Anno 2019
-
Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife
A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.
A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.
Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.
Intended use: sub/sporting
Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -SC88SYL -
Spyderco - Dragonfly 2 Wave - Emerson Opener - C28GYW2 - knife
Intended use: sports
Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN with stainless steel drowned folders
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 37g.
Opening: via Emerson Wave system or through the "SpyderHole" blade recess
Closure: Back Lock
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Spyderco logos
Note: -C28GYW2 -
Spyderco - Dragonfly 2 Salt Yellow Hawkbill - C28YL2HB - Knife
Intended use: sub / immersion / sports
Type of production: Industrial
Country of production: Japan
Blade: in H1 nitrogen steel
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon)
Blade length: 58mm.
Blade thickness: 2.5mm.
Length closed: 85mm.
Total length: 139mm.
Weight: 37g.
Closure: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Notes: carbon-free blade, resistant to rust, oxidation and corrosionC28YL2HB -
Spyderco - Techno 2 TI Knife by Marcin Slysz - C158TI2 - knife
Intended use: sports
Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel CTS-XHP
Blade treatment: Stonewashed
Handle: Titanium
Blade length: 64mm.
Blade thickness: 3.5mm.
Closed length: 88mm.
Total length: 152mm.
Thick when closed: -
Weight: 99g.
Closure: R.I.L. Reeve Integral Lock (Frame Lock)
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: Design by Marcin SlyszC158TI2 -
Spyderco - Para 3 - PVD - G10 Digital Camo - C223GCMOBK - knife
Intended use: Sports
Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S45VN
Blade treatment: PVD
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -C223GPCMOBK -
Spyderco - Mantra 3 Flipper - Carbon Fiber - C233CF - knife
Destination of use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: Satin
Handle: Carbon Fiber
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 106mm.
Total length: 184mm.
Weight: 82g.
Locking system: Compression Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: opening by Carson Flipper system on ball bearingsC233CF -
Chris Reeve - Umnumzaan Clip Plain - folding knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium 6AI4V
Blade Length: 90mm.
Blade thickness: 3.5mm.
Closed length: 123mm.
Overall length: 212mm.
Closed thickness: 17mm.
Balance: -
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -UMN-1000 -
Spyderco - Slysz Bowie Titanium by Marcin Slysz - C186TI - knife
Intended use: Sports / Collection
Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel CTS-XHP
Blade treatment: Satin finish
Handle: Titanium
Blade length: 87mm.
Blade thickness: 3.5mm.
Closed Length: 111mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 122g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin SlyszC186TI -
Spyderco - 2013 Brad Southard Flipper Folder - C156GPBN - Knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: CTS-204P stainless steel
Blade treatment: Stone Washed
Handle: G-10 and Titanium
Blade length: 88mm.
Blade thickness: 4mm.
Length closed: 114mm.
Total length: 202mm.
Thick when closed: 13.4mm.
Weight: 116g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Removable, in stainless steel
Packaging: Cardboard box with Spyderco logos
Notes and curiosities: Design by Brad Southard - Ball Bearing Pivot System - First Spyderco with Carson Flipper type rapid opening - 2013 model now out of production and nowhere to be foundC156GPBN -
Chris Reeve - Neil Roberts 6 "knife - knife
The Collini Cutlery is official distributor for Italy of the tactical knives / collection made in USA Chris Reeve
Intended use: Fighter / Tactical
Type of production: Artisan
Blade: stainless steel CPM-S35VN 55 / 57HRC
Lama production: USA
Handle: Black Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Length closed: -
Total length: 290mm.
Balancing: set back to 1cm. from the lower guard branch
Weight: 356g.
Closure: -
Clip: -
Sheath: by SpecOps, in cordura
Notes: single-piece knife from 2007 - production ranksCR0014