Last up date
-
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP -
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2 -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB -
Microtech - DOC Blue Satin - Death on Contact - 153-7BL - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione10838 -
Microtech - DOC Green Stone Washed - Death on Contact - 153-4GR - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione10837 -
Microtech - DOC Black Carbon Fiber - Death on Contact - 153-1T - knife
Microtech DOC Black - Death on Contact - Flipper Knife - Knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Black Coating
Handle: Aluminum 6061T6 Aeronautics and Carbon Fiber
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with logos Microtech
Design: Mick Strider and Anthony MarfioneMCT1531T -
Microtech - Metalmark - Black Serrated Titanium - 170-2
The Metalmark from Microtech has uniquely shaped handles that open to reveal a blade shape that simply flows. The channel handles are 6Al4V titanium, bead blast finished with Torx pivot screw adjustment and a spring loaded latch. The blade is 154-CM steel with a black finish. The build on the Metalmark balisong is solid. Specifications: Overall Length: 9.125" Blade Length: 3.875" Handle Material: 6Al4V Titanium Closed Length: 5.25" Weight: 6.0 oz.10051 -
Microtech - Metalmark - Satin Standard - 170-4
The Metalmark from Microtech has uniquely shaped handles that open to reveal a blade shape that simply flows. The channel handles are aluminum, black anodized with Torx pivot screw adjustment and a spring loaded latch. The blade is Elmax steel with a satin finish. The build on the Metalmark balisong is solid. Specifications: Overall Length: 9.125" Blade Length: 3.875" Blade Steel: Elmax Handle Material: 6061-T6 Aluminum Closed Length: 5.25" Weight: 4.8 oz.10050 -
Microtech - Metalmark - Silver Stonewash Standard - 170-10SI
The Metalmark from Microtech has uniquely shaped handles that open to reveal a blade shape that simply flows. The channel handles are aluminum, black anodized with Torx pivot screw adjustment and a spring loaded latch. The blade is 154-CM steel with a stonewash finish. The build on the Metalmark balisong is solid. Specifications: Overall Length: 9.125" Blade Length: 3.875" Blade Steel: 154-CM Handle Material: 6061-T6 Aluminum Closed Length: 5.25" Weight: 4.8 oz.10049 -
Microtech - Socom Delta - Tanto full Serrated - Black G-10 - 163-12 - coltello
The Microtech Socom Delta knife is the next generation of this classic folder and the winner of the "American Made Knife of the Year" at the 2012 BLADE Show. The Socom Delta features Microtech's titanium sub-lock tab and G10 composite handles, 3D machined with a subtle yet effective texture. The handle has bead blast finished hardware, pocket clip and a titanium back-strap with lanyard hole. Torx T30 pivot adjustment screw. This Socom Delta has a Tanto blade of S35VN steel with a bead blast finish and a partially serrated edge. The blade is deployed with ambidextrous thumb studs. The fit and finish of the Socom Delta Tanto is excellent, just as you'd expect from Microtech. Specifications: Overall Length: 9" Blade Length: 4" Cutting Edge: 3.75" Blade Steel: S35VN Blade Finish: Bead Blast Blade Edge: Partially Serrated Handle Material: Black G10 Closed Length: 5" Weight: 4.6 oz. Made in the USA10043 -
Microtech - Socom Elite - Tanto Plain Satin - Green Alluminum and Carbon Fiber - 161-4GR - coltello
The Socom Elite M/A knife from Microtech has been reintroduced as a 2011 model. This is a manual action liner lock folder. It features a stonewash finished S35-VN stainless steel tanto blade and dual thumb studs. The green anodized 6061-T6 aluminum handle has carbon fiber inserts. The Socom Elite knife includes a glass breaker and tip-down carry pocket clip. This Socom Elite features a free floating lock and ceramic race bearing system! Specifications: Overall Length: 9.2" Blade Length: 4" Closed Length: 5.2" Weight: 4.6 oz.10042 -
Microtech - Select Black Fire - Carbon Fiber Inserts - knife
Microtech's Select-Fire is their 2011 offering in the D/A (Dual Action) market. While there are numerous Dual Action offerings among manufacturers, this design won the Most Innovative award at the 2011 Blade Show. This model features a button for automatic deployment of the side opening blade, a large liner lock, oversized thumb stud for manual deployement, index choil for higher grip allowing precision cutting, anti-slip thumb grooves, and a pocket clip. Microtech's Select-Fire comes with a tool to lock the knife's automatic capability rendering it a manual only operating knife.
Dimensions
Blade Steel: Sheath: S35-VN
Blade Length: 3.73 inches
Overall Length: 8.9 inches (approx)
Handle Material: 6061-T6 AL w/ CF inlays
Glassbreaker: Tip-Up
Pocket Clip: Yes5656B -
Microtech - SF M / A Stone Washed - knife
Microtech - SF M / A Stone Washed - knife
Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Blade treatment: Stone Washed
Handle: Aluminium 6061T6 Aviation and Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 140mm.
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 145g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with Microtech logos
Notes: Awarded to Blade Awards 2011 as the most Innovative Design5656S -
Microtech - Socom Elite Black - 160-1 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio CPM-S35VN
Manicatura: Alluminio aueronautico 6061T6 e fibra di carbonio
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5654 -
Microtech - Socom Elite Black Tan - 160-1 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio CPM-S35VN
Manicatura: Alluminio aueronautico 6061T6 e fibra di carbonio
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5654D -
Microtech - Socom Elite Satin Serrated - 160-05 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio inox CPM-20CV
Manicatura: Alluminio aueronautico 6061T6 ed inserti antiscivolo
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5653 -
Microtech - Socom Elite Tan Satin - 160-10 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio inox CPM-20CV
Manicatura: Alluminio aueronautico 6061T6 ed inserti antiscivolo
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5653D