Last up date
-
Masahiro - Flexible Carving 200mm - MV-Honyaki M-14962 - Japanese kitchen knife
The Masahiro knives come directly from the city of Seki, Japan.
The quality of these Masahiro knives is very high and they are characterized by an asymmetric processing of the blades: the left side of the blade is flat, the other side of the knife is beveled up to the edge and then polished. This modern Japanese blade design translates into a superior cutting capacity.
The MV series is made of molybdenum vanadium stainless steel MBS-26 (similar to a Sandvik 19C27 or a 440C and predecessor of the VG-10). The handles are riveted to a full tang with thin layers of black-stained wood pressed into a transparent (but not polished) polyamide.
Recommended use: Meat, fish, fish cleaning
Country of production: Japan
Type of production: Industrial
Blade: Hitachi stainless steel MBS-26 at 58HRC
Handle: Synthetic, riveted
Blade length: 205mm.
Blade thickness: 1.5mm.
Total length: 335mm.
Weight: 114g.
Cleaning and maintenance: hand wash - not dishwasher safeM-14962 -
Masahiro - Santoku Olivato 175mm - MV-Honyaki M-14993 - Japanese kitchen knife
The Masahiro knives come directly from the city of Seki, Japan.
The quality of these Masahiro knives is very high and they are characterized by an asymmetric processing of the blades: the left side of the blade is flat, the other side of the knife is beveled up to the edge and then polished. This modern Japanese blade design translates into a superior cutting capacity.
The MV series is made of molybdenum vanadium stainless steel MBS-26 (similar to a Sandvik 19C27 or a 440C and predecessor of the VG-10). The handles are riveted to a full tang with thin layers of black-stained wood pressed into a transparent (but not polished) polyamide.
Recommended use: Vegetables
Country of production: Japan
Type of production: Industrial
Blade: Hitachi stainless steel MBS-26 at 58HRC
Handle: Synthetic, riveted
Blade length: 175mm.
Blade thickness: 2.5mm.
Total length: 300mm.
Weight: 115g.
Cleaning and maintenance: hand wash - not dishwasher safeM-14993 -
Masahiro - Utility 150mm - MV-Honyaki M-14904 - Japanese kitchen knife
The Masahiro knives come directly from the city of Seki, Japan.
The quality of these Masahiro knives is very high and they are characterized by an asymmetric processing of the blades: the left side of the blade is flat, the other side of the knife is beveled up to the edge and then polished. This modern Japanese blade design translates into a superior cutting capacity.
The MV series is made of molybdenum vanadium stainless steel MBS-26 (similar to a Sandvik 19C27 or a 440C and predecessor of the VG-10). The handles are riveted to a full tang with thin layers of black-stained wood pressed into a transparent (but not polished) polyamide.
Recommended use: Salami, Meat, Cheese
Country of production: Japan
Type of production: Industrial
Blade: Hitachi stainless steel MBS-26 at 58HRC
Handle: Synthetic, riveted
Blade length: 155mm.
Blade thickness: 2mm.
Total length: 265mm.
Weight: 75g.
Cleaning and maintenance: hand wash - not dishwasher safeM-14904 -
Masahiro - Utility 145mm - MV-Honyaki M-14906 - Japanese kitchen knife
The Masahiro knives come directly from the city of Seki, Japan.
The quality of these Masahiro knives is very high and they are characterized by an asymmetric processing of the blades: the left side of the blade is flat, the other side of the knife is beveled up to the edge and then polished. This modern Japanese blade design translates into a superior cutting capacity.
The MV series is made of molybdenum vanadium stainless steel MBS-26 (similar to a Sandvik 19C27 or a 440C and predecessor of the VG-10). The handles are riveted to a full tang with thin layers of black-stained wood pressed into a transparent (but not polished) polyamide.
Recommended use: Utility, meat, fish, vegetables
Country of production: Japan
Type of production: Industrial
Blade: Hitachi stainless steel MBS-26 at 58HRC
Handle: Synthetic, riveted
Blade length: 145mm.
Blade thickness: 2.5mm.
Total length: 265mm.
Weight: 132g.
Cleaning and maintenance: hand wash - not dishwasher safeM-14906 -
Masahiro - Chef Carving 210mm - MV-Honyaki - Japanese kitchen knife
Recommended use: Raw meat, vegetables, fish cleaning
Country of production: Japan
Type of production: Industrial
Blade: Hitachi stainless steel MBS-26 at 58HRC
Handle: Synthetic, riveted
Blade length: 210mm.
Blade thickness: 2.5mm.
Total length: 330mm.
Weight: 145g.
Cleaning and maintenance: hand wash - not dishwasher safeM-14911 -
Masahiro - Chef Carving 240mm - MV-Honyaki - Japanese kitchen knife
Recommended use: Raw meat, vegetables, fish cleaning
Country of production: Japan
Type of production: Industrial
Blade: Hitachi stainless steel MBS-26 at 58HRC
Handle: Synthetic, riveted
Blade length: 240mm.
Blade thickness: 2.5mm.
Total length: 375mm.
Weight: 202g.
Cleaning and maintenance: hand wash - not dishwasher safeM-14912 -
Ahti Finland - Janka 75 - Finnish Puukko - Knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava. These knives are a perfect combination between tradition and quality construction.
Intended Use: Hunting / Sporting
Type of production: Hand
Blade: carbon steel 59HRC by Laurin Metals
Production Country: Finland
Handle: birch burl with brass bolsters
Blade length: 78mm.
Blade thickness: 3mm.
Overall length: 190mm.
Balancing: Defensive 2cm from the guard branch
Weight: 84g.
Sheath: leather with plastic insert
Notes: -14407 -
Ahti Finland - Kaira 72 - knife
Ahti Finland - Kaira 72 - knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.Intended Use: Hunting / Sports
Type of production: crafts
Blade: carbon steel 59HRC by Laurin Metals
Production Lama: Finland
Handle: Birch with brass bolster
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: backlog 2cm from the branch guard
Weight: 120g.
Sheath: Leather with plastic insert
Notes: Cutlery Collini is distributor for Italy knives Ahti14403 -
Ahti Finland - Finnman 95-14401 - knife
Ahti Finland - Finnman 95-14401 - knife
Knife made in the Finnish city Kauhava.
Intended Use: Hunting / Sports / Fishing
Type of production: Industrial
Blade: steel stainless steel X55
Production Lama: Finland
Handle: plastic
Blade length: 90mm.
Blade Thickness: 2.5mm.
Overall length: 205mm.
Balancing: 2 cm back from the branch guard
Weight: 76g.
Sheath: Plastic
Notes: Cutlery Collini is distributor for Italy knives Ahtiafi95 -
Gatco - Edgemate Diamond Knife Sharpening System - 10004 - accessories knives
Gatco Sharpening Kit professional American company that enables even the less experienced of affiare perfectly smooth or serrated blades in a very short time without the possibility of error.
The kit includes a chuck T thanks to which you can safely block the blade to be sharpened and keep under control the angle of the wire using the various holes at different distances depending on the angle to maintain (patented Gatco). The three stones are of three diamond grits: fine (pink), medium (green) and large (orange). There is also a special ceramic stone triangular (medium blue) to sharpen serrated blades or partially serrated and a vial of 60ml of synthetic oil formulated for the task of sharpening. Everything is contained in a box of ABS with the following sizes: 24x16, 5x4 cm.
6404-10004 -
Finland Ahti - Field Dressing 80 - knife
Finland Ahti - Field Dressing 80 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 77mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives6783 -
Finland Ahti - Leuku 145 - knife
Finland Ahti - Leuku 145 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 145mm.
Blade Thickness: 3mm.
Overall length: 264mm.
Balancing: the branch guard
Weight: 192g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14411 -
Finland Ahti - Leuku 180 - knife
Finland Ahti - Leuku 180 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 180mm.
Blade Thickness: 3mm.
Overall length: 300mm.
Balancing: the branch guard
Weight: 215g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14412 -
Finland Ahti - Leuku 90 - Knife
Finland Ahti - Leuku 90 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 90mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: the branch guard
Weight: 170g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14410 -
Finland Ahti - Metsa 95 - Knife
Finland Ahti - Metsa 95 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 205mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14402 -
Finland Ahti - Tikka 62 - knife
Finland Ahti - Tikka 62 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch
Blade length: 63mm.
Blade Thickness: 3mm.
Overall length: 170mm.
Balancing: the branch guard
Weight: 50g.
Sheath: Leather
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14401 -
Finland Ahti - Vaara - knife
Finland Ahti - Vaara - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: 2.5 cm back from the guard
Weight: 94g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14405