Led Flashlights Nitecore

TECHNICAL SPECIFICATIONS:

Led: 1x Luminus SST40 with a life cycle of 50,000 hours
Operating Modes: 4 light modes and 2 special modes, all electronically regulated
Powers and Durations: 2000 Lumens (45min.) -> 350 Lumens (6.30h) -> 50 Lumens (24h) -> 5 Lumens (200h) -> Beacon -> S.O.S.
Peak power: 15850 candles
Maximum lighting distance: 250m.
Lighting Method: Rear Button
Lighting selection method: Rear Button
Head: aircraft aluminum
Body: Plastic Material
Finish: Anodized, Type III
Lens: Polymeric
Batteries: (built-in, not removable): 1x 21700 3.6V 5000mAh
Measurements: 11.7cm (L) - 3.0cm (D shaft) - 3.0cm (D head) - 2.74cm (D tang)
Weight: 140g.
Accessories: USB-C to USB-C charging cable, wrist strap
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height

Actual power and durability, lab-certified by ANSI/PLATO FL1-2019 standard

KEY FEATURES
* Wide light, depth light and auxiliary red light with a maximum output of 2,000 lumens
* Uses 2x Luminus SST-40-W LEDs for both primary white lights
* The reflector uses a specially designed TIR optical lens for long-range illumination to provide a maximum range of 202 meters and a maximum beam intensity of 10,300cd
* The projector uses TrueVision technology for an ultra uniform beam pattern.
* Continuous light variation for both spotlight and projector (Patent No.: ZL201820778007.X)
* Highly efficient constant current circuit provides light output for up to 800 continuous hours.
* Intelligent lithium-ion battery charging circuit equipped with a USB-C charging port
* 180° tilt angle for different lighting needs
* A charge indicator under the "+" and "-" buttons indicates the remaining battery charge.
* Charge indicator can display battery voltage (±0.1V)
* Built-in ATR (Advanced Temperature Regulation) module (Patent No. ZL201510534543.6)
* Constructed of aircraft grade aluminum alloy
* Military grade HA III ultra durable anodized finish
* Waterproof as per IP68 standard (submersible up to 2 meters)
* Shock resistant up to 2 meters high

TECHNICAL FEATURES
LED: 2x Luminus SST-40-W with 50,000 hour life cycle
Output: 13x digitally controlled light output and 3 signaling modes
Powers and duration spot light: 1 lumen (800h.) -> 50 lumens (28h.) -> 250 lumens (6h.) -> 950 lumens (2.30h.) -> 1800 lumens (30*min. - without taking into account automatic temperature control) -> 2000 lumens (Turbo)
Flood light powers and duration: 1 lumen (800h.) -> 45 lumens (28h.) -> 220 lumens (6h.) -> 850 lumens (2.30h.) -> 1400 lumens (30*min. - without taking into account automatic temperature control) -> Beacon -> S.O.S.
Powers and durations auxiliary red light: 3 lumens (110h.) -> 11 lumens (30h.) -> flashing at 11 lumens (160h.)
Range: up to 202mt.
Peak power: 10300 candles
Usable batteries: 1x 18650HP 3.6V (included in the package) or 2x CR123A 3.0/3.7V disposable or rechargeable
Flashlight dimensions: 91.5x34.75x26.5 mm. 
Weight: 70g (without battery)
Lens: TIR type, in shockproof plastic material
Body: aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Included Accessories: 1x Battery 18650 NL1835HP 3.6V and 3500mAh - USB charging cable - elastic front strap - front bracket
Integrated Charging System: through the integrated USB-C port - protected by an insulated cover - and using the USB cable provided as standard you can provide for charging the battery supplied, the operation is monitored by a special LED light located next to the buttons of selection light. The charging cable can be attached to any PC equipped with USB port or to any wall or cigarette lighter power supply equipped with USB port.
Notes: waterproof and submersible as per IP68 standard - 1750 lumens of power are achievable only by using a battery with a discharge power equal to or greater than 8A (insluded); using different batteries, the maximum power will be limited to 900 lumens.

ANSI/PLATO FL1-2019 standard certified power and duration tested with 1x 18650 HP 3500mAh

Equipped with 4 CREE XP-G3 LEDs with a lifespan of 50,000 hours, the NPL30 has an output of 1200 lumens, a peak intensity of 3,300 cd and a shooting depth of 113 meters. It is powered by 2 CR123A batteries (included) with a maximum autonomy of 1 hour and 45 minutes. Both switches can perform the same functions to provide ambidextrous light activation. Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and triple press one of the power buttons for STROBE mode, which uses randomly changing frequencies for stronger dizzying effects.

There is the standard Picatinny rail mount for quick mounting and compatible with firearms with universal Picatinny rails. Electronic reverse polarity protection ensures safe and stable use. Built-in ATR technology adjusts the NPL30's output based on working conditions and environment to maintain optimum performance. It has an ultralight weight of 130g (4.59oz) (including battery), IP66 waterproof and 1m impact resistant.

Led: 4x Cree XP-G3 - with a life cycle of 50,000 hours
Operating Modes: Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and press one of the power buttons three times for the STROBE mode, which uses frequencies that change randomly for stronger dizzying effects.
Powers and Durations: 1200 lumens (1.45h) Strobo 1200 lumes
Power peak: 3300 cd
Maximum illumination distance: 113m.
Ignition method: double switch, ambidextrous, placed on the sides of the flashlight
Light variation method: double switch, ambidextrous, placed on the sides of the flashlight
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: works with two CR123A batteries (included in the package)
Measurements: 8.1cm (Length) - 3.8cm (Width) - 3.5cm (thickness, sled included)
Weight: 130g. with battery inserted
Accessories: o-rings
Water resistance: as per IP66 standard
Impact resistance: withstands drops from 1m. in height
Notes: Universal quick coupling slide, compatible with Picatinny and Weaver systems

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port
* NITECORE 21700 rechargeable 5,000mAh battery included in the package.
* Uses a CREE XHP35 HI LED with a maximum power of 2,000 lumens
* Maximum luminous intensity in the central point of 250,000cd. and maximum range of 1,000 meters.
* Glass and dishes with anti-reflection, crystal coating and PDOT (Precision Digital Optics Technology) treatments.
* USB-C remote control included in the package easily applicable that allows fixed light, temporary, strobe and change of powers.
* Built-in potentiometer with indicator light showing the remaining battery charge and voltage.
* Constructed of solid aircraft-grade aluminum alloy with military-specification anodization
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LED: 1x CREE XHP35 HI with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Beacon, Turbo and Strobe (the latter only using the remote control)
Powers and Duration: 2000 lumens (30min.) -> 1000 Lumens (1h 30min) -> 385 Lumens (4h) -> 85 Lumens (18h) -> 6 Lumens (100h) -> Beacon -> SOS
Peak power: 250000 candles
Maximum Lighting Distance: 1000m
Lighting Method: Rear Button with "Momentary On" system for light signal or by remote control
Light selection method: With the flashlight on, by pressing the front button "Mode" or by remote control
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-reflective treatment
Batteries: works with a rechargeable 21700 rechargeable battery "i-generation" (NL2150HPi, 5,000mAh) included in the package. If necessary it can also work with 2x CR123 3.0V but without being able to reach 2000 lumens of power
Measurements: 17.7cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 255.5g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, clip, RSW2i remote control, USB charging cable
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: cordura, belt, with velcro closure
Impact resistance: it resists falls from 1m height

Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months

AVAILABILITY AVAILABLE FOR DELIVERY: from 20 July

ULTRAVIOLET LAMP WITH OZONE - STERILIZING SURFACE MAX 40m²

Key features:
* Removes up to 99.99% of spores, germs, viruses and bacteria. The lamp modifies pathogenic microorganisms, viruses, molds through UV light, DNA or RNA, preventing them from reproducing or being harmful. Ozone is a very active oxidant that destroys contact microorganisms, in addition ozone also acts as an environmental deodorant. One of the advantages of ozone is that it can be transported by air to places that UV radiation cannot directly reach.
* Effective against Coronavirus, Mushrooms, Rickettsia, Chlamydia etc.
* Broad spectrum, high potency germicide
* Sanitization with automatic shutdown for 15, 30 or 60 minutes
* Radial quartz lamps with UV-C ultraviolet technology
* Emission of O3 ozone cells for additional sterilization
* Radiation wavelength of 185nm and 254nm
* Simplified design for maximum functionality
* Easily transportable and positioned on flat or hanging surfaces
* Operating commands on the support base or by remote control
* Delayed start to allow the operator to safely leave

Sanitizing applications:
* Home environments
* Commercial structures (shops, offices, restaurants etc)
* Cold rooms
* Food processing plants
* Medical offices, veterinarians, hospitals and operating rooms
* Odor removal

Operating principles:
Germicidal lamps generate short-wave radiation of 185nm radially which, passing through the purest quartz, generate ultraviolet type C (UV-C) waves that are lethal to microorganisms. All surfaces touched directly by ultraviolet waves are therefore sterilized.
At the same time, radiation of 253.7nm produces abundant quantities of ozone (O3) in the surrounding air which, as a very active oxidant, destroys the microorganisms with which it comes into contact. This allows effective sterilization even on surfaces not directly touched by UV-C waves and on all textile surfaces, penetrating deeply and simultaneously eliminating any type of odor, acting as an environmental deodorant.

Technical data:
* Model: ZWXTD-02
* Body material: painted steel
* Lamp material: quartz
* Rated power: 40W
* Sterilizable surface: <40m²
* Operating voltage: 220V / 50Hz
* 40W lamp dimensions: 180x470 mm.
* Lamp weight 40W: 1030 g.
* Life cycle:> 8000 hours
* Control method: on the base or via remote control
* Power on: delayed by 10 seconds
* Operating timer: 15, 30 and 60 minutes

Manual or remote control operation:
1) Plug in the power outlet
2) press the button with the desired sterilization time
3) after 10 seconds, the lamp will turn on and remain active for the set time
ATTENTION: during sterilization the room must be left free by people and animals
4) at the end of the sterilization time, the lamp will automatically turn off
ATTENTION: before staying, ventilate the rooms for at least 40 minutes

Precautions for use:
* The lamp in operation emits ultraviolet radiation, dangerous for exposure, and ozone, dangerous for inhalation.
* Use only in unmanned rooms
* Dangerous for humans, animals and plants
* Do not look directly into ultraviolet light to avoid damage and photodermatitis
* Do not stand near the operating lamp
* Prolonged exposure to ultraviolet light can cause aging and burns to the skin
* Prolonged exposure to ozone can cause asthma and irritation to the respiratory tract
* Ventilate the room before staying to allow the ozone to escape
* Ozone can remain in the room for up to 30/40 minutes after the lamp is turned off

AVAILABILITY AVAILABLE FOR DELIVERY: from 20 July

ULTRAVIOLET LAMP WITH OZONE - MAX STERILIZING SURFACE 100m²

Key features:
* Removes up to 99.99% of spores, germs, viruses and bacteria. The lamp modifies pathogenic microorganisms, viruses, and molds through light, DNA or RNA and therefore prevents them from reproducing or being harmful. Ozone is a very active oxidant that destroys contact microorganisms, in addition ozone also acts as an environmental deodorant. One of the advantages of ozone is that it can be transported by air to places that UV radiation cannot directly reach.
* Effective against Coronavirus, Mushrooms, Rickettsia, Chlamydia etc.
* Broad spectrum, high potency germicide
* Sanitization with automatic shutdown for 15, 30 or 60 minutes
* Radial quartz lamps with UV-C ultraviolet technology
* Emission of O3 ozone cells for additional sterilization
* Radiation wavelength of 185nm and 254nm
* Simplified design for maximum functionality
* Easily transportable and positioned on flat or hanging surfaces
* Operating commands on the support base or by remote control
* Delayed start to allow the operator to safely leave

Sanitizing applications:
* Home environments
* Commercial structures (shops, offices, restaurants etc)
* Cold rooms
* Food processing plants
* Medical offices, veterinarians, hospitals and operating rooms
* Odor removal

Operating principles:
Germicidal lamps generate short-wave radiation of 185nm radially which, passing through the purest quartz, generate ultraviolet type C (UV-C) waves that are lethal to microorganisms. All surfaces touched directly by ultraviolet waves are therefore sterilized.
At the same time, radiation of 253.7nm produces abundant quantities of ozone (O3) in the surrounding air which, as a very active oxidant, destroys the microorganisms with which it comes into contact. This allows effective sterilization even on surfaces not directly touched by UV-C waves and on all textile surfaces, penetrating deeply and simultaneously eliminating any type of odor, acting as an environmental deodorant.

Technical data:
* Models: ZWXTD-04
* Body material: steel
* Lamp material: quartz
* Rated power: 75W
* Sterilizable surface: <100m²
* Operating voltage: 220V / 50Hz
* Lamp dimensions 75W: 200x665 mm.
* Lamp weight 75W: 1380 g.
* Life cycle:> 8000 hours
* Control method: on the base or via remote control
* Power on: delayed by 10 seconds
* Operating timer: 15, 30 and 60 minutes

Manual or remote control operation:
1) Plug in the power outlet
2) press the button with the desired sterilization time
3) after 10 seconds, the lamp will turn on and remain active for the set time
ATTENTION: during sterilization the room must be left free by people and animals
4) at the end of the sterilization time, the lamp will automatically turn off
ATTENTION: before staying, ventilate the rooms for at least 40 minutes

Precautions for use:
* The lamp in operation emits ultraviolet radiation, dangerous for exposure, and ozone, dangerous for inhalation.
* Use only in unmanned rooms
* Dangerous for humans, animals and plants
* Do not look directly into ultraviolet light to avoid damage and photodermatitis
* Do not stand near the operating lamp
* Prolonged exposure to ultraviolet light can cause aging and burns to the skin
* Prolonged exposure to ozone can cause asthma and irritation to the respiratory tract
* Ventilate the room before staying to allow the ozone to escape
* Ozone can remain in the room for up to 30/40 minutes after the lamp is turned off

NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

LED: 1x Cree XM-L2 U2 with a lifespan of 50,000 hours
Output 5 constant light outputs, digitally adjusted and selectable by pressing the appropriate switch mode button and 3 signals (police warning, S.O.S., location beacon)
Powers and durations: 1 lumen (680h.) -> 40 lumens (26h.) -> 250 lumens (6.30h.) -> 450 lumens (2.15h.) -> 1200 (45min.)
Range: up to 130mt.
Peak of power: 4240 candles
Usable batteries: 1x 3.7V 18650 (included in the package) or 2x 3.0 / 3.7V disposable or rechargeable CR123A
Torch dimensions: 86x35 mm.
Weight: 70g (without battery)
Lens: in hardened glass with anti-reflection treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Notes: water resistant as per IPX-7 standard
Accessories: 1x 3400mAh 3.7V 18650 battery - USB charging cable - front elastic strap - spare o-ring
Integrated Charging System: through the integrated USB-C port - protected by an insulated cover - and using the USB cable supplied as standard, it is possible to recharge the supplied battery, the operation can be monitored thanks to a special LED light placed next to it. below the light selection buttons. The charging cable can be attached to any PC with a USB port or to any wall or cigarette lighter power supply with a USB port.

Powers and durations certified by ANSI / PLATO FL1-2019 standards tested with 1x 18650 3400mAh