Fantasy swords, historical swords, medieval swords, katanas
-
The Hobbit - Glamdring Sword - Gandalf's sword - UC2942 - fantasy sword
Glamdring was the sword forged for the Elven Lord Turgon in the First Age.
It has been lost for thousands of years, until it was found by Gandalf (along with Goad and Orcrist) in the Trolls' lair in The Hobbit, who kept it to himself, and continued to wear it throughout the events of the Lord of the Rings trilogy. .Glamdring is translated "Battenemici", and the orcs in The Hobbit disparagingly refer to it as "Hammer".
Glamdring, together with her twin Orcrist, come in The Hobbit as accompanied by splendid scabbards and with the handle richly decorated with jewels.
In the Unfinished Tales, one of the notes to Tuon's story was "... white and gold ... in an ivory sheath ..." Glamring bench is not mentioned, assuming it is the definite sword.Gandalf's official sword from The Hobbit movie and produced by United Cutlery
Details:
- Blade material: AUS-6 stainless steel
- Handle material: cast metal with leather cover
- Total length: 121 cm
- Blade length: 89.5 cm
- Wooden display plate
- Authenticity certificateUC2942 -
YariNoHanzo - Tanto Folded - YN210
YariNoHanzo - Tanto Folded - YN210
Blade: AISI 1060 HCS folded (damask) high carbon content
Hamon: Style note
Hi: -
Blade length (without habaki): 23,50cm.
Motohaba: 2.5cm.
Sakihaba: 2cm.
Sori: -
Blade thickness: 5mm.
Kissaki: 4,5cm.
Tsukamaki Length: 11.5cm.
Total length: 40cm.
Weight: 340g.
Balance: advanced, to 1cm
Saya: black painted wood
Handle: same Tsukagawa white with black cotton
Sageo: black cotton
Fuchi and Kashira: Brass
Habaki and Menuki: Brass
Seppa: Brass
Notes: -YN210 -
YariNoHanzo - NIOH Folded Katana - YNHR11 - katana
YariNoHanzo - NIOH Folded Katana - YNHR11 - katana
Blade: AISI 1060 HCS folded (damask) high carbon content - not sharpened
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 70,5cm.
Motohaba: 3.0cm.
Sakihaba: 2.4cm.
Sori: 2.0cm.
Blade thickness: 7 / 5mm.
Kissaki: 4.7cm.
Tsukamaki Length: 25cm.
Total length: 101,5cm.
Weight: 1168g.
Balance: advanced, at 11cm from tsuba
Saya: wood shiny black
Tsuka-ito: brown cotton on black samekawa
Sageo: brown cotton
Tsuba, Fuchi and Kashira: black metal
Habaki and Menuki: antique metal
Seppa: iron
Note: the sword is accompanied by cotton bagYNHR11 -
YariNoHanzo - Basic Iaito - YNHR14 - katana
YariNoHanzo - Basic Iaito - YNHR14 - katana
Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 67cm.
Motohaba: 3.0cm.
Sakihaba: 2.1cm.
Sori: 2.0cm.
Blade thickness: 7 / 5mm.
Kissaki: 4.0cm.
Tsukamaki Length: 24,5cm.
Total length: 96cm.
Weight: 928G.
Balance: advanced to 11,5cm from tsuba
Saya: wood satin black
Tsuka-ito: cotton black on black samekawa
Sageo: black cotton
Tsuba, Fuchi and Kashira: antiqued metal
Habaki and Menuki: antique ametallo
Seppa: Brass
Note: the sword is accompanied by cotton bagYNHR14 -
YariNoHanzo - Dojo Plus Iaito - YNHR15 - katana
YariNoHanzo - Dojo Plus Iaito - YNHR15 - katana
Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 70,5cm.
Motohaba: 3.0cm.
Sakihaba: 2.1cm.
Sori: 2.0cm.
Blade thickness: 7 / 5mm.
Kissaki: 4.7cm.
Tsukamaki Length: 24cm.
Total length: 101.5cm.
Weight: 895g.
Balance: advanced to 10,5cm from tsuba
Saya: wood satin black
Tsuka-ito: cotton black on black samekawa
Sageo: black cotton
Tsuba, Fuchi and Kashira: antiqued metal
Habaki and Menuki: antique ametallo
Seppa: silver
Note: the sword is accompanied by cotton bagYNHR15 -
YariNoHanzo - Musashi Iaito - YNHR16 - katana
Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 70cm.
Motohaba: 3.0cm.
Sakihaba: 2.2cm.
Sori: 2.0cm.
Blade thickness: 7 / 5mm.
Kissaki: 4.7cm.
Tsukamaki Length: 24cm.
Total length: 101.0cm.
Weight: 904g.
Balance: advanced, at 12cm from tsuba
Saya: wood satin black
Tsuka-ito: cotton black on black samekawa
Sageo: black cotton
Tsuba, Fuchi and Kashira: antiqued metal
Habaki and Menuki: silver
Seppa: silver
Note: the sword is accompanied by cotton bagYNHR16 -
YariNoHanzo - Murasaki Practical Katana - YNHR8 - katana
YariNoHanzo - Dragonfly Katana - YNHR5 - katana
This sword is part of the "Series R", an exclusive line, destined only to the best retailers YariNoHanzo Italian brand, designed for practitioners of Iaido, kendo and katori. The sword is removable and suitable for the practice; has balanced weight and good balance.
Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 70cm.
Motohaba: 3.0cm.
Sakihaba: 2.2cm.
Sori: 2.5cm.
Blade thickness: 8 / 5mm.
Kissaki: 4.5cm.
Tsukamaki Length: 25cm.
Total length: 101.0cm.
Weight: 1104g.
Balance: advanced, at 11cm from tsuba
Saya: wood shiny black
Tsuka-ito: cotton black on white samekawa
Sageo: black cotton
Tsuba, Fuchi and Kashira: antiqued metal
Habaki and Menuki: Copper
Seppa: Copper
Note: the sword is accompanied by cotton bagYNHR5 -
YariNoHanzo - Practical Musashi Katana - YNHR9 - katana
YariNoHanzo - Practical Musashi Katana - YNHR9 - katana
This sword is part of the "Series R", an exclusive line, destined only to the best retailers YariNoHanzo Italian brand, designed for practitioners of Iaido, kendo and katori. The sword is removable and suitable for the practice; has balanced weight and good balance.
Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 68cm.
Motohaba: 3.2cm.
Sakihaba: 2.3cm.
Sori: 2.5cm.
Blade thickness: 8 / 5mm.
Kissaki: 5cm.
Tsukamaki Length: 24cm.
Total length: 98.5cm.
Weight: 1122g.
Balance: advanced to 10,5cm from tsuba
Saya: wood shiny black
Tsuka-ito: cotton black on white samekawa
Sageo: black cotton
Tsuba, Fuchi and Kashira: black metal
Habaki and Menuki: silver
Seppa: silver
Note: the sword is accompanied by cotton bagYNHR9 -
YariNoHanzo - Tsuru Red Katana - YNHR6 - katana
YariNoHanzo - Tsuru Red Katana - YNHR6 - katana
This sword is part of the "Series R", an exclusive line, destined only to the best retailers YariNoHanzo Italian brand, designed for practitioners of Iaido, kendo and katori. The sword is removable and suitable for the practice; has balanced weight and good balance.
Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 70cm.
Motohaba: 3.0cm.
Sakihaba: 2.3cm.
Sori: 2.5cm.
Blade thickness: 8 / 5mm.
Kissaki: 4.9cm.
Tsukamaki Length: 25cm.
Total length: 101.5cm.
Weight: 1058g.
Balance: advanced to 13,5cm from tsuba
Saya: wood shiny black
Tsuka-ito: cotton red on white samekawa
Sageo: cotton red
Tsuba, Fuchi and Kashira: antiqued metal
Habaki and Menuki: Copper
Seppa: Copper
Note: the sword is accompanied by cotton bagYNHR6 -
YariNoHanzo - Practical Katana Dojo - YNHR7 - katana
YariNoHanzo - Practical Katana Dojo - YNHR7 - katana
This sword is part of the "Series R", an exclusive line, destined only to the best retailers YariNoHanzo Italian brand, designed for practitioners of Iaido, kendo and katori. The sword is removable and suitable for the practice; has balanced weight and good balance.
Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 70cm.
Motohaba: 3.1cm.
Sakihaba: 2.2cm.
Sori: 2.5cm.
Blade thickness: 7 / 5mm.
Kissaki: 4.7cm.
Tsukamaki Length: 24cm.
Total length: 101.5cm.
Weight: 1090g.
Balance: advanced, at 11cm from tsuba
Saya: wood satin black
Tsuka-ito: cotton black on black samekawa
Sageo: black cotton
Tsuba, Fuchi and Kashira: antiqued metal
Habaki and Menuki: silver
Seppa: silver
Note: the sword is accompanied by cotton bagYNHR7 -
YariNoHanzo - Musashi Kuroi Katana - YNHR4 - katana
This sword is part of the "Series R", an exclusive line, destined only to the best retailers YariNoHanzo Italian brand, designed for practitioners of Iaido, kendo and katori. The sword is removable and suitable for the practice; has balanced weight and good balance.
Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 69.5cm.
Motohaba: 3.0cm.
Sakihaba: 2.2cm.
Sori: 2.5cm.
Blade thickness: 8mm.
Kissaki: 4.7cm.
Tsukamaki Length: 25cm.
Total length: 100.5cm.
Weight: 1064g.
Balance: advanced, at 13cm from tsuba
Saya: black lacquered wood
Tsuka-ito: cotton black on white samekawa
Sageo: black cotton
Tsuba, Fuchi and Kashira: golden metal
Habaki and Menuki: Copper
Seppa: Copper
Note: the sword is accompanied by cotton bagYNHR4 -
YariNoHanzo - Murasaki Practical Katana - YNHR8 - katana
This sword is part of the "Series R", an exclusive line, designed to the very best retailers Italian brand YariNoHanzo, designed for practitioners of Iaido, Kendo and katori. The sword is removable and suitable for practice; has balanced weight and good balance.
Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 71.5cm.
Motohaba: 3.2cm.
Sakihaba: 2.2cm.
Sori: 2.5cm.
Blade thickness: 8 / 5mm.
Kissaki: 4.5cm.
Tsukamaki Length: 24cm.
Overall Length: 98.5cm.
Weight: 1076g.
Balance: advanced to 11cm from tsuba
Saya: black satin wood
Tsuka-ito: Cotton Purple on black samekawa
Sageo: cotton purple
Tsuba, Fuchi and Kashira: antique metal
Habaki and Menuki: copper
Seppa: copper
Note: The sword is accompanied by cotton bagYNHR8 -
YariNoHanzo - Nokon Practical Katana - YNHR1 - katana
This sword is part of the "Series R", an exclusive line, designed to the very best retailers Italian brand YariNoHanzo, designed for practitioners of Iaido, Kendo and katori. The sword is removable and suitable for practice; has balanced weight and good balance.
Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 72.5cm.
Motohaba: 3.2cm.
Sakihaba: 2.2cm.
Sori: 2.5cm.
Blade thickness: 8 / 5mm.
Kissaki: 4.5cm.
Tsukamaki Length: 24.5cm.
Total Length: 101cm.
Weight: 1098g.
Balance: advanced, at 13.5cm from tsuba
Saya: black painted wood
Tsuka-ito: cotton blue on a white samekawa
Sageo: blue cotton
Tsuba, Fuchi and Kashira: antique metal
Habaki and Menuki: copper
Seppa: copper
Note: The sword is accompanied by cotton bagYNHR1 -
Marto - Wakizashi Edo Ceremonial 160 - resin - oriental sword
Faithful reproduction of the ceremonial Wakizashi dating back to the Japanese Edo period. Precisely carved and chiseled resin scabbard, tsuba and hilt depicting rural scenes.
Blade: not sharpened in 440 stainless steel
Blade length (including habaki): 50.7cm.
Sori: 2.4cm
Blade thickness: 6mm.
Kissaki: 2.5cm.
Total length: 73cm.
Weight: 832g. (without sheath) - 1324g. (including scabbard)
Balance: advanced, at 1cm
Handle: resin
Sheath: in resinSmall technical glossary: Hamon: temper line on the blade * Hi: deep groove in the blade, also called blood-cola * Saya: sword sheath * Tsuka: handle * Tsukamaki: weave on the handle * Tsuka-Ito or Tsuka-gawa: webbing cotton, silk or leather that wraps the handle * Tsuba: guard * Fuchi: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which the Sageo is linked * Motohaba: height of the habaki blade * Sakihaba: height of the kissaki blade.
MA-160 -
The Hobbit - Miniatura Spada di Thorin Scudodiquercia - apri lettere NN1207 - prodotto ufficiale
The Hobbit - Riproduzione in scala 1:3 della spada di Thorin Oakenshield utilizzata nel film "The Hobbit"
Lama: Acciaio Inossidabile 420J2
Supporto: confezione in legno
Lunghezza spada: 19 cm.
Prodotto accompagnato dalla licenza ufficiale "Lord of the Rings" della New Line CinemaNC-07 -
Cold Steel - Bokken in Polipropilene - 92BKKC - spada da allenamento
Rivoluzionario Bokken realizzato in Polipropilene che sostituisce i tradizionali e costosissimi Bokken in legno giapponese.
Peso, dimensioni e bilanciatura reali per trasmettere il massimo delle sensazioni a chi lo impugna ma unito ad una resistenza senza eguali.
Materiale: Polipropilene
L.lama: cm.76,2
L.tot.: cm.105,4CS92BKKC -
Cold Steel - Wakizashi Bokken in Polipropilene - 92BKKB - spada da allenamento
Rivoluzionario Bokken corto, realizzato in Polipropilene per sostituire i tradizionali e costosissimi Bokken giapponesi in legno.
Peso, dimensioni e bilanciatura reali per trasmettere il massimo delle sensazioni a chi lo impugna, il tutto unito ad una resistenza senza eguali.
Materiale: Polipropilene
L.lama: cm.53 L.tot.: cm.69,2
Peso.: gr.325
Note: dotato di tsuba smontabileCS92BKKB -
Forgotten Dreams - spada in lattice Chaos Gladius 2nd Edition
Le armi Forgotten Dreams, sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo da vivo.
Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato.
Robusta spada bastarda, bilanciata e maneggevole
- Caratteristiche
materiali: tubo in fibra di carbonio rivestito con schiuma poliuretanica ad alta densita
Lunghezza Totale: 60cm.6925 -
Forgotten Dreams - spada in lattice Elven Katana 2nd Edition
Le armi Forgotten Dreams, sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo da vivo.
Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato.
Robusta spada bastarda, bilanciata e maneggevole
- Caratteristiche
materiali: tubo in fibra di carbonio rivestito con schiuma poliuretanica ad alta densita
Lunghezza Totale: 105cm.6927 -
Fox - Folding Spade - shovel military tactics - FX-0171111
Tactical folding spade and with 3 different positions of inclination of the blade
Specifications:
- Blade of the spade: stainless steel AISI 420 coated
- Overall length open: 60cm.
- Length closed: 26 x 17cm.
- Length only blade: 22cm.
- Width only blade: 15.5 cm.
- Handle material: Polymer
- Thickness: 2.5mm
- Weight: 1214g.
- Sheath: Cordura soft attacksFX-0171111 -
Iaito - Professional - YNH39 - Japanese Katana
Sword removable fit to practice with balanced weight and good balance. Good level of finish and quality / price ratio.
Blade: carbon steel 1060 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 73.5cm. (including habaki) - 71cm. (habaki not included)
Motohaba: 3cm.
Sakihaba: 1.9cm.
Sori: 2.5cm.
Blade thickness: 6mm.
Kissaki: 4.8cm.
Tsukamaki Length: 25cm.
Total Length: 103cm.
Weight: 972g. (1228g. With saya)
Balance: advanced to 9cm from tsuba
Saya: black lacquered wood
Tsuka-ito: black silk same color white
Sageo: black silk
Tsuba, Fuchi and Kashira: antiqued metal
Habaki, Menuki, Seppa and Shitodome: Metal
Koiguchi, Kojiri, Kurigata: Buffalo horn
Note: the sword is accompanied by bag in cotton
Piccolo glossario tecnico: Hamon: linea di tempra sulla lama * Hi: profondo solco nella lama, detto anche colasangue * Saya: fodero della spada * Tsuka: impugnatura * Tsukamaki: intreccio sull'impugnatura * Tsuka-Ito o Tsuka-gawa: fettuccia di cotone, seta o pelle che avvolge l'impugnatura * Tsuba: guardia * Fuchi: ornamento tra guardia e manicatura * Kashira: ornamento alla fine della manicatura * Menuki: medaglioni posti sotto il cordame della manicatura * Habaki: collare che fascia l'inizio della lama * Seppa: guarnizioni della guardia * Shitodome: guarnizioni alle quali è legato il Sageo * Motohaba: altezza della lama all'habaki * Sakihaba: altezza della lama al kissaki.8212 -
Katana - Shirasaya - YNH29 - Japanese sword
Blade: 1060 steel with high carbon content not sharpened
Hamon: in style to notice
Hi: bo-hi
Blade length: 70.5cm. (72.5cm with habaki)
Total length: 100.5cm.
Blade thickness: 8mm.
Weight: 910g.
Saya and handle: light wood and buffalo horn
Tsuka-Ito and Sageo: absent
Tsuba, Fuchi and Kashira: absent
Menuki, Seppa and Shitodome: absent
Habaki: Copper
Note: -
Piccolo glossario tecnico: Hamon: linea di tempra sulla lama * Hi: profondo solco nella lama, detto anche colasangue * Saya: fodero della spada * Tsuka: impugnatura * Tsukamaki: intreccio sull'impugnatura * Tsuka-Ito o Tsuka-gawa: fettuccia di cotone, seta o pelle che avvolge l'impugnatura * Tsuba: guardia * Fuchi: ornamento tra guardia e manicatura * Kashira: ornamento alla fine della manicatura * Menuki: medaglioni posti sotto il cordame della manicatura * Habaki: collare che fascia l'inizio della lama * Seppa: guarnizioni della guardia * Shitodome: guarnizioni alle quali è legato il Sageo * Motohaba: altezza della lama all'habaki * Sakihaba: altezza della lama al kissaki.YNH29 -
Marto - Conan - Father's Sword Collectors Edition - spada fantasy
Riproduzione "Collectors Limited Edition" Marto della spada ufficiale del padre di Conan, tratta dal film "Conan il Barbaro"
Lama in acciaio 440 con impugnatura in cuoio, precisa cesellatura dell'elsa in bronzo con profonde incisioni sulla lama.
Lunghezza lama: 73 cm
Lunghezza totale: 96 cm
Peso: 2.5 kg circa
Corredata di scatola in legno con lacci di cuoio e certificati di autenticità.3217 -
Museum Replicas Windlass - Conan - Father Sword Bronze - 884017 - fantasy sword
Faithful official reproduction of Conan's Father's sword, taken from the movie "Conan the Barbarian"
Handcrafted by Windlass Steelcrafts® expert blacksmiths
- Blade in 1085 high carbon steel hardened to 52 HRC
- handle: in leather with knob and finely chiseled bronze hiltBlade length: 72 cm
Total length: 96
Weight: about 2.36 kg
Blade thickness: 4mm
Edition accompanied by certificates of authenticity.© 2011 Conan Properties International, LLC. Conan ®, Conan the Barbarian ®, and all related logos, characters, names, and distinctive likenesses thereof are trademarks of Conan Properties International LLC unless otherwise noted. All Rights Reserved. Museum Replicas Limited Authorized User.
884017 -
YariNoHanzo - Musashi Wakizashi - YNHR4W - wakizashi
YariNoHanzo - Musashi Wakizashi - YNHR4W - wakizashi
Blade: carbon steel 1060 - Blunt
Hamon: style note, by acid treatment
Hi: -
Blade length: 38.0cm.
Motohaba: 3.cm.
Sakihaba: 2.2cm.
Sori: 1.5cm.
Blade thickness: 7 / 4.5mm.
Kissaki: 4,56cm.
Tsukamaki Length: 11,5cm.
Total length: 57cm.
Weight: 686G.
Balance: advanced to 6cm from tsuba
Saya: black lacquered wood
Tsuka-gawa: black leather of same color white
Sageo: black cotton
Tsuba, Fuchi and Kashira: antiqued metal
Habaki, Menuki, Seppa and Shitodome: Copper
Note: the sword is accompanied by bag in cottonYNHR4W -
Tanto - Folded Performance Damascus - YNHR13T - Oriental swords
Production: semi-crafted
Blade: sharpened in high carbon AISI 1060 HCS folded steel (damascus)
Hamon: Noted style
Hi: -
Blade length (without habaki): 26cm.
Motohaba: 2.5cm.
Sakihaba: 2cm.
Sori: -
Blade thickness: 6mm.
Kissaki: 4.0cm.
Tsukamaki length: 8.5cm.
Total length: 40cm.
Weight: 326g. without scabbard - 448g. with scabbard
Balance: advanced, at 1cm
Saya: black painted wood
Handle: same black with black cotton tsukagawa
Sageo: black cotton
Fuchi and Kashira: brass
Habaki and Menuki: brass
Seppa: brass
Notes: -Small technical glossary: Hamon: tempering line on the blade * Hi: deep groove in the blade, also called colasangue * Saya: scabbard of the sword * Tsuka: handle * Tsukamaki: weave on the handle * Tsuka-Ito or Tsuka-gawa: webbing of cotton, silk or leather that wraps the handle * Tsuba: guard * Fuchi: ornament between guard and sleeve * Kashira: ornament at the end of the handle * Menuki: medallions placed under the handle's cordage * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which the Sageo is tied * Motohaba: height of the blade at habaki * Sakihaba: height of the blade at kissaki.
YNHR13T -
Tanto - DragonFly - YNHR5T - Same white and black cotton - oriental swords
Production: semi-craftmade
Blade: sharpened steel AISI 1060 high carbon content
Blade length (including habaki): 23,50cm.
Motohaba: 2.55cm.
Sakihaba: 2cm.
Sori: -
Blade thickness: 6mm.
Kissaki: 2.5cm.
Tsukamaki length: 9cm.
Total lenght: 35,3cm.
Weight: 348g. (without scabbard) - 442g. (including scabbard)
Balance: advanced, at 1cm
Saya: black varnished wood
Handle: same white with black cotton tsukagawa
Sageo: black cotton
Fuchi and Kashira: brass
Habaki and Menuki: brass
Seppa: brass
Notes: -Small technical glossary: Hamon: tempering line on the blade * Hi: deep groove in the blade, also called colasangue * Saya: scabbard of the sword * Tsuka: grip * Tsukamaki: weave on the grip * Tsuka-Ito or Tsuka-gawa: webbing of cotton, silk or leather that wraps around the grip * Tsuba: guard * Fuchi: ornament between guard and sleeve * Kashira: ornament at the end of the sleeve * Menuki: medallions placed under the cordage of the sleeve * Habaki: collar that wraps around the beginning of the blade * Seppa: trimmings of the guard * Shitodome: trimmings to which the Sageo is tied * Motohaba: height of the blade at the habaki * Sakihaba: height of the blade at the kissaki.
YNHR5T -
Citadel - Iaito Steel craft - DNH7 - selective hardening - practice sword
These handcrafted iaito stand out for their classic line and for their functional quality, which is well coupled with the traditional manufacturing techniques and the materials used.
The blades are carbon hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered to 60 HRC for excellent cutting, penetration and flexibility. The blade is then hand-polished on stone and the sword is finished in every single detail.Given the high craftsmanship nature of these swords, we would like to clarify that the photo is purely for illustrative purposes as designs of tsuba fuchi and kashira may differ from the one shown here as well as the weights and measures of the sword may differ, albeit slightly. .
Blade: in DNH7 steel with high carbon content with selective clay hardening 60 / 40HRC not sharpened
Hamon: irregular Gunome style
Hi: bo-hi
Blade length: 71.5cm.
Motohaba: 3cm.
Sakihaba: 2.2cm.
Sori1.5cm
Blade thickness: 5.5mm.
Kissaki: 3.5cm.
Tsukamaki length: 25.5cm.
Total length: 102.5cm.
Katana weight: 910g.
Weight with Saya: 1170g.
Balance: advanced, at 12.5cm. from Tsuba
Saya: black lacquered wood and buffalo horn
Tsuka-ito: -
Sageo: -
Tsuba: antiqued metal
Fuchi, Kashira, Menuki, Seppa and Shitodome: bronze
Country of production: Cambodia
Habaki: copper
Note: -
Small technical glossary: Hamon: temper line on the blade * Hi: deep groove in the blade, also called blood-cola * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: weaving in cotton, silk or leather that wraps around the handle * Tsuba: guard * Fuchi: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cord of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which the Sageo is linked * Sori: curvature of the bladeCI5106 -
Museum Replicas Windlass - Black sword - 501176 - Handcrafted Sword
"Forged by the dark elves, the sword was wielded by wood elves for hundreds of years until it was given to a man, since then it is called the" Black Sword. "Feared by orcs, dwarves, men and evil beasts, the sword bearer performed many great feats until his death while slaying a great evil dragon. "
The Blacksword fantasy sword features a burnished tempered carbon steel blade.
The guard and knob are made of cast metal, while the handle is made of wood wrapped in black leather. Includes a black leather sheath.
Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 80 cm.
Total length: 108cm.
Blade thickness: 5mm.
Weight: 1596 g.
Note: the blade is not sharp501176 -
Museum Replicas Windlass - Leif Erikson Sword - 501651 - Viking sword
Leif is believed to have been born around 970, second son of Erik the Red (Eiríkr Rauði), a Norwegian, son of Thorvald Asvaldsson, great grandson of Naddoddr, the discoverer of Iceland. His mother was Þjoðhildur. His father had founded two Viking colonies, the Western Settlement and the Eastern Settlement, in Greenland, a land to which he himself had given its name.
High carbon steel blade, robust and well white. The pommel and guard are richly carved and decorated with sea dragons and intertwined knots. The wooden handle is covered in black leather and features three knotted rings. The sword comes with a black leather scabbard with decorations and a leather belt.
Blade: 1065 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 74.5cm.
Blade thickness: 4mm.
Weight with scabbard: 1535g.
Sheath: leather with bronze mounts
Notes: the blade is not sharp501651 -
Museum Replicas Windlass - Sword of Robert the Bruce - 501495 - historical sword
Robert I Bruce was king of Scotland from 1306 to 1329. Of Norman and Scottish Gaelic ancestry, he was one of the greatest kings of Scotland, and also one of the most famous warriors of his era. He led Scotland against the Kingdom of England during the Scottish Independence Wars.
He was the great-grandson of David I of Scotland and was often at odds with the Scottish hero William Wallace.Sword characteristics:
- Total length: 110 cm
- Blade length: 92 cm
- Blade: in High Carbon Steel
- Handle: metal and leather
- Weight: 1.35 kg
- Thickness: 4 mm
- Accessories: sheath and belt in
- Blocking: 13cm from the guard branch501495 -
Museum Replicas Windlass - Centurion Gladius 501430 - Gladio - historical sword
Faithful reproduction of the Roman sword produced by Windlass
Blade: 1095 carbon steel
Handle: in wood and bronze
Blade length: 50cm.
Total Length: 71cm.
Blade thickness: 1.5mm.
Balancing: advanced
Weight: 765g.
Sheath: in leather, hand-sewn, with bronze finishes
Notes: balanced, perfect for exposition or historical re-enactment501430 -
Museum Replicas Windlass - Brass Two Hand Battle Sword 501010 - battle ready
After many requests, they’re here! We are glad to offer our new line of blunt swords and rapiers developed for the rigors of mock combat. Each blade is built to withstand a lot of use by reenactors or stage performers. Forged of high carbon steel that’s fully tempered. The edges and points are 3/16″ thick and rounded over for better nick resistance. These are crafted just like our regular swords – medieval swords have peened steel and brass parts, and stout wood grips covered with leather; rapiers have very tough, wire wrapped cast grips and threaded tang ends. All come with scabbards. Use at your own risk. Use proper safety precautions at all times. Two Hand Battle Swords-Overall 481/2″. Blade 381/2″ long, 21/8″ wide. Wt: 4 lbs., 4 oz.501010 -
Valyrian Steel - Needle - Sword of Arya Stark - Il Trono di Spade - Game of Thrones - spada
La Valyrian Steel Collection è una serie di riproduzioni con licenze ufficiali, di armi presenti nell'universo fantasy creato dai libri best-seller di George R.R. Martin. Ogni singolo prodotto è realizzato con i migliori materiali disponibili e con particolare attenzione alle finiture ed ai dettagli.
Needle - La spada di Arya Stark
Lama: non affilata, in acciaio inox 420J2, lunga 57cm.
Guardia e Pomolo: Metallo color ottone antichizzato
Impugnatura: Pelle
Supporto Espositivo: da muro, in legno
Lunghezza Totale: 77.5cm.
Arya Stark
Arya Stark nacque nel duecentottantanovesimo anno dopo la conquista del Continente Occidentale da parte di Aegon Targaryen; è la seconda figlia femmina di Eddard Stark e Catelyn Tully.
È descritta come una bambina magra ed atletica. Ha ereditato la fisicità degli Stark, avendo un viso allungato, gli occhi grigi e i capelli castani. La sua personalità ricorda inoltre quella della defunta zia paterna, Lyanna.VS0114€319.67Out of stock -
The Witcher - Sword of the Viper by Geralt of Rivia - Prop Replica
THE CHARACTER:
Geralt of Rivia, also called Gwynbleidd - white wolf in the ancient language of the Dryads - and nicknamed "The Butcher of Blaviken" is an witcher, protagonist of the saga of the same name set in the imaginary fantasy universe created by the Polish writer Andrzej Sapkowski.
From the famous series of books of which he is the protagonist were also drawn various media, including a film, a television series and a trilogy of international success.
THE SWORD:
Blade: 440C stainless steel without sharpening
Handle: black rope
Knob: in aluminum alloy
Guard: in steel
Blade length: 89.5cm
Total length: 124.5cm.
Sheath: in leather, with rigid insert, steel trim and belt for hooking
Packaging: cardboard box
Notes: Detailed replication of good quality, but not official, without original logos and licensesFL-9321.55€102.46Only 0 leftOut of stock -
The Witcher - Sword of the Wolf by Geralt of Rivia - Prop Replica
THE CHARACTER:
Geralt of Rivia, also called Gwynbleidd - white wolf in the ancient language of the Dryads - and nicknamed "The Butcher of Blaviken" is an witcher, protagonist of the saga of the same name set in the imaginary fantasy universe created by the Polish writer Andrzej Sapkowski.
From the famous series of books of which he is the protagonist were also drawn various media, including a film, a television series and a trilogy of international success.
THE SWORD:
Blade: 440C stainless steel without sharpening
Handle: brown rope
Knob: in aluminum alloy
Guard: in steel
Blade length: 89.5cm
Total length: 124.5cm.
Sheath: in leather, with rigid insert, steel trim and belt for hooking
Packaging: cardboard box
Notes: Detailed replication of good quality, but not official, without original logos and licensesFL-9320.55€102.46Only 0 leftOut of stock -
United - Blade DayWalker Stakes UC1431 con supporto - spada fantasy
Dotata di licenze ufficiali Marvel, l'esatta replica degli stakes utilizzata da Wesley Snipes nella trilogia dei film Blade
specifiche tecniche:
Include tre pali, guaina e display.
Lunghezza totale: 27 cm ciascuno
Materiale: alluminio lavorato lucidato a specchio, tappo terminale amovibile.
Fodero: regolabile, in vera pelle, nylon e piastre in acciaio inox con bordi smussati, elastico nero con chiusura in velcro, può essere fissato a una gamba o applicato al display.
Display: in legnoThe Marvel Comics character is personified on the big screen in the half-human, halfvampire character, Blade, played by Wesley Snipes, who is the result of a vampire attack on his mother before he was born. Possessing all the strengths of vampires but none of their weaknesses, his world is filled with the vampires he hates, and his quest in life and purpose for living is to rid the world of them - wherever he can find them. With the New Line Cinema releases of Blade,™ Blade2,™ and Blade: Trinity™ (in theaters December 8, 2004), United Cutlery has released a series of Blade™ Collectibles: DayWalker Stakes (UC1431), the Sword of the DayWalker (UC1401), the DayWalker Scabbard (UC1403), and the Glaive (UC1402). Each sold separately.
The Blade DayWalker Stakes are licensed reproductions of the props prominently featured in the Blade™ film. United Cutlery Brands, industry leader in fine movie knife and sword reproductions, has meticulously recreated the actual prop stakes, using the finest grade materials and craftsmanship of the highest quality available. The stakes are crafted of mirror-polished machined aluminum with a removable end cap. Includes a leather, nylon, and stainless steel sheath that holds all three stakes. Sheath can be worn around a leg or shown on the versatile wood display.
Specifications:
Includes three stakes, sheath, and display.
Overall length: 10-1/2" each
Stake Material: Mirror-polished machined aluminum, removable end cap.
Sheath: Adjustable, genuine leather, nylon, & stainless steel plates with chamfered edges, black elastic with velcro closure, can be worn around a leg or shown on the display.
Display: 9-5/8" x 7-3/4" x 3/4" wood, logo medallion, can be displayed on a table or mounted to a wall, includes mounting hardware, instructions.UC1431 -
United - Helm of Gondorian Infantry UC1414 - The Lord of the Rings - LOTR2 - spada fantasy
Edizione limitata 5000 pezzi
- Elmo a grandezza naturale realizzato il metallo e cuoio con ottime finiture e dettagli.
- Supporto in legno d'appoggio e certificato d'autenticità inclusi
Under the command of Gandalf the WhiteTM the men of Gondor defended Minas Tirith, the Kingdom of Gondor, from within the city walls against the siege of Sauron. Greatly outnumbered by Sauron´s armies, the Gondorian infantry did not stand a chance in open war. Miraculously, with the use of their trebuchets and archers, the Gondorian army held their own until the nine Nazgûl, upon their fell beasts, swooped in destroying the trebuchets and forcing men to flee their posts. This distraction allowed the trolls to push their siege towers in, unleashing scores of orcs onto the walls of the city, and allowing the release of Mordor´s greatest weapon - Grond, a 150 foot iron battering ram shaped like a wolf. The gates of the city would not hold, driving the Gondorians back into the third level of the city.
With much of the lower levels of Gondor in flames, it seemed as if it was on the verge of a catastrophic defeat, until suddenly the Riders of the Rohirrim appeared on the horizon, closing in and driving the armies of Mordor away from the city, thus ending the siege upon Gondor and entering into the Battle of the Pelennor fields. Although the Gondorians were technologically advanced compared to most races of Middle-earth, the design of the helm carries details reminiscent of Numenor. The barbut style helm - one piece, shoulder-length, and open-faced - finished off the suit of steel plate armor that a Gondorian infantryman wore. The smooth finish and flared bottom of the helm offered better neck protection, allowing blows to be deflected away from the body. Adorned on the sides of the helm are seabird wings, a familiar Gondorian motif.
This authentically detailed helmet is a reproduction of the helmet prominently featured in The Lord of the Rings,TM The Return of the King presented by New Line Cinema. United® Cutlery Brands, industry leader in fine movie reproductions, has meticulously recreated the actual prop helmet using the finest grade materials and craftsmanship of the highest quality available. This intricately detailed actor´s scale helmet is wearable, and is completely handcrafted in solid iron with embossed decoration and a hand-antiqued finish. It features a genuine leather-lined interior with an individually serialized solid brass plate mounted on the inside back of the helmet to ensure authenticity. This adult collectible is strictly limited to 2000 pieces worldwide and each helmet is presented with a wood display stand adorned with "The One Ring" inscription and a brass medallion.
LIMITED EDITION GONDOR INFANTRY HELM
HELM MATERIAL: Solid iron with embossed decoration and an antiqued finish, genuine leather-lined interior.
DISPLAY: 24.13 cm x 24.77 cm x 17.46 cm wood, burned-edge finish, gold silk screen, brass medallion. Hardware instructions included.UC1414 -
Museum Replicas Windlass - Damascus Viking Sword 500262 - Viking sword
Although iron was a tougher material than bronze it would frequently bend. Damascus, or pattern welded steel, was used to make the blade strong enough to withstand the rigors of combat. Early Viking swords were forged from layers of iron interwoven with strands of steel to produce a very tough sword. This sword is based on an original circa 850-900 AD sword discovered in Finland. The Damascus Viking Sword is made of high carbon Damascus steel. The blade is polished with the fuller acid etched to bring out the beautiful Damascus pattern. The pommel and crossguard are made of solid steel and the grip is leather wrapped wood. Includes a matching wood scabbard with a black leather covering and steel mounts. A very nice example of a true Viking sword.
Blade: 1070 carbon steel damask battle ready
Handle: in leather and metal
Total length: 91.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard 1304g.
Weight with no sheath 938g.
Sheath: wood covered with leather with metal fittings
Note: -500262 -
Museum Replicas Windlass - Viking Sword 501472 - sword
Blade: 1050 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard: 1404g.
Sheath: leather with bronze fittings
Note: -501472 -
Tanto - Kunishi - YNH227 - Japanese sword
Blade: AISI 1060 high-carbon steel
Blade length (including habaki): 23,50cm.
Motohaba: 2.65cm.
Sakihaba: 2cm.
Sori: -
Blade thickness: 6mm.
Kissaki: 4,5cm.
Tsukamaki length: 13.5cm.
Total Length: 37.8cm.
Weight: 346g. (without sheath) - 434g. (including sheath)
Balance: advanced, at 1cm
Saya: black varnished wood
Handle: same white with tsukagawa in black cotton
Sageo: black cotton
Fuchi and Kashira: in brass
Habaki and Menuki: in brass
Seppa: Brass
Notes: -Small technical glossary: Hamon: blade hardening line * Hi: deep groove in the blade, also called colander * Saya: sword sheath * Tsuka: handle * Tsukamaki: weave on the handle * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather that wraps the handle * Tsuba: guard * Fucks: ornaments between guard and manicure * Kashira: ornament at the end of the mitt * Menuki: medallions placed under the jumper of the mitt * Habaki: collar banding the beginning of blade * Seppa: guard gaskets * Shitodome: gaskets to which the Sageo is attached * Motohaba: foam height to the foam * Sakihaba: knife height to the kissaki.
YNH227 -
Marto - Highlander - Kurgan Sword - HI596 - fantasy sword
Kurgan, also known as Victor Kruger, is Connor McCleod's main antagonist in the movie Highlander - The Last Immortal, in which he is played by actor Clancy Brown.
Kurgan is defined by Ramírez (McCleod's mentor) as "the strongest of all immortals and the most cruel of warriors".
In addition to the first film, he is also the protagonist in the novels and comics taken from the film series, in which his story of battles, scars and pain is best told, mostly to his enemies.
Blade: 440A stainless steel
Blade length: 950 mm
Total length: 1240 mm
Handle length: 21 cm with leather cover
Total length: 25 cm
Guard and knob: metal
Sword weight: 2500 gr
Production: SpainHI596 -
Hanwei - Shaolin Jian Tai Chi - SH2442 - Chinese sword
The renowned Chinese Shaolin temple is a place where martial arts exceed their limits also grace the profound union with the Zen Buddhism. Hanwei, with this sword authorized directly from the Shaolin Temple, wants to join the Zen philosophy with the physicality of the forms of Kung Fu Jian embracing the spirit of Shaolin and their traditions in a timeless design: simple but elegant
Blade: steel 1050 high carbon content not sharpened
Total length: 98.5cm.
Blade length: 77cm.
Blade thickness: 5mm.all'elsa; 1mm. toe
Handle length: 10.5cm.
Sword Weight: 510g.
Sheath: bamboo wood and brass
Handle: bamboo wood and brassSH2442€426.23Out of stock -
Museum Replicas Windlass - The Accolade Knight Templar sword 50235
Non Nobis, Domine, Non Nobis, Sed Nomini Tuo Da Glorium
These iconic words engraved on the blade define this historic sword replica. The creed of the Knights Templar - Nothing for us, Lord, nothing for us but for the glory of thy name - marked their illustrious and sometimes infamous 200 year military influence.
This magnificent sword named The Accolade would have been a sword worthy of the Grand Master to knight a loyal member into this holy order. The best metalsmiths from Windlass Steelcrafts have spent hours on each blade, hand forging the high carbon steel for optimal balance, quickness and durability.
The pommel features a highly detailed Templar coin on each side with Latin inscription and the symbols that have grown synonomous with the Templar Order, while the grip is hand-wrapped with a rich genuine red leather with a wire over-wrap. The sword includes a custom, matching wooden scabbard covered in top grain, heavy-duty leather and a period belt with solid metal fittings.- Overall length: 101,5cm
- Blade length: 82cm
- Width of the blade: 5.8 cm
- Weight: 1640 gr
- Blanciatura: 13cm from the guard branch
- Accessories: scabbard and leather belt502356 -
Museum Replicas Windlass - Battle Sword in a hand 501000 - battle ready
- Battle Sword in a hand 501000 - battle ready
Blade: carbon steel and WIRE WITH BULLET TIP 3 MM suitable for battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1122g.
Balance: 14cm. by guard branch501000 -
Museum Replicas Windlass - One Hand Battle Sword - 501002 - battle ready
We are glad to offer our new line of blunt swords and rapiers developed for the rigors of mock combat.
Each blade is built to withstand a lot of use by reenactors or stage performers.
Full tang sword forged of high carbon steel 1095, fully tempered.
The edges and points are 3/16" thick and rounded over for better nick resistance.
Wood grips covered with leather and other authentic materials.
All come with scabbards.
Museum Replicas Windlass - One Hand Battle Sword - 501002 - battle ready
Blade: made of carbon steel, dull, battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1140G.
Balance: 13cm. by guard branch501002 -
Marto - Silver Excalibur - Special Edition - 752SE - Sword
King Arthur’s history and legend is intimately linked to the magic and mysterious sword “Excalibur”. As Merlin the wizard has proclaimed, only the one able to take the sword out of the stone would be the king.
Arthur, knelt in front of the stone fulfilled this deed, took the sword, went with it to the cathedral and offered it in the altar.
Arthur was anointed with the Sacred Oil and, in presence of all the barons and common people, he solemnly swore to be a fair king and to defend Truth and Justice all the days of his life.
Legend and history were mixed through time and King Arthur’s legend, The Knights of the Round Table and the magic sword “Excalibur” have intertwined along the way.
- The handle is golden with contrasting.
- The blade has a special etching in deep black.
- Overall: 120 cm
- Width: 23 cm
- Weight: 2,1 kg
A high quality sword from the exclusive Collection “Deep Etching Swords” made by MARTO
Certificate of Origin and Quality, Made in Toledo (Spain)
12563 -
United - Fighting Knives of Legolas Greenleaf - UC1372 - spade Lord of the rings
United to the happiness of many fans, has re-proposed reproductions of the beautiful elven daggers of Legolas. Sold in pairs with the wooden display stand, the dagger blades measure 40 cm and have a maximum thickness of 5 mm;
total length 57 cm.
Weight each 438 g.
UC1372 -
Marto - Giulio Cesare's Gladio - Limited Edition - AC0300 - historical sword
Julius Caesar, Gaius Julious Caesar (101 b.C. – 44 b.C.) was the greatest soldier and political leader of ancient Roma.
During his lifetime the frontiers of the empire were pushed forward and secured; Rome was transformed from a republic into a government with a single ruler, and Caesar was its first dictator. He wrote some of the finest works of history in Latin, describing the campaigns he fought in Gaul and the Civil Wars; he was an architect, a mathematician, and one of the ancient’s world orators.
There is no doubt that Caesar was ambitious and that he enjoyed the great power placed in his hands. It is said that he wished to be crowned king. This was the reason that the conspirators led by Cassius and Brutus gave for his murder: Caesar has become too powerful and danger for the survival of the Republic.LIMITED EDITION
- • Special finish with damasquinado decorations.
- • Inox AISI 420 Blade.
- • Acid etching in black and gold.
- • Overall: 71 cm
- • Weight: 1,8 kg
High Quality Sword of the exclusive Collection "Heroes and Civilizations" made by Marto.
Certificate of Origin and Quality, "Made in Toledo" (Spain).12444 -
United - Hobbit Sword of Thranduil UC3042 - The Hobbit
United - Hobbit Sword of Thranduil UC3042 - The Hobbit
Father to Legolas Greenleaf, Thranduil is a powerful Elf-Lord and a legendary fighter. King of the Woodland Realm, he rules over the northern lands of the great forest known as Mirkwood.
The sword of the Elvenking was one of two twin swords crafted for Thranduil by the finest smiths of the Woodland Realm. The blade and flowing hilt are forged with engraved vine and leaf symbols representing the forests of the Greenwood, all forged from a single piece of silver Elven steel.
This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop of New Zealand and used in the motion picture, THE HOBBIT: THE DESOLATION OF SMAUG. United Cutlery, industry leader in fine movie reproductions, has meticulously recreated the prop using only the finest grade materials and craftsmanship. Close attention to detail was a top priority. All officially licensed United Cutlery replicas feature the film logo and copyright notice laser engraved on the blade and are accompanied by a certificate of authenticity.
The Design of the Sword of Thranduil:
This replica features a stainless steel blade and cast metal hilt with authentic detailing to precisely match the movie prop. It is presented with a wood wall display featuring graphic motif of Thranduil. Includes a certificate of authenticity.
UC3042 Sword of Thranduil
Includes a parchment certificate of authenticity.
Overall Length: 41-7/8"
Blade Length: 30-3/4"
Highly Detailed Stainless Steel Blade
Authentically Detailed Metal Hilt and Parts
Presented with Wood Wall Mount DisplayUC3042 -
United - Hobbit Fighting Knives of Tauriel UC3044 - The Hobbit
Tauriel is a Silvan Elf and daughter of Mirkwood. Her parents were killed by orcs when she was younger and it is hinted that Thranduil looked after her since then. She is a very young elf, around the age of 600, and is insightful into the changing nature of Middle Earth, recognizing the growing evils of the world and the need to eradicate them rather than withdraw into the safety of the elven fortress.
A favorite of King Thranduil and Captain of his Woodland Elven Guard, Tauriel is highly effective and lethal in combat, and primarily employs a reflex bow and two daggers in battle. She is also shown to possess medical knowledge, being able to treat wounds from poisoned weapons. As a native of the woodland realm, she is also a capable tree-climber and an adept leader.
This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop of New Zealand and used in the motion picture, THE HOBBIT: THE DESOLATION OF SMAUG. United Cutlery, industry leader in fine movie reproductions, has meticulously recreated the prop using only the finest grade materials and craftsmanship. Close attention to detail was a top priority. All officially licensed United Cutlery replicas feature the film logo and copyright notice laser engraved on the blade and are accompanied by a certificate of authenticity.
The Design of the Fighting Knives of Tauriel:
As Captain of the Woodland Guard, Tauriel carries signature twin daggers with blades forged of a bronzed alloy and a Silvan steel edge of superior strength. The hilts are crafted from greenwood with bronzed steel fittings. This replica is crafted of stainless steel with cast metal and polycarbonate handles, precisely detailed and colored to exactly match the movie prop. It is presented with a wood wall mount featuring graphic motif of Tauriel. Includes a certificate of authenticity.
UC3044 Fighting Knives of Tauriel
Includes a parchment certificate of authenticity.
Overall Length: 20-1/2"
Blade Length: 13-7/16"
Stainless Steel Blades with Cast Metal & Polycarbonate Handles
Wall Mount Display with Graphic Motif of TaurielUC3044 -
Museum Replicas Windlass - Sword of the Knights of Malta - Craft Sword
Museum Replicas Windlass - Sword of the Knights of Malta - Craft Sword
Characteristics:
The blade is made of carbon steel with handle in leather.
Guard and pommel are made of steel.
Sheath, including the sword, a leather belt with.
- Overall length: 103cm
- Length of the blade: 86,5cm
- Blade width: 4.8 cm
- Weight: 1260 gr
501226 -
Museum Replicas Windlass - Sword of Tancred - Craft Sword
Museum Replicas Windlass - Sword of Tancred - Craft Sword
Characteristics:
The blade is made of carbon steel with handle in leather.
Steel guard and pommel.
Sheath, including the sword, a leather belt with.- Overall length: 102,5cm
- Blade length: 84cm
- Blade width: 5 cm
- Weight: 1630 gr501423 -
Katana - Ninja-to - YNH226 - Japanese Sword
Sword suitable for practice with balanced weight and good balance. Good level of finishes and excellent quality / price ratio.
Blade: ** NOT SHARPENED ** in 1060 high carbon steel - not sharpened
Hamon: suguha style
Blade length (including habaki): 64cm.
Blade length (excluding habaki): 61cm.
Motohaba: 3.1cm.
Sakihaba: 2.2cm.
Blade thickness: 6.5 (habaki) / 5 (at the tip) mm.
Kissaki: 4cm.
Tsukamaki length: 25.5cm. (total grip 29 cm.)
Total length: 93cm
Weight: 1004g. without saya (1203g. with saya)
Balance: advanced to 11cm. from tsuba
Saya: black painted wood
Tsuka-ito: black cotton on the same white color
Sageo: black cotton
Tsuba, Fuchi and Kashira: black painted brass
Habaki, Menuki, Seppa and Shitodome: brass
Notes: the sword is accompanied by a cotton bagYNH226 -
Katana - Folded Performance Katana - YNHR13 - Japanese sword
Blade: AISI 1060 HCS folded (Damascus) with a high content of carbon - not sharpened
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 72,8cm.
Motohaba: 3.0cm.
Sakihaba: 2.4cm.
Sori: 2.0cm.
Blade thickness: 7 / 5mm.
Kissaki: 4.5cm.
Tsukamaki Length: 24,5cm.
Total Length: 103cm.
Weight: 1034g.
Balance: advanced to 10,5cm from tsuba
Saya: wood polished black
Tsuka-ito: Black Cotton on black samekawa
Sageo: black silk
Tsuba, Fuchi and Kashira: black metal
Habaki and Menuki: antique metal
Seppa: Brass
Note: the sword is accompanied by cotton bagYNHR13 -
Museum Replicas Windlass - The Eagle - Sword of Marcus Aquila - Gladio - products from films
Faithful reproduction of the sword of Marcus Aquila, produced by Windlass and from the movie "The Eagle", the epic film of 2011 with Channing Tatum and film adaptation of the novel "The Eagle of the Ninth Legion" by Rosemary Sutcliff.
Blade steel: 1095 Carbon blunt
Handle: wood and bronze
Blade length: 50.3cm.
Total length: 70cm.
Blade thickness: 1.5mm.
Balancing: Advanced
Weight: 815g.
Sheath: leather, hand-sewn, finished in bronze
Notes: Manufactured under license film official Universal Studios888005 -
The Hobbit - Miniature of the sword of Thorin - open letters - NN1204 - official product
The Hobbit - Miniature of the sword of Thorin - open letters - NN1204 - official product
The Hobbit - Playing in a 1: 3 of the sword of Thorin from "The Hobbit"
Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 20 cm.Officially licensed product accompanied by "The Hobbit" for New Line Cinema
NN1204 -
The Hobbit - Miniature Sword Thranduil - open letters - NN1224 - official product
The Hobbit - Miniature Sword Thranduil - open letters - NN1224 - official product
The Hobbit - Playing in a 1: 3 Sword of Thranduil from "The Hobbit"
Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 21 cm.Officially licensed product accompanied by "The Hobbit" for New Line Cinema
NN1224 -
YariNoHanzo - Shiroi Practical Katana - YNHR3 - katana
This sword is part of the "Series R", an exclusive line, designed to the very best retailers Italian brand YariNoHanzo, designed for practitioners of Iaido, Kendo and katori. The sword is removable and suitable for practice; has balanced weight and good balance.
Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 72.5cm.
Motohaba: 3.2cm.
Sakihaba: 2.2cm.
Sori: 2.5cm.
Blade thickness: 8 / 5mm.
Kissaki: 4.5cm.
Tsukamaki Length: 24.5cm.
Total Length: 101cm.
Weight: 1078G.
Balance: advanced to 12cm from tsuba
Saya: black painted wood
Tsuka-ito: Cotton white on black samekawa
Sageo: white cotton
Tsuba, Fuchi and Kashira: antique metal
Habaki and Menuki: copper
Seppa: copper
Note: The sword is accompanied by cotton bagYNHR3 -
Game of Thrones - Daenerys Targaryen three-headed brooch of Dragons - NN0036
Brooch made entirely of hypoallergenic metal, plated with silver. Manufactured under license from Noble Collection Official HBO.
This brooch, once again the coat of arms of Daenerys Targarien and features three dragon heads surmounting a long pole. The ring set is free to rotate and to move freely.
Size: 11x7x4.5cm12096 -
Valyrian Steel - Catspaw VS0102 Blade - Game of Thrones Game of Thrones
A blade of Valyrian steel that Catelyn Stark recovered from the assassin sent to finish her son Bran. It was taken to King’s Landing by Lady Stark and shown to Petyr Baelish, who identified it as belonging to Tyrion Lannister. This adult collectible is officially licensed from HBO®'s hit series Game of Thrones® and is an edition strictly limited to 2500 pieces.
The Game of Thrones® Collection is a series of collectible weapons and armor painstakingly recreated from the actual props used on HBO®’s hit fantasy epic Game of Thrones®. The officially licensed collectibles are made from the highest quality materials and have been crafted with special attention to reproduce the authentic details found on the props.
This item is not a toy, please keep out of the reach of children. This replica is intended solely for display purposes as a collector's item. Official HBO Licensed Product © 2012 Home Box Office, Inc. All Rights Reserved. Game of Thrones is a trademark of Home Box Office, Inc. Produced under License by Jalic Inc.
Overall Length: 19.5"
Blade Length: 10"
Blade Material: High carbon damascus steel
Handle: Faux "dragon bone" grip with 24k gold plated metal parts.
Plaque: Silkscreened wood with Game of Thrones® motif.VS0102€409.02Out of stock -
Valyrian Steel - Longclaw - Sword of Jon Snow - Game of Thrones
The Valyrian Steel Collection is a series of reproductions with official licenses , fantasy weapons in the universe created by best-selling books by George RR Martin "Chronicles of Ice and Fire ."
Every single product is a limited edition made with the best materials available, and with particular attention to finishes and details .
Longclaw - The Sword of Jon Snow
Blade: not sharp , stainless steel
Guard and pommel : Metal and metal antique nickel finish with white acrylic gems embedded
Handle: Leather
Support Exhibition : From the wall , wood
Blade Length : 89cm
Total Length : 115cm .
Notes: Supplied with a certificate of authenticity and warranty - blade numbered - numbered guarantee certificate
Jon Snow
Jon Snow was born in duecentottantatreesimo year after the conquest of the Western Continent by Aegon Targaryen ; is the illegitimate son of Eddard Stark, played by a woman whose father has never revealed the name .
The name was given in honor of the patron of Ned , Jon Arryn , while the name "Snow " in the North is traditionally given to the bastard children of high birth . Despite not being a legitimate Stark , Jon was accepted by his father and grew up along with the rest of the family. He had the same education in the same age -brother , Robb , with whom he is on good terms , along with Arya , Bran and Rickon . Sansa , by contrast, has always been indifferent , while Lady Catelyn has never accepted , often coming to hate him . Jon is physically very similar to his father, tall , with dark hair and gray eyes . It also has the honor and temperament .VS0106€450.82Only 0 leftOut of stock -
Marto - Sword of Attila - Historical sword
Marto - Sword of Attila - Historical sword
During his reign became the most uncompromising enemy of the Roman Empire and the Eastern Roman Empire of the West invaded the Balkans twice, besieged Constantinople, marched through France, going so far as to Aurelianum, banished from the Ravenna 'Emperor Valentinian III (452).
Nicknamed flagellum Dei ("Scourge of God") for its ferocity, it was said that where he was past would no longer be grown grass. Even today it is regarded in Western Europe among the most evil in history, [1] however studies modern historians see him as more of a predator than a foolish destroyer.
Blade Length: 98 cm wire-free 440 stainless steel
Total length: 135 cm
Thickness: 5mm
Material handle: zamak finely engraved and decorated
Weight: 4.5 kg.attila -
Game of Thrones - Daenerys Targaryen Dragon Egg Pendant - NN0038
Pendant in the shape of dragon egg Daenerys Targaryen, including necklace, made entirely of heavy 925; has dimensions of 25x20mm. Manufactured under license from Noble Collection Official HBO.
Daenerys Targaryen House Targaryen, is the only remaining member of his race, the daughter of the previous king Aerys II Targaryen said the Mad King, and is the only princess and rightful heir of the Seven Kingdoms. Exiled from them since before he was born, in principle Daenerys tries to win them back together with her brother Viserys, devoting following the abolition of slavery in the lands of Westeros and Essos.10898 -
Game of Thrones - House Targaryen Silver Pendant - NN0064
Pendant of the House Targaryen, including necklace, made entirely of 925 sterling silver; has dimensions of 25x25mm. Manufactured under license from Noble Collection Official HBO.
House Targaryen is a noble family, part of the world of the fantasy saga A Song of Ice and Fire by George RR Martin.
The Targaryen have reigned as the royal house of Westeros for nearly three hundred years after the capital, King's Landing, and the island fortress of Dragonstone.
Their coat of arms is a three-headed dragon, red on a black field, and their motto is "Fire and Blood." It is said that the three-headed dragon represents symbolically Aegon I and his sisters.10897 -
Game of Thrones - House Lannister Silver Pendant - NN0062
Pendant of the House Lannister, made entirely of 925 sterling silver and gold plated has dimensions of 25x20mm including necklace made entirely of 925 sterling silver. Manufactured under license from Noble Collection Official HBO.
The House Lannister is one of the eight great noble houses, part of the world of the fantasy saga A Song of Ice and Fire by George RR Martin.
The Lannisters are the protectors of the West, dominate the rich goldfields Lannisport. Their residence is the stronghold of Castel Granite (Casterly Rock in the original). The bastards born in the domains to their faithful have a surname Hill.
Their coat of arms is a golden lion in the purple field, their official motto is: "Hear my roar!", But the other nobles and the people recognize them for "A Lannister always pays his debts."10896