Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
CRKT - P.S.D. II (Particle. Separation. Device.) by Hammond - AUS-10 & Brown G10 - 7910 - knife
Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC7910 -
CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife
Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.
Intended Use: Tactical
Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC2606 -
CRKT - Pilar Large - Blackwashed Frame Lock Flipper by Vox - 5315KS - folding knife
Intended use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Blackwashed
Handle: Blackwashed stainless steel
Blade length: 67.8mm.
Blade thickness: 3.8mm.
Length closed: 101.5mm.
Total length: 170mm.
Weight: 119g.
Closure: Frame Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315KS -
CRKT - Overland Compact Knife by T. J. Schwarz - 6277 - knife
The compact folding knife ready to tackle any terrain.
It may be small, but just like the upgraded 4x4 vehicles that inspired its name, the Overland Compact is exaggeratedly built and ready to tackle the toughest conditions. It takes the design cues and materials of the full-size Overland and puts them into an ultraportable format that practically disappears into a pocket. When it's time to stop the convoy and set up camp, this knife can prepare light food and chop up the perfect marshmallow stick.
Intended Use: Sporty
Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade Length: 57mm.
Blade thickness: 3.2mm.
Length closed: 81mm.
Total length: 137mm.
Weight: 88g.
Closure: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by T. J. SchwarzC6277 -
CRKT - Squid Compact by Lucas Burnley - 2485K - knife
This small knife is a big deal. The Squid is known as the perfect knife for everyday use, expertly combining simplicity, usability and performance.
Neither brash nor flashy, it is the humble handyman of the knife world: reliable, solid and extraordinarily capable. Now, renowned designer Lucas Burnley has reworked it into a smaller, nimbler version, the Squid Compact. This reasonably priced folding knife is for everyone.
* Assisted opening: The assisted flipper allows rapid blade opening.
* Smooth opening: The IKBS™ ball bearing system ensures maximum smoothness.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily
* Maximum control: Grooves on the back of the blade to ensure a secure and comfortable grip
* Maximum durability: Stainless steel handle withstands heavy use.
* Low profile: Pocket clip ensures safe carrying
* Accessory options: Hole for lanyard or key ring
Intended Use: EDC
Production type: Industrial
Country of manufacture: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: BlackWashed
Handle: BlackWashed stainless steel
Blade Length: 44mm.
Blade thickness: 2.6mm.
Length closed: 74mm.
Total length: 118mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS opening system on pinball-type bearings, spring preload assistedC2485K -
CRKT - Tuna Compact by Lucas Burnley - 2522 - knife
The little fish that rules every pond. Though small, the Tuna Compact evokes the power of one of the world's largest and fastest fish.
It takes the subtle elegance of designer Lucas Burnley's original Tuna and shrinks it into an ultra-compact folding knife. With a profile that suggests strong forward momentum and a blade shape that resembles a deep-sea carnivore, this everyday knife slices through packs and boxes faster than a bluefin tuna slices through waves on a taut line.
* Smooth opening: IKBS™ ball-bearing motion allows for a smooth blade opening.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily.
* Easy opening: The thumb engagement pin allows for quick one-handed opening.
* Exceptional grip: G10 handle provides exceptional grip in all conditions
* Brute force: Fame Lock system uses a thick locking bar to hold the blade in place
* Low profile: Pocket clip ensures safe and secure carrying away from prying eyes
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: StoneWashed
Handle: G10 and BlackWashed stainless steel
Blade Length: 69mm.
Blade thickness: 3.6mm.
Length closed: 97mm.
Total length: 163mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS ball bearing opening systemC2522 -
CRKT - CEO MicroFlipper Sheepfoot by Rogers - 7083 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 56mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 140mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7083 -
CRKT - CEO MicroFlipper Drop Point by Rogers - 7081 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 60mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 143mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7081 -
ESEE Knives - Model 4HM Modified Handle - Leather Sheath - Knife
Intended Use: Bushcraft / Utility
Production Type: Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Black Traction Coating
Handle: Micarta
Blade Length: 115mm.
Blade thickness: 4.8mm.
Total length: 225mm.
Weight: 219g.
Sheath: leather, belt, for vertical carry; Made in the USA
Packaging: cardboard box with ESEE logos.
Notes: modified handle version of Model 4, more suitable for precision work and bushcraft usesESEE-4HM -
CRKT - Clever Girl Kukri Knife - 2710 - Machete
Intended Use: Hiking / Heavy Duty
Production Type: industrial
Blade: Full Tang in carbon steel SK-5 with Black Powder treatment
Country of Production: Taiwan
Handle: G-10
Blade Length: 196mm.
Blade thickness: 4.8mm.
Total length: 336mm.
Balance: Advanced
Weight: 402g.
Sheath: thermoplastic
Packaging: cardboard box with CRKT logos
Notes: Design by Austin McGlaunCR2710 -
CRKT - Folts Minimalist Drop Point Black - 2384K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 2.6mm.
Total length: 133mm.
Weight: 49g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2384K -
CRKT - Carson M16-13DSFG Tan Special Forces - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemM16-13DSFG-CP -
Laguiole En Aubrac - raw buffalo horn - knife
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: raw buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 72 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512CBI/FSI1 -
Laguiole En Aubrac - Le Randonneur knife - Boxwood collection knife
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Boxwood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RBI-LSB1 -
Laguiole en Aubrac - Sommelier sabre Lisse Origine Concorde - Sabrage
Laguiole en Aubrac - Sommelier sabre Lisse Origine Concorde - Sabrage
Sabrage is a special technique for opening champagne bottles with a sabre (sabre in French), usually used as a ceremonial gesture. The sabre is slid along the body of the bottle towards the neck with a sharp blow. The force of the blade striking the lip of the neck is sufficient to break the glass and separate the neck cleanly from the bottle collar which, together with the cork, is shot away by the force of the gas contained in the wine. When applied correctly, the technique is effective with any sparkling wine.
This practice became popular in Napoleonic France when the army visited the aristocratic domains belonging to the empire. The period was just after the French Revolution and the sabre was the weapon of choice for the army's light cavalry, the hussars. Given the numerous victories achieved by the army, there were many celebrations, during which it was customary to open the bottles by a convenient and easily available means. It seems that during one of these celebrations Napoleon himself said 'Champagne! In victory it is a merit; in defeat a necessity', thus encouraging its use and practice.
Champagne sabre entirely handmade in the town of Laguiole.
Authentic champagne sabre of premium Laguiole en Aubrac quality.
Unique piece of Sanvik 12C27 stainless steel, a martensitic stainless steel.
The composition of carbon and chromium offers a unique combination of properties including: very high hardness, very high wear and corrosion resistance.
White resin handle.
Each piece is a unique work of art, handmade by a craftsman.
Delivered in a gift box, manufactured in Aubrac, France
Blade: Stainless steel 12C27 mirror polished - unsharpened
Handle: WHITE RESIN
Blade length: 265mm
Total length: 405mm
Weight: 298g
Packaging: Wooden box with Laguiole en Aubrac logos.
C1S99OC -
CRKT - Techliner Super Shorty - TPENBOND2 - tactical pen
The Techliner™ Super Shorty pen is built to impress with a sleek, ergonomic body and magnetic ends that attach securely to whiteboards, desk legs and workbenches so it's always within reach.
Secure cap: Magnetic ends secure the cap and attach to surfaces
Strong and lightweight: Aluminum handle combines strength with minimal weight
Visually appealing: Blue anodized body
Compact size: Easy to carry
Write anywhere: Ink cartridge developed for extreme environmental conditionsMaterial: 6061 anodized aluminum with stainless steel clip
Rear base: Magnetic
Ink: Black with pressurized Schmidt Refill
Total length: 105mm.
Diameter: 11.7mm.
Weight: 19.8gTPENBOND2 -
CRKT - Freya by Elmer Roush - 2749 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 88mm.
Blade thickness: 32mm.
Total length: 483mm.
Weight: 870g.
Scabbard: -
Notes: Design by Elmer RoushCR2749 -
CRKT - Berserker by RMJ Tactical - 2736 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 118mm.
Blade thickness: 40mm.
Total length: 483mm.
Weight: 940g.
Scabbard: -
Notes: Design by by Ryan Johnson of RMJ TacticalCR2736 -
CRKT - Compano Carabiner by Bond - 9082 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15Mov
Blade finishing: Satin finish
Handle: 2Cr13 stainless steel with blackwash and bronze finish
Blade length: 37mm.
Blade thickness: 3.6mm.
Length closed: 82mm.
Total length: 117mm.
Weight: 62g.
Closure: Slipjoint
Clip: -
Package: Cardboard box with CRKT logos
Notes: Design by Mike Bond - Snap hook for attachment - Bottle openerCR9082 -
CRKT - Folts Minimalist Cleaver Blackout - 2383K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 54mm.
Blade thickness: 2.6mm.
Total length: 129mm.
Weight: 48g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2383K -
CRKT - Pilar III by Vox - 5317 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: G10 and stainless steel with aluminum spacer
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 108mm.
Total length: 182mm.
Weight: 102g.
Closure: FrameLock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5317 -
CRKT - Carson M16-03BK - Bronze & Black Oxide - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 12C27 Sandvik
Blade treatment: Black Oxide
Handle: Stainless steel 2CR13 with nitriding in Bronze
Blade Length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 108g.
Opening: Carson Flipper system
Closure: Frame Lock
Clip: Multi-position, removable, in Black Oxide stainless steel
Package: Cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemCM16-03BK -
CRKT - CEO Bamboo by Rogers - 7096YGK - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096YGK -
Laguiole en Aubrac - Set with acacia cutting board with cheese cutting thread and classical cheese knife
Laguiole en Aubrac - Set with acacia cutting board with cheese cutting thread and classical cheese knife
LAGUIOLE EN AUBRAC is one of the five blacksmiths that still forge knives around the village of Laguiole in southern France according to a centuries-old tradition and turn them into real gems of craftsmanship. Each piece is unique and from wood to mammoth ivory there is hardly any limit to the exclusivity of the materials. Laguiole en Aubrac - acacia board with cheese cutting wire and cheese knife A set of the extra class for every cheese connoisseur and lover of a well-tended cheese platter.
The simple rectangular acacia wood board has a groove and a cutting wire with a stainless steel bracket.
The set also includes the cheese knife with a classic shape, ornament and bee. High-gloss polished stainless steel jaws. This cheese knife is also available in buffalo horn and different types of wood. Suitable for all Laguiole en Aubrac cutlery. The set is delivered in a elegant paper box.
Manufacturer: Laguiole en Aubrac
Handcrafted French Classical cheese knife - 24.5 cm
Blade 12,5 cm
12C27 stainless steel Corn handle.
SETFRGM -
Laguiole En Aubrac - Sauveterre knife in buffalo horn - handmade knife
French regional knife handcrafted in the city of Sauveterre
Blade: Swedish 12C27 to 54HRC stainless steel.
Handle: horn
Blade length: 90 mm.
Blade thickness: 3 mm.
Total length: 200 mm.
Weight: 90 g.
Folders: Stainless Steel
Heads: Stainless steel
Closure: Stainless steel retention spring
Clip: Absent
Sheath: AbsentSA509BUI -
Laguiole En Aubrac - Oyster Opener Knife with mussel shell handle - Gift box
Laguiole En Aubrac - Oyster Opener Knife with mussel shell handle - Gift box
Ref.C2I99CQMIH - Oyster knife with mussel shell handle Presitigioso Open Oysters Laguiole En Aublrac.
Handcrafted realization
Blade: 12C27
Stainless Steel Handle: in shell of mussels.
Blade length: 60 mm.
Blade thickness: 3 mm. T
otal length: 180 mm.
Packaged in an elegant wooden box.
8169C -
CRKT - Tuna Knife by Burnley - 2520 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr14Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 114mm.
Total length: 195mm.
Weight: 105g.
Closing: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas BurnleyC2520 -
CRKT - Piet by Vox - 5390 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass with anodized titanium spacer
Blade length: 68mm.
Blade thickness: 3.3mm.
Length closed: 95mm.
Total length: 164mm.
Weight: 71g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5390 -
ESEE Knives - Esee 3P Desert MB-DE knife - knife
Intended use: Sports
Type of production: Industrial
Blade production: USA
Blade: 1095 carbon steel
Blade treatment: Textured powder coat
Handle: Desert Canvas Micarta
Blade length: 97mm.
Blade thickness: 3mm.
Length closed: -
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 148g.
Closing: -
Clip: -
Sheath: ABS and Nylon with additional clip for wearing on the belt
Packaging: Transparent plastic bag
Notes: Malice ClipsES-MB-DE -
CRKT - Pilar Large by Vox - 5315G - folding knife
Destination of use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin
Handle: Stainless Steel
Blade length: 67mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 170mm.
Weight: 98g.
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315G -
Laguiole En Aubrac - Olive Wood Stainless Steel Wine and Cheese Set in box 3 Pieces
Laquiole En Aubrac Waiters Corkscrew Wine Opener Forged stainless steel blades Olive wood handles, finished by hand Unique Laguiole is pronounced "Laiole" is a village in France renewed for its artisanal hand finished cutlery. Inspired by this region of the world , this set has preserved the craftsmanship in its manufacturing process. The metal is forged then finished and assembled by hand. The Ulive Wood access add the finishing touch to this big-quality laguiole product. Laguiole Set of Wine and Cheese Set Stainless steel blades Smooth easy grip wood handles Unique wood veneer Stone Finished steel blade and Ulive wood hadles Built to last with with quality materials. Olive wood is exceptional quality Veneer handle is implanted with phenolic thermosetting resins which creates a durable dimension stable handle Moisture resistant finishes last a lifetime The color in the Olive wood and grain structure creates unique to each piece Wooden presentation box 2 knives lenght 24cm cheese/ 18cm butter1253SET -
CRKT - Hi Jinx Z by Ken Onion - K281KXP - PRIVATE COLLECTION - Pocket Knife
KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: like new
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on the blade: None
* Marks on the handle: None
* Box: Present
* Scabbard: /
* Manuals, certificates and warranties: Available
* Tested and certified by our in-house laboratory.Intended Use: Sporting
Production Type: Industrial
Country of manufacture: China
Blade: Stainless steel 1.4116
Blade finish: Satin surface
Handle: GFN nylon
Blade length: 84 mm.
Blade thickness: 2.3 mm.
Length closed: 120 mm.
Total length: 203 mm.
Weight: 139 g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard box with CRKT logo
Notes: Ball bearing opening with IKBS system - Opening via Carson pinball system - Design by Ken OnionCK281KXP -
CRKT - Pilar by Vox - 5311 - folding knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 61mm.
Blade thickness: 3.5mm.
Closed Length: 90mm.
Overall length: 151mm.
Weight: 119g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5311 -
Laguiole en Aubrac - Set of 3 grey glitter resin Cheese Knives
Laguiole GREY GLITTER RESIN Cheese Knives - Laguiole En Aubrac, Set of 3 These heirloom-quality knives, designed to last a lifetime and crafted by French artisans with the highest-quality materials, make a truly special gift for wedding or corporate events, finely crafted knives. An exquisite gift or elegant complement to your wine & cheese fete. Each set includes 3 knives packaged in a wooden storage box. The blades are forged from ultrastrong Sandvik steel. The handles are handcrafted from ;grey glitter resin Made in France's Laguiole region. Includes a certificate of authenticity and a lifetime warranty. Set includes 3 pieces: plane, knife and soft cheese spreader. Size (inches): 1 1/2w x 9h (plane), 1w x 9 1/4h (knife), 1w x 7 1/4h (soft spreader) Genuine Laguiole en Aubrac grey glitter resin cheese knives are hand-made in France by master craftsmen and guaranteed for life.5551CORIAN -
CRKT - Ken Onion Hootenanny - K300KXP - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Lama: Satin
Handle: Stainless steel 2Cr13 and grips FRN
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 116mm.
Overall length: 201mm.
Thick when closed: -
Balancing: -
Weight: 136g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Ken Onion, opening system with ball bearing type IKBS opening type Carson FlipperCK300KXP -
CRKT - Burnley Squid - 2490 - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Handle: Stainless Steel 2Cr13
Blade length: 54mm.
Blade thickness: 3mm.
Closed Length: 55mm.
Overall length: 114mm.
Thick when closed: 14mm.
Balancing: -
Weight: 96g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Lucas BurnleyC2490 -
CRKT - Carson M16-12ZLEK Law Enforcement Zytel Folding Tanto - knife
Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breakerCM16-12ZLEK -
ESEE Knives - Avispa - Coyote Brown - BRK1301CB - knife
Intended use: EDC / Sports
Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Treatment Lama: -
Handle: Stainless steel and FRN
Blade length: 89mm.
Blade thickness: 2.8mm.
Closed Length: 127mm.
Overall length: 216mm.
Thick when closed: 9mm.
Balancing: -
Weight: 126g.
Closure: Frame Lock
Clip: Stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with logos Randall's Adventure & Training
Notes: Design by Jeff Randall & Mike Perrin12068 -
ESEE Knives - Avispa - Desert - BRK1301DT - knife
Intended use: EDC / Sports
Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Treatment Lama: -
Handle: Stainless steel and FRN
Blade length: 89mm.
Blade thickness: 2.8mm.
Closed Length: 127mm.
Overall length: 216mm.
Thick when closed: 9mm.
Balancing: -
Weight: 126g.
Closure: Frame Lock
Clip: Stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with logos Randall's Adventure & Training
Notes: Design by Jeff Randall & Mike Perrin12067 -
ESEE Knives - Avispa Black Coated - Black - BRK1301B - knife
Intended use: EDC / Sports
Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Treatment Blade: Teflon coating
Handle: Stainless steel and FRN
Blade length: 89mm.
Blade thickness: 2.8mm.
Closed Length: 127mm.
Overall length: 216mm.
Thick when closed: 9mm.
Balancing: -
Weight: 126g.
Closure: Frame Lock
Clip: Stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with logos Randall's Adventure & Training
Notes: Design by Jeff Randall & Mike Perrin12066 -
ESEE Knives - Zancudo - Desert - BRKR1DT - knife
Intended use: EDC / Sports
Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Treatment Lama: -
Handle: Stainless steel and FRN
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed Length: 101mm.
Overall length: 176mm.
Thick when closed: 8mm.
Balancing: -
Weight: 86g.
Closure: Frame Lock
Clip: Stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with logos Randall's Adventure & Training
Notes: Design by Jeff Randall & Mike Perrin12040 -
ESEE Knives - Zancudo - OD Green - BRKR1OD - knife
Intended use: EDC / Sports
Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Treatment Lama: -
Handle: Stainless steel and FRN
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed Length: 101mm.
Overall length: 176mm.
Thick when closed: 8mm.
Balancing: -
Weight: 86g.
Closure: Frame Lock
Clip: Stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with logos Randall's Adventure & Training
Notes: Design by Jeff Randall & Mike Perrin12039 -
CRKT - Chanceinhell by Ken Onion - K910KKP - Machete
Destinazione d'uso: Escursionismo/Heavy Duty
Tipo di Produzione: industriale
Lama: in acciaio al carbonio 65Mn a 54/56 HRC con trattamento Black Powder
Produzione Lama Cina
Manicatura: Polimeri TPR e Nylon
Lunghezza lama: 304mm.
Spessore della lama: 2.5mm.
Lunghezza totale: 450mm.
Bilanciatura: avanzata
Peso: 490g.
Chiusura: -
Clip: -
Fodero: in Nylon
Confezione: scatola di cartone con loghi CRKT
Note: Design by Ken OnionCK910KKP -
Laguiole En Aubrac - Capucin carbon and bronze - 8cm - collection knife
Intended use: Sports / collection
Type of production: Industrial
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: satin
Handle: carbon fiber and copper
Blade length: 77mm.
Blade thickness: 2.5mm.
Closed length: 100mm.
Total length: 177mm.
Thick when closed: 20mm.
Balancing: -
Weight: 47g.
Closing: -
Clip: -
Sheath: -
Packaging: -
Note: -L0510CCBI -
CRKT - M16-04Z by Kit Carson - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 94mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Total length: 230mm.
Thick when closed: 17mm.
Balance: -
Weight: 182g.
Lock: Liner Lock locking system with self-LAWKS
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: -CM16-04Z -
CRKT - Carson M16-14SFG - Special Forces Big Dog G10 knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr14MoV to 58-60 HRC
Blade treatment: Ti-Ni
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 17mm.
Balancing: -
Weight: 180g.
Closure: Liner Lock with auto-LAWKS locking system
Clip: stainless steel
Sheath: -
Packaging: cardboard box with CRKT logos
Note: -CM16-14SFG -
CRKT - Folts Minimalist Bowie - 2387 - Coltello
Destinazione d'uso: Neck Knife
Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 5Cr15MoV 55/57HRC
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 54mm.
Spessore lama: 2.7mm.
Lunghezza chiuso: -
Lunghezza totale: 130mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 45g.
Chiusura: -
Clip: -
Fodero: Nylon
Confezione: Scatola di cartone con loghi CRKT
Note: Design dy Alan FoltsC2387 -
CRKT - Ripple Black Liner Lock by Ken Onion - K415KXP - Coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Paese di produzione: China
Lama: In acciaio inox 8Cr14MoV
Finitura lama: Satinatura
Manicatura: Alluminio Aeronautico
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 185mm.
Spessore da chiuso: 8mm.
Peso: 66g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Confezione: scatola in cartone con loghi CRKT
Note: Versione First Production Run - Sistema di apertura IKBS (Ikoma Korth Bearing System) su cuscinetti a sfera - Design by Ken Onion3803 -
Laguiole en Aubrac - 3-piece cheese set - guim blanc
Laguiole en Aubrac 3-piece cheese set - guim blanc
The knives by Laguiole en Aubrac combine the long tradition of knife makers in perfect symbiosis with a penchant for perfection, while the price, though, can be measured in worldly standards.
As is for all genuine French Laguiole knives, the traditional shepherds cross in the RESIN GUIM handle, the hand-made engravings on the spine and the bee are a must, including for this cheese set.
It is carefully manufactured by hand and reflects the French tradition and dining culture. Please hand wash (only).
5551 -
Laguiole En Aubrac - Alsacien Ebony - ALS99EBC / NSB1 - knife collection
Destination: French collector's regional knife
Blade: 12C27 Swedish polished stainless steel to 54HRC.
Handle: ebony wood
Blade length: 70 mm.
Blade thickness: 2.5 mm.
Total length: 180 mm.
Weight: 70 g.
Folders: Stainless Steel
Heads: Stainless Steel
Closure: Retention spring
Clip: Absent
Sheath: Absent2481 -
Laguiole En Aubrac - Le Randonneur knife - Ginepro coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Ginepro
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512REI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Oak knife collection
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Oak wood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RHI-FSB1 -
Laguiole En Aubrac - Le Randonneur knife - Olivo coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Olivo
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RLI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Wengè coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Wengè
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RWI-LSB1 -
Laguiole En Aubrac - Texalium - coltello collezione
Coltello chiudibile realizzato artigianalmente dalla Laguiole En Aubrac una delle migliori e più antiche aziende francesi produttrici di coltelli “Laguiole”.
– Acciaio Lama: 12C27 lucidata a specchio
– Manicatura: in Fibra di Carbonio e Texalium
– Lunghezza totale: cm 21,5
– Lunghezza lama: cm 10
– Molla e “mosca” o “ape” (simbolo che contraddistingue un Laguiole visibile sul dorso del coltello) forgiata
– Peso: 89 grammi
3258 -
Laguiole En Aubrac - Ebony and Mammoth Fossil Ivory - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless steel Sandvik 12C27
Country of manufacture: France
Handle: ebony wood with mammoth fossil ivory insert
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L-ENEBAVFM -
Laguiole En Aubrac - Le Camembert - Pistachio Wood - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This knife is dedicated to Camembert and is sold in the round wooden box typical of this famous cheese known throughout the world.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Stainless steel 12C27
Country of production: France
Handle: Pistachio wood
Blade length: 80mm.
Blade thickness: 2.6mm.
Length closed: 110mm.
Total length: 193mm.
Weight: 88g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: wooden boxCB-PIST -
CRKT - Carson knife M21-14SFG - Special Forces - knife
Intended use: Tactical/Military
Blade: AUS-8 56/58HRC stainless steel
Taiwan blade production
Handle: Aluminum
Blade length: 100mm.
Blade thickness: 3.5mm.
Closed length: 135mm.
Total length: 235mm.
Balancing: -
Weight: 155g.
Closure: Liner Lock
Clip: removable and reversible in stainless steel
Scabbard: -
Notes: design by Carson - AutoLAWKS safety catchM21-14SFG -
CRKT - First Strike - Large Tactical Knife 2706 Tanto - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in excellent condition
* Commercially available: No
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: NO
* Sheath: in plastic material
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory
Blade: AUS-8 high-carbon 57/58HRC stainless steel
Handle: in cotton with stingray skin insert
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 290mm.
Weight: 322g.
Sheath: plastic material
Note:CRKT-AP-2706 -
CRKT - Provoke EDC Knife - 4050 - knife
The Provoke® EDC takes the powerful Kinematic™ technology of the original Provoke® karambit and applies it to a "standard" folding knife that is flexible in more ways than one. For all those who wanted the Kinematic™ opening but didn't need a karambit, you can now use the same innovative technology in a knife designed for everyday use. The Provoke® EDC features a new flat edge blade made of D2 steel (providing excellent edge retention) and a lightweight aluminum handle that allows it to fit comfortably in your pocket.
Unique innovation: thanks to the Kinematic® system, the blade opens with thumb pressure.
Superior performance: D2 steel for excellent edge retention
Strong and lightweight: Aluminum handle combines strength and minimal weight
Unique function: Wire-mounted clip for safe carrying
Intended Use: EDC / Collection
Production type: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: Aluminum
Blade length: 65mm.
Blade thickness: 3.3mm.
Length closed: 107mm.
Total length: 182mm.
Weight: 98g.
Closure: Side Lever (modified back lock)
Clip: stainless steel, retractable
Packaging: cardboard box with CRKT logos
Notes: Design by Joe CaswellC4050 -
Laguiole En Aubrac - Raw Buffalo Horn with Damascus Steel Blade - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless damasci steel
Country of manufacture: France
Handle: raw buffalo horn
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0512CBI/FDBI1 -
Laguiole En Aubrac - Horn point - spring engraved with Maltese cross - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Maltese cross symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Stainless steel 12C27
Blade production: France
Handle: Blond cow horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -LEA-croce-m -
Laguiole En Aubrac - Horn Point - spring engraved with Pilgrim's Shell - VG10 in Sanmai - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Pilgrim's shell symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
The blade uses 67-layer Japanese VG10 rolled steel, manufactured by Takefu Steel.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Damascus and Japanese VG10 rolled steel
Blade production: France
Handle: Blond Cowhorn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -aubrac-conchiglia -
Laguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife
These high quality knives, are handcrafted in the tradition of French Thiers cutlery.
This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.
The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.
The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly.
The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs.
The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.
Intended Use: Regional/Collection/Outdoor/Hunting
Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0514EBI -
Laguiole en Aubrac - Corkscrew Sommelier LOUPE Rosewood
Laguiole en Aubrac - Corkscrew Sommelier LOUPE Rosewood
Corkscrews French Laguiole en Aubrac
Corkscrew Sommelier LOUPE Rosewood
Superb Laguiole sommelier knife made from the famous Laguiole en Aubrac cutlery.
Made in France with certificate of authenticity.
Made of stainless steel with dark rosewood handle.
3 functions:
Curved blade with micro-teeth + corkscrew + bottle opener.
Warranty for life and 100% handcrafted.
Comes with wooden gift box.
Elegant corkscrew from the well-known French company Laguiole.
Each Laguiole is unique.
It is during the manufacturing process of the corkscrew that lies the difference between industrial production and craftsmanship, which is the only way to guarantee that each Laguiole is unique.
The LAGUIOLE EN AUBRAC company fits its Sommelier corkscrews with a special CONICAL worm. This feature allows the worm to enter the cork gradually, preventing the cork from breaking.
SOM990LPI -
CRKT - Provoke Compact - Kinematic Morphing Karambit - 4045 - knife
Intended Use: Tactical / Collection
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: Aluminum 6061-T6
Blade Length: 57mm.
Blade thickness: 3.7mm.
Length closed: 115mm.
Total length: 168mm.
Weight: 124g.
Closure: Side Lever (modified back lock)
Clip: Stainless steel, retractable
Package: Cardboard box with CRKT logos
Notes: Design by Joe CaswellC4045 -
CRKT - Woods Kangee T-Hawk by Ryan Johnson - 2735 - Tomahawk
Intended Use: Sporting / Hiking
Production Type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: Manganese phosphate
Handle: Walnut wood
Blade length: 88mm.
Blade thickness: 17mm.
Total length: 480mm.
Weight: 958g.
Scabbard: -
Notes: Design by Ryan JohnsonCR2735 -
Laguiole En Aubrac - Mandailles knife - Buffalo horn - knife
A handmade Laguiole en Aubrac knife made by a master craftsman from the region of origin of Laguiole. Extremely precise in its manufacture, it is decorated with the shepherd's cross on the handle. This cross allowed those who left during the long months of the transhumance to say their prayers once the knife was stuck in the bread.
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512BUMIF -
CRKT - Provoke Blue - Kinematic Morphing Karambit - 4041B - Knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade treatment: Blackwashed
Handle: Grivory
Blade length: 63mm.
Blade thickness: 5.4mm.
Length closed: 126mm.
Total length: 182mm.
Weight: 133g.
Closure: Side Lever (modified back lock)
Clip: stainless steel, retractable
Packaging: cardboard box with CRKT logos
Notes: Design by Joe CaswellC4041B