Last up date
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
Fox - Italico Sheepfoot - FX-540TIBL - M390 & Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Never used, but with three marks on titanium anodization.
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: 3 scratches on blue anodizing.
* Box: Present
* Scabbard: Pouch with zipper.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: M390 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel hardware
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm.
Weight: 95g.
Closure: FrameLock
Clip: flush, AISI 302 stainless steel, removable and reversible
Sheath: zippered pouch, leatherette
Packaging: cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540TIBL-CP -
Boker Magnum - Field Flipper - 01SC006 - knife
In everyday life or outside of it, the Magnum Field Flipper is an EDC knife for all occasions.
The pocket knife stands out above all by its tactically unobtrusive appearance. The black-coated 440A stainless steel blade and military green Micarta handle are attractive features. The blade opens smoothly with a ball-bearing flipper system or with a thumb pin on either side and closes reliably with a linerlock. Supplied with a lanyard hole and tip-up clip.
Type of manufacture: industrial
Blade: 440A 56HRC stainless steel
Blade finish: Teflon coated
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.8mm.
Total length: 183mm.
Weight: 108g.
Closure: liner lock
Clip: removable, stainless steel
Sheath: -
Notes: -BO-01SC006 -
Boker Plus - Undertow by Lorien Arnold - D2 & Black G10 - 01BO694 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: satin finish
Handle: Stainless steel and G10
Blade length: 87mm.
Blade thickness: 3.2mm.
Total length: 200mm.
Weight: 125g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: Design by Lorien Arnold - flipper opening system on ball bearingsBO-01BO694 -
Boker Magnum - Skruva knife - 01SC011 - knife
Loose screw? Far from it, because the Magnum Skruva (Swedish: screw) literally has a firm grip on everything. This is mainly due to the solid pivot screw, which forms the resting point for the ball-bearing 440A drop-point blade.
An attractive ricasso and discreet satin finish complete the visual appearance of the blade, while jimpings on the spine of the blade provide additional safety during tough cutting jobs.
The knife opens with the pinball machine; the liner lock closes the blade intuitively and reliably.
The handle is linear and ergonomic with non-slip cheeks made of light and textured G10, which guarantees an optimal grip even in the most adverse conditions.
Type of production: industrial
Blade: 440 56HRC stainless steel
Blade Treatment: -
Handle: G10
Blade length: 79mm.
Blade thickness: 2.7mm.
Closed length: 110mm.
Total length: 189mm.
Balancing: -
Weight: 100g.
Closure: liner lock
Clip: stainless steel
Sheath: -
Note: -BO-01SC011 -
Boker Magnum - Skeksis knife - 01SC008 - knife
Based on the Skeksis, fantastical creatures that mix characteristics of the bird of prey, reptile and dragon, this Magnum model is presented as an eccentric pocket knife with exceptional value for money. The ball-bearing, beak-shaped blade echoes the shape and efficiency of Skeksis, so that even complex cutting tasks are performed effortlessly.
The knife opens with both a flipper and thumb hole, while the stainless steel linerlock and grooves on the back of the blade provide good safety when working. Green G10 textured handles resemble reptile skin and provide a comfortable grip. Supplied with a lanyard hole and a point up clip.
Type of manufacture: industrial
Blade: 440 56HRC stainless steel
Blade treatment: -
Handle: G10
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Balance: -
Weight: 115g.
Closure: liner lock
Clip: stainless steel
Scabbard: -
Notes: -BO-01SC008 -
Fox - Italico Drop - FX-540OD - Black Top Shield N690Co & OD Green FRN - pocket knife
"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening systemFX-540OD -
Fox - Italico Drop - FX-540B - Black Top Shield N690Co & Black FRN - pocket knife
"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening systemFX-540B -
Boker Plus - Kwaiken American Tanto by Lucas Burnley - D2 & Black G10 - 01BO512 - knife
In the Kwaiken American Tanto, the Oregon knife designer combines elements of Japanese and American styles. The flipper opens the silk-smooth D2 Tanto blade and locks with the reliable linerlock. The Tanto blade features a straight back and a second curved cutting edge at the front that runs straight to the tip-ideal for precise cuts. The exclusive claim is emphasized by the lightweight G10 handle grips, which give the all-black knife a very distinctive and harmonious appearance.
The slim design and exclusive material make the Kwaiken a classy men's knife with a tactical touch. It comes with a high-quality nylon case for storage and a deep, removable carry tip-up clip.
Intended Use: Tactical/Sportsman
Production Type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: black coating
Handle: stainless steel and G10
Blade length: 90mm.
Blade thickness: 3.1mm.
Total length: 212mm.
Weight: 120g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: design by Lucas Burnley - flipper opening system on ball bearingsBO-01BO512 -
Spyderco - Domino - CTS-XHP & Cubic Check Carbon Fiber - C172CFTIP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDCProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearingsSC172CFTIP-CP -
Zero Tolerance - Sinkevich Folder - 0450BLUCF - Flipper Knife Blue CF - Knife
As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.
The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.
The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.
With a reversible clip for pocket carry and a lanyard hole. Made in the USA.
Intended use: EDC/Sport/Collection
Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearingsZT0450BLUCF -
CRKT - P.S.D. II (Particle. Separation. Device.) by Hammond - AUS-10 & Brown G10 - 7910 - knife
Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC7910 -
CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife
Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.
Intended Use: Tactical
Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC2606 -
MKM - Isonzo Hawkbill by Vox - M390 & Marble Carbon Fiber - FX03M-1CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-1CM -
MKM - Eclipse by Vox - Satin MagnaCut & Dark Stonewash Titanium - EL-GYBK - Knife
Eclipses indicate significant periods of change and transformation.
While a solar eclipse opens the portal to new beginnings and changes,
a lunar eclipse reveals energies that help us complete a journey or change course in some way...
Either way, follow the light beyond the darkness!
Intended Use: Sporty
Production type: Industrial
Country of manufacture: Italy
Blade: MagnaCut steel HRC 61/63
Blade treatment: Satin finish
Handle: Titanium Gr.5 Ti6AI4V Dask Stonewash
Blade length: 81mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 191mm.
Weight: 90g.
Closure: FrameLock
Clip: titanium, deep pocket, removable
Sheath: zippered nylon pouch
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VoxnaesMK-EL-GYBK -
MKM - Eclipse by Vox - Dark Stonewash MagnaCut & Purple Titanium - EL-PRBKD - Knife
Eclipses indicate significant periods of change and transformation.
While a solar eclipse opens the portal to new beginnings and changes,
a lunar eclipse reveals energies that help us complete a journey or change course in some way...
Either way, follow the light beyond the darkness!
Intended Use: Sporty
Production type: Industrial
Country of manufacture: Italy
Blade: MagnaCut steel HRC 61/63
Blade treatment: Dark Stonewashed
Handle: Titanium Gr.5 Ti6AI4V Dark Stonewashed with anodizing
Blade length: 81mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 191mm.
Weight: 90g.
Closure: FrameLock
Clip: anodized titanium, deep pocket, removable
Sheath: zippered nylon pouch
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VoxnaesMK-EL-PRBKD -
Spartan Blades - Poros knife - G10 Green - 154CM - SFL11GR - knife
The POROS flipper was designed by Curtis Iovito as a robust and large-sized flipper. The high grind lines of this blade, combined with a sharp and penetrating tip, make it a reliable companion for everyday carry.
Its quick flipper action is assisted by IKBS bearings for that "Snap" you're looking for! Its distinctive scallops are not only beautiful to look at but also ensure a secure grip. The deep pocket clip maintains a low profile while keeping your blade ready for use when needed. The blade is made of 154CM stainless steel with a black titanium nitride coating; the SS hardware and liner have a black electroplated powder coating.
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in 154CM stainless steel 58/60 HRC
Blade treatment: Black Titanium Nitride Coating
Handle: OD Green G10
Blade length: 89mm.
Blade thickness: 4mm.
Closed length: 97mm
Total length: 230mm.
Weight: 147g.
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos. Design: Curtis Iovito
Notes: The Field Grade series with Bronze-colored box identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFL11GR -
Maserin - Energy - Titanium Flipper Knife by Sergio Consoli - 406 - knife
Intended use: Collection / Sporting
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel 58/61HRC
Blade finish: satin
Handle: in titanium, with spacers and anodized titanium screws
Blade length: 105mm.
Blade thickness: 3.5mm.
Closed length: 130mm.
Total length: 230mm.
Thickness when closed: 9mm.
Weight: 110g.
Lock: Frame Lock with removable stainless steel flipper
Clip: in anodized titanium, carved from solid
Notes: Opening via Carson flipper system - Opening movement on ball bearings - Design by Sergio ConsoliMA-406 -
CRKT - Squid Compact by Lucas Burnley - 2485K - knife
This small knife is a big deal. The Squid is known as the perfect knife for everyday use, expertly combining simplicity, usability and performance.
Neither brash nor flashy, it is the humble handyman of the knife world: reliable, solid and extraordinarily capable. Now, renowned designer Lucas Burnley has reworked it into a smaller, nimbler version, the Squid Compact. This reasonably priced folding knife is for everyone.
* Assisted opening: The assisted flipper allows rapid blade opening.
* Smooth opening: The IKBS™ ball bearing system ensures maximum smoothness.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily
* Maximum control: Grooves on the back of the blade to ensure a secure and comfortable grip
* Maximum durability: Stainless steel handle withstands heavy use.
* Low profile: Pocket clip ensures safe carrying
* Accessory options: Hole for lanyard or key ring
Intended Use: EDC
Production type: Industrial
Country of manufacture: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: BlackWashed
Handle: BlackWashed stainless steel
Blade Length: 44mm.
Blade thickness: 2.6mm.
Length closed: 74mm.
Total length: 118mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS opening system on pinball-type bearings, spring preload assistedC2485K -
Kershaw - Frontrunner - KVT Flipper - 2039 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stainless steel and G10
Blade length: 74mm.
Blade thickness: 3.1mm.
Length closed: 109mm.
Total length: 183mm.
Thickness when closed: 13mm.
Weight: 119g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: FrameLock
Clip: deep pocket, stainless steel, removable
Packaging: cardboard box with Kershaw logos
Notes: Opening via Carson-flipper system on KVT ball bearingsK2039 -
Kershaw - Covalent - DuraLock KVT Flipper Knife - 2042 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: BlackWash
Handle: GRN (Glass Reinforced Nylon)
Blade length: 81mm.
Blade thickness: 2.7mm.
Length closed: 112mm.
Total length: 193mm.
Thickness when closed: 12.4mm.
Weight: 79g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening via carson-flipper system on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)K2042 -
Kershaw - Monitor - DuraLock KVT Flipper Knife - 2041 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Black Oxide
Handle: GRN (Glass Reinforced Nylon)
Blade length: 76mm.
Blade thickness: 2.3mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 12.4mm.
Weight: 77g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening via carson-flipper system on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)K2041 -
BlackFox - Argus by Grigorii Matveev - Zebrano Wood - BF-760W - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Satin finish
Handle: Zebrano wood
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 202mm.
Weight: 70g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper opening system - Design by Grigorii MatveevBF-760W -
BlackFox - Argus by Grigorii Matveev - Black G10 - BF-760 - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: G10
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 202mm.
Weight: 75g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper opening system - Design by Grigorii MatveevBF-760 -
BlackFox - Puck by Grigorii Matveev - Red G10 - BF-761R - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii MatveevBF-761R -
BlackFox - Puck by Grigorii Matveev - OD Green G10 - BF-761OD - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: satin finish
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii MatveevBF-761OD -
BlackFox - Puck by Grigorii Matveev - Black G10 - BF-761B - knife
Intended Use: EDC / Sporty
Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: satin finish
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii MatveevBF-761B -
Boker Plus - Suiseki knife - 01BO489 - D2 steel - folding knife
Escape from everyday life and find your inner soul: Suiseki is a meditative art form from Asia that presents expressive stones in a particularly effective way. The calming character emanates from the natural shape of the stones, ranging from abstract to impressive representations of landscapes, animals or plants.
Knife designer Darriel Caston expands the spiritual level with a steel and plastic creation and introduces the Boker Plus Suiseki, a compact everyday knife full of sweetness and energy.
With stoic calm, the ball-bearing D2 blade with a chisel grind cuts through the tasks of everyday life and relies on the sure grip of the stainless steel frame lock. Asceticism and function determine the shape of this pocket knife, which maintains a modern impulse with G10 scales.
Intended use: EDC / Sport
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin
Handle: G10
Blade length: 39mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 64g.
Clips: -
Closure: Frame lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Darriel CastonBO-01BO489 -
Zero Tolerance - Tim Galyean - Copper - Factory Special Series - ZT0022CU - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"ZT0022CU -
Cold Steel - Luzon Black & OD Green - Medium Flipper - 20NQL-ODBK - knife
Intended Use: Sporting/Tactical
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: Black Tuff-Ex coating
Handle: GFN (Glass Filled Nylon)
Blade length: 102mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 229mm.
Weight: 101g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: removable, made of GFN (Glass Filled Nylon)
Packaging: cardboard box with Cold Steel logos
Notes: Carson Flipper opening systemCS20NQL-ODBK -
BlackFox - Nu-Bowie by Kean Alfaro - Green Micarta - BF-758MI - folding knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: micarta
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Clip: stainless steel, removable and reversible, deep pocket type
Closure: Button Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758MI -
BlackFox - Nu-Bowie by Kean Alfaro - Black G10 - BF-758 - folding knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade finish: black coating
Handle: G10
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Locking system: Button Lock
Clip: stainless steel, removable and reversible, deep pocket type
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758 -
Boker Plus - Aphex Mini knife by Burnley - 01BO197 - folding knife
The modern Boker Plus Aphex Mini is the scaled-down version of the Boker Plus Collection 2020 designed by Lucas Burnley. The finely sharpened blade is made from VG-10 and comes with an impressive finish. Thanks to the ball bearings and pinball machine, the knife is particularly easy to open. The ergonomically shaped handle is three-dimensionally milled from titanium and decorated with a modern carbon fiber inlay.
Intended use: Collection
Type of production: Industrial
Country of production: Taiwan
Blade: in VG10 steel
Blade treatment: Satin
Handle: titanium with carbon fiber insert
Blade length: 78mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 96mm.
Weight: 78g.
Clip: titanium
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Notes: Design by BurnleyBO-01BO197 -
Zero Tolerance - ZT0990 knife - CPM 20CV - Carbon Fiber - knife
Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.
Intended use: Sports / Tactical / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearingsZT0990 -
Zero Tolerance - ZT0762 knife - CPM 20CV - Carbon Fiber - knife
Intended use: Sports / Tactical / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening systemZT0762 -
Fox - Italicus by ADG - FX-540G10OD - G10 OD Green - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade finishing: Satin finish
Handle: G10 with AISI 303 stainless steel bolts and screws
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm
Weight: 95g.
Closure: Liner Lock
Clip: wire, in stainless steel AISI 302, removable and reversible
Sheath: pouch with zipper, in cordura
Package: Cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540G10OD -
Fox - Italicus by ADG - FX-540NA - Natural Micarta - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade finish: Satin finish
Handle: micarta with AISI 303 stainless steel folders and screws
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm
Weight: 90g.
Closure: Liner Lock
Clip: wire, in stainless steel AISI 302, removable and reversible
Sheath: pouch with zipper, in cordura
Package: Cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540NA -
Boker Plus - Kyoto Flipper Black G10 - 01BO241 - folding knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: G10
Blade length: 61mm.
Blade thickness: 2.7mm.
Total length: 200mm.
Weight: 61g.
Clip: monolithic, titanium, removable
Closure: liner lock
Package: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearings.BO-01BO241 -
Fox - Italicus by ADG - FX-540TIB - PVD Stonewashed Titanium - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Acid Stone Washed
Handle: Acid Stone Washed Titanium with AISI 303 stainless steel screws
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm
Weight: 90g.
Closure: FrameLock
Clip: wire, in stainless steel AISI 302 with PVD treatment, removable and reversible
Scabbard: leatherette pouch with zipper
Package: Cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540TIB -
BlackFox - Pocket knife EDC - Black G10 - BF-752 - folding knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Steel 440C HRC 57-59
Blade treatment: stone washed
Handle: G10 with stainless steel frame lock
Blade length: 50mm.
Blade thickness: 3mm.
Total lenght: 115mm.
Weight: 70g.
Clip: Stainless steel, removable
Closure: FrameLock
Package: Cardboard box with BlackFox logos
Notes: -BF-752 -
BlackFox - Pocket knife EDC - OD Green G10 - BF-752OD - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Steel 440C HRC 57-59
Blade treatment: stone washed
Handle: G10 with stainless steel frame lock
Blade length: 50mm.
Blade thickness: 3mm.
Total lenght: 115mm.
Weight: 70g.
Clip: Stainless steel, removable
Closure: FrameLock
Package: Cardboard box with BlackFox logos
Notes: -BF-752OD -
Fox - Baby Core by Vox - FX-608TI - Acid Stonewashed Titanium - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Acid Stone Washed
Handle: Acid Stone Washed Titanium with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 110g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: wire, AISI 302 stainless steel, removable and reversible
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening systemFX-608TI -
Fox - Baby Core by Vox - FX-608CF - Carbon Fiber - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Satin
Handle: Carbon Fiber with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 60g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: wire, AISI 302 stainless steel, removable and reversible
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening systemFX-608CF -
Maserin - Ghost knife - Black G10 - 640 / G10N - knife
The collaboration with Alessandro Zanin continues who has thought of a special knife, Gost Tactical Folder. A light but robust folder, suitable for any use, but with a particular vocation for the CQB - CQC.
The use of the best materials guarantees excellent handling and agility, the excellent balance and the ergonomic study of the handle give an ideal grip with every grip.
The powerful blade instills safety and strength. Finally the knife adjusts to the hand and not vice versa, thus allowing movement and fluidity.Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 85mm.
Blade thickness: 3.2mm.
Closed length: 140mm.
Total length: 220mm.
Thick when closed: 16.4mm.
Weight: 225g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Alessandro ZaninMA-640/G10N -
Zero Tolerance - Flipper Frame Lock - Carbon Fiber - ZT0707 - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lockZT0707 -
MKM & Fox - Isonzo Hawkbill Gray by Vox - MK-FX03-1PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports / TacticalType of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PGY -
MKM & Fox - Isonzo Hawkbill Green by Vox - MK-FX03-1PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports / TacticalType of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Black
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PGO -
Fox - Baby Core by Vox - FX-608OR - Orange & Dark Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Dark Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608OR -
Fox - Baby Core knife by Vox - FX-608BL - Blue & Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608BL -
Fox - Baby Core by Vox - FX-608R - Red & Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608R -
Fox - Baby Core by Vox - FX-608B - Black & Dark Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Dark Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608B -
Kershaw - Tumbler Flipper by Sinkevich - 4038 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: in steel D2
Blade treatment: Stonewashed
Handle: G10 and Carbon Fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 187mm.
Thick when closed: 11mm.
Weight: 75g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closing: Sub Frame Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Notes: Design by SinkevichK4038 -
Zero Tolerance - SpeedSafe Flipper - BlackWash - ZT0357BW - knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper systemZT0357BW -
Zero Tolerance - SpeedSafe Flipper - Stone Washed - ZT0357 - knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: Stone Washed
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper systemZT0357 -
MKM & Viper - Timavo Flipper by Vox - Green Micarta - VP02-GC - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel and Green Canvas Micarta
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 110g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-GC -
Kershaw - Oblivion SpeedSafe Frame Flipper - 3860 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel with Stonewashed and G10 finish
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 206mm.
Thick when closed: 10.2mm.
Weight: 146g.
Opening: Carson Flipper system and SpeedSafe Assisted Opening
Washers: steel,
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Note: -K3860 -
Kershaw - Parsec Frame Flipper - 2035 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed Brown PVD
Handle: Stainless steel with Stonewashed Brown PVD finish
Blade length: 7.6mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 182mm.
Thick when closed: 10.2mm.
Weight: 99g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Frame Lock
Clip: stainless steel, removable and reversible, with PVD treatment
Packaging: Cardboard box with Kershaw logos
Note: -K2035 -
MKM - Isonzo Hawkbill knife black by Vox - MK-FX03-1PBK - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Black
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PBK -
Kershaw - Concierge Blackwash by Sinkevich - Flipper - 4020 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Blackwash
Handle: G10
Blade length: 83mm.
Blade thickness: 2.6mm.
Closed length: 108mm.
Total length: 184mm.
Thick when closed: 13.2mm.
Weight: 113g.
Opening: Carson Flipper system
Washers: in brass, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Kershaw logos
Notes: Design by SinkevichK4020 -
Maserin - Artiglio Flipper Knife - OD Green G10 - 420/G10V - Knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo Toncelli420/G10V -
Maserin - Artiglio Flipper Knife - Grey G10 - 420/G10G - Knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo Toncelli420/G10G -
Cold Steel - Bush Ranger Lite Knife - Green GFN - 21A - knife
Intended use: sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Satin
Handle: GFN (Glass Filled Nylon)
Blade length: 89mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 147g.
Closing: Tri-Ad Lock with additional safety catch on the left handle
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Cold Steel logos
Notes: Design by Mike WallaceCS21A -
Cold Steel - Luzon OD Green - Medium Flipper - 20NQL-ODBK - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: SK-5 carbon steel
Blade Finish: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 241mm.
Balance: backward
Weight: 142g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logosCS20NQL -
Maserin - Artiglio Flipper - Black G10 - 420/G10N - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo ToncelliMA-420/G10N -
Zero Tolerance - Tim Galyean knife - Flipper Carbon Fiber - ZT0022 - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper systemZT0022 -
ExtremaRatio - BD2 Lucky Desert knife - knife
Intended use: Tactical
Type of production: Industrial
Lama production: Italy
Blade: N690Co 58HRC stainless steel
Lama treatment: Satin
Handle: Anticorodal
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 128mm.
Total length: 224mm.
Thick when closed: 17mm.
Balancing: -
Weight: 104g.
Closure: Liner Lock
Clip: removable in stainless steel
Sheath: -
Packaging: cardboard box with Extrema Ratio logos
Note: -ER-BD2-DE -
ExtremaRatio - BF4 Lucky Black - knife
Intended use: Tactical
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 58HRC
Lama treatment: Testudo
Handle: Anticorodal
Blade length: 122mm.
Blade thickness: 3mm.
Length closed: 150mm.
Total length: 277mm.
Thick when closed: 17mm.
Balancing: -
Weight: 137g.
Closure: Liner Lock
Clip: removable in stainless steel
Sheath: -
Packaging: cardboard box with Extrema Ratio logos
Note: -ER-BD4-BK -
ExtremaRatio - BD4 Lucky Desert - knife
Intended use: Tactical
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 58HRC
Lama treatment: Satin
Handle: Anticorodal
Blade length: 122mm.
Blade thickness: 3mm.
Length closed: 150mm.
Total length: 277mm.
Thick when closed: 17mm.
Balancing: -
Weight: 137g.
Closure: Liner Lock
Clip: removable in stainless steel
Sheath: -
Packaging: cardboard box with Extrema Ratio logos
Note: -ER-BD4-DE -
Lionsteel - SR-22 - Bronze Titanium - SR22B - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: Sleipner 60 / 61HRC steel
Blade treatment: Satin
Handle: Single-piece titanium machined from solid and machined with numerical control
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 8.5mm.
Weight: 149g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearingsLS-SR22B -
Lionsteel - SR-22 - Gray Titanium - SR22G - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: Sleipner 60 / 61HRC steel
Blade treatment: Satin
Handle: Single-piece titanium machined from solid and machined with numerical control
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 8.5mm.
Weight: 149g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearingsLS-SR22G -
Fox - Rescue Karambit G10 UV Yellow - FX-599 RSY - Knife
Intended use: rescue / emergency
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Stonewashed
Grip: steel folders, G10 grips sensitive to UV rays
Blade length: 62mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 178mm.
Thick when closed: 13.3mm.
Weight: 112g.
Opening: Carson Flipper system / opening hole on the blade / opening simil emerson wave in pocket extraction
Washers: stainless steel, with ball bearings
Closure: Liner Lock, with additional manual safety
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Crasher on the front of the handle - quick-release carabiner in the rear ring - Phillips screwdriver on the upper guard branchFX-599RSY