Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Never used, complete with all accessories, knife like new, a few small scratches on the leather sheath
* Available on the market: Available
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete
* Sheath: Present, with a few small scratches
* Manuals, certificates, and warranties: Present
* Checked and certified by our in-house laboratory

Intended use: Utility/Outdoor

Type of production: Industrial
Country of production: Italy
Blade: Niolox 59/61HRC stainless steel with Black Idroglider finish
Handle: Bison Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: advanced to 1cm
Weight: 235g.
Sheath: leather
Packaging: cardboard box with Fox logos
Notes: previously purchased knife from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, never used, with some minor signs of wear
* Available on the market: Difficult to find
* Sharpness: Factory sharpness, could be improved
* Marks on blade: Some minor signs of wear
* Marks on handle: Some minor signs of wear
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates, and Warranties: -
Checked and Certified by our in-house laboratory

Created for survival, it became a legend.

The Randall Model 18 is much more than a knife: it is a symbol of resistance, ingenuity, and determination. Created to accompany military pilots on the most extreme missions, it has won over generations of adventurers, explorers, and collectors around the world. With its tubular handle and unmistakable battle design, it embodies the essence of true survival—where only reliability, strength, and the ability to adapt to any situation matter.

Today, as then, it is the perfect ally for those who are not satisfied with just any knife. For those looking for a faithful companion, ready for anything. For those who love to own a piece of history, hand-forged in the United States, still according to tradition.

A timeless icon, built to last a lifetime. And beyond.

Intended use: All-round utility/survival 

Type of production: Handcrafted
Country of production: Orlando, Florida, USA
Blade: 440B stainless steel at 57/59HRC
Blade finish: satin
Handle: tubular, stainless steel, with through guard and brass screw cap 
Blade length: 142mm.
Blade thickness: 6mm.
Total length: 264mm.
Weight: 345g.
Sheath: brown oiled leather, with belt loop, front button pocket, and sharpening stone
Notes: previously purchased knife, withdrawn from private collection, in excellent condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few small marks from time.
* Marks on handle: None
* Box: Espotive box present, with a few small marks due to time
* Scabbard: Present
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

2014 knife created through a collaboration between Fox and Hill Knives that commemorates the ISAF (International Security Forces) and ANSF (Afghan National Security Forces) memorial unveiled Sept. 22, 2013, in Kabul, Afghanistan, to honor fallen military personnel during peacekeeping operations in the country. The monument, with inscriptions in English, Pashtu and Dari, is a tribute to the different nationalities involved in the missions. The unveiling ceremony was attended by dignitaries from the Afghan government, security forces and ISAF, underscoring the value of remembrance and the sacrifices made.

Intended Use: Tactical/Collection

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: hard ceramic coated
Handle: G10
Blade length: 150mm.
Blade thickness: 6.3mm.
Total length: 279mm.
Weight: 220g.
Sheath: made of Kydex, with MOLLE clip
Packaging: Cardboard box / display box with ISAF and Fox Knives symbols and logos
Notes: Designed by Hill Knives - previously purchased knife from a private collection

KNIFE RETRIEVED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private owner, previously purchased
* Condition: Overall in excellent condition, sheath lanyard slightly worn (detailed photo available)
* Availability: Discontinued, limited edition of 15 pieces
* Factory Edge: Yes
* Blade Marks: None
* Handle Marks: None
* Box: Not included
* Sheath: Included
* Manuals, Certificates & Warranty: Not included
* Inspected and Certified by our internal laboratory

Japanese steel meets Italian excellence

For this 2021 collaboration between Coltelleria Collini of Busto Arsizio and Fox Knives of Maniago, we decided to offer the 609OD Bushman, an outstanding bushcraft knife produced by Fox Knives of Maniago, using high-performance Japanese V-Toku2 Sanmai steel (5mm) from Takefu Steel instead of the D2 steel used in the standard model.

Specifically, we used high-carbon V-Toku2 at 62/63HRC for the central core and stainless SUS410 for the outer layers, ensuring exceptional cutting ability, penetration, and edge retention. At the same time, the blade offers high corrosion resistance and increased toughness due to the laminated structure and external stainless steel.

Technical Specifications

Like the ancient swords of the Japanese Samurai.

The laminated steel—imported into Italy by Collini Steel directly from Takefu Steel in Japan—follows the ancient Japanese tradition of crafting legendary Samurai swords. As early as the 1100s, Japanese blacksmiths combined different materials to create Katana swords with incredible cutting power, strength, and flexibility, unmatched at the time. This revolutionary forging technique has allowed Samurai swords to survive to this day as some of the most fascinating objects ever created.

By applying this tradition to modern metallurgy, we now have technologically advanced steels that have been tested and widely used in knife-making by renowned brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, and more.

San Mai Steel Features: This consists of different types of metals fused together to create a composite steel that enhances and intensifies the individual strengths of each material:

• Longer-lasting cutting edge: High-performance, high-carbon core steels (VG10, CoS, Shiro) or sintered steels (SPG2) provide exceptional hardness and cutting performance after heat treatment.
• Increased toughness: Inspired by Japanese sword-making, the multi-layered steel is highly resistant to breakage due to the toughness of the core steel and the flexibility of the outer stainless steel layers.
• Improved corrosion resistance: The outer stainless steel layers provide high corrosion resistance. The galvanic combination of Takefu Steel’s materials further enhances resistance along the edge.
• Ease of reworking after heat treatment: Unlike standard steels, the outer layers retain some softness even after hardening, allowing for easier processing, drilling, and welding.
• Enhanced aesthetics: Multi-layered or Damascus-patterned knives are visually striking, elegant, and highly sought after by collectors worldwide.

For more information: Collini Steel

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: -
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: -
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Deer wood and leather rings, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: deer horn and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 275g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: Nylon pouch with zipper, with Randall Knives logos
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: Original warranty sheet
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Desert Ironwood and leather, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: Desert Ironwood and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 270g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new - provided with Randall Knives zippered nylon pouch and paper warranty

The Model 26 Pathfinder is an excellent lightweight skinning and outdoor knife. The blade design favours both cutting and pointing work. This knife has become one of the most popular small hunting knives.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Good overall condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: Slight on the guard, the deer part is parts as new
* Packaging: -
* Scabbard: Original, leather, in good condition, some marks on the front
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Deerskin
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 215mm.
Balance: set back about 2cm from the guard
Weight: 124g. (206g. scabbard included)
Sheath: brown leather with belt loop
Notes: -

The Model 16 was designed to meet the demand for an almost indestructible multi-purpose knife, including intensive use in salt water (careful cleaning and maintenance is however recommended). A special wax-impregnated sheath is included.

7″ (17.8cm) stainless steel blade with 6.5mm thickness. The top of the blade is slightly serrated to allow easy thumb placement. Black Micarta handle. Extra-heavy 7/8″ (2.2cm) wide tang that extends through a channel in the handle, securely fixed with epoxy. 

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased, manufactured in 2023
* Condition: Very good condition, like new
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in very good condition
* Manuals, Certificates and Warranties: - - * Checked and Certified by our in-house laboratory.
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Micarta
Blade length: 178mm.
Blade thickness: 6.5mm.
Total length: 297mm.
Balance: on the guard
Weight: 362g. (522g. including scabbard)
Sheath: Brown leather with belt loop
Notes: -

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available
* Sharpness: Factory, never resharpened
* Marks on blade: none
* Marks on handle: None
* Box: NOT present
* Sheath: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our internal laboratory

Intended use: Combat / All Round Utility

Blade: N690Co 59/60HRC stainless steel
Treatment: Coyote Tan Idroglider
Handle: Kraton
Blade length: 185mm.
Blade thickness: 5mm.
Closed length: -
Total length: 315mm.
Balancing: On the guard branch
Weight: 285g.
Closure: -
Clips: -
Sheath: Modular in fiberglass, Nylon and Cordura with stainless steel cable cutter
Note: -

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in good condition
* Commercially available: in production
* Sharpness: Original sharpness
* Marks on blade: signs of use
* Marks on handle: None
* Box: Original
* Sheath: /
* Checked and certified by our internal laboratory

Intended use: Survival/Utlity

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade Treatment: Black Hidroglider
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Balancing: Advanced to 3cm. from the guard branch
Weight: 340g.
Sheath: in Nylon, M.O.L.L.E compatible.
Packaging: cardboard box with Fox logos
Notes: Survival kit included with M.O.L.L.E. type attachments.

The survival kit contains:
* water container
* nylon strap
* mini compass
* candle
* Flint
* wire saw
* fishing kit
* multi-tools
* matches
* needle and thread kit
* razor blade
* emergency whistle
* copper wire
* SOS mirror
* pencil
* fluorescent light stick

This is a smaller version of Bo Randall's original knife, made in the Scagel knife style. 12.2 cm blade made of 4.5 mm thick stainless steel. This size and shape are popular with outdoor activity experts worldwide. It has a nickel silver guard and back cap and a handle made of authentic Indian deer antler. It weighs about 168 grams and comes with a brown leather sheath.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting/fishing

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deerskin with through-guard and nickel silver tang
Blade length: 122mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Balance: backward
Weight: 168g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

The Model 27 is an ideal all-purpose sports knife. This knife has a stainless steel blade, 5mm blade thickness and 147mm length with concealed tang construction. The handle has nickel silver guard and pommel and a leather and walnut wood ring handle with black micarta and nickel silver spacers. 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: made of leather and walnut wood rings with through-guard and nickel silver tang
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 262mm.
Balance: backward
Weight: 230g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: A few small marks given by being placed in the sheath.
* Marks on handle: A few small marks on the duralumin pommel.
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of manufacture: USA
Blade: carbon steel O-1
Blade finish: satin finish
Handle: leather rings with brass through-guard and duralumin tang
Blade length: 118mm.
Blade thickness: 4.5mm.
Total length: 230mm.
Balance: backward
Weight: 210g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

This Model 19-4 Bushmaster from Randall Made Knives features a clip point blade with satin finish, false counterbore and serrated thumb rest. The handle consists of nickel silver through-guard and recoil pad with colored micarta spacers and monolithic curved deer antler grip. Includes original "Model A" leather sheath with belt loop and sharpening stone.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deer antler with through-guard and nickel silver recoil pad
Blade length: 115mm.
Blade thickness: 5.5mm.
Total length: 228mm.
Balance: set back
Weight: 281g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

CUCHILLO DE COLECCIÓN PRIVADA
* Tipo: Comprado Anteriormente 
* Condición: Muy buen estado
* Afilado: Original
* Marcas en la hoja: Ninguna
* Marcas en el mango: Ninguna
* Embalaje: -
* Vaina: original, cuero, en muy buen estado
* Manuales, Certificados y Garantías: - - * Comprobado y certificado por nuestro laboratorio interno.
* Comprobado y certificado por nuestro laboratorio interno

El Randall Model 1 Fighter fue uno de los primeros modelos producidos en el taller de Randall en Orlando. Un Modelo 1, fabricado por el propio Bo Randall, sirvió como prototipo para la Springfield Randall que fue producida por la Northampton Cutlery Company cerca de Springfield, Massachusetts, en 1943 y 1944 para uso del ejército estadounidense.

Uso previsto: táctico / militar

Tipo de fabricación: artesanal
País de fabricación: USA
Hoja: espiga completa en acero inoxidable 440B
Acabado de la hoja: satinado
Empuñadura: protector pasante de latón y empuñadura monolítica de micarta
Longitud de la hoja: 177 mm.
Grosor de la hoja: 5mm.
Longitud total: 295mm.
Equilibrio: en la rama de la guarda
Peso: 350g.
Funda: cinturón, cuero negro
Notas: Cuchillo comprado anteriormente, retirado de colección privada

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Typology: withdrawn by private individual
* Condition: in excellent condition
* Available on the market: discontinued since 2015
* Sharpening: factory sharpening
* Marks on the blade: small marks on the tip caused by the extraction from the sheath
* Marks on the handle: no marks
* Box: original Fox box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

ST3-F is a knife studied and designed by the head instructor Paolo Bozzo of TEAM SURVIVAL (survival and survival school).
This project was developed through years of direct experience in the field.

Intended use: Survival / Utlity

Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: Black Teflon
Handle: Green Canvas Micarta
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 360mm.
Balance: Advanced to 2.5cm. from the guard branch
Weight: 552g.
Sheath: in cordura with molle attachments
Packaging: cardboard box with Fox logos
Notes: designed by Paolo Bozzo

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Typology: withdrawn by private individual
* Condition: in like new condition
* Commercially available: discontinued from 2021
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: without box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Tactical

Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade Treatment: Titanium Nitriding
Handle: Forprene
Blade length: 135mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 275mm.
Thick when closed: -
Balancing: -
Weight: 280g.
Closure: -
Clip: -
Sheath: Kydex and Cordura
Packaging: -
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased and used.
* Condition: In acceptable condition, shows several signs of wear and oxidation to the blade coating.
* Commercially available: Professionally resharpened.
* Marks on blade: several signs of use and oxidation marks that do not impair its functionality or undermine its sturdiness in use
* Marks on handle: normal signs of use.
* Box: absent
* Scabbard: Present, in good condition.
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / Utility

Type of production: industrial
Blade: stainless steel N690Co 58/60HRC
Country of manufacture: Italy
Handle: forprene, removable
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 357mm.
Balance: forward, 45mm from the lower guard branch
Weight: 380g.
Sheath: made of 1000D OD Green cordura, MOLLE compatible
Notes: Foxionic surface treatment at 72/75HRC

Knife Withdrawn from Private Collection
Type: Previously Purchased
Condition: Excellent
Available in the market: No
Sharpening: Original
Marks on the blade: No
Marks on the handle: No
Packaging: Yes
Sheath: In Kydex
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our internal laboratory
Intended Use: Tactical/CQC

Type of Production: Industrial
Blade Production: Italy
Blade: Full tang in N690Co steel 58/60HRC
Blade Treatment: Teflon Coating
Handle: G-10
Blade Length: 75mm.
Blade Thickness: 4mm.
Closed Length: -
Total Length: 195mm.
Thickness when closed: -
Balance: Backward, at 3cm.
Weight: 170g.
Lock: -
Clip: on the sheath
Sheath: in Kydex
Packaging: Gray cardboard box with Fox logos
Notes: -