Last up date
-
Boker Magnum - Field Flipper - 01SC006 - knife
In everyday life or outside of it, the Magnum Field Flipper is an EDC knife for all occasions.
The pocket knife stands out above all by its tactically unobtrusive appearance. The black-coated 440A stainless steel blade and military green Micarta handle are attractive features. The blade opens smoothly with a ball-bearing flipper system or with a thumb pin on either side and closes reliably with a linerlock. Supplied with a lanyard hole and tip-up clip.
Type of manufacture: industrial
Blade: 440A 56HRC stainless steel
Blade finish: Teflon coated
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.8mm.
Total length: 183mm.
Weight: 108g.
Closure: liner lock
Clip: removable, stainless steel
Sheath: -
Notes: -BO-01SC006 -
Boker Magnum - Skeksis knife - 01SC008 - knife
Based on the Skeksis, fantastical creatures that mix characteristics of the bird of prey, reptile and dragon, this Magnum model is presented as an eccentric pocket knife with exceptional value for money. The ball-bearing, beak-shaped blade echoes the shape and efficiency of Skeksis, so that even complex cutting tasks are performed effortlessly.
The knife opens with both a flipper and thumb hole, while the stainless steel linerlock and grooves on the back of the blade provide good safety when working. Green G10 textured handles resemble reptile skin and provide a comfortable grip. Supplied with a lanyard hole and a point up clip.
Type of manufacture: industrial
Blade: 440 56HRC stainless steel
Blade treatment: -
Handle: G10
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Balance: -
Weight: 115g.
Closure: liner lock
Clip: stainless steel
Scabbard: -
Notes: -BO-01SC008 -
Spartan Blades - Poros knife - G10 Green - 154CM - SFL11GR - knife
The POROS flipper was designed by Curtis Iovito as a robust and large-sized flipper. The high grind lines of this blade, combined with a sharp and penetrating tip, make it a reliable companion for everyday carry.
Its quick flipper action is assisted by IKBS bearings for that "Snap" you're looking for! Its distinctive scallops are not only beautiful to look at but also ensure a secure grip. The deep pocket clip maintains a low profile while keeping your blade ready for use when needed. The blade is made of 154CM stainless steel with a black titanium nitride coating; the SS hardware and liner have a black electroplated powder coating.
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in 154CM stainless steel 58/60 HRC
Blade treatment: Black Titanium Nitride Coating
Handle: OD Green G10
Blade length: 89mm.
Blade thickness: 4mm.
Closed length: 97mm
Total length: 230mm.
Weight: 147g.
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos. Design: Curtis Iovito
Notes: The Field Grade series with Bronze-colored box identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFL11GR -
Spartan Blades - Astor by Les George - Carbon FIber & CTS-XHP - SFBL8CF - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: Composite made of G10 and Carbon Fiber
Blade Length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8CF -
Spartan Blades - Astor by Les George - Green G10 & CTS-XHP - SFBL8GR - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8GR -
BlackFox - Feresa by Grigorii Matveev - Green - BF-762OD - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: aluminum
Blade length: 83mm.
Blade thickness: 3mm.
Total length: 191mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-762OD -
BlackFox - Puck by Grigorii Matveev - OD Green G10 - BF-761OD - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: satin finish
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii MatveevBF-761OD -
Cold Steel - Luzon Black & OD Green - Medium Flipper - 20NQL-ODBK - knife
Intended Use: Sporting/Tactical
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: Black Tuff-Ex coating
Handle: GFN (Glass Filled Nylon)
Blade length: 102mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 229mm.
Weight: 101g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: removable, made of GFN (Glass Filled Nylon)
Packaging: cardboard box with Cold Steel logos
Notes: Carson Flipper opening systemCS20NQL-ODBK -
BlackFox - Nu-Bowie by Kean Alfaro - Green Micarta - BF-758MI - folding knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: micarta
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Clip: stainless steel, removable and reversible, deep pocket type
Closure: Button Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758MI -
Benchmade - Anonimus - CPM-CruWear - 539GY - knife
Take the new Anonimus into the woods by keeping it by your side and you'll be ready to take on any adventure!
This fixed blade survival knife is ideal for bushcrafting thanks to the CPM-CruWear steel blade that offers excellent cutting and edge-holding capabilities combined with a deliberately low-profile aesthetic thanks to the matte finish of the Cerakote blade and a black Boltaron sheath with additional loop for a fire stick.
Intended Use: Bushcraft / Hiking / UtilityProduction Type: Industrial
Country of Production: USA
Blade: Full tang tool steel CPM-CRUWEAR 63/65HRC
Blade Treatment: Tungsten Grey Cerakote
Handle: G10
Blade length: 127mm.
Blade thickness: 2.9mm.
Total length: 249mm.
Weight: 168g.
Sheath: made of Boltaron, injection molded polymer, with additional loop to accommodate a fire stick.
Packaging: cardboard box with Benchmade logos
Notes: -BM-539GY -
Benchmade - 945 Mini Osborne Reverse Tanto Green Aluminum - knife
Intended Use: Sporty/EDC
Production Type: Industrial
Country of Production: USA
Blade: Steel CPM-S30V 58/60HRC
Blade Finish: Satin finish
Handle: Aluminum 6061-T6 with green anodization and purple anodized spacers
Blade Length: 74mm.
Blade thickness: 2.7mm.
Length closed: 97.5mm.
Total length: 172mm.
Thickness when closed: 10mm.
Weight: 57g.
Closure: AXIS Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Design by Warren OsborneBM-945 -
MKM & Fox - Isonzo Clip Green by Vox - MK-FX03-3PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: N690Co 59 / 60HRC stainless steel
Blade treatment: Black Idroglider
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PGO -
MKM & Fox - Isonzo Cleaver Green by Vox - MK-FX03-2PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Black Idroglider
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PGO -
MKM & Fox - Isonzo Hawkbill Green by Vox - MK-FX03-1PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports / TacticalType of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Black
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PGO -
Fox - Libar SlipJoint knife - Green Micarta - FX-582 - Knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-582 -
Fox - Livri SlipJoint knife - Green Micarta - FX-273 - Knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-273 -
Cold Steel - Bush Ranger Lite Knife - Green GFN - 21A - knife
Intended use: sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Satin
Handle: GFN (Glass Filled Nylon)
Blade length: 89mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 147g.
Closing: Tri-Ad Lock with additional safety catch on the left handle
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Cold Steel logos
Notes: Design by Mike WallaceCS21A -
Mcusta - Rikyu Tea Ceremony Damascus - MC-0184D - knife
Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Note: Cordura sheath and leather12016 -
Mcusta - Shinari Shinra Maxima knife - SPG2 - PRIVATE COLLECTION - Green Pakka Wood - MC-0203G - knife
Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.
The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used, you can visit the website: www.collinisteel.com
AP-MC-0203G -
White River Knife & Tool - Small Game knife - Micarta Brown - WRSG - knife
Intended use: Hunting / Sports
Type of production: Artisan
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closure: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -WRS-G-M -
White River Knife & Tool - Hunter Olive Micarta knife - HNT-MOD - knife
Coltelleria Collini is the official distributor for Italy of White River Knife & Tool knives
Intended use: Hunting / Sports
Type of production: Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 109g.
Closing: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -WTHNT-MOD -
Mcusta - Shinari Shinra Maxima knife - SPG2 Powder Steel - Green Pakka Wood - MC-0203G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used you can view the site: www.collinisteel.com
MC-0203G -
White River Knife & Tool - Small Game knife - Micarta - WRSG - knife
Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives
Intended use: Hunting / Sports
Type of production: Artisan
Blade production: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closing: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -WRSG -
White River Knife & Tool - Caper - OD Green Micarta - knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 75mm.
Blade thickness: 3mm.
Total length: 175mm.
Balancing: Set back
Weight: 90g.
Sheath: in Kydex
Packaging: cardboard box with WRKT logos
Note: -6242OD -
Fox - Predator 2F - Nato Green - FX-446OD - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy - Maniago (PN)
Blade: Stainless steel N690Co 58 / 60HRC
Blade Treatment: Black Hidroglider
Handle: Forprene
Blade length: 90mm.
Blade thickness: 3 mm.
Closed Length: 120mm.
Overall length: 210mm.
Weight: 125g.
Lock: Liner Lock with secure additional
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Fox logos FKMD
Notes: -FX-446OD -
Tops - Mini Scandi 2.5 Neck Knife - TPMSK-BLM - knife
Use: Neck Knife / Light Utility
Production Type: Semi-Industrial
Production Lama USA
Blade: Full tang 1095 steel 58 / 60HRC
Treatment Blade: Black Traction Coating
Handle: Black Linen Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 155mm.
Thickness when folded: -
Balancing: -
Weight: 68g.
Closed: -
Clip: -
Sheath: Kydex, neck
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of authenticity and warranty12083 -
Mcusta - Tsuchi Green - MC-163D - knife
Mcusta - Tsuchi Green - MC-163D - knife
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Damascus steel rolled and hammered with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0163D -
Pohl Force - Bravo One - Tactical Version 1016 - Limited Edition - knife
Pohl Force - Bravo One - Tactical Version 1016 - Limited Edition - knife
This knife is designed for use at 360 °, thanks to its small size it is very versatile and lends itself to a wide variety of uses.
Intended use: Tactical Collection
Type of production: Industrial
Blade: 440C steel 59/60HRC
Treatment Blade: -
Handle: Zytel Green
Blade length: 83mm.
Blade thickness: 3mm.
Overall length: 193mm.
Thick when closed: 14mm
Balancing: 1cm back from the branch guard
Weight: 100g.
Closure: Back Lock
Case: Cordura
Packaging: cardboard box with logos Pohl Force
Notes: diction limited to 500 pieces numbered and certified production.
Ambidextrous knife. Inside the package is present the pin to be mounted to make the knife can be opened with one hand.
Even a small number of interesting and maintenance manual and technical explanation of the knife.Collini Cutlery is the official distributor for Italy of tactical knives Pohl Force
If you have a shop, and you want to market this product, please send us an e-mail to [email protected] and receive a list with the prices reserved for you
pohl1016 -
Lion Steel - Big Opera - Green G10 by Max - 8810GN - knife
Intended Use: Sport / Hunting / Gentleman
Type of production: Industrial
Production Blade: Italy
Blade: D2 steel
Treatment Blade: -
Handle: G10
Blade length: 88mm.
Blade thickness: 3mm.
Closed Length: 120mm.
Overall length: 210mm.
Thick when closed: 14mm.
Balancing: -
Weight: 120g.
Closure: Back Lock
Clip: -
Packaging: cardboard box with logos Lion Steel
Notes: Design by MaxLS-8810GN -
Maserin - Ram G10 Green - by Jean Marc Arnaud - 501/G10 knife
Design by Jean Marc Arnaud
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel 58HRC AUS8
Handle material: G10 Green
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: 95mm.
Total length: 165mm.
Thick when closed: 17mm.
Weight: 92g.
Lock: Liner Lock501/G10V -
Fox - Zero by Jens Anso - FRN Green - FX-305G - coltello
Destinazione d'uso: Caccia/Sportivo Tipo di produzione: Industriale Produzione Lama: Italia Lama: in acciaio inox N690Co Trattamento Lama: - Manicatura: Fiberglass Reinforced Nylon Lunghezza lama: 70mm. Spessore lama: 3mm. Lunghezza chiuso: - Lunghezza totale: 165mm. Spessore da chiuso: - Bilanciatura: - Peso: 60g. Chiusura: Back Lock Clip: Amovibile, in acciaio inox Fodero: - Confezione: scatola in cartone con loghi Fox FKMD Note: Design by Jens Anso10011 -
Case - BlackHorn Verde - coltello
W.R. Case & Sons Cutlery Company è stata creata a inizio secolo, in un tempo in cui i coltelli tascabili erano indispensabili tanto quanto un orologio. Nel corso degli anni l'azienda si è affermata come una azienda leader nel lancio sul mercato di materiali nuovi e design innovativi.
Le radici dell'azienda risalgono al 1889, quando dei fratelli intraprendenti, William Russell (W.R.), Jean, John e Andrew, nella famiglia Case iniziarono a vendere coltelli artigianali dal retro di un furgone nella parte settentrionale dello stato di New York. Nel gennaio 1900, i fratelli costituirono la Case Brothers Cutlery Company, fondando così il primo marchio di famiglia Case.
J.R. Case, che chiamò l'azienda con il nome del padre, W.R., costituì la W.R. Case & Sons nella forma in cui oggi è conosciuta. Quando nel 1905 l'azienda si trasferì a Bradford, Pennsylvania, i quattro fratelli Case avevano fatto dei loro marchi di famiglia i nomi più rispettabili della coltelleria in America.
All'inizio della prima guerra mondiale, il governo fece appello alla Case per la produzione di coltelli militari per i combattenti americani. Durante il volo della “Molly Brown” nel 1965, agli astronauti Gus Grissom e John Young utilizzarono coltelli Case speciali nella missione spaziale della NASA. Case ha raccolto ammiratori famosi e avidi collezionisti come l'ex Presidente americano, Dwight D. Eisenhower e la star della musica country, Randy Travis.
Coltello vintage prodotto dalla ditta americana Case nel 1991
Produttore: Case - USA
lunghezza totale aperto: 20,5 cm
lunghezza lama: 9 cm
peso: 108 gr
tipo acciaio: 440 inox
materiale impugnatura: gomma verde
note: fodero mimetico in Nylon7119