Anno 2016

Anno di produzione: Anni '90

Tipo di produzione: industriale
Lama: in acciaio inox 420
Paese di produzione: Italia - Maniago
Manicatura: osso di giraffa colorato
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 92mm.
Lunghezza totale: 160mm.
Peso: 84g.
Chiusura: Back Lock
Clip: -
Fodero: -
Note: l'articolo inviato potrebbe differire leggermente per colorazione e sfumature rispetto a quello presente in foto

Anno di produzione: Anni '90

Tipo di produzione: industriale
Lama: in acciaio inox 420
Paese di produzione: Italia - Maniago
Manicatura: osso di giraffa colorato
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 92mm.
Lunghezza totale: 160mm.
Peso: 84g.
Chiusura: Back Lock
Clip: -
Fodero: -
Note: l'articolo inviato potrebbe differire leggermente per colorazione e sfumature rispetto a quello presente in foto

3.7V rechargeable IMR battery currently only compatible with Nitecore EC11 and MT10C torches

Rechargeable with Nitecore - Intellicharger i2 EU and Nitecore - Intellicharger i4 EU

Equipped with nickel-plated stainless steel front and rear plates to ensure the best impact resistance, abrasion and corrosion resistance, ensuring maximum electrical conductivity. Suitable for highly energy-consuming electronic devices.

* Rechargeable Battery IMR18350A 3.7V - 700mAh - 7A
* Life cycle: over 500 refills
* Capacity: 700mAh
* Battery size: 18mm in diameter x 34.8mm in length (have a diameter larger than common CR123A / 16340)
* Weight: 20g

WARNING: Positive Flat Plate Battery - This battery has a different diameter than the 16340 / CR123A batteries - Use only in IMR-compatible batteries - Observe the polarity of the batteries when charging and in use - Before to buy and use rechargeable batteries, make sure your device supports them by consulting the manufacturer's manuals.

Robusto fodero tattico in Kydex di alta qualità per modelli Foxtrott

Permette il porto del coltello aperto.

Materiale: Foglio di Kydex da 2mm
Misure: 16,50 cm x 6,3 cm x 2,4cm

Forbice professionale "Made in Italy" da manicure realizzata completamente in acciaio inox satinato.

Uso: Unghie e Pelli manicure
Lunghezza: 10 cm.
Larghezza: 4.5 cm.
Lunghezza Lama: 2.5 cm.

Bag fabric door gouges Pfeil

Closed size: 30cm x 23cm

Capacity: max 12 pieces

Intended use: Tactical / Sports

Type of production: Industrial
Production Country: Italy
Blade: CPM-S35VN Steel 60 / 61HRC
Blade treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box
Notes: Opening with Carson Flipper system - Design by William W. HARSEY

Opinel - Les Effilés walnut - n12 stainless steel - knife

Type of production: Industrial
Production Lama France
Blade: Stainless steel
Handle: walnut
Blade length: 120mm.
Blade Thickness: 2mm.
Closed Length: 146mm.
Thick when closed: 22mm.
Overall length: 275mm.
Weight: 46g.
Closing: viro block

Year of production: 90s

Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: brass and wood
Blade length: 48mm.
Blade Thickness: 2.5mm.
Closed Length: 66mm.
Overall length: 110mm.
Weight: 38g.
Lock: Back Lock
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90

Original spare rubber for Luminox Navy Seal 21mm 3001 series

- Silicone Strap

- Width 21 mm

Original parts for Luminox Sentry models

- Silicone Strap

- Width 22 mm

Original spare rubber for Luminox Navy seals Colormark series

- Silicone Strap

- Width 23 mm

Original parts Model 1920 Luminox Atacama
- Brown Leather Strap

- 26mm width

Original parts for Luminox Navy Seal 22mm models

- Strap in gray fabric

- Width 22 mm

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving. The narrowest No. 11 sweeps are ideal for carving fine details like hair.

Gouges serie 11

Gouge measures: total length 24.5 cm

They are provided 15 different measures from 0.5 to 30 mm

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.

Gouges serie 9

Gouge measures: total length 24.5 cm

They are provided 16 different measures from 1 to 40 mm

Halcon Spain - Spanish Traditional Stiletto bladeless block - 8,5cm - vintage knife
Intended Use: collection

Production Type Semi-Handmade
Blade: stainless steel 420
Production Country: Spain
Handle: brass with wooden insert
Blade length: 8.5mm.
Blade Thickness: 2mm.
Overall length: 185mm.
Closed Length: 100mm.
Closing system: -
Weight: 30g.
Sheath: -
Packaging: -
Notes: Spanish traditional stiletto late 80s

Intended Use: collection

Production Type Semi-Handmade
Blade: stainless steel 420
Production Country: Spain
Handle: brass with wooden insert
Blade length: 11.5mm.
Blade Thickness: 2mm.
Overall length: 255mm.
Closed Length: 134mm.
Closing system: -
Weight: 76g.
Sheath: -
Packaging: -
Notes: Spanish traditional stiletto late 80s

Scissors Thinning mod. Style by Salon Professional 6.5 "

Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 6.5 cm
Overall Length: 6.5 Inches - 16,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.

Each scissor is controlled by our laboratory in order to ensure a perfect cut

Opinel - Display Glass Collection 10-piece stainless steel blade - knife

Invented in 1890 and still today produced in Savoy, the pocket knife Opinel is famous worldwide.

Collection Set of 10 pieces 2-12 with glass lid

Type of production: Industrial
Production Lama France
Blade: stainless steel Sandvik 12C27
Blade treatment: Satin
Handle: Wood
Packaging: Wooden box with logos Opinel

The manual flywheel meat slicer for those who want to bring a touch of class to their homes and tables. Its elegance brightens up the room, its perfect cut is a celebration of flavours. All this in a compact little jewel.

FLYWHEEL B2, the flywheel meat slicer for home use
Berkel B2, the compact manual flywheel slicer faithful to tradition. The vintage meat slicer, manufactured the traditional way, remains a jewel of the past. A precious and elegant furnish. The pride of gourmet connoisseurs. Its structure is not too heavy, making it ideal for a professional but not intensive use.
B2 has a blade with a 265 mm diameter. It is available in 3 standard colours: red, black, and cream, or in a wide range of custom colours. Its accessories include the pedestal and flower flywheel, which makes it even more precious.
Some details may be different from those shown in the photos.

Technical data
- Cutting capacity (round) 160 mm
- Maximum overall dimensions 715 x 520 x 580h mm
- Maximum slice thickness 2 mm
- Cutting capacity (rectangular) 190 x 150h mm
- Blade diameter 265 mm
- Weight 33 Kg

The blade
Flywheel B2 has a 100cr6 steel blade with a 265 mm diameter and a 150 mm round cutting capacity. It allows for a slice thickness that ranges between 0 and 2 mm. The concave shape of the blade touches the product only at the cutting point, thereby preventing any alteration in taste and scent.

Built-in sharpener
The B2 flywheel slicers have a built-in blade sharpener. You can position the sharpener manually simply by lifting and rotating it. The sharpener has only one position, which ensures the perfect angle for optimal sharpness.

Blade protection device
Flywheel B2 is equipped with a protection device that covers the blade to ensure minimum safety requirements while using or cleaning the machine.

Waste collection drawer
This machine has a drawer to collect the waste produced while slicing. Another measure that makes this machine even easier to use and clean.

Anodised aluminium meat table
The B2 flywheel slicers are equipped with an anodised aluminium meat table, which ensures durability and wear-resistance.

Laguiole en Aubrac - Centre of Horn spring engraved with the Maltese Cross with blade sanmai - knife

Intended Use: Regional / Collection

Type of production: crafts
Blade: rolled steel damask and Japanese VG10
Production Lama France
Handle: Horn Cattle Blonde
Blade length: 100mm.
Blade Thickness: 3mm.
Length closed: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 104g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Intended Use: Hunting / Hiking

Type of production: Industrial
Production Lama: Italy
Blade: 440C Stainless Steel 57 / 58HRC
Blade treatment: Satin
Handle: Orange G10
Blade length: 214mm.
Blade thickness: 5mm.
Overall length: 345mm.
Balancing: Advanced
Weight: 420g.
Sheath: Leather
Packaging: Cardboard box with logos Maserin
Notes: Knives Group's official Facebook "Boars that Passion", created by Maserin in collaboration with the Group with the aim of getting the best knives for cinghialai, combining high quality materials with excellence in processing, aesthetics, ease of use and absolute security

Buckle for paracord bracelets

Materials: Plastic
Dimensions: 43mm x 20mm

Potenze e durate certificate in laboratorio da standard ANSI/NEMA FL1

Led: 1x Cree XP-G R5 con un ciclo vitale di 50.000 ore e con diametro di illuminazione di 100°
Modi Operativi: 3 potenze luminose, regolate digitalmente
Potenze e Durate: 45 Lumens (0.45h. ) -> 15 Lumen (1.45h.) -> 2 Lumens (21h.)
Picco di potenza: 230 candele
Distanza di illuminazione massima: 30m.
Metodo di accensione: Pulsante multifunzione
Metodo di selezione luminosa: Pulsante multifunzione
Corpo: policarbonato trasparente
Batterie: Li-Ion, inclusa, non rimovibile, dotata di sistema di ricarica integrato
Misure: 5.87cm (Lungh.) - 2.42cm (Largh,) - 0.5cm (Spess.)
Peso: 9.6g. - batteria inclusa
Accessori: doppio anello in acciaio per aggancio
Impermeabilità: come da standard IP65, resiste ad acqua e polvere
Resistenza agli impatti: resiste a cadute da 1.5m di altezza
Note: Comprensiva di fascia frontale multifunzione, con supporto girevole che permette di far ruotare la torcia di 360° in base alle proprie esigenze. La torcia può anche essere separata dalla fascia ed utilizzata come una normale torcia tascabile o può essere agganciata a tasche. Dotata di sistema di ricarica integrato tramite porta MicroUSB; in fase di ricarica, un LED integrato mostrerà lo status e si spegnerà automaticamente a ricarica completata. Il sistema di ricarica previene automaticamente il sottovoltaggio, il sovravvoltaggio ed ha una protezione integrata contro le cortocircuitazioni.

FUNZIONAMENTO

* Tenendo premuto il pulsante di accensione, la luce si imposta ad 1 Lumen di potenza, premendo leggermente la potenza sale a 15 Lumens, premendo nuovamente la luce sale a 45 Lumens.
* Tenendo nuovamente premuto il pulsante di accensione, la luce si spegne.

RICARICA

* Sollevare il gommino che protegge il pulg MicroUSB posto sul lato della torcia
* Inserire un cavo di ricarica di tipo MicroUSB (lo stesso utilizzato per ricaricare smartphone e dispositivi di tipo Android, facilmente reperibile)
* Il LED Rosso di carica si accenderà segnalandovi che la ricarica è cominciata
* A ricarica terminata, il LED Rosso si spegne ed i circuiti integrati terminano automaticamente la ricarica senza necessità che venga rimosso il cavo MicroUSB

CERTIFICAZIONI

* RoHS / C E

The Wasabi line of Kai, Japanese industry partners Kershaw Knives, is distinguished by the excellent quality / price ratio. It proposes stainless steel blades and ergonomic manicature in polypropylene with addition of powdered Bamboo that are heat resistant up to 100 ° C, dishwasher safe.

Kai Japan - Wasabi - Chef's Knife 230mm.

Blade: M.V. Stainless Steel polished steel
Handle: combination of bamboo powder and polypropylene black - Heat resistant up to 100 ° C
Blade length: 235 mm.
Blade thickness: 2.5 mm.
Overall length: 370 mm.
Weight: 224 g.
Notes: Dishwasher safe

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and CTS-204P
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - KVT Ball Bearing System

Intended use: Sport / Tactical / EDC

Type of production: industry
Blade: stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Production Lama: China
Handle: Stainless steel stonewashed and G10
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 165mm.
Balancing: -
Weight: 105g.
Closure: Frame Lock
Clip removable and multi, Teflon-coated stainless steel
Sheath: -
Notes: Design by Rick Hinderer

Intended use: Sport / EDC
Type of production: industry
Blade: stainless steel with sharp 14C28N in CPM-D2
Blade treatment: -
Production Lama USA
Handle: G10
Blade length: 92mm.
Blade Thickness: 3mm.
Length closed: 125mm.
Overall length: 216mm.
Balancing: -
Weight: 165g.
Lock: Liner Lock
Clip: Removable stainless steel Teflon
Sheath: -
Notes: opening by flipper

NK2 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the model NK1 for blade-type "time" and for the increased thickness. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 50mm.
blade thickness: 6.3mm.
total length: 129mm.
Weight: 69g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

Con questa spada, frutto della collaborazione con Davis Panzer Productions, inizia la storia di Highlander ed ora Marto presenta questa splendida riproduzione dettagliatissima.

Questa infatti è la spada originale del Clan MacLeod impugnata dal giovane Connor MacLeod nella sua battaglia fatale contro il Kurgan ed utilizzata poi come lapide per custodire la sua amata moglie scomparsa, Heather.

- Lama in acciaio 440 lucidata a specchio e priva di filo

- Impugnatura in acciaio inciso e brunito con intreccio in cuoio

- Lunghezza della lama di 109cm.

La saga Sword of the Ancients di Kit Rae continua con la spada Vorthelok.

La lama, non affilata, realizzata in acciaio inox 420 ha una lunghezza di 80cm e la spada ha una lunghezza totale di 115cm. ed un peso di 2880g.

L'impugnatura in corda nera è lunga 12.5cm, guardia e pomolo sono in acciaio inox.

La spada è accompagnata da un poster autografato e da certificati di garanzia ed autenticità United Cutlery.