Military Knives for Tactical Use: High-Quality Military Knives for Sale

Official reproduction, made under film license by Hollywood Collectibles, of the knife used in the film "Rambo III". This model features a signature on the blade of John Rambo and is a limited edition.

Intended use: Survival/Collection

Blade: 420J2 stainless steel
Country of production China
Handle: in wood, with stainless steel guard and knob
Blade length: 320mm.
Blade thickness: 5.5mm.
Total length: 455mm.
Balancing: advanced
Weight: 922g.
Sheath: leather
Notes: Official reproduction under cinematographic license
Limited Edition: blade and scabbard signed "John Rambo", limited and numbered edition made in 10,000 copies

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Full set, NOS (new old stock / stock fund).
* Condition: Brand new, never taken out of wooden box.
* Commercially available: Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Iconic knife produced by Puma and dating back to the late 1980s, featuring a then very modern line and a steel that was very advanced for the time (154CM). 

Intended Use: Collection / Vintage / Tactical

Type of production: Semi-industrial
Country of Production: Germany
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: integral, stainless steel and Brazilian Jacaranda wood
Blade length: 165mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 320g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - NOS (new old stock) - Brand new

The Fox FX-654 CR Billao fixed-blade knife represents a contemporary reinterpretation of an iconic historical creation, a tribute to the famous "Billato" model employed by Italian Africa Police (PAI) personnel between the 1930s and 1940s. Fox Knives has put considerable effort into designing and making the Billao knife, keeping the original appeal of the design intact while at the same time taking advantage of the latest discoveries in materials science and current manufacturing technologies to improve its strength, quality and durability.

Intended Use: Collection

Type of production: Industrial
Country of production: Italy
Blade: full tang in N690Co 58/60HRC stainless steel - single edge
Blade treatment: Satin finish
Handle: Buffalo horn
Blade length: 190mm.
Blade thickness: 5mm.
Total length: 310mm.
Weight: 355g.
Sheath: leather
Packaging: cardboard display case with knife presentation and historical notes
Notes: commemorative reproduction of the "Billato" model, used by personnel of the Police of Italian Africa (PAI) between the 1930s and 1940s.

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While retaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Dark Stone Washed
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While maintaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: satin finish
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

We are proud to present a true gem in the world of knives: the exclusive Wander Tactical model, Mistral XL. This extraordinary edition is distinguished by its elegance and refinement, with a Raw Finish blade treatment that captures the essence of craftsmanship, coupled with a G10 desert handle, which not only offers a high-end aesthetic but also ensures a solid and comfortable grip.

This production is extremely limited and unique, made in only 4 separate pieces, making each one a collector's item with collector's value. The knife we present here is number 3 in this exclusive series, as confirmed by the certificate of authenticity.

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Raw
Handle: G10 Desert
Blade length: 160mm.
Blade thickness: 5mm.
Total length: 310mm.
Balance: set back about 2cm. from the guard branch
Weight: 419g.
Sheath: made of Kydex, thermoformed, with MOLLE-compatible belt loop
Packaging: accompanied by polypropylene case 
Notes: limited series of four pieces different from each other, specimen #3 of #4

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

Machai - A fitting name for this large cutting tool. In Greek mythology, the Machai were the demons (spirits) of battle and combat.

The high weight and recurved profile of this flat ground blade make it an excellent hatchet. The Machai has a full-tang construction and a handle that ensures a forward balance in the user's hand.

The textured Micarta canvas ergonomic handle ensures a secure and comfortable grip, whether wet or dry. Made by the good people at KA-BAR Knives; in Olean, NY, USA.

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 165mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Weight: 308g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito - The Professional Grade series with a Silver-colored box identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in USA production.

Intended Use: Tactical / Military 

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Black Idroglider
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 97g.
Sheath: kydex, with double Ulti-Clip attachment system
Packaging: cardboard box with Fox logos
Notes: Design by Doug Marcaida

The Boker Plus Accomplice by John Gray is a very compact and handy EDC or reserve knife, which with its slim handle and the typical karambit ring at the end of the handle combines a high level of user comfort with the discretion of an excellent hand position. It can also be carried as a large neck knife. The G10 handles feature a textured groove and are fully contoured, so that the Accomplice virtually nestles in the hand. The blade is made of D2 and features a satin finish. Comes with customised Kydex sheath and large belt adapter.

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: China
Blade: Full tang, D2 steel
Blade finish: Satin finish
Handle: G10
Blade length: 82mm.
Blade thickness: 4.1mm.
Total length: 111mm.
Weight: 111g.
Sheath: in kydex, with Tek-Lok type multi-position attachment
Packaging: Cardboard box with Boker Plus logos
Notes: Design by John Gray

The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. It's light enough to carry around without hassle, yet sturdy enough to handle a range of everyday tasks. The tip profile is flat with a tapered upper edge ensuring excellent cutting with good penetrating force. The full tang and grip of the Moros provide a neutral balance, making it light in the hand. The ergonomic and textured Micarta canvas grip ensures a comfortable and secure grip whether dry or wet.

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had been designing and drawing knives for friends in special forces for years, and Mark, who had always dealt with military and tactical equipment while working in the "Green Berets," decided to combine their skills and passion with the goal of building innovative and functional knives using high-quality materials and entirely made in the United States.

Intended use: Tactical/Military

Type of production: Mid Tech
Country of production: USA
Blade: in CPM-S45VN stainless steel 59/61HRC
Blade finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed in Kydex
Packaging: Cardboard box with Spartan Blades logos

The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. Light enough to carry without bothering, yet strong enough to handle a variety of daily tasks. The tip profile is flat with a tapered top edge that provides an excellent cut with good penetration force. The Moros' solid tang and handle provide neutral balance, making it light in the hand. The ergonomic, textured Micarta canvas handle provides a comfortable and secure grip when dry or wet.

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed Kydex.
Packaging: cardboard box with Spartan Blades logos
Notes: Design by Curtis Iovito

To commemorate in our own way the 50th anniversary of the death of our great-grandfather Giuseppe Maserin known as "Belu" (1885 - 1972), an Alpine soldier of the 4th Battalion Cadore Regiment and Cav. of Vittorio Veneto, we wanted to make a dagger in the manner of the "Arditi", that is, inspired by those handcrafted daggers that were made from the former bayonets of the Carcano 91 rifles. Specifically, we were inspired by the shape of the bayonet that was made at the CO.RI.CA.MA factory in Maniago.

We called it BeluM joining the M of our surname to 'Belu', thus obtaining a reference to the Latin word 'bellum'. It is a project of clear historical inspiration, but realised with modern machinery, technology and materials. The stenciled wooden box deliberately recalls the features of the crates in which war material was once stored.

BeluM is dedicated to our great-grandfather Giuseppe and all the heroes who sacrificed their lives for their country in any way.

Intended Use: Commemorative / Historical / Military 

Type of production: Industrial
Country of Production: Italy
Blade: Full tang in N690Co stainless steel 
Blade treatment: Satin finish
Handle: Paosantos wood; AIS 420 stainless steel guard; AISI 316 stainless steel pommel forged from solid
Blade length: 202mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 340g.
Sheath: leather
Packaging: wooden box with stencil logos
Notes: Design by Bonus Design

Intended Use: Sporting / Light Utility

Production type: Industrial
Country of Production: China
Blade: full tang, D2 steel
Blade finish: TPFE
Handle: Micarta and Copper
Blade length: 76mm.
Blade thickness: 3.7mm.
Total length: 155mm.
Weight: 103g.
Sheath: kydex, with Tek-Lok type multi-position attachment
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jesper Voxnaes

Intended Use: Neck / EDC / Sporting

Production type: Industrial
Country of Production: China
Blade: full tang, D2 steel
Blade finish: TPFE
Handle: Micarta and Copper
Blade length: 55mm.
Blade thickness: 3.5mm.
Total length: 98mm.
Weight: 48g.
Sheath: kydex, neck, with chain
Packaging: Cardboard box with Boker Plus logos
Notes: Design by Jesper Voxnaes

Intended Use: Outdoor / Bushcraft / Light Utility

Production type: Industrial
Country of Production: Taiwan
Blade: hidden tang made of Sandvik 12C27 stainless steel
Blade Finish: Titanium coating
Handle: Injection molded polymers (brown TPR and black GRP)
Blade length: 115mm.
Blade thickness: 4.2mm.
Total length: 242mm.
Weight: 210g.
Sheath: polymer and Nylon
Packaging: cardboard box with Boker Plus logos
Notes: -

The knife echoes one that Fox Knives created at the request of GIS, Gruppo di Intervento Speciale dell'Arma dei Carabinieri, Italian special forces. The design of Veleno stems from a reinterpretation of the ceremonial dagger made more appealing thanks to the materials: blade in N690 steel with Top Shield® finish and aluminum handle finished in black color that recalls the color that distinguishes the weapon group.


Intended Use: Tactical / Collection

Production Type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co
Blade treatment: Black Top Shield
Handle: Aluminum
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 223g.
Sheath: handmade, vegetable-tanned Tuscan leather
Packaging: cardboard box with Fox logos
Notes: numbered on box and on blade

Intended Use: Tactical / Military 

Type of production: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 120g.
Sheath: kydex, with Tek-Lok-like attachment 
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)

Intended Use: Tactical / Military 

Production type: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 130g.
Sheath: kydex, with Tek-Lok-like attachment 
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)

Original and official reproduction under film license of the knife used in the Rambo film - Last Blood

Intended use: Survival/Collection
Blade: 420 stainless steel.
Handle: synthetic
Blade length: 200mm.
Blade thickness: 5.5mm.
Total length: 360mm.
Balancing: advanced
Weight: 650.
Sheath: in leather
Notes: Standard Edition - Official product with Lionsgate cinema licenses

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: full tang, stainless steel Elmax 60/62 HRC
Blade treatment: Black Top Shield
Handle: G-10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 140mm.
Weight: 60g.
Sheath: made of Kydex, with Ulti-Clip attachment
Packaging: cardboard box with Fox logos
Notes: Design by Denis Simonutti

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: full tang, stainless steel Elmax 60/62 HRC
Blade treatment: Black Top Shield
Handle: G-10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 140mm.
Weight: 65g.
Sheath: made of Kydex, with Ulti-Clip attachment
Packaging: cardboard box with Fox logos
Notes: Design by Denis Simonutti

Surgical precision, a clean cut, and a sense of pride in what you've achieved: the Böker Plus scalpel knife by Alexander Krava provides the dexterity needed for everyday, delicate cutting tasks. The compact all-steel construction in D2 is modeled on a scalpel but convinces as an absolutely practical neck knife.

The bulbous blade has a satin finish and cuts through cardboard boxes with equal concentration and effortlessness, and steps in for crafts where scissors can go no further. Epoxy handle inserts and serrations on the wrist rest increase control while working. Supplied with a black ball chain and custom-made Kydex sheath.

Intended Use: Tactical / CQB 

Production type: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 42mm.
Blade thickness: 2.6mm.
Total length: 125mm.
Balance: -
Weight: 14g.
Sheath: Neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Design Alexander Krava

Extrema Ratio S-THIL STONE WASHED is a tactical backup knife with monolithic construction machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with Thilo designer Arnd Schiller.

The blade, a spear point type, is hardened to 58 HRC in order to achieve the best balance of edge retention and strength, features a false counterbore at the top that enhances penetration and point work characteristics, and has a full-length groove (fuller) that flows elegantly from the blade to the handle. The blade is milled integrally to the knife to enhance its compactness and lightness, maintaining a minimal thickness while still having a profile reminiscent of the classic Extrema Ratio handle.

That profile goes to form two small guards and a comfortable thumb rest to prevent the hand from slipping towards the blade. On the end are a skull crusher with a diamond-shaped tip and a slot that allows a wrist strap to be attached to the knife or the handle to be fitted with paracord coiling.

The molded nylon sheath is designed to be extremely flat with very small side dimensions to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the blade cutting edge to the right or left. The double retention system integral to the sheath consists of four pressure elements that work only two at a time, depending on right/left-handed use, while the nylon textile part has a button that allows the knife to be secured to the sheath.

The end of the sheath has a hole to expel liquids or debris inside. The ability to attach belt clip, ulticlip, malice clip makes it extremely versatile. You can also attach the sheath to the M.O.L.L.E. system by braiding the paracord.


Intended Use: Tactical/Multi-role

Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Stonewashed
Handle: Steel N690Co 58HRC
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: Nylon
Packaging: cardboard box with Extrema Ratio logos
Notes: -

The product is an elaboration of the Japanese Wakizashi sword, a typical blade 30 to 60 centimeters long, which the Samurai carried at all times in contact with the body, where the Katana was carried exclusively in battle. The blade produced from Boehler N690 steel is hardened to 58HRC while the handle is made of forprene, an elastomer that falls under the "NATO standard" for resistance to extreme conditions. The Waki Black comes with a cordura, military-derived scabbard that ensures safe carrying of the razor-sharp blade and its protection from shocks that could reduce its efficiency. The scabbard is also equipped with the MOLLE system that allows it to be carried on tactical vests and general belts.

Intended Use: Tactical/Machete

Type of production: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co at 58HRC
Blade Treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade Length: 297mm.
Blade thickness: 6.5mm. tapering to 4mm from the handle.
Total length: 456mm.
Weight: 384g.
Sheath: cordura, compatible with M.O.L.L.E. systems.
Packaging: cardboard box with Extrema Ratio logos
Notes: -

Less size, less weight, more action! That's the motto of the Boker Plus Micro Tracker 2.0. This updated version features a full tang blade, supported by sturdy screws. The blade, made of powder-coated 1095 carbon steel is designed for uncompromising outdoor use, just like its big brothers! Supplied with belt adapter and custom Kydex sheath.

Intended Use: Utility

Production type: Industrial
Country of manufacture: China
Blade: ful tang in 1095 steel
Blade finish: powder coating
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 159g.
Sheath: Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dave Wenger

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: SK-5 carbon steel
Blade finish: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 241mm.
Balance: backward
Weight: 142g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

The CUMA Tak-Ri 3.5 is not your typical kukri. In fact, you have to understand what a Gurkha Kukri is to see the curve of its blade. The kukri (Devnagari/ खुकुरी), originally spelled khukri or khukuri, is a Nepalese curved knife. It is a traditional weapon of the Nepali people and also a weapon of choice/side arm for all Nepalis, including those serving in various armies around the world, but with the CUMA Tak-Ri we have gone further!

Once you have the CUMA Tak-Ri in your hands, you will quickly realize that it is "tough to the core." In fact, the Tak-Ri caused such a stir at the 2011 SHOT Show that Lou Ferrigno (the historic "Incredible Hulk") pre-ordered his directly at the TOPS Knives booth.

Intended Use: Hard Utility / Tactical

Type of Production: Semi-Industrial
Country of Manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Coyote Tan Coatung
Handle: Canvas Micarta
Blade Length: 178mm.
Blade thickness: 4.9mm.
Total length: 343mm.
Weight: 460g.
Scabbard: Nylon, belt-mounted, M.O.L.L.E. compatible.
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by certificate of guarantee and authenticity

Selvans Expeditions, as well as the Selvans model from which it derives, was born from the collaboration between Extrema Ratio and the Master instructor F.I.S.S. (Federazione Italiana Survival Sportivo e Sperimentale) Daniele Dal Canto. This tool is the result of the modification of the ONTOS, military survival knife, realized in order to accentuate and maximize the performance of the knife.

Selvans Expeditions uses Böhler N690 steel heat treated to 58 HRC with MIL-C-13924 burnishing and stone washed surface treatment (Dark Stone finish). The handle has been lengthened and the blade weighted to promote effective cutting strokes. It comes with a desert Cordura sheath with MOLLE system, equipped with a mini pouch containing paracord with flammable filament that can be used in case of emergency and/or critical weather conditions and a Firesteel for lighting fires.

The survival kit (not included and purchasable separately) has been optimized and includes whistle, chainsaw, drinking pads, compass, brass wire, flintlock, flashlight, paracord 2,5 mt. and sharpener.

Intended use: Survival / Heavy Utility

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924 with Dark Stone finish
Handle: Forprene
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 312mm.
Balance: Advanced
Weight: 430g.
Sheath: Cordura, M.O.L.L.E. compatible.
Package: Cardboard box with Extrema Ratio logos
Notes: Designed and developed thanks to the collaboration with the instructor Daniele del Canto of F.I.S.S.S. (Federazione Italiana Survival Spotivo e Sperimentale).

Kreios Expeditions, as well as the Kreios model from which it derives, has been designed and developed thanks to the collaboration with the Master instructor F.I.S.S. (Federazione Italiana Survival Sportivo e Sperimentale) Daniele Dal Canto. It is defined by its creator as a sort of "off the road" of cutting tools, therefore not a specific disposable tool, but a multi-tasking tool, extremely versatile and designed to cope with many uses.

Thanks to its ergonomics, weight and size, Kreios Expeditions is suitable to open gaps in the thick vegetation, especially where it is necessary to take distance, for safety reasons, from thorny or harmful essences. Thanks to its robustness, it is an effective machete even in the heaviest field work. Combining the 32 cm of the "full flat" cutting edge, the 11° forward inclination of the blade and the 630 gr. of its weight, you get a tool with extraordinary cutting capabilities that does not fear bending.

Kreios Expeditions brings modern geometry and materials combined with the lines and effectiveness of blades typical of the Malaysian and African tradition, creating an ideal tool for field work but also, if necessary, for defense/offense. Kreios Expeditions is equipped with a desert color forprene handle and a BÖHLER N690 (58HRC) steel blade with MIL-C-13924 burnishing and stone washed surface finish (Dark Stone finish). It is supplied with a desert Cordura sheath with MOLLE system and strap for safety carry, equipped with a mini pouch containing paracord with flammable filament to be used in case of emergency and/or critical weather conditions and a Firesteel for lighting fires.

Intended Use: Chopper / Machete / Heavy Utility

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade Finish: Burnishing MIL-C-13924 with Dark Stone finish
Handle: Forprene
Blade Length: 324mm.
Blade thickness: 6.3mm.
Total length: 476mm.
Weight: 642g.
Sheath: Cordura, M.O.L.L.E. compatible.
Package: Cardboard box with Extrema Ratio logos.
Notes: Designed and developed thanks to the collaboration with the instructor Daniele del Canto of F.I.S.S.S. (Federazione Italiana Survival Spotivo e Sperimentale).

Satre is a small, light and extremely resistant fixed blade knife. Given its characteristics, it is used in a wide range of disciplines and uses ranging from survival activity, bushcraft or as an element of an EDC (Every Day Carry) kit.

It was designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S.S. (Italian Federation of Sports and Experimental Survival).

In Neck Knife mode, through the use of a paracord 550 cord, it is possible to keep it around the neck by keeping the knife vertically with the handle facing downwards. The metal eyelets on the sheath made of pre-shaped Kydex allow the application of both the lanyard and the accessory holder.

The full-tang skeletonized structure allows you to customize the knife using paracord as a coating for the handle

This Black version uses the Böhler N690 heat treated at 58 HRC. This material is chosen for its resistance to oxidation, the durability of the wire and above all the reliability it has shown over the years.

Intended use: Neck / Hiking / Utility Knife

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black
Handle: stainless steel N690Co 58 / 60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78 g.
Sheath: in Kydex, for neck
Packaging: Cardboard box with Extrema Ratio logos
Note: possibility to use the sheath with Ulti-Clip systems, M.O.L.L.E. o Tek-Lok (available separately)

Intended Use: Tactical/Military/Survival

Type of production: semi industrial
Blade: full tang in carbon steel 1095 58HRC
Blade finishing: Camouflage
Handle: Micarta
Blade length: 260mm.
Blade thickness: 6mm.
Total length: 425mm.
Balance: Advanced
Weight: 735g.
Sheath: Nylon
Notes: Design By Xtreme Survivalist & Adventurer EJ Snyder.

The Boker Plus Kazhan is designed by Alexander Krava and is a practical neck knife with a short Sheepfood-shaped blade, practical and light, ideal as a back-up tool. The young cutler from Lviv, Ukraine places particular emphasis on the aesthetics of his models, which convince not only as reliable tools but also as high-quality accessories. The skeletonized Kazhan is made of D2 with a dark stonewash finish. Supplied with chain and custom Kydex sheath.

Intended use: Tactical / CQB

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 56mm.
Blade thickness: 4mm.
Total length: 140mm.
Balancing: -
Weight: 62g.
Sheath: For neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Alexander Krava design

Original and official reproduction under movie license of the knife used in the movie Rambo - Last Blood

Intended use: Collection

Production type: Industrial
Country of Production: China
Blade: Full tang stainless steel 7Cr17MoV
Blade treatment: Dual Tone
Handle: G10
Blade length: 229mm.
Blade thickness: 5.5mm.
Total length: 381mm.
Balance: Advanced
Weight: 800g.
Scabbard: leather
Package: Cardboard box with Rambo Last Blood logos
Notes: Original and official product, with Lionsgate movie licenses

Intended use: Utility / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58 / 60HRC stainless steel with stonewash finish
Handle: Black Canvas Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: advanced to 1cm
Weight: 190g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -

Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.

In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.

The full-tang skeleton structure allows to personalize the knife using the Paracord as a coating for the handle.

The Black S600 version uses Böhler S600 steel. This steel is used in industrial manufacturing to make metalworking tools and in mold making.

The high content of Molybdenum, Tungsten and a good presence of Vanadium in its chemical composition, give it excellent qualities of hardness, wear resistance and toughness. The presence of Cobalt favors the formation of small carbides uniformly distributed, a characteristic that enhances and elevates wear resistance.

Satre S600 is hardened and cryogenically treated, thus reaching an exceptional hardness of 64 HRC. This gives it great wear resistance and the ability to guarantee the cutting edge of the wire for a long time.

Böhler S600 has 4.5% Chromium, which makes it a carbon steel and therefore can cause rust and oxidation if neglected. To better protect it from atmospheric agents, we have chosen the new external coating EXP DARK.

The high hardness and resistance to wear and abrasion, make this steel not easy to sharpen.

Intended Use: Neck Knife / Hiking / Utility

Production type: industrial
Country of production: Italy
Blade: Carbon steel Bohler S600 64HRC
Blade treatment: Black EXP DARK
Handle:in carbon steel Bohler S600 64HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).

Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.

In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.

The full-tang skeleton structure, allows to personalize the knife using the Paracord as a coating for the handle.

The Stone Washed version uses Böhler N690 heat treated to 58 HRC. This material is chosen for its ability to resist oxidation, the durability of the edge and above all the reliability it has shown over the years.

Intended Use: Neck Knife / Hiking / Utility

Type of production: industrial
Country of production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade Treatment: Stone Washed
Handle: Stainless steel N690Co 58/60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total lenght: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).

Intended use: Tactical / Hiking

Type of production: industrial
Blade: full tang, 420HC stainless steel
Blade Treatment: Ceramic Coating
Blade production: USA
Handle: fiberglass and nylon with non-slip rubberized polymers
Blade length: 122mm.
Blade thickness: 5mm.
Total lenght: 248mm.
Balance: set back 1cm.
Weight: 204g.
Scabbard: Nylon and polymer, multi-position and MOLLE compatible.
Notes: Rear skullcrasher that integrates the hole for the wrist strap.

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: ful tang in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 58mm.
Blade thickness: 4.7mm.
Total length: 160mm.
Weight: 93g.
Sheath: in Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dirk Hofmeister - reversible clip integrated into the knife

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: SK-5 steel ful tang
Blade finish: Black PVD
Handle: Micarta
Blade length: 104mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 200g.
Sheath: in Kydex with Tek-Lok type attachment
Packaging: cardboard box with Boker Plus logos
Notes: design by James Helm

For SOG's 20th anniversary in 2006, a new adaptation of the original SOG Bowie, one of the company's signature knives, was released. This oversized blade knife will amaze you with its precise and aesthetically accurate construction to that of the 1980s. Unlike the original, all parts are protected by a black TiNi coating to give the knife a more aggressive look and better performance.

Intended use: collection / tactical / military / vintage

Type of production: industrial
Blade: AUS-8 stainless steel
Blade finish: titanium nitriding
Handle: Leather rings
Blade length: 190mm.
Blade thickness: 6.5mm.
Total length: 326mm.
Balance: backward
Weight: 485g.
Scabbard: leather
Notes: -

Intended use: Tactical / emergency belt cutter

Production type: Industrial
Country of production: USA
Blade: Stainless steel 440C
Blade treatment: Teflon coated
Handle: 440C stainless steel
Blade thickness: 3mm.
Length closed: -
Total length: 166mm.
Weight: 51g. (77g. including scabbard)
Closure: -
Scabbard: Boltaron, M.O.L.L.E. compatible, ambidextrous
Packaging: Cardboard box with Benchmade logos
Notes: -

Destinazione d'uso: Utility

Tipo di produzione: Industriale
Paese di produzione: Cina
Lama: ful tang in acciaio D2
Finitura lama: Black PVD
Manicatura: G10
Lunghezza lama: 80mm.
Spessore lama: 5.7mm.
Lunghezza totale: 166mm.
Peso: 157g.
Fodero: in Kydex, con aggancio multiposizione
Confezione: scatola di cartone con loghi Boker Plus
Note: -

Intended Use: Outdoor / Light Utility

Production type: Industrial
Country of Production: China
Blade: D2 steel ful tang
Blade finish: Stonewashed
Handle: Micarta with copper rivets
Blade length: 70mm.
Blade thickness: 2.9mm.
Total length: 155mm.
Weight: 85g.
Sheath: leather
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jesper Voxnaes.

Designation of use: Utility

Production type: Industrial
Country of Production: China
Blade: ful tang in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 106mm.
Blade thickness: 4.7mm.
Total length: 215mm.
Weight: 181g.
Scabbard: Kydex, with Tek-Lok type fitting
Packaging: Cardboard box with Boker Plus logos.
Notes: Design by Midgards Messer

DMP is a multi-role knife characterized by a strong versatility of use thanks to the small dimensions. The drop point blade with reinforced tip is particularly useful for heavy duty use. The full flat rounding gives excellent cutting characteristics.

The sheath is minimalist, stripped of most of the fabric adopting a retention system of 2nd level, going to recall the style of the model to which it is inspired. The main shell is made by injection in shockproof nylon. The secondary retention system is reversible for the ambidextrous portability of the knife.

Intended Use: Tactical / Multi-role

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade length: 152mm.
Blade thickness: 6.3mm.
Total length: 282mm.
Weight: 283g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -

DMP is a multi-role knife characterized by a strong versatility of use thanks to the small dimensions. The blade, drop point shape with reinforced tip, is particularly useful for heavy duty use. The full flat rounding gives excellent cutting characteristics.

The sheath is minimalist, stripped of most of the fabric adopting a retention system of 2nd level, going to recall the style of the model to which it is inspired. The main shell is made by injection in shockproof nylon. The secondary retention system is reversible for the ambidextrous portability of the knife.

Intended Use: Tactical / Multi-role

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Stone Washed
Handle: Forprene
Blade length: 152mm.
Blade thickness: 6.3mm.
Total length: 282mm.
Weight: 283g.
Scabbard: Nylon
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -

DMP is a multi-role knife characterized by a strong versatility of use thanks to the small dimensions. The blade, drop point shape with reinforced tip, is particularly useful for heavy duty use. The full flat rounding gives excellent cutting characteristics.

The sheath is minimalist, stripped of most of the fabric adopting a retention system of 2nd level, going to recall the style of the model to which it is inspired. The main shell is made by injection in shockproof nylon. The secondary retention system is reversible for the ambidextrous portability of the knife.

Intended Use: Tactical / Multi-role

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Stone Washed
Handle: Forprene
Blade length: 152mm.
Blade thickness: 6.3mm.
Total length: 282mm.
Weight: 283g.
Scabbard: Nylon
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -

DMP is a multi-role knife characterized by a strong versatility of use thanks to the small dimensions. The blade, drop point shape with reinforced tip, is particularly useful for heavy duty use. The full flat rounding gives excellent cutting characteristics.

The sheath is minimalist, stripped of most of the fabric adopting a retention system of 2nd level, going to recall the style of the model to which it is inspired. The main shell is made by injection in shockproof nylon. The secondary retention system is reversible for the ambidextrous portability of the knife.

Intended Use: Tactical / Multi-role

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Stone Washed
Handle: Forprene
Blade length: 152mm.
Blade thickness: 6.3mm.
Total length: 282mm.
Weight: 283g.
Scabbard: Nylon
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -

Intended use: tactical / emergency belt cutter

Type of production: Industrial
Country of production: USA
Blade: 440C stainless steel
Blade treatment: Teflon coated
Handle: 440C stainless steel
Blade thickness: 3mm.
Closed Length: -
Total length: 110mm.
Weight: 43g.
Closing: -
Sheath: in Boltaron, M.O.L.L.E. compatible, ambidextrous
Packaging: Cardboard box with Benchmade logos
Note: -

Intended Use: Utility

Production type: Industrial
Country of Production: China
Blade: D2 steel ful tang
Blade finishing: Black PVD
Handle: G10
Blade length: 80mm.
Blade thickness: 5.7mm.
Total lenght: 166mm.
Weight: 157g.
Sheath: Kydex sheath with Tek-Lok attachment.
Package: cardboard box with Boker Plus logos
Notes: -

Intended use: Tactical / EDC

Production type: industrial
Country of Production: Taiwan
Blade: full tang in stainless steel AUS-8 57/59HRC
Blade finish: Powder coated
Handle: Zytel
Blade Length: 48mm.
Blade thickness: 2mm.
Total length: 121mm.
Weight: 68g.
Sheath: ABS with clip
Notes: -

The KA-BAR 1313SF Space-Bar Knife USSF is the new legendary fixed knife produced for the United States Space Force. A unit of the United States Army working in space, founded in 2019. No, this is not the pilot episode of a new TV series, this is real!

This 131SF version is acaracterized by a light blue Kraton handle. A rubber-like material that offers great grip regardless of the circumstances. The 1313SF comes with a solid thermoplastic scabbard. Ready to go to Infinity and beyond!

Intended use: military / collection

Production type: industrial
Country of manufacture: USA
Blade: carbon steel 1095 56/58HRC
Blade finish: powder coated
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 300mm.
Balance: set back 1.5cm.
Weight: 300g.
Sheath: thermoplastic, belt.
Notes: knife made for USSF

Production type: Industrial

Country of Production: USA
Blade: Stainless steel 440C
Blade treatment: Black Traction Coating
Handle: Stainless steel 440C
Blade Length: 56mm.
Blade thickness: 4.45mm.
Total length: 158mm.
Weight: 85g.
Scabbard: polymer, with clip attachment
Packaging: cardboard box with Benchmade logos
Notes: Design by Greg Thompson

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: China
Blade: Full tang in 2Cr13 stainless steel
Blade finish: Dual Tone: satin with black finishing
Handle: FRN (Fiberglass and Nylon)
Blade length: 158mm.
Blade thickness: 8mm.
Total length: 286mm.
Weight: 760g.
Sheath: Belt, for vertical carrying, made of polymer (Vortec) and nylon.
Package: Cardboard box with United Cutlery logos.
Notes: -

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: Full tang, Niolox stainless steel at 59/61HRC
Blade treatment: Black Stonewashed
Handle: G-10
Blade length: 135mm.
Blade thickness: 5mm.
Total lenght: 270mm.
Weight: 225g.
Scabbard: Kydex, with Tek-Lok type fitting
Package: Cardboard box with Fox logos
Notes: Design by Black Rock Knives

ERMES is the commemorative knife developed in collaboration with the Special Operations Helicopter Regiment (R.E.O.S.) which is part of the Army Aviation Command.

The R.E.O.S. is the operational unit of helicopters in support of special forces composed of personnel specifically trained and equipped to support military activities in any operational context.

The stylized guards of the knife represent the wings present in the heraldic coat of arms of the unit. The steel used is the reliable Bölher N690Co heat treated to 58 HRC. Fiber Reinforced Nylon (FRN) polyamide polymer was chosen for the handle. The hybrid Kydex and fabric sheath is equipped with belt or harness attachment with MOLLE interface system.

It is available in two versions:
"ERMES SATIN ORDINANZA" with satin finish blade and ABS case.
"ERMES BLACK OPERATIVO", with the burnished blade.

Intended use: Collection / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 140mm.
Blade thickness: 6.3mm.
Total length: 256mm.
Weight: 229g.
Sheath: Kydex and Fabric with MOLLE type hooking system.
Package: Commemorative case in ABS with the logos of the department
Notes: Commemorative knife developed in collaboration with the Regiment Helicopters for Special Operations (R.E.O.S.)

ERMES is the commemorative knife developed in collaboration with the Special Operations Helicopter Regiment (R.E.O.S.) which is part of the Army Aviation Command.

The R.E.O.S. is the operational unit of helicopters in support of special forces composed of personnel specifically trained and equipped to support military activities in any operational context.

The stylized guards of the knife represent the wings present in the heraldic coat of arms of the unit. The steel used is the reliable Bölher N690Co heat treated to 58 HRC. Fiber Reinforced Nylon (FRN) polyamide polymer was chosen for the handle. The hybrid Kydex and fabric sheath is equipped with belt or harness attachment with MOLLE interface system.

It is available in two versions:
"ERMES SATIN ORDINANZAR" with satin finish blade and ABS case.
"ERMES BLACK OPERATIVO", with the burnished blade.

Intended use: Collection / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Burnishing Mil-C-13924
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 140mm.
Blade thickness: 6.3mm.
Total length: 256mm.
Weight: 229g.
Sheath: Kydex and Fabric with MOLLE type hooking system.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: Commemorative knife developed in collaboration with the Regiment Helicopters for Special Operations (R.E.O.S.)

Intended Use: Tactical / CQC

Production type: Industrial
Country of Production: Italy
Blade: Full tang, stainless steel Niolox at 59/61HRC
Blade Treatment: Black Stonewashed
Handle: G-10
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 215mm.
Weight: 165g.
Sheath: Kydex, with removable loops for horizontal carrying.
Packaging: cardboard box with Fox logos
Notes: Design by Black Rock Knives - Possibility of icepick grip using the karambit ring on the tang.

Intended Use: Tactical / CQC

Production type: Industrial
Country of Production: Italy
Blade: Full tang, stainless steel Niolox at 59/61HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total lenght: 215mm.
Weight: 165g.
Sheath: ABS, with removable loops for horizontal carrying.
Package: Cardboard box with Fox logos
Notes: Design by Black Rock Knives - Possibility of icepick grip using the karambit ring on the tang.

The Herring dagger is one of the most loved military knives by enthusiasts.

Its original name is Fairbairn Sykes or Commando Dagger and it was present in the endowment of the British Commandos.

A dagger that entered Italian history in World War II, thanks to the exploits of young soldiers of the 1st "Folgore" Reconnaissance Squadron, who were equipped with this weapon during Operation Herring. He has behind him a heroic piece of history that is rarely talked about, despite the fact that these young boys, thanks to their devotion to the cause and their courage, have written an important page in Italian history.

Extrema Ratio wanted to pay homage to this dagger trying to remain faithful to the original forms, while using the most modern production techniques.

The very special hand-made finish of the handle simulates the aging of brass and gives the dagger a dated look, similar to the original.

The dagger was developed in collaboration with the 185th RAO and adopted as a ceremonial commemorative dagger for the 20th anniversary of the regiment's establishment and the 75th anniversary of the Herring mission.

The knife is equipped with a polymer case with historical frieze of the F Squadron, leather / kydex sheath with brass tip and two commemorative scrolls.

PLEASE NOTE:
NE version, simulacrum replica with rounded tip and blunt blade, to allow free sale and possession according to the current regulations in force on the Italian territory.

We warn that any subsequent modifications and sharpening made to the blade modify the status of simulacrum of the Herring NE. In this case it will be subject to the regulations in force in the respective countries. Furthermore, these changes will void the Extrema Ratio warranty.

Intended use: Collection / Tactical

Type of production: Industrial
Country of production: Italy
Blade: not sharp, in stainless steel N690Co 58HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Aged brass
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 289mm.
Weight: 276g.
Sheath: leather, ABS and brass sheath
Packaging: Polymer case with historical frieze of Squadron F and 2 commemorative scrolls
Note: -

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

Fixed blade tactical knife designed by Alessandro Zanin.
Built without compromise modeled on the biomechanics of the hand, sculpted curves for maximum contact and absolute control, aggressive, powerful, agile and fast in hand changes.
Specialized for the most extreme uses.

Intended use: Tactical / Light Utility

Type of production: Industrial
Country of production: Italy
Blade: full tang in D2 58HRC steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 110mm.
Blade thickness: 6mm.
Total length: 250mm.
Balancing: set back
Weight: 353
Sheath: in Kydex,
Packaging: cardboard box with Maserin logos
Note:

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: Italy
Blade: full tang in Bohler K110 (D2) steel at 60 / 61HRC
Blade treatment: Blackwashed
Handle: Micarta
Blade length: 165mm.
Blade thickness: 5mm.
Total length: 287mm.
Balancing: Advanced at 1cm. from the guard branch
Weight: 351g.
Sheath: leather, belt, ambidextrous, for horizontal or vertical port
Packaging: cardboard box with Fox logos
Notes: flat chamfering with scandi-like sharpening, convex, in the rear part of the blade

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade finish: Black Tuff-Ex painting
Handle: Kray-Ex (Kraton)
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 241mm.
Balancing: backward
Weight: 142g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

Compact version of the CONTACT, the CONTACT C has a spearhead blade, in Böhler N690 steel with a hardness of 58 HRC, flat edge, lower guard branch and full-length lightening release.

The Forprene handle with locking by threaded tang makes the knife solid and well balanced.

The MOLLE compatible sheath is made of shockproof nylon with a system that avoids shaking noises, is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous 2nd level retention system: the simple pressure on the trigger unlocks the blade.

Intended use: Tactical / Backup

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: Forprene
Blade length: 128mm.
Blade thickness: 6.3mm.
Total length: 258mm.
Weight: 373g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Italy
Blade: in Becut 57 / 58HRC stainless steel with very high resistance to oxidation and corrosion
Blade Finish: Black Idroglider
Handle: G10
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 207g.
Sheath: leather, for vertical port
Packaging: Cardboard box with Fox logos
Notes: Design by Russ Kommer