Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Leatherman - 4.5" Nylon Sheath with Pockets for Signal and Surge - 934933 - Replacement Accessories
Protect your multifunction tool with these revised nylon sheaths.
Every detail is designed to ensure the cases last a long time, are reliable and easy to use. High-quality metal rivet snap allows for a secure closure that keeps the tool safe.
It is made of durable stretch ballistic nylon with reinforced seams for better accessibility and fit. Extra pockets in this nylon sheath are made to carry a bit kit, a bit extender, and a small flashlight or marker. It fits belts up to 4.5 cm wide. The overall fit may vary depending on the accessories carried.
COMPATIBILITY.
* Free P2
* Free P4
* Signal
* Super Tool
* Surge
INTERNAL DIMENSIONS
12 x 3.8 x 2 cmLE934933 -
Leatherman - Thread Cutter Replacement Kit - 930350 - Accessories
Wire cutter replacement kit includes a set of replacement wire cutter inserts, two screws and a #8 Torx screwdriver for installation. Wire cutter inserts are made of premium stainless steel.
COMPATIBLE WITH:
* MUT®
* OHT
* Charge®+
* Charge®+ Forest Camo
* Charge®+ TTi
* Rebar
* Heritage Rebar
* Super Tool® 300+
* Heritage Super Tool 300
* Surge
* Surge® black and silver
* Wave®+
* Wave® black and silver
* Heritage Wave+
* Heritage Charge+
* FREE™ P2
* FREE™ P4
* Signal
* Signal® Topo
* Charge®+ G10
* 2H WaveLE930350 -
Leatherman - MOLLE Black XL sheath - LE930371 - Accessories
Compatible with the following Leatherman pliers:
* MUT®
* MUT® EOD
* Super Tool® 300
* Super Tool® 300 EOD
* Original Surge®
* Surge®
* Heritage Super Tool® 300
Heavy and robust nylon lining with Velcro closure and belt loop for both horizontal and vertical ports. Equipped with standard connections of the M.O.L.L.E. typeLE930366 -
Mac Coltellerie - 630 Training Knife - training knife
Intended use: training knife with rounded edge and tip
Type of production: industrial
Blade: stainless steel W 1.4028 - 55-56HRC
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 160mm.
Blade thickness: 4mm.
Total length: 290mm.
Balancing: advanced to 1cm from the guard branch
Weight: 296g. (378g. With scabbard)
sheath: in ABS
Note: -11026 -
Leatherman - Fodero MOLLE Black 4" - 931005 - Accessori
Compatibile con le seguenti pinze Leatherman:
* Sidekick
* Wingman
* Blast
* Kick
* Fuse
* Crunch
* Wave
* Charge
Fodero in pesante e robusto Nylon con chiusura in velcro e passante da cintura sia per porto orizzontale che per porto verticale. Dotato di attacchi standard di tipo M.O.L.L.E.LE931005 -
Leatherman - Ainsworth 4" Premium Leather Sheath - 934935 - Accessories
The Ainsworth sheath is made in Slovakia with premium full-grain leather, tanned with plant extracts and offers premium protection for your tool.
It is the best we have created to date. The Ainsworth leather sheath is made from drum-dyed, full-grain, vegetable-tanned cowhide. This treatment makes the leather fine and able to improve with time. The snap, customized button keeps your tool safe over years of use.
This sheath is premium protection for your Leatherman and is covered by our two-year warranty. It fits belts up to 4.5 cm wide. Internal capacity: 10.2 x 3.8 x 2 cm
Compatible with the following Leatherman pliers:
* Free P2
* Free P4
* Charge+
* Wave+
* Wingman
* Sidekick
* Rev
* Rebar
* SkeletoolLE934935 -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
Leatherman - 3-Way Magnetic Ratchet Screwdriver - 931030 - Accessories
Magnetic bit holder that allows secure positioning of both Leatherman flat and standard 63mm bits.
Compact 3-way ratchet system that allows continuous rotation in one direction, avoiding tool repositioning. The 3-way allows for a forward, reverse and locked setting.
SPECIFICATIONS
Length: 8.28 cm
Weight: 35.7 gCOMPATIBILITY:
* MUT (all versions)
* Charge (all versions)
* Charge+ (all versions)
* Signal (all versions)
* Skeletool (all versions)
* Super Tool 300M
* Surge (all versions)
* Wave (all versions)
* Wave+ (all versions)LE931030 -
Mac Coltellerie - San Marco Fighting Knife D2 - knife
Intended use: Military / Tactical / Collection
Type of production: industrial
Blade: 60-61HRC D2 Tool Steel
Blade treatment: Black Idroglider
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Design by Sandro Martinelli and Marco BellaniMAC-SM-D2 -
Leatherman - Skeletool KB - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -LE832385 -
Mac Coltellerie - Survival knife XJ24 - knife
Intended use: outdoor / survival
Type of production: industrial
Blade: 420 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 240mm.
Blade thickness: 4.7mm.
Total length: 375mm.
Weight: 460g. (626g. With scabbard)
sheath: in leather
Note:XJ24 -
Beretta K92 bullet knife
Beretta K92 bullet knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Blade: Japan
Blade: Stainless steel AUS-8
Treatment Blade:
Handle: Grilon
Blade length: 85mm.
Blade thickness: 4mm.
Closed Length 125mm.
Overall length: 220mm.
Thick when closed: 14mm.
Balancing: -
Weight: 50g.
Lock: back lock
Clip: -
Sheath: -
Packaging: cardboard box with Beretta logos
Notes: -K92 -
Beretta - AirLight K Air 3GN - Knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Blade: Japan
Blade: Stainless steel, three-layer laminate (VG2 and CoS to 60 HRC)
Treatment Blade:
Handle: Grilon
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length 111mm.
Total length: 197mm.
Thick when closed: 24mm.
Balance: -
Weight: 170g.
Lock: Liner Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Fallkniven
Notes: -kar3gn -
Mac Coltellerie - Tekno Daga 2 - diving knife
Country of manufacture: Italy
Blade: Stainless steel W 1.4116 55/56HRC
Blade finish: Idroglider Gold Black
Handle: PP with TPE overmolded
Blade length: 105mm.
Blade thickness: 3.8mm.
Total length: 210mm.
Weight: 140g.
Sheath: ABS with rubber ties for calf or forearm attachmentTKN10D-2N -
Sergio Consoli - N°098 Folding Walnut - Custom Knife
Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli9015€729.51Out of stock -
Mac Coltellerie - Z08 - knife
Destination: Military/Tactic/Collection
Type of manufacturing: industrial
Blade: W 1.4116 inox
Blade Treatment: IDROGLIDER GOLD® Black
Made in: Italy
Handle: Nylon reinforced with fiber glass, PP and TPE
Blade Length: 160mm.
Blade Thickness: 4,5mm.
Total Length: 290mm.
Balancing: on knife's guard
Weight: 288g. (with sheath 534g.)
Sheath: cordura with thigh band
Note: -11028 -
Mac Coltellerie - CQB Training Knife - coltello da allenamento
Destination: training knife, rounded point and dull edge
Type of manufacturing: industrial
Blade: stainless steel W 1.4116 - 55-56HRC
Blade Treatment: stonewash
Made in: Italy
Handle: polymers, REMOVABLE
Blade Length: 160mm.
Blade Thickness: 4mm.
Total Length: 290mm.
Balancing: toward the point, at 1 cm from knife guard
Weight: 314g. (474g. with sheath)
Sheath: cordura, with thigh band
Note: -11027 -
Mac Coltellerie - Tekno Training Knife - coltello da allenamento
Destination: training knife, rounded point and dull edge
Type of manufacturing: industrial
Blade: stainless steel W 1.4116 - 55-56HRC
Blade Treatment: stonewash
Made in: Italy
Handle: polymers
Blade Length: 97mm.
Blade Thickness: 3,5mm.
Total Length: 202mm.
Balancing: on knife guard
Weight: 170g. (212g. with sheath)
Sheath: cordura
Note: -11025 -
Mac Coltellerie - San Marco Fighting Knife RWL Limited Edition - knife
Intended use: Military / Tactical / Collection
Type of production: industrial
Blade: 59-60HRC RWL 34
Blade treatment: blackwash
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Limited Edition 2019 numbered on the blade - Design by Sandro Martinelli and Marco BellaniMAC-SM-RW -
Mac Coltellerie - San Marco Fighting Training Knife - training knife
Intended use: training knife with rounded edge and tip
Type of production: industrial
Blade: 440 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 314g.
sheath: in cordura
Notes: Design by Sandro Martinelli and Marco BellaniMAC-SM-TR -
Mac Knives - Sub Tekno Titanium - knife
Mac Knives - Sub Tekno Titanium - knife
Intended use: Underwater
Type of production: Industrial
Production Blade: Italy
Blade: Titanium beta
Treatment Lama: -
Handle material: PP TPE overmolded
Blade length: 108mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 210mm.
Thick when closed: -
Balance: -
Weight: 98g.
Closing: -
Clip: -
Sheath: ABS with rubber straps for fastening the calf
Packaging: Cardboard box with logos MAC
Notes:2310T