Spade, katana, oggetti collezione
-
Lord of the Rings - Ciondolo di Arwen 704.75 - Il Signore degli Anelli
Evenstar, il bellissimo pendaglio che Arwen dona ad Aragorn come pegno di amore. Lui ama custodirlo gelosamente serbandolo sempre con se, per ricordarsi del suo elfico amore che ha rinunciato alla vita eterna per lui. Difendendo il popolo di Edoras, gli viene strappato da un orco sul campo di battaglia; Legolas lo recupererà per riconsegnarglielo alla corte di Rohan.
Questo bellissimo ciondolo è prodotto in metallo anallergico bagnato in argento, con sette pietre swarovski di colore bianco.
Viene accompagnato da una confezione composta da uno scrigno cartonato raffigurante l'immagine della Terra di Mezzo, un sacchetto in velluto con impresso il logo "The Lord of The Rings" e un certificato che ne garantisce l'autenticità.
E' un prodotto accompagnato da licenza ufficiale New Line Cinema
Misure: 6 x 3 x 1.3 cm.4516 -
Lord of the Rings - Collana di Arwen a Farfalla Elfica - Il Signore degli Anelli
Riproduzione ufficiale della collana di Arwen, dietro concessione della "New Line Cinema"
Realizzata in argento
Certificato di autenticità New line Cinema
Arwen era la figlia più giovane di Elrond e Celebrían; i suoi fratelli maggiori erano i gemelli Elladan e Elrohir.
Come è narrato ne "La Storia di Aragorn e Arwen", che si trova nell'Appendice A de Il Signore degli Anelli (dopo il terzo volume, Il Ritorno del Re), quando Aragorn aveva vent'anni incontrò Arwen per la prima volta a Gran Burrone, dove egli viveva sotto la protezione di Elrond. Arwen, che allora aveva oltre 2700 anni, era recentemente ritornata alla casa di suo padre dopo aver vissuto per un po' con sua nonna Galadriel a Lórien. Aragorn s'innamorò di Arwen a prima vista. Circa trent'anni dopo, i due si ritrovarono a Lórien; quella volta, Arwen ricambiò l'amore di Aragorn; allora "si giurarono eterna fedeltà" sulla collina di Cerin Amroth.4676 -
Lord of the Rings - Collana di Rivendell 723.45 - Il Signore degli Anelli
Riproduzione ufficiale italiana dietro licenza "New Line Cinema"
Il ciondolo della collana, largo 40mm e lungo 70mm, è realizzato in metallo anallergico con 3 crisalli sintetici di color ambra. La collana ha un diametro di 200mm.
Viene accompagnata da una confezione regalo rettangolare di colore nero con logo "The Lord of The Rings" impresso in oro.4546 -
Lord of the Rings - Orecchini di Rivendell 724.45 - Il Signore degli Anelli
Riproduzione ufficiale italiana dietro licenza "New Line Cinema"
Gli orecchini, di 20 mm di diametro, sono realizzati in metallo anallergico e crisalli sintetici di color ambra.
Vengono accompagnati da una confezione regalo rettangolare di colore nero con logo "The Lord of The Rings" impresso in oro.4544 -
Lord of the Rings - Orecchini Foglia Elfica 702.50 - Il Signore degli Anelli
Riproduzione ufficiale italiana dietro licenza "New Line Cinema"
Gli orecchini, larghi 25mm e lunghi 35mm, sono realizzati in metallo anallergico ricoperti di argento e successivamente smaltati a caldo di verde
Vengono accompagnati da una splendida confezione composta da una scatola cartonata che rappresenta la mappa della terra di mezzo ed un sacchetto di velluto nero con il logo "The Lord of The Rings" impresso in oro.
Il prodotto viene inoltre accompagnato da un certificato che ne attesta l'autenticità e ne garantisce le origini.4509 -
Lord of the Rings - Ring of Power inc. Red 18mm 99 / P.01 - The Lord of the Rings
Riproduzione ufficiale italiana dell'Anello del Potere, dietro concessione della "New Line Cinema"
L' Anello ha delle incisioni rosse in elfico all'interno ed all'esterno, è realizzato in fusione metallica placcata oro 24K ed è fornito di catenina
Viene accompagnato da una confezione composta da uno scrigno in cartone raffigurante l'immagine della ""Terra di Mezzo"", un sacchetto in velluto con impresso il logo "The Lord of The Rings" e un certificato di autenticità.
Diametro anello 18mm indossabile al dito4505p -
Marto - Conan - Father's Sword Collectors Edition - spada fantasy
Riproduzione "Collectors Limited Edition" Marto della spada ufficiale del padre di Conan, tratta dal film "Conan il Barbaro"
Lama in acciaio 440 con impugnatura in cuoio, precisa cesellatura dell'elsa in bronzo con profonde incisioni sulla lama.
Lunghezza lama: 73 cm
Lunghezza totale: 96 cm
Peso: 2.5 kg circa
Corredata di scatola in legno con lacci di cuoio e certificati di autenticità.3217 -
Marto - Excalibur Argento - 752 - spada storica
La storia e la leggenda di Re Artù sono intimamente legate alla magica e misteriosa spada Excalibur e Marto ce la ripropone in questa splendida riproduzione espositiva.
La lama è in acciaio inox 440 non affilata, decorata fino al primo terzo. Il fornimento è in metallo fuso con dettagli decorativi placcati in oro.
L'impugnatura è rivestita di pelle nera.
La lunghezza totale è di 120 cm.
0506 -
Marto - Spada di Re Salomone 586.2
Spada prodotta in Spagna a Toledo
Salomone, re d'Israele (X secolo a.C. ca.) . La storia narra di un processo in cui due donne si contendevano un bambino. Re Salomone dette la sua spada a un soldato ordinandogli di tagliare il bambino in due, dandone metà a ciascuna madre per accertarsi di chi fosse il figlio. In questo modo il re riconobbe quale delle due donne mentiva, mostrando il suo buon senso e la sua imparzialità. La lama è in acciaio decorata fino a un terzo e il fornimento in metallo placcato in argento e nel pomo è inscritta la stella di David.
- Lama in acciaio 420 non affilata - Lunghezza totale cm 120 - Elsa in metallo con impugnatura in cuoio - Precisa lavorazione e curata cesellatura nell'elsa.0559 -
Maserin - Diabolik knife Special Edition 50th - 999 - knife
For the fiftieth anniversary of the birth of Diabolik , one of the most loved by fans of comics noir , the cutlery Maserin , in collaboration with the publishing house Astorina , have created a version of " replica " of the famous knife throwing of the King of Terror . Weapon of choice by the character created in 1962 by the imagination of the Giussani sisters , the dagger "Diabolik Special Edition" Maserin replica of the features and style of the original knife , inseparable companion of many adventures Man of a Thousand Faces .
Type of production : Industrial
Production Blade: Italy
Blade: Stainless Steel 440 blunt
Treatment Lama : -
Handle material: TPE
Blade length : 160mm .
Blade thickness : 3.5mm .
Length closed: - mm .
Total length : 275mm .
Thick when closed: - mm .
Balance: -
Weight: 210g .
Closing: -
Clip: -
Sheath: nylon , Made in Italy , by Radar
Packaging : cardboard box with logos and Maserin Diabolik
Note : Product Exhibition / collectible officially licensedMA-999 -
Museum Replicas Windlass - Conan - Father Sword Bronze - 884017 - fantasy sword
Faithful official reproduction of Conan's Father's sword, taken from the movie "Conan the Barbarian"
Handcrafted by Windlass Steelcrafts® expert blacksmiths
- Blade in 1085 high carbon steel hardened to 52 HRC
- handle: in leather with knob and finely chiseled bronze hiltBlade length: 72 cm
Total length: 96
Weight: about 2.36 kg
Blade thickness: 4mm
Edition accompanied by certificates of authenticity.© 2011 Conan Properties International, LLC. Conan ®, Conan the Barbarian ®, and all related logos, characters, names, and distinctive likenesses thereof are trademarks of Conan Properties International LLC unless otherwise noted. All Rights Reserved. Museum Replicas Limited Authorized User.
884017 -
Museum Replicas Windlass - Dress for baby monaco 100794 - Medieval clothing
Dress for baby monaco 100794 - Medieval clothing
This costume monaco, already seen in the movie "The Crimson Rivers" with Jean Reno or in the movie "The Name of the Rose" with Sean Connery, releases mystery and religiosity and conveys a great magnetism towards the wearer.
This dress is designed for children aged 7 to 13 years.
Completely made of heavy brown cotton, has a hood and rope belt.100794 -
Museum Replicas Windlass - Lorica Segmentata300176 - armatura romana - abbigliamento
Armatura romana da legionario indossabile realizzata in acciaio.
La lorica segmentata, cosiddetta dagli studiosi a partire dal periodo del Rinascimento, è la corazza che nell'immaginario collettivo viene più facilmente associata al legionario romano.Questo tipo di corazza risultava più leggera della Lorica Hamata, ma meno confortevole rispetto a quest'ultima pur mantenendo liberi i movimenti di torso e braccia, costituiva però una pesante protezione che appesantiva decisamente il combattente.La Segmentata offriva una ottima protezione contro la maggior parte dei colpi di frecce e spade, soprattutto provenienti dall'alto.
Tuttavia la sua struttura fatta di cuoio e cerniere di bronzo e orichalcum, una lega simile al moderno ottone, la rendeva più difficilmente mantenibile per il fatto di necessitare di pezzi di ferro laminato interi.
Questo potrebbe spiegare in parte i motivi per cui in epoca tarda fu abbandonata a favore delle antiche Hamatae, per il vero mai dismesse.300176 -
Museum Replicas Windlass - Tunica Crusade Hospital 100590 + 100588 Hood and Belt - Medieval clothing
Museum Replicas Windlass - Tunica Crusade Hospital 100590 + 100588 Hood and Belt - Medieval clothing
Worn by the crusaders of the hospital, this long brown cotton tunic has a large white cross embroidered on the chest and a flashy belt rope.
And 'completed by strips of chain mail antiqued to give the illusion of wearing a complete armor beneath his tunic knit.
The tunic also comes complete with a heavy cotton hood with cross embroidered on the left shoulder.
Material: 100% cotton100588 -
Sideshow Weta - Statua del Re dell'esercito dei morti - Il Signore Degli Anelli
Sideshow/Weta
Azienda californiana nata nel 1993 come realizzarice di effetti speciali cinematografici che nel 1994 inizia anche a produrre miniature da collezione per varie marche. Nel 1999 decide di mettersi in proprio e lanciare la propria linea di miniature che, fin da subito, si distinguono per un'elevatissima cura realizzativa. Nel 2000 realizza una partnership con la neozelandese Weta Workshop per progettare e realizzare effetti di make-up, armi, armature e miniature per il regista de "Il Signore degli Anelli" Peter Jackson; partnership che nel 2001 si è estesa alla produzione di miniature da collezione in resina dedicate a tutto l'universo di Tolkien.
The King of the Dead
Scultura dietro licenza New Line Cinema
Edizione limitata e dipinta a mano
Prodotto: Statua in resina
Dimensioni: 31x41x27 cm.4554 -
United - Metal Glo - Professional Polishing Paste - UC2723
Tubo da 50g. di pasta pulente non abrasiva adatta a rimuovere ossidazione, ruggine, calcare, unto, sporco e piccoli graffi lasciando inoltre un piccolo velo protettivo sulla luperficie trattata.
Perfetta per la pulizia delle superfici metalliche: ottone, rame, bronzo, oro, argento, superfici cromate, peltro, nickel, acciaio inos, acciaio al carbonio, alluminio, magnesio.
Adatto inoltre a qualsiasi tipo di superficie non porosa come la porcellana, la fibra di vetro, il plexiglas, la plastica e le superfici verniciate.7206 -
United - Sting sword of Bilbo Beggins - The Hobbit - fantasy sword
Sting - Sword of Bilbo Baggins - The Hobbit Version
In the Third Age of Middle-earth, the Hobbit Bilbo Baggins was unexpectedly swept into an epic quest to reclaim the lost Dwarf Kingdom of Erebor, which was long ago conquered by the dragon Smaug. Approached out of the blue by the wizard Gandalf the Grey, Bilbo found himself joining a company of thirteen dwarves led by the legendary warrior, Thorin Oakenshield.
In this harrowing journey Bilbo and his Company of Dwarves came upon a troll lair in Rhûdaur. There they found two Elven swords, Glamdring, and Orcrist, and a knife. Bilbo claimed the knife for himself, and it was more of a sword to someone of his stature. He wielded the sword through most of the quest, famously using it against the Giant Spiders of Mirkwood to save the Company of Dwarves. After Bilbo had slain his first spider he declared, "I will give you a name, and I shall call you Sting."
This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop of New Zealand and used in the motion picture, THE HOBBIT: AN UNEXPECTED JOURNEY. United Cutlery, industry leader in fine movie reproductions, has meticulously recreated the prop using only the finest grade materials and craftsmanship. Close attention to detail was a top priority. The Sting sword is 22 1/4" overall, featuring a stainless steel blade and, solid metal hilt parts, and an intricately detailed vine adorning the grip. It is presented with a wood wall display featuring graphic motifs from The Hobbit: An Unexpected Journey, and includes a certificate of authenticity.
UC2892 Sting - Sword of Bilbo Baggins
Includes a parchment certificate of authenticity.
Overall Length: 22-1/4"
Blade Length: 15-3/8"
Blade Material: AUS-6 Stainless Steel
Handle Material: Solid Metal Guard and Pommel
Display: Wood with Wood Grain Finish and Silk Screen GraphicUC2892 -
Warlords - Elven War Dagger - armi in lattice
Le armi Warlords Collection, sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo da vivo.
Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato.
- Elven War Dagger
Pugnale elfico, buona bilanciatura ed eccellente controllo
- Caratteristiche
materiali: tubo in fibra di carbonio rivestito con schiuma poliuretanica ad alta densita
Lunghezza Totale: 47cm.
Peso: circa 171g.6905Special Price €44.26 Regular Price €49.18Only 3 left -
Warlords - Kingslayer Sword - armi in lattice
Le armi Warlords Collection, sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo da vivo.
Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato.
- Kingslayer sword
Robusta spada da guerra a due mani, bilanciata e maneggevole
- Caratteristiche
materiali: tubo in fibra di carbonio rivestito con schiuma poliuretanica ad alta densita
Lunghezza Totale: 119cm.
Peso: circa 460g.6909Special Price €84.83 Regular Price €94.26Only 3 left -
Warlords - Orc War Axe - armi in lattice
Le armi Warlords Collection, sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo da vivo.
Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato.
- Orc War Axe
Imponente ascia da guerra orchesca, ottima bilanciatura ed eccellente controllo
- Caratteristiche
materiali: tubo in fibra di carbonio rivestito con schiuma poliuretanica ad alta densita
Lunghezza Totale: 87cm.
Peso: circa 399g.6899Special Price €60.49 Regular Price €67.21Only 3 left -
Warlords - Paladin Shield - armi in lattice
Le armi Warlords Collection, sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo da vivo.
Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato.
- Paladin Shield
Imponente, elegante e robusto scudo elfico. Ottime finiture
- Caratteristiche
materiali: tubo in fibra di carbonio rivestito con schiuma poliuretanica ad alta densita
Lunghezza Totale: altezza 66cm. x larghezza 57 cm
Peso: circa 700g.6889Special Price €88.52 Regular Price €98.36Only 1 left -
Warlords - Vanquisher Battle Axe - armi in lattice
Le armi Warlords Collection, sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo da vivo.
Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato.
- Vanquisher Battle Axe
Massiccia ascia da battaglia a una o due mani. Ottima bilanciatura ed eccellente controllo
- Caratteristiche
materiali: tubo in fibra di carbonio rivestito con schiuma poliuretanica ad alta densita
Lunghezza Totale: 99cm.
Peso: circa 399g.6897Special Price €86.31 Regular Price €95.90Only 1 left -
Windlass - Crusader Priest Robe
This holy follower wears both the blood red front tabard of the Crusades, while also the gold embroidered lion rampant of King Richard. Full pure white cotton robe with matching hood and cap. Heavy gold applique adorns the sleeves. Dry clean only. Choose S/M or L/XL. Key Features Licensed from the video game 'Assassin's Creed' Top quality construction and fabric Worn by the Crusader Priest883010 -
Hollywood Collectibles Group - Rambo 5 knife - Last Blood BOWIE - knife
Original and official reproduction under film license of the knife used in the Rambo film - Last Blood
Intended use: Survival/Collection
Blade: 420 stainless steel.
Handle: synthetic
Blade length: 200mm.
Blade thickness: 5.5mm.
Total length: 360mm.
Balancing: advanced
Weight: 650.
Sheath: in leather
Notes: Standard Edition - Official product with Lionsgate cinema licensesRB9416 -
Kill Bill - Hattori Hanzo - Bride Sword Damascus blade - Practical Katana
Faithful unofficial reproduction of the sword used in the film Kill Bill
Blade: folded carbon steel - not sharp
Hamon: in style to note
Hi: -
Blade length (without habaki): 70cm.
Motohaba: 3.1cm.
Sakihaba: 2.1cm.
Sori: 2cm.
Blade thickness: 8mm.
Kissaki: 4cm.
Tsukamaki length: 26cm.
Total length: 103cm.
Weight: 1136g.
Balance: advanced, 12cm from tsuba
Saya: black lacquered wood with gold-colored engravings
Tsuka-gawa: black leather on same (ray skin) white
Sageo: gold cotton
Tsuba, Fuchi and Kashira: antiqued metal with gilding
Habaki and Menuki: golden metal
Seppa: golden metal
Notes: removable with double mekugi - the sword is accompanied by a cotton bag - wooden support and maintenance kit - This sword is not accompanied by film licenses but we offer it anyway resulting in a good quality levelSmall technical glossary: Hamon: temper line on the blade * Hi: deep groove in the blade, also called blood-cola * Saya: sword sheath * Tsuka: handle * Tsukamaki: weave on the handle * Tsuka-Ito or Tsuka-gawa: webbing cotton, silk or leather that wraps the handle * Tsuba: guard * Fuchi: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which the Sageo is linked * Motohaba: height of the habaki blade * Sakihaba: height of the kissaki blade.
40108€229.51Only 0 leftOut of stock -
United - Ranger Sword of Strider - The Lord of the Rings - UC1299 - fantasy sword
United Cutlery presents the Ranger Sword of Strider (in Italian Granpasso), a collectible reproduction of the sword featured in the Lord of the Rings films.
Strider (whom we will learn to know in the course of the events as Aragorn) is the son of Arathorn and heir to the Kingdom of Gondor. His ancestor, Isildur, was the king who cut the Ring of Power from Sauron's hand with the sword Narsil.
Includes a parchment certificate of authenticity.
Total length: 120 cm
Blade length: 91.44 cm
Blade thickness: 0.64 cm
Blade material: 420 J2 stainless steel
Handle: cast metal guard and pommel with antiqued finish and genuine leather-covered handle.
Display plate: wall-mounted, for vertical display, made of screen-printed woodThis sword is an official item manufactured by United Cutlery under official delal license from New Line Cinema!
UC1299 -
United - Guthwine sword of Eomer - The Lord of the Rings - UC3383 - fantasy sword
Éomer was a captain of the king's cavalry, Marshal of the Brand and one of the most powerful warriors of Rohan. He skillfully wielded his royal sword, Gúthwinë especially against Orcs and Uruks of Isengard who dared to trespass on Rohan. He fought bravely alongside King Theoden against the forces of Mordor in the Battle of Helm's Deep and the Fields of Pelennor. In the final battle against the dark lord Sauron, Éomer fought alongside Aragorn with the armies of Rohan and Gondor at the Gates of Mordor.
This authentic and detailed replica is a reproduction of the real prop built by Weta Workshop and used in The Lord of the Rings films presented by New Line Cinema. This 34-inch long sword was made using only the finest materials and craftsmanship available. It features cast metal hilt parts with a brass finish, a genuine leather-covered handle, and a 27-inch stainless steel blade with engraved grooves.
Includes a parchment certificate of authenticity.
Total length: 86.36 cm
Blade length: 68.58 cm
Blade thickness: 0.64 cm
Blade material: 420 J2 stainless steel
Handle: cast metal guard and pommel with antique brass finish with genuine leather covered handle.
Display plate: wall-mounted, for vertical display, made of screen-printed woodThis sword is an official item manufactured by United Cutlery under official delal license from New Line Cinema!
UC3383 -
United - Anduril - sword of Aragorn - UC1380 - The Lord of the Rings - fantasy sword
From the fragments of Narsil, kept in Rivendale, "Anduril" is reforged, the sword that will be delivered to Aragorn once he becomes King. The certificate of authenticity is included in the package. On the blade there are engravings in Elvish which translated mean "I am Anduril, who was Narsil, the sword of Elendil, let the slaves of Mordor flee from me!"
Includes a parchment certificate of authenticity.
Total length: 134.3 cm
Blade length: 103.19 cm
Blade thickness: 0.64 cm
Blade material: tempered. 420 J2 stainless steel engraved with runes.
Handle: Solid metal cross and knob with antique silver plated finish and 24 carat gold plated finishes. The pommel is engraved with runes and the handle is wrapped in genuine leather. Rat tail construction.
Plate: wood. screen printed with the symbols of the Kingdom of Gondor.This sword is an official item manufactured by United Cutlery under license from New Line Cinema!
UC1380 -
Hollywood Collectibles Group - Rambo 5 Last Blood - HEARTSTOPPER Standard Edition - knife
Original and official reproduction under movie license of the knife used in the movie Rambo - Last Blood
Intended use: CollectionProduction type: Industrial
Country of Production: China
Blade: Full tang stainless steel 7Cr17MoV
Blade treatment: Dual Tone
Handle: G10
Blade length: 229mm.
Blade thickness: 5.5mm.
Total length: 381mm.
Balance: Advanced
Weight: 800g.
Scabbard: leather
Package: Cardboard box with Rambo Last Blood logos
Notes: Original and official product, with Lionsgate movie licensesRB9415 -
Tanto - Folded Performance Damascus - YNHR13T - Oriental swords
Production: semi-crafted
Blade: sharpened in high carbon AISI 1060 HCS folded steel (damascus)
Hamon: Noted style
Hi: -
Blade length (without habaki): 26cm.
Motohaba: 2.5cm.
Sakihaba: 2cm.
Sori: -
Blade thickness: 6mm.
Kissaki: 4.0cm.
Tsukamaki length: 8.5cm.
Total length: 40cm.
Weight: 326g. without scabbard - 448g. with scabbard
Balance: advanced, at 1cm
Saya: black painted wood
Handle: same black with black cotton tsukagawa
Sageo: black cotton
Fuchi and Kashira: brass
Habaki and Menuki: brass
Seppa: brass
Notes: -Small technical glossary: Hamon: tempering line on the blade * Hi: deep groove in the blade, also called colasangue * Saya: scabbard of the sword * Tsuka: handle * Tsukamaki: weave on the handle * Tsuka-Ito or Tsuka-gawa: webbing of cotton, silk or leather that wraps the handle * Tsuba: guard * Fuchi: ornament between guard and sleeve * Kashira: ornament at the end of the handle * Menuki: medallions placed under the handle's cordage * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which the Sageo is tied * Motohaba: height of the blade at habaki * Sakihaba: height of the blade at kissaki.
YNHR13T -
Tanto - DragonFly - YNHR5T - Same white and black cotton - oriental swords
Production: semi-craftmade
Blade: sharpened steel AISI 1060 high carbon content
Blade length (including habaki): 23,50cm.
Motohaba: 2.55cm.
Sakihaba: 2cm.
Sori: -
Blade thickness: 6mm.
Kissaki: 2.5cm.
Tsukamaki length: 9cm.
Total lenght: 35,3cm.
Weight: 348g. (without scabbard) - 442g. (including scabbard)
Balance: advanced, at 1cm
Saya: black varnished wood
Handle: same white with black cotton tsukagawa
Sageo: black cotton
Fuchi and Kashira: brass
Habaki and Menuki: brass
Seppa: brass
Notes: -Small technical glossary: Hamon: tempering line on the blade * Hi: deep groove in the blade, also called colasangue * Saya: scabbard of the sword * Tsuka: grip * Tsukamaki: weave on the grip * Tsuka-Ito or Tsuka-gawa: webbing of cotton, silk or leather that wraps around the grip * Tsuba: guard * Fuchi: ornament between guard and sleeve * Kashira: ornament at the end of the sleeve * Menuki: medallions placed under the cordage of the sleeve * Habaki: collar that wraps around the beginning of the blade * Seppa: trimmings of the guard * Shitodome: trimmings to which the Sageo is tied * Motohaba: height of the blade at the habaki * Sakihaba: height of the blade at the kissaki.
YNHR5T -
Citadel - Iaito Steel craft - DNH7 - selective hardening - practice sword
These handcrafted iaito stand out for their classic line and for their functional quality, which is well coupled with the traditional manufacturing techniques and the materials used.
The blades are carbon hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered to 60 HRC for excellent cutting, penetration and flexibility. The blade is then hand-polished on stone and the sword is finished in every single detail.Given the high craftsmanship nature of these swords, we would like to clarify that the photo is purely for illustrative purposes as designs of tsuba fuchi and kashira may differ from the one shown here as well as the weights and measures of the sword may differ, albeit slightly. .
Blade: in DNH7 steel with high carbon content with selective clay hardening 60 / 40HRC not sharpened
Hamon: irregular Gunome style
Hi: bo-hi
Blade length: 71.5cm.
Motohaba: 3cm.
Sakihaba: 2.2cm.
Sori1.5cm
Blade thickness: 5.5mm.
Kissaki: 3.5cm.
Tsukamaki length: 25.5cm.
Total length: 102.5cm.
Katana weight: 910g.
Weight with Saya: 1170g.
Balance: advanced, at 12.5cm. from Tsuba
Saya: black lacquered wood and buffalo horn
Tsuka-ito: -
Sageo: -
Tsuba: antiqued metal
Fuchi, Kashira, Menuki, Seppa and Shitodome: bronze
Country of production: Cambodia
Habaki: copper
Note: -
Small technical glossary: Hamon: temper line on the blade * Hi: deep groove in the blade, also called blood-cola * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: weaving in cotton, silk or leather that wraps around the handle * Tsuba: guard * Fuchi: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cord of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which the Sageo is linked * Sori: curvature of the bladeCI5106 -
Marto - Ivanhoe's sword - 539 - historical sword
The sword of Ivanhoe, disinherited and exiled by his father Cedric the Saxon for swearing love to Lady Rowena.
The story narrated takes place in England in the year 1194, at the time of King Richard the Lionheart and the Crusades, in conjunction with the controversies that divide the Saxons and the Normans.
The Knight Wilfred of Ivanhoe, son of the Saxon noble Cedric, loves, in return, the young lady Rowena. Cedric contrasts the love between the two, as he has already politically decided to marry Rowena to Athelstane with the aim of returning after a long time, a Saxon lineage to the throne and tries to remove Ivanhoe, friend of the Norman king Riccardo Cuor of Leone.
The young man thus participates in the crusades, following Riccardo. John the Landless in the absence of his brother illegally appropriates the throne. Upon returning from the Crusades, Ivanhoe participates in a tournament in which he manages to win against all the champions affiliated with the usurper. The defeat weighs on the pride of the Norman nobility who will make him prisoner with his father Cedric, Rowena and Athelstane. King Richard with the help of Locksley (Robin Hood), will be able to free them, so that Ivanhoe will be able to marry Lady Rowena.
In some parts of the novel, the way in which hatred and envy are manifested towards Isaac of York and his daughter Rebecca, this denotes the anti-Semitism already present in the period under consideration, far in advance of what it happened in the last century of the twentieth century. (from Wikipedia)
The sword has a steel blade shelled up to the middle and a brass-plated metal hilt with elso arms decorated with two facing lions.
- 420 cm steel blade 82.5 cm
- total length 101 cm
- excellent finishes
- Blade width 6 cmMT-539 -
Marto - Conan - PREMIUM crafted scabbard for Conan's Father Sword - FF115P
Faithful reproduction of Conan's "Father Sword" sword sheath used by Arnold Schwarzenegger in the movie Conan the Barbarian. PREMIUM VERSION handcrafted using top quality leather. Thanks to the excellent finishes and precise stitching, this scabbard adapts perfectly to the Atlantean sword produced by Marto and Windlass.
Materials: leather and PREMIUM leathers
Production: Spain
Total length: 70 cm
Weight: 286 gr.
- Notes: the product only includes the scabbard, the sword can be purchased separately.FF115P -
Pohl Force - MK-9 Last Blood Heartstopper - Rambo 5 CNC² Edition - knife
With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.
The Pohl Force LAST BLOOD® CNC² Edition MK-9 is a perfectly designed knife in the eye-catching Spear Point style that looks like a modern, tactical tool in the unmistakable Pohl design.
Only strong and high quality materials are used for its manufacturing: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives the 23cm long and 6mm thick blade a high corrosion resistance and an excellent edge retention. The full tang construction is topped with a micarta handle that ends in an aesthetic element that can be used as a striking tool.
The micarta machining gives the handle a distinctive look with three-dimensional millings, and the handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. A subhilt on the underside of the handle provides maximum control in handling the blade giving the MK-9 a distinctive look. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.
The knife comes with a leather sheath of the highest quality and is sold with a 3D Velcro patch and a cloth for care and cleaning.
Intended Use: Collection
Blade: Full tang stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: Micarta
Blade length: 230mm.
Blade thickness: 6mm.
Total lenght: 380mm.
Weight: 658g.
Scabbard: Leather
Packaging: 3D Velcro patch - Cleaning clothPF-5003 -
Pohl Force - MK-8 Last Blood Bowie - Rambo 5 CNC² Edition - knife
With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.
The Pohl Force LAST BLOOD® CNC² Edition MK-8 is a perfectly designed knife in the classic Bowie style that, despite its historical roots, presents itself as a modern, tactical tool in the unmistakable Pohl design.
Only high quality, durable materials are used in its construction: Stainless steel 90Cr18MoV (440C) hardened to 57/58HRC gives the 20cm long, 6mm thick Bowie blade high corrosion resistance and excellent edge retention. The full tang construction culminates in a G-10 handle that finishes with a unique aesthetic element that impresses with its dramatic design.
The black surface with three-dimensional millings on the handle contrasts colourfully with the blade in a two-tone finish. The handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. It is completed by the ever-present knotted paracord camouflage lanyard that distinguishes all Pohl Force productions and corresponds exactly to the same paracord used in the filming of the movie.
The knife comes with a top-quality leather sheath and is sold with a 3D Velcro patch and a cloth for care and cleaning.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: In G-10
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 350mm.
Weight: 538g.
Scabbard: Leather
Packaging: 3D Velcro patch - Cleaning clothPF-5002 -
Pohl Force - MK-9 Last Blood Heartstopper - Rambo 5 CNC² Edition - Kydex Set - knife
With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.
The Pohl Force LAST BLOOD® CNC² Edition MK-9 is a perfectly designed knife in the eye-catching Spear Point style that looks like a modern, tactical tool in the unmistakable Pohl design.
Only strong and high quality materials are used for its manufacturing: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives the 23cm long and 6mm thick blade a high corrosion resistance and an excellent edge retention. The full tang construction is topped with a micarta handle that ends in an aesthetic element that can be used as a striking tool.
The micarta machining gives the handle a distinctive look with three-dimensional millings, and the handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. A subhilt on the underside of the handle provides maximum control in handling the blade giving the MK-9 a distinctive look. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.
The knife comes with a high quality thermoformed Kydex® sheath with belt loop and thigh stopper and is sold with a certificate of manufacture, a 3D Velcro patch, a care and cleaning cloth and a Nylon Zip bag with Pohl Force logos.
Each knife is numbered on both the blade and certificate.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: Micarta
Blade length: 230mm.
Blade thickness: 6mm.
Total lenght: 380mm.
Weight: 658g.
Scabbard: Thermoformed, in Kydex
Package: Warranty certificate with serial number - 3D Velcro patch - Cleaning cloth - Soft Nylon pouch with zipper and Pohl Force logos.PF-5113 -
Pohl Force - MK-8 Last Blood Bowie - Rambo 5 CNC² Edition - Kydex Set - knife
With the Pohl Force MK-8 and MK-9 knives at its side comes the conclusion of the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen.
The Pohl Force LAST BLOOD® CNC² Edition MK-8 is a perfectly designed knife in the classic Bowie style that despite its historical roots presents itself as a modern, tactical tool in the unmistakable Pohl design.
Only high quality and resistant materials are used for its production: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives to the Bowie blade, 20cm long and 6mm thick, a high resistance to corrosion and an excellent edge retention. The full tang construction culminates in a G-10 handle that ends in a unique aesthetic element that impresses with its dramatic design.
The black surface with three-dimensional millings on the handle sits in chromatic contrast to the two-tone finish blade. The handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.
The knife comes with a high quality thermoformed Kydex® sheath with belt loop and thigh stopper and is sold with a certificate of manufacture, a 3D Velcro patch, a care and cleaning cloth and a Nylon Zip bag with Pohl Force logos.
Each knife is numbered on both the blade and certificate.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: In G-10
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 350mm.
Weight: 538g.
Scabbard: Thermoformed, in Kydex
Package: Warranty certificate with serial number - 3D Velcro patch - Cleaning cloth - Soft Nylon pouch with zipper and Pohl Force logos.PF-5112 -
Museum Replicas Windlass - Black sword - 501176 - Handcrafted Sword
"Forged by the dark elves, the sword was wielded by wood elves for hundreds of years until it was given to a man, since then it is called the" Black Sword. "Feared by orcs, dwarves, men and evil beasts, the sword bearer performed many great feats until his death while slaying a great evil dragon. "
The Blacksword fantasy sword features a burnished tempered carbon steel blade.
The guard and knob are made of cast metal, while the handle is made of wood wrapped in black leather. Includes a black leather sheath.
Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 80 cm.
Total length: 108cm.
Blade thickness: 5mm.
Weight: 1596 g.
Note: the blade is not sharp501176 -
Museum Replicas Windlass - Leif Erikson Sword - 501651 - Viking sword
Leif is believed to have been born around 970, second son of Erik the Red (Eiríkr Rauði), a Norwegian, son of Thorvald Asvaldsson, great grandson of Naddoddr, the discoverer of Iceland. His mother was Þjoðhildur. His father had founded two Viking colonies, the Western Settlement and the Eastern Settlement, in Greenland, a land to which he himself had given its name.
High carbon steel blade, robust and well white. The pommel and guard are richly carved and decorated with sea dragons and intertwined knots. The wooden handle is covered in black leather and features three knotted rings. The sword comes with a black leather scabbard with decorations and a leather belt.
Blade: 1065 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 74.5cm.
Blade thickness: 4mm.
Weight with scabbard: 1535g.
Sheath: leather with bronze mounts
Notes: the blade is not sharp501651 -
Sigg - Kids Water Bottle Underwater Pirates 0.4l
Sigg - Kids Water Bottle Underwater Pirates 0.4l Warning: Only for pirates and adventurous boys and girls. The shark pirate is the best companion when hunting for hidden treasure and always provides a refreshing drink before the next bounty. The high-quality, recyclable aluminum drinking bottle is extremely easy to transport and is equally suited to both school and leisure activities. The material is free from harmful chemicals, such as estrogen-mimicking substances and phthalates – for safer drinking enjoyment. The spill-proof child cap also ensures easy transport, even when things get too pirate-like! Measures Height: Ø Weight 19.7 cm 6.6 cm 112 gr.8624.70 -
Hollywood Collectibles Group - Rambo II knife - SECOND CHOICE - knife
Original collectible model "Rambo 2" produced by Hollywood Collectibles Group. This item is new, however it has some marks and scratches on the blade, imperfections which are visible in the photos.
Given this characteristic, we have decided to offer it as a second choice product at a discounted price.
Intended use: Survival/Collection
Blade: 420 stainless steel
Handle: Aluminum and paracord
Blade length: 250mm.
Blade thickness: 5mm.
Handle length: 100mm.
Total length: 385mm.
Balancing: Advanced, 2cm. from the lower guard branch
Weight: 505g.
Closure: -
Clips: -
Sheath: leatherSS-RAMBOII -
Museum Replicas Windlass - Accolade Dagger of the Knights Templar 404335 - craft dagger
This extraordinary medieval dagger is the ideal companion for the Accolade sword.
The carbon steel blade has stamped the seal of the Knights Templar, while the knob has an inlaid cross.
Beautiful leather sheath.
Blade: carbon steel
Handle: brown leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather
Blade length: 260mm.
Handle length: 100mm.
Total length: 420mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 565g.
Weight with sheath: 713g.404335 -
Down Under Knives - The Outback Bowie - USED - knife - L446128
USED KNIFE, TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased and used
* Condition: In good overall condition (see accompanying photos)
* Commercially available
* Sharpening: Resharpened by our workshop, also clean oxidation which has affected some portions of the edge, which is however back in working order
* Marks on blade: YES
* Marks on handle: YES, various superficial oxidation stains
* Box: Present and original, in cardboard
* Scabbard: in good condition
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratoryIntended use: Hunting / Outdoor
Production type: Industrial
Blade production: Taiwan
Blade: Stainless steel 440C differentiated hardening 58/45HRC
Blade Treatment: Mirror polished
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Leather
Packaging: Cardboard box
Notes: Accompanied by a whetstone.The Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee films, in fact it faithfully follows its shape and dimensions.
L446128-U -
Harry Potter - Magic Wands Marauder's Map Wand Collection NN7905
The set includes an exhibitor of the Marauder's Map and four official wands of the magicians who created the map:
Remus Lupine ™, Peter Pettigrew ™, Sirius Black ™ and James Potter ™.
The display measures 39 cm high and 20 cm wide. The sticks measure about 38 cm in length.
It is an officially licensed product Warner Bros Entertainment Inc.
NN7905 -
Museum Replicas Windlass - Sword of Robert the Bruce - 501495 - historical sword
Robert I Bruce was king of Scotland from 1306 to 1329. Of Norman and Scottish Gaelic ancestry, he was one of the greatest kings of Scotland, and also one of the most famous warriors of his era. He led Scotland against the Kingdom of England during the Scottish Independence Wars.
He was the great-grandson of David I of Scotland and was often at odds with the Scottish hero William Wallace.Sword characteristics:
- Total length: 110 cm
- Blade length: 92 cm
- Blade: in High Carbon Steel
- Handle: metal and leather
- Weight: 1.35 kg
- Thickness: 4 mm
- Accessories: sheath and belt in
- Blocking: 13cm from the guard branch501495 -
Citadel - Japanese Aikuchi - Special Salamander - craft knife
aikuchi
processing
The blades are carbon-hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (breed skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 170mm. (including habaki)
Total length: 275mm.
Weight: 210g. without sayaNote: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.
CI-AI-SAL -
Museum Replicas Windlass - Bonny Highland Scottish Dirk 400806 - craft dagger
The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.
The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.
Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -400806 -
Museum Replicas Windlass - Centurion Gladius 501430 - Gladio - historical sword
Faithful reproduction of the Roman sword produced by Windlass
Blade: 1095 carbon steel
Handle: in wood and bronze
Blade length: 50cm.
Total Length: 71cm.
Blade thickness: 1.5mm.
Balancing: advanced
Weight: 765g.
Sheath: in leather, hand-sewn, with bronze finishes
Notes: balanced, perfect for exposition or historical re-enactment501430 -
Museum Replicas Windlass - Brass Two Hand Battle Sword 501010 - battle ready
After many requests, they’re here! We are glad to offer our new line of blunt swords and rapiers developed for the rigors of mock combat. Each blade is built to withstand a lot of use by reenactors or stage performers. Forged of high carbon steel that’s fully tempered. The edges and points are 3/16″ thick and rounded over for better nick resistance. These are crafted just like our regular swords – medieval swords have peened steel and brass parts, and stout wood grips covered with leather; rapiers have very tough, wire wrapped cast grips and threaded tang ends. All come with scabbards. Use at your own risk. Use proper safety precautions at all times. Two Hand Battle Swords-Overall 481/2″. Blade 381/2″ long, 21/8″ wide. Wt: 4 lbs., 4 oz.501010 -
Windlass - Italian Arming Dagger 403599 - craft dagger
Reproduction of an Italian dagger of the 14th / 15th century.
The shaped handle and the fishtail pommel, combined with an elegant guard, give it a regal appearance. The long blade has a central reinforcement rib that allows it to support heavy lunges. Excellent overall balance and handling speed.
Steel blade with high carbon content, through tang. Guard and knob in nickel-plated metal.
Blade: carbon steel - NOT SHARP
Handle: brown leather
Knob: carbon steel
Guard: nickel-plated metal
Sheath: brown leather and steel
Blade length: 338mm.
Handle Length: 165mm.
Total Length: 502mm.
Blade width: 30mm.
Blade thickness: 6.7mm.
Weight: 464g.
Weight with Sheath: 552g.403599 -
Museum Replicas Windlass - Sgian Dubh 400910 Scottish knife - knife collection
The Sgian Dubh is a ceremonial dagger knife (in sgian Gaelic) worn as part of the modern Scottish Highland dress, along with the kilt.
It is worn tucked into socks, with only the knob visible.Intended use: sports / collection
Type of production: artisanal
Country of production: India
Blade: 1055 carbon steel
Blade treatment: -
Handle: in engraved wood with fittings
Blade length: 82mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 46g.
Sheath: in wood and leather
Packaging: -
Note: -400910 -
Museum Replicas Windlass - Medici Renaissance Dagger 403721 - craft dagger
Reproduction of the Italian Renaissance dagger potentially worn on the belt by Lorenzo de 'Medici. Said Lorenzo the Magnificent (Florence, 1 January 1449 - Careggi, 8 April 1492), he was lord of Florence from 1469 to his death, the third of the Medici dynasty. He was also a writer, patron, poet and humanist, as well as one of the most significant politicians of the Renaissance, both for having incarnated the ideal of the humanist prince, and for the very careful management of power.
The cut-free dagger on both sides is made of carbon steel, with precise and accurate workmanship and leather finishes. The hilt and the knob are in steel and the handle is covered in soft black leather. Comes with a leather sheath and steel fittings.
Blade: carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 280mm.
Handle Length: 95mm.
Total Length: 415mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 448g
Weight with Sheath: 542g.403721 -
Valyrian Steel - Needle - Sword of Arya Stark - Il Trono di Spade - Game of Thrones - spada
La Valyrian Steel Collection è una serie di riproduzioni con licenze ufficiali, di armi presenti nell'universo fantasy creato dai libri best-seller di George R.R. Martin. Ogni singolo prodotto è realizzato con i migliori materiali disponibili e con particolare attenzione alle finiture ed ai dettagli.
Needle - La spada di Arya Stark
Lama: non affilata, in acciaio inox 420J2, lunga 57cm.
Guardia e Pomolo: Metallo color ottone antichizzato
Impugnatura: Pelle
Supporto Espositivo: da muro, in legno
Lunghezza Totale: 77.5cm.
Arya Stark
Arya Stark nacque nel duecentottantanovesimo anno dopo la conquista del Continente Occidentale da parte di Aegon Targaryen; è la seconda figlia femmina di Eddard Stark e Catelyn Tully.
È descritta come una bambina magra ed atletica. Ha ereditato la fisicità degli Stark, avendo un viso allungato, gli occhi grigi e i capelli castani. La sua personalità ricorda inoltre quella della defunta zia paterna, Lyanna.VS0114€319.67Out of stock