bing

Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

Shop By
Shopping Options
Brand
  1. Boker 1item
  2. Extrema Ratio 1item
  3. Lion Steel 1item
  4. Spyderco 2items
  5. Approved 11items
  6. Tops Knives 1item
Less
Stock
  1. In Stock 7items
  2. Out of Stock 10items
Rating
  1. 4
    & up
    2items
Set Ascending Direction

17 Items

  1. Giant Mouse - ACE Sonoma V2 - Elmax & Green Canvas Micarta - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION

    * Type: Previously purchased and used. 
    * Condition: Very good condition, with a few small marks on blade and handle.
    * Commercially available: Discontinued
    * Sharpening: Professionally re-sharpened.
    * Marks on blade: Small, unnoticeable scratches on the tip of the blade.
    * Marks on handle: A small mark near the clip housing.
    * Packaging: Yes
    * Scabbard: /
    * Manuals, Certificates and Warranties: /
    * Checked and Certified by our in-house laboratory


    Production Type: Industrial
    Country of Production: China (by Reate Knives)
    Blade: Elmax stainless steel
    Blade finish: satin finish
    Handle: green cavnas micarta with brass spacer
    Blade length: 87mm.
    Blade thickness: 3.5mm.
    Length closed: 114mm
    Total length: 203mm.
    Thickness when closed: 14mm.
    Weight: 85g.
    Closure: Liner Lock
    Clip: flush, stainless steel, removable and reversible
    Packaging: cardboard box with Giant Mouse logos
    Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by Carryology

    GM-ACESO-CP
    €155.74
    Only 1 left
    Only 1 left
  2. William Henry - Signature Collection B12-FTD - Damascus ZDP-189 and Titanium - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Like new
    * Commercially available Out of production
    * Sharpening: Factory
    * Marks on blade: None
    * Marks on handle: some minor scuffs and hairlines on the right side
    * Box: Present
    * Scabbard: Present
    * Manuals, Certificates and Warranties: Present
    * Checked and Certified by our in-house laboratory

     

    Intended Use: Collection

    Production type: MidTech
    Country of manufacture: USA
    Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
    Blade finish: -
    Handle: titanium with blue anodized and topaz set
    Blade length: 79mm.
    Blade thickness: 2.3mm.
    Length closed: 100mm.
    Total length: 180mm.
    Weight: 57g.
    Closure: Button Lock with embedded topaz
    Sheath: leather, with stainless steel clip
    Packaging: cardboard box with William Henry logos and warranty certificate
    Notes: previously purchased knife, from a private collection

    WH-BF12-CP
    €1,057.38
    Only 1 left
    Only 1 left
  3. Frank Centofante - SL-10 - ATS34 & Micarta #049 - PRIVATE COLLECTION - handmade knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased.
    * Condition: 12/1990 model, overall in good condition, with a few small marks from time
    * Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
    * Sharpening: Re-sharpened, a few small marks on blade due to sharpening
    * Marks on blade: A few small marks
    * Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
    * Box: -
    * Scabbard: Suede leather case.
    * Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
    * Checked and Certified by our in-house laboratory

     

    Intended Use: Collection/Gentleman

    Type of production: Handcrafted
    Country of Production: USA
    Blade: stainless steel ATS34
    Blade finish: satin finish
    Handle: Stainless steel and Micarta
    Blade length: 83mm
    Blade thickness: 2.5mm.
    Length closed: 108mm.
    Total length: 189mm.
    Thickness when closed: 8mm.
    Weight: 99g.
    Closure: Back Lock
    Clip: -
    Sheath: Suede leather pouch
    Packaging: -
    Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049

    FC-SL10-CP
    €1,221.31
    Only 1 left
    Only 1 left
  4. Spyderco - Domino - CTS-XHP & Cubic Check Carbon Fiber - C172CFTIP - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: previously purchased
    * Condition: Overall in very good condition
    * Commercially available Discontinued, remained on the market from 2013 to 2017.
    * Sharpening: Factory.
    * Marks on blade: None
    * Marks on handle: A few small abrasion marks on the clip.
    * Box: -
    * Scabbard: -
    * Manuals, Certificates and Warranties: -
    * Checked and Certified by our in-house laboratory


    Intended Use: Sporting / EDC

    Production Type: Industrial
    Country of Production: Taiwan
    Blade: Stainless steel CTS-XHP
    Blade finish: Satin finish
    Handle: Titanium and Carbon Fiber laminated Cubic Check
    Blade length: 80mm.
    Blade thickness: 3mm.
    Length closed: 116mm.
    Total length: 195mm.
    Weight: 119g.
    Closure: Frame Lock R.I.L. (Reeve Integral Lock)
    Clip: Multiposition and removable, stainless steel
    Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearings

    SC172CFTIP-CP
    €269.67
    Only 1 left
    Only 1 left
  5. ExtremaRatio - Police I knife - Multi-purpose 2 blades - PRIVATE COLLECTION - knife

    KNIFE RETIRED FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: In very good condition
    * Commercially available NO
    * Sharpness: Original
    * Marks on blade: NO
    * Marks on handle: NO
    * Packaging: YES
    * Checked and Certified by our internal laboratory

    Type of production: Industrial
    Country of production: Italy
    Blade: in N690Co stainless steel
    Finish: Testudo burnishing
    Handle: Anodized aeronautical aluminum anticorodal
    Blade length: 85mm.
    Blade thickness: 2.5mm.
    Total length: 210mm.
    Weight: 152g.
    Sheath: -
    Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
    Notes: emergency blade with snap opening (length. 8 cm) - glass breaker - model from 2013 now out of production

    ER-AP-POLICE
    €258.20
    Only 1 left
    Only 1 left
  6. Boker Plus - Urban Trapper by Brad Zinker - 01BO730 - folding knife

    * Type: Previously purchased and used
    * Condition: Like new
    * Commercially available: yes
    * Sharpness: Factory
    * Marks on blade: No
    * Marks on handle: No
    * Packaging: Yes
    * Sheath: /
    * Manuals, Certificates and Warranties: yes
    * Checked and Certified by our internal laboratory

    Intended use: EDC / Sports

    Type of production: Industrial
    Country of manufacture: Taiwan
    Blade: VG-10 stainless steel
    Blade treatment: blackwash
    Handle: titanium
    Blade length: 47mm.
    Blade thickness: 1.7mm.
    Total length: 115mm.
    Weight: 31g.
    Clip: titanium
    Closure: Frame lock
    Packaging: cardboard box with Boker Plus logos
    Notes: Design by Brad Zinker


    While we've seen plenty of Boker products over the years, resourceful knife makers continue to find ways to surprise us. For example, Brad Zinker from Florida with his Urban Trapper, one of the thinnest profile titanium framelocks we've ever experienced. With just 8mm grip thickness (without clip), the term "slim" only inadequately describes the Urban Trapper for its usable size.

    The large holes and titanium transform the Urban Trapper into a real featherweight of just 48 g that can be carried extremely comfortably both in a suit pocket and in light summer trousers. Considering the overall minimalist design of the knife, the size of the flipper is equally reserved.

    When used, it still impresses with its outstanding functionality and reliably opens the blade on VG-10 ball bearings. The blade shape of this classic trapper pocket knife, widely distributed in the United States and worn for many years by Brad Zinker, was the inspiration for this unusual piece.

    BO-01BO730
    €118.85
    Only 1 left
    Only 1 left
    Rating:
    87%
    4.4
  7. Lionsteel - Daghetta knife in G10 by Max - PRIVATE COLLECTION - 8700G10 knife

    KNIFE RETIRED FROM PRIVATE COLLECTION
    * Type: Previously purchased
    * Condition: In like new condition
    * Commercially available: No
    * Sharpening: original
    * Marks on blade: No
    * Marks on handle: No
    * Box: present but not perfect
    * Manuals, Certificates and Guarantees: Yes
    * Checked and Certified by our internal laboratory

    Intended use: Sports/Tactical

    Type of production: Industrial
    Blade production: Italy
    Blade: D2 steel
    Blade Treatment: -
    Handle: G-10
    Blade length: 82mm.
    Blade thickness: 3mm.
    Closed length: 108mm.
    Total length: 190mm.
    Closed thickness: 16mm.
    Balancing: -
    Weight: 108g.
    Locking: TOL - Tactical Operation Lock
    Clips: -
    Sheath: -
    Packaging: cardboard box with Lion Steel logos
    Notes: Design by Max

    APLS-8700G10
    €64.75
    Only 1 left
    Only 1 left
    Rating:
    83%
    4.2
  8. Tops - White Fang Knife - WHTF-01 - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: previously purchased
    * Condition: overall in very good condition
    * Commercially available: discontinued
    * Sharpening: Factory
    * Marks on blade: No
    * Marks on handle: None
    * Box: -
    * Scabbard: Present
    * Manuals, Certificates and Warranties: Present
    * Checked and Certified by our in-house laboratory

     

    Intended Use: Hiking / Hunting

    Type of production: MidTech
    Country of manufacture: USA
    Blade: full tang 440C 58/60HRC stainless steel
    Blade Finish: Bead Blast Finish
    Handle: Antique White Micarta
    Blade Length: 83mm.
    Blade thickness: 5.5mm.
    Total length: 190mm.
    Weight: 324g.
    Sheath: Leather
    Packaging: -
    Notes: Each piece is numbered and accompanied by certificate of guarantee and authenticity.

    TOPS-WHTF-01-CP
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  9. Lakota - 271 Lil' Hawk knife - Wooden handle - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Knife from 2002, previously purchased
    * Condition: Overall in good condition
    * Commercially available: Single specimen
    * Sharpening: Factory sharpened
    * Marks on blade: Inaccuracy in the satin finish on the left side
    * Marks on handle: a few marks due to the inside of the sheath button
    * Box: Present, original and in good condition
    * Scabbard: leather, perfect
    * Manuals, Certificates and Warranties: - -
    * Checked and certified by our in-house laboratory

    Intended use: collection / gentleman / sportsman

    Type of manufacture: Industrial
    Country of Manufacture: Japan
    Blade: Stainless steel AUS 8A
    Handle: Mahogany, resin impregnated
    Blade length: 92mm.
    Blade thickness: 3.5mm.
    Length closed: 121mm.
    Total length: 212mm.
    Thickness when closed: 15mm.
    Weight: 191g. (245g. scabbard included)
    Opening: Two-handed, with nail bezel
    Closure: Back Lock
    Clip: -
    Packaging: cardboard box, with photo and description
    Notes: leather sheath

    AP-LAKOTA
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  10. Dietmar Kressler - Integral Drop Point - K190 & Snakewood - PRIVATE COLLECTION - craft knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased.
    * Condition: 1989 model, in like-new condition.
    * Commercially available: Unique specimen, entirely handmade
    * Sharpening: Factory sharpened.
    * Marks on blade: None
    * Marks on handle: None
    * Box: -
    * Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
    * Manuals, Certificates and Warranties: Warranty certificate issued by the Italian dealer of the time, not stamped or signed.
    * Checked and Certified by our in-house laboratory

     

    Intended Use: Collection/Gentleman

    Type of production: Handcrafted
    Country of Production: Germany
    Blade: Bohler K190 powder steel at 62HRC
    Blade finish: horizontal satin finish
    Handle: integral, from solid, with snakewood grips
    Blade length: 83mm
    Blade thickness: 4mm.
    Total length: 187mm.
    Weight: 139g.
    Sheath: leather, belt
    Packaging: -
    Notes: rare handcrafted knife made in 1989 by renowned German cutler Dietmar Kressler

    FC-KRES-SW-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  11. Benchmade - Mangus 53 Bali - D2 & Green G10 - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Overall in good
    * Commercially available Discontinued as of 2017.
    * Sharpening: Factory.
    * Marks on blade: Two small oxidation marks.
    * Marks on handle: None
    * Box: Absent
    * Scabbard: -
    * Manuals, Certificates and Warranties: Absent
    * Checked and Certified by our in-house laboratory



    Intended Use: Sporting

    Production Type: Industrial
    Country of Production: USA
    Blade: D2 60/62HRC steel
    Blade finish: Stone Washed
    Handle: G-10 and Aluminum
    Blade length: 85mm.
    Blade thickness: 3.5mm.
    Length closed: 118mm.
    Total length: 190mm.
    Thickness when closed: 15mm.
    Weight: 94g.
    Closure: Aluminum clasp
    Clip: Stainless steel
    Notes: Ball bearings between blade and handle

    BM-53-UCP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  12. Spyderco - Street Beat by Fred Perrin - PRIVATE COLLECTION - FB15P - knife


    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously purchased.
    * Condition: Overall in good
    * Commercially available: Discontinued in 2017.
    * Sharpening: Professionally re-sharpened.
    * Marks on blade: Small signs of wear and tear.
    * Marks on handle: None
    * Box: Present and original
    * Scabbard: Present and original, modified for belt carry.
    * Manuals, Certificates and Warranties: -
    * Checked and Certified by our in-house laboratory

    Intended Use: Tactical / Sporting / Neckwear

    Production Type: Industrial
    Country of Production: Japan
    Blade: full tang, Stainless steel VG-10
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 85mm.
    Blade thickness: 4mm.
    Total length: 181mm.
    Weight: 148g.
    Sheath: Neck, boltaron, with possibility of Tek-Lok or MOLLE type attachments
    Packaging: Cardboard box with Spyderco logos.
    Notes: Design by Fred Perrin - Discontinued item, previously purchased, from private collection - Supplied with two removable attachments for belt carry

    SFB15P-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  13. Al-Mar - SERE Attack 3003/B - PRIVATE COLLECTION - vintage knife

    Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.

    Intended use: Collection / Tactical
    Type of production: Industriae
    Country of production: Japan, Seki
    Blade: AM-6 stainless steel
    Blade treatment: satin finish
    Handle: in rubber, with brass spacers
    Blade length: 110mm.
    Blade thickness: 4mm.
    Length closed: 150mm
    Total length: 255mm.
    Weight: 320g.
    Closing: Back Lock
    Sheath: leather, new
    Packaging: cardboard box, with Japanese logos, but not original Al-Mar
    Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left head

    AM-3002DOL
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  14. Boker - Bud Nealy MCS Cocobolo Knife - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Like New
    * Commercially available Discontinued
    * Sharpening: Factory
    * Marks on blade: None
    * Marks on handle: None
    * Box: Present - Original
    * Scabbard: Present - Original, with all accessories included.
    * Manuals, Certificates and Warranties: Present
    * Checked and Certified by our in-house laboratory


    Intended Use: Tactical / Neck Knife / CQD

    Country of Production: Germany
    Blade: full tang in 440C 58/60HRC stainless steel
    Handle: cocobolo wood
    Blade length: 85mm.
    Blade thickness: 3mm.
    Total length: 185mm.
    Balance: Backward
    Weight: 90g.
    Clip: MCS2 System that allows 9 different carry options, all explained in the manual
    Sheath: Ultra flat Kydex sheath with additional magnetic retention
    Notes: knife withdrawn from private collection, like new

    Biographical Note:
    Bud Nealy is universally recognized as one of the best knifemakers in the world. He is also known as the inventor of the MCS (Multi Concealment Sheath) system that allows the knife to be placed securely in any type of position. And it is because of these two requirements that every day hundreds of his MCS systems are used by police officers, undercover agents, S.W.A.T. and R.A.I.D. members, U.S. embassy guards, Bodyguards and Air Rangers.

    BO-BNMCS-CP
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  15. Al-Mar - Hunting knife - PRIVATE COLLECTION - knife

    Rare knife produced by the Japanese Al-Mar around the 90s. Knife withdrawn from a private collection in like new condition - New knife with sheath and original box - Checked and certified by our in-house Coltelleria Collini laboratory.

    Intended use: sports / collection
    Type of production: industrial
    Blade: AUS 8 stainless steel
    Blade treatment: -
    Lama production: Japan
    Handle: micarta
    Blade length: 80mm.
    Blade thickness: 4mm.
    Closed Length: -
    Total length: 195mm.
    Weight: 117g.
    Closing: -
    Clip: -
    Sheath: in leather
    Notes: with original box

    am-cp1
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  16. Rockstead - Shin knife - ZDP189 in SanMai - PRIVATE COLLECTION - knife

    Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.

    Checked and certified by our internal laboratory - Collini Cutlery.

    The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.

    Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.

    Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
    Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
    Blade length: 95 mm.
    Blade thickness: 4 mm.
    Total length: 210 mm.
    Weight: 145 g.
    Closure: Liner Lock in 402J2 steel at 52HRC
    Clip: 402J2 to 52HRC steel
    Notes: Accompanied by a guarantee certificate with technical specifications.

    RO-S-ZDP-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  17. We Knife Co. - Framelock Flipper knife Dual Tone Gray - PRIVATE COLLECTION - 605E - knife

    Knife withdrawn from a private collection - Model discontinued by WE KNIFE - Like new condition, with original packaging - Checked, certified by our internal laboratory Collini Cutlery

    Intended use: Sports / Collection

    Type of production: Industrial
    Country of production: China
    Blade: CPM-S35VN 59 / 61HRC stainless steel
    Blade treatment: dual tone, satin & black PVD
    Handle: 6AL4V titanium machined with numerical control
    Blade length: 77mm.
    Blade thickness: 4mm.
    Length closed: 101mm.
    Total length: 178mm.
    Weight: 114g.
    Closing: Framelock
    Clip: 6AL4V titanium
    Packaging: cardboard box with We Knife Co. logos
    Notes: Carson Flipper opening system on ceramic ball bearings

    WK-605E-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
Set Ascending Direction

17 Items





ecommerce sicuro