Collection Knives: For Knife Collectors and Custom Knife Enthusiasts

RETIRED KNIFE FROM PRIVATE COLLECTION
* Provenance: Withdrawn from a private individual, previously purchased
* Condition: Iconic knife from the early 2000s, never used, in very good condition (typical signs of wear of this model and material given by rubbing with the sheath)
* Available on the market: Difficult to find and not in this configuration
* Sharpening: Professionally sharpened
* Blade marks: Typical wear marks of this model and material, given by rubbing with the sheath
* Signs on handle: None
* Box: -
* Sheath: Present and in excellent condition, Made in USA by SpecOps
* Manuals, Certificates and Guarantees: -
* Controlled and Certified by our in-house laboratory

Intended use: Multi-role

Type of Production: industrial
Blade: Full Tang in Titanium Beta, with micro-balled finish
Country of production USA
Grip: Black G10
Blade length: 130mm.
Blade thickness: 6.3mm.
Total length: 255mm.
Weight: 243g.
Sheath: Made in USA by SpecOps, in coyote colored Nylon, belt, MOLLE compatible, with thermoformed Kydex inner part
Packaging: -
Note: Previously purchased knife, from private collection - iconic product from the early 2000s

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used and never removed from its original packaging
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended use: Tactical/Sport

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Finish: Testudo burnishing
Handle: Forprene
Blade length: 128mm.
Blade thickness: 6.3mm.
Total length: 258mm.
Balance: rearward
Weight: 253g.
Sheath: Gen.1, ABS, with Tek-Lok multi-position attachment
Packaging: cardboard box with Extrema Ratio logos
Notes: from a private collection - 2007 model now out of production (replaced by the T4000 series)

KNIFE FROM A PRIVATE COLLECTION
* Origin: Retrieved from a private collection, previously purchased
* Condition: Like new
* Available on the market: Discontinued
* Sharpening: Original
* Blade marks: None
* Handle marks: None
* Box: Included
* Sheath: Included
* Manuals, Certificates and Warranty: Included
* Inspected and Certified by our in-house lab

Japanese steel meets Italian excellence

For this 2020 collaboration, exclusively for Coltelleria Collini, we decided to offer a series of best sellers produced by Extrema Ratio. These knives are made using the renowned San Mai steel produced by Japan’s Takefu Steel. Specifically, we used carbon-rich V-Toku2 at 62/63HRC for the central core and stainless SUS410 for the outer layers, resulting in superior cutting performance, penetration, edge retention, ease of sharpening, and at the same time excellent corrosion resistance and increased resilience due to the laminated structure.

Model Col Moschin Compact: this First Production Run was limited to 15 numbered units, from 1 to 15.

The lethal efficiency of the COL MOSCHIN knife, now in compact version. Comes with a rigid belt sheath and BELT-CLIP. The sheath can be mounted horizontally, vertically, or at a 45° angle.

Usage: tactical, sports, hiking, collecting

Blade: full tang, laminated Japanese steel (San Mai) with cutting edge in V-Toku2 (carbon steel) at 62/63HRC and outer cheeks in SUS410 (stainless)
Handle: Forprene
Blade length: 110mm
Blade thickness: 6.5mm
Overall length: 212mm
Balance: 0.5cm behind the guard
Weight: 209g
Sheath: ABS with multi-position Tek-Lok attachment
Notes: Numbered edition - cardboard box with Extrema Ratio logos and certificate - as the cutting edge is carbon steel, it is recommended to lightly oil the blade to maintain its condition.

As in ancient Japanese Samurai swords.

The laminated steel – imported into Italy by Collini Steel directly from Japan’s Takefu Steel – is based on the age-old Japanese sword-making tradition. As early as the 1100s, Japanese blacksmiths were combining different metals to craft Katana swords with extraordinary cutting power, resistance, and flexibility. This revolutionary technique allowed Samurai swords to survive through centuries and become among the most fascinating human-made artifacts. Applied to modern metallurgy, this tradition now yields advanced steels already used in knife-making by brands like Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

San Mai Steel Features: A combination of different metals bonded together to create a composite with amplified properties:

- Greater edge retention
Thanks to high-carbon premium steels (VG10, CoS, Shiro) or powder steels (SPG2) in the core, once hardened, the blade achieves cutting performance far superior to traditional steels.

- Higher resilience
Based on Japanese sword construction, the multi-layer steel is highly resistant to breaking due to the toughness of the core and flexibility of the stainless cladding.

- Improved corrosion resistance
The outer stainless layers ensure high corrosion resistance. Takefu’s multi-metal bonding also enhances galvanic protection of the edge.

- Easy processing post heat-treatment
Despite being hardened, the outer layers retain softness, allowing easy drilling, grinding, or welding. Cryogenic treatment is recommended for optimal performance.

- Enhanced aesthetics
Multi-layer or Damascus-patterned knives are elegant, refined, and highly valued by collectors worldwide.

For more information: collinisteel

Includes cover and article published in the October/November 2016 issue of "Coltelli" magazine.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: 2020 knife in mint condition
* Available on the market: Difficult to find
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

The ultimate folding companion to the Marine Utility: Fighter Flipper
We believe we have created the best folding knife inspired by the classic Marine Utility ever made. The Fighter Flipper™ is the perfect complement to our famous fixed blade “Fighter.” A unique combination of titanium components and a blade heat-treated to 58 HRC for high performance in any situation.

Solid, decisive, surprisingly versatile: this knife is just as comfortable at work as it is in your pocket during a walk around town. Every detail is designed to impress: from the retro finish of the scales to the drop-point blade, the integrated knob handle, and the pocket clip with integrated ball bearing—a detail never seen before.

In the world of knives, there is nothing comparable to the Fighter Flipper™. A true force of nature that invites you to strike, pierce, and crush. Use it with caution: it unleashes pure power.

Intended use: Tactical/Heavy Duty

Type of production: MidTech
Country of production: USA
Blade: CPM-S45VN stainless steel
Blade treatment: Tumbled
Handle: Tumbled Titanium 
Blade length: 85mm.
Blade thickness: 5mm.
Closed length: 115mm.
Total length: 190mm.
Closed thickness: 12.5mm.
Weight: 276g.
Lock: Framelock
Clip: titanium, tumbled finish - removable
Packaging: rigid box with Medford logos, warranty certificates
Notes: Designed and built by Greg Medford - previously purchased product from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Collected from a private individual, previously purchased.
* Condition: New, never used
* Commercially available: Larger limited edition and in VG10 steel, no longer commercially available, made only in 10 numbered pieces
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: originally sold without packaging
* Scabbard: Present
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

This exclusive knife, withdrawn from a private collection, is a true rarity, never used and kept in perfect condition. It is a limited edition, produced in only 10 numbered examples, no longer commercially available. Each knife has been checked and certified by our in-house laboratory, guaranteeing authenticity and quality.

Designed for versatile use in bushcraft and as an all-rounder utility, this knife is handcrafted in the UK by renowned British knife maker Rob Bayley, best known for the model used by Bear Grylls in his first television appearances in 2007

Intended Use: Bushcraft / All Rounder Utility

Type of production: Handcrafted
Country of manufacture: United Kingdom
Blade: full tang in VG10 stainless steel
Finish: Satin finish
Handle: made of G10 with pin tubes and 300 stainless steel through-guard 
Blade length: 115mm.
Blade thickness: 4mm.
Total length: 228mm.
Balance: backward
Weight: 230g.
Sheath: black leather, with loops for horizontal carry
Packaging: knife entirely handmade by British knife maker Rob Bayley - model famous for being used by Bear Grylls in 2007 during his first TV appearances, larger limited edition and in VG10 steel, no longer commercially available, made only in 10 numbered examples

MCUSTA MC-0241GD Tanto SPG2/R2 Damascus - Fixed Japanese Knife

The MCUSTA MC-0241GD is a high-end fixed knife inspired by traditional Seki swords, crafted with Japanese craftsmanship. This exclusive model combines classic aesthetics with modern materials, offering a perfect balance between beauty and functionality. The SPG2/R-2 laminated damascus steel blade provides exceptional cutting performance, while the Japanese-style tsuka-gawa breed and woven leather handle ensures a secure and comfortable grip. Packaged in an elegant paulownia wood box, it is ideal for collectors and enthusiasts of high-quality knives.

Intended Use: Collector/Sportsman

Type of manufacture: industrial
Blade: full tang in rolled damascus steel, with a 61/62HRC SPG2 core and R-2 outer cheeks
Blade finish: hammering (Tsuchime)
Country of manufacture: Japan
Handle: genuine Breed leather handle (Samekawa) with leather weave (Tsuka-Gawa)
Blade length: 135mm.
Blade thickness: 4.2mm.
Total length: 265mm.
Balance: on the guard branch
Weight: 195g.
Sheath: leather, belt, for vertical carry
Packaging: box made of Paulownia wood, with manufacturer's logos
Notes: -

The Laguiole Hunting Knife embodies the pinnacle of traditional French craftsmanship, designed for those seeking a rare combination of beauty and functionality. Featuring a handcrafted Damascus steel blade, this hunting knife stands out for the elegant wavy pattern on the blade, the result of a refined and complex technique.

The handle, made from genuine natural horn tip, gives each piece its own uniqueness, while the spine is adorned with fine hand-engraved guilloché – a signature of artisanal mastery. Solid, sharp, and extraordinarily elegant, it’s a collector’s item for true Laguiole enthusiasts.

Intended use: Collection / Hunting
Production type: Handmade
Country of origin: France
Blade: Welded Damascus steel
Blade finish: Visible Damascus, polished
Handle: Natural horn tip
Blade length: 120mm
Blade thickness: 3.5mm
Closed length: 140mm
Total length: 260mm
Closed thickness: 13mm
Weight: 190g
Locking mechanism: Slipjoint
Clip: None
Packaging: Leather sheath and gift box
Notes: Guilloché engraving entirely handmade, natural material handle – each piece is unique

The TRC M-1SL is a high-quality survival knife produced with great attention to detail.

The blade, 119 mm long and 4 mm thick, is made of Böhler M390 steel with an Apocalyptic finish, a special applied workmanship that gives a rugged, worn appearance. This finish not only adds a distinctive aesthetic, but also offers increased resistance to scratches and wear, making the knife ideal for extreme and survival situations. The micarta canvas handle provides a secure and comfortable grip even in adverse conditions. Full-tang construction ensures strength and durability.

The knife comes with a black Kydex sheath for safe and convenient carrying. With a total weight of 230 g and an overall length of 245 mm, the TRC M-1SL is ideal for outdoor activities, bushcraft and survival situations.

Intended Use: Sporting / All rounder utility

Production type: Industrial
Country of manufacture: Lithuania
Blade: full tang stainless steel M390
Blade finish: Apocalyptic
Handle: Canvas Micarta
Blade length: 119mm.
Blade thickness: 4mm.
Total length: 245mm.
Weight: 230g.
Sheath: thermoformed kydex, with removable Nylon belt loop
Packaging: box with TRC knives logos, manuals and warranties

Note: no loyalty discounts are active on this product

The TRC M-1SL is a high-quality survival knife produced with great attention to detail.

The 119 mm long and 4 mm thick blade is made of Böhler M390 steel with a satin finish, providing excellent resistance to wear and corrosion. The black G10 handle provides a secure and comfortable grip even in adverse conditions. Full-tang construction ensures strength and durability.

The knife comes with a black Kydex sheath for safe and convenient carrying. With a total weight of 230 g and an overall length of 245 mm, the TRC M-1SL is ideal for outdoor activities, bushcraft and survival situations.

Intended Use: Sporting / All rounder utility

Production type: Industrial
Country of manufacture: Lithuania
Blade: full tang stainless steel M390
Blade finish: Satin finish
Handle: G10
Blade length: 119mm.
Blade thickness: 4mm.
Total length: 245mm.
Weight: 230g.
Sheath: thermoformed kydex, with removable Nylon belt loop
Packaging: box with TRC knives logos, manuals and warranties

Note: no loyalty discounts are active on this product

PREVIOUSLY PURCHASED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife previously purchased, withdrawn from a private collection
* Condition: Like new, never used, never taken out of the box and never placed in the sheath.
* Commercially available: Hard to find with this particular briar handle
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present, new, never removed from plastic packaging still sealed.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.

The Bark River Bushcrafter II is designed to be the ultimate bushcraft knife. The name itself is no accident: careful research has led to an exceptional result that is appreciated by enthusiasts in the field. The blade has an ideal shape for bushcraft activities, while the handle offers excellent ergonomics. Compared to the standard model, the Bushcrafter II is slightly larger, with a blade over an inch longer.

Made of CPM 3V steel, the blade is extremely durable and retains its sharpness for a long time. However, it is not completely stainless, so it should be cleaned after use and occasionally oiled to prevent corrosion. The edge has a convex bevel, which is easy to maintain by sanding.

The handle is made of fine desert ironwood burl, a hardwood from the U.S. and Mexico, featuring an elegant grain that gives the knife a luxurious look. The leather sheath allows for both vertical (belts up to 2 inches) and diagonal carry.

Each Bark River knife is handcrafted and one-of-a-kind.

Intended Use: Hiking / Utility / Bushcraft

Country of manufacture: USA
Blade: full tang made of CPM-3V carbon steel at 61HRC
Handle: desert ironwood burlwood
Blade length: 113mm.
Blade thickness: 4.1mm.
Total length: 233mm.
Weight: 205g.
Sheath: leather, belt
Notes: knife from a private collection, like new, never taken out of its box and never placed in the sheath

The Medford USMC Fighter Flipper (USMC-FF) in the DLC Lasered Titanium edition is a premium tactical knife designed to combine strength and style. The blade is crafted from CPM-S45VN, a steel known for its exceptional corrosion resistance and long-lasting edge retention. The DLC (Diamond-Like Carbon) finish provides high protection against scratches and wear, ensuring reliable performance even in the most challenging conditions.

The unique laser-engraved anodized Titanium, along with a multi G10 effect, gives the handle an exclusive texture and distinctive aesthetic while enhancing grip. The Frame Lock mechanism provides secure operation, and the stainless steel clip with DLC finish enables practical and safe carrying. Ideal for enthusiasts, collectors, and tactical operators, this knife strikes a balance between refined design and extreme functionality.

Intended Use: Tactical/Heavy Duty

Production Type: Semi-custom
Country of Manufacture: USA
Blade: CPM S45VN steel
Blade Treatment: Black
Handle: DLC Lasered Titanium
Blade Length: 85mm
Blade Thickness: 5mm
Closed Length: 115mm
Total Length: 190mm
Closed Thickness: 12.5mm
Balance: on guard
Weight: 276g
Opening: Ambidextrous
Washers: Brass
Locking Mechanism: Frame Lock
Clip: Titanium, removable
Packaging: Cardboard box with Medford logos
Notes: Designed and built by Greg Medford

KNIFE FROM A PRIVATE COLLECTION
* Type: Previously purchased knife withdrawn from a private collection
* Condition: Excellent, with very minor marks on the blade
* Availability: Available
* Edge: Factory edge
* Blade Marks: Minor marks on the blade
* Handle Marks: None
* Box: Original
* Sheath: Perfect, never used
* Manuals, Certificates, and Warranties: Original warranty document
Inspected and Certified by our internal lab

The Moros is an excellent choice for field use or tactical applications. This well-balanced blade is the perfect blend of size and performance. Light enough to carry without discomfort but sturdy enough to tackle various daily tasks. The tip profile is flat with a tapered upper edge, ensuring excellent cutting performance with good penetration strength. The full tang and handle of the Moros provide a neutral balance, making it light in hand. The ergonomic and textured Micarta canvas handle offers a comfortable and secure grip, both dry and wet.

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had been designing knives for friends in the special forces, and Mark, who worked with military and tactical equipment in the "Green Berets," decided to combine their skills and passion to create innovative and functional knives using the highest quality materials, entirely made in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Manufacture: USA
Blade: CPM-S45VN stainless steel 59/61 HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade Length: 134 mm
Blade Thickness: 4.8 mm
Overall Length: 254 mm
Balance: On guard
Weight: 203 g
Sheath: Kydex thermoformed
Packaging: Cardboard box with Spartan Blades logo
Note: Design by Curtis Iovito

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: -
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: -
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Deer wood and leather rings, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: deer horn and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 275g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: Nylon pouch with zipper, with Randall Knives logos
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: Original warranty sheet
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Desert Ironwood and leather, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: Desert Ironwood and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 270g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new - provided with Randall Knives zippered nylon pouch and paper warranty

PREVIOUSLY PURCHASED KNIFE, RETRIEVED FROM PRIVATE COLLECTION
* Type: previously purchased knife, from a private collection
* Condition: "First Production Run" edition, like new, never used, never removed from the packaging, and never placed in the sheath
* Available on the market: Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present, also includes a second new leather sheath
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our internal laboratory

The Bark River Ultra Lite Field Knife is a versatile knife designed to excel in bushcraft activities but capable of handling many other functions. Its clip/harpoon blade is made of CPM 3V steel, offering excellent resistance and holds its edge well, making it ideal for processing game and food preparation. However, it is important to protect it from moisture and acids, as it is not completely stainless; regular maintenance, such as cleaning and applying oil, is recommended to preserve its quality.

The handle is made from a wonderful desert ironwood burl, a precious wood that has a unique and variable appearance. Each handle is different, reflecting the value of the natural product. The entire design of the knife makes it an excellent tool for both practical use and for those seeking a distinctive item.

Intended use: Hiking / Utility / Bushcraft

Country of production: USA
Blade: full tang made of CPM-3V carbon steel at 61HRC
Handle: desert ironwood burl
Blade length: 115mm.
Blade thickness: 3.2mm.
Total length: 213mm.
Weight: 125g.
Sheath: leather
Notes: knife from a private collection, like new, never removed from its packaging and never placed in the sheath - Out of production and no longer available on the market, differs from the standard production by the use of burl wood for the handle - "First Production Run" engraved on the blade

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Commercially available: unique handcrafted piece
* Sharpening: original
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: -
* Manuals, Certificates and Guarantees: YES
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Handcrafted
Blade production: Italy
Blade: C70 stainless steel
Blade treatment: -
Handle: ram horn
Blade length: 125mm.
Blade thickness: 3mm.
Closed length: 155mm.
Total length: 280mm.
Thickness when closed: 19mm
Balance: -
Weight: 105g.
Closure: without blade lock
Clip: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Morittu
Notes: -

Nino Morittu - Knifemaker from Silanus, Province of Nuoro

Nino Morittu creates unique knives, pieces of rare artisanal beauty designed, drawn and finished personally. Each knife is a masterpiece of exceptional craftsmanship, demonstrating his skill in the art of knifemaking. His works, regularly exhibited at various knife shows, have gained wide recognition from collectors and amateurs alike. Morittu prefers the use of C70 type steels and does not produce in large quantities, keeping each piece exclusive thanks to his meticulous artisanal method.

The precision in the details makes his knives almost perfect, testifying to a deep love for work well done. Aesthetically superb, they represent excellent craftsmanship and a passion for quality materials. Morittu's creations are exhibited in internationally renowned museums such as Albacete in Spain, Montreal in Canada, as well as in the United States and Berlin, Germany.

Renowned for his perfectionism, Morittu is often compared to Calaresu, another master knifemaker known for his attention to detail. A distinctive feature of his work is the exclusive use of "paired" horns for the handles, ensuring that there are never any visual disparities between the scales.

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Commercially available: unique handcrafted piece
* Sharpening: original
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: -
* Manuals, Certificates and Guarantees: YES
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Handcrafted
Blade production: Italy
Blade: C70 stainless steel
Blade treatment: -
Handle: ram horn
Blade length: 120mm.
Blade thickness: 3mm.
Closed length: 155mm.
Total length: 280mm.
Thickness when closed: 19mm
Balance: -
Weight: 114g.
Closure: without blade lock
Clip: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Morittu
Notes: -

Nino Morittu - Knifemaker from Silanus, Province of Nuoro

Nino Morittu creates unique knives, pieces of rare artisanal beauty designed, drawn and finished personally. Each knife is a masterpiece of exceptional craftsmanship, demonstrating his skill in the art of knifemaking. His works, regularly exhibited at various knife shows, have gained wide recognition from collectors and amateurs alike. Morittu prefers the use of C70 type steels and does not produce in large quantities, keeping each piece exclusive thanks to his meticulous artisanal method.

The precision in the details makes his knives almost perfect, testifying to a deep love for work well done. Aesthetically superb, they represent excellent craftsmanship and a passion for quality materials. Morittu's creations are exhibited in internationally renowned museums such as Albacete in Spain, Montreal in Canada, as well as in the United States and Berlin, Germany.

Renowned for his perfectionism, Morittu is often compared to Calaresu, another master knifemaker known for his attention to detail. A distinctive feature of his work is the exclusive use of "paired" horns for the handles, ensuring that there are never any visual disparities between the scales.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available unique specimen from 2010.
* Sharpening: Original, improvable
* Marks on blade: /
* Marks on handle: /
* Packaging: /
* Scabbard: Leather, handcrafted, in good condition.
* Manuals, Certificates and Warranties: Certificate of Authenticity.
* Checked and Certified by our in-house laboratory.

FRANCO VERNAZZA is a hobbyist knifemaker and by passion a member of A.C.H.I. (Associazione Coltellinai Hobbisti Italiani), this does not take away from his excellent knifemaking skills. He himself says he makes blades for passion, knives that do the job of cutting, everything else is a detail. The workmanship, all unique because he doesn't use jigs, is really good, completely Hand Made in Italy. 

Intended use: hunting / collection

Type of production: handmade
Country of production: Italy
Blade: stainless steel N690Co
Blade finish: horizontal satin finish and mirror polish
Handle: Olive wood with anodized Titanium guard
Blade length: 135mm.
Blade thickness: 3.5mm.
Total length: 255mm.
Weight: 151g.
Sheath: leather, handcrafted, hand-stitched
Packaging: /
Notes: previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: Discontinued, only made in 30 pieces
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Use: tactical, sporting, hiking, collection

Blade: integral, rolled Japanese stainless steel (San Mai) with 61.5HRC cryogenically hardened CoS cutting edge
Handle: forprene
Blade length: 90mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balance: set back 0.5cm. from the guard branch
Weight: 214g.
Sheath: ABS with multi-position Tek-Lok attachment
Notes:  new knife, withdrawn from private collections

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like new
* Commercially available unique specimen from 2009.
* Sharpening: Original
* Marks on blade: /
* Marks on handle: /
* Packaging: /
* Scabbard: Leather, handcrafted, in excellent condition.
* Manuals, Certificates and Warranties: Certificate of Authenticity.
* Checked and Certified by our in-house laboratory.

FRANCO VERNAZZA is a hobbyist knifemaker registered with A.C.H.I. (Associazione Coltellinai Hobbisti Italiani) and this creation of his is loosely inspired by Robert "Bob" Loveless' Bad Bob's Knife, his personal knife. Loveless' original was used during his time in Lawndale and is a unique piece of great historical importance. For that very reason it is so famous and published in tittie texts devoted to vintage custom cutlery.

Intended use: hunting/collecting

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co
Blade finish: mirror polish
Handle: European stag with escutcheon
Blade length: 115mm.
Blade thickness: 3mm.
Total length: 240mm.
Weight: 175g.
Sheath: handcrafted, hand-stitched, double-layer leather with quick belt attachment
Packaging: /
Notes: previously purchased knife from a private collection

Introducing the 99 Necron™, a high-performance butterfly knife with a focus on flipping, available in two highly customizable variations that pay homage to Benchmade's roots with a return to the classic shape of our Bali-Song with additional features. Optimized for experienced users, it has G10 handles without blade locks and scimitar-tipped CPM-S30V, the Necron™ can be adjusted in balance and speed with adjustable tungsten weights and extendable handles to achieve the perfect flip and desired feel.

Available with G10 handles and a trainer variant to master the technique, the Necron™ is finished with a hollow diamond texture found on the "safe" handle to give the user a tactile indication of which handle to grasp to avoid the sharp end of the blade.

Intended Use: Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-S30V
Blade finish: DLC Battlewash
Handle: G10 and Nylon
Blade length: 117mm.
Blade thickness: 3.15mm.
Length closed: 129mm.
Total length: 244mm.
Weight: 119g.
Closure: /
Clip: /
Scabbard: Nylon
Packaging: Cardboard box with Benchmade logos
Notes: includes tugnsten weights so you can vary the balance of the knife and spare nylon parts to shorten the handle

Introducing the 99 Necron™, a high-performance butterfly knife with a focus on flipping, available in two highly customizable variations that pay homage to Benchmade's roots with a return to the classic form of our Bali-Song with additional features. Optimized for experienced users, it has G10 handles without blade locks and scimitar-tipped CPM-S30V, the Necron™ can be adjusted in balance and speed with adjustable tungsten weights and extendable handles to achieve the perfect flip and desired feel.

Available with G10 handles and a trainer variant to master the technique, the Necron™ is finished with a hollow diamond texture found on the "safe" handle to give the user a tactile indication of which handle to grasp to avoid the sharp end of the blade.

Intended Use: Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-S30V
Blade Finish: Stonewashed
Handle: G10 and Nylon
Blade length: 117mm.
Blade thickness: 3.15mm.
Length closed: 129mm.
Total length: 244mm.
Weight: 119g.
Closure: /
Clip: /
Scabbard: Nylon
Packaging: Cardboard box with Benchmade logos
Notes: includes tugnsten weights so you can vary the balance of the knife and spare nylon parts to shorten the handle

Microtech Socom knives are named after the United States Special Operations Command, abbreviated to Socom; an operational command under the United States Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre with DLC treated screws
Blade length: 137mm.
Blade thickness: 4mm.
Total length: 265mm.
Weight: 212g. (273g. including scabbard)
Sheath: Carbon fibre Kydex, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

The J.Marttiini knife 1928-2018 90v. is a limited edition created to celebrate the 90th anniversary of J. Marttiini Knife Factory Ltd. Founded in 1928 by Janne Marttiini in Rovaniemi..

Knife numbered on the blade, series 1965 out of 2018 pieces produced

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased 
* Condition: Overall in very good condition
* Commercially available: no longer in production, difficult to find
* Sharpness: Original
* Marks on blade: No
* Marks on handle: No
* Box: No box
* Sheath: original brown leather
* Manuals, Certificates and Warranties: absent
* Checked and Certified by our internal laboratory

Intended use: hunting

Intended use: collection

Type of production: artisanal
Blade: Sandvik 12C27 stainless steel
Blade treatment: brut de forge
Blade production: Finland
Handle: ebony
Blade length: 110mm
Blade thickness: 2.5mm
Closed length: -
Total length: 225mm
Balancing: -
Weight: 140g
Closure: -
Clips: -
Sheath: leather sheath with engravings 
Note:

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: A few small marks given by being placed in the sheath.
* Marks on handle: A few small marks on the duralumin pommel.
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of manufacture: USA
Blade: carbon steel O-1
Blade finish: satin finish
Handle: leather rings with brass through-guard and duralumin tang
Blade length: 118mm.
Blade thickness: 4.5mm.
Total length: 230mm.
Balance: backward
Weight: 210g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 2014 knife overall in near new, unused condition, some minor marks on metal parts given by age
* Commercially available Discontinued.
* Sharpening: Factory sharpened, never used for cutting.
* Marks on blade: No
* Marks on handle: Some discoloration of laser engravings given by age.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Multirole

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade Finish: Desert Warfare
Handle: Anticorodal with stainless steel spacer
Blade length: 115mm.
Blade thickness: 6.3mm.
Total length: 260mm.
Weight: 245g.
Lock system: Back Lock with additional safety pin
Packaging: cardboard box with Extrema Ratio logos
Notes: Previously purchased discontinued specimen from a private collection. Full set, in near-new condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: January 2014 production, previously purchased.
* Condition: Brand new
* Commercially available: Discontinued and no longer available.
* Sharpening: Factory.
* Marks on blade: No
* Marks on handle: Small abrasions given by contact with scabbard.
* Box: Present and original
* Scabbard: Present and original
* Manuals, Certificates and Warranties: Warranty and maintenance sheet.
* Checked and Certified by our in-house laboratory



Intended Use: Heavy Utility

Production type: Midtech
Country of Production: USA
Blade: full tang in D2 steel at 59/60HRC
Blade treatment: Gunkote Green
Handle: polymer
Blade length: 115mm.
Blade thickness: 5.2mm.
Total length: 250mm.
Balance: advanced
Weight: 370g.
Sheath: polymer, with M.O.L.L.E. compatible multi-position attachments.
Packaging: cardboard box with Microtech logos, Maintenance and warranty information
Notes: produced in January 2014 - previously purchased - brand new

Alala - In ancient Greece, it meant "battle cry" or "war cry" and was the personification of the war cry in Greek mythology. ... Greek soldiers attacked the enemy with this cry to cause panic in their ranks. Its sturdy and comfortable design makes it a very comfortable everyday carry fixed blade with excellent ergonomics. Perfectly suited for daily cutting tasks, it is always ready to assist the user. The molded sheath is equipped with an active retention lever and a securing strap for convenient carry options. Made by the excellent people at KA-BAR Knives; in Olean, NY, USA.

Intended use: Tactical / Military

Production type: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 95mm.
Blade thickness: 4.8mm.
Total length: 200mm.
Weight: 135g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito/Carey - The Professional Grade series with a silver-colored box identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company founded by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in the USA production.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably from the late 1970s/early 1980s.
* Condition: In very good condition
* Commercially available On order, with waiting list.
* Sharpening: Factory original, can be improved.
* Marks on blade: Small horizontal marks due to insertion and removal from scabbard.
* Marks on handle: A few small marks on aluminum tang.
* Packaging: -
* Scabbard: Leather, handcrafted, original.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory



Intended use: hunting / fishing / light hiking

Type of production: handcrafted
Country of production: USA
Blade: O1 steel
Blade finish: satin finish
Handle: leather rings, brass guard, duralumin pommel
Blade length: 115mm.
Blade thickness: 3.8mm.
Total length: 230mm.
Weight: 130g.
Scabbard: handmade, leather, for vertical carrying on belt
Packaging: -
Notes: Specimen presumably late 1970s/early 1980s in excellent condition - previously purchased knife from a private collection

History of the Model
The Model 7 was designed as a scaled-down version of the Model 3 Hunter.

Almost immediately, the idea of a scaled-down version of the new Hunter dawned on Bo Randall as an ideal knife for his fellow anglers. An avid fisherman since his youth, Bo regarded this new knife as a labor of love and immediately set to work on the project. At first he tried 4- and 4.5-inch blades, but then opted for the 4 1/2-inch one. Bo wanted the right handle for cleaning brook trout and similar sized fish, so he reduced the size of the handle of the new Hunter and changed its shape. Naturally, he called this model the "Fisherman," and some early prototypes with 4-inch blades were delivered to some dealers during the latter part of September 1945.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Original packaging present
* Scabbard: Original scabbard present.
* Manuals, Certificates and Warranties: Certificate of Warranty and Authenticity present.
* Checked and Certified by our in-house laboratory



Intended use: sports/collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL-34 60HRC
Blade finish: dual tone (satin finish and microblading)
Handle: channel handles and titanium TI6AL4V inserts, ball bearing movement
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: 147mm.
Total length: 256mm.
Weight: 120g.
Closure: -
Clip: -
Sheath: Black leather pouch
Packaging: Leather pouch with zipper and certificate of authenticity and warranty made of steel, laser engraved
Notes: Designed and made entirely by hand in Italy by Davide Ceroni - Previously purchased 09/12/2021 specimen from private collection

The Kudu Hunter fixed-blade knife offers an excellent balance between form and function: the wide drop point blade is reminiscent of its predecessor model Harpoon, but without the dedicated thumb rest. The handle is extremely comfortable for different types of grips, and its shape does not cause fatigue during long periods of use. The Kydex scabbard has a Kydex belt loop that allows you to switch between normal belt carry and scout carry, right or left handed, with ease. This is truly an excellent "all-around" design by Andre.


Intended use: collection/sporting

Type of manufacture: midtech
Country of manufacture: South Africa
Blade: full tang, stainless steel M390
Blade treatment: Satin finish
Handle: Black G10
Blade length: 115mm.
Blade thickness: 4.8mm.
Total length: 228mm.
Balance: backward
Weight: 205g.
Sheath: carbon fiber-effect kydex with multi-position belt attachment
Packaging: -
Notes: designed and made entirely by Andre De Villiers

These high quality knives, are handcrafted in the tradition of French Thiers cutlery.

This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.

The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.

The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly. 

The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs. 

The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.

Intended Use: Regional/Collection/Outdoor/Hunting

Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -

Extrema Ratio S-THIL Black Warfare, a special version of the S-THIL model, is a backup knife with a monolithic structure machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with the designer Thilo Arnd Schiller. The spear point type blade is hardened to 58 HRC in order to obtain the best balance between edge retention and strength, has a false edge in the upper part which enhances the characteristics of penetration and tip work, and is equipped with a Full length furrow flowing elegantly from blade to grip.

The blade is milled integrally with the knife to enhance its compactness and lightness, maintaining a minimum thickness even with a profile that recalls the classic Extrema Ratio handle. This profile forms two small guards and a comfortable thumb rest in order to prevent the hand from slipping towards the blade. On the end there is a skull crusher with a diamond-shaped tip and a slot that allows you to attach a wrist strap to the knife or to equip the handle with paracord winding.

The special Black Warfare version uses the innovative and original Geotech Camo pattern, created by laser engraving. The molded nylon sheath has been designed to be extremely flat and with very small lateral dimensions, in order to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the cutting edge of the blade to the right or left. The double retention system integral with the sheath is made up of four pressure elements that work only two at a time, depending on right/left use, while in the nylon textile part there is a button that allows you to secure the knife to the sheath . The end of the sheath has a hole that allows you to expel liquids or residues inside. The possibility of applying belt clips, ulticlips, malice clips makes it extremely versatile. It is also possible to hook the sheath to the M.O.L.L.E. system. weaving the paracord lanyard.

The S-thil Black Warfare is supplied in an IP67 certified watertight Polypropylene technical case, with pressurization valve, resistant to atmospheric agents, dust and shocks. Inside there are also the Nylon sheath, the double ULTICLIP and the double grain sharpening plate (ceramic abrasive and synthetic diamond).

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade treatment: BURNISHING MIL-C-13924 GEOTECH CAMO
Handle: N690 steel
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: in Kydex, with double multiposition ULTICLIP attachment clip
Packaging: Polypropylene case with S-Thil / Extrema Ratio logos
Notes: exclusive briefcase to celebrate the company's 25th anniversary

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available: Discontinued, made in 2018 in only 300 pieces, individually numbered
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Original Nylon case with accessories.
* Scabbard: Not provided
* Manuals, Certificates and Warranties: Certificate with serial number and signature.
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Collection 

Type of production: Midtech (semi-craft)
Country of manufacture: Russia
Blade: stainless steel M390
Blade treatment: Bkacwashed
Handle: bronze anodized titanium with carbon fiber inserts
Blade length: 111mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 250mm.
Thickness when closed: 13mm.
Weight: 167g.
Closure: Frame Lock
Clip: titanium machined from solid, with Timascus insert
Notes: knife from private collection, previously purchased, made in only 300 individually numbered examples

Vintage knife produced in Portland in 1972 characterized by an extremely penetrating full flat type of sharpening, designed specifically for hunting use - Knife withdrawn from private collection - Overall in very good condition - Never used, a few small marks on the leather sheath, due to the passage of time - Free of packaging - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Collection / Vintage / Hunting

Type of production: industrial
Country of manufacture: USA
Blade: 440C stainless steel
Blade finish: mirror polish
Handle: stainless steel guard and pommel, brass spacers, macassar ebony handle
Blade length: 115mm.
Blade thickness: 3mm.
Total length: 225mm.
Balance: backward
Weight: 191g.
Sheath: leather
Packaging: -
Notes: Vintage knife from 1972 - Withdrawn from private collection globally in very good condition - Unpacked

Collected from a private collection, this Custom model of the American Buck made prior to 1986 is numbered on the blade with serial number 0023 - Never used and never resharpened, overall in excellent condition - Devoid of packaging and certificates, supplied with its own brown leather sheath - Distinguished by its full tang construction, prominent brass guard and beautiful stag handle with finger grooves - Checked and certified by our in-house laboratory Coltelleria Collini.

Intended Use: Collection / Hunting

Type of production: handcrafted
Country of production: USA
Blade: full tang in 420HC stainless steel with concave rounding
Blade finish: mirror polish
Handle: brass guard and deer handle with finger grooves
Blade length: 134mm.
Blade thickness: 5mm.
Total length: 258mm.
Weight: 325g.
Sheath: leather
Packaging: -
Notes: Pre-1986 specimen withdrawn from private collection - Custom series, numbered version on blade, specimen number 0023 - Never used, never resharpened, in excellent condition

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: Carbon steel 1095 56/58HRC
Blade Finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade Length: 139mm.
Blade Thickness: 4.8mm.
Total length: 273mm.
Weight: 255g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E. compatible belt clip and push-button retention system.
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Note: Design by Iovito/Carey - The Professional Grade series with Silver box, identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience in order to keep prices affordable to the public without having to renounce to a made in USA production.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: Carbon steel 1095 56/58HRC
Blade Finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade Length: 139mm.
Blade Thickness: 4.8mm.
Total length: 273mm.
Weight: 255g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E. compatible belt clip and push-button retention system.
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Note: Design by Iovito/Carey - The Professional Grade series with Silver box, identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience in order to keep prices affordable to the public without having to renounce to a made in USA production.

Intended Use: Collection / Utility

Production type: Industrial
Country of Production: Taiwan
Blade: ful tang in D2 steel
Blade finish: Satin finish
Handle: Micarta
Blade length: 134mm.
Blade thickness: 5mm.
Total length: 252mm.
Weight: 233g.
Sheath: Black leather
Package: gift box with certificate of guarantee and microfiber cleaning cloth.
Notes: Limited and numbered edition of 1999 pieces - Design by Jesper Voxnaes (Vox)

outdoor knife produced by Fox between the late nineties and 2004 - Sturdy and comfortable knife for camping and hiking use. This rare model is characterized by the coating of the blade with a titanium surface which technically increases the resistance to oxidation and to the thread holding. Complete with scabbard

Intended use: Sports

Blade: 440A stainless steel with titanium coating
Lama Italia production
Handle: pakkawood pledge
Blade length: 110mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 250mm.
Balancing: -
Weight: 285g.
Closure: Back Lock
Clip:
Sheath: Cordura sheath
Note: -

Japanese steel blends with Italian excellence

For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Col Moschin Compact model: for this First Production Run a run of 10 pieces numbered from 1 to 10 was created.

The lethality of the COL MOSCHIN knife in compact version. Supplied with rigid belt sheath and BELT-CLIP. The rigid sleeve can be positioned horizontally, vertically or in a 45 ° inclined position

Use: tactical, sports, hiking, collection

Blade: integral, in laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Handle: forprene
Blade length: 110mm.
Blade thickness: 6.5mm.
Total length: 212mm.
Balance: set back to 0.5cm. from the guard branch
Weight: 209g.
Sheath: ABS with multi-position Tek-Lok attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a thin surface of oil.

As in the ancient Japanese Samurai swords.

Rolled steel - imported into Italy by Collini Steel directly from Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Knife withdrawn from a private collection in like new condition - Thanks to the engraving next to the BUCK logo (X series) it is possible to go back to the 1991 year of production of the knife - Complete with box and scabbard - Checked, certified by our internal laboratory. Cutlery Collini

The Kalinga, model first produced by Buck in 1969, was a favorite of Al Buck. With a large skinner blade and an ergonomic design, the Kalinga remains in addition to an important piece to collect, also an excellent choice for hunting use.

Intended use: Sports / Collection

Type of production: Industrial
Blade production: USA
Blade: full tang, 420HC stainless steel
Blade treatment: -
Handle: Wood
Blade length: 115mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 255mm.
Thick when closed: -
Balancing: -
Weight: 322g.
Closing: -
Clip: -
Sheath: brown leather
Packaging: Cardboard box with Buck logos, with certificates
Note:

Collector's knife from a private collection - Model TTFF1 by Medford with custom Black Blood treatment and black coating of the sleeve by Dino Picco by Wander Tactical - Excellent condition with original box - Regrinded - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical / Collection

Type of production: Custom
Blade production: Usa
Blade: D2 steel
Blade treatment: -
Handle: aluminum and titanium
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 245mm.
Thick when closed: 13mm.
Balancing: on the guard branch
Weight: 252g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg Medford - Black Blood blade treatment and handle repainted by Wander Tactical designer Dino Picco

Intended use: Tactical / Heavy Duty

Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Black PVD
Handle: Titanium with bronze anodizing and black PVD shank
Blade length: 106mm.
Blade thickness: 5mm.
Length closed: 132mm.
Total length: 238mm.
Thick when closed: 15mm.
Weight: 172g.
Opening: through the Karst pinball system
Closing: Framelock in titanium
Clip: titanium, removable, flamed
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg Medford

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

SHRAPNEL OG model: for this First Production Run, a circulation of 10 pieces numbered from 1 to 10 was produced.

SHRAPNEL OG is a truly multi-purpose "back-up", with strong combat attitudes. The leaf blade is characterized by a wide flat winding, with a narrow sharpening angle which makes it particularly sharp. The rigid sheath can be positioned horizontally, vertically or inclined at 45 °. The SHRAPNEL OG is produced without the top guard.

Use: tactical, sports, hiking, collection

Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Handle: forprene
Blade length: 90mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: set back to 0.5cm. from the guard branch
Weight: 190g.
Sheath: ABS with Tek-Lok multiposition attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (V-Toku2, VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, reaches hardness and cutting performance significantly higher than that achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Intended use: Hunting / Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 127mm.
Blade thickness: 5mm.
Total length: 244mm.
Balancing: advanced
Weight: 168g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: satin
Grip: black G10 grips
Blade length: 130mm.
Total length: 260mm.
Blade thickness: 5mm.
Weight: 230g.
Sheath: black Cordura sheath with strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Mirror polished
Handle: Tip of bovine horn
Blade length: 112mm.
Blade thickness: 3mm.
Length closed: 143mm.
Total length: 255mm.
Weight: 80g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

Purpose of use: Collection / Sportsman / Machete

Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Paracord
Blade Length: 125mm.
Blade thickness: 5mm.
Closed length: -
Total Length: 245mm.
Closure thickness: -
Balance: -
Weight: 205g.
Closure: -
Clip: -
Sheath: IN LEATHER
Packing: Carton box
Notes: Hand made entirely by Takeshi Saji

Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years, he has worked with SOG, William Henry, Pro-Tech and Randall Kings for blades, sharpening and burring.

Purpose: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: acidification with subsequent polishing and polishing of the wire
Handle: G10
Blade Length: 135mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Weight: 186g.
Sheath: in thermoformed Kydex, with Tek-Lok attachment
Packing: cardboard box with Kiku Knives logos
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG Knives

For this new exclusive collaboration with Extrema Ratio we decided to propose a best seller in the world of cutlery, the Shrapnel model. It's a satin blade version but the most important thing is that has been used, for the first time in Italy, the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used the CoS (Cobalt Special, considered mechanically superior by 25% compared to the already appreciated VG10) for the central plate and the 420J2 (55 HRC) for the two side plates, in order to have a high cutting capacity, but at the the same time a remarkable resilience and resistance to oxidation.

A First Production Run of 30 pieces has been made.

SHRAPNEL OG is a truly versatile “back up” knife with marked combat qualities. Its leaf-shaped blade is flat ground at a characteristically low angle to a wide, extraordinarily sharp edge. The included hard sheath can be worn vertically, horizontally or obliquely (at a 45° angle). Tthe SHRAPNEL OG hilt design does not include a guard.

Use: tactical , sports , hiking , collection
Blade: Full , Japanese- rolled stainless steel ( San Mai) with sharp CoS to 61,7HRC in cryogenic tempering
Handle: Forprene
Blade length: 90mm.
Blade Thickness: 6.5 mm.
Overall length: 210mm.
Balancing: back to 0.5cm . by guard branch
Weight: 214g.
Sheath: ABS with Tek - Lok multi attack
Notes: cardboard box with Extremaratio logos and certificate

Clad Metal
It is a composite metal partly or entirely diffusion bonded together of different kinds of metals.

Metal composition shows higher performance which respective materials alone do not possess and the performance complements opposite characteristics of each material, that is "compound characteristics"

Clad Effect on Cutleries

Toughness
Like Japanese swords, clad metal is hard to break or bend, thanks to the toughness as the hard steel part is clad with soft steels.
Easy to work on
Cladded structure is easy to apply on such works as forging, grinding, sharpening or polishing to make a sharp blade.

Improved corrosion resistance　　　　
Proper material combination generates electrical potential difference and it enhances the corrosion resistance on blade edge.

Better and long lasting sharpness
Steel after forging pressure makes the microscopic structure denser and improves the sharpness and ensures long lasting performance.

Resource saving
As high class steel is used only for necessary part, it is perfectly cost effective..

Easy distortion correction
As the steel is bonded with soft steel materials, its blade is hard to break and the distortion correction is easy.

Easy drilling and welding after heat treatment
Though the steel gets harder after heat treatment, the soft steel never loses its softness, enabling the material to be drilled or welded.

Design improvement
Laminated patterns or Damascus patterns appear from basis materials which are bonded with different kinds of metals.