Year 2022
-
Boker Plus - Pocket Bowie knife - D2 - 01BO508 - Knife
Bowie knives originated in the United States in the early 19th century and were considered reliable work knives, even occasionally used in combat. Typical of these fixed knives is the massive blade, with a characteristic design, usually more than 15 cm long and with a guard to protect the hand.
As a variant suitable for everyday use, the Chuck Gedraitis Boker Plus Pocket Bowie combines the fascination of the Bowie knife with the flexibility and compactness of a pocket knife. Equipped with a satin-finished Bowie blade made of D2, the three-finger knife easily copes with all day-to-day tasks.
The knife opens via the pull-out thumb stud, while the stainless steel linerlock reliably locks the blade in place.
The ergonomic handle with brown Burlap micarta scales promises a secure grip and gives the knife a touch of the Wild West.
The clip is beautifully integrated into the rear handle and allows tip-up carrying.
Supplied with a high quality nylon case.
Intended use: Hunting / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: D2 58HRC steel
Blade finish: Satin
Handle: micarta
Blade length: 70mm.
Blade thickness: 3mm.
Total length: 158mm.
Weight: 78g.
Sheath: clip
Packaging: cardboard box with Boker logos and nylon case
Note: -BO-01BO508 -
Cold Steel - Leatherneck Bowie - D2 Black - FX-LTHRNK - knife
Intended Use: Tactical / Heavy Duty
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Black Powder Coating
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: -CSFX-LTHRNK -
Boker - Sherman EDC knife 110665 - collection knife
The great success of the Boker M4 Sherman Damascus, due not only to the history of the historic Damascus steel but also to the design, prompted us to use this as the basis for a performing and pleasant EDC with a titanium framelock, which, despite the metallurgy of the blade powders, also carries a real piece of M4 Sherman Damascus.
For the blade of the Sherman EDC we used Magnacut for the first time, which is not without reason celebrated as a "miracle steel". Unlike the usually used tool steels, this steel was specially developed for the production of knives. The three desirable properties of a steel - edge retention, toughness and resistance to rust (stainless in the DIN category) - represent a conflict of goals. To make the steel resistant to rust, the addition of chromium is necessary, which makes the structure coarse, brittle and prone to fracture under normal conditions. The high hardness, which has a positive influence on the cutting life, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it was possible to achieve a very fine microstructure and thus a high toughness and shock load tolerance. The addition of nitrogen plays a central role here.
The central structural difference compared to the M4 Damascus model is the elegantly integrated flipper, which allows the blade to open smoothly with a small impulse.
A special highlight of the Boker Sherman EDC is the protruding Damascus backspacer, which is equipped with a lanyard hole in an elongated slot design. The Damascus of the backspacer was forged from various materials from Chad Nichols' M4 Sherman tank production in the Customized Ladder pattern and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman.
Intended use: Collection
Type of production: Industrial
Country of production: Germany
Blade: MagnaCut steel
Handle: in steel and micarta
Blade length: 75mm.
Blade thickness: 3mm.
Total length: 178mm.
Weight: 95g.
Clip: stainless steel
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: Certificate of Guarantee - Case in gray boxBO-110665 -
ExtremaRatio - K1 Dobermann knife - XXV Anniversary - Limited Edition
This special edition in 250 pieces, proposed on the occasion of the 25th anniversary of the brand, maintains the shape of the original, but with materials and finishes corresponding to the current production.
The K1 is equipped with a modified spear point profile blade, characterized by a tip that combines the 40° "tanto" profile with the more traditional European one, creating a sharp but very solid hybrid which, with the false false edge, makes it particularly effective in jab. The bevel is high, allowing for a very effective cutting angle.
The blade is immediately recognizable by the fenestration at the heel, which allows for considerable lightening without compromising its strength. It is made of Böhler N690 steel, with heat treatments that bring its hardness to 58 HRC for the best combination of edge hold and resistance. The finish is satin with flat grinding.
The handle, in anodized Anticorodal alloy, compared to the original presents the lightening on the sides that make the Extrema Ratio knives immediately distinguishable, but maintains the arched shape and the lateral "bellies" of the K1, offering an excellent grip both in the "saber" than in the "reverse" grip.
The terminal part of the handle curves to form a sort of hook which allows particularly easy and rapid extraction from the scabbard, while the tang protrudes from it with a triangular cusp which acts as a glass breaker with a slot which allows the knife to be equipped of lasso.
The leather scabbard faithfully reproduces the original while maintaining both the qualities of ease and speed of extraction. The carry can take place in an upside-down axillary position, horizontally on the belt or tactically on the thigh.
The K1 equipment is completed with a polypropylene case , complete leather sheath and underarm shoulder strap.
WEIGHT g.: 493
WEIGHT OZ.: 17.39
BLADE LENGTH (MM): 210
BLADE LENGTH (IN): 8.26
TOTAL LENGTH (MM): 351
TOTAL LENGTH (IN): 13.81
BLADE THICKNESS (MM): 6.3
BLADE THICKNESS (IN): 0.25
BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)
BLADE FINISH: SATIN
BLADE GRINDING: FLAT EDGE
HANDLE MATERIAL: ANODIZED ANTICORODAL ALUMINUMER-K1-D-LE -
Boker Plus - Urban Texas Tooth Pick Flipper - 01BO388 - folding knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel VG10
Blade treatment: satin finish
Handle: G10
Blade length: 84mm.
Blade thickness: 2.5mm.
Total length: 191mm.
Weight: 43g.
Clip: stainless steel, machined from solid, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: -BO-01BO388 -
Cold Steel - Leatherneck Bowie - Lynn Thompson Limited Edition - 39LSFCAA - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: Limited and numbered edition with serial number engraved on blade and with Lynn Thompson's autograph on boxCS39LSFCAA -
Cold Steel - Engage Knife - 2.5" Clip Point Atlas Lock - FL-25DPLC - knife
Intended Use: Sporting / Utility
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade finish: Stonewashed
Handle: GFN (nylon and fiberglass)
Blade length: 63mm.
Blade thickness: 2.5mm.
Total length: 152mm.
Weight: 62g.
Closure: Atlas Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -CS-FL-25DPLC -
Boker Plus - Gem Damast Flipper - 01BO358DAM - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: 110-layer stainless damascus steel
Blade treatment:-
Handle:stainless damascus steel
Blade length: 64mm.
Blade thickness: 2mm.
Total length: 141mm.
Weight:40g.
Clip:stainless damascus steel, removable
Closure: FrameLock with stainless steel clapper
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearingsBO-01BO358DAM -
Boker Plus - Cataclyst Damast Flipper - Green Micarta - 01BO478DAM - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: 110-layer stainless damascus steel
Blade treatment: satin finish
Handle: Titanium
Blade length: 78mm.
Blade thickness: 3.8mm.
Total length: 173mm.
Weight: 76g.
Clip: stainless steel, removable
Closure: FrameLock with stainless steel clapper
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearingsBO-01BO478DAM -
BlackFox - Argus by Grigorii Matveev - Zebrano Wood - BF-760W - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Satin finish
Handle: Zebrano wood
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 202mm.
Weight: 70g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper opening system - Design by Grigorii MatveevBF-760W -
BlackFox - Argus by Grigorii Matveev - Black G10 - BF-760 - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: G10
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 202mm.
Weight: 75g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper opening system - Design by Grigorii MatveevBF-760 -
BlackFox - Puck by Grigorii Matveev - Red G10 - BF-761R - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii MatveevBF-761R -
BlackFox - Puck by Grigorii Matveev - OD Green G10 - BF-761OD - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: satin finish
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii MatveevBF-761OD -
Zero Tolerance - Tim Galyean - Copper - Factory Special Series - ZT0022CU - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"ZT0022CU -
Maserin - AM22 by Attilio Morotti - red maple burl - 923/RR - knife
The collaboration with Attilio Morotti returns for the creation of this elegant knife of small size but with high strength thanks to the use of top-quality Swedish steel and expert craftsmanship finish. Useful on any occasion and convenient to carry at all times thanks to its magnetic leather sheath made in Italy.
Intended Use: Hunting/Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in Sandvik 14C28N stainless steel
Blade treatment: Satin finish, with rounded edges
Handle: Stabilized maple burl
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 151mm.
Weight: 56g.
Scabbard: pocket, leather, with magnetic clasp (no belt loops/hooks)
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio MorottiMA-923/RR -
Maserin - AM22 by Attilio Morotti - Radica Blu - 923/RB - knife
The collaboration with Attilio Morotti returns for the realization of this elegant knife of small size but with high strength thanks to the use of Swedish steel of excellent quality and skillful craftsmanship finish. Useful on any occasion and convenient to carry at all times thanks to its magnetic leather sheath made in Italy.
Intended Use: Hunting/Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in Sandvik 14C28N stainless steel
Blade treatment: Satin finish, with rounded edges
Handle: Stabilized maple burl
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 151mm.
Weight: 56g.
Scabbard: pocket, leather, with magnetic clasp (no belt loops/hooks)
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio MorottiMA-923/RB -
Cold Steel - Luzon Black & OD Green - Medium Flipper - 20NQL-ODBK - knife
Intended Use: Sporting/Tactical
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: Black Tuff-Ex coating
Handle: GFN (Glass Filled Nylon)
Blade length: 102mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 229mm.
Weight: 101g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: removable, made of GFN (Glass Filled Nylon)
Packaging: cardboard box with Cold Steel logos
Notes: Carson Flipper opening systemCS20NQL-ODBK -
Cold Steel - SRK Compact OD Green - Survival Rescue Knife - 49LCKD-ODBK - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: SK-5 carbon steel
Blade finish: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 241mm.
Balance: backward
Weight: 142g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logosCS49LCKD-ODBK -
Cold Steel - SRK Compact Tan - Survival Rescue Knife - 49LCKD-DTBK - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: SK-5 carbon steel
Blade finish: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 241mm.
Balance: backward
Weight: 142g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logosCS49LCKD-DTBK -
Benchmade - Taggedout knife 15535 - CPM-154 - Axis Lock Knife - knife
Taggedout, knife inspired by the Bugout line, light, perfect for hunters who travel long distances or outdoor enthusiasts. When you go far with a kit on your back, every gram of weight carried counts. This light and thin hunting folder can handle any activity while you are in the wild, from preparing food to the field to skinning to paracord cutting. Lightweight, highly visible, slim in your pocket and with a razor sharp cut thanks to CPM-154 steel.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: USA
Blade: CPM-154 (58-61 HRC)
Blade finish: Satin finish
Handle: Grivory
Blade length: 99mm.
Blade thickness: 2.3mm.
Closed length: 116mm.
Total length: 206mm.
Thick when closed: 12.5mm
Weight: 59.5g.
Closure: Axis Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Note: -BM-15535 -
Benchmade - Mini Crooked River - 15085-2201 - Limited Edition Bull Elk - coltello
15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.
ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!
Intended Use: Collection / Hunting
Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey UnderwoodBM-15085-2201 -
Benchmade - Mini Crooked River - 15085-2203 - Limited Edition Mallard Duck - knife
15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.
ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!
Intended Use: Collection / Hunting
Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey UnderwoodBM-15085-2203 -
Benchmade - Mini Crooked River - 15085-2202 - Limited Edition Whitetail Deer - knife
15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.
ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!
Intended Use: Collection / Hunting
Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey UnderwoodBM-15085-2202 -
Benchmade - Mini Crooked River - 15085-2204 - Limited Edition Ringneck Phesant - knife
15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.
ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!
Intended Use: Collection / Hunting
Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey UnderwoodBM-15085-2204 -
Cold Steel - Engage 3.5" Clip Point - S35VN Atlas Lock - FL-35DPLC - knife
Designed as an everyday companion for heavy-duty use, Engage is an easy-to-carry knife with a wide 3.5-inch S35VN stainless steel blade for superior strength and edge retention. Featuring Cold Steel's Atlas™ lock that provides a consistent, durable and reliable lock; fully ambidextrous and able to handle any task. The easy-to-grip G-10 handle is built to be durable, and the satin-finished clip blade allows for precise and effective cutting.
Intended Use: Sporting/Utility
Production type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S35VN
Blade Finish: Satin finish
Handle: G-10
Blade length: 89mm.
Blade thickness: 3.8mm.
Total length: 221mm.
Weight: 187g.
Closure: Atlas Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -CSFL35DPLC -
Benchmade - 317 Weekender - S30V Grey G10 - utility knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Satin finish
Handle: Green Cavnas Micarta
Blade Length: 71mm. / 50mm.
Blade thickness: 2.3mm.
Length closed: 97.8mm.
Total length: 179mm. / 169mm.
Thickness when closed: 10mm.
Weight: 65g.
Closure: Slipjoint
Clip: -
Packaging: Cardboard box with Benchmade logos
Notes: Double blade and bottle opener / capsule lever toolBM-317 -
Benchmade - 317-1 Weekender knife - S30V Green Canvas Micarta - multipurpose knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Satin finish
Handle: Green Cavnas Micarta
Blade length: 71mm. / 50mm.
Blade thickness: 2.3mm.
Length closed: 97.8mm.
Total length: 179mm. / 169mm.
Thickness when closed: 10mm.
Weight: 65g.
Closure: Slipjoint
Clip: -
Packaging: Cardboard box with Benchmade logos
Notes: Double blade and bottle opener / capsule lever toolBM-317-1 -
BlackFox - Nu-Bowie by Kean Alfaro - Green Micarta - BF-758MI - folding knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: micarta
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Clip: stainless steel, removable and reversible, deep pocket type
Closure: Button Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758MI -
BlackFox - Nu-Bowie by Kean Alfaro - Black G10 - BF-758 - folding knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade finish: black coating
Handle: G10
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Locking system: Button Lock
Clip: stainless steel, removable and reversible, deep pocket type
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758 -
Cold Steel - Razor Tek 6.5" - Black GFN - FX-65RZR - Knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: full tang, stainless steel 1.4116
Blade finish: satin finish
Handle: GFN
Blade length: 165mm.
Blade thickness: 5mm.
Total length: 298mm.
Weight: 330g.
Sheath: Secure-Ex® thermoplastic material
Packaging: cardboard box with Cold Steel logos
Notes: -CSFX-65RZR -
Ontario Knife Company - Spec Plus SP-2 Survival Knife - 8680 - knife
Intended Use: Survival / Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder coating
Handle: kraton
Blade length: 140mm.
Blade thickness: 4.5mm.
Total length: 269mm.
Balancing: advanced
Weight: 255g.
Scabbard: Belt, nylon, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -ON8680 -
Boker Plus - Vox G10 field knife - 01BO375 - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: black
Handle: G10
Blade length: 86mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 201mm.
Weight: 145 g.
Clip: in stainless steel, with gold anodizing
Closure: lining lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Note: design by Jesper VoxnaesBO-01BO375 -
BlackFox - Arrow Fixed by Tommaso Rumici - BF-753 - knife
Intended Use: EDC / Utility / Tactical/
Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 71g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso RumiciBF-753 -
Pohl Force - Compact One SW - D2 steel - 6021 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive, classic Bowie blade of the Compact One, which is 88 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.
The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact One SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 88mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6021 -
Cold Steel - SR1 Clip Point knife - S35VN - 62L OD Green G10 - folding knife
The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.
It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!
The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel
A good blade needs a good grip, so this model of the SR1 is made from G10.
For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Satin
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62L -
Boker Plus - Papillon Trainer Bali - 01BO352 - training knife
Intended Use: Training
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 420
Blade Finish: Stonewashed
Handle: Stainless steel
Blade Length: 114mm.
Blade thickness: 3.7mm.
Length closed: 138mm.
Total length: 252mm.
Weight: 124g.
Closure: T-latch
Clip: -
Package: Cardboard box with Boker Plus logos
Notes: -BO-01BO352 -
Boker - Tiger Damascus knife - 111103DAM - folding knife
Boker Tiger-Damascus adds a very special model to the series of pocket knives steeped in history. Collector's knife with a historical past, a true piece of living history, which combines high quality craftsmanship with authentic materials. Known worldwide as the Tiger, the Panzerkampfwagen VI was used by the Wehrmacht from the late summer of 1942. It is considered to be one of the most famous tanks in history, despite its modest production number of only 1350 units and consequent low importance. strategic. The development of the heavy tank can be traced back to 1937 and series production began in August 1942. Today there are only seven units preserved, on display worldwide.
The tank parts used for the knife blade come from a Tiger I of the Schwere Panzerabteilung 502, which was destroyed in combat in Latvia in the summer of 1944 in a wooded area near the town of Bauska. Based on the wreck found at the original excavation site, it was determined that this Tiger was one of the first models produced.
The straight-cut Boker Tiger-Damascus features a unique Damascus blade made from the steel from the tank destroyed in Bauska. The non-stainless damask mosaic is hand-forged by Chad Nichols and resembles the tank tracks left in the ground by the Tiger's heavy tracks. Unlike conventional damask, damask mosaic production does not create layers, but complex damask bars are hand forged into a mosaic with an elaborate and very complicated process. The blade operates on ball bearings and is locked open by a sturdy steel framelock with stonewash finish.
The overall shape of the knife pays homage to the famous lines of the tank, while the decorative pin screw is modeled on the main drive pinion.
The slightly shaped micarta canvas handle scales feature precisely milled grooves, reminiscent of the characteristic surface texture of the Zimmerit coating of German armored vehicles.
Intended use: Collection
Type of production: Industrial
Country of production: Germany
Blade: Damascus steel from pieces of the Tiger
Handle: in steel and micarta
Blade length: 85mm.
Blade thickness: 3.6mm.
Total length: 198mm.
Weight: 141g.
Clip: in stainless steel
Closure: Frame Lock
Packaging: PVC display case that lets the knife "float" inside, making it visible from all sides
Notes: Certificate of Guarantee - Gray cotton caseBO-111103DAM -
Ka-Bar - Mini Dozier Folding Hunter knife 4072ZG - Zombie Green - knife
Intended use: tactical
Blade: AUS 8A stainless steel
Handle: Zytel
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed length: 87mm.
Total length: 147mm.
Balancing:
Weight: 22g.
Closure: back lock
Opening: -
Clip: in steel
Design: by Bob DozierProduction: Taiwan
The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-4072ZG -
Cold Steel - SR1 Lite knife - 62K1 - folding knife
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62K1 -
Boker Plus - Cataclyst Flipjoint Knife - 01BO675 - folding knife
The Boker Plus Cataclyst Flipjoint features a flipper opening blade, it does not lock when open, but is simply held securely in place by a retaining ball. With appropriate pressure on the back of the blade, the blade can be folded back without releasing a locking device.
The sleek design features a textured black G10 grip that is three-dimensionally milled and has a weight-saving recess inside. Supplied with a deep pocket clip and a drawstring hole.
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: satin finish
Handle: steel and G10
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 173mm.
Weight: 77g.
Clip: monolithic, removable
Closure: slipjoint
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearingsBO-01BO675 -
Laguiole En Aubrac - raw buffalo horn - knife
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: raw buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 72 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512CBI/FSI1 -
La Cantina - Little Jones PVD custom knife - Sleipner Steel - Black Birch and Fatcarbon - handmade knife
Type of production: Artisan
Country of production: Italy
Blade: 60HRC Sleipner Steel
Blade Finish: PVD
Handle: Black Stabilised Birch with FatCarbon Darkmatter guard and carbon pins
Blade length: 150mm.
Blade thickness: 6mm.
Total length: 294mm.
Balance: on the guard branch
Weight: 360g.
Scabbard: hand worked and sewn leather
Packaging and certificate: Cordura pouch and certificate of authenticity
Notes: unique knife handcrafted for Coltelleria Collini in Busto Arsizio - no. 256LC-LJ-FCG -
Laguiole En Aubrac - Horn point - spring engraved with Maltese cross - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Maltese cross symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Stainless steel 12C27
Blade production: France
Handle: Blond cow horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -LEA-croce-m -
Laguiole En Aubrac - Horn Point - spring engraved with Pilgrim's Shell - VG10 in Sanmai - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Pilgrim's shell symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
The blade uses 67-layer Japanese VG10 rolled steel, manufactured by Takefu Steel.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Damascus and Japanese VG10 rolled steel
Blade production: France
Handle: Blond Cowhorn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -aubrac-conchiglia -
Laguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife
These high quality knives, are handcrafted in the tradition of French Thiers cutlery.
This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.
The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.
The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly.
The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs.
The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.
Intended Use: Regional/Collection/Outdoor/Hunting
Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0514EBI -
TOPS Knives - M-PAT Tactical by Seth Brown - MPAT-01 - knife
The M-PAT was created by U.S. military service member Seth Brown and was designed specifically for fighter jet crews. Its slim profile and sturdy size are designed it specifically so that it can be carried on the safety vest or otherwise at the top of the torso in order to cause as little discomfort as possible while in the flight deck. It is ideal for vertical carrying and, thanks to the two retention modes of the sheath, it will not go anywhere until you need it. The M-PAT's applications extend outside the cockpit and it is perfectly suited to a belt or tactical vest. It is always handy when you need it and out of the way when you don't. When you only have room for one knife for self-defense and survival, there's the M-PAT.
Intended Use: Tactical/Military
Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Coyote Tan Coating
Handle: Canvas Micarta
Blade Length: 124mm.
Blade thickness: 4.8mm.
Total Length: 248mm.
Balance: on the guard branch
Weight: 309g.
Sheath: kydex
Packaging: transparent plastic bag
Notes: Emergency whistle - Design by Seth BrownMPAT-01 -
La Cantina - Little Jones custom knife - Sleipner Steel - Ironwood and Fatcarbon - handcrafted knife
Type of production: Artisanal
Blade production: Italy
Blade: Sleipner steel at 60HRC
Blade finish: satin
Handle: Ironwood with FatCarbon Darkmatter guard and carbon pins
Blade length: 150mm.
Blade thickness: 6mm.
Total length: 294mm.
Balancing: on the guard branch
Weight: 345g.
Sheath: in worked and hand-stitched leather
Packaging and certificate: cordura case and certificate of authenticity
Notes: unique knife handcrafted for Collini Cutlery in Busto Arsizio - n. 257LC-LJ-IF-1 -
La Cantina - Little Jones custom knife - Sleipner Steel - Light Birch and Fatcarbon - handmade knife
Type of production: Artisanal
Blade production: Italy
Blade: Sleipner steel at 60HRC
Blade finish: PVD
Handle: Light Stabilized Birch with FatCarbon Darkmatter guard and carbon pins
Blade length: 150mm.
Blade thickness: 6mm.
Total length: 294mm.
Balancing: on the guard branch
Weight: 360g.
Sheath: in worked and hand-stitched leather
Packaging and certificate: cordura case and certificate of authenticity
Notes: unique knife handcrafted for Collini Cutlery in Busto Arsizio - n. 255LC-LJ-BCF -
Boker Plus - Pilot Knife by Dave Wenger - 02BO074 - fixed knife
Intended Use: Military / Light Utility
Production type: Industrial
Country of Production: Taiwan
Blade: Full Tang Tool Steel D2
Blade Finish: Powder Coating
Handle: G10
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 260mm.
Weight: 260g.
Sheath: kydex
Packaging: cardboard box with Boker Plus logos
Notes: design by Dave WengerBO-02BO074 -
BlackFox - Puck by Grigorii Matveev - Black G10 - BF-761B - knife
Intended Use: EDC / Sporty
Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: satin finish
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii MatveevBF-761B -
Boker - Vintage 523 Briarwood - PRIVATE COLLECTION - knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: very good, mirror polished blade with a few slight surface marks (visible against the light) from being inserted in the sheath - a few dots of oxidation on brass guard and pommel
* Commercially available Out of production
* Sharpening: Original edge
* Marks on blade: yes, light and superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good condition
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratoryIntended Use: Utility/Hunting
Production type: Industrial
Country of manufacture: Germany - Solingen
Blade: Stainless steel 440C
Blade finish: Mirror polished
Handle: Briar
Blade length: 123mm. (edge 112mm.)
Blade thickness: 4.4mm.
Total length: 230mm.
Weight: 162g.
Sheath: leather
Packaging: -
Notes: -AP-BOK-VIN -
Quartermaster - QSE-5 Mr. Roper - Limited Edition - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2014, limited edition made of only 300 pieces.
* Sharpening: Factory sharpened, improvable
* Marks on blade: None
* Marks on handle: Very small abrasions on titanium and hardware.
* Box: Present - Original
* Scabbard: Present - Original.
* Manuals, Certificates and Warranties: Certificate with date of manufacture, serial number and signature.
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: sintered stainless steel CPM-154CM
Blade Finish: Stone Washed
Handle: Microblasted Titanium
Blade Length: 76mm.
Blade thickness: 4.7mm.
Total length: 190mm.
Thickness when closed: 12mm.
Weight: 115g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Quartermaster logos
Notes: Knife withdrawn from a private collection, previously purchased - Limited edition specimen of only 300, individually numbered on blade and box (knife number #159)QTR-QSE5-CP -
Marttiini - Lapinleuku 120 Lapp knife 12cm - PRIVATE COLLECTION - Knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition, it has some small marks on the blade from the years
* Available on the market: no longer in production, difficult to find, dating back to the 90s
* Sharpening: Original
* Marks on the blade: small scratches
* Marks on the handle: no
* Box: without box
* Sheath: in original brown leather
* Manuals, Certificates and Warranties: absent
* Checked and certified by our internal laboratoryIntended use: hunting
Intended use: collection
Type of production: artisanal
Blade: Sandvik 12C27 stainless steel
Blade treatment: mirror polishing with handcrafted engravings
Production Lama: Finland
Handle: birch burl
Blade length: 120mm
Blade thickness: 2.5mm
Closed Length: -
Total length: 235mm
Balancing: -
Weight: 150g
Closure: -
Clip: -
Sheath: leather sheath with handcrafted engravings
Note:MAR-LAPP12 -
Helle Norway - Vintage Fabrikker Norway knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition, it has some marks on the blade from the years
* Available on the market: no longer in production, difficult to find, dating back to the 90s
* Sharpening: Original
* Marks on the blade: small scratches
* Marks on the handle: no
* Box: without box
* Sheath: in brown leather
* Manuals, Certificates and Warranties: absent
* Checked and certified by our internal laboratoryIntended use: hunting
Type of production: industrial
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: leather discs
Blade length: 150mm.
Blade thickness: 2.5mm.
Closed Length: -
Total length: 270mm.
Balance: set back to 2.5cm
Weight: 220g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-FAB -
Ka-Bar - 6417 Red Spacer knife - 1095 steel - Special Edition - coltello
Il Red Spacer KA-BAR è probabilmente il coltello KA-BAR più collezionabile realizzato durante la seconda guerra mondiale. Il distintivo distanziatore rosso presente sotto la guardia ha attirato l'attenzione dei collezionisti per decenni. Sebbene gli originali siano rari e costosi, il laboratorio State & Union di KA-BAR - che si occupa delle realizzazioni custom - ha realizzato un piccolo lotto di questo iconico coltello.
Le rondelle in pelle sono modellate a mano per creare un aspetto invecchiato. Il fondello e la guardia sono lavorate artigianalmente per replicare le forme e le dimensioni dell'originale.
Ogni distanziatore rosso è fatto a mano per essere leggermente più lungo dell'attuale distanziatore utilizzato sui coltelli da combattimento/utilità KA-BAR. La lama viene sabbiata, quindi trattata a freddo.
Il fodero subisce un processo di invecchiamento per scurire la pelle e far corrispondere il colore del fodero originale.
Destinazione d'uso: Tattico/Militare
Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 290mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: -La Coltelleria Collini di Busto Arsizio è distributore ufficiale per l'Italia del marchio KA-BAR
KB-6417 -
Carl Schlieper - Survival Companion Knife - Vintage - PRIVATE COLLECTION - knife
Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to the 80s
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:-
* Sheath: in leather
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratoryCarl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included freehand knives, tools and razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Intended use: Collection / Survival
Type of production: industrial
Blade: 440A Ice Tempered stainless steel
Country of production: Germany
Handle: brass, coated with synthetic material, hollow inside (useful space approx. 50mm. X 14mm.) With screw cap
Blade length: 185mm. (length of serration on the back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balancing: on the guard
Weight: 400g.
Sheath: in leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in excellent conditionCS-SCK-CP-1 -
SOG - The Tomcat knife - Large - PRIVATE COLLECTION - knife
The SOG Tomcat is one of SOG's largest folding knives. It features a 5mm thick blade, making it a heavy-duty folding knife, and while it weighs more than the average folding knife, it will withstand heavy use. The SOG Tomcat also won the "Overall Knife of the Year" award in 1988, one of the company's first awards, for its outstanding design.
It is one of the most collected SOG folding knives
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, in production between 1986 and 2002
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: Yes, original, in perfect condition
* Sheath: original in cordura
* Manuals, Certificates and Warranties: present in the package
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Industrial
Production Lama: Japan
Blade: 440C stainless steel
Blade treatment: -
Handle: Stainless steel and Kraton
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 216g.
Closure: back-Lock
Clip: -
Sheath: Nylon
Packaging: Cardboard box with SOG logos
Note:AP-TOM-SOG -
Puma - Back Packer 465 knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, model dating back to the 90s
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: without box
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory
Intended use: Collection / VintageType of production: artisanal
Country of production: Germany
Blade: stainless steel
Blade finish: satin finish
Handle: ABS with metal parts
Blade length: 80mm.
Blade thickness: 2.5mm.
Total length: 185mm.
Balancing: backward
Weight: 130g.
Sheath: -
Packaging: -
Notes: Vintage 90s knifePU-BP465 -
Buck - General knife 120 - COLLECTION PRIVÉE - couteau vintage 90
COUTEAU DE RETRAITE PROVENANT D'UNE COLLECTION PRIVÉE - Modèle Buck 120 datant des années 90
* Type : déjà acheté
* Etat : en excellent état, comme neuf
* Disponible dans le commerce : disponible dans le commerce dans les versions les plus récentes
* Affûtage : Original
* Marques sur la lame : non
* Marques sur le manche : non
* Boîte : sans boîte
* Gaine : gaine en cuir noir d'origine
* Manuels, certificats et garanties : -
* Contrôlé et certifié par notre laboratoire interne
Utilisation prévue : TactiqueType de production : Industrielle
Production Lama : États-Unis
Lame : acier inoxydable 420HC
Traitement de la lame : -
Manche : en Polymères
Longueur de la lame : 185 mm.
Épaisseur de la lame : 4,5 mm.
Longueur fermée : -
Longueur totale : 300 mm.
Epaisse fermée : -
Équilibrage : -
Poids : 228 grammes.
Fermeture: -
Agrafe: -
Fourreau : en cuir noir
Emballage: -
Noter: -AP-BUCK-120 -
FOX - Team Survival knife by Paolo Bozzo - PRIVATE COLLECTION - FKMD FX-STF3 - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Typology: withdrawn by private individual
* Condition: in excellent condition
* Available on the market: discontinued since 2015
* Sharpening: factory sharpening
* Marks on the blade: small marks on the tip caused by the extraction from the sheath
* Marks on the handle: no marks
* Box: original Fox box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria ColliniST3-F is a knife studied and designed by the head instructor Paolo Bozzo of TEAM SURVIVAL (survival and survival school).
This project was developed through years of direct experience in the field.Intended use: Survival / Utlity
Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: Black Teflon
Handle: Green Canvas Micarta
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 360mm.
Balance: Advanced to 2.5cm. from the guard branch
Weight: 552g.
Sheath: in cordura with molle attachments
Packaging: cardboard box with Fox logos
Notes: designed by Paolo BozzoAP-FX-STF3 -
Fox - Miles knife - Heavy Duty - PRIVATE COLLECTION - FX-0171104 - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Typology: withdrawn by private individual
* Condition: in like new condition
* Commercially available: discontinued from 2021
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: without box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini
Intended use: TacticalType of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade Treatment: Titanium Nitriding
Handle: Forprene
Blade length: 135mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 275mm.
Thick when closed: -
Balancing: -
Weight: 280g.
Closure: -
Clip: -
Sheath: Kydex and Cordura
Packaging: -
Note: -AP-0171104 -
Jim Burke - RockStar Titanium Folder - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available in hard-to-find trade.
* Sharpening: Original
* Marks on blade: no
* Marks on handle: small abrasions on clip.
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / Collection
Type of production: Midtech (semi-industrial)
Country of manufacture: USA
Blade: Stainless steel CPM-154CM
Blade treatment: Dual tone: stonewashed and satin-finished
Handle: stonewashed titanium
Blade length: 80mm.
Blade thickness: 3.2mm.
Length closed: 112mm.
Total length: 195mm.
Thickness when closed: 10mm.
Weight: 130g.
Closure: Framelock
Clip: Removable, titanium
Notes: knife withdrawn from private collectionJB-RF-CP -
Mikkel Willumsen - Custom Titanium Frame Lock - PRIVATE COLLECTION - handcrafted knife
Interesting handcrafted lockable "One of a Kind" made in 2008 by established Danish knife maker Mikkel Willumsen
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Overall in very good condition
* Commercially available Unique specimen made in 2008.
* Sharpening: Original, with a few small marks from use.
* Marks on blade: A couple of small marks.
* Marks on handle: A couple of small abrasions on titanium folder.
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Collection
Production type: custom
Country of production: Denmark
Blade: handcrafted and beveled, stainless steel RWL-34
Blade treatment: dual tone: stone washed and handcrafted satin finish
Handle: micropallinated titanium and carbon fiber
Blade length: 107mm.
Blade thickness: 4mm.
Length closed: 137mm.
Total length: 245mm.
Thickness when closed: 15mm.
Weight: 215g.
Closure: Framelock
Clip: Removable, anodized titanium
Notes: Made entirely by hand by Mikkel Willumsen - Ball bearing openingMW-CP -
Spyderco - Police knife Steel C07P - VG10 steel - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Rare model of the Police 2 - years 2002 - 2006
* Condition: in like new condition
* Commercially available: difficult to find
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original Sog box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Sports / CollectionType of production: Industrial
Production Lama: Japan
Blade: In VG10 stainless steel
Blade treatment: -
Handle: steel
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 135mm.
Total length: 235mm.
Thick when closed: 8mm
Balancing: -
Weight: 158g.
Closure: Back Lock
Clip: in stainless steel
Sheath: -
Packaging: without box
Note:SP-POL-07P -
Sandrin knives - Monza Zirconium knife - Recoil Lock - Tungsten Carbide Blade - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
Intended use: Sports / Collection
Total length: 197mm
Blade length: 78mm
Blade thickness: 1.30 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: -
Handle length: 110 mm
Handle material: Zirconium
Color:
Weight: 138 grams
Pocket clip: removable - reversible
Pocket clip detail: -
Lock Type: Recoil Lock
Country of production: ItalySK-MONZA-Z -
Cold Steel - Espada XL knife - PRIVATE COLLECTION - 62NX - knife
Knife withdrawn from a private collection - In like new condition - Comes with original box - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Sports / Collection
Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: -
Handle: Aluminum 7075 and G-10
Blade length: 195mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: -
Balancing: -
Weight: 425g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -AP-62NX -
Wander Tactical - Scrambler Clip knife - Raw Finish & Brown Micarta - craft knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balancing: backward
Weight: 201g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings or usable as a neck knife
Packaging: -
Notes: unique knife with Clip point tip, handcraftedWT-SCR-CL-B -
Wander Tactical - Godfather Clip knife - Raw Finish & Brown Micarta - custom knife
Production Type: Artisan
Blade Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw Finish
Handle: Micarta
Blade Length: 243mm.
Blade thickness: 6mm.
Total length: 400mm.
Balance: backward
Weight: 662g.
Sheath: made of thermoformed kydex
Packaging: -
Notes: unique and handcrafted knifeWT-GF-RF-BM -
Wander Tactical - Dimorphodon Rambo knife - Black Blood & Black Micarta - Limited Edition
Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Black Blood dual tone
Handle: Micarta
Blade length: 198mm.
Blade thickness: 5mm.
Total length: 345mm.
Balancing: backward
Weight: 436g.
Sheath: in brown leather
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: Dimorphodon with clip point tip and Rambo knife style blade - Limited Edition - Each knife is unique and handcraftedWT-DIM-RA-BB -
Mission - MPK10-A2 Plain Edge - Navy Seal Knife - USED - Knife
Knife withdrawn from private collection - Used, but overall in good condition - An iconic, iconic knife from the first decade of the 2000s, tested and selected by the U.S. Navy Seals - The knife already when new presented itself with an average low level of finish and with a rough micropeened blade already very delicate and marked, this knife, used in the field by an Italian soldier in theaters of war, shows signs of cosmetic wear on both blade and sheath that do not affect its functionality in the slightest - Factory sharpening still in excellent condition - Original amphibious scabbard, in very good condition - No box - Checked and certified by our in-house laboratory.
Intended Use: Tactical / MultiroleType of Manufacture: industrial
Blade: A2 steel hardened to 57/58HRC
Country of Production: USA
Handle: made of Hytrel
Blade length: 140mm.
Blade thickness: 6.3mm.
Total length: 267mm.
Weight: 360g.
Sheath: amphibious, made of Hytrel
Packaging: without original packaging
Notes: used knife, withdrawn from private collection, overall in good conditionMI-MPK10-A2 -
BlackFox - Nu-Bowie by Kean Alfaro - Brown Micarta - BF-758MIB - folding knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: micarta
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Clip: stainless steel, removable and reversible, deep pocket type
Closure: Button Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758MIB -
Carl Schlieper - Vintage Survival Companion Bowie - PRIVATE COLLECTION - knife
Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was involved in the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors, and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated by bankruptcy in 1993. Production of the brand was later acquired by Freidrich Olbertz in Solingen.
Intended use: Collection/Survival
Type of production: industrial
Blade: stainless steel 440A Ice Tempered
Country of manufacture: Germany
Handle: brass, synthetic coated, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 400g.
Sheath: leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in very good conditionCS-SCK-CP