Passion for knives
-
ExtremaRatio - BF2CD - Drop Point - knife
Intended Use: Tactical / Military
Type of production: industrial
Blade: Stainless steel 58HRC N690Co
Production Blade: Italy
Handle: Anticorodal
Blade length: 90mm.
Blade Thickness: 3mm.
Length closed: 124mm.
Total length: 210mm.
Balance: -
Weight: 140g.
Lock: Liner Lock
Clip: Reversible and removable stainless steel
Sheath: -
Notes: safety locks open with a knife10885 -
Spyderco - Endura Flat Ground - Black - C10FPBK - Knife
Intended use: Sport
Type of production: industrial
Blade: stainless steel VG-10
Treatment Lama: -
Production Blade: Japan
Handle: Gray FRN with stainless steel liners drowned
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall Length: 220mm.
Thick when closed: 15.5mm.
Balance: -
Weight: 94g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Sharpening Flat GrindC10FPBK -
Nilte - Quiete - White Mirror Wash - 20pcs Limited Edition - knife
COMFORTABLE TO WEAR !
The features of this knife are pure pocket . For this reason, QUIET been designed without clip and button opener blade. The rounded lines , the size and weight extremely low compate add pleasure to the port.
PLEASURE OF USE
The introduction of PBL on QUIET gave him the opportunity to balance its proportions . The handle for 3 fingers and finger grooves give the grip strength . The new type of tooth wave , the edge with the outer radius and inner bevel , however , guarantee the accuracy Stillness of Use natural . Taken together, these features give the QUIETE a high ease of use.
HIGH LIGHT
The center of gravity of the knife is amazingly located in the area of the heart , central to the usual closable on the market . The amazing fact is that the handle with the PBL system weighs as much as the thin blade from 3mm filled with grinding . The straordinara lightness and solidity of QUIETE will give you an unforgettable experience .
SCREW ANTI-SLIP
In case you have the need to support the QUIET on the lives of the fulcrum , its design is great for a comfortable grip and non-slip . The increased size also deliver impressive structural stability to the knife . The focus of the screws and the whole industry are made with high-precision lathes with specific designs , in order to avoid games in the mechanism .
THE HOLE WITH WINGS WINGS PIVOT HOLE
This hole is introduced into the fulcrum knife nilte gives big advantages to the fluidity of movement of the blade. In fact, the seats are designed to be filled with lubricant in order to reduce the friction between the blade pivot and washers for smooth running at the highest levels .
CURVE LIFESAVER !
Nilte has introduced a new way of thinking about the pocket knife . The main concept is developed from which the design was the blade. The pocket knife would be useful in any occasion, for this reason, has been designed to QUIETE a blade sheepfoot . The main characteristic of this blade is in the fact of not having a sharp tip , but a curve that reaches the wire to decrease the risk of offending persons or damage objects accidentally .
SAFETY FIRST !
The closure of the knife with one hand is not always safe . At nilte has been studied a simple but effective solution , which is not imposed on the line and the functionality of the knife. As you can see , the blade has a ledge in the area prior to the wire , called the kick . This has the function , with the help of more advanced finger on the handle , to slow its closing stroke .
THE NAME
The first project was called QUIET nilte to all the features mentioned above . A knife that does not want to be aggressive , but quiet and useful for a use not extremely heavy, always a pleasure to take in your pocket , ready to help you live your experience in the best possible way.
Intended Use : Sport / EDC
Type of production : Industrial
Production Blade: Italy
Blade: Sandvik 14C28N stainless steel
Treatment Blade: Stone Wash
Handle: G10
Blade length : 64mm .
Blade thickness : 3mm .
Closed Length : 103mm .
Overall length: 178mm .
Thick when closed: 12mm .
Balancing : the pin opening
Weight: 60g .
Closure: Pure Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with logos Nilte , paracord , warranty
Notes: First Production Run built in only 20 copies7287W€262.30Only 1 left -
Citadel - Fidel Buffalo Slipjoint Knife - 207CR - handmade knife
Intended use: collectible/sporting
Type of production: Handcrafted
Blade Production: Cambodia
Blade: DNH7 carbon steel selective hardening 40/60HRC
Blade Finish: mirror polished
Handle: water buffalo horn
Blade length: about 80mm.
Blade thickness: about 3mm.
Length closed: about 113m.
Total length: about 190mm.
Thickness when closed: about 17mm.
Balance: -
Weight: about 58g.
Closure: -
Clip: -
Sheath: leather pouch
Packaging: -
Notes: each knife is handmade and differs minimally in size, weights and aestheticsCI-207CR -
Cold Steel - Kobun much - 17T - knife
Cold Steel - Kobun much - 17T - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel AUS 8
Treatment Lama: -
Handle: Kray-Ex ™
Blade length: 136mm.
Blade thickness: 3mm.
Length closed: -
Total length: 250mm.
Thick when closed: -
Balance: -
Weight: 125g.
Closing: -
Clip: -
Sheath: Secure-Ex ® Sheath
Packaging: Cardboard box with logos Cold Steel
Notes: -5599K -
Cold Steel - Rajah III knife - 62JM - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-10A
Trattamento Lama: -
Manicatura: Grivory con liners annegati in acciaio
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza totale: 210mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 142g.
Chiusura: Tri-Ad Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Cold Steel
Note: -CS62JM -
Conaz Consigli Scarperia - Anconetano ox horn 20 cm - 50001 - knife
Traditional knife produced by master cutlers in Scarperia, a place where, since 1300, the artisan manufacture of Italian knives has continued.
Fisherman's knife, typical of the Adriatic sea belt. With external spring, handle in full polished bovine horn, on the end of the back it has a deep step at right angle useful for branching nets.
Intended use: CollectionType of production: artisanal
Blade: X50CrMoV15 stainless steel
Production Lama: Italy
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 200mm.
Weight: 58g.
Closing:
Notes: handcrafted in the city of Scarperia (FI)The colors of the materials with which our handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you. A slight surprise is therefore always accompanied by every online purchase of our handcrafted products: but this is also the beauty of craftsmanship.
50001 -
Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife
Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50002 -
Conaz Consigli Scarperia - Mozzetta light ox horn 50034 - knife
This knife owes its name to the blunt tip which is absolutely missing as if the blade had been cut off.
Pointless knives became much more widespread with the "Giolitti law" of 1908 which fixed the length of the blade of pointed knives at only four centimeters.
For mozzette, the limit rose to ten centimeters, offering the possibility of safely carrying a knife of sufficient size in your pocket without risking the rigors of the law.Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 185mm.
Weight: 63g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseThe craftsmanship is beautiful because it is varied
The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.50034 -
Conaz Consigli Scarperia - Pattada Brotzu knife ox horn - 53143 - 24cm - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 76g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53143 -
ExtremaRatio - BF1CT knife - Tanto Point - knife
Type of production: industrial
Blade: stainless steel N690Co 58HRC
Lama production: Italy
Handle: Anticorodal
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 99mm.
Total length: 168mm.
Balancing: -
Weight: 85g.
Closure: Liner Lock
Clip: reversible and removable in stainless steel
Sheath: -
Note:ER-BF1CT-BK -
ExtremaRatio - BF2CD knife - Drop Point - knife
Intended Use: Tactical / Military
Type of production: industrial
Blade: Stainless steel 58HRC N690Co
Production Blade: Italy
Handle: Anticorodal
Blade length: 90mm.
Blade Thickness: 3mm.
Length closed: 124mm.
Total length: 210mm.
Balance: -
Weight: 140g.
Lock: Liner Lock
Clip: Reversible and removable stainless steel
Sheath: -
Notes: safety locks open with a knifeER-BF2CD-BK -
ExtremaRatio - BF2CT Desert Warfare Tanto Point - coltello
Destinazione d'uso: Tattico/Militare
Tipo di produzione: industriale
Lama: in acciaio inox N690Co 58HRC
Produzione Lama: Italia
Manicatura: Anticorodal
Lunghezza lama: 90mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 124mm.
Lunghezza totale: 210mm.
Bilanciatura: -
Peso: 140g.
Chiusura: Liner Lock
Clip: reversibile ed amovibile in acciaio inox
Fodero: -
Note: Fermo di sicurezza a coltello apertoER-BF2CT-DW -
ExtremaRatio - BF3 Dark Talon - knife
Destinazione d'uso: Sportivo / Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: Testudo
Manicatura: Anticorodal
Lunghezza lama: 125mm.
Spessore lama: 3mm.
Lunghezza chiuso: 150mm.
Lunghezza totale: 270mm.
Spessore da chiuso: 17mm.
Bilanciatura: -
Peso: 120g.
Chiusura: Liner Lock
Clip: amovibile in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Extrema Ratio
Note: -ER-BF3 -
Fallkniven - NL1 - Thor - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 254mm.
Blade Thickness: 7mm.
Length closed:-mm.
Total length: 385mm.
Balance: advanced to 3.5 cm. the branch of lower guard
Weight: 520g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL1 -
Fallkniven - SK3 Juni Birch - leather sheath - knife
Intended Use: Hunting
Type of production: industrial
Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Lama: -
Production Blade: Japan
Handle: Birch Wood
Blade length: 69mm.
Blade Thickness: 3mm.
Total length: 145mm.
Balance: backlog of 1 cm from the branch guard
Weight: 54g.
Sheath: Leather
Notes: -F-SK3 -
Fox - FKMD - 49° Capricorn - FX-ALSR-49 - knife
Designed to solve emergency and survival situations, it is particularly suitable for its characteristics as equipment for pilots, aircraft crews and paratroopers.
This knife is currently supplied to the 49th "Capricorn" Air Cavalry Helicopter Squadron Group stationed at the "Francesco Baracca" barracks in Casarsa della Delizia (PN) with tasks of armed reconnaissance, armed escorts, attack, deep attack, precision attack, fire support, suppression of air defense centers and security. They also contributed from the sky to the ground security of the Italian contingents in Somalia, Albania, Kosovo.
Intended use: Tactical
Blade: N690Co stainless steel
Lama Italy production
Handle: G-10 black
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 145mm.
Total length: 240mm.
Balancing: -
Weight: 230g.
Closure: Liner Lock
Clip: removable, in stainless steel
Sheath: rigid, thigh, in green nylon
Notes: emergency belt cutter, wood saw with liner lock closure - double safety lock to prevent blade closureFX-ALSR-49 -
Fox - Machete Macio II - 680 - knife
Fox - Macio 2
Machete suitable for strong use, as camping and other outdoor activities. Well balanced (toward the tip), easy to use due to its ergonomic handle.
Blade: stainless steel 425
Handle: hard rubber
Blade Length: 290 mm.
Blade Thickness: 3 mm.
Total Length: 445 mm.
Weight: 500 g.
Sheth: leatherFX-680 -
Helle Norway - Temagami Les Stroud Knife - coltello - No. 1300
Les Stroud was born in Mimico - Ontario in 1961.
Canadian musician, filmmaker and survival expert, Les Stroud is best known as the creator, writer, producer, director, cameraman and star of the television series 'SurvivorMan'.This knife is a collaboration between Les and the famous Norwegian company Helle.
Intended use: hunting
Type of production: semi-crafted
Blade: Sandvik 14C28N steel
Handle: Birch
Blade length: 110mm.
Blade thickness: 3mm.
Total length: 230mm.
Balance: set back 2.5cm
Weight: 143g.
Sheath: leather
More information: http://www.lesstroud.ca/HE-1300 -
Laguiole En Aubrac - Alsacien Ebony - ALS99EBC / NSB1 - knife collection
Destination: French collector's regional knife
Blade: 12C27 Swedish polished stainless steel to 54HRC.
Handle: ebony wood
Blade length: 70 mm.
Blade thickness: 2.5 mm.
Total length: 180 mm.
Weight: 70 g.
Folders: Stainless Steel
Heads: Stainless Steel
Closure: Retention spring
Clip: Absent
Sheath: Absent2481 -
Laguiole En Aubrac - Texalium - coltello collezione
Coltello chiudibile realizzato artigianalmente dalla Laguiole En Aubrac una delle migliori e più antiche aziende francesi produttrici di coltelli “Laguiole”.
– Acciaio Lama: 12C27 lucidata a specchio
– Manicatura: in Fibra di Carbonio e Texalium
– Lunghezza totale: cm 21,5
– Lunghezza lama: cm 10
– Molla e “mosca” o “ape” (simbolo che contraddistingue un Laguiole visibile sul dorso del coltello) forgiata
– Peso: 89 grammi
3258 -
Mcusta - Yoroi Damasco - 37D - knife
Intended Use: sporivo / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 59/60HRC cheeks and stainless steel external
Treatment Lama: -
Blade Production: Japan
Handle: damascus steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 90mm.
Total length: 162mm.
Balance: -
Weight: 86g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -3984 -
Ontario / Utilitac II - JPT-3S Drop by Joe Pardue - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: -
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Sports / EDC
Type of production: Industrial
Blade production: Taiwan
Blade: AUS-8 58HRC stainless steel
Blade Treatment: -
Handle: Zytel
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 205mm.
Closed thickness: 14mm.
Balancing: -
Weight: 152g.
Closure: Liner Lock
Clip: stainless steel
Sheath: -
Packaging: -
Notes: Design by Joe PardueAP-2798 -
Roselli - Carpenter's knife - R110 - craft knife
This handmade Finnish knife is Roselli's version perfect for outdoor use. The design is inspired by traditional carving knives and thanks to its handy size, you can fit it anywhere. The knife also works well as a hunting tool and the size of the blade makes it suitable for hunters who prefer to hunt smaller game.
The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: -
Total length: 195mm.
Balance: -
Weight: 72g.
Closure: -
Clip:-
Sheath: brown leather
Note: -RO-R110 -
Roselli - Grandfather knife - R120 - handcrafted knife
This handmade Finnish hunting knife is the shorter version of the classic "hunting knife". Extremely popular model due to its handy size which makes it easy to carry anywhere.
The slightly curved and short blade is particularly useful and comfortable for hunting use.
The blade is made of forged carbon steel, and the handle is made of curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: -
Total length: 180mm.
Balancing: -
Weight: 95g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-R120 -
Roselli - Grandmother knife - R130 - handcrafted knife
The small and handy "Mummunhammas" (grandmother's tooth) is a traditional knife from a time when old people used knives to chop food, once their teeth were gone.
Roselli's handmade Finnish Grandmother's Knife is an all-round outdoor knife that can fit into any space and therefore a very popular and loyal companion to take with you into the woods.
The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted Finnish vegetable tanned leather sheath.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: -
Total length: 150mm.
Balancing: -
Weight: 52g.
Closure: -RO-R130 -
Roselli - Hunting knife - R100 - handcrafted knife
The "first" Roselli, with a minimalist design dating back to 1976. For over 45 years it has been performing in the wild nature and casually tackling hunting, fishing and life in the open air.
This handmade Finnish hunting knife was originally developed as a hunting knife for moose hunters in Finland and quickly became the perfect companion for handling larger game such as moose, wild boar and larger deer. The design and profile of the blade make it excellent for skinning game.
The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 227mm.
Balancing: -
Weight: 120g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-R100 -
Roselli - Hunting knife - UHC steel - RW200 - handcrafted knife
The "first" Roselli, with a minimalist design equal to that which was produced in 1976. For over 45 years it has been perfect for specific use in the outdoor environment, for hunting, fishing and life in the open air.
This handmade Finnish hunting and outdoor knife was originally developed as a hunting knife for moose hunters in Finland and quickly became the perfect companion for handling larger game such as moose, wild boar and larger deer. The design and profile of the blade make it excellent for skinning game.
The blade is made of UHC (Ultra High Carbon) steel and the handle is made of heat-treated curly birch, coated with linseed oil, which ensures a firm grip even when wet. UHC steel produces an extremely sharp knife that retains its sharpness for a long time. Comes with a handcrafted sheath of dark vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 230mm.
Balancing: -
Weight: 115g.
Closure: -
Clips: -
Sheath: Vegetable tanned leather
Note: -RO-RW200 -
Roselli - Little Carpenter knife - R140 - handcrafted knife
Finnish handmade hiking knife by Roselli for beginners, scouts and young outdoor enthusiasts. This little knife is designed with safety in mind and its blunt point makes it safe, while the sharp edge is suitable for carving and other difficult woodworking challenges. As the user's skill increases, the point can be sharpened more sharply.
The blade is made of carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: collection/huntingType of production: artisanal
Blade: 60 HRC carbon steel
Blade treatment: -
Handle: arctic birch briar
Blade length: 60mm.
Blade thickness: 3mm.
Closed length: -
Total length: 155mm.
Balancing: -
Weight: 45g.
Closure: -
Clips: -
Sheath: in brown leather
Note: -RO-R140 -
Roselli - UHC carpenter's knife - RW210 - craft knife
This handmade Finnish knife is Roselli's version of the ultimate hiking knife. The design is inspired by traditional carving knives and thanks to its handy size, you can fit it anywhere. The knife also works well as a hunting knife and the size of the blade makes it suitable for hunters who prefer hunting smaller game.
The blade is made of UHC (Ultra High Carbon) steel and the handle is made of heat-treated birch, coated with linseed oil, which ensures a firm grip, even when wet. The UHC steel makes the knife extremely sharp and keeps its sharpness for a long time. Comes with a handcrafted dark vegetable tanned Finnish leather sheath.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: in UHC 64/66HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: -
Total length: 190mm.
Balancing: -
Weight: 65g.
Closure: -
Clips: -
Sheath: brown leather
Note: -RO-RW210 -
Viper - Bergamasco Bosso by Fabrizio "Silvester" Silvestrelli - V5744BO - coltello regionale
Coltello tipico delle valli bergamasche, in uso sin dalla prima metà dell’ottocento. E' considerato uno dei più bei coltelli di antoca tradizione regionale per le sue caratteristiche forme e proporzioni.
Destinazione d'uso: Regionale / Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 57/59HRC
Trattamento Lama: -
Manicatura: Legno di Bosso
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 96g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2775BO -
Viper - Bergamasco Cocobolo by Fabrizio "Silvester" Silvestrelli - V5744CB - coltello regionale
Coltello tipico delle valli bergamasche, in uso sin dalla prima metà dell’ottocento. E' considerato uno dei più bei coltelli di antoca tradizione regionale per le sue caratteristiche forme e proporzioni.
Destinazione d'uso: Regionale / Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 57/59HRC
Trattamento Lama: -
Manicatura: Legno di Cocobolo
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 96g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2775CB -
Viper - Gobbo Corno Bovino by Fabrizio "Silvester" Silvestrelli - V5746PC - coltello regionale
Coltello tipico dell'abruzzo, del molise e del basso lazio, in uso sin dal primo ottocento. E' caratterizzato da una lama a foglia di canna, stretta ed appuntita e da un manico piegato ad assumere la curvatura del gobbo.
Destinazione d'uso: Regionale / Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox 440A
Trattamento Lama: -
Manicatura: Punta di corno bovino
Lunghezza lama: 87mm.
Spessore lama: 3mm.
Lunghezza chiuso: 112mm.
Lunghezza totale: 200mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 86g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2835CO -
Viper - Gobbo Olivo by Fabrizio "Silvester" Silvestrelli - V5746UL - coltello regionale
Coltello tipico dell'abruzzo, del molise e del basso lazio, in uso sin dal primo ottocento. E' caratterizzato da una lama a foglia di canna, stretta ed appuntita e da un manico piegato ad assumere la curvatura del gobbo.
Destinazione d'uso: Regionale / Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox 440A
Trattamento Lama: -
Manicatura: Legno di Olivo
Lunghezza lama: 87mm.
Spessore lama: 3mm.
Lunghezza chiuso: 112mm.
Lunghezza totale: 200mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 86g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2835OL -
Viper - Maremmano Cherrywood by Fabrizio "Silvester" Silvestrelli - V5742CI - regional knife
Typical knife in the Tuscan and Lazio Maremma, which has been in use since the first half of the nineteenth century. It is present in the criminological museum of Rome. It was used by the rebels of the criminal baths of Civitavecchia.
Purpose: Regional / Sportsman
Type of production: Industrial
Blade production: Italy
Blade: Stainless steel N690Co 57 / 59HRC
Blade Treatment: -
Handle: Cherry Wood
Blade Length: 85mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 200mm.
Closure thickness: -
Balance: -
Weight: 85g.
Closure: double spring retention on inner liners
Clip: -
Sheath: Suede leather bag with Viper logos
Packing: black cardboard case with silver logos, warranty certificates
Notes: numbered copies with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli2774CI -
Viper - Maremmano Corno by Fabrizio "Silvester" Silvestrelli - V5742PC - coltello regionale
Coltello tipico della maremma toscana e laziale, in uso sin dalla prima metà dell’ottocento. Presente nei reperti del museo criminologico di Roma, usato dai rivoltosi dei bagni penali di Civitavecchia.
Destinazione d'uso: Regionale / Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 57/59HRC
Trattamento Lama: -
Manicatura: Punta di corno bovino
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 90g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2774C -
Viper - Senese Corno by Fabrizio "Silvester" Silvestrelli - V5740PC - regional knife
Knife typical of the city of Siena and the Tuscan countryside, in use since the first half of the nineteenth century. It is characterized by a blade with a typical scimitar or "French" shape.
Intended use: gentleman / collection
Type of production: Industrial
Lama production: Italy
Blade: 440A stainless steel 55 / 57HRC
Blade treatment: -
Handle: bovine horn horn tip (ATTENTION: since it is a natural material, the color may change with respect to the knife photographed)
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 17mm.
Balancing: -
Weight: 104g.
Closure: double retention spring on the internal liners
Clip: -
Sheath: suede leather bag with Viper logos
Packaging: black cardboard case with silver logos, warranty certificates
Notes: numbered copies with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli2770C -
Viper - Senese Olive Wood by Fabrizio "Silvester" Silvestrelli - V5740UL - Knife
Knife typical of the city of Siena and the Tuscan countryside, in use since the first half of the nineteenth century. E 'characterized by a blade with typical shape of a scimitar, or "French".
Intended use: gentleman / collection
Type of production: Industrial
Production Blade: Italy
Blade: 440A stainless steel 55/57HRC
Treatment Lama: -
Handle: olive wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 17mm.
Balance: -
Weight: 104g.
Clasp: double-retention spring on the inner liners
Clip: -
Sheath: leather suede bag with logos Viper
Packaging: box of black cardboard with silver logos, warranty certificates
Notes: numbered copies with a limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli2770U -
Viper - Vernante Corno by Fabrizio "Silvester" Silvestrelli - V5748CO - regional knife
A typical Piedmontese knife originating from the village of Vernante, in the province of Cuneo, in use since the beginning of the 19th century also in nearby Liguria. It is characterised by a forged button on the upper part of the blade's heel, which allows it to fit into the hollow of the handle with the blade open, acting as a stop.
Intended use: Regional/Collection/Sporting
Type of production: Industrial
Blade Production: Italy
Blade: Stainless steel 440A 55/57HRC
Blade Treatment: -
Handle: Bovine horn tip
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 200mm.
Thickness when closed: -
Balance: -
Weight: 100g.
Closure: Double retention spring on inner liners
Clips: -
Sheath: Suede leather pouch with Viper logos
Packaging: black cardboard case with silver logos, warranty certificates
Notes: numbered examples with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli2837CO -
Viper - Vernante Palissandro by Fabrizio "Silvester" Silvestrelli - V5748PA - coltello regionale
Coltello tipico piemontese originario del paese di Vernante, in provincia di Cuneo, in uso sin dall’inizio dell’ottocento anche nella vicina Liguria. E' caratterizzato da un bottone forgiato sulla parte superiore del tallone della lama che ne permette l’alloggiamento nell’incavo del manico a lama aperta, fungendo da battuta.
Destinazione d'uso: Regionale/Collezione/Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox 440A 55/57HRC
Trattamento Lama: -
Manicatura: Legno di Palissandro
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 113mm.
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 100g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2837PA -
Fallkniven - FH9 Braun Micarta - Knife
Type of production: Industrial
Blade: 3G laminated steel three-layer (VG2 SGPS and "Super Gold Powder Stainless Steel" to 62 HRC)
Blade treatment: -
Production Lama: Sweden
Handle: Stainless Steel 420J2 and brown micarta
Blade length: 67mm.
Blade Thickness: 3mm.
Closed Length: 90mm.
Overall length: 157mm.
Weight: 90g.
Closing: Lockback
Clips: stainless steel
Notes: -F-FH9 -
Fallkniven - Phantom - Elmax & Desert Ironwood 40th Anniversary Set - Limited Edition - knife
Fällkniven AB celebrates its 40th anniversary in the international knife market with The Fällkniven Phantom model, a folding knife that is not only aesthetically appealing but also functional, with well-balanced proportions between handle and blade.
The blade uses advanced Swedish powdered steel (Elmax from Uddeholm), equipped with a convex edge for maximum performance. The handle is made of ironwood harvested in the southwestern United States, known for its density (1.2 kg/dm³) that makes it heavy and strong enough not to float.
The design of the Phantom follows the Scandinavian principle of "Form follows function," favoring clean, classic lines without superfluous details.
The Phantom comes in a gift box with a multifunctional leather case with a belt clip that can be worn either horizontally or vertically.
Intended use: sports/hunting/utility
Blade: 61/62HRC Elmax stainless steel, satin-finished, with convex sharpening
Handle: stainless steel and desert ironwood
Blade length: 73mm.
Blade thickness: 3mm.
Length when closed: 101mm.
Total length: 174mm.
Weight: 77g.
Locking system: Liner Lock
Sheath: leather, with metal clip
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard caseF-PHanniv -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Fox - Anzu by Les George - PVD Stonewashed MagnaCut & G10 - FX-560 G10B - pocket knife
Les George designed the ANZU to have maximum handle ergonomics, ensuring a firm grip, MAGNACUT drop point blade maximizes cutting capacity and steel corrosion resistance. The VERSO Lock opening mechanism gives this knife maximum efficiency. Dual thumb pins and VERSO lock make the knife easy to open and close with both hands. The clip allows for easy carrying, making the knife always ready for use.
Intended Use: Tactical/SportingType of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: Black Stonewashed PVD
Handle: G10 with internal stainless steel folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm.
Weight: 113g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stainless steel Black Idroglider
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560G10B -
Fox - Anzu by Les George - MagnaCut & Blue Aluminum - FX-560 ALOR - knife
ANZU is the new knife from Fox Knives inspired by the creature of the Mesopotamian religions; a powerful figure who challenged the authority of the gods by stealing from the god Enlil the Table of Destinies, an object that, when possessed, confers the power to control the Universe. Through this act of rebellion, Anzu became an example of power, strength, precision and determination, characteristics that also distinguish the new Fox Knives knife designed by Les George.
Intended Use: SportingType of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: stone washed
Handle: anodized aluminum with internal stainless steel folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 120g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stonewashed stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560ALOR -
Laguiole En Aubrac - Ebony and Mammoth Fossil Ivory - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless steel Sandvik 12C27
Country of manufacture: France
Handle: ebony wood with mammoth fossil ivory insert
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L-ENEBAVFM -
Francesco Pachi - Custom Folder knife - BG42 & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: in like new condition
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: lacking certificate and packaging.
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Type of production: Handcrafted unique piece by Francesco Pachì made at the direct request of a customer
Country of production: Italy
Blade: stainless steel BG-42 with gold plated opening pin set with hard stone
Handle: gold-plated internal folders, satin-finished stainless steel heads, red micarta spacer, Loveless micarta handle and gold-plated hardware
Blade length: 57mm.
Blade thickness: 3mm.
Total length: 136mm.
Weight: 57g.
Sheath: lizard skin knife pouch
Locking system: Liner Lock
Notes: knife withdrawn from private collectionAP-LF-CP -
La Cantina - Coda Di Lupo Custom Knife - RWL34 & Snakewood - Custom Knife
Type of production: Artisan
Country of production: Italy
Blade: RWL34 stainless steel at 60HRC
Blade finish: Satin finish
Handle: Snakewood with white G10 fibres, steel edges and titanium spacer
Blade length: 85mm.
Blade thickness: 3.2mm.
Total length: 198mm.
Closed length: 115mm.
Weight: 105g.
Locking system: liner lock
Clip: removable, titanium
Packaging and certificate: cordura case and certificate of authenticity
Notes: unique knife handcrafted for Coltelleria Collini in Busto Arsizio - n. 310LC-CDL-SW -
SOG - Terminus XR G10 Crimson Red Knife - TM1023-BX - D2 - knife
This is a knife designed to excel in the EDC (Everyday Carry) role. It has the right size, shape, and look for EDC.
Destinazione d'uso: collection / tactical / military
Tipo di produzione: industrial
Lama: D2 steel 60-61 HRC
Finitura lama: Stonewashed
Impugnatura: G10
Lunghezza lama: 74mm.
Spessore della lama: 4mm.
Lunghezza totale: 180mm.
Bilanciatura: arretrata
Peso: 90g.
Clip: reversibile
Note: -S-TM1023-BX -
Medford Knife and Tool - Praetorian Slim - S45VN Tanto Tumbled Blade, Blue Handles - MK208 - knife
With a blade just over 3mm thick and a titanium handle that is 11mm thick overall, this turns out to be one of our most pocket-friendly EDC knives, opening up a whole new market segment for us: the business class. These are customers who want to carry a Medford in their dress pants, lingerie, holster or purse, but when opened have the same familiarity as the sturdier Medfords. These are true EDC knives, highly portable and reliable!
Intended Use: Sporting / EDC
Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Tumbled & Satin
Handle: Anodized titanium with flamed hardware
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 11mm.
Weight: 106g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK208STT -
Medford Knife and Tool - Slim Midi - MagnaCut Tumbled DP Blade, Flamed Handles - MK201 - knife
With a blade just over 3mm thick and a titanium handle that is 11mm thick overall, this turns out to be one of our most pocket-friendly EDC knives, opening up a whole new market segment for us: the business class. These are customers who want to carry a Medford in their dress pants, lingerie, holster or purse, but when opened have the same familiarity as the sturdier Medfords. These are true EDC knives, highly portable and reliable!
Intended Use: Sporting / EDC
Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-MagnaCut steel
Blade finish: Tumbled & Satin
Handle: handcrafted flamed titanium
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 201mm.
Thickness when closed: 11mm.
Weight: 115g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK201MTD -
MKM - Eclipse by Vox - Satin MagnaCut & Dark Matter Blue Titanium - EL-BLCF - Knife
Eclipses indicate significant periods of change and transformation.
While a solar eclipse opens the portal to new beginnings and changes,
a lunar eclipse reveals energies that help us complete a journey or change course in some way...
Either way, follow the light beyond the darkness!
Intended Use: Sporty
Production type: Industrial
Country of manufacture: Italy
Blade: MagnaCut steel HRC 61/63
Blade treatment: Satin finish
Handle: Titanium Gr.5 Ti6AI4V with anodizing and Fat Carbon Dark Matter
Blade Length: 81mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 191mm.
Weight: 90g.
Closure: FrameLock
Clip: anodized titanium, deep pocket, removable
Sheath: zippered nylon pouch
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VoxnaesMK-EL-BLCF -
MKM - Eclipse by Vox - Dark Stonewash MagnaCut & Dark Matter Bronze Titanium - EL-BRCFD - Knife
Eclipses indicate significant periods of change and transformation.
While a solar eclipse opens the portal to new beginnings and changes,
a lunar eclipse reveals energies that help us complete a journey or change course in some way...
Either way, follow the light beyond the darkness!
Intended Use: Sporty
Production type: Industrial
Country of manufacture: Italy
Blade: MagnaCut steel HRC 61/63
Blade treatment: Dark Stonewashed
Handle: Titanium Gr.5 Ti6AI4V with anodizing and Fat Carbon Dark Matter
Blade Length: 81mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 191mm.
Weight: 90g.
Closure: FrameLock
Clip: anodized titanium, deep pocket, removable
Sheath: zippered nylon pouch
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VoxnaesMK-EL-BRCFD -
MKM - Miura - M390 Button Lock - Titanium Total Black - MI-TDSW - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade Finish: Black PVD Stonewashed
Handle: Titanium Gr. 5 Ti6AI4V Black PVD Stonewashed with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-TDSW -
MKM - Miura - M390 Button Lock - Titanium Bronze - MI-TBR - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-TBR -
MKM - Miura - M390 Button Lock - Titanium Grey - MI-T - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-T -
ExtremaRatio - Ferrum Rescue multi tool - Red - knife
Ferrum Rescue is a tool designed for rescue operations, developed in collaboration with my friend Andrea Micheli, military and law enforcement expert, journalist and shooting instructor. Made with a very compact handle, this rescue tool is equipped with 3 blades, each of which has a specific function:
The first and main blade has a thickness of 3 millimeters and is designed to be used for more demanding purposes and to protect the cutting edge of the other two from premature wear. The teeth allow it to cut larger ropes or textile materials, the remaining smooth part has the classic function of a knife. The second blade is a scalpel, which can be used for extremely precise cuts and for emergency first aid interventions. The third blade, on the back of the first, is the smallest of the 3, it has the function of cutting lines, capable of cutting paracord and aramid material.
The interaction of the main blade with the scalpel allows the operator to make a quick emergency cut to free any injured person from his or her clothing.
The line cutter blade and the scalpel are both interchangeable.
Ferrum Rescue has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system. On the back there is also a hard metal glass breaker.
Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the operator to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.
The reversible clip is positioned on the back.
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 56mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 170mm. (18mm. INCLUDING SCALPEL BLADE)
Weight: 85g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-FE-RR -
Benchmade - Bugout Axis - Flat Dark Earth & Crater Blue - 535FE-05 - knife
The Bugout® is designed for the modern outdoor adventurer, incorporating the lightest, highest-performance materials into an extremely slim, ergonomic package. The CPMS30V blade steel and Benchmade's AXIS assisted locking technology can tackle any task. Made in the United States.
Intended Use: Sporting / EDC
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC
Blade Finish: Flat Dark Earth Cerakote
Handle: CF-Elite (Grivory)
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logosBM-535FE-05 -
Kershaw - Iridium - DuraLock KVT Knife - 2038 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: Anodized aluminum
Blade length: 81mm.
Blade thickness: 2.7mm.
Length closed: 114mm.
Total length: 200mm.
Thickness when closed: 12.5mm.
Weight: 94g.
Opening: via ambidextrous pins placed on the blade
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opens on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)K2038 -
ExtremaRatio - BF3 knife - Dark Talon - Afghanistan Edition - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - Limited Edition supplied by Extrema Ratio for Task Force 45 (TF-45) joint military unit of Italian special forces, operating in Afghanistan from at least June 2006 to 2016, as part of Operation "Sarissa" of the International Security Assistance Force (ISAF).
* Conditions: Like new
* Commercially available No in the version with engraving -
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: YES
* Sheath: -
* Manuals, Certificates and Guarantees: YES
* Checked and Certified by our internal laboratoryIntended use: Sport / Tactical
Type of production: Industrial
Blade production: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Testudo
Handle: Anticorodal
Blade length: 125mm.
Blade thickness: 3mm.
Closed length: 150mm.
Total length: 270mm.
Closed thickness: 17mm.
Balancing: -
Weight: 120g.
Closure: Liner Lock
Clip: removable in stainless steel
Scabbard: -
Packaging: cardboard box with Extrema Ratio logos
Note: -AP-ER-BF3-A -
Puma - Jagdmesser Falknersheil - Falconer's Knife - 3592 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory sharpened, improvable
* Marks on blade: No
* Marks on handle: Slight, on nickel silver heads.
* Box: Absent
* Scabbard: Original, leather, with a few small marks due to age.
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
Particular knife developed with the help of experienced falconers and especially Horst Niesters in the early 1970s.
The blade was designed to chop up food for raptors and to intercept game brought back by raptors during hunting trips. In the center of the blade is a small semicircular notch that serves to signal to the falconer that the edge is sharp from the tip of the blade to that exact point; the rest of the blade is kept blunt to protect the raptors.
PUMA's falconer's knife is designed to be very handy and absolutely practical, making it a reliable companion for hunting prey.
Intended Use: Collection / Vintage / Hunting
Type of production: semi-crafted
Country of manufacture: Germany
Blade: 440C stainless steel
Blade finish: satin-finished
Handle: wooden, with nickel silver guard and pommel
Blade length: 125mm.
Blade thickness: 3mm.
Total length: 242mm.
Balance: backward
Weight: 130g.
Sheath: leather
Packaging: -
Notes: Vintage 1970s knife - Withdrawn from private collection - Overall in very good conditionPU-FALK-CP -
Andrew Demko - AD 20.5 Shark-Lock - DLC Clip Point Black - knife
Intended Use: Sport/Utility
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Black DLC
Handle: Grivory
Blade length: 82mm.
Blade thickness: 3.2mm.
Total length: 195mm.
Weight: 101g.
Closure: Shark-Lock
Clip: stainless steel
Sheath: -
Packaging: clear plastic box with Demko logos
Notes: Design by Andrew DemkoDEMAD205F15B -
Andrew Demko - AD 20.5 Shark-Lock - Stonewashed Clip Point Black - knife
Intended Use: Sport/Utility
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Grivory
Blade length: 82mm.
Blade thickness: 3.2mm.
Total length: 195mm.
Weight: 101g.
Closure: Shark-Lock
Clip: stainless steel
Sheath: -
Packaging: clear plastic box with Demko logos
Notes: Design by Andrew DemkoDEMAD205F12 -
Spyderco - Endura 4 Flat Plain Knife - K390 Blue FRN - C10FPK390 - knife
Intended Use: Sporting
Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC10FPK390 -
RKP - Tunturi Puukko - COLLEZIONE PRIVATA - Knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in fair condition, marks on the blade due to use and years since its production
* Commercially available: no longer in production, difficult to find, probably dating back to the 1980s or 1990s
* Sharpening: not original, the knife has been used and resharpened
* Marks on the blade: scratches, logo a little discoloured, dots due to cleaned oxidation
* Marks on the handle: yes, due to use and insertion in the sheath
* Box: unboxed
* Scabbard: original, leather and fur (presumably reindeer)
* Manuals, Certificates and Warranties: absent
* Checked and certified by our in-house laboratoryIntended use: hunting/collecting
Type of production: handcrafted
Blade: Sandvik 12C27 stainless steel
Blade treatment: polishing
Country of manufacture: Finland
Handle: bone (presumably reindeer)
Blade length: 100mm
Blade thickness: 3mm
Length closed: -
Total length: 200mm
Balance: set back approx. 10mm
Weight: 82g (121g including scabbard)
Scabbard: leather with engravings
Notes: in view of the time that has elapsed and the difficulty of finding reliable production information, the above data are to be considered indicativeAP-RKP -
Laguiole En Aubrac - Raw Buffalo Horn with Damascus Steel Blade - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless damasci steel
Country of manufacture: France
Handle: raw buffalo horn
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0512CBI/FDBI1 -
Fox - Chnops by Gobbato - FX-543DBL - Damasteel and PVD Titanium - knife
Intended use: sporting/collection
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel damsco Damasteel DS93X Gysinge 62/64HRC
Blade finish: -
Handle: Stonewashed PVD titanium
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm.
Weight: 105g.
Locking mechanism: Liner Lock
Clip: removable and reversible, purple oxidized titanium
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo GobbatoFX-543DBL -
Emerson - Mini A-100 - Black G10 - MINIA100SF - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Yes, but only in stonewashed "Thunderstorm" finish.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel 154CM
Blade finish: dual tone (satin and stone washed)
Country of manufacture: USA
Handle: G10 and titanium liners
Blade length: 76mm.
Blade thickness: 3.2mm.
Length closed: 104mm.
Total length: 183mm.
Weight: 114g.
Closure: Liner Lock
Clip: removable, stainless steel
Notes: Collected specimen from private collection, absolutely like newAP-EM-MA100 -
Spyderco - Assist Knife - C79BK - PRIVATE COLLECTION - knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Discontinued as of 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, but without label and with signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: No
* Checked and certified by our internal laboratory
Intended use: SportingType of production: industrial
Blade: stainless steel VG-10
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 94mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 115g.
Closure: Back Lock
Clip: Removable, double positioning, stainless steel
Notes: Version remained in production approximately from 2004 to 2019 - specimen withdrawn from private collection, overall in good condition. Equipped with retractable glass breaker and whistle integrated in the handle.AP-C79BK -
Viper - Twin FCG - Slipjoint by Fabrizio Silvestrelli - M390 - Dark Matter Gold - V6002FCG - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium insignia, Dark Matter Gold carbon fibre grips
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 176mm.
Thickness when closed: 10mm.
Weight: 77g.
Closure: Slipjoint
Sheath: Leather
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV6002FCG -
Laguiole En Aubrac - Horn point - spring engraved with Maltese cross - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Maltese cross symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Stainless steel 12C27
Blade production: France
Handle: Blond cow horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -LEA-croce-m