Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Lurisinga - Gallurese Razor Blade - Traditional Gallura Knife - Handcrafted Knife
The "Lurisinca," a traditional knife from Luras in Gallura, owes its name to the Lurese term for a local woman, reflecting the feminine nature of the "razor blade" used. The Gallurese Razor Blade, a typical Sardinian knife resembling a point-less shaving razor, was essential in cork processing, especially for making "quadretti," precursors to cork stoppers. However, this practice has declined due to the economic crisis, forcing many craftsmen to close their shops. The Gallurese Razor Blade, versatile and always at hand, represented an indispensable tool for every daily need.
Type of Production: Handcrafted
Blade Production: Italy
Blade: Stainless steel
Handle: Bovine horn tip
Blade Length: 80mm.
Blade Thickness: 2mm.
Closed Length: 90mm.
Total Length: 185mm.
Weight: 65g.
Lock: No blade lock
Packaging: Cardboard boxLU-GAL€77.87Only 1 left -
Le Petit Jouteur - Oyster Opener Knife Set and Leather Hand Guard
Handcrafted box containing a "Le petit jouteur" oyster knife and a leather hand guard.
Leaning the handle of your "Le Petit Jouteur" oyster knife against your ear, you may not hear the lapping of the waves ...
Oyster knife with mussel shell handle
Handcrafted made in France."Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.
High quality, very hard and ultra-strong thanks to a heat treatment process by cryogenization.
An ambidextrous, ergonomically shaped knife with a stainless steel blade that allows you to open shellfish quickly and safely.
A minimum of care and maintenance , will allow you to keep it in a state that will delight you for many years.
Included in the package is an ambidextrous hand guard made of handcrafted leather.
Weight 120 g
Dimensions 12 × 3.5 × 1.5 cm.
8169CON€65.57Only 1 left -
Laguiole En Aubrac - raw buffalo horn - knife
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: raw buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 72 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512CBI/FSI1 -
Laguiole En Aubrac - Le Randonneur knife - Boxwood collection knife
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Boxwood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RBI-LSB1 -
Laguiole en Aubrac - Sommelier sabre Lisse Origine Concorde - Sabrage
Laguiole en Aubrac - Sommelier sabre Lisse Origine Concorde - Sabrage
Sabrage is a special technique for opening champagne bottles with a sabre (sabre in French), usually used as a ceremonial gesture. The sabre is slid along the body of the bottle towards the neck with a sharp blow. The force of the blade striking the lip of the neck is sufficient to break the glass and separate the neck cleanly from the bottle collar which, together with the cork, is shot away by the force of the gas contained in the wine. When applied correctly, the technique is effective with any sparkling wine.
This practice became popular in Napoleonic France when the army visited the aristocratic domains belonging to the empire. The period was just after the French Revolution and the sabre was the weapon of choice for the army's light cavalry, the hussars. Given the numerous victories achieved by the army, there were many celebrations, during which it was customary to open the bottles by a convenient and easily available means. It seems that during one of these celebrations Napoleon himself said 'Champagne! In victory it is a merit; in defeat a necessity', thus encouraging its use and practice.
Champagne sabre entirely handmade in the town of Laguiole.
Authentic champagne sabre of premium Laguiole en Aubrac quality.
Unique piece of Sanvik 12C27 stainless steel, a martensitic stainless steel.
The composition of carbon and chromium offers a unique combination of properties including: very high hardness, very high wear and corrosion resistance.
White resin handle.
Each piece is a unique work of art, handmade by a craftsman.
Delivered in a gift box, manufactured in Aubrac, France
Blade: Stainless steel 12C27 mirror polished - unsharpened
Handle: WHITE RESIN
Blade length: 265mm
Total length: 405mm
Weight: 298g
Packaging: Wooden box with Laguiole en Aubrac logos.
C1S99OC -
Indiana - Miniature knife - Bowie Sitting Bull Black - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-TSB€23.77Only 1 left -
Indiana - Miniature knife - Bowie Bison - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-BI€23.77Only 2 left -
Indiana - Miniature knife - Bowie Survival - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-S€23.77Only 2 left -
Indiana - Miniature knife - Sitting Bull Bowie - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-TS€23.77Only 4 left -
No brand - Pocket tactical knife vintage - knives
tactical knife made in Taiwan around the early 90's - One-handed ambidextrous opening and back lock blade. Complete with cordura sheath
Type of production: Industrial
Production Lama: Taiwan
Blade: 440 steel
Blade treatment: satin blade
Handle: kraton
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 195mm.
Weight: 142g.
Sheath: in cordura
Note: -NB-1260€57.38Only 2 left -
No brand - Scout knife vintage - knives
Type of production: Industrial
Production Lama: Italy
Blade: 440A steel
Blade treatment: polished blade
Handle: plastic material
Blade length: 120mm.
Blade thickness: 2.5mm.
Total length: 240mm.
Weight: 84g.
Sheath: in leather
Note: -NB-SCOUT€15.57Only 4 left -
Laguiole en Aubrac - Set with acacia cutting board with cheese cutting thread and classical cheese knife
Laguiole en Aubrac - Set with acacia cutting board with cheese cutting thread and classical cheese knife
LAGUIOLE EN AUBRAC is one of the five blacksmiths that still forge knives around the village of Laguiole in southern France according to a centuries-old tradition and turn them into real gems of craftsmanship. Each piece is unique and from wood to mammoth ivory there is hardly any limit to the exclusivity of the materials. Laguiole en Aubrac - acacia board with cheese cutting wire and cheese knife A set of the extra class for every cheese connoisseur and lover of a well-tended cheese platter.
The simple rectangular acacia wood board has a groove and a cutting wire with a stainless steel bracket.
The set also includes the cheese knife with a classic shape, ornament and bee. High-gloss polished stainless steel jaws. This cheese knife is also available in buffalo horn and different types of wood. Suitable for all Laguiole en Aubrac cutlery. The set is delivered in a elegant paper box.
Manufacturer: Laguiole en Aubrac
Handcrafted French Classical cheese knife - 24.5 cm
Blade 12,5 cm
12C27 stainless steel Corn handle.
SETFRGM -
Laguiole En Aubrac - Sauveterre knife in buffalo horn - handmade knife
French regional knife handcrafted in the city of Sauveterre
Blade: Swedish 12C27 to 54HRC stainless steel.
Handle: horn
Blade length: 90 mm.
Blade thickness: 3 mm.
Total length: 200 mm.
Weight: 90 g.
Folders: Stainless Steel
Heads: Stainless steel
Closure: Stainless steel retention spring
Clip: Absent
Sheath: AbsentSA509BUI -
Laguiole En Aubrac - Oyster Opener Knife with mussel shell handle - Gift box
Laguiole En Aubrac - Oyster Opener Knife with mussel shell handle - Gift box
Ref.C2I99CQMIH - Oyster knife with mussel shell handle Presitigioso Open Oysters Laguiole En Aublrac.
Handcrafted realization
Blade: 12C27
Stainless Steel Handle: in shell of mussels.
Blade length: 60 mm.
Blade thickness: 3 mm. T
otal length: 180 mm.
Packaged in an elegant wooden box.
8169C -
Laguiole En Aubrac - Olive Wood Stainless Steel Wine and Cheese Set in box 3 Pieces
Laquiole En Aubrac Waiters Corkscrew Wine Opener Forged stainless steel blades Olive wood handles, finished by hand Unique Laguiole is pronounced "Laiole" is a village in France renewed for its artisanal hand finished cutlery. Inspired by this region of the world , this set has preserved the craftsmanship in its manufacturing process. The metal is forged then finished and assembled by hand. The Ulive Wood access add the finishing touch to this big-quality laguiole product. Laguiole Set of Wine and Cheese Set Stainless steel blades Smooth easy grip wood handles Unique wood veneer Stone Finished steel blade and Ulive wood hadles Built to last with with quality materials. Olive wood is exceptional quality Veneer handle is implanted with phenolic thermosetting resins which creates a durable dimension stable handle Moisture resistant finishes last a lifetime The color in the Olive wood and grain structure creates unique to each piece Wooden presentation box 2 knives lenght 24cm cheese/ 18cm butter1253SET -
Laguiole en Aubrac - Set of 3 grey glitter resin Cheese Knives
Laguiole GREY GLITTER RESIN Cheese Knives - Laguiole En Aubrac, Set of 3 These heirloom-quality knives, designed to last a lifetime and crafted by French artisans with the highest-quality materials, make a truly special gift for wedding or corporate events, finely crafted knives. An exquisite gift or elegant complement to your wine & cheese fete. Each set includes 3 knives packaged in a wooden storage box. The blades are forged from ultrastrong Sandvik steel. The handles are handcrafted from ;grey glitter resin Made in France's Laguiole region. Includes a certificate of authenticity and a lifetime warranty. Set includes 3 pieces: plane, knife and soft cheese spreader. Size (inches): 1 1/2w x 9h (plane), 1w x 9 1/4h (knife), 1w x 7 1/4h (soft spreader) Genuine Laguiole en Aubrac grey glitter resin cheese knives are hand-made in France by master craftsmen and guaranteed for life.5551CORIAN -
Le Petit Jouter - Oyster Opener Knife - Walnut
Walnut oyster knife
Presitigious Oyster Opener with wooden handle.
Made in France craftsmanship.
The "Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.
High quality, very hard and ultra-strong, thanks to a heat treatment process by cryogenization.
An ambidextrous oyster spear blade.
Wood handle from French forests .
They use wood of French origin to decorate the handles, which are machined and assembled in France.
A minimum of care and maintenance ,
will enable you to keep your oyster knife in a condition that will amaze you for many years.
8169ostriche€34.42Only 1 left -
Roncola gardening made in Italy - steel blade
Robust hatchet work, perfect for gardening or work in the country.
Production Lama: Italy
Blade: stainless steel curve
Handle: Wood
Blade length: 75mm.
Blade Thickness: 3.5 mm.
Closed Length: 115mm.
Thick when closed: 26mm.
Overall length: 195mm.
Weight: 145g.
Closing: bladeless blockron-1€28.69Only 2 left -
Boss - Folder knife by David Winch - coltello sportivo
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No
* Sharpening: YES
* Marks on blade: No
* Marks on handle: No
* Box: wooden
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryType of production: Industrial
Blade: 440A steel
Blade Treatment: -
Handle: G10 Black
Blade length: 80mm.
Blade thickness: 3mm.
Total length: 195mm.
Weight: 80g.
Note: -BO-DW€61.48Only 2 left -
Laguiole En Aubrac - Capucin carbon and bronze - 8cm - collection knife
Intended use: Sports / collection
Type of production: Industrial
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: satin
Handle: carbon fiber and copper
Blade length: 77mm.
Blade thickness: 2.5mm.
Closed length: 100mm.
Total length: 177mm.
Thick when closed: 20mm.
Balancing: -
Weight: 47g.
Closing: -
Clip: -
Sheath: -
Packaging: -
Note: -L0510CCBI -
Condor - Ascia integrale - coltello
Produttore: Condor - Italy
lunghezza totale: 30 cm
lunghezza lama: 9,5 cm
lunghezza manico: 11,5 cm
peso: 697 gr
tipo acciaio: 420 inox
materiale impugnatura: micarta
note: fodero in cuoio7202€49.18Only 2 left -
CRC - 5-56 - Olio Sbloccante Lubrificante Anticorrosivo Idroespellente
Confezione promozionale da 200ml: penetra, sblocca, deterge, lubrifica, espelle l'umidità, arresta ed impedisce la corrosione, elimina le dispersioni elettriche.
Penetra profondamente riducendo la tensione superficiale all'interfaccia metallo/ossido; sblocca dadi, raccordi e cerniere.
Espelle l'umidità dalle fesure più minute. Non contiene siliconi. Non altera la conducibilità dei contatti. Consente l'avviamento di motori bagnati. Impedisce la formazione del ghiaccio.
Energico solvente di grassi, catrame e residui della combustione. Deterge carburatori, catene di moto, mozzi ruota, pistoni di ammortizzatori ecc.
Elimina i cigolii e lubrifica le parti più profonde di serrature, cardini, lucchetti, comandi a cavetto ecc..6443€12.30Only 2 left -
CRC - 6-66 Marine - Olio per arrestare e impedire la corrosione - accessori coltelli
Confezione da 200m. - Olio concepito per utilizzi marini in presenza di acqua salmastra: penetra, sblocca, espelle l'umidità, arresta ed impedisce la corrosione, elimina le dispersioni elettriche, deterge e lubrifica.
Per attrezzature subacquee: penetra profondamente riducendo la tensione superficiale all'interfaccia metallo/ossido arrestanto processi corrosivi in corso unendosi polarmente ai metalli impedendone l'ossidazione, specialmente in ambiente salmastroso.
Espelle l'umidità, Elimina l'effetto cortocircuitante e la dispersioni a massa dovute agli elettroliti. Non contiene siliconi. Non altera la conducibilità dei contatti. Consente l'avviamento di motori bagnati.
Energico detergente. Elimina patine di morchia o grumi untuosi e salati che possono determinare dispersione di corrente o innescare processi corrosivi.
Riduce il coefficiente di attrito e svolge un'efficace azione lubrificante.6434€12.30Only 2 left -
CRC - Gun Store - Olio Protettivo a lunga durata - accessori coltelli
Flacone da 200ml.
Protegge spade, coltelli ed armi da fuoco durante lunghi periodi di inutilizzo.
Forma un film oleoso non essiccante che rende ogni tipo di metallo e acciaio inattaccabile da qualunque agente atmosferico. Neutralizza l'effetto corrosivo delle ceneri e del contatto con le mani. Espelle e respinge l'umidità. Al coperto ed in condizioni ambientali normali impedisce la corrosione per un periodo di circa dua anni.
Su armi da fuoco non occorre rimuoverlo pria dell'uso; in caso di necessità si può comunque asportare con CRC GUN CARE che deterge e assicura una protezione e lubrificazione più compatibile con un utilizzo costante.6432€12.30Only 2 left -
Hubertus Solingen - Outdoor knife - Vintage - sports knife
Type of production: industrial
Blade: 440 stainless steel
Blade treatment: -
Blade production: -
Handle: aluminum
Blade length: 11mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 225mm.
Balancing: -
Weight: 144g.
Closure:
Clip: -
Sheath: in leather
Note: -HS-V-OUT€45.08Only 2 left -
Laguiole en Aubrac - 3-piece cheese set - guim blanc
Laguiole en Aubrac 3-piece cheese set - guim blanc
The knives by Laguiole en Aubrac combine the long tradition of knife makers in perfect symbiosis with a penchant for perfection, while the price, though, can be measured in worldly standards.
As is for all genuine French Laguiole knives, the traditional shepherds cross in the RESIN GUIM handle, the hand-made engravings on the spine and the bee are a must, including for this cheese set.
It is carefully manufactured by hand and reflects the French tradition and dining culture. Please hand wash (only).
5551 -
Laguiole En Aubrac - Alsacien Ebony - ALS99EBC / NSB1 - knife collection
Destination: French collector's regional knife
Blade: 12C27 Swedish polished stainless steel to 54HRC.
Handle: ebony wood
Blade length: 70 mm.
Blade thickness: 2.5 mm.
Total length: 180 mm.
Weight: 70 g.
Folders: Stainless Steel
Heads: Stainless Steel
Closure: Retention spring
Clip: Absent
Sheath: Absent2481 -
Laguiole En Aubrac - Le Randonneur knife - Ginepro coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Ginepro
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512REI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Oak knife collection
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Oak wood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RHI-FSB1 -
Laguiole En Aubrac - Le Randonneur knife - Olivo coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Olivo
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RLI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Wengè coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Wengè
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RWI-LSB1 -
Laguiole En Aubrac - Texalium - coltello collezione
Coltello chiudibile realizzato artigianalmente dalla Laguiole En Aubrac una delle migliori e più antiche aziende francesi produttrici di coltelli “Laguiole”.
– Acciaio Lama: 12C27 lucidata a specchio
– Manicatura: in Fibra di Carbonio e Texalium
– Lunghezza totale: cm 21,5
– Lunghezza lama: cm 10
– Molla e “mosca” o “ape” (simbolo che contraddistingue un Laguiole visibile sul dorso del coltello) forgiata
– Peso: 89 grammi
3258 -
Mondin - 16cm cleaver with Collini blade cover - Kitchen knife
Recommended use: Processing raw meat, bone and cartilage.
Country of manufacture: Italy
Blade: Surgical steel 54-56 HRC
Handle: Non-toxic, non-deformable, impact-resistant Nylon 6/6, perfectly sterilizable up to 180°.
Blade length: 16cm.
Total length: 30cm.
Weight: 519g.
M16€20.49Only 3 left -
Laguiole En Aubrac - Ebony and Mammoth Fossil Ivory - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless steel Sandvik 12C27
Country of manufacture: France
Handle: ebony wood with mammoth fossil ivory insert
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L-ENEBAVFM -
Artigiano Scarperia - Love Knife Fusetto in Deer - hand-engraved - handmade knife
In some areas of central and southern Italy, it was customary to give knives as engagement or wedding gifts, assigning the knife the task of sanctioning the love bond.
There was a strong identification between man and knife: the lover who gave such a gift to the woman symbolically offered himself, while the gift given to the man could be interpreted as an exhortation to virile valor.
Some specimens of this historical knife also served as protection against the evil eye, featuring the characteristic “dice eyes” on the handle, while the blades were traditionally engraved with decorative and symbolic elements.
The love knives were also indicative of the social class of the family: less wealthy couples, unable to afford very elaborate knives, sanctioned their love with simpler, less worked, and less expensive objects, but identical in values and meanings.
Type of production: artisanal
Blade production: Italy
Blade: Stainless steel C70
Blade treatment: -
Handle: Deer horn with buffalo horn inserts and silver plaque
Blade length: 82mm.
Blade thickness: 2mm.
Closed length: 100mm.
Total length: 183mm.
Weight: 54g.
Closure: without blade lock
Packaging: cardboard packaging with certificatesThe brand Artigiano Scarperia was established in 2007 by two expert knife makers, Fabio Gasparrini and Alessandro Conti. Drawing inspiration from ancient art, they create refined cutlery for the kitchen and table, assortments of personal care items and office supplies, as well as various objects in horn and wood. All products are handcrafted, using traditional techniques without the use of machinery.
For this reason, any variations in material and workmanship are not considered flaws, but distinctive features of a unique product, handcrafted and of high quality.
AP-CAFB€0.00Only -50 leftOut of stock -
Laguiole En Aubrac - Le Camembert - Pistachio Wood - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This knife is dedicated to Camembert and is sold in the round wooden box typical of this famous cheese known throughout the world.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Stainless steel 12C27
Country of production: France
Handle: Pistachio wood
Blade length: 80mm.
Blade thickness: 2.6mm.
Length closed: 110mm.
Total length: 193mm.
Weight: 88g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: wooden boxCB-PIST -
Laguiole En Aubrac - Raw Buffalo Horn with Damascus Steel Blade - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless damasci steel
Country of manufacture: France
Handle: raw buffalo horn
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0512CBI/FDBI1 -
Treeman Knives - Recon Hunter Knife - Green G-10 - PRIVATE COLLECTION - knife
KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available: No longer in production
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Not present
* Scabbard: In Kydex
* Manuals, Certificates and Warranties: NO
* Checked and certified by our internal laboratoryIntended Use: Tactical/Collection
Production Type: Semi-Industrial
Country of manufacture: USA
Blade: Carbon steel O1
Blade treatment: Grey Cerakote
Handle: G-10 Green
Blade length: 110mm. (100m. cutting edge)
Blade thickness: 4.6mm.
Total length: 230mm.
Balance: set back approx. 3 cm from the edge of the cheek piece
Weight: 260g. (353g. including scabbard)
Sheath: Kydex, with Kydex belt attachment
Packaging: Without box and certificates
Notes: -AP-TREE-RECON€0.00Only -20 leftOut of stock -
Laguiole En Aubrac - Horn point - spring engraved with Maltese cross - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Maltese cross symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Stainless steel 12C27
Blade production: France
Handle: Blond cow horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -LEA-croce-m -
Laguiole En Aubrac - Horn Point - spring engraved with Pilgrim's Shell - VG10 in Sanmai - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Pilgrim's shell symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
The blade uses 67-layer Japanese VG10 rolled steel, manufactured by Takefu Steel.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Damascus and Japanese VG10 rolled steel
Blade production: France
Handle: Blond Cowhorn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -aubrac-conchiglia -
Laguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife
These high quality knives, are handcrafted in the tradition of French Thiers cutlery.
This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.
The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.
The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly.
The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs.
The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.
Intended Use: Regional/Collection/Outdoor/Hunting
Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0514EBI -
Charlton Ltd - Custom Damascus Bob Lum style Tanto - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - knife dating back to the late 80s
* Condition: excellent condition
* Commercially available: Discontinued since 2018
* Sharpening: Factory
* Marks on blade: No
* Signs on the handle: very small marks
* Box: packaging
* Sheath: in wood
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Collection / Vintage
Type of production: handcrafted
Country of production: USA
Blade: hand forged Damascus steel
Blade treatment: -
Handle: in wood
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 230mm.
Weight: 245g.
Scabbard: wooden scabbard
Notes: limited edition 1 of 200AP-CHLTD€0.00Only -50 leftOut of stock -
Denis Simonutti - Mist - Limited Edition #4 - M390 Black PVD Titanium - Craft Knife
Intended Use: Collection
Type of production: Midtech
Country of Production: Italy
Blade: Stainless steel M390 58/60HRC
Blade Treatment: PVD Blacwashed
Handle: Titanium with PVD Blacwashed treatment and bronze-colored anodized titanium spacers
Blade length: 78mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 180mm.
Weight: 110g.
Closure: FrameLock
Clip: Bronze-colored anodized titanium, machined from solid
Packaging: Denim pouch, warranty certificate, Velcro patch, small 6-sided playing dice
Notes: Designed and made by Denis Simonutti - Specimen number 4 of a micro-production batch of only 10 piecesDS-MIST4€0.00Only -50 leftOut of stock -
Laguiole en Aubrac - Corkscrew Sommelier LOUPE Rosewood
Laguiole en Aubrac - Corkscrew Sommelier LOUPE Rosewood
Corkscrews French Laguiole en Aubrac
Corkscrew Sommelier LOUPE Rosewood
Superb Laguiole sommelier knife made from the famous Laguiole en Aubrac cutlery.
Made in France with certificate of authenticity.
Made of stainless steel with dark rosewood handle.
3 functions:
Curved blade with micro-teeth + corkscrew + bottle opener.
Warranty for life and 100% handcrafted.
Comes with wooden gift box.
Elegant corkscrew from the well-known French company Laguiole.
Each Laguiole is unique.
It is during the manufacturing process of the corkscrew that lies the difference between industrial production and craftsmanship, which is the only way to guarantee that each Laguiole is unique.
The LAGUIOLE EN AUBRAC company fits its Sommelier corkscrews with a special CONICAL worm. This feature allows the worm to enter the cork gradually, preventing the cork from breaking.
SOM990LPI -
Le Petit Jouter - Oyster Opener Knife - Oyster Shells
Oyster Knife
Presitigious Oyster Opener with handle made of stabilized oyster shells.
Made in France craftsmanship.
The "Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.
High quality, very hard and ultra-strong, thanks to a heat treatment process by cryogenization.
An ambidextrous oyster spear blade.
A minimum of care and maintenance ,
will enable you to keep your oyster knife in a condition that will amaze you for many years.
A nice discovery that of this oyster knife.
At last a useful and well-designed knife.
It should be mentioned that its designer, Benjamin Auzier, is a designer at @Laguiole.
He had the good idea of surrounding himself with oyster professionals from the Mediterranean basin.
He envisioned a tool that both left-handed and right-handed people can use without risk and with formidable efficiency. His workshop is located in La Boissière, in the Hérault.
The originality of its balanced and symmetrical teardrop shape over a length of 12 centimeters suits all hand morphologies.
If you want to have a practical professional tool for opening shellfish, the Little Juggler is for you.
Or for an original gift to a family member or friend.
8169O-C€45.08Only 0 leftOut of stock -
Laguiole En Aubrac - Mandailles knife - Buffalo horn - knife
A handmade Laguiole en Aubrac knife made by a master craftsman from the region of origin of Laguiole. Extremely precise in its manufacture, it is decorated with the shepherd's cross on the handle. This cross allowed those who left during the long months of the transhumance to say their prayers once the knife was stuck in the bread.
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512BUMIF -
E.G. Custom - Hunting knife - horn and briar handle - entirely handmade
handcrafted knife entirely handmade with grinding wheel and file. The blade is made of ledeburitic steel with 2.3% carbon obtained by powder metallurgy and reaches a hardness of 64 HRC. Perfect for hunting and outdoor use.
Intended use: collection / hunting
Type of production: custom
Production Lama: USA
Blade: 64HRC powder steel
Blade treatment: -
Handle: in deer horn and tuya burl with brass guard
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 172g.
Sheath: in brown leather sewn and handmade
Notes: knife made in Italy in the late 90s - certificate of the craftsmanCUS-1€0.00Only -20 leftOut of stock -
Hubertus Solingen - Bavarian Picnic Knives - 11 cm - genuine stag horn - vintage knife
Bavarian dress knife or Bavarian picnic knife are the common English terms for the special type of fixed blade knife called Trachtenmesser in Germany. These knives are found in the right side pocket of a traditional Bavarian leather pant and only part of the handle is visible as you pass that pocket.
Bavarian dress knives are characterized by the particular shape of the blade and in most cases by a decorated ring. This ferrule constitutes the passage between the blade and the handle of the deer horn or other hunting trophies that is fixed with the tang. A dark brown leather sheath is slid over the blade for protection purposes.
Intended use: Hunting / Collection
Blade: 440 stainless steel
Handle: Deer
Blade length: 110mm.
Blade thickness: 4mm.
Total length: 225mm.
Balancing: -
Weight: 109g.
Sheath: in leatherHS-1910-CE -
Indiana - Hunting knife Gran Safari - in deer horn - vintage knife
Rare hunting knife produced around the 1980s by the Indian company from Maniago. This extremely innovative knife for the years of production, is characterized by a handle entirely made of aluminum with natural horn insert. Excellent blade geometry for hunting and outdoor use
Intended use: Collection
Type of production: semi-artisanal
Blade: 440 stainless steel
Production Lama: Italy
Handle: aluminum and horn
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Balancing: -
Weight: 125g.
Closure: back lock
Clip:
Sheath: -
Note: -IN-HU-CO€172.13Out of stock -
Indiana - Hunting knife Gran Safari - buffalo horn - vintage knife
Rare hunting knife produced around the 1980s by the Indian company from Maniago. This extremely innovative knife for the years of production, is characterized by a handle entirely made of aluminum with natural horn insert. Excellent blade geometry for hunting and outdoor use
Intended use: Collection
Type of production: semi-artisanal
Blade: 440 stainless steel
Production Lama: Italy
Handle: aluminum and horn
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Balancing: -
Weight: 125g.
Closure: back lock
Clip:
Sheath: -
Note: -IN-HU-BU€229.51Out of stock -
Indiana - Set 3 pieces miniature knives - Survival Tanto series - collection knife
Faithful miniature reproduction of survival knives produced in Italy around the 90s
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Sheath: vinyl cordura sheath
Big Knife
Blade length: 75mm.
Blade thickness: 2mm.
Total length: 130mm.
Weight: 36g.Medium Knife
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 90mm.
Weight: 15g.Small Knife
Blade length: 30mm.
Blade thickness: 2mm.
Total length: 50mm.
Weight: 3g.IN-SET1€0.00Only -20 leftOut of stock -
Laguiole En Aubrac - Oyster Opener Knife with oyster shell handle - Gift box
Laguiole En Aubrac - Oyster Opener Knife with oyster shell handle - Gift box
Ref.C2I99CQHI - Oyster knife with oyster shell handle
Presitigioso Open Oysters Laguiole En Aublrac.
Handcrafted realization
Blade: 12C27 Stainless Steel Handle: in oyster shell.
Blade length: 60 mm.
Blade thickness: 3 mm.
Total length: 180 mm.
Packaged in an elegant wooden box.
8169A -
Wildrock Gear - Strikeback Tomahawk Desert Camo - D2 steel - ax
Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.
Intended use: Tactical / Allround
Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | SmashingWRK-TOM-DC€401.64Only 0 leftOut of stock -
Wildrock Gear - Strikeback Tomahawk Camo - D2 steel - ax
Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.
Intended use: Tactical / Allround
Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | SmashingWRK-TOM-C€401.64Only 0 leftOut of stock -
Linder - Master Hunter in plum and brass - 191415 - hunting knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: Germany
Blade: 440A stainless steel
Blade treatment: Satin finish
Handle: plum wood with brass guard and knob
Blade length: 155mm.
Blade thickness: 5.5mm.
Total length: 270mm.
Balancing: set back
Weight: 248g.
Sheath: in leather
Packaging: Cardboard box with Linder logos
Note: -LI-191415 -
Linder - Stag Bowie - 196118 - hunting knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: Germany
Blade: 440C stainless steel
Blade treatment: Satin finish
Handle: Stag with steel guard and aluminum knob
Blade length: 177mm.
Blade thickness: 4.5mm.
Total length: 305mm.
Balancing: advanced
Weight: 274g.
Sheath: in leather
Packaging: Cardboard box with Linder logos
Note: -LI-196118 -
Bob Dozier - Dagger Liner Lock Folder D2 Steel - Titanium - custom knife
Rare knife handcrafted by Bob Dozier in 2001, made of D2 steel with sandblasted titanium handle and anodized details.
Intended use: Collection
Type of production: handmade
Country of production: USA
Blade: in D2 steel at 61HRC
Blade treatment: satin finish
Handle: in titanium with anodized details
Blade length: 105mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 250mm.
Weight: 170g.
Closure: Liner Lock
Clip: titanium, removable
Notes: made entirely by hand by Bob Dozier in 2001Dozier-SP€0.00Only -20 leftOut of stock -
Laguiole - En Aubrac - Trappeur Olive knife - knife
Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.
Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:LEA-T-W -
Laguiole En Aubrac - Camel bone with Japanese SanMai blade - knife
Intended use: Regional / Collection
Type of production: handmade
Blade: Japanese "sanmai" laminated steel with external damask cheeks and VG10 to 61HRC cutting edge
Country of production: France
Handle: Camel bone
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Weight: 104g.
Closure: back retention spring
Clip: absent
Sheath: absentL0512O1H -
Hydra Armaments - Hecate knife tactical stonewashed - craft knife
Type of production: Artisan
Lama production: Italy
Blade: integral, D2 (59-61 HRC) with cryogenic treatment
Blade treatment: satin
Handle: G10 with 3D texture
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 280mm.
Balancing: set back
Weight: 425g.
Sheath: Kydex with belt attachment and MOLLE clip attachment
Package: -
Notes: limited series of 40 pieces.HA-HED2SW€0.00Only -99 leftOut of stock -
Erapuu Antler - Lappland Carver Finland knife 62 - knife
Finnish artisan knife.
These knives are a perfect combination of tradition and construction quality.Intended use: Hunting / Sports
Type of production: artisan
Blade: 59HRC carbon steel
Lama production: Finland
Handle: bone with brass bolster
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 165mm.
Balancing: on the guard branch
Weight: 84g.
Sheath: Brown leather
Note:14550€0.00Only -20 leftOut of stock -
Erapuu Antler - Pocket Finland knife - knife
Finnish artisan knife.
These knives are a perfect combination of tradition and construction quality.
Intended use: Hunting / Sports
Type of production: artisan
Blade: 59HRC carbon steel
Lama production: Finland
Handle: bone
Blade length: 55mm.
Blade thickness: 2mm.
Total length: 125mm.
Balancing: on the guard branch
Weight: 62g.
Sheath: in bone
Note:14553€53.28Out of stock -
Erapuu Antler - Lappland Carver Finland knife 95 - knife
Finnish artisan knives.
These knives are a perfect combination of tradition and construction quality.
Intended use: Hunting / Sports
Type of production: artisan
Blade: 59HRC carbon steel
Lama production: Finland
Handle: bone with brass bolster
Blade length: 93mm.
Blade thickness: 3mm.
Total length: 205mm.
Balancing: on the guard branch
Weight: 114g.
Sheath: Brown leather
Note:14551€0.00Only -20 leftOut of stock -
Laguiole En Aubrac - Lo Fau in boxwood - regional knife
Intended use: Collection / Sports
Type of production: artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Boxwood
Blade length: 82mm.
Blade thickness: 2.4mm.
Length closed: 111mm.
Total length: 193mm.
Weight: 53g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruiningLFU99WAI -
Laguiole En Aubrac - Laguiole bovine horn tip 12cm - collection knife
Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.
The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".
The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.
The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.
Intended use: Collection / SportsType of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Mirror polished
Handle: Tip of bovine horn
Blade length: 112mm.
Blade thickness: 3mm.
Length closed: 143mm.
Total length: 255mm.
Weight: 80g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruiningL0514BUI-FSI1 -
Laguiole En Aubrac - Fidelis Ebène - regional knife
The "Fidelis" was born from the desire to pay homage to the "medieval Larzac", with its old Templar villages and legends.
It is a knife that symbolizes the roughness of this land, the rusticity of its vegetation and its climate, but also the nobility of women and men who have worked, modeled, guarded and inserted into this object a soul.
Made in Millau, in the heart of Aveyron, in the cutlery workshops "L'ame du Causse", it is worked with noble materials, such as the precious wood of ebony that the Knights Templars have brought back to their return. Its "sage leaf" blade, made of 12C27 steel, renowned for its cutting quality and ease of maintenance, will be a guarantee of longevity. The "Fidelis" will be your ideal companion to share moments of everyday life full of history.Intended use: Regional
Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade treatment: Satin
Handle: Ebony wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Opening: manual, two-handed
Closure: upper safety ring
Packaging: cardboard case
Note: -2996F -
Laguiole - En Aubrac - Trappeur Olive knife - knife
Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.
Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:L0514TOLI -
Laguiole en Aubrac - Carbon fiber with SanMai blade - knife
Intended Use: Regional / Collection
Type of production: Hand
Blade: sanmai steel with sharp VG10 burnished and damask cheeks to 32 layers
Production Country: France
Handle: Carbon fiber with aluminum liners
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Weight: 70g.
Closure: retaining spring
Clip: absent
Sheath: absent
Notes: -au-carbon -
Laguiole en Aubrac - Ash Wood with blade sanmai - knife
Intended Use: Regional / Collection
Type of production: Hand
Blade: laminated damask steel and VG10 Japanese
Production Country: France
Handle: wood ash
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Weight: 104g.
Closure: retaining spring
Clip: absent
Sheath: absent
Notes: -12646