Last up date
-
Moretto - Corkscrew made in Italy 4 - ABS Colour
The corkscrew Moretto an indispensable partner of the tradition of good wine. Every moment of conviviality that expression emotional stresses that a meeting point for culture, beauty, functionality and design.
Moretto consists of 3 parts assembled entirely made of a special resin. The operation of screwing and unscrewing facilitated by the bearing of balls placed inside the corkscrew.6878NEW€32.71Only 2 left -
Moretto - Corkscrew made in Italy - Metal Colors
The corkscrew Moretto an indispensable partner of the tradition of good wine. Every moment of conviviality that expression emotional stresses that a meeting point for culture, beauty, functionality and design. Moretto consists of 3 parts assembled entirely made of a special resin. The operation of screwing and unscrewing facilitated by the bearing of balls placed inside the corkscrew. Moretto - Corkscrew made in Italy - Metal Colors The Moretto plastic corkscrew is a cheaper version than the aluminum one, it differs from the previous one only for the motor part that is actually made of plastic rather than aluminum. The numbers: The dimensions are the same as the aluminum corkscrew. Total height, with cap inserted: cm 15.2, diameter: cm 5.3. Perforating drill: ∅ cm 1.2 with a perforating capacity of 6.5 cm. The Moretto corkscrew is available in 5 new colors: carbon, silver gray, lead, manganese and walnut.6878METAL€34.43Only 2 left -
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP -
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY -
Lame d'autore - N° 70 - 04/2016 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)In questo numero troverete:
PROFILI: Celso Fiocchi, Pasquale De Bartolomeo
TECNICA: Cucire il fodero
REPORTAGE: Il Cic attraverso le foto di Francesco Pachì, Shot show
TEST: Blackfox Bf-705b Sai, Fällkniven Pc, Prezioso Ferus desert, Spyderco Dogtag folder C188
PROFILO AZIENDA: Kunzi compie 80 anni
STORIA: Pugnali-coltelli da assaltatore, 1915-16; La rinascita della LeppaLame70 -
Lame d'autore - N° 68 - November 2015 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)In questo numero troverete:
TECNICA: Costruiamo il fodero; Il restauro dei rasoi
REPORTAGE: Achi show, Coltello in festa; Feria de Albacete; Ficx 2015
STORIA: Pugnale da assaltatore 1960; Victorinox in orbita
TEST: Azero 211012; Fkmd Wilson combat Fx.307Cb Rapid response; Outdoor edge Brush demon; North arm knives Osprey; Spyderco Lil' LionSpy C181Gti; Wallet Ninja.lame68 -
Lame d'autore - N° 67 - July 2015 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)In questo numero troverete:
- Speciale visita a Pattada
- Reportage IWA
- Storia: Pugnale 1936 Opera balilla
- Test:
* Azero 151233
* Black Fox Trackmaster
* Camillus Les Stroud
* Spyderco Brad Southard
lame67 -
Lame d'autore - N° 65 - January 2015 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)Un grande fascicolo questo n°65 del trimestrale Lame d'autore. Ci sono reportage dal salone della Corporazione italiana coltellinai di Milano e quello di Culter expo, a Novegro (Mi).
Poi un excursus sui coltelli survival di Maurizio Ceracchi e il profilo del coltellinaio piemontese Luciano Ferraudo.
Per la storia, siamo andati a studiare il pugnale per assaltatori del Rei modello 1939 e il Victorinox Soldier.
La sezione della tecnica si occupa della temprabilità e struttura degli acciai.
Imperdibile il glossario dedicato alla lettera C con oltre 50 voci.
Questi i test: Atk Aquitania, Browning Non-typical stag, Crkt Drifter large, Extrema Ratio Resolza, Mitchell Tarlo, Muela 21733-G, Spyderco Domino pin
lame65 -
Lame d'autore - N° 62 - April 2014 - magazine
Color Magazine , Quarterly , produced and distributed in Italy since 1998.
Specializing in knives of all types ( collection , craft , military, sports and multi-purpose)
80 Pages
A number this explosive 62 which inaugurates the 15th year of the magazine Lame author , the first and most important part of the landscape .
Victorinox , however, it turns 130 years old : we went to visit the factory where they produce 120 thousand knives a day. Reporting from the guild hall Italian knife , custom knives with the most interesting of the moment and pictures of Francesco Pachì and shot by American show in Las Vegas. The profile is dedicated to Michael " Cormoran " Sferragatta .
The magazine continues with the technique of sharpening of the razor with the use of very traditional strop ...
These tests : 110 Buck Hunter anniversary , Condor Kukri machete , P3G Fallkniven , Fox knives - Golok Hitam , Great eastern cutlery lockable Maserin GTO , Viper Carnera , Woodlore 25th anniversary .
Of course, much more to be the best survival knife and knives created by readers of the Facebook group .lame63 -
Lame d'autore - N° 62 - April 2014 - magazine
Color Magazine , Quarterly , produced and distributed in Italy since 1998.
Specializing in knives of all types ( collection , craft , military, sports and multi-purpose)
80 Pages
A number this explosive 62 which inaugurates the 15th year of the magazine Lame author , the first and most important part of the landscape .
Victorinox , however, it turns 130 years old : we went to visit the factory where they produce 120 thousand knives a day. Reporting from the guild hall Italian knife , custom knives with the most interesting of the moment and pictures of Francesco Pachì and shot by American show in Las Vegas. The profile is dedicated to Michael " Cormoran " Sferragatta .
The magazine continues with the technique of sharpening of the razor with the use of very traditional strop ...
These tests : 110 Buck Hunter anniversary , Condor Kukri machete , P3G Fallkniven , Fox knives - Golok Hitam , Great eastern cutlery lockable Maserin GTO , Viper Carnera , Woodlore 25th anniversary .
Of course, much more to be the best survival knife and knives created by readers of the Facebook group .LAME62 -
Lame d'autore - Numero 61 - Dicembre - Anno 2013 - rivista
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)
80 Pagine
Storia: Coltelli ed ex voto
Tecnica: Teoria dei trattamenti termici degli acciai
Reportage: Culter Expo 2013
Legge: Perché la cassazione ci è ostile?
Profilo: Marcello Garau
Test coltelli: Brusletto Villmann, Condor Koukri, Extrema Ratio Dicok, Fkmd Exagon range, Morris Knives Friction folder, Stuart Mitchell knives Secare, Spyderco Brad Southard Pin, Viper Mathusalemlame61 -
Lame d'autore - Numero 60 - Ottobre - Anno 2013 - rivista
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)
80 Pagine
STORIA
Coltellate risorgimentali nello Stato Pontificio
TECNICA
I rasoi con lame sinterizzate
REPORTAGE
Maniago campione d'Europa
PROFILO
Giuseppe Galante
TEST
Brustello Trillemarka
Camillus Les Stroud Sk Arctic
Crkt Ken Onion Foresight
Fantoni Contrast utility tactical
Fox Zero
Gerber Bear Grylls Ultimate pro fixed blade
Lion Steel TiSpine
Victorinox Hunter pro
Viper Rhinolame60 -
Lame d'autore - Numero 59 - Maggio - Anno 2013 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine STORIA Gli accoltellatori "tirannicidi" TECNICA Il maglio di Scordia Forgiatura e tempra di Yoshindo Yoshihara L'affilatura “serrated” REPORTAGE Shot Show Iwa Exa TEST Condor Nessmuk Crkt Eraser 8900K Cudeman 123M Cesar Bozal Extrema Ratio Rao Avio Fox Parang Nilte Quiete Viper Freelame59 -
Lame d'autore - Numero 58 - Febbraio - Anno 2013 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine PROFILI Pekka Tuominen Marco Selis STORIA Coltelli Toscani TEST Fallkniven GP Fox Tracker Meskwaki Morris Friction Folder Kallioniemi Puukko Maserin Atti Mtech Mini Rockstead Higo-J Spyderco Pingo Viper David e Golia FAI DA TE Picchetto e tensionatore d'emergenza REPORTAGE Cic Show e Culter Expolame58 -
Moretto - Corkscrew made in Italy 3 - Colour
The corkscrew Moretto an indispensable partner of the tradition of good wine. Every moment of conviviality that expression emotional stresses that a meeting point for culture, beauty, functionality and design.
Moretto consists of 3 parts assembled entirely made of a special resin. The operation of screwing and unscrewing facilitated by the bearing of balls placed inside the corkscrew.6878€32.71Only 2 left -
Lame d'autore - Numero 25 - Gennaio/Febbraio/Marzo 2005 - rivista
TEST:
* Boker - Voros Neck Knife
* Thiers Issard Sabatier - Regionali francesi
* Fallkniven - TK3 - vedi la scheda prodotto
* Fox - Karambit - vedi la scheda prodotto
PERSONAGGI:
* Rick Bowles
* Ettore Gianferrari
* Fabrizio "Silvester" Silvestrelli
ED INOLTRE:
* I Maestri del Knife Fighting
* Culter Expo
* Show di MilanoL2005-25 -
Lame d'autore - Numero 54 - Ottobre - Anno 2012 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 88 Pagine
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.L2012-54 -
Lame d'autore - Numero 55 - Aprile - Anno 2012 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine
INDICE:
* Reportage: 34esima edizione Shot Show Las Vegas
* Reportage: CIC 2011
* Test: Spyderco - Des Horn - C153G
* Test: Maserin - Combat Ready
* Test: Lionsteel SR-1
* Test: Viper Tank
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.L2012-55 -
Lame d'autore - Numero 56 - Luglio - Anno 2012 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine
INDICE:
* Reportage: Coutellia
* Reportage: Exa
* Reportage: Sant'Oreste
* Test: Maserin - Diabolik
* Test: Opinel - Outdoor
* Test: Viper - Keeper
* Test: CRKT - Ripple
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.L2012-56 -
Moretto - Corkscrew made in Italy
Moretto - Corkscrew made in Italy The corkscrew Moretto is an indispensable companion of good tradizionedel drink typically italiana.Ogni moment of conviviality and festasottolinea emotional expression which is a meeting point between culture, beauty, features and design. Moretto is composed of three parts assembled to form the central part and the driving part, entirely in aluminum. The piercing tip is steel coated with a chromium plating treatment suitable tothe foods. The numbers: Total height, inserted in cap: 15.2 cm. Drill bit tip: 1,2 cm with drilling capacity to 6.5 cm. operation Remove the lower ring whose function is to protect the "worm". Gently place your hand on the corkscrew bottle cork trying to position the worm at the center. Make a little 'pressione.Successivamente turn the upper ring nut clockwise to successfully extract the cork from the bottle. To remove the cork from the corkscrew now turn the nut counterclockwise An important feature of Moretto is that the screwing and unscrewing for the extraction of the cap is facilitated by the ball bearing placed inside the body, in the higher. Available in silver and black.6880€68.85Only 1 left -
Moretto - Wine Cellar
CANTINETTA MORETTO - MORETTO WINE CELLAR The Moretto Wine Cellar is a refined design element where you can store your precious wine bottles. Each wine cellar can hold 8 bottles. The wine cellars are stackable, so in this way you will have a superior capacity. Sizes: Width: 55.5 cm, height: 12 cm; depth: 28 cm. Color: The Moretto Wine Cellaris available in silver color.5243S€229.51Only 1 left -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2 -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB -
Moretto - Corkscrew Made in Italy 2
The corkscrew Moretto an indispensable partner of the tradition of good wine. Every moment of conviviality that expression emotional stresses that a meeting point for culture, beauty, functionality and design.
Moretto consists of 3 parts assembled entirely made of a special resin. The operation of screwing and unscrewing facilitated by the bearing of balls placed inside the corkscrew.
The Moretto corkscrew patented. It 'available in verisione "Made in Italy" (green, white and red).6879€32.79Only 0 leftOut of stock