Last up date
-
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP -
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY -
Reallum - Magnet for the Rolling Pin - Made in Italy
Reallum - Magnet for the Rolling Pin - Made in Italy Accessory to match any size of Reallum rolling pins. The innovative, super-lightweight, ultra-handy, perfectly hygienic professional rolling pin, which is also an airtight container in which hot or cold liquids can be inserted to maintain a correct working temperature. Lightness synonymous with comfort It is customary to think that the yield on the dough is due to the weight of the rolling pin and therefore the yield is greater. In reality, the yield depends on the force exerted by the arms and the diameter of the rolling pin. Mattarello has been designed to facilitate the processing of any type of pasta.4959MAGNETE€8.11Only 2 left -
Made in Italy - Reallum Rolling Pin double pack - 44 + 24 cm.
Made in Italy - Reallum Rolling Pin double pack - 44 + 24 cm. The innovative rolling pin professional superlight, manoeuvrable, absolutely hygienic, which is also an airtight container where necessary insert hot or cold liquids to maintain proper working temperature.
Lightness synonymous with comfort It is usual to think that the yield sull'impasto is due to the weight of the rolling pin and therefore the greater the yield. In fact the yield depends on the force exerted by the arms and the diameter of the rolling pin. the Mattarello has been studied is made to facilitate the processing of any type of pasta. E 'with two seals spherical silicone, ensuring a tight seal, allow to fill a rolling pin with hot liquids to soften hard dough or cold liquids to compact soft cheeses. For a homogeneous surface cooling the rolling pin can be placed in the refrigerator a few minutes before processing. (Ideal for pastry). Technical features: Rolling pin length of 44cm diameter cm. 5.8. 2 balls silicone closure. ultralight elegant comfortable pan and hygienic recyclable aluminum Available colors: gray or gunmetal. ReAllum® The Rolling Pin Rolling Pin is the first nice to use, nice to see, nice to have and ... nice to make a gift4959-M4€40.90Only 2 left -
Made in Italy - Reallum Rolling pin 24 cm ultralight
Made in Italy - Rolling pin 24 cm ultralight The innovative rolling pin professional superlight, manoeuvrable, absolutely hygienic, which is also an airtight container where necessary insert hot or cold liquids to maintain proper working temperature.
Lightness synonymous with comfort It is usual to think that the yield sull'impasto is due to the weight of the rolling pin and therefore the greater the yield. In fact the yield depends on the force exerted by the arms and the diameter of the rolling pin. the Mattarello has been studied is made to facilitate the processing of any type of pasta. E 'with two seals spherical silicone, ensuring a tight seal, allow to fill a rolling pin with hot liquids to soften hard dough or cold liquids to compact soft cheeses. For a homogeneous surface cooling the rolling pin can be placed in the refrigerator a few minutes before processing. (Ideal for pastry). Technical features: Rolling pin length of 44cm diameter cm. 5.8. 2 balls silicone closure. ultralight elegant comfortable pan and hygienic recyclable aluminum Available colors: gray or gunmetal. ReAllum® The Rolling Pin Rolling Pin is the first nice to use, nice to see, nice to have and ... nice to make a gift4959-M2€20.08Only 3 left -
Made in Italy - Reallum Rolling pin 44 cm ultralight
Made in Italy - Rolling pin 44 cm ultralight The innovative rolling pin professional superlight, manoeuvrable, absolutely hygienic, which is also an airtight container where necessary insert hot or cold liquids to maintain proper working temperature.
Lightness synonymous with comfort It is usual to think that the yield sull'impasto is due to the weight of the rolling pin and therefore the greater the yield. In fact the yield depends on the force exerted by the arms and the diameter of the rolling pin. the Mattarello has been studied is made to facilitate the processing of any type of pasta. E 'with two seals spherical silicone, ensuring a tight seal, allow to fill a rolling pin with hot liquids to soften hard dough or cold liquids to compact soft cheeses. For a homogeneous surface cooling the rolling pin can be placed in the refrigerator a few minutes before processing. (Ideal for pastry). Technical features: Rolling pin length of 44cm diameter cm. 5.8. 2 balls silicone closure. ultralight elegant comfortable pan and hygienic recyclable aluminum Available colors: gray or gunmetal. ReAllum® The Rolling Pin Rolling Pin is the first nice to use, nice to see, nice to have and nice to make a gift ..4959-M1€28.61Only 1 left -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2 -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB