blade thickness: 3mm.
Length closed: 123mm.
Total length: 215mm.
Weight: 116g.
Closure: Axis
Clip: stainless steel with PVD treatment, removable
Packaging: cardboard box with Benchmade logos

Intended Use: Tactical/Sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel Elmax SuperClean 59/61HRC
Blade Finish: Satin finish
Handle: carbon fiber and stainless steel damascus effect handle, 1.4116 stainless steel liners and GR2 titanium spacer
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 210mm.
Weight: 145g.
Closure: liner lock with integrated Smart Automatic Safe Lock System.
Clip: stainless steel 1.4116, removable and reversible
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio "Silvester" Silvestrelli

Intended use: Tactical / sport

Type of production: Industrial
Production Lama USA with assisted opening
Blade: steel 154CM 58 / 61HRC
Blade treatment: -
Handle: Black Valox polymer
Blade length: 73mm.
Blade thickness: 2.5 mm.
Closed Length: 101mm.
Overall length: 175mm.
Thick when closed: -
Balancing: -
Weight: 96g.
Closing: AXIS Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with Benchmade logos
Notes: design by Osborne

Intended Use: Utility / Hiking

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut 63/65HRC tool steel
Blade finish: Satin finish
Handle: Marble Carbon Fiber with FDE stainless steel folders
Blade Length: 82.6mm.
Blade thickness: 3.6mm.
Length closed: 111mm.
Total length: 193mm.
Handle thickness: 16mm.
Weight: 130g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, stainless steel with FDE finish
Packaging: cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: high-carbon steel blade, not stainless; wash and dry carefully after use and grease in case of storage

Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with a CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!

Intended Use: Sporting

Type of production: Mid-Tech
Country of manufacture: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Tumbled / Stonewashed
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

As one of the four blacksmiths, the dwarf Dvalin created the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel is attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on the earth.

However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to unleash wars in the world of men. Dirk Hofmeister of Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.

The powerful Dvalin Folder Tanto impresses with its compact dimensions and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep engraving on both sides to open the folding knife using the recess as a nail lever.

The engraving on the top of the blade offers a secure grip for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partly grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.

With a commercial 3D printer, it is possible to print alternative handles in various shapes, colors, and materials. The Tip-Up (r) clip matches the handle's texture, while the lanyard hole increases ease of use. It comes with a high-quality nylon case for storage.

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -

As one of the four smiths, the dwarf Dvalin crafted the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel was attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on earth.

However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to instigate wars in the world of men. Dirk Hofmeister from Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.

The powerful Dvalin Folder Tanto stands out for its compact size and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep groove on both sides for opening the folding knife using the recess as a nail lever.

The groove on the top of the blade provides a secure support for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partially grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.

With a commercial 3D printer, it is possible to print alternative handles in a variety of shapes, colors, and materials. The Tip-Up (r) clip mirrors the texture of the handle, while the hole for the lanyard enhances ease of use. It comes with a high-quality nylon case for storage.

Intended use: Utility
Production type: Industrial
Country of production: China
Blade: full tang in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -

Rigorous efficiency or flexible dynamics? - A question that doesn't even arise for Alessandra de Santis's Boker Plus Gemtek. It can do both, not to mention the nuances in between. The designer from Hydra Design is known for her spirited creations with maximum functionality.

The Gemtek confidently joins this series and presents itself as a folding knife with a Frame Lock mechanism, featuring a Modified-Droppoint blade in high-performance D2 steel, which opens with a Flipper and impresses with its stonewash finish and a decorative false edge.

The handle front is made of gray G10, equipped with a discreet triangular texture for optimal grip. Carefully balanced elements such as the red spacers with an integrated loop and a G10 triangle on the back, reflecting the structure of the handle's front, elegantly complete the pocket knife's appearance.

The Tip-Up (r) clip allows for deep carry, ensuring the knife almost entirely disappears in the pants pocket. It comes with a high-quality nylon case for storage.

Intended use: Tactical

Type of production: Industrial
Country of production: Taiwan
Blade: in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 72mm.
Blade thickness: 3.7mm.
Total length: 176mm.
Weight: 132g.
Clip: removable stainless steel
Locking mechanism: Frame Lock
Packaging: nylon zippered case - cardboard box with Boker Plus logos
Notes: opening with Carson Flipper system on ball bearings - design by Alessandra De Santis

The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."

The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.

All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: Composite made of G10 and Carbon Fiber
Blade Length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.

Type of production: Industrial
Country of production: USA
Blade: in CPM-S90V steel 59/61HRC
Blade finish: Satin
Handle: Carbon Fiber
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed length: 97.5mm.
Total length: 172mm.
Thickness when closed: 10mm.
Weight: 54g.
Lock: AXIS Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Design by Warren Osborne

Ferrum Rescue is a tool designed for rescue operations, developed in collaboration with my friend Andrea Micheli, military and law enforcement expert, journalist and shooting instructor. Made with a very compact handle, this rescue tool is equipped with 3 blades, each of which has a specific function:

The first and main blade has a thickness of 3 millimeters and is designed to be used for more demanding purposes and to protect the cutting edge of the other two from premature wear. The teeth allow it to cut larger ropes or textile materials, the remaining smooth part has the classic function of a knife. The second blade is a scalpel, which can be used for extremely precise cuts and for emergency first aid interventions. The third blade, on the back of the first, is the smallest of the 3, it has the function of cutting lines, capable of cutting paracord and aramid material.

The interaction of the main blade with the scalpel allows the operator to make a quick emergency cut to free any injured person from his or her clothing.

The line cutter blade and the scalpel are both interchangeable.

Ferrum Rescue has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system. On the back there is also a hard metal glass breaker.

Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the operator to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

The reversible clip is positioned on the back.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 56mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 170mm. (18mm. INCLUDING SCALPEL BLADE)
Weight: 85g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Ferrum E is a simple, essential and functional EDC (Every Day Carry) folding knife. Equipped with a drop blade, it has a slim and compact shape, the two anodised anticorodal aluminium sheaths make up a light, slender and at the same time very durable handle. It can be housed in a breast pocket, in small torch holsters or inside a single M.O.L.E. loop.

Equipped with a flipper-assisted opening system, the blade rotates on ball bearings that allow for smooth and uncertainty-free blade movement. This mechanism allows the operator to open the blade quickly and easily, even with one hand. The locking system adopted is the tried and tested liner lock.

The reversible clip is positioned at the rear.

Intended use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 186mm.
Weight: 87g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Ferrum E is a simple, essential and functional EDC (Every Day Carry) folding knife. Equipped with a drop blade, it has a slim and compact shape, the two anodised anticorodal aluminium sheaths make up a light, slender and at the same time very durable handle. It can be housed in a breast pocket, in small torch holsters or inside a single M.O.L.E. loop.

Equipped with a flipper-assisted opening system, the blade rotates on ball bearings that allow for smooth and uncertainty-free blade movement. This mechanism allows the operator to open the blade quickly and easily, even with one hand. The locking system adopted is the tried and tested liner lock.

The reversible clip is positioned at the rear.

Intended use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 186mm.
Weight: 87g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

The Bravo Two Classic BK is equipped with an FDE (Flat Dark Earth) fibreglass handle and a Tanto blade with a Dark Stonewashed finish.


Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacture

To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

The Bravo One Classic BK features an FDE (Flat Dark Earth) fibreglass handle and a Drop point blade with a Dark Stonewashed finish.


Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacture

The Boker Plus Accomplice by John Gray is a very compact and handy EDC or reserve knife, which with its slim handle and the typical karambit ring at the end of the handle combines a high level of user comfort with the discretion of an excellent hand position. It can also be carried as a large neck knife. The G10 handles feature a textured groove and are fully contoured, so that the Accomplice virtually nestles in the hand. The blade is made of D2 and features a satin finish. Comes with customised Kydex sheath and large belt adapter.

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: China
Blade: Full tang, D2 steel
Blade finish: Satin finish
Handle: G10
Blade length: 82mm.
Blade thickness: 4.1mm.
Total length: 111mm.
Weight: 111g.
Sheath: in kydex, with Tek-Lok type multi-position attachment
Packaging: Cardboard box with Boker Plus logos
Notes: Design by John Gray

This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.

The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.

This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!

Intended Use: Collector/Sportsman

Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V 
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

From the hit Lionsgate film "Rambo: Last Blood" comes this accurate replica of the Heartstopper tactical knife. It is an exact replica of the fully functional knife used in the film, from Sylvester Stallone's personal knife collection. United Cutlery, maker of the first licensed replica of the Rambo knife, created this version of the Heartstopper using only the highest quality materials and production methods, including precision CNC machining and finishing.

Intended Use: Collection

Production Type: Industrial
Country of manufacture: China
Blade: full tang in 7Cr17MoV stainless steel
Blade treatment: Dual Tone
Handle: Micarta
Blade length: 229mm.
Blade thickness: 6mm.
Total length: 381mm.
Balance: advanced
Weight: 790g.
Sheath: leather
Packaging: cardboard box with Rambo Last Blood logos.
Notes: original and official product, with film licenses Lions Gate Entertainment Inc.

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stainless steel and G10
Blade length: 74mm.
Blade thickness: 3.1mm.
Length closed: 109mm.
Total length: 183mm.
Thickness when closed: 13mm.
Weight: 119g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: FrameLock
Clip: deep pocket, stainless steel, removable
Packaging: cardboard box with Kershaw logos
Notes: Opening via Carson-flipper system on KVT ball bearings

As a Filipino martial arts enthusiast, Italian knife designer Alessandra De Santis of Hydra Design decided to design a Karambit knife for Boker Plus. These sickle-shaped knives originated in Southeast Asia and were preferably used for harvesting rice. In contrast, the Karambit from Boker Plus comes in a tactical guise. The 154CM Hawkbill blade effortlessly slices its way through cardboard and ropes, while the G10 handle and sturdy linerlock provide the necessary safety on the job.

Light weight and high efficiency form the backbone of the pocket knife named after the Norse goddess of the underworld. As an alternative to the flipper opening, the knife offers a thumb stud screwed into the back of the blade whose shape also serves as an "Emerson Wave"-style opening. Alessandra De Santis' characteristic angular design elements are found in the G10 ring at the end of the handle. The flush, reversible clip allows for flexible knife carrying. Supplied with a high-quality nylon pouch.


Intended Use: Tactical

Production type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel 154CM
Blade treatment: satin finish
Handle: G10
Blade length: 61mm.
Blade thickness: 2.8mm.
Total length: 170mm.
Weight: 93g.
Clip: removable and reversible, stainless steel
Closure: LinerLock 
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings and via "Emerson Wave" style pin - design by Alessandra De Santis

Surgical precision, a clean cut, and a sense of pride in what you've achieved: the Böker Plus scalpel knife by Alexander Krava provides the dexterity needed for everyday, delicate cutting tasks. The compact all-steel construction in D2 is modeled on a scalpel but convinces as an absolutely practical neck knife.

The bulbous blade has a satin finish and cuts through cardboard boxes with equal concentration and effortlessness, and steps in for crafts where scissors can go no further. Epoxy handle inserts and serrations on the wrist rest increase control while working. Supplied with a black ball chain and custom-made Kydex sheath.

Intended Use: Tactical / CQB 

Production type: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 42mm.
Blade thickness: 2.6mm.
Total length: 125mm.
Balance: -
Weight: 14g.
Sheath: Neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Design Alexander Krava

Extrema Ratio S-THIL STONE WASHED is a tactical backup knife with monolithic construction machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with Thilo designer Arnd Schiller.

The blade, a spear point type, is hardened to 58 HRC in order to achieve the best balance of edge retention and strength, features a false counterbore at the top that enhances penetration and point work characteristics, and has a full-length groove (fuller) that flows elegantly from the blade to the handle. The blade is milled integrally to the knife to enhance its compactness and lightness, maintaining a minimal thickness while still having a profile reminiscent of the classic Extrema Ratio handle.

That profile goes to form two small guards and a comfortable thumb rest to prevent the hand from slipping towards the blade. On the end are a skull crusher with a diamond-shaped tip and a slot that allows a wrist strap to be attached to the knife or the handle to be fitted with paracord coiling.

The molded nylon sheath is designed to be extremely flat with very small side dimensions to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the blade cutting edge to the right or left. The double retention system integral to the sheath consists of four pressure elements that work only two at a time, depending on right/left-handed use, while the nylon textile part has a button that allows the knife to be secured to the sheath.

The end of the sheath has a hole to expel liquids or debris inside. The ability to attach belt clip, ulticlip, malice clip makes it extremely versatile. You can also attach the sheath to the M.O.L.L.E. system by braiding the paracord.


Intended Use: Tactical/Multi-role

Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Stonewashed
Handle: Steel N690Co 58HRC
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: Nylon
Packaging: cardboard box with Extrema Ratio logos
Notes: -

This special edition in 250 pieces, proposed on the occasion of the 25th anniversary of the brand, maintains the shape of the original, but with materials and finishes corresponding to the current production.

The K1 is equipped with a modified spear point profile blade, characterized by a tip that combines the 40° "tanto" profile with the more traditional European one, creating a sharp but very solid hybrid which, with the false false edge, makes it particularly effective in jab. The bevel is high, allowing for a very effective cutting angle.

The blade is immediately recognizable by the fenestration at the heel, which allows for considerable lightening without compromising its strength. It is made of Böhler N690 steel, with heat treatments that bring its hardness to 58 HRC for the best combination of edge hold and resistance. The finish is satin with flat grinding.

The handle, in anodized Anticorodal alloy, compared to the original presents the lightening on the sides that make the Extrema Ratio knives immediately distinguishable, but maintains the arched shape and the lateral "bellies" of the K1, offering an excellent grip both in the "saber" than in the "reverse" grip.

The terminal part of the handle curves to form a sort of hook which allows particularly easy and rapid extraction from the scabbard, while the tang protrudes from it with a triangular cusp which acts as a glass breaker with a slot which allows the knife to be equipped of lasso.

The leather scabbard faithfully reproduces the original while maintaining both the qualities of ease and speed of extraction. The carry can take place in an upside-down axillary position, horizontally on the belt or tactically on the thigh.

The K1 equipment is completed with a polypropylene case ‌, complete leather sheath and underarm shoulder strap.

WEIGHT g.: 493
WEIGHT OZ.: 17.39
BLADE LENGTH (MM): 210
BLADE LENGTH (IN): 8.26
TOTAL LENGTH (MM): 351
TOTAL LENGTH (IN): 13.81
BLADE THICKNESS (MM): 6.3
BLADE THICKNESS (IN): 0.25
BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)
BLADE FINISH: SATIN
BLADE GRINDING: FLAT EDGE
HANDLE MATERIAL: ANODIZED ANTICORODAL ALUMINUM

15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.

ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!


Intended Use: Collection / Hunting

Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey Underwood

15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.

ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!


Intended Use: Collection / Hunting

Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey Underwood

15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.

ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!


Intended Use: Collection / Hunting

Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey Underwood

15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.

ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!


Intended Use: Collection / Hunting

Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey Underwood

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.

Intended use: tactical/military/hunting

Blade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995. 

With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Three covers a wide range of applications.

The modern Spear Point blade and handle of the Charlie Three are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.

Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip. 

The Charlie Three BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

Intended Use: Tactical/Sporting

Blade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.

The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.

Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:

* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.

* Wave: Ernest Emerson's patented system that allows the blade to hook into the pocket of the pants, on extraction, allowing it to open automatically with the right motion.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Stonewashed
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst Emerson

With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.

The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

The Compact Two SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

Intended use: Tactical / Sporting

Blade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.

With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

The focus is on the massive, classic Bowie blade of the Compact One, which is 88 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.

The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

The Compact One SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

Intended use: Tactical / Sporting

Blade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 88mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.

Intended Use: Training

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 420
Blade Finish: Stonewashed
Handle: Stainless steel
Blade Length: 114mm.
Blade thickness: 3.7mm.
Length closed: 138mm.
Total length: 252mm.
Weight: 124g.
Closure: T-latch
Clip: -
Package: Cardboard box with Boker Plus logos
Notes: -

The Boker Plus Kazhan is designed by Alexander Krava and is a practical neck knife with a short Sheepfood-shaped blade, practical and light, ideal as a back-up tool. The young cutler from Lviv, Ukraine places particular emphasis on the aesthetics of his models, which convince not only as reliable tools but also as high-quality accessories. The skeletonized Kazhan is made of D2 with a dark stonewash finish. Supplied with chain and custom Kydex sheath.

Intended use: Tactical / CQB

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 56mm.
Blade thickness: 4mm.
Total length: 140mm.
Balancing: -
Weight: 62g.
Sheath: For neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Alexander Krava design

This model originates from Col. Rex Applegate's project the "Boker Smatchet", developed as a large combat knife, also perfect as a multifunctional tool for outdoors.

Starting from that project, Chuck Gedraitis' new Boker Plus Pocket Smatchet combines the design of the famous classic with the advantages of a practical pocket knife.

The sturdy Pocket Smatchet features a VG-10 Spearpoint blade, featuring a durable stonewash finish. The removable thumb pin on the back of the blade allows for ambidextrous opening, while the linerlock reliably locks it in place. The sturdy clip is milled from solid and also features the characteristic indentations of the classic Smatchet. With lanyard hole and high quality nylon case for storage.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Taiwan
Blade: VG-10 stainless steel
Blade treatment: stonewash
Handle: in micarta
Blade length: 95mm.
Blade thickness: 3.9mm.
Weight: 207gr.
Total length: 235mm.
Clip: in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Note: design by Chuck Gedrait

Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.

In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.

The full-tang skeleton structure, allows to personalize the knife using the Paracord as a coating for the handle.

The Stone Washed version uses Böhler N690 heat treated to 58 HRC. This material is chosen for its ability to resist oxidation, the durability of the edge and above all the reliability it has shown over the years.

Intended Use: Neck Knife / Hiking / Utility

Type of production: industrial
Country of production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade Treatment: Stone Washed
Handle: Stainless steel N690Co 58/60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total lenght: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).

The BF2 is a "full size" lockable particularly suitable for professional use by military and police operators in the field. The handle is firm and comfortable; the clip, reversible and enveloping, becomes a useful and comfortable support for the thumb in "reverse grip". The grip is full with the characteristic lowered surfaces to engage the opening "pins" without protruding from the profile of the closed knife. The blade, available in a drop or a lot version, has a flat edge and, as in the BF1, a particularly thick and resistant tip. The blade locking mechanism is the tested LINER-LOCK, assisted by a safety mechanism to be operated manually protected by a casing.

Intended use: Tactical / Military

Type of production: industrial
Blade: N690Co 58HRC stainless steel
Country of production: Italy
Handle: Anticorodal
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 124mm.
Total length: 210mm.
Balancing: -
Weight: 142g.
Closure: Liner Lock
Clip: reversible and removable in stainless steel
Sheath: -
Notes: Safety stop with open knife

Il BF2 è un chiudibile “full size” particolarmente indicato per l’impiego professionale da parte di operatori militari e di polizia sul campo. L’impugnatura è salda e confortevole; la clip, reversibile ed avvolgente, diventa un utile e comodo appoggio per il pollice in “reverse grip”. La guancetta è piena con i caratteristici piani ribassati per impegnare i “pin” d’apertura senza che sporgano dal profilo del coltello chiuso. La lama, disponibile in versione drop o tanto, ha l’arrotatura piatta e, come nel BF1, la punta particolarmente spessa e resistente. Il meccanismo di blocco della lama è il collaudato LINER-LOCK, coadiuvato da un meccanismo di sicura da azionare manualmente protetto da un carter. 

Destinazione d'uso: Tattico/Militare

Tipo di produzione: industriale
Lama: in acciaio inox N690Co 58HRC
Paese di produzione: Italia
Impugnatura: Anticorodal
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 124mm.
Lunghezza totale: 210mm.
Bilanciatura: -
Peso: 142g.
Chiusura: Liner Lock
Clip: reversibile ed amovibile in acciaio inox
Fodero: -
Note: Fermo di sicurezza a coltello aperto

Intended Use: Sporting / Tactical

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S45VN
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: new 2021 version with CPM-S45VN steel and Stonewashed finish

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening system

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: ful tang in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 58mm.
Blade thickness: 4.7mm.
Total length: 160mm.
Weight: 93g.
Sheath: in Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dirk Hofmeister - reversible clip integrated into the knife

In 1947, Mikhail Kalashnikov presented the AK-47 assault rifle he had designed to the Red Army and immediately convinced the decision-making bodies of its development. Only two years later, the now famous AK-47 was officially put into service as the "7.62 mm Awtomat Kalasshnikova obraztsa 1947". Even then, the simple and reliable design with a gas-pressure magazine with a swivel-head breech, the consistent use of stamped plates that could be produced quickly and cheaply, and the adherence to a class of cartridges introduced by the Wehrmacht with the StG 44 with an average performance between machine gun and rifle ammunition set the trend to this day. These characteristics have made the Kalashnikov system the most built and replicated weapon in history, with an estimated 100 million manufactured worldwide.

Introduced in 1959 along with the AKM, the revised variant of the AK-47, the bayonet was no less revolutionary and formative for later designs than the famous assault rifle itself. The concept was based on a knife originally developed by R. Todorov for combat swimmers. It marked a move away from long bayonets, which were used purely as cutting weapons, to a short, mountable knife with insulated shears and a multifunctional rear saw.

Mikhail Kalashnikov personally visited the Boker manufacture in Solingen in 2002 and officially introduced the Boker Kalashnikov knife line to the public. More than 70 years after the AK-47 entered service, we now present a truly exceptional special edition model of the knife line and once again honor its brilliant engineering achievement. The Boker Kalashnikov Bayonet Damascus features a unique Damascus steel blade, made from 6Ch3 and 6Ch4 bayonet steel according to the GRAU index of the former Soviet Army and decorated with General Kalashnikov's signature. The stainless Damascus, handcrafted by Chad Nichols, has 80 layers and is hand forged in the Virus pattern. It features an unusually intricate pattern that is the result of a very controlled forging process.

The handle is CNC machined from a block of 6061-T6 aluminum and then black anodized. The stabilized inlays are made of domestic hornbeam wood, reminiscent of the wood in the stock of the famous assault rifle, and together they form the shape of the characteristic vents on the fore-end. The Russian amber shellac color of the original stocks has been accurately reproduced. They are also CNC milled from solid and inserted by hand. All screws and clip are also black anodized. Made in the Boker knife factory in Solingen, it is delivered with transparent floating display, certificate of authenticity and individual serial number.

Intended Use: Collection

Type of production: Semi - Industrial
Country of Production: Germany - Solingen
Blade: 80 ply stainless damask steel, handcrafted by Chad Nichols, from former Soviet Army 6Ch3 and 6Ch4 bayonets
Handle: aluminum 6061-T6 and hornbeam wood
Blade length: 96mm.
Blade thickness: 3.8mm.
Total length: 228mm.
Weight: 158g.
Clip: removable, PVD stainless steel.
Closure: Liner Lock
Package: PVC expositive case that let the knife "float" inside, making it visible from every side
Notes: Certificate of Guarantee - Grey cotton case - Numbered piece on the blade

Designation of use: Utility

Production type: Industrial
Country of Production: China
Blade: ful tang in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 106mm.
Blade thickness: 4.7mm.
Total length: 215mm.
Weight: 181g.
Scabbard: Kydex, with Tek-Lok type fitting
Packaging: Cardboard box with Boker Plus logos.
Notes: Design by Midgards Messer

DMP is a multi-role knife characterized by a strong versatility of use thanks to the small dimensions. The blade, drop point shape with reinforced tip, is particularly useful for heavy duty use. The full flat rounding gives excellent cutting characteristics.

The sheath is minimalist, stripped of most of the fabric adopting a retention system of 2nd level, going to recall the style of the model to which it is inspired. The main shell is made by injection in shockproof nylon. The secondary retention system is reversible for the ambidextrous portability of the knife.

Intended Use: Tactical / Multi-role

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Stone Washed
Handle: Forprene
Blade length: 152mm.
Blade thickness: 6.3mm.
Total length: 282mm.
Weight: 283g.
Scabbard: Nylon
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -

DMP is a multi-role knife characterized by a strong versatility of use thanks to the small dimensions. The blade, drop point shape with reinforced tip, is particularly useful for heavy duty use. The full flat rounding gives excellent cutting characteristics.

The sheath is minimalist, stripped of most of the fabric adopting a retention system of 2nd level, going to recall the style of the model to which it is inspired. The main shell is made by injection in shockproof nylon. The secondary retention system is reversible for the ambidextrous portability of the knife.

Intended Use: Tactical / Multi-role

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Stone Washed
Handle: Forprene
Blade length: 152mm.
Blade thickness: 6.3mm.
Total length: 282mm.
Weight: 283g.
Scabbard: Nylon
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -

DMP is a multi-role knife characterized by a strong versatility of use thanks to the small dimensions. The blade, drop point shape with reinforced tip, is particularly useful for heavy duty use. The full flat rounding gives excellent cutting characteristics.

The sheath is minimalist, stripped of most of the fabric adopting a retention system of 2nd level, going to recall the style of the model to which it is inspired. The main shell is made by injection in shockproof nylon. The secondary retention system is reversible for the ambidextrous portability of the knife.

Intended Use: Tactical / Multi-role

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Stone Washed
Handle: Forprene
Blade length: 152mm.
Blade thickness: 6.3mm.
Total length: 282mm.
Weight: 283g.
Scabbard: Nylon
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -

The KA-BAR 1313SF Space-Bar Knife USSF is the new legendary fixed knife produced for the United States Space Force. A unit of the United States Army working in space, founded in 2019. No, this is not the pilot episode of a new TV series, this is real!

This 131SF version is acaracterized by a light blue Kraton handle. A rubber-like material that offers great grip regardless of the circumstances. The 1313SF comes with a solid thermoplastic scabbard. Ready to go to Infinity and beyond!

Intended use: military / collection

Production type: industrial
Country of manufacture: USA
Blade: carbon steel 1095 56/58HRC
Blade finish: powder coated
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 300mm.
Balance: set back 1.5cm.
Weight: 300g.
Sheath: thermoplastic, belt.
Notes: knife made for USSF

Intended Use: Sporty/EDC

Production Type: Industrial
Country of Production: USA
Blade: Steel CPM-S30V 58/60HRC
Blade Finish: Satin finish
Handle: Aluminum 6061-T6 with green anodization and purple anodized spacers
Blade Length: 74mm.
Blade thickness: 2.7mm.
Length closed: 97.5mm.
Total length: 172mm.
Thickness when closed: 10mm.
Weight: 57g.
Closure: AXIS Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Design by Warren Osborne

Intended Use: Sporting / Tactical

Production Type: Industrial
Country of Production: China
Blade: Stainless steel 12C27 Sandvik
Blade treatment: Black Oxide
Handle: Stainless steel 2CR13 with nitriding in Bronze
Blade Length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 108g.
Opening: Carson Flipper system
Closure: Frame Lock
Clip: Multi-position, removable, in Black Oxide stainless steel
Package: Cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening system

Intended Use: Tactical / CQC

Production type: Industrial
Country of Production: Italy
Blade: Full tang, stainless steel Niolox at 59/61HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total lenght: 215mm.
Weight: 165g.
Sheath: ABS, with removable loops for horizontal carrying.
Package: Cardboard box with Fox logos
Notes: Design by Black Rock Knives - Possibility of icepick grip using the karambit ring on the tang.

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Acid Stone Washed
Handle: Acid Stone Washed Titanium with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 110g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: wire, AISI 302 stainless steel, removable and reversible
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Satin
Handle: Carbon Fiber with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 60g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: wire, AISI 302 stainless steel, removable and reversible
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system

Intended use: Sports / Tactical

Type of production: Industrial
Production Lama: Taiwan
Blade: CTS-XHP 60 / 61HRC stainless steel
Blade treatment: Satin finish
Handle: G10
Blade length: 88mm.
Blade thickness: 3mm.
Closed length: 157mm.
Total length: 230mm.
Thick when closed: 10mm.
Balancing: -
Weight: 145g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

*** ATTENTION: PAYMENT FOR THIS ITEM CANNOT BE MADE WITH PAYPAL ***

Intended use: sports / collection

Type of production: Industrial
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: satin
Handle: Billet Titanium machined from solid and numerically controlled
Blade length: 112mm.
Blade thickness: 3.1mm.
Closed length: 139mm.
Total length: 254mm.
Weight: 149g.
Closure: Magnetic T-latch
Clip: -
Sheath: Black nylon
Packaging: Cardboard box with Benchmade logos
Note: -