Last up date
-
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP -
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY -
Guardian Tactical Usa - Deltrix Tactical Folder knife - PRIVATE COLLECTION - CF DK - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to 2015
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: original, in cardboard with Guardian Tactical logos
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratory100% USA Guardian Tactical, an American company specializing in the design and manufacture of tactical knives. Guardian Tactical combines obsessive and partly artisan attention with the use of modern and technologically advanced machinery in order to obtain almost perfect products with extremely high quality performance.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: CPM-154CM stainless steel
Blade treatment: Dark StoneWash
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 225mm.
Thick when closed: 18mm
Balancing: -
Weight: 162g.
Closure: Frame Lock
Clip: removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Guardian Tactical logos
Design: -AP-DeltrixDK -
Guardian Tactical Usa - Helix Tactical Folder G10 OD Green - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-154CM
Treatment Lama: Stone Washed
Handle: G10 OD Green
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 135mm.
Overall length: 225mm.
Thick when closed: 18mm
Balancing: -
Weight: 170g.
Closure: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Guardian Tactical
Design: -GT-33211 -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB -
Guardian Tactical - Conix - G10 Blackwashed - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Blackwashed
Handle: G10 and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0006 serial number imprinted on the clipGT-81611 -
Guardian Tactical - Conix - G10 Stonewashed - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Stone Washed
Handle: G10 and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0019 serial number imprinted on the clipGT-81511 -
Guardian Tactical - Conix - Carbon Fiber Stonewashed - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Stone Washed
Handle: Carbon Fiber and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0027 serial number imprinted on the clipGT-82511 -
Guardian Tactical - Conix - Carbon Fiber Two Tone - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Dual Tone - Stone Washed + PVD
Handle: Carbon Fiber and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0024 serial number imprinted on the clipGT-82211 -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2 -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK -
Guardian Tactical Usa - Deltrix Nano - Carbon Fiber Two Tone Black - 72211 - Knife
Guardian Tactical Use 100%, is a young American company specializing in the design and implementation of tactical knives. Guardian Tactical combines an obsessive and partly crafted with the use of modern and technologically advanced machinery in order to achieve almost perfect products and with very high quality performance.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: CPM-154CM stainless steel
Blade treatment: Two Tone Black
Handle: Carbon Fiber
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: 135mm.
Overall length: 192mm.
Thick when closed: 14mm
Weight: 104g.
Lock: Frame Lock
Clip: removable, stainless steel
Packaging: Cardboard box with Guardian Tactical logos
Notes: Specimen with consecutive numbering and date of manufacture stamped on the blade and clips72211 -
Guardian Tactical Use - Helix Nano Dark Stonewash - knives
Intended use: Tactical / Collection
Type of production: Industrial
blade production: U.S.A.
Blade: CPM-154CM stainless steel
Blade treatment: Dark Stonewash
Handle: carbon fiber
Blade length: 75mm.
Blade thickness: 4mm.
Closed Length: 115mm.
Overall length: 190mm.
Thick when closed: 15mm
Balancing: -
Weight: 102g.
Lock: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with Guardian Tactical logos
Design: -62511 -
Guardian Tactical Use - Helix Nano Dark Stonewash Tanto - knives
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: U.S.A.
Blade: CPM-154CM stainless steel
Blade treatment: Dark Stonewash
Handle: carbon fiber
Blade length: 75mm.
Blade thickness: 4mm.
Closed Length: 115mm.
Overall length: 190mm.
Thick when closed: 15mm
Balancing: -
Weight: 102g.
Lock: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with Guardian Tactical logos
Design: -62621 -
Guardian Tactical Use - Deltrix Nano - Carbon Fiber Dark Stonewash - 72611 - Knife
Guardian Tactical Use 100%, is a young American company specializing in the design and implementation of tactical knives. Guardian Tactical combines an obsessive and partly crafted with the use of modern and technologically advanced machinery in order to achieve almost perfect products and with very high quality performance.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: CPM-154CM stainless steel
Blade treatment: Dark Stonewash
Handle: Carbon Fiber
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: 135mm.
Overall length: 192mm.
Thick when closed: 14mm
Weight: 104g.
Lock: Frame Lock
Clip: removable, stainless steel
Packaging: Cardboard box with Guardian Tactical logos
Notes: Specimen with consecutive numbering and date of manufacture stamped on the blade and clips72611 -
Guardian Tactical Use - Helix Nano Two Tone Satin Black - knife
Intended use: Tactical / Collection
Type of production: Industrial
blade production: U.S.A.
Blade: CPM-154CM stainless steel
Blade treatment: satin finish
Handle: Aluminum Black
Blade length: 75mm.
Blade thickness: 4mm.
Closed Length: 115mm.
Overall length: 190mm.
Thick when closed: 15mm
Balancing: -
Weight: 128g.
Lock: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with Guardian Tactical logos
Design: -63411B -
Guardian Tactical Use - Helix Nano Two Tone Satin Blue - knife
Intended use: Tactical / Collection
Type of production: Industrial
blade production: U.S.A.
Blade: CPM-154CM stainless steel
Blade treatment: satin finish
Handle: Aluminium Blue
Blade length: 75mm.
Blade thickness: 4mm.
Closed Length: 115mm.
Overall length: 190mm.
Thick when closed: 15mm
Balancing: -
Weight: 128g.
Lock: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with Guardian Tactical logos
Design: -63411BL -
Guardian Tactical Use - Helix Nano Two Tone Satin Orange - Knife
Intended use: Tactical / Collection
Type of production: Industrial
blade production: U.S.A.
Blade: CPM-154CM stainless steel
Blade treatment: satin finish
Handle: Aluminium Orange
Blade length: 75mm.
Blade thickness: 4mm.
Closed Length: 115mm.
Overall length: 190mm.
Thick when closed: 15mm
Balancing: -
Weight: 128g.
Lock: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with Guardian Tactical logos
Design: -63411O -
Guardian Tactical Usa - Helix Nano Dark Stonewash G10 OD Green - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: CPM-154CM stainless steel
Blade treatment: Dark Stonewash
Handle: G10 OD Green
Blade length: 75mm.
Blade thickness: 4mm.
Closed Length: 115mm.
Overall length: 190mm.
Thick when closed: 15mm
Balancing: -
Weight: 106g.
Lock: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with Guardian Tactical logos
Design: -68611 -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB -
Guardian Tactical Usa - Helix Tactical Folder G10 OD Green - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-154CM
Treatment Lama: Stone Washed
Handle: G10 OD Green
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 135mm.
Overall length: 225mm.
Thick when closed: 18mm
Balancing: -
Weight: 170g.
Closure: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Guardian Tactical
Design: -12412 -
Guardian Tactical Usa - Deltrix Tactical Folder Carbon Fiber DS - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-154CM
Treatment Lama: Dark stonewash
Handle: Carbon fiber
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 135mm.
Overall length: 225mm.
Thick when closed: 18mm
Balancing: -
Weight: 162g.
Closure: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Guardian Tactical
Design: -DeltrixDS -
Guardian Tactical Usa - Deltrix Tactical Folder Carbon Fiber TT - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-154CM
Treatment Lama: Stone Washed and Black
Handle: Carbon fiber
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 135mm.
Overall length: 225mm.
Thick when closed: 18mm
Balancing: -
Weight: 162g.
Closure: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Guardian Tactical
Design: -DeltrixTT -
Guardian Tactical Usa - Exilis Mini Flipper Folder Black Tactical - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-154CM
Treatment Lama: Black
Handle: aluminum
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 102mm.
Overall length: 172mm.
Thick when closed: 13mm
Balancing: -
Weight: 96g.
Lock: Liner Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Guardian Tactical
Design: -ExilisBT -
Guardian Tactical Usa - Exilis Mini Flipper Folder Two Tone - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-154CM
Treatment Lama: Stone Washed and Black
Handle: aluminum
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 102mm.
Overall length: 172mm.
Thick when closed: 13mm
Balancing: -
Weight: 96g.
Lock: Liner Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Guardian Tactical
Design: -ExilisTT -
Guardian Tactical Usa - Helix G10 Desert Tan Tactical Folder - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-154CM
Treatment Lama: Stone Washed
Handle: G10 Tan
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 135mm.
Overall length: 225mm.
Thick when closed: 18mm
Balancing: -
Weight: 170g.
Closure: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Guardian Tactical
Design: -HelixDT -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB