Last up date
-
Fantastic Animals and Where to Find Them - Albus Dumbledore Magic Wand - Collector Box NN9906
An authentic reproduction of Albus Dumbledore's Magic Wand used in the movie "Fantastic Beasts Wands"
It is made of resin and has a length of 36 cm.
Comes with a cardboard box and Olivander velvet.It is an officially licensed product Warner Bros Entertainment Inc.
Fantastic Beasts (Fantastic Beasts) is a fantasy film series directed by David Yates, written by JK Rowling and produced by Warner Bros. Started in 2016 with Fantastic Animals and where to find them and continued in 2018 with Fantastic Animals - Grindelwald Crimes, will be composed from five films [1].
It is a spin-off of Harry Potter inspired by the depth manual Fantastic Beasts and Where to Find Them, both written by Rowling. The series is set in the Magic World, a universe shared with Harry Potter, but some sixty years earlier in the internal chronology, in a period of time ranging from 1926 to 1945. The plot follows the magizoologist Newt Scamander in his adventures around for the world in search of magical creatures and in his efforts to thwart the dark wizard Gellert Grindelwald.NN9906 -
Harry Potter - Magic Wands Dark Wizard Wand Collection NN7351
The set includes a wall display in the shape of the Black Mark and 5 sticks, the baton of Voldemort and the 4 of the Death Eaters:
The display measures 43 cm high and 16.5 cm wide. The sticks measure about 38 cm in length.It is an officially licensed product Warner Bros Entertainment Inc.
NN7351 -
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP -
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY -
Fantastic Beasts and Where to Find Them - Magic Wanders Set with Exhibitor - NN5068 - Harry Potter
Authentic Official Reproductions of the 5 Magic Chopsticks Used in Fantastic Fantasy Movies and Where To Find Them
Made of hand-painted polyvinyl resin, they have a length of 35.5 / 38 cm. And are equipped with a wall display with MACUSA metal coat.
It is a Noble Collection product, licensed by Warner Bros. Entertainment Inc.
NN5068 -
Fantastic Beasts and Where to Find Them - Porpentina Goldstein Magic Wand - NN5624 - Harry Potter
Authentic Official Reproduction of the Portable Magic Wand of Goldstein used in Fantastic Animals and Where To Find Them
Made of hand-painted polyvinyl resin, it has a length of 35.5 cm and is equipped with a Collector Box.
It is a Noble Collection product, licensed by Warner Bros. Entertainment Inc.
NN5624 -
Fantastic Beasts and Where to Find Them - Seraphina Picquery Magic Wand - NN5630 - Harry Potter
Authentic Official Reproduction of the Portable Magic Wand of Seraphina Picquery used in Fantastic Animals and Where To Find Them
Made of hand-painted polyvinyl resin, it has a length of 35.5 cm and is equipped with a Collector Box.
It is a Noble Collection product, licensed by Warner Bros. Entertainment Inc.
NN5630 -
Fantastic Beasts and Where to Find Them - Percival Graves Magic Wand - NN5628 - Harry Potter
Authentic Official Reproduction of the Portable Magic Wand of Percival Graves used in Fantastic Animals and Where To Find Them
Made of hand-painted polyvinyl resin, it has a length of 35.5 cm and is equipped with a Collector Box.
It is a Noble Collection product, licensed by Warner Bros. Entertainment Inc.
NN5628 -
Fantastic Beasts and Where to Find Them - Queenie Goldstein Magic Wand - NN5626 - Harry Potter
Authentic Official Reproduction of the Portable Magic Wand of Queenie Goldstein used in Fantastic Animals and Where To Find Them
Made of hand-painted polyvinyl resin, it has a length of 35.5 cm and is equipped with a Collector Box.
It is a Noble Collection product, licensed by Warner Bros. Entertainment Inc.
NN5626 -
Harry Potter - House Crest Bookmarks Collection - NN8725
Set of five bookmarks - made of metal, plastic and cardboard - representing the four houses of magic and Hogwarts School. Content in an elegant box of gift / collection.
Dimensions: 17.5 x 3.5 cm.
It 'a product officially licensed Warner Bros. Entertainment Inc.
NN8725 -
Harry Potter - Gryffindor Hat Yellow / Red - Cinereplicas
Harry Potter - Gryffindor Hat Yellow / Red - Cinereplicas
Reproduction official gloves and hat of the house of Gryffindor (Harry Potter, Hermione Granger, Ron Weasley and other students)
On the hat is sewn the heraldic logo of Gryffindor House.
HAT HAT WINTER
one size fits all "elastic" adapted from 8/10 years and up
100% acrylic
HP-CA -
Harry Potter - Gryffindor Gloves Yellow / Red - Cinereplicas
Harry Potter - Gryffindor Gloves Yellow / Red - Cinereplicas
Reproduction official glove of the house of Gryffindor (Harry Potter, Hermione Granger, Ron Weasley and other students)
On the gloves is sewn the heraldic logo of Gryffindor House.
PAIR OF GLOVES
100% acrylic "ultra soft" with 2 ends' special conductive fabric for use with any TOUCH SCREEN!
HP-GL -
Harry Potter - Gryffindor Hat + Gloves Yellow / Red - Cinereplicas
Harry Potter - Gryffindor Hat + Gloves Yellow / Red - Cinereplicas
Reproduction official gloves and hat of the house of Gryffindor (Harry Potter, Hermione Granger, Ron Weasley and other students)
On the gloves and on the hat is sewn the heraldic logo of Gryffindor House.
PAIR OF GLOVES
100% acrylic "ultra soft" with 2 ends' special conductive fabric for use with any TOUCH SCREEN!
HAT HAT WINTER
one size fits all "elastic" adapted from 8/10 years and up
100% acrylic
HP-GLCA -
Harry Potter - Ron Magic Wand with Ollivander's Box - NN7462
Harry Potter - Ron Magic Wand with Ollivander's Box
An authentic reproduction of the Magic Wand Ron Weasley used in the film series, "Harry Potter ™"
It 'made of resin and has a length of 36 cm. Comes with original box Ollivander.
It 'an officially licensed product with Warner Bros Entertainment Inc.
NN7462 -
Harry Potter - Bacchetta Magica di Dean Thomas NN8236
Un'autentica riproduzione della Bacchetta Magica di Dean Thomas utilizzata nel film "Harry Potter ed il Deathly Hallows™"
E' realizzata in resina ed ha una lunghezza di 36 cm.
Viene fornito con la scatola
E' un prodotto con licenza ufficiale Warner Bros Entertainment Inc.
Dean Thomas appartiene alla casa del Grifondoro fin dal primo anno quando il cappello parlante lo ha assegnato a quella casa. Compare in tutti i libri anche se in nessuno ne troviamo una descrizione dettagliata: si sa solo che tifa per il West Ham Utd, ha i capelli ricci ed è un ragazzo di colore alquanto magro.
Condivide il dormitorio con Ron Weasley, Seamus Finnigan, Neville Paciock e Harry Potter.
Nei primi giorni a Hogwarts fa amicizia con Harry, ma col tempo la sua amicizia passerà in secondo piano, ed egli legherà soprattutto con l'altro compagno di dormitorio, Seamus Finnigan, che diventerà il suo migliore amico.
Molte delle sue idee tuttavia coincidono con quelle di Harry, per esempio anche lui pensa che il Remus Lupin è stato il miglior professore di Hogwarts.NN826 -
Harry Potter - Bacchetta Magica di Katie Bell NN8274
Un'autentica riproduzione della Bacchetta Magica di Katie Bell utilizzata nel film "Harry Potter ed il Deathly Hallows™"
E' realizzata in resina ed ha una lunghezza di 36 cm.
Viene fornito con la scatola
Katie Bell (nata nel 1979, si diploma nel 1997) è una cacciatrice fenomenale nella squadra del Grifondoro, amica dei gemelli Fred e George Weasley, è stata spesso fondamentale nella coppa del Quidditch e ha partecipato alla società di difesa contro le arti oscure in Harry Potter e l'ordine della fenice la quale era una associazione segreta che prende il nome di Esercito di Silente.
Nel sesto libro Madama Rosmerta, sulla quale Draco Malfoy aveva scagliato la maledizione Imperius,
scaglia di nascosto la medesima maledizione su Katie e le consegna una collana maledetta comprata da Magie Sinister, poi si saprà che era destinata a Silente, ma nel tragitto verso Hogwarts Katie viene in contatto con la collana, e dovrà passare molto tempo al San Mungo gravemente ferita dall'oggetto maledetto.NN8274 -
Harry Potter - Bacchetta Magica di Madama Poppy Chips (Pomfrey) NN8278
Un'autentica riproduzione della Bacchetta Magica di Poppy Chips (Pomfrey) utilizzata nel film "Harry Potter ed il Deathly Hallows™"
E' realizzata in resina ed ha una lunghezza di 36 cm.
Viene fornito con la scatola
Madama Chips è l'infermiera della scuola di magia e stregoneria di Hogwarts.
Attiva e piuttosto inquieta, prende molto sul serio il suo lavoro ma, ogni tanto, lascia trasparire affettuosità, gentilezza e simpatia.
Nel corso della saga la vediamo prendersi più volte cura dei malanni di Harry Potter: almeno una volta, in ogni libro, il ragazzo finisce in infermeria.8673 -
Harry Potter - Bacchetta Magica di Ron Weasley NN8413
Un'autentica riproduzione della Bacchetta Magica di Ron Weasly utilizzata nel film "Harry Potter e il prigioniero di Azkaban™"
E' realizzata in resina ed ha una lunghezza di 36 cm.
Viene fornito con la scatola originale utilizzata nel film "Harry Potter e la pietra filosofale"
E' un prodotto con licenza ufficiale Warner Bros Entertainment Inc.
Ronald Bilius Weasley (Bilius deriva da uno zio paterno morto ventiquattr'ore dopo aver visto un gramo), abbreviato in Ron, è un personaggio della serie di romanzi di Harry Potter, scritta da Joanne Kathleen Rowling. Ron è il sesto di sette figli della famiglia Weasley, nato il 01/03/80, ed è il migliore amico di Harry. Insieme a Hermione è tra i principali protagonisti della saga. Ron è alto, magro e, come tutti i Weasley, ha i capelli rossi e molte lentiggini sul viso. Ha gli occhi azzurri. A Hogwarts non è uno studente modello.NN8413 -
Harry Potter - Bacchetta Magica di Severus Piton con scatola di Olivander NN7150
Un'autentica riproduzione della Bacchetta Magica del Professor Snape"
E' realizzata in resina ed ha una lunghezza di 36 cm.
Viene fornito con la scatola originale utilizzata nel film "Harry Potter e il Calice di Fuoco"
E' un prodotto con licenza ufficiale Warner Bros Entertainment Inc.
Severus Piton è il professore di "pozioni" alla scuola di magia e stregoneria di Hogwarts. Da sempre ambisce senza risultato alla cattedra di "Difesa contro le Arti Oscure".Viene descritto come un uomo alto e magro con i capelli unti e la pelle pallida.
A quanto sembra, la sua infanzia non fu delle migliori. Alcune scene del passato di Piton intraviste da Harry durante una lezione di Occlumanzia lo mostrano in lacrime durante una lite furiosa tra il padre e la madre. Allo stesso modo, durante l'adolescenza Piton non destava le simpatie di molti studenti, poiché era appassionato fin da giovane delle arti oscure (magia nera), e guardava con disprezzo i maghi che non appartenevano a famiglie di maghi purosangue, cioè ai "mezzosangue". In realtà, in "Harry Potter e il Principe Mezzosangue" scopriamo che lui stesso è un mezzosangue, essendo figlio di una strega (Eileen Prince) e di un babbano (Tobias Piton - Tobias Snape nella versione originale).Sappiamo poi che si unì a Voldemort e diventò un mangiamorte, poi passò dalla parte di Silente in quanto credeva morto Voldemort. Alcuni pensano che segretamente sia rimasto adepto di Voldemort e che sia una spia all'interno dell'Ordine della Fenice, mentre altri ritengono che Piton abbia provato realmente rimorso per aver riferito a Voldemort parte della profezia pronunciata di fronte a Silente da Sibilla Cooman al locale chiamato Testa di Porco, che poi portò all'uccisione di Lily Evans e James Potter e che per questo abbia abbandonato Voldemort. Si pensa, inoltre, che il senso di colpa derivi dal fatto che avesse avuto una cotta per Lily, che lo difendeva sempre dalle prese in giro degli altri.NN7150 -
Harry Potter - Death Eaters (Skull) Magic Wand - NN8221
An authentic reproduction of the Magic Wand used by Skull in the movie "Harry Potter and the Deathly Hallows™"
It is made of resin and has a length of 36 cm.
It comes with the box
It is a product licensed by Warner Bros. Entertainment Inc.
The Death Eaters was the name given to followers of Lord Voldemort. The group primarily consisted of wizards and witches who were radical pure blood supremacists, who practised the Dark Arts with reckless abandon and without regard to or fear of wizarding law.
Lord Voldemort used this select group of wizards and witches during both the First and Second Wizarding Wars, employing them as his elite force. They often wore black hoods and masks with snake-like eye slits to cover their faces. Only the members of the inner circle of the Death Eaters had Dark Marks burned into their left forearms. When Voldemort touched one of them, each of the Death Eaters felt it, signalling for them to Apparate to their leader's side.
NN8221 -
Harry Potter - Horcrux diary of Tom Marvolo Riddle
Harry Potter - Horcrux diary of Tom Marvolo Riddle
The diary of Tom Riddle 's diary containing the memoirs of a sixteen year old Tom Marvolo Riddle , the future Lord Voldemort , stored for many years until the meeting with Lucius Malfoy Harry Potter and the Weasley family in the library " The Ghirigoro ." Lucius puts this diary to Ginny Weasley in the bag ; she starts to read it and is possessed by the Dark Lord who uses it to open the Chamber of Secrets and unleash his basilisk and to write posts with the blood on the walls . Finally Voldemort wants to use the vital energy of the girl for himself back to life. The diary is destroyed by Harry with a basilisk fang , and returned (now nothing more than a relic ) Lucius Malfoy.
In the sixth book , Harry Potter and the Half-Blood Prince , it turns out that the diary was a Horcrux .
Cover in leather with antiqued metal corners .
Thick paper without lines or squares, with aged effect
Size: 14x22 cm .
Note : the diary with blank pages without any content
It ' an official product licensed Noble Collection Harry Potter and Warner Bros. Entertainment8791 -
Harry Potter - Horcrux Medaglione di Serpeverde NN7968
Autentica riproduzione dietro licenza Warner Bros in scala 1:1 dell'Horcrux Medaglione di Serpeverde utilizzato per le riprese del film "Harry Potter e il Principe Mezzosangue". Ha dimensioni di 7x5cm. ed è corredato di collana in metallo anallergico e display espositivo in legno e vetro, con fondo a specchio.
Un Horcrux è un oggetto contenente un pezzo di anima separato dal corpo originario; se la persona che ha creato l'Horcrux subisce una ferita mortale, non muore: infatti il frammento d'anima imprigionato nell'Horcrux le impedisce di abbandonare il mondo.
Gli Horcrux vengono presentati ai lettori di Harry Potter nel sesto capitolo della saga ed Harry Potter deve trovarli distruggerli tutti per poter affrontare e sconfiggere Lord Voldemort
Il medaglione è realizzato in metallo anallergico satinato ed in polimeri simil-ambra, ha una cerniera che permette di aprirlo in due parti foderate in velluto verde. All'interno può contenere la lettera - NON FORNITA - che Regulus Black - fratello minore di Sirius Black - lascia a Lord Voldemort che recita:
“Al Signore OscuroSo che avrò trovato la morte molto prima che tu legga queste parole ma voglio che tu sappia che sono stato io ad aver scoperto il tuo segreto.
Ho rubato il vero Horcrux e intendo distruggerlo appena possibile.
Affronto la morte nella speranza che, quando incontrerai il tuo degno rivale, sarai di nuovo mortale.
R. A. B. ”8599 -
Harry Potter - Marauder's Map
Faithful reproduction of the Marauder's Map taken from the Harry Potter saga .
Made in parchment paper .It 'a product officially licensed Warner Bros. Entertainment Inc.
The Marauder's Map ( Marauder 's Map ) is a map created by the group they belonged to James Potter ( Harry's father , " Prongs " - the original English Prongs ) , Sirius Black ( Harry's godfather , " Fleeced " - Padfoot ) Remus Lupin ( " Moony " - Moony ) and Peter Pettigrew (Peter Pettigrew " Wormtail " - Wormtail ) .
The name of the Marauder's Map is representative of the fact that , within the exploits of Harry Potter , is used by the four ready to mess up the colors .
The map appearance may seem like a simple sheet of parchment , but if you utter the words " I do solemnly swear not to have good intentions," is a map that represents the whole Hogwarts, including the secret passages that lead to Hogsmeade and information on how to open them .
The map is also able to locate anyone at Hogwarts and of showing in real time the movements .
Eventually, when used with the words : " Mischief " , the map disappears and returns to look like a harmless piece of parchment white .
This trick prevents to use it to those who do not know the secret , but was nevertheless confiscated by Filch that he must have understood vaguely what it was .The twins Fred and George Weasley are in the office and steal, and of these only the third year , after having learned it by heart, regaleranno to Harry Potter , to allow him to visit Hogsmeade (for which was not allowed ) .
In this same book , Professor Snape finds the map in Harry's possession and tries to learn their secrets , but this responds insulting .
However, this is not surprising , since the creators of the map Snape hated by boys. Even after seeing him Lupin asked to borrow . Snape , however, insists to commandeer the map , sostendendo that contains black magic , but more likely because he recognized the nicknames of his "enemies" at school .
In the sixth book , however, is to find out the Marauder's Map does not show the room in the necessity, which is ' mysteriously ' hidden , since it is indisegnabile , because it appears only when necessary and changes in size and shape according to the usage needed.8613 -
Harry Potter - Oliver Wood's Magic Wand - NN8258
An authentic reproduction of the Magic Wand used by Oliver Wood in the movie "Harry Potter and the Deathly Hallows™"
It is made of resin and has a length of 36 cm.
It comes with the boxIt is a product licensed by Warner Bros. Entertainment Inc.
Oliver Wood (born c.1975 or 1976) was a Scottish wizard who was the Keeper and Captain for the Gryffindor Quidditch team. He attended Hogwarts School of Witchcraft and Wizardry from 1987 to 1994. Oliver was known for his determination and skill on the playing field, and his long lectures before practises. He led the Gryffindor team to victory in the Quidditch Cup in his seventh year. After leaving school, Oliver joined Puddlemere United as a reserve player (presumably as Keeper). In 1998, Oliver returned to Hogwarts to fight in the Battle of Hogwarts against Voldemort and his Death Eaters, alongside his former school friends and teammates.
NN8258 -
Harry Potter - Pius Thicknesse's Magic Wand - NN8248
An authentic reproduction of the Magic Wand used by Pius Thicknesse in the movie "Harry Potter and the Deathly Hallows™"
It is made of resin and has a length of 36 cm.
It comes with the boxIt is a product licensed by Warner Bros. Entertainment Inc.
Minister Pius Thicknesse was a wizard and a Ministry of Magic official in the mid to late 1990s. During the Second Wizarding War, he became Head of the Department of Magical Law Enforcement as well as, later in the War, Minister for Magic under Lord Voldemort's puppet regime while under the Imperius Curse and thus essentially Voldemort's puppet himself. He technically replaced Rufus Scrimgeour as Minister of Magic, who had been murdered by Voldemort. Thicknesse took part in the final conflict of the War where he fought alongside the Death Eaters, still under their curse.
He was ousted from power after Voldemort's defeat and was succeeded by Kingsley Shacklebolt in his post of Minister for Magic.
NN8248 -
Harry Potter - Xenophilius Lovegood's Necklace
It 'an official product licenses with Noble Collection Harry Potter and Warner Bros. Entertainment
Xenophilius "Xeno" Lovegood is a character in the series of Harry Potter novels written by JK Rowling.
It appears for the first time in the seventh book, Harry Potter and the Deathly Hallows [1].
He, however, is appointed by the fifth book, Harry Potter and the Order of the Phoenix, as the father of Luna Lovegood, classmate of Harry Potter, and editor of The Quibbler. Its name is derived from Greek and means "Friend of the different", tracing his passion for outlandish notions.Xenophilius Lovegood, always brings with it the symbol of the gifts, namely the triangular rune, hoping to meet other true believers who can help in the search.
He will reveal to Harry the Peverell family bonding with the three brothers of the legend, and this revelation will descend all the knowledge that Harry will acquire in the course of history, about the real Deathly Hallows.8713 -
Harry Potter, Horcrux Bookmarks Collection - NN8773
Collection of 7 bookmarks made of anallergic metal with plastic details representing the Horcrux of the Harry Potter universe. The bookmarks are enclosed in a box / casket made of heavy black cardboard, with silverware "Harry Potter".
A Horcrux is an object in which a Dark wizard or witch has hidden a fragment of his or her soul for the purpose of attaining immortality. Horcruxes can only be created after committing murder, the supreme act of evil.
NN8773 -
Harry Potter - Magic Wands Marauder's Map Wand Collection NN7905
The set includes an exhibitor of the Marauder's Map and four official wands of the magicians who created the map:
Remus Lupine ™, Peter Pettigrew ™, Sirius Black ™ and James Potter ™.
The display measures 39 cm high and 20 cm wide. The sticks measure about 38 cm in length.
It is an officially licensed product Warner Bros Entertainment Inc.
NN7905 -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB -
Fantastic Beasts and Where To Find - Newt Scamander Journal - NN5013 - Harry Potter
Authentic Official Reproduction of Newt Scamander Journal used in Fantastic Beasts and Where To Find It
Made of skin-like, with 256 white pages inside, it has dimensions of 18x10x1.9cm. And a weight of 324g.
It is a Noble Collection product, licensed by Warner Bros. Entertainment Inc.
NN5013 -
Fantastic Beasts and Where to Find Them - Newt Scamander Magic Wand - NN5622 - Harry Potter
Authentic Official Reproduction of the Portable Magic Wand of Newt Scamander used in Fantastic Animals and Where To Find Them
Made of hand-painted polyvinyl resin, it has a length of 35.5 cm and is equipped with a Collector Box.
It is a Noble Collection product, licensed by Warner Bros. Entertainment Inc.
NN5622 -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2 -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK -
Harry Potter - Time-Turner Hermione Granger - Silver .925 Gold Plated 24K - NN7763
An authentic reproduction of Hermione's Time-Turner ™ used in the movie "Harry Potter and the Prisoner of Azkaban ™"
The Time-Turner ™ is made of silver. with an hourglass in minaitura working and has a diameter of 35 mm.
Comes with chain from his neck and a wooden box.It 'a product officially licensed Warner Bros. Entertainment Inc.
NN7763 -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB -
Harry Potter - Diagon Alley Map Plate - NN7058 - official product
Harry Potter - plate of the map of Diagon Alley - NN7058 - official product
Diagon Alley Sign from Harry Potter and The Chamber Of Secrets.
It is made by Noble Collection and is Approximately 42 cm (16.5 in) wideA wood mounted 17 x 11 inch replica of the famous sign wizards' alley.
NN7058 -
Harry Potter - Magic Wand Remote Control to Harry Potter - TV remote control - NN8050
Harry Potter - Magic Wand Remote Control to Harry Potter - TV remote control
Remote Control / Remote Control for TV, DVD, and any device that can 'be controlled via Infrared IR
It 'made of plastic and works with 2x 1.5v AA batteries (not included) and has a length of 36 cm.
It 'an officially licensed product with Warner Bros Entertainment Inc.
Watch the video below to understand its operation.
NN8050 -
Harry Potter - Love Potion Hermione Granger - necklace with display - NN7599
Authentic reproduction under license from Warner Bros 1:1 Pendant from Hermione used as a container for love potions.
The container, in the shape of the heart, is made of glass, with metal ornaments and a chain length of about 45 cm.
Included elegant wooden display with glass cover.
Hermione Jean Granger (/hərˈmaɪ.əni ˈdʒiːn ˈɡreɪndʒər/) is a fictional character in J. K. Rowling's Harry Potter series. She first appears in Harry Potter and the Philosopher's Stone, as a new student on her way to Hogwarts. After Harry and Ron save her from a mountain troll in the girls' toilets, she becomes best friends with them and often uses her quick wit, deft recall, and encyclopaedic knowledge to help them. Rowling has stated that Hermione resembles herself at a younger age, with her insecurity and fear of failure.
NN7599 -
Harry Potter - Bacchetta Magica di Cedric Diggory NN8202
Un'autentica riproduzione della Bacchetta Magica di Cedric Diggory utilizzata nel film "Harry Potter ed il Deathly Hallows™"
E' realizzata in resina ed ha una lunghezza di 36 cm.
Viene fornito con la scatola
E' un prodotto con licenza ufficiale Warner Bros Entertainment Inc.
Cedric Diggory è un personaggio della serie di libri di Harry Potter scritta ed ideata negli anni novanta da Joanne Kathleen Rowling, ma concretizzata alcuni anni dopo.
Il cognome Diggory è una ripresa dal primo romanzo de Le cronache di Narnia di C.S. Lewis, "Il nipote del Mago", il cui protagonista si chiama appunto Digory.
La stessa Rowling ha dichiarato di essere un'appassionata lettrice del ciclo di Narnia.
Sara V.Added by Sara V.
Cedric è il figlio di Amos Diggory, impiegato del Ministero della Magia, frequenta la scuola di magia e stregoneria di Hogwarts nella casa del Tassorosso fino al 1995, quando muore.Harry lo incontra per la prima volta al suo terzo anno, in occasione di una partita di Quidditch tra Grifondoro e Tassorosso, dove i secondi vincono a causa dell'intervento dei dissennatori che fanno cadere Harry dalla scopa.
Tuttavia in quell'occasione Cedric dà prova della sua lealtà cercando di convincere l'arbitro ad annullare l'incontro.
La sua richiesta non viene però accettata poiché tutti ammettono che la vittoria è stata ottenuta da Cedric in modo onesto.NN8202 -
Harry Potter - Bacchetta Magica di Gregorovitch NN8260
Un'autentica riproduzione della Bacchetta Magica di Gregorovitch utilizzata nel film "Harry Potter ed il Deathly Hallows™"
E' realizzata in resina ed ha una lunghezza di 36 cm.
Viene fornito con la scatola
E' un prodotto con licenza ufficiale Warner Bros Entertainment Inc.
Gregorovitch è un fabbricante di bacchette. Viene citato per la prima volta in Harry Potter e il Calice di Fuoco, quando lo stesso Olivander, nel capitolo "La pesa delle bacchette", dichiara a Viktor Krum che la sua bacchetta è una creazione di Gregorovitch.
In Harry Potter e i Doni della Morte si scopre che egli possedeva, nonostante Olivander pensasse che fossero solo voci di corridoio, la Bacchetta di Sambuco, che gli fu però poi sottratta dal mago oscuro Grindelwald. Viene ucciso da Voldemort, anche lui alla ricerca della Bacchetta.8623 -
Harry Potter - Bacchetta Magica di Harry Potter in bronzo NN8501
Un'autentica riproduzione della Bacchetta Magica di Harry Potter realizzata in bronzo utilizzata nel film "Harry Potter e il prigioniero di Azkaban™"
E' realizzata in bronzo ed ha una lunghezza di 36 cm.
Viene fornito con un elegante espositore in legno
E' un prodotto con licenza ufficiale Warner Bros Entertainment Inc.
Harry Potter (nome completo Harry James Potter) rimane orfano all'età di 1 anno, quando Lord Voldemort uccide i suoi genitori James Potter e Lily Evans, che muoiono per salvarlo; l'amore della madre, unito ad un potente incantesimo, gli dona una protezione sicura per molti anni e un potere molto forte, che in futuro gli servirà per affrontare lo stesso Voldemort. Questo, quando punta la bacchetta magica contro Harry, pronuncia l'incantesimo "Avada Kedavra", maledizione che ha ucciso molti maghi. Miracolosamente, il maleficio non uccide Harry e rimbalza contro Voldemort, che diventa un'anima senza corpo. Harry si ritrova, come ricordo dell'attacco di Lord Voldemort, una cicatrice sulla fronte a forma di saetta. La stessa notte, il padrino di Harry, Sirius Black, viene arrestato ingiustamente, con l'accusa di aver ucciso Peter Minus, amico d'infanzia suo e di Lily e James Potter, e 13 Babbani. Harry Potter viene ritrovato tra le macerie della sua casa dal Mezzogigante Rubeus Hagrid che, con una potente motocicletta volante regalatagli da Sirius, lo porta al numero 4 di Privet Drive, in un sobborgo di Londra. Qui, la professoressa McGranitt (insegnante alla scuola di magia e stregoneria di Hogwarts) e il professor Albus Silente (uno dei maghi più potenti del mondo e preside di Hogwarts) prendono Harry e lo lasciano davanti alla porta della casa della famiglia della sorella di sua madre con una lettera di spiegazione dell'accaduto e la richiesta di accogliere il neonato. Harry viene adottato dai suoi zii, i Dursley, che gli celano con attenzione tutta la conoscenza della sua eredità magica, dicendogli che i suoi genitori sono periti in un incidente d'auto. Alcuni giorni prima dell'undicesimo compleanno di Harry, un gufo gli porta una lettera che lo invita a iscriversi alla scuola di Hogwarts, arrecando molto fastidio allo zio Vernon. Gli zii di Harry cercano in tutti i modi di nascondergli il contenuto della lettera, ma Rubeus Hagrid, che riesce a raggiungere il nascondiglio scelto da zio Vernon, arriva nel giorno dell'undicesimo compleanno del maghetto (età in cui i giovani maghi entrano nella scuola di magia e stregoneria di Hogwarts) e gli svela tutto. Così Harry inizia a frequentare la scuola di magia, insieme agli amici Ron Weasley, un ragazzo proveniente da una famiglia di maghi relativamente poveri, e Hermione Granger, figlia di due "Babbani" (persone senza poteri magici).8790