Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Conaz Consigli Scarperia - Zuava knife 16 cm raw ox horn 50307 - knife
Intended use: sporting/collection
Type of production: artisan
Blade production: Italy
Blade: Stainless steel X50CrMoV15
Blade treatment: -
Handle: Raw ox horn
Blade length: 70mm.
Blade thickness: 1,6mm.
Length closed: 90mm.
Total length: 160mm.
Weight: 53g.
Closure: without blade lock
Packaging: cardboard box
Sheath: -Craftsmanship is beautiful because it is varied
The colours of the materials from which the handicrafts are made may vary from those shown in the pictures.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: that's the beauty of fine materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: that's the beauty of fine workmanship. Combine all this and you have a product that is always different and unique. And always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.
50307 -
Laguiole En Aubrac - raw buffalo horn - knife
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: raw buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 72 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512CBI/FSI1 -
Laguiole En Aubrac - Le Randonneur knife - Boxwood collection knife
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Boxwood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RBI-LSB1 -
Laguiole En Aubrac - Sauveterre knife in buffalo horn - handmade knife
French regional knife handcrafted in the city of Sauveterre
Blade: Swedish 12C27 to 54HRC stainless steel.
Handle: horn
Blade length: 90 mm.
Blade thickness: 3 mm.
Total length: 200 mm.
Weight: 90 g.
Folders: Stainless Steel
Heads: Stainless steel
Closure: Stainless steel retention spring
Clip: Absent
Sheath: AbsentSA509BUI -
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife
This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.
Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs
Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm50075 -
Consigli Scarperia - Maremmano Amaranth wood - Kilama Serie MFMA18 - knife
The series Kilama by Consigli is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
Total length: 185
Blade length: 80
Blade thickness: 2.5
Weight. 55g
Steel: 420
Hanfle: amaranth wood
Sheath: -
Package: box with cleaning kit50154 -
Conaz Consigli Scarperia - Fiorentino Bovino knife cm 24 - 50018 - knife
Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 148g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.R-FIC24 -
Consigli Scarperia - Calabrese in bovine R-CAC20 - knife
A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip50004 -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 17cm - 53161 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 34g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53161 -
Conaz Consigli Scarperia - Pattada Brotzu raw mutton 22cm PBM22G - knife
Pattada Brotzu raw mutton 22cm PBM22G - knife
Typical folding knife craftsmanship Sardinian manufactured by Conaz ScarperiaBlade: stainless steel 420
Handle: raw mutton
Blade length: 90mm.
Overall length: 215mm.
Weight: 64g.WARNING: these are natural material, the color of the horn may be different from the one in the picture.
PBM22G -
Conaz Consigli Scarperia - Buffalo horn screed - Kilama 50159 series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Weight: 63g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case50159 -
Consigli Scarperia - Maremma in Olivo - Series Kilama MFO18 - knife
Maremma in Olivo - Series Kilama MFO18 - knife
The series Kilama Councils is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
that reflect the traditional and regional Italian classics knives.
Total length: 185
Blade length: 80
blade thickness: 2.5
weight. 55g
Steel: 420
manicatura: amaranth wood
Sheath: fabric
Package: Box Advice with cleaning kit knife50157 -
Conaz Consigli Scarperia - Hunchback knife in Olive - Kilama 50153 Series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisanLama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 185mm.
Weight: 50g.
Closing: retention spring
Packaging: Tips box with knife cleaning kit
Sheath: fabric caseGAO18 -
Conaz Consigli Scarperia - Senese knife in amaranth - Kilama series SEAM18 - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: amaranth wood
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 185mm.
Weight: 55g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
SEAM18 -
Conaz Consigli Scarperia - Zuava knife 19 cm raw ox horn 50309 - knife
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ox horn
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 190mm.
Weight: 79g.
Closing: without blade lock
Packaging: cardboard box
Sheath: -
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50309 -
Conaz Consigli Scarperia - Mugello 16 cm horn cattle raw E-CMC16G - knife
Mugello 16 cm horn cattle raw E-CMC16G - knife
Blade: 420 stainless steel
Handle: raw beef
Blade length: 75mm.
Overall length: 165mm.
Weight: 39g.
Closed Length: 90mm.
CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.50306 -
Conaz Consigli Scarperia - Ghiandina 16 cm horn cattle raw E-GHC16G - knife
Ghiandina 16 cm horn cattle raw E-GHC16G - knife
Blade: 420 stainless steel
Handle: raw beef
Blade length: 70mm.
Overall length: 160mm.
Weight: 36g.
Closed Length: 90mm.
CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.50308 -
Laguiole En Aubrac - Capucin carbon and bronze - 8cm - collection knife
Intended use: Sports / collection
Type of production: Industrial
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: satin
Handle: carbon fiber and copper
Blade length: 77mm.
Blade thickness: 2.5mm.
Closed length: 100mm.
Total length: 177mm.
Thick when closed: 20mm.
Balancing: -
Weight: 47g.
Closing: -
Clip: -
Sheath: -
Packaging: -
Note: -L0510CCBI -
Conaz Consigli Scarperia - Anconetano ox horn 20 cm - 50001 - knife
Traditional knife produced by master cutlers in Scarperia, a place where, since 1300, the artisan manufacture of Italian knives has continued.
Fisherman's knife, typical of the Adriatic sea belt. With external spring, handle in full polished bovine horn, on the end of the back it has a deep step at right angle useful for branching nets.
Intended use: CollectionType of production: artisanal
Blade: X50CrMoV15 stainless steel
Production Lama: Italy
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 200mm.
Weight: 58g.
Closing:
Notes: handcrafted in the city of Scarperia (FI)The colors of the materials with which our handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you. A slight surprise is therefore always accompanied by every online purchase of our handcrafted products: but this is also the beauty of craftsmanship.
50001 -
Conaz Consigli Scarperia - Arbus knife - Arburese Bovine Blonde Horn 20cm - 53021 - knife
Characteristic Sardinian knife, typical of the Arbus area, blade with a characteristic bellied shape, very suitable for leather.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 15mm.
Total length: 205mm.
Weight: 73g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53017B -
Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife
Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50002 -
Conaz Consigli Scarperia - Mozzetta light ox horn 50034 - knife
This knife owes its name to the blunt tip which is absolutely missing as if the blade had been cut off.
Pointless knives became much more widespread with the "Giolitti law" of 1908 which fixed the length of the blade of pointed knives at only four centimeters.
For mozzette, the limit rose to ten centimeters, offering the possibility of safely carrying a knife of sufficient size in your pocket without risking the rigors of the law.Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 185mm.
Weight: 63g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseThe craftsmanship is beautiful because it is varied
The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.50034 -
Conaz Consigli Scarperia - Pattada Brotzu knife bovine horn 22cm - 53142 - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by the Scarperia Consigli company.
The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition.
Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 120mm.
Total length: 215mm.
Weight: 62g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53142 -
Conaz Consigli Scarperia - Pattada Brotzu knife ox horn - 53143 - 24cm - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 76g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53143 -
Consigli Scarperia - Romano con anello 30cm - ox horn - 50060 - knife
The "Roman" testifies to the widespread mentality in the Papal States for which the knife was considered as a faithful friend to be constantly worn "in his pocket" and to be unleashed at the first hint of a fight or for an immediate response.
Many elements constituting the "Roman" bear witness to the offensive use that distinguished this knife: the sharp blade, the decorations of the lattice handle or fish bone that served to improve the grip, the locking system with fixed spring that prevented the knife could close up accidentally and that at the time of the opening emitted a dry noise that exalted the aggressive expression.
Destination of use: collection
Type of production: artisan
Blade: 420 stainless steel
Country of production: Italy
Grip: engraved ox horn
Blade length: 130mm.
Blade thickness: 2.5mm.
Length closed: 160mm.
Total length: 290mm.
Weight: 106g.
Closure: rear ring lock
Notes: made entirely by hand in the city of Scarperia (FI)Weight: 140g.
50060 -
Consigli Scarperia - Three Pianelle R-TPC20 - knife
Three Pianelle R-TPC20 - knife
Craft knife regional product in Scarborough in use in southern Italy
The handle in a single block of polished cow horn, carries on pin the characteristic round escutcheon in brass.Blade: Stainless ino 440
Blade length: 8.5 cm
Overall length 20 cm
Weight: 38 gr.
Handle: horn cattle50071 -
Laguiole En Aubrac - Alsacien Ebony - ALS99EBC / NSB1 - knife collection
Destination: French collector's regional knife
Blade: 12C27 Swedish polished stainless steel to 54HRC.
Handle: ebony wood
Blade length: 70 mm.
Blade thickness: 2.5 mm.
Total length: 180 mm.
Weight: 70 g.
Folders: Stainless Steel
Heads: Stainless Steel
Closure: Retention spring
Clip: Absent
Sheath: Absent2481 -
Laguiole En Aubrac - Le Randonneur knife - Ginepro coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Ginepro
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512REI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Oak knife collection
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Oak wood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RHI-FSB1 -
Laguiole En Aubrac - Le Randonneur knife - Olivo coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Olivo
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RLI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Wengè coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Wengè
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RWI-LSB1 -
Laguiole En Aubrac - Texalium - coltello collezione
Coltello chiudibile realizzato artigianalmente dalla Laguiole En Aubrac una delle migliori e più antiche aziende francesi produttrici di coltelli “Laguiole”.
– Acciaio Lama: 12C27 lucidata a specchio
– Manicatura: in Fibra di Carbonio e Texalium
– Lunghezza totale: cm 21,5
– Lunghezza lama: cm 10
– Molla e “mosca” o “ape” (simbolo che contraddistingue un Laguiole visibile sul dorso del coltello) forgiata
– Peso: 89 grammi
3258 -
Laguiole En Aubrac - Ebony and Mammoth Fossil Ivory - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless steel Sandvik 12C27
Country of manufacture: France
Handle: ebony wood with mammoth fossil ivory insert
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L-ENEBAVFM -
Laguiole En Aubrac - Le Camembert - Pistachio Wood - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This knife is dedicated to Camembert and is sold in the round wooden box typical of this famous cheese known throughout the world.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Stainless steel 12C27
Country of production: France
Handle: Pistachio wood
Blade length: 80mm.
Blade thickness: 2.6mm.
Length closed: 110mm.
Total length: 193mm.
Weight: 88g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: wooden boxCB-PIST -
Laguiole En Aubrac - Raw Buffalo Horn with Damascus Steel Blade - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless damasci steel
Country of manufacture: France
Handle: raw buffalo horn
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0512CBI/FDBI1 -
Laguiole En Aubrac - Horn point - spring engraved with Maltese cross - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Maltese cross symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Stainless steel 12C27
Blade production: France
Handle: Blond cow horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -LEA-croce-m -
Laguiole En Aubrac - Horn Point - spring engraved with Pilgrim's Shell - VG10 in Sanmai - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Pilgrim's shell symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
The blade uses 67-layer Japanese VG10 rolled steel, manufactured by Takefu Steel.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Damascus and Japanese VG10 rolled steel
Blade production: France
Handle: Blond Cowhorn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -aubrac-conchiglia -
Laguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife
These high quality knives, are handcrafted in the tradition of French Thiers cutlery.
This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.
The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.
The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly.
The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs.
The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.
Intended Use: Regional/Collection/Outdoor/Hunting
Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0514EBI -
Midgards Messer - Locking Valhalla folding knife - PRIVATE COLLECTION - knife
Knife from a private collection
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, limited edition to 150 pieces
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:
* Sheath:
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratoryIntended use: Collection / Survival
Type of production: industrial
Blade: CPM D2 steel
Country of production: Germany
Handle: in G10
Blade length: 140mm.
Blade thickness: 4.8mm.
Total length: 310mm.
Weight: 520g.
Sheath: -
Notes: patented "knee" closure system made in ItalyAP-MDM015 -
Wander Tactical - Franken Folder - Black Blood Razor & Micarta - Limited Edition - PRIVATE COLLECTION - knife
Intended Use: Collection / Heavy Duty
Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Black Blood
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade.
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: plastic pouch with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each example differs from the previous one in aesthetic finishesWT-FF-BBRM -
Wander Tactical - Franken Folder knife - Mozzetta Micarta - Limited Edition - PRIVATE COLLECTION
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Discontinued, model dating back to 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: WT original packaging
* Sheath: -
* Manuals, Certificates and Warranties: WT certificate
* Checked and certified by our internal laboratoryIntended use: Collection / Heavy Duty
Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Closed length: 124mm.
Total length: 214mm.
Thick when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade
Closing: Rockers Arm 8.11
Clip: in stone washed titanium, removable and reversible
Packaging: Plastic case with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each piece differs from the previous one in aesthetic finishesWT-FF-MO-M -
Wander Tactical - One of a Kind - Mistral TI Folder Desert Micarta - knife
NOTE - "one of a kind" knife, featuring an entirely handcrafted blade with dual finish: Raw and Satin
Intended Use: Heavy Duty / Hiking / Tactical / CollectionType of production: Midtech (handcrafted blade and handle - industrial folders)
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw and Satin
Handle: titanium folders with micarta handle
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Packaging: plastic case with Wander Tactical logos
Notes: "one of a kind" knifeWT-MITIONE-DM -
Laguiole En Aubrac - Mandailles knife - Buffalo horn - knife
A handmade Laguiole en Aubrac knife made by a master craftsman from the region of origin of Laguiole. Extremely precise in its manufacture, it is decorated with the shepherd's cross on the handle. This cross allowed those who left during the long months of the transhumance to say their prayers once the knife was stuck in the bread.
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512BUMIF -
Wander Tactical - Hurricane Folder Gen.IV - DLC Green Micarta - folding knife
Intended use: Heavy Duty / Hiking / Tactical / Collection
Production type: industrial
Country of production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Black DLC
Handle: Titanium folders with micarta grip
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total lenght: 210mm.
Thickness when closed: 13,6mm.
Weight: 164g.
Closure: Rockers Arm 8.11 with additional screw safety pin, removable
Clip: Titanium, removable and reversible
Package: Plastic box with Wander Tactical logos, warranty certificate, safety pin
Notes: 4th generation, production 2021WT-H4-PGM -
Wander Tactical - Franken Folder - Raw & Burnt Green Micarta - Limited Edition - handmade knife
Intended Use: Collection / Heavy Duty
Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folder with micarta handle
Blade length: 95mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total lenght: 214mm.
Thickness when closed: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade.
Closure: Rockers Arm 8.11
Clip: titanium stone washed, removable and reversible
Package: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely hand made, each piece is different from the previous one for aesthetic finishing.WT-FF-RB -
Wander Tactical - Franken Folder - Mozzetta Blade - Limited Edition - handmade knife
Intended Use: Collection / Heavy Duty
Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folder with micarta handle
Blade length: 95mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total lenght: 214mm.
Thickness when closed: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade.
Closure: Rockers Arm 8.11
Clip: titanium stone washed, removable and reversible
Package: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely hand made, each piece is different from the previous one for aesthetic finishing.WT-FF-MO -
Wander Tactical - Hurricane Folder knife Gen. III - Drop Black PVD - folding knife
Intended use: Heavy Duty / Hiking / Tactical / Collection
Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Black
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 productionWT-HU-F -
Wander Tactical - Hurricane Folder knife Gen.III - Lagunari - Black PVD - Limited Edition
Limited and exclusive edition for the civilian market of the Hurricane Folder model made in only 10 numbered pieces and with the Logo of the amphibious fight instructors of the Lagunari (to whom it was supplied directly by the Wander Tactical). The model also features a partially serrated blade and DLC surface treatment.
Intended use: Heavy Duty / Hiking / Tactical / Collection
Type of production: industrial
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade treatment: DLC Black
Handle: titanium briefcases with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing time: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic packaging with Wander Tactical and Lagunari logos
Notes: Limited Edition with logo of the amphibious fight instructors of the Lagunari and number III generation production 2019WT-HURR-LE -
Laguiole - En Aubrac - Trappeur Olive knife - knife
Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.
Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:LEA-T-W -
Wander Tactical - Hurricane Black Folder knife III Generation - Black Aluminum - folding knife
Intended use: Heavy Duty / Hiking / Tactical / Collection
Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Black
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 productionWT-H3-PVD -
Wander Tactical - Hurricane Folder knife III Generation - Black Aluminum - folding knife
Intended use: Heavy Duty / Hiking / Tactical / Collection
Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Stonwash
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 productionWT-H3-SW -
Wander Tactical - Mistral Folder knife III Generation - Black Aluminum - folding knife
Intended use: Heavy Duty / Hiking / Tactical / Collection
Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Stonwash
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 productionWT-M3-SW -
Laguiole En Aubrac - Camel bone with Japanese SanMai blade - knife
Intended use: Regional / Collection
Type of production: handmade
Blade: Japanese "sanmai" laminated steel with external damask cheeks and VG10 to 61HRC cutting edge
Country of production: France
Handle: Camel bone
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Weight: 104g.
Closure: back retention spring
Clip: absent
Sheath: absentL0512O1H -
Wander Tactical - Hurricane Folder Black Blood custom - Satin Aluminum - folding knife
Custom version of the standard Hurricane model - blade, folders, clips and screws modified by hand by the Wander Tactical knife designer Dino Picco
Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Black Blood
Handle: Aluminum available in alluminium
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 238g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pinWT-HU-BB -
Wander Tactical - Hurricane Lava Flow Custom - Bronze Finish and G10 Jade - folding knife
Single piece custom version of the standard Hurricane model - blade, folders, clips and screws modified by hand by the Wander Tactical knife designer Dino Picco - The finish of the "Bronze" blade is obtained through a natural oxidation process that takes place at the end of the hardening phase cryogenic.
Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Bronze flow
Manicure: Aluminum (alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 187g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pinWT-HU-C -
Wander Tactical - Mini Mistral TI Folder - Black Micarta - folding knife
Intended use: Heavy Duty / Hiking / Tactical / Collection
Type of production: artisan blade and handle - industrial folders
Country of production: Italy
Blade: 59 / 61HRC D2 steel with cryogenic quenching
Blade treatment: Black Blood
Handle: titanium folders with micarta handle
Blade length: 70mm.
Blade thickness: 5mm.
Length closed: 105mm.
Total length: 179mm.
Thickness when closed: -mm.
Balancing: -
Weight: 140g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: -
Sheath: -
Package: -
Note: -WT-MI-MB -
Wander Tactical - Mini Hurricane TI Folder - Black Micarta - folding knife
Intended use: Heavy Duty / Hiking / Tactical / Collection
Type of production: artisan blade and handle - industrial folders
Country of production: Italy
Blade: 59 / 61HRC D2 steel with cryogenic quenching
Blade treatment: Raw
Handle: titanium folders with micarta handle
Blade length: 70mm.
Blade thickness: 5mm.
Length closed: 105mm.
Total length: 179mm.
Thickness when closed: -mm.
Balancing: -
Weight: 140g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: -
Sheath: -
Package: -
Note: -WT-MI-HU-B -
Laguiole En Aubrac - Lo Fau in boxwood - regional knife
Intended use: Collection / Sports
Type of production: artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Boxwood
Blade length: 82mm.
Blade thickness: 2.4mm.
Length closed: 111mm.
Total length: 193mm.
Weight: 53g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruiningLFU99WAI -
Laguiole En Aubrac - Laguiole bovine horn tip 12cm - collection knife
Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.
The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".
The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.
The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.
Intended use: Collection / SportsType of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Mirror polished
Handle: Tip of bovine horn
Blade length: 112mm.
Blade thickness: 3mm.
Length closed: 143mm.
Total length: 255mm.
Weight: 80g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruiningL0514BUI-FSI1 -
Laguiole En Aubrac - Fidelis Ebène - regional knife
The "Fidelis" was born from the desire to pay homage to the "medieval Larzac", with its old Templar villages and legends.
It is a knife that symbolizes the roughness of this land, the rusticity of its vegetation and its climate, but also the nobility of women and men who have worked, modeled, guarded and inserted into this object a soul.
Made in Millau, in the heart of Aveyron, in the cutlery workshops "L'ame du Causse", it is worked with noble materials, such as the precious wood of ebony that the Knights Templars have brought back to their return. Its "sage leaf" blade, made of 12C27 steel, renowned for its cutting quality and ease of maintenance, will be a guarantee of longevity. The "Fidelis" will be your ideal companion to share moments of everyday life full of history.Intended use: Regional
Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade treatment: Satin
Handle: Ebony wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Opening: manual, two-handed
Closure: upper safety ring
Packaging: cardboard case
Note: -2996F -
Laguiole - En Aubrac - Trappeur Olive knife - knife
Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.
Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:L0514TOLI -
Coin knife - Meiji Dragon Yen 1870-1914 - multipurpose with blade, scissor and file
Japanese multipurpose made of blade, scissor and file, inserted inside two coins that faithfully reproduce the Japanese Yen coined during the Meiji period 1870-1914.
Features:
coin diameter: 38mm.
weight: 30 gr.
blade length: 2cm
thickness: 5.5 mm
blade material: 420J2 steel
History of the coin:
The introduction of the yen occurred in 1872 by the Meiji government and replaced by an excessively complex monetary system of the Edo period.Initially, the yen was minted in gold, until 1888 and then moved to silver, until 1914BDYB37 -
Wander Tactical - Hurricane TI Folder - Desert Micarta - custom knife
Intended use: Heavy Duty / Hiking / Tactical / Collection
Type of production: artisan blade and handle - industrial folders
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Raw
Handle: titanium folders with micarta handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 214mm.
Thick when closed: -mm.
Balancing: -
Weight: 182g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: Custom Edition unique pieceWT-HUR-DE -
Wander Tactical - Mistral TI Folder - Black Micarta - folding knife
Article on reservation - available from December 15, 2017
Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logosWT-MTI-BL -
Wander Tactical - Hurricane TI Folder - Desert Micarta - folding knife
Article on reservation - available from December 15, 2017
Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logosWT-HTIF-DE -
Wander Tactical - Hurricane TI Folder - Black Micarta - folding knife
Article on reservation - available from December 15, 2017
Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 109mm.
Blade thickness: 5mm.
Closed length: 145mm.
Total length: 250mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logosWT-HTIF-BL -
Wander Tactical - Hurricane Custom Gate - Raw Finish and G10 Jade - folding knife
Unique piece custom version of the standard Hurricane model - blade, folders, clips and hardware modified by hand by the Wander Tactical knife designer Dino Picco
Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Black Blood
Manicure: Aluminum (alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 187g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pinWT-HUR-GBB -
Wander Tactical - Hurricane Folder - Black - folding knife
First folder presented by Wander Tactical
Type of production: semi-industrial
Country of production: Italy
Blade: D2 Steel 59 / 60HRC
Blade treatment: Black MIL-C 13924
Handle: aluminum
Blade length: 90mm.
Blade thickness: 5mm.
Overall length: 215mm.
Balancing: backward
Weight: 187g.
Sheath: -
Packaging: -
Notes: clip - blade lock Arm Rockers 8:11 - safety pinWT-HURF-BL -
Wander Tactical - Hurricane Aluminum Folder - folding knife
First folder presented by Wander Tactical
Type of production: semi-industrial
Production Lama: Italy
Blade: D2 Steel 59 / 60HRC
Blade treatment: Black MIL-C 13924
Handle: aluminum available in three colors (black, green, alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Overall length: 215mm.
Balancing: backward
Weight: 187g.
Sheath: -
Packaging: -
Notes: clip - blade lock Arm Rockers 8:11 - safety pinWT-HURF-SA -
Laguiole en Aubrac - Carbon fiber with SanMai blade - knife
Intended Use: Regional / Collection
Type of production: Hand
Blade: sanmai steel with sharp VG10 burnished and damask cheeks to 32 layers
Production Country: France
Handle: Carbon fiber with aluminum liners
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Weight: 70g.
Closure: retaining spring
Clip: absent
Sheath: absent
Notes: -au-carbon -
Wander Tactical - Hurricane Folder - OD Green - folding knife
First folder presented by Wander Tactical
Type of production: semi-industrial
Country of production: Italy
Blade: D2 Steel 59 / 60HRC
Blade treatment: Black MIL-C 13924
Handle: aluminum
Blade length: 90mm.
Blade thickness: 5mm.
Overall length: 215mm.
Balancing: backward
Weight: 187g.
Sheath: -
Packaging: -
Notes: clip - blade lock Arm Rockers 8:11 - safety pinWT-HURF-OD -
Laguiole en Aubrac - Ash Wood with blade sanmai - knife
Intended Use: Regional / Collection
Type of production: Hand
Blade: laminated damask steel and VG10 Japanese
Production Country: France
Handle: wood ash
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Weight: 104g.
Closure: retaining spring
Clip: absent
Sheath: absent
Notes: -12646