Last up date

Andis - 9.5 mm 4FC Animal Head - 64123

Andis Ultraedge blades have been a favorite of professional groomers for years. These durable blades are designed to cut through hair with ease, making grooming easier. These excellent blades are manufactured under Andis' strict quality control.

They are made of carbonized steel for long life, the chrome finish resists rust, and they snap on.

Fits Andis detachable-blade clippers models: AG, AGC, AGP, AGRC, AGCL, AGR+, AGRV, MBG, SMC
Suitable for Oster A5 and Wahl KM series.

Andis - Animal Head 4 9.5 mm

Andis Ultraedge blades have been a favourite among professional groomers for years. These durable blades are designed to cut hair with ease, making grooming easier. These excellent blades are manufactured in accordance with Andis' strict quality control.

They are made of carbonised steel for long life, the chrome finish resists rust, and they snap on.

Suitable for Andis clippers with detachable blade: AG, AGC, AGP, AGRC, AGCL, AGR+, AGRV, MBG, SMC
Suitable for Oster A5 and Wahl KM series.

Key Features

• Highly efficient and durable Li-lon-batteries without memory effect.
• Closed back of the blade set optimizes fur guidance and eases cleaning.
• Automatic speed control for constant cutting power
• Ergonomic design

Type: Professional Cordless Trimmer

Drive unit: DC Motor, ~ 5.500 rpm

Operation time: Up to 120 min

Blade Set: Art. 1584-7020, Star Blade

Cutting length: 0.4 mm

Cutting width: 32 mm

Charging time: 60 min.

Operating voltage: 100-240 V Weight 120 g

CORDLESS DETAILER LI

The barber’s favorite trimmer has gone cordless!

This professional quality USA-made unit is for everyday use in the busy barbershop or salon. The cordless Detailer Li comes equipped with an extremely close cutting t-wide blade designed for detailing and fine line trimming, a lithium ion battery with 100-minute run time, and a heavy duty recharging stand with a unique swivel cord rotation feature.

Extremely close trimming creates a crisp, clean line

Extended blade cutting area produces faster cutting results

Facial hair detailing and design

LED Indicator Solid:

Full Charge Flashing:

Low Charge Pulse:

Charging Space saving recharge stand has cord rotation

feature Lithium-Ion Battery 100 minute run time

Runs cord/cordless

Ergonomic design fits comfortably in your hand for easy maneuverability

Bottom housing "grips" allow a secure hold.

Accessories :

3 trimming guides (1/16" - 3/16"),

recharging transformer,

recharging stand,

pre-shave brush,

oil,

cleaning brush,

operating instructions & red blade guard.

Battery Lithium-Ion

Blade 2215 Adjustable T-Wide Blade

Cord Cord/Cordless

Transformer Motor Rotary Unit

Length 5.75" Unit

Weight 6.6 oz

Voltage & Hertz 120V- 60Hz

Testa di taglio professionale, intercambiabile, in acciaio inox riaffilabile, per tosa animali, compatibile con le tosatrici Aesculap Favorita II e Elektra II Turbo Line ad unica testina con perno regolabile. 



Larghezza pettine di taglio: 3 mm.
Impiego: Professionale - Tolettatore

Wahl - Replacement Cutting Head For 5 STAR MAGIC CLIP, SENIOR CORDLESS - 0.8mm - 2.5mm

The set includes two screws, a cutting head and a base.

Wahl - Clippers Professional - Legend 5 Star Series - clipper Hair clippers

Power 9W.

POWER: Powerful and robust network for use in hair-cutting continuous.

PROFESSIONAL: Motor armature oscillating V9000 very durable, durable and powerful.

5 STAR WEDGE BLADE: Precision pumphead chrome with longer teeth and a new geometry for cutting softer and effects naturali.Presa of the hair for an improved work faster.

Large cutting width of 0.5 to 2.9 mm for a greater comfort cutting and maximum flexibility.

INCLUDED : 8 premium hikes sturdy and practical.

Professional cable of 4 meters for maximum freedom of movement.

Drive - Engine professional armature oscillating V9000, 6,000 rev / min.

Operating time network - Continuous operation

Cutting head - Fixed screw, Chrome Blade with side lever

Cutting length - from 0.5 to 2.9 mm

Accessories in the package: 8 premium increases # ½ (1½ mm), # 1 (3 mm), # 1- (4½ mm), # 2 (6 mm), # 3 (10 mm), # 4 (13 mm), # 6 (19 mm), # 8 (25 mm), comb professional, brush, oil, blade guard.

Wahl - Professional hair clipper - Magic Clip 5 Star Series - hair clipper

Corded hair clipper. Single speed. 10W power. The best clipper for precise shading and transitions. V5000 motor and special Fade head with fine and sharper teeth. The combination of different elevations and integrated cutting length adjustment ensures perfect FADE nuances. For all textures and hair types. Features Ideal for flush cuts and smooth transitions directly from the scalp.

Cutting length 0.5 - 1.2 mm with "ZERO" setting.

With 8(eight) plastic risers of 1.5 - 3 - 4.5 - 6 - 10 - 13 - 19 - 25 mm.

Powerful and robust wire clipper, ideal for continuous use.

Durable and long-lasting vibrating V motor. Designed in the USA specifically for extra short cuts and nuances at Zero Lift Precision Chrome plated blade.

Made in USA. Ideal for cutting to zero.

Guaranteed inspection by our in-house service and regrinding laboratory. We recommend constant lubrication using the oil provided in the pack, applied to the blades after each use. Made in Hungary.

Professional, interchangeable, resharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pivot.

SHORT TEETH.

Cutting comb width: 42 mm.

Use: Professional - Groomer

Professional, interchangeable, resharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin.

Cutting comb width: 42 mm.

Use: Professional - Groomer

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 2.8 mm.
Cutting width: 43 mm. about
Teeth pitch: 1.8 mm. about

Moser cutting heads are universal and designed for both clippers and shearers. This head is therefore suitable for both humans and dogs and cats.

Professional, interchangeable, resharpenable stainless steel cutting head for Moser 1225, 1245,1247,1250,1260, 1261, 1262 and 1290 animal clippers also compatible with almost all brand-name clippers that support quick-release heads (such as Wahl and Ermilia).

Cutting length: 2.5 mm.

Cutting comb width: 43 mm.

Tooth pitch: 2.4 mm.

Use: Ears (Schnauzers, Terriers) - Muzzles (Poodles)

Professional, interchangeable, re-sharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin. 

Cutting comb width: 45 mm.
Use: Professional - Groomer

Professional, interchangeable, resharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin. 

Cutting comb width: 42 mm.
Tooth pitch: approximately 2 mm.
Use: For shaving - Professional - Surgical (veterinary) use.

Professional, interchangeable, re-sharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin. 

Cutting comb width: 42 mm.
Use: For shaving - Professional - Surgical (veterinary) use.

Professional, interchangeable, re-sharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin. 

Cutting comb width: 42 mm.
Use: For shaving - Professional - Surgical (veterinary) use.

Professional, interchangeable, resharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin.

Cutting comb width: 42 mm.
Use: For shaving - Professional - Surgical (veterinary) use.

Professional, interchangeable, re-sharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin. 

Cutting comb width: 42 mm.
Use: For shaving - Professional - Surgical (veterinary) use.

Professional, interchangeable, resharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin. 

Cutting comb width: 19 mm.
Use: For shaving/refinishing - Professional - Surgical (veterinary) use.

- 36 mm precision T-blade made of chrome-plated carbon steel
- Deeper shave and high-precision cut of 0.3 mm
- Battery or mains powered
- Very quiet, minimal vibration
- Perfect balance between sharpness and cutting reliability
Specifications:

Speed:5'500 dbs/min
Dimensions:144 x 30 x 35 mm
Weight including battery: 121 g
Charging time: 60 to 75 minutes

Autonomy: 80 minutes

Supply: charging station, oil dispenser, allen wrench, cleaning brush

Moser cutting heads are universal and designed for both clippers and shearers. This head is therefore suitable for both humans and dogs and cats

Professional, interchangeable, resharpenable stainless steel cutting head for Moser 1225, 1245,1247,1250,1260, 1261, 1262 and 1290 animal clippers also compatible with almost all brand-name clippers that support quick-release heads (such as Wahl and Ermilia)

Cutting length: 1 mm.
Cutting comb width: 41 mm.
Tooth pitch: 1.6 mm.
Use: Surgical use - Paws (all breeds)

Moser cutting heads are universal and designed for both clippers and shearers. This head is therefore suitable for both humans and dogs and cats

Professional, interchangeable, resharpenable stainless steel cutting head for Moser 1225, 1245,1247,1250,1260, 1261, 1262 and 1290 animal clippers also compatible with almost all brand-name clippers that support quick-release heads (such as Wahl and Ermilia)

Cutting length: 3 mm.
Cutting comb width: 43 mm.
Tooth pitch: 2.4 mm.
Use: Cheeks (Schnauzers, Terriers) - Muzzle (Poodles) - Underbelly (All breeds, Horses, Cattle)

Original replacement cutting head for Moser Rex 1230 clipper.

Set includes two screws, a cutting head and a baseboard.

Professional, interchangeable, re-sharpenable stainless steel cutting head for Moser 1225, 1245, 1247 and 1290 animal clippers also compatible with almost all brand-name clippers that support quick-release heads (such as Wahl and Ermilia)

Cutting height: 2.3 mm.
Cutting comb width: 66 mm.
Tooth pitch: 2 mm.
Use: animals

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 1.6 mm.
Cutting width: 43 mm. about
Teeth pitch: 1.4 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 1.2 mm.
Cutting width: 39.5 mm. about
Teeth pitch: 0.7 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 0.5 mm.
Cutting width: 42 mm. about
Teeth pitch: 1.2 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 0.25 mm.
Cutting width: 39.5 mm. about
Teeth pitch: 0.7 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 0.8 mm.
Cutting width: 19 mm. about
Teeth pitch: 1.2 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 0.02 mm.
Cutting width: 39.5 mm. about
Teeth pitch: 0.7 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 3.2 mm.
Cutting width: 41 mm. about
Teeth pitch: 4 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 0.8mm.
Cutting width: 19 mm. about
Teeth pitch: 1.2 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 3.2 mm.
Cutting width: 41 mm. about
Teeth pitch: 1.8 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 2.0mm.
Cutting width: 43 mm. about
Teeth pitch: 1.4 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing with Oster 616 and Isis

Cutting height: 0.10 mm.