Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Aitor - Jungle King II Black knife - Black Sheath - 16013 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16013N -
Laguiole En Aubrac - raw buffalo horn - knife
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: raw buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 72 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512CBI/FSI1 -
Laguiole En Aubrac - Le Randonneur knife - Boxwood collection knife
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Boxwood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RBI-LSB1 -
Aitor - Jungle King I knife Black - green sheath - 16016V - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos16016V -
Laguiole En Aubrac - Sauveterre knife in buffalo horn - handmade knife
French regional knife handcrafted in the city of Sauveterre
Blade: Swedish 12C27 to 54HRC stainless steel.
Handle: horn
Blade length: 90 mm.
Blade thickness: 3 mm.
Total length: 200 mm.
Weight: 90 g.
Folders: Stainless Steel
Heads: Stainless steel
Closure: Stainless steel retention spring
Clip: Absent
Sheath: AbsentSA509BUI -
Laguiole En Aubrac - Capucin carbon and bronze - 8cm - collection knife
Intended use: Sports / collection
Type of production: Industrial
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: satin
Handle: carbon fiber and copper
Blade length: 77mm.
Blade thickness: 2.5mm.
Closed length: 100mm.
Total length: 177mm.
Thick when closed: 20mm.
Balancing: -
Weight: 47g.
Closing: -
Clip: -
Sheath: -
Packaging: -
Note: -L0510CCBI -
Aitor - Jungle King II Black knife Camo - 16071 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16071 -
Aitor - Commando Black knife - 16021 - knife
Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.
Intended use: Collection / Sports
Blade: Teflon-coated 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing threadAI-16021 -
Aitor - Commando Satin knife - 16020 - knife
Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.
Intended use: Collection / Sports
Blade: 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing threadAI-16020 -
Aitor - Jungle King I knife Black - 16016N - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16016N -
Aitor - Jungle King II Black knife - 16013N - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16013 -
Aitor - Jungle King II knife satin - 16012 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16012 -
Aitor - Jungle King III - 16017 - Survival Knife
Intended use: Sport
Type of production: Industrial
Production Blade: Spain
Blade: 440C stainless steel
Treatment Lama: -
Handle: PVC
Blade length: 106mm.
Blade thickness: 2.5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 120g.
Closing: -
Clip: -
Sheath: PVC and nylon sling and with tourniquet
Packaging: cardboard box with logos Aitor
Notes: compass and survival kit inside the handleAI-16017 -
Laguiole En Aubrac - Alsacien Ebony - ALS99EBC / NSB1 - knife collection
Destination: French collector's regional knife
Blade: 12C27 Swedish polished stainless steel to 54HRC.
Handle: ebony wood
Blade length: 70 mm.
Blade thickness: 2.5 mm.
Total length: 180 mm.
Weight: 70 g.
Folders: Stainless Steel
Heads: Stainless Steel
Closure: Retention spring
Clip: Absent
Sheath: Absent2481 -
Laguiole En Aubrac - Le Randonneur knife - Ginepro coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Ginepro
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512REI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Oak knife collection
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Oak wood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RHI-FSB1 -
Laguiole En Aubrac - Le Randonneur knife - Olivo coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Olivo
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RLI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Wengè coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Wengè
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RWI-LSB1 -
Laguiole En Aubrac - Texalium - coltello collezione
Coltello chiudibile realizzato artigianalmente dalla Laguiole En Aubrac una delle migliori e più antiche aziende francesi produttrici di coltelli “Laguiole”.
– Acciaio Lama: 12C27 lucidata a specchio
– Manicatura: in Fibra di Carbonio e Texalium
– Lunghezza totale: cm 21,5
– Lunghezza lama: cm 10
– Molla e “mosca” o “ape” (simbolo che contraddistingue un Laguiole visibile sul dorso del coltello) forgiata
– Peso: 89 grammi
3258 -
Laguiole En Aubrac - Ebony and Mammoth Fossil Ivory - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless steel Sandvik 12C27
Country of manufacture: France
Handle: ebony wood with mammoth fossil ivory insert
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L-ENEBAVFM -
Chris Reeve - Inyoni Drop Point - MagnaCut & Natural Canvas Micarta - knife
In the tradition of Chris Reeve Knives, the Inyoni bird and fish hunting knife takes its name from the Zulu word for "bird." Light as a feather, weighing 68 grams, the latest version of the Inyoni offers all the functionality of its predecessor, without the weight.
Its full-tang drop point blade makes it the ideal knife for processing birds and fish, while providing ample edge for many stages of processing larger game, as well as a long list of other cutting tasks outside the hunting field. The thin Kydex sheath fits perfectly over the handles of the Inyoni.
Intended use: sports/hunting
Type of Manufacture: MidTech
Country of Manufacture: USA
Blade: full tang in CPM MagnaCut 63/64HRC steel
Blade finish: stonewashed
Handle: Micarta
Blade length: 96mm.
Blade thickness: 3.2mm.
Total length: 202mm.
Weight: 68g.
Sheath: Slim Fit in thermoformed Kydex.
Packaging: cardboard box with Chris Reeve logos, paracord lanyard, maintenance key, certificates and warrantiesCR-INY-1001 -
Chris Reeve - Sable III Integral Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new, never used
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratoryIntended Use: Collecting/Hunting/Sporting
Production type: Midtech
Country of Production: USA
Blade: A2 55/57HRC steel
Blade Treatment: gunkote
Handle: A2 55/57HRC steel with alluminium screwed cap
Blade length: 108mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 203g.
Sheath: Black leather
Packaging: -
Notes: knife withdrawn from private collection like new, lacks packaging and certificatesCR-SA3-CP -
Laguiole En Aubrac - Le Camembert - Pistachio Wood - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This knife is dedicated to Camembert and is sold in the round wooden box typical of this famous cheese known throughout the world.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Stainless steel 12C27
Country of production: France
Handle: Pistachio wood
Blade length: 80mm.
Blade thickness: 2.6mm.
Length closed: 110mm.
Total length: 193mm.
Weight: 88g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: wooden boxCB-PIST -
Laguiole En Aubrac - Raw Buffalo Horn with Damascus Steel Blade - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless damasci steel
Country of manufacture: France
Handle: raw buffalo horn
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0512CBI/FDBI1 -
Laguiole En Aubrac - Horn point - spring engraved with Maltese cross - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Maltese cross symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Stainless steel 12C27
Blade production: France
Handle: Blond cow horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -LEA-croce-m -
Laguiole En Aubrac - Horn Point - spring engraved with Pilgrim's Shell - VG10 in Sanmai - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Pilgrim's shell symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
The blade uses 67-layer Japanese VG10 rolled steel, manufactured by Takefu Steel.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Damascus and Japanese VG10 rolled steel
Blade production: France
Handle: Blond Cowhorn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -aubrac-conchiglia -
Laguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife
These high quality knives, are handcrafted in the tradition of French Thiers cutlery.
This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.
The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.
The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly.
The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs.
The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.
Intended Use: Regional/Collection/Outdoor/Hunting
Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0514EBI -
Aitor - Ferfal Outdoor knife - N680 steel - 16099 - knife
Intended use: Collection / Outdoor
Blade: Full tang in stainless steel N680 at 57 / 58HRC
Handle: In metal
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 295mm.
Weight: 367g.
Sheath: in polymers and cordura with the following accessories:* Skinner
* Sharpening stone
* survival kit includes:
- Fishing kit
- Sewing kit
- Scalpel
- Seasonings
- Tweezers
Packaging: cardboard with Aitor logosAI-16099 -
Chris Reeve - Inyoni knife - Cocobolo - PRIVATE COLLECTION - collection knife
Rare knife produced by Chris Reeve in 2007 and no longer in production since 2013. Knife from a private collection in like new condition, with original sheath, without original box and certificate. Checked and certified by our internal laboratory.
Intended use: sports / huntingBlade: CPM-S30V 58 / 59HRC stainless steel
Blade treatment: stonewash finish
Handle: Cocobolo wood
Blade length: 88mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 201mm.
Balancing: set back
Weight: 76g.
Closure: -
Clip: -
Sheath: in leather
Notes: inyoni in Zulu means birdAP-INY-CR -
White River Knife & Tool - Small Game knife - Micarta BLack - WRSG - knife
Intended use: Hunting / Sports
Type of production: Artisan
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closure: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -WRS-MBL -
White River Knife & Tool - Small Game knife - Micarta Brown - WRSG - knife
Intended use: Hunting / Sports
Type of production: Artisan
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closure: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -WRS-G-M -
Laguiole En Aubrac - Mandailles knife - Buffalo horn - knife
A handmade Laguiole en Aubrac knife made by a master craftsman from the region of origin of Laguiole. Extremely precise in its manufacture, it is decorated with the shepherd's cross on the handle. This cross allowed those who left during the long months of the transhumance to say their prayers once the knife was stuck in the bread.
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512BUMIF -
Aitor - Jungle King I knife Satin - 16015 - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16015 -
White River Knife & Tool - Small Game knife - Micarta - WRSG - knife
Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives
Intended use: Hunting / Sports
Type of production: Artisan
Blade production: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closing: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -WRSG -
Laguiole - En Aubrac - Trappeur Olive knife - knife
Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.
Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:LEA-T-W -
Laguiole En Aubrac - Camel bone with Japanese SanMai blade - knife
Intended use: Regional / Collection
Type of production: handmade
Blade: Japanese "sanmai" laminated steel with external damask cheeks and VG10 to 61HRC cutting edge
Country of production: France
Handle: Camel bone
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Weight: 104g.
Closure: back retention spring
Clip: absent
Sheath: absentL0512O1H -
Laguiole En Aubrac - Lo Fau in boxwood - regional knife
Intended use: Collection / Sports
Type of production: artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Boxwood
Blade length: 82mm.
Blade thickness: 2.4mm.
Length closed: 111mm.
Total length: 193mm.
Weight: 53g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruiningLFU99WAI -
Laguiole En Aubrac - Laguiole bovine horn tip 12cm - collection knife
Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.
The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".
The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.
The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.
Intended use: Collection / SportsType of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Mirror polished
Handle: Tip of bovine horn
Blade length: 112mm.
Blade thickness: 3mm.
Length closed: 143mm.
Total length: 255mm.
Weight: 80g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruiningL0514BUI-FSI1 -
Laguiole En Aubrac - Fidelis Ebène - regional knife
The "Fidelis" was born from the desire to pay homage to the "medieval Larzac", with its old Templar villages and legends.
It is a knife that symbolizes the roughness of this land, the rusticity of its vegetation and its climate, but also the nobility of women and men who have worked, modeled, guarded and inserted into this object a soul.
Made in Millau, in the heart of Aveyron, in the cutlery workshops "L'ame du Causse", it is worked with noble materials, such as the precious wood of ebony that the Knights Templars have brought back to their return. Its "sage leaf" blade, made of 12C27 steel, renowned for its cutting quality and ease of maintenance, will be a guarantee of longevity. The "Fidelis" will be your ideal companion to share moments of everyday life full of history.Intended use: Regional
Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade treatment: Satin
Handle: Ebony wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Opening: manual, two-handed
Closure: upper safety ring
Packaging: cardboard case
Note: -2996F -
Laguiole - En Aubrac - Trappeur Olive knife - knife
Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.
Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:L0514TOLI -
Chris Reeve - Green Beret 7" Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1003 -
Laguiole en Aubrac - Carbon fiber with SanMai blade - knife
Intended Use: Regional / Collection
Type of production: Hand
Blade: sanmai steel with sharp VG10 burnished and damask cheeks to 32 layers
Production Country: France
Handle: Carbon fiber with aluminum liners
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Weight: 70g.
Closure: retaining spring
Clip: absent
Sheath: absent
Notes: -au-carbon -
Laguiole en Aubrac - Ash Wood with blade sanmai - knife
Intended Use: Regional / Collection
Type of production: Hand
Blade: laminated damask steel and VG10 Japanese
Production Country: France
Handle: wood ash
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Weight: 104g.
Closure: retaining spring
Clip: absent
Sheath: absent
Notes: -12646 -
Chris Reeve - Mk IV 28 Year Commemorative knife
Chris Reeve - Mk IV 28 Year Commemorative knife
For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.
An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)
Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.
To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.
Specifications
Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife ConceptThe idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.
Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.
Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheathCR-MkIV -
Laguiole en Aubrac - Camel Bone with SanMai damascus blade - knife
Intended Use: Regional / Collection
Type of production: Hand
Blade: laminated damascus steel and VG10 Japanese
Production Lama France
Handle: Giraffe bone with pink / purple color
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Weight: 104g.
Closure: retaining spring
Clip: absent
Sheath: absent
Notes: -12552 -
Chris Reeve - Ubejane Skinner - coltello
Raro coltello fuori serie realizzato nel 2009 da Chris Reeve.
Il nome Ubejane significa Rinoceronte nella lingua Zulu in South Africa.
Destinazione d'uso: Collezione/Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio A2 55/57HRC
Trattamento Lama: black
Manicatura: Brown canvas Micarta
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 230mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 312g.
Chiusura: -
Clip: -
Fodero: Cuoio nero
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: coltello fuori produzione dal 2011CR-SKINNER -
Laguiole en Aubrac - Cognet in horn tip - craft knife
Laguiole en Aubrac - Cognet in horn tip - craft knife
Destination: Knife regional French handmade.
This knife is produced by one of the companies aThiers knives oldest in France
Blade: carbon steel.
Handle: horn tip
Blade length: 10 mm.
Blade thickness: 3 mm.
Overall length: 226 mm.
Weight: 54 g.
Folders: Stainless Steel
Head: Stainless Steel
Closing: no lock blade
Clip: None
Sheath: Nonecognet -
Laguiole en Aubrac - Ancestral Hètre - craft knife
Destination: Knife regional French handmade.
This model is considered the forerunner in the design of the famous classic Laguiole
Blade: Stainless swedish 12C27 to 54HRC polished.
Handle: boxwood
Blade length: 95 mm.
Blade thickness: 3 mm.
Overall length: 213 mm.
Weight: 76 g.
Folders: Stainless Steel
Head: Stainless Steel
Clasp: stainless steel retention spring
Clip: None
Sheath: NoneL0512DHI -
Laguiole en Aubrac - Sauveterre horn - craft knife
Laguiole en Aubrac - Sauveterre horn - craft knife
Destination: Knife regional French handcrafted in the city of Sauveterre
Blade: Stainless swedish 12C27 to 54HRC polished.
Handle: stag
Blade length: 90 mm.
Blade thickness: 3 mm.
Overall length: 200 mm.
Weight: 90 g.
Folders: Stainless Steel
Head: Stainless Steel
Clasp: stainless steel retention spring
Clip: None
Sheath: Nonesauveterre-co -
Laguiole en Aubrac - Sauveterre deer - craft knife
Laguiole en Aubrac - Sauveterre deer - craft knife
Destination: Knife regional French handcrafted in the city of Sauveterre
Blade: Stainless swedish 12C27 to 54HRC polished.
Handle: stag
Blade length: 90 mm.
Blade thickness: 3 mm.
Overall length: 200 mm.
Weight: 90 g.
Folders: Stainless Steel
Head: Stainless Steel
Clasp: stainless steel retention spring
Clip: None
Sheath: NoneSauveterre-c -
Laguiole En Aubrac - Horn of Buffalo - knife collection
Laguiole En Aubrac - Horn of Buffalo - knife collection Destination : Knife regional French collector Blade: 12C27 Swedish stainless steel in 54HRC brut de forge. Handle: Buffalo Blade length: 90 mm. Blade Thickness: 2.5 mm . Overall length : 220 mm . Weight: 68 g . Folders : Stainless steel brushed Heads : Absent Closure : Spring retention in satin stainless steel Clip: None Sheath: None
lag-buffle -
Laguiole En Aubrac - olive wood with knife in sanmai Japanese - knife collection
Laguiole En Aubrac - olive wood with knife in sanmai Japanese - knife collection Intended Use : Regional / Collection Type of production : craft Blade: damascus steel and laminated VG10 Japanese Production Lama : France Handle: olive wood Blade length : 100mm . Blade Thickness : 3mm. Closed Length : 120mm . Overall length : 220mm . Balancing : - Weight: 84g . Closure: rear spring retention Clip: - Sheath: - Notes: -
LEA-OL-SM -
Laguiole En Aubrac - Handmade Black Damascus and Blonde Horn - knife collection
Intended Use: Regional / Collection
Type of production: craft
Blade: Black Damascus Handforged
Production Lama: France
Handle material: cow horn tip with central inserts in Black Damascus, double liners in steel and 24k gold.
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 116g.
Closure: rear spring retention
Clip: -
Sheath: -
Note: gift box in leather with logos Laguile en Aubrac - Specimen in limited and numbered edition, serial number # 01L0912PS -
Laguiole En Aubrac - Horn blond with sanmai Japanese blade - knife collection
Laguiole En Aubrac - Horn blond with sanmai Japanese blade - knife collection
Intended Use: Regional / Collection
Type of production: craft
Blade: damascus steel and laminated VG10 Japanese
Production Lama: France
Handle: Horn blond
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 91g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -L0212PCI -
Laguiole En Aubrac - Buffalo horn with sanmai Japanese blade - knife collection
Laguiole En Aubrac - Buffalo horn with sanmai Japanese blade - knife collection
Intended Use: Regional / Collection
Type of production: craft
Blade: damascus steel and laminated VG10 Japanese
Production Lama: France
Handle: Buffalo Horn
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 90g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -L0212BUI -
Laguiole en Aubrac - Bone with double blosters carbon - knife collection
Laguiole en Aubrac - Bone with double blosters carbon - knife collection
Intended Use: Regional / Collection
Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: double blosters bone with carbon black and white
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 74g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -L0212BUEF -
Laguiole en Aubrac - Bone with double bolsters carbon - knife collection
Laguiole en Aubrac - Bone with double bolsters carbon - knife collection
Intended Use: Regional / Collection
Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: double blosters bone with carbon black and white
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 74g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -L0212OSGF -
En Aubrac Laguiole - Laguiole d'autrefois in horn tip - knife collection
En Aubrac Laguiole - Laguiole d'autrefois in horn tip - knife collection
Intended use: Collection / Sports
Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle Blonde
Blade length: 112mm.
Blade Thickness: 3mm.
Closed Length: 143mm.
Overall length: 255mm.
Balancing: -
Weight: 80g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole en AubracL0214CPIF -
Laguiole en Aubrac - Double Head - Ebony Wood - knife collection
Laguiole en Aubrac - Double Head - Ebony Wood - knife collection
Intended Use: Regional / Collection
Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: ebony
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 110g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -aubrac-ebano -
Laguiole en Aubrac - Centre of Horn spring engraved with the Maltese Cross with blade sanmai - knife
Laguiole en Aubrac - Centre of Horn spring engraved with the Maltese Cross with blade sanmai - knife
Intended Use: Regional / Collection
Type of production: crafts
Blade: rolled steel damask and Japanese VG10
Production Lama France
Handle: Horn Cattle Blonde
Blade length: 100mm.
Blade Thickness: 3mm.
Length closed: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 104g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -aubrac-croce -
Laguiole En Aubrac - Horn Classic 11 cm - Knife
Laguiole En Aubrac - Horn Classic 11 cm - Knife
Intended use: Collection / Sports
Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle
Blade length: 105mm.
Blade Thickness: 3mm.
Closed Length: 130mm.
Total length: 240mm.
Balance: -
Weight: 106g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac10279 -
Laguiole En Aubrac - Horn Classic - knife
Laguiole En Aubrac - Horn Classic - knife
Intended use: Collection / Sports
Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle
Blade length: 90mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Total length: 200mm.
Balance: -
Weight: 72g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En AubracL0212PCI-1 -
Laguiole En Aubrac - Lily inlaid - ebony - knife
Laguiole En Aubrac - Lily inlaid - ebony - knife
Intended use: Collection / Sports
Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle Blonde
Blade length: 100mm.
Blade Thickness: 3mm.
Thickness of handle: 33mm.
Length closed: 118mm.
Total length: 217mm.
Balance: -
Weight: 98g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac10471 -
Laguiole En Aubrac - Myctic Horn Blonde - knife
Laguiole En Aubrac - Myctic Horn Blonde - knife
Intended use: Collection / Sports
Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle Blonde
Blade length: 100mm.
Blade Thickness: 3mm.
Length closed: 118mm.
Total length: 217mm.
Balance: -
Weight: 64g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac10467 -
Laguiole En Aubrac - Buffalo and blade Brut de forge knife - lily spring - knife
Laguiole En Aubrac - Buffalo Brut de forge and knife - knife
Destination: Knife regional French collector
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: Buffalo
Blade length: 90 mm.
Blade Thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless steel satin
Heads: Absent
Closure: Spring retention in satin stainless steel
Clip: None
Sheath: None10472 -
Aitor - One Black Tactical Knife - 16131 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: teflonatura
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 145mm.
Spessore della lama: 5mm.
Lunghezza totale: 270mm.
Bilanciatura: 1 cm arretrata dal ramo di guardia
Peso: 346g.
Fodero: tattico in cordura con attacco orizzontale e verticale e sgancio rapido4252B -
Chris Reeve - Inyoni coltello
Novità 2007 direttamente dallo Shot Show di Orlando, Florida
Destinazione d'uso: sportivo/caccia
Lama: in acciaio inox CPM-S30V 58/59HRC
Trattamento Lama: stonewash finish
Manicatura: Legno di cocobolo
Lunghezza lama: 88mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 201mm.
Bilanciatura: arretrata
Peso: 76g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: inyoni in zulu significa uccello0022 -
Chris Reeve - Neil Roberts 6 "knife - knife
The Collini Cutlery is official distributor for Italy of the tactical knives / collection made in USA Chris Reeve
Intended use: Fighter / Tactical
Type of production: Artisan
Blade: stainless steel CPM-S35VN 55 / 57HRC
Lama production: USA
Handle: Black Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Length closed: -
Total length: 290mm.
Balancing: set back to 1cm. from the lower guard branch
Weight: 356g.
Closure: -
Clip: -
Sheath: by SpecOps, in cordura
Notes: single-piece knife from 2007 - production ranksCR0014 -
Chris Reeve - Ti-Lock Stone Washed - design by Grant and Gavin Hawk knife
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so we can offer greater design freedom. Fully ambidextrous, the Ti-Lock does not want to be a mere exercise in style, but must be understood as an innovation and mechanics as a solid and reliable evidence of the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sport / Collection
Type of production: Semi-Craft
Production Lama USA
Blade: stainless steel CPM-S35VN 58/59HRC
Treatment Blade: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Closed Length: 100mm.
Total length: 182.5mm.
Thick when closed: -
Balance: -
Weight: 85g.
Closure: Ti-Lock Titanium 6AI4V
Clip: Titanium 6AI4V
Sheath: -
Packaging: Cardboard box with logos Chris Reeve
Notes: Design by Grant and Gavin Hawk0037SW -
Laguiole - En Aubrac - Hunter knife - coltello
Questi coltelli di alta qualità, sono realizzati artigianalmente secondo la tradizione della coltelleria francese di Thiers che assicura l'assenza di qualsiasi difetto di fabbricazione nell'ambito di un normale utilizzo.
Lama: Acciaio Inox svedese 12C27 a 54HRC satinato.
Manicatura: in corno
Lunghezza lama: 110 mm.
Spessore della lama: 3.5 mm.
Lunghezza totale: 245 mm.
Peso: 186 g.
Chiusura: molla
Fodero: -
Note:2875