Nextorch

MH25 PRO flashlight + RSW1 PRO remote switch kit

TECHNICAL SPECIFICATIONS:

Led: 1x UHi 40 LED with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 3300 Lumens (30min) -> 1200 Lumens (2.30h) -> 300 Lumens (7.30h) -> 50 Lumens (50h) -> 1 Lumens (650h) -> Strobe -> Beacon -> S.O.S.
Peak power: 124300 candles
Maximum lighting distance: 705m.
Lighting Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: 1x21700 5300 mAh (included): can also use 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (via special adapter not included)
Measurements: 15.3cm (L) - 2.7cm (D shaft) - 4.0cm (D head) - 2.7cm (D tang)
Weight: 130g. without batteries
Accessories: wrist strap, Nylon belt sheath, clip, USB charging cable, 
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height

Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standard

Original Nitecore remote switch to be used by replacing the tail cap of your flashlight; ideal for use with the flashlight mounted under a firearm for hunting, tactical, or airsoft purposes.

Once installed, it allows for temporary activation of the light by pressing the dedicated rubber remote pad; the light will turn off as soon as pressure on the pad is released. Additionally, it also integrates a standard power button on the side for normal flashlight use.

Compatible only with models:

MH12 PRO - MH25 PRO

The Nitecore GM02 Pro is made of aerospace aluminum alloy with HA III military-grade hard-anodized finish for high durability.

A large stainless steel thumb nut allows for adjustment and ensures stable mounting on a Picatinny rail.

It can accommodate flashlights with a body diameter from 25.8mm to 26.5mm and fits models like

Nitecore SRT7 SRT7i, SRT6i, MH12 Pro, and MH25 Pro.

Dimensions L-4.83 cm x W-4.29 cm x H-4.29 cm

Weight 68 grams

FULL TECHNICAL SPECIFICATIONS:

LED: 1x Led white light; 1x Led red light, both with 50,000-hour life cycle
Output 7 digitally adjusted light modes
Powers and durations: White Light - 350 lumens (3h.) -> 100 lumens (12h.) -> 6 lumens (140h.) -> SOS -> Beacon / Red Light - 5 lumens (40h.) -> Slow Flashing
Range: up to 120m.
Peak power: 3500 candles
Batteries that can be used: 3x AAA 1.2/1.5V ministyl type or Nitecore HLB1300 battery pack (optional, sold separately)
Flashlight dimensions: 59x50x36mm. (with stand included)
Weight: 67g (with stand and elastic band included - batteries excluded)
Lens: thermoplastic polymers
Body: thermoplastic polymers
Strap: elastic, adjustable, reflective in the dark
Notes: water resistant as per IP66 standard
Accessories Included: elastic strap - front mount tilts up to 90° - 3x disposable AAA batteries

TECHNICAL SPECIFICATIONS:

Led: 1x UHi 40 LED with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 3300 Lumens (30min) -> 1200 Lumens (2.30h) -> 300 Lumens (7.30h) -> 50 Lumens (50h) -> 1 Lumens (650h) -> Strobe -> Beacon -> S.O.S.
Peak power: 124300 candles
Maximum lighting distance: 705m.
Lighting Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: 1x21700 5300 mAh (included): can also use 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (via special adapter not included)
Measurements: 15.3cm (L) - 2.7cm (D shaft) - 4.0cm (D head) - 2.7cm (D tang)
Weight: 130g. without batteries
Accessories: wrist strap, Nylon belt sheath, clip, USB charging cable, 
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height

Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standard

KEY FEATURES:

* Ultralight AA dual-beam headlamp.
* Maximum power of 240 lumens
* Red light illumination designed to preserve night vision.
* Uses a unibody optical lens system with various facets.
* Compatible with various AA batteries, such as alkaline , Ni-MH and lithium batteries by tolerating different voltages.
* Designed with two different buttons in shape and touch for easy one-handed operation.
* 3 brightness levels, 2 light sources and 3 special modes available.
* Made of special plastic resistant to impact and low temperatures.
* Compact and lightweight
* Shock and drop resistant up to 1 meter high.
* Waterproof and dustproof grade according to IP66 standard





FULL TECHNICAL SPECIFICATIONS:

LED: 1x White light LED; 1x Red light LED, both with 50,000-hour life cycle
Output 7 digitally adjusted light modes
Powers and durations: White Light - 240 lumens (4h.) -> 60 lumens (10h.) -> 6 lumens (400h.) -> SOS -> Beacon / Red Light - 5 lumens (10h.) -> Slow Flashing
Range: up to 90m.
Peak power: 1600 candelas
Batteries that can be used: 1x AA type 1.2/1.5V stylus
Flashlight dimensions: 61.5x36.2x28.9mm. (with stand included)
Weight: 36g (with stand and elastic band included - batteries excluded)
Lens: thermoplastic polymers
Body: thermoplastic polymers
Strap: elastic, adjustable, lights up in the dark
Notes: water resistant as per IP66 standard
Accessories: elastic strap - front mount tiltable up to 90° - 360° rotatable multipurpose clip for attachment to various mounts

KEY FEATURES:
* Ultra lightweight IR (infrared) mini signal light.
* Uses 4 x high performance LEDs.
* Produces IR light (940nm wavelength), red, green and blue light for a total of 9 modes.
* Switch design allows one-handed operation of the flashlight
* Powered by a built-in 250mAh Li-ion battery for up to 75 hours of battery life
* Built-in Li-ion battery charging circuit with USB-C charging port.
* ARC rail adapter on the body and 3 lightweight brackets included to enable multiple mounting and transportation options
* Made of durable PC materials
* Impact resistant up to 1 meter in height





FULL TECHNICAL SPECIFICATIONS:

LEDs: 4x high-power LEDs: infrared, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light for each LED + 1 special mode (blue/red light police warning)
Powers and Durations Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - Infrared ( 4h.)
Powers and Durations Flashing Light : Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - Infrared ( 50h.) - Police Warning ( 56h.)
Method of power on and selection : Central button for power on, power off and light selection
Body: thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Measurements of flashlight with bracket: 2.95cm (Length) - 2.95cm (Width,) - 2.54cm (Thickness)
Flashlight weight: 16.7g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Waterproofness: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: actual powers and durations, lab-certified

High-performance 18650 battery (8A discharge) specially designed to withstand cold and harsh climates and temperatures as low as -40° C

BATTERY FEATURES
* Rechargeable Li-Ion 18650 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 3500mAh
* Positive Pole: protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 8A

DIMENSIONS
* Length: 69.3±0.3mm / 2.73"±0.01"
* Diameter: ≤18.7mm / 0.74"

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

Innovative and practical 18650 battery that can be recharged either traditionally or via built-in USB-C port and can also be used as a pocket power bank

BATTERY FEATURES
* Rechargeable Li-Ion 18650 cylindrical battery and pocket power bank.
* Rated voltage: 3.6V / 9.36Wh
* Capacity: 2600mAh
* Positive Pole: protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* USB-C Input and Output: 5V/1A

DIMENSIONS
* Length: 71±0.3mm
* Diameter: 18.6mm±0.2mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

Designed exclusively for Nitecore i-Series and i-Generation flashlights, not compatible in other flashlights or other devices

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4200mAh
* Positive Pole: Flat, simultaneously present at both the bottom and top of the flashlight.
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 15A

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of the batteries

DIMENSIONS
* Length: 76.8 +/- 0.3mm
* Diameter: <22.3mm

FLASHLIGHT COMPATIBILITY
works only with NITECORE i4000R, P10i, P10iX, P20i, P20i UV, P20iX, P23i, P30i, P35i, SRT6i flashlights and NITECORE i-Series and i-Generation lighting systems - NOT COMPATIBLE WITH OTHER PRODUCTS

High discharge power (15A) 21700 battery specially designed to withstand cold and harsh climates and temperatures as low as -40° C, rechargeable directly via built-in USB-C port or via conventional charger

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4200mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 15A

DIMENSIONS
* Length: 76.8 +/- 0.3mm
* Diameter: <22.3mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

21700 battery specially designed to withstand cold and harsh climates and temperatures as low as -40° C

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4200mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 8A

DIMENSIONS
* Length: 74.6 +/- 0.3mm
* Diameter: <22.3mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

FEATURES
* Ultra-light dual-beam USB-C rechargeable headlamp weighs only 45g.
* Specially designed for outdoor activities.
* Equipped with spotlight + floodlight (color temperature: 5500K) and red light illumination
* With a maximum output of 400 lumens
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Maximum beam intensity of 1,029cd and maximum range of 64m
* Built-in 650mAh Li-ion battery.
* Constant current circuit ensuring stable light output with a maximum range of 90h
* Designed with two different buttons in shape and tactile feel for easy one-handed operation
* 4 brightness levels, 3 light sources and 3 special modes available
* Integrated intelligent Li-ion battery charging circuit with USB-C charging port.
* Designed with 4 charge indicators to indicate the remaining battery charge
* Made of durable polymer material
* Waterproof and dustproof as per IP66 standard
* Shock-resistant up to 1 meter

WEIGHTS AND DIMENSIONS
Dimensions: 60.1mm x 36.8mm x 25mm (Stand Included)
Weight: 45g (Stand and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C Charging Cable, Elastic Headband

TECHNICAL SPECIFICATIONS.
Led: 1x white spot light, 1x white flood light, 1x red auxiliary all with a life cycle of 50,000 hours
Operating Modes: 10 light powers (Mix, Spot, Flood, Red) + 2 special modes (SOS and Beacon)
Powers and Durations with MIX light : 400 Lumens (2.40h. ) -> 200 Lumens (4.40h.) -> 60 Lumens (10.25h.)
Peak power : 1029 candelas
Maximum lighting distance: 64m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: polymer
Battery: built-in, non-removable, 3.7V, 650mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

Key Features.
* Quad-slot USB-C smart charger.
* QC (Quick Charge) and PD (Power Delivery) inputs available.
* Able to charge 2 batteries at the same time and control each slot independently.
* Charging speed of up to 3,000mA in a single slot.
* Compatible with Li-ion and Ni-MH/Ni-Cd batteries, with automatic detection
* Automatic detection of battery charge level and automatic selection of appropriate voltage and charging mode
* Automatic selection among 3 charging modes (DC, CV and -dV/dt).
* Automatic detection of large/small capacity batteries and automatic selection of appropriate charging current
* Automatic suspension upon completion of charging
* Reverse polarity and short circuit protection.
* Activation of overcharged batteries
* Protection against excessive charging time (overtime).
* Made of durable and fireproof PC materials.
* Optimal design for heat dissipation
* Certified by RoHS, CE, FCC and CEC

ACCESSORIES INCLUDED
USB-C Charging Cable

TECHNICAL SPECIFICATIONS
Input: 5V⎓2A / 9V⎓2A / 12V⎓1.5A - 18W (MAX)
Output: 4.2V±1% / 1.48V±1%
Rapid Recharge: 3,000mA*1 MAX / 1,500mA*2 MAX / 1,000mA*3 MAX / 750mA*4 MAX
Standard Recharge: 2,000mA*1 MAX / 1,000mA*2 MAX / 700mA*3 MAX / 500mA*4 MAX

BATTERY COMPATIBILITY
IMR/Li-ion: 10440, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 21700, 22500, 22650, 25500, 26500, 26650, 26700
Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D

Dimensions: 148mm x 105mm x 37mm (5.83" x 4.13" x 1.46")
Weight: 191.4g (6.75 oz) (Charging cable not included)

FEATURES
* USB-C rechargeable dual-beam headlamp.
* Specially designed for outdoor activities.
* Equipped with spotlight + floodlight (color temperature: 5500K) and red light illumination
* With a maximum output of 400 lumens
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Maximum beam intensity of 1,029cd and maximum range of 64m
* Built-in 650mAh Li-ion battery.
* Constant current circuit ensuring stable light output with a maximum range of 90h
* Designed with two different buttons in shape and tactile feel for easy one-handed operation
* 4 brightness levels, 3 light sources and 3 special modes available
* Integrated intelligent Li-ion battery charging circuit with USB-C charging port.
* Designed with 4 charge indicators to indicate the remaining battery charge
* Made of durable polymer material
* Waterproof and dustproof as per IP66 standard
* Shock resistant up to 1 meter

WEIGHTS AND DIMENSIONS
Dimensions: 60.1mm x 36.8mm x 25mm (Stand Included)
Weight: 56g (Stand and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C Charging Cable, Elastic Headband

TECHNICAL SPECIFICATIONS.
Led: 1x white spot light, 1x white flood light, 1x red auxiliary all with a life cycle of 50,000 hours
Operating Modes: 10 light powers (Mix, Spot, Flood, Red) + 2 special modes (SOS and Beacon)
Powers and Durations with MIX light : 400 Lumens (2.40h. ) -> 200 Lumens (4.40h.) -> 60 Lumens (10.25h.)
Peak power : 1029 candelas
Maximum lighting distance: 64m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: polymer
Battery: built-in, non-removable, 3.7V, 650mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

Key Features:
* Powerbank equipped with LED lights with a capacity of 10000 mAh.
* Designed to be used at high altitudes and low temperatures.
* USB-C input/output channel.
* Output of 20W
* Compatibility with PD charging and QC 3.0.
* LED residual power level indicator.
* IPX5 waterproofing.
* Equipped with dual LED emergency flashlight that produces 50 Lumens for up to 30h. continuously


Technical Specifications:
* Capacity: 10000mAh / 3.6V / 36Wh
* Length: 8.9cm
* Width: 4.52cm
* Thickness: 2.26cm
* Weight: 168.5g
* USB-C input:5V⎓2.4A / 9V⎓2A
* USB-C Output:5V⎓3A / 9V⎓2.22A / 12V⎓1.68A

Key Features:

* Revolutionary and extremely advanced keychain flashlight.
* Utilizes two LEDs capable of producing a maximum light output of 500 lumens
* Maximum peak intensity of 2,000cd and maximum illumination distance of 89 meters
* Utilizes a totally transparent optical lens to ensure even and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charging time etc.
* Built-in 280mAh Li-ion battery
* APC technology (Advanced Power Cut-Off) to minimize the power consumption when not in use.
* Integrated Li-ion battery charging system via USB-C plug.
* High-efficiency circuitry to ensure continuous illumination for up to 60 hours.
* 5 selectable brightness levels with direct access to the TURBO mode
* 2 selectable lockout levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and strains up to 30kg.

TECHNICAL DATA:

Led: 2x Osram P8 with a life cycle of 50,000 hours
Brightness levels: 5 brightness levels, selectable with the dedicated button
Powers and duration: 500 Lumens (0.15h.) -> 200 Lumens (0.45h.) -> 65 Lumens (2.30h.) -> 15 Lumens (8h.) -> 1 Lumen (60h.)
Peak power: 2000 candles
Maximum lighting distance: 89m
Lighting method: On/Off button
Light selection method: Light selection button
Body: Titanium alloy
Battery: Built-in 280mAh Li-Ion type, with built-in USB-C charging system
Measurements: 4.6cm (Length) - 2.5cm (Width) - 1.25cm (Thickness)
Weight: 21.5g. battery included
Accessories: steel ring for keychain attachment
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: it resists falls from 1m height
Notes: Equipped with integrated charging system via USB-C port (cable and power supply not included in the package; compatible with power supplies and cables for smartphones and tablets commonly available); during charging, the integrated display will show the status. The charging system automatically prevents undervoltage, overvoltage and has built-in protection against short circuits. - The rear hook of the flashlight, designed to anchor it to a keychain or other equipment, resists a traction of up to 30kg.

Power and duration certified in laboratory by ANSI/PLATO FL 1-2019 standard

KEY FEATURES
* Wide light, depth light and auxiliary red light with a maximum output of 2,000 lumens
* Uses 2x Luminus SST-40-W LEDs for both primary white lights
* The reflector uses a specially designed TIR optical lens for long-range illumination to provide a maximum range of 202 meters and a maximum beam intensity of 10,300cd
* The projector uses TrueVision technology for an ultra uniform beam pattern.
* Continuous light variation for both spotlight and projector (Patent No.: ZL201820778007.X)
* Highly efficient constant current circuit provides light output for up to 800 continuous hours.
* Intelligent lithium-ion battery charging circuit equipped with a USB-C charging port
* 180° tilt angle for different lighting needs
* A charge indicator under the "+" and "-" buttons indicates the remaining battery charge.
* Charge indicator can display battery voltage (±0.1V)
* Built-in ATR (Advanced Temperature Regulation) module (Patent No. ZL201510534543.6)
* Constructed of aircraft grade aluminum alloy
* Military grade HA III ultra durable anodized finish
* Waterproof as per IP68 standard (submersible up to 2 meters)
* Shock resistant up to 2 meters high

TECHNICAL FEATURES
LED: 2x Luminus SST-40-W with 50,000 hour life cycle
Output: 13x digitally controlled light output and 3 signaling modes
Powers and duration spot light: 1 lumen (800h.) -> 50 lumens (28h.) -> 250 lumens (6h.) -> 950 lumens (2.30h.) -> 1800 lumens (30*min. - without taking into account automatic temperature control) -> 2000 lumens (Turbo)
Flood light powers and duration: 1 lumen (800h.) -> 45 lumens (28h.) -> 220 lumens (6h.) -> 850 lumens (2.30h.) -> 1400 lumens (30*min. - without taking into account automatic temperature control) -> Beacon -> S.O.S.
Powers and durations auxiliary red light: 3 lumens (110h.) -> 11 lumens (30h.) -> flashing at 11 lumens (160h.)
Range: up to 202mt.
Peak power: 10300 candles
Usable batteries: 1x 18650HP 3.6V (included in the package) or 2x CR123A 3.0/3.7V disposable or rechargeable
Flashlight dimensions: 91.5x34.75x26.5 mm. 
Weight: 70g (without battery)
Lens: TIR type, in shockproof plastic material
Body: aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Included Accessories: 1x Battery 18650 NL1835HP 3.6V and 3500mAh - USB charging cable - elastic front strap - front bracket
Integrated Charging System: through the integrated USB-C port - protected by an insulated cover - and using the USB cable provided as standard you can provide for charging the battery supplied, the operation is monitored by a special LED light located next to the buttons of selection light. The charging cable can be attached to any PC equipped with USB port or to any wall or cigarette lighter power supply equipped with USB port.
Notes: waterproof and submersible as per IP68 standard - 1750 lumens of power are achievable only by using a battery with a discharge power equal to or greater than 8A (insluded); using different batteries, the maximum power will be limited to 900 lumens.

ANSI/PLATO FL1-2019 standard certified power and duration tested with 1x 18650 HP 3500mAh

Mini organizer made of water-repellent 500D Polyester consisting of a single zippered main compartment (for storing power bank, credit cards, headphones and cables). On the front side it offers 6 M.O.L.L.E. compatible modular webbing/attachments and on the back side it has an aluminum carabiner and a quick release webbing that allows to wear it on the belt or to tie it to other M.O.L.L.E. type webbing.

Material: 500D Water-repellent Polyester
Dimensions: 12.5cm x 7.5cm x 3cm
Carabiner: rear, aluminium
Loop: rear, belt loop, quick release, M.O.L.L.E. compatible

Mini organizer made of 500D water-repellent Polyester consisting of a zippered main compartment (to store cell phones, power bank, headphones, keys and any other bulky gadget) with a small internal net to hold small products; two external side mesh compartments for quick access (for flashlights, cutters, folding knives, multipurpose tools).

Material: 500D water repellent polyester
Dimensions: 16cm x 9.5cm x 8cm
Carabiner: rear, aluminum

KEY FEATURES:
* Uses 4 x high performance LEDs.
* Offers 9 lighting modes including 4 constant colors + flashing and red/blue flashing
* Powered by a built-in 250mAh Li* ion battery that allows constant light up to 75 hours.
* Built-in Li-ion battery charging circuit via USB-C port
* One-switch design, one-handed operation.
* Built-in power indicator to inform about remaining battery power
* ARC rail adapter on the body and 3 lightweight brackets included to allow multiple mounting and carrying options
* Made of durable plastic materials
* Ultralight and compact design
* Shock resistant up to 1 meter high

FULL TECHNICAL SPECIFICATIONS:
LEDs: 4x high power LEDs, white, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light in 4 colors + 1 special mode (blue/red light police warning)
Powers and Times Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - White (15 Lumens / 5.45h.)
Powers and Times of Flashing Light: Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - White (15 Lumens / 54h.) - Police Warning (56h.)
Power and selection method : Central button for power on, power off and light selection
Body: Thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Flashlight size with bracket: 2.95cm (Length) - 2.95cm (Width) - 2.54cm (Thickness)
Flashlight weight: 15.8g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height

Equipped with 4 CREE XP-G3 LEDs with a lifespan of 50,000 hours, the NPL30 has an output of 1200 lumens, a peak intensity of 3,300 cd and a shooting depth of 113 meters. It is powered by 2 CR123A batteries (included) with a maximum autonomy of 1 hour and 45 minutes. Both switches can perform the same functions to provide ambidextrous light activation. Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and triple press one of the power buttons for STROBE mode, which uses randomly changing frequencies for stronger dizzying effects.

There is the standard Picatinny rail mount for quick mounting and compatible with firearms with universal Picatinny rails. Electronic reverse polarity protection ensures safe and stable use. Built-in ATR technology adjusts the NPL30's output based on working conditions and environment to maintain optimum performance. It has an ultralight weight of 130g (4.59oz) (including battery), IP66 waterproof and 1m impact resistant.

Led: 4x Cree XP-G3 - with a life cycle of 50,000 hours
Operating Modes: Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and press one of the power buttons three times for the STROBE mode, which uses frequencies that change randomly for stronger dizzying effects.
Powers and Durations: 1200 lumens (1.45h) Strobo 1200 lumes
Power peak: 3300 cd
Maximum illumination distance: 113m.
Ignition method: double switch, ambidextrous, placed on the sides of the flashlight
Light variation method: double switch, ambidextrous, placed on the sides of the flashlight
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: works with two CR123A batteries (included in the package)
Measurements: 8.1cm (Length) - 3.8cm (Width) - 3.5cm (thickness, sled included)
Weight: 130g. with battery inserted
Accessories: o-rings
Water resistance: as per IP66 standard
Impact resistance: withstands drops from 1m. in height
Notes: Universal quick coupling slide, compatible with Picatinny and Weaver systems

Green filter made of ultra-transparent hardened glass with rubber body, so you can adapt it to different types of flashlights with 65mm diameter heads.

This filter transforms the beam of your flashlight in a green light excellent to be used in conjunction with night vision and suitable not to scare animals. Also suitable for tactical readings of maps and various documentation.

Compatibility:

NITECORE: P30i

Red filter made of ultra-transparent hardened glass with rubber body, so you can adapt it to different types of flashlights with 65mm diameter heads.

This filter transforms the beam of your flashlight in a red light excellent to be used in conjunction with night vision and suitable not to scare animals. Also suitable for tactical readings of maps and various documentation.

Compatibility:

NITECORE: P30i

The Nitecore BP18 is a computer backpack with a robust and practical design perfect for travel or for those who travel frequently. Made from 500D nylon fabric, this backpack is dirt and water resistant, making it perfect for city or rural travel.

The main compartment of the package has a volume of 18 liters and can hold laptops up to 13 inches in length. The BP18 obviously has many other compartments including one for hydration backpacks and a series of internal compartments on the sides for tools or valuables.

This pack also features a tactical-style MOLLE texture that allows users to customize their carrying experience with compatible gear and backpacks.

Notable features
»500D nylon fabric resistant to wear with dirt and water resistant
"18 liter large capacity main compartment
»Can hold laptops up to 13" in length
»Molle belt system for modular extensions

Dimensions
16cm (L) x 24cm (W) x 47cm (H)

Weight
Approx. 710g / 1.6lbs

NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

Key Features

Triple output USB-C rechargeable headlamp, made of solid metal
It uses a Luminus SST-40-W primary LED with a maximum output of 1,750 lumens
Equipped with two auxiliary lights: one white with high CRI (CRI≥90, Color temperature: 4500K) and one red
Unibody lens of TIR type to emit a uniform and soft light
Maximum light intensity of 7,000cd and maximum range of 165 meters
The highly efficient constant current circuit provides stable light output for up to 800 hours
Built-in Li-ion battery charging circuit, via USB-C port
180 ° adjustable tilt angle for various lighting needs
The indicator under the switch indicates the remaining battery charge (Patent ZL201220057767.4)
The indicator also indicates the battery voltage (± 0.1V)
Built-in advanced temperature regulation module (ATR) (Patent ZL201510534543.6)
Constructed from aircraft grade aluminum alloy
Tough anodized finish, military grade HA III
Classified as waterproof and dustproof as per IP68 standard (submersible up to 2m)
Shock resistant up to 2 meters high

LED: 1x Luminus SST-40-W with a lifespan of 50,000 hours
Output: 8x constant light output, digitally regulated and 3 signaling modes
Power and duration of main white light: 1 lumen (800h.) -> 50 lumens (28h.) -> 250 lumens (6h.) -> 900 lumens (2.15h.) -> 1750 lumens (30 * min. - without holding account of automatic temperature adjustment) -> Beacon -> SOS
Powers and durations of the auxiliary red light: 3 lumens (110h.) -> 11 lumens (30h.) -> flashing at 11 lumens (57h.)
Powers and duration of auxiliary white light: 24 lumens (42h.)
Range: up to 165mt.
Peak of power: 7000 candles
Usable batteries: 1x 3.6V 18650HP (included in the package) or 2x 3.0 / 3.7V disposable or rechargeable CR123A
Torch dimensions: 90.8x34.7x26.9 mm.
Weight: 65.5g (without battery)
Lens: in hardened glass with anti-reflection treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Accessories included: 1x 3.6V and 3500mAh 18650 NL1835HP battery - USB charging cable - front elastic strap - front bracket - spare rubber button - spare o-ring
Integrated Charging System: through the integrated USB-C port - protected by an insulated cover - and using the USB cable supplied as standard, it is possible to recharge the supplied battery, the operation can be monitored thanks to a special LED light placed next to it. below the light selection buttons. The charging cable can be attached to any PC with a USB port or to any wall or cigarette lighter power supply with a USB port.
Notes: waterproof and submersible as per IP68 standard - the 1750 lumens of power can only be obtained using a battery with discharge power equal to or greater than 8A (included); using different batteries, the maximum output will be limited to 900 lumens.

Powers and durations certified by ANSI / PLATO FL1-2019 standards tested with 1x 18650 HP 3500mAh

KEY FEATURES

* It uses two main LEDs 1XCREE XP-G3 S3 (3000K) Spotlight (from depth) and 1xCREE XP-G3 S3 (5700K) Floodlight (ambient), usable individually or combined and two small central auxiliary red light LEDs.

Maximum output power 520 lumens with depth about 103 meters
* Polymer torch body
* The torch consists of a double parabola (front) which guarantees a double possibility of illumination;

Parabola CREE XP-G3 S3 (3000K) Spotlight with 3 levels: 520 lumnes - 400 lumens (6 hours) - 100 lumens (10 hours)
CREE XP-G3 S3 dish (5700K) Floodlight with 2 levels: 200 lumens (8 hours) - 55 lumens (13 hours)

Central red LEDs: 16 lumens (6 hours)

* Maximum light intensity of 4120 cd and maximum range of 128 meters
* Powered by both USB-C Nitecore HLB1300 Rechargeable Li-ion Battery (included), and 3 AAA batteries
* Double button on, off and adjustment
* Wide 90 ° lighting angle, specially designed for hiking and sporting activities
* Elastic front band included, light and breathable
* Electronic protection against battery polarity inversion
* Made of ABS
* Submersible as per IP66 specifications
* Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL DATA:

Battery (included): Nitecore HLB1300 Rechargeable Li-ion Battery USB-C rechargeable battery
Torch dimensions: 54.9x398.6x28.3mm.
Weight: 82.5g (flashlight only, without batteries, headband and holder for front use)
Lens: micro-blasted hardened glass
Body: ABS
Notes: water resistant as per IP66 standard.
NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

Portable, foldable and waterproof 100W solar panel, compatible with Nitecore NPS series Power Station.

Monocrystalline silicon panels, with cell efficiency of 23%: over 60% more efficient than conventional solar panels. Can convert energy steadily even on extremely cloudy days.

With a constant solar source, the FSP100W offers unlimited power in outdoor environments, especially when compared to Nitecore's NPS series of portable generators that can be recharged in 2 to 6 hours.

Lightweight (2.6kg) and compact (38.5x30x4.5cm when closed), it is very convenient to store and transport thanks to the integrated handle.

It withstands the harsh environment thanks to its laminated ETFE unibody structure that offers easy maintenance and IPX5 waterproof certification. The high-density outer fabric is also designed to provide excellent waterproof qualities.

TECHNICAL SPECIFICATIONS:

Model: SPF100W
Dimensions: Open: 60.6cm x 129.4cm x 0.5cm
Folded: 38.5cm x 30cm x 4.5cm
Weight: 2.6kg
Number of Panels: 8
Cell Efficiency: 23% (lab tested)
Operating Current: DC Output 5.6A
Operating Voltage: DC Output 18V (MAX)
Total Output Power: 100W (MAX)
Output port: 7.9 x 5.5mm customized DC output port

WHY CHOOSE:
Tactical/military use - High light output - Very compact size - Convenience of integrated charging system - Light with strong spot - Integrated UV light - Convenience and immediacy of light selection controls. With Strobe Ready technology, simply press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:
- Uses a Luminus SST-40-W LED with a maximum output power of 1,800 lumens
- UV light uses 4 x UV LEDs (320mW, 365nm wavelength)
- Glass and dishes with anti-reflective, crystal coating and PDOT treatments
- High-efficiency circuits to allow constant light for up to 50 hours continuously
- Dual rear power and selection buttons, quick and intuitive, designed for tactical applications
- STROBE READY technology that enables instant access to STROBO light
- STROBE light continuously varies randomly in frequency to increase disorientation effect
- Possibility to change the mode of use between Tactical Mode and Daily Mode
- Integrated charging system for Li-ion batteries via USB-C port
- NITECORE 21700 Li-ion battery included
- Impact-resistant silicon nitride front crown for excellent emergency glass-breaking capabilities
- Integrated ATR temperature control system
- Optical type lenses with anti-scratch coverage on both sides
- Made of anodized aircraft aluminum alloy with military grade HA III finish
- Waterproof as per IP68 standard (Submersible to 2 meters depth)
- Withstands impacts up to 2 meters high

Laboratory certified power and lifetime as per ANSI/NEMA FL1 standard using 1x 21700i 3.7V 4000mAh - under different usage conditions or using different batteries, data may vary

LED: 1x Luminus SST-40-W with a life cycle of 50,000 hours
Operating Modes: 3, electronically controlled + Strobe
Powers and Times: 1800 lumens (1h 45min.) -> 250 Lumens (8h 30min) -> 35 Lumens (38h) -> UV 320mW (30h) -> Strobe 1800 lumens
Peak power: 28500 candles
Maximum Lighting Distance: 337m
Ignition Method: Rear Button with "Momentary On" system for light signals and Rear Button "Mode" for immediate access to strobe function, which remains active as long as the button is held down
Light selection method: With the flashlight on, by pressing the rear "Mode" button
Head: Aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Batteries: works only with a rechargeable battery 21700 Nitecore "i series" (NL2140i, 4,000mAh - included in the package). If necessary, it can also work with 2x CR123 3.0V without being able to reach 1800 lumens of power.
Measurements: 15.0cm (L) - 2.54cm (D shaft) - 3.18cm (D head)
Weight: 124g. excluding batteries
Accessories: wrist strap, NTH20 tactical polymer sheath, spare o-ring, clip, spare rubber back button
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: thermoplastic, rigid, for quick deployment of the flashlight
Impact resistance: it resists falls from 1.5m height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Led: 1x Osram P8 with a life cycle of 50,000 hours
Operating Modes: 4 light powers, selectable with the dedicated button + Warm white light + Warm white light flashing + Ultraviolet
Powers and Durations: 300 Lumens (0.30h.) -> 60 Lumens (1h.) -> 15 Lumens (4h.) -> 1 Lumen (40h.) -> UV -> CRI light -> CRI flashing
Power peak: 1260 candles
Maximum illumination distance: 71m.
Lighting method and light selection: Front button
Materials: aviation aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, equipped with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diam.)
Weight: 12g. - battery included
Accessories: steel ring for hooking to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light immersions
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via MicroUSB port (cable not included in the package)

The Tiki GITD will glow green in the dark after it has been illuminated by UV light.

Original Nitecore remote control to be used by replacing the rear cap of your flashlight; ideal to be used with the flashlight mounted under a firearm for hunting, tactical or soft-air use.

The remote consists of two parts: an aluminum back cap that is mounted in place of the original cap of the flashlight and a removable remote cable that attaches via USB-C plug. Once plugged in, it allows both the temporary switching on of the light (the light is emitted by pressing and holding the pad, it turns off by releasing it) and the strobe function through a dedicated button; it also allows the fixed switching on of the light with the subsequent possibility to vary its light power.

On the back, the aluminum cap has also a standard integrated power button that allows to use the flashlight normally (on and off), but that does not allow to select the light power or the STROBO light.

Diameter cap: 28.6mm
Total cable length: 307mm

Compatible only with models

P10i, P20i and P30i

Key Features:
* Ultralight powerbank with 10000 mAh capacity.
* IP68 waterproof, submersible to a depth of 2m and resistant to shocks and drops up to 1m in height.
* USB output channel with additional security mechanism for Nitecre headlamps
* LED residual power level indicator
* Operates in temperatures below -10°C / 14°F
* Weighs only 215 grams and is super compact, so you can take it anywhere.

Technical Specifications:
* Capacity: 1000mAh / 3.64V / 36.4Wh
* Length: 10.54cm
* Width and Thickness: 5x2.8cm
* Weight: 215g
* Micro USB Input: 5V-2A
* USB-A Output: (Single Port) 5V-2.4A / 9V-2A / 12V-1.5A - (Dual Port) 5V-2.4A (18W Max)

Supported Protocols:
* QC2.0/QC3.0 Output
* FCP/AFC/SFCP Input & Output
* MTK PE+1.1&2.0 Output
* BC1.2, Apple, Samsung Fast Charging

Perfect companion for extreme adventures!
Small, compact, lightweight and rugged, it's designed to follow you on every adventure. Thanks to the IP68 certification, it can withstand any environment, from the dustiest to the most humid, even going underwater up to 2 meters deep! Take it with you on your high altitude adventures, it can withstand extreme temperatures down to -10°C!

Designed for Nitecore headlamps!
Thanks to the integrated metal hook fully compatible with the new Nitecore headlamps - such as the HU60 - it allows a quick, safe and constant coupling between the headlamp and the battery pack so you'll never run out of light when you need it, even the most frantic!

*** WARNING: NOT COMPATIBLE WITH APPLE iPHONE ***

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port
* NITECORE 21700 rechargeable 5,000mAh battery included in the package.
* Uses a CREE XHP35 HI LED with a maximum power of 2,000 lumens
* Maximum luminous intensity in the central point of 250,000cd. and maximum range of 1,000 meters.
* Glass and dishes with anti-reflection, crystal coating and PDOT (Precision Digital Optics Technology) treatments.
* USB-C remote control included in the package easily applicable that allows fixed light, temporary, strobe and change of powers.
* Built-in potentiometer with indicator light showing the remaining battery charge and voltage.
* Constructed of solid aircraft-grade aluminum alloy with military-specification anodization
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LED: 1x CREE XHP35 HI with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Beacon, Turbo and Strobe (the latter only using the remote control)
Powers and Duration: 2000 lumens (30min.) -> 1000 Lumens (1h 30min) -> 385 Lumens (4h) -> 85 Lumens (18h) -> 6 Lumens (100h) -> Beacon -> SOS
Peak power: 250000 candles
Maximum Lighting Distance: 1000m
Lighting Method: Rear Button with "Momentary On" system for light signal or by remote control
Light selection method: With the flashlight on, by pressing the front button "Mode" or by remote control
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-reflective treatment
Batteries: works with a rechargeable 21700 rechargeable battery "i-generation" (NL2150HPi, 5,000mAh) included in the package. If necessary it can also work with 2x CR123 3.0V but without being able to reach 2000 lumens of power
Measurements: 17.7cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 255.5g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, clip, RSW2i remote control, USB charging cable
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: cordura, belt, with velcro closure
Impact resistance: it resists falls from 1m height

Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months

Very light and capacious waist bag designed mainly for runners and for those who practice outdoor sports; it can hold soft water bottles, powerbanks, cell phones, wallets and small items such as house keys and flashlights.

Breathable, soft, non-slip, universally adjustable through Velcro, it has compartments fixed both by zipper and elastic cords. Fits diameters from 85cm to 120cm.

Features and Materials:

- Made of lightweight and breathable 70 denier Cordura Nylon.
- Non-elastic, to prevent belt slippage
- Designed for everyday use or hiking
- Quick-access main pocket secured by elastic cord
- Inside pocket closed by a high quality YKK zipper
- External reflective parts for increased safety and visibility
- Ability to attach textiles, t-shirts or towels to elastic cords
- Highly adjustable Velcro waistband
- Fits from 85cm to 120cm in diameter
- Weighs only 80g
- Dimensions of 40x11,5cm.

WHAT IS IT FOR?
The TSL10i is a rear cap equipped with a signal light expressly designed and only compatible with the Nitecore torches of the "i-Generation" series (such as the i4000R, P10i, P20i and others).

Offers multiple options for police-style blue, red, green, white and red / blue flashing signaling. During special operations or rapid deployments, the flashing colors are able to represent and indicate different groups to allow quick identification of the members of the various teams in specific positions.

HOW DOES IT WORK?
The TSL10i replaces the original rear cap of the torch, therefore it must be screwed in its place. It allows the torch to be controlled normally with the main power button and the secondary light selection button which also acts as "Strobe Ready".

The TSL10i also has a small additional button placed on the side that allows you to turn on, turn off and select the various flashing functions emitted by the cap itself. The cap is powered directly from the Nitecore "i-Generation" battery already present in the flashlight barrel.

FUNCTIONS AND DURATION:
Blue flashing for a continuous duration of 330h
Red flashing for a continuous duration of 360h
Green flashing for a continuous duration of 300h
White flashing for a continuous duration of 300h
Alternating Red / Blue Police Warning flashing for a continuous duration of 72h

Laboratory tested durations using a 5000mAh Nitecore 21700 "i-Generation" battery

COMPATIBILITY:
It only works with Nitecore flashlights equipped with an "i-Generation" battery (eg P10i, P20i, i4000 etc); it cannot be used with any other type of flashlight or battery.

KEY FEATURES:
* Revolutionary and extremely advanced keychain flashlight
* Uses 4 CREE XP-L2 V6 LEDs capable of producing a maximum light of 4,000 lumens
* Maximum peak intensity of 10.900cd and maximum illumination distance of 209m
* Uses a totally transparent optical lens to ensure uniform and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charge time etc.
* Built-in 1,000mAh Li-ion battery
* APC (Advanced Power Cut-Off) technology to minimize consumption when not in use
* Integrated Li-ion battery charging system via USB-C plug
* High efficiency circuits to ensure continuous lighting up to 67 hours
* 5 selectable brightness levels with direct access to TURBO mode
* Stores the last light mode selected by the user
* 2 adjustable lock levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and tears up to 30kg

TECHNICAL DATA:
Led: 4x Cree XP-L2 V6 with a life cycle of 50,000 hours
Brightness levels: 5 light powers, selectable with the appropriate dedicated button
Powers and Durations: 4000 Lumens (N.D.) -> 200 Lumens (2.45h.) -> 65 Lumens (7h.) -> 15 Lumens (21h.) -> 1 Lumen (67h.)
Peak of power: 10,900 candles
Maximum illumination distance: 209m.
Power on method: Power on and off button
Light selection method: Light selection button
Body: Aviation aluminum with HA III anodization degree
Battery: Integrated 1,000mAh Li-Ion type, equipped with integrated USB-C type charging system - The flashlight can stay on while it is charging
Measurements: 8.2cm (Length) - 2.92cm (Width) - 2.92cm (Thickness)
Weight: 77g. - clip and battery included
Accessories: steel ring for hooking to the key ring
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via USB-C port (cable included, power supply not included) - The flashlight can stay on while it is charging - In the charging phase, the LEDs under the buttons will show the status and will automatically turn off when recharging completed - The charging system automatically prevents undervoltage, overvoltage and has built-in short circuit protection. - The rear hook of the flashlight, with quick release and designed to anchor it to a key ring or other equipment, resists traction up to 30kg.

WHY CHOOSE IT:

Tactical / military use - High luminous power - Very compact dimensions - Convenient integrated charging system - Light with strong spot - Practicality and immediacy of light selection commands. Thanks to Strobe Ready technology, just press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:

* Italian warranty Nitecore Italia: 5 year guaranteed torch - 12 month guaranteed battery
* Integrated charging system for Li-ion batteries via Micro-USB-C port on the head
* NITECORE 21700 rechargeable battery (NL2140i, 4,000mAh) included in the package
* Uses a Luminus SST-40-W LED for a maximum output power of 1800 lumens
* Maximum light intensity in the center point of 21100cd. and maximum range of 290 meters
* Glasses and parables with anti-reflective treatments, crystal coating and with PDOT (Precision Digital Optics Technology)
* Integrated potentiometer with indicator that indicates the residual charge and residual voltage of the battery
* Constructed from solid aircraft grade aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 18650 3.7V 3500mAh - in different conditions of use or using different batteries, the data may vary

Led: 1x Luminus SST-40-W with a life cycle of 50,000 hours
Operating Modes: 4, electronically regulated
Powers and Durations: 1800 lumens (1h 30min.) -> 280 Lumens (7h 15min) -> 35 Lumens (38h) -> Strobo 1800 lumens
Peak power: 21100 candles
Maximum illumination distance: 290m.
Ignition method: Rear button with "Momentary On" system for light signals and Rear "Mode" button to immediately access the strobe function, which remains active as long as the button is pressed
Light selection method: With the flashlight on, pressing the rear "Mode" button
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: Works with a rechargeable 21700 rechargeable battery (NL2140i, 4,000mAh) (included in the package). If necessary, it can also work with 2x CR123 3.0V without being able to reach 1800 lumens of power
Measurements: 14.7cm (L) - 2.54cm (D stem) - 2.54cm (D head)
Weight: 84g. batteries excluded
Accessories: wrist strap, NTH10 tactical polymer sheath, spare o-ring, clip
Water resistance: as per IPX-8 standard, submersible up to 2m. of depth for 30min.
Sheath: Tactical sheath compatible with molle bindings
Impact resistance: withstands drops from 1.5m in height

Italian Warranty Nitecore Italia: Torch guaranteed 5 years - Battery guaranteed 12 months

The first Nitecore flashlight that works with a powerbank and is controlled wirelessly via a wrist remote control!

KEY FEATURES:

• Adjustable and swiveling dual output headlamp for Spot and Flood light
• The Spot light uses 4 CREE LEDs with a maximum output of 1,600 lumens, an intensity of 6,570cd and a lighting distance of 162 meters
• The Flood light uses a CREE LED with wide angle illumination optics, up to 170 ° amplitude
• There are 10 adjustable and mixable Spot / Flood brightness levels
• Adjustable both directly on the torch and with a wireless remote control from the wrist
• 100 ° vertical tilt angle to meet different lighting needs
• Highly efficient constant current circuit provides stable light output
• Convenient USB-A socket, compatible with universal USB power sources
• ATR (Advanced Temperature Regulation) technology for temperature regulation
• Front band included, light and breathable
• Constructed from aircraft grade aluminum alloy
• Rugged HAIII military specification anodizing
• Resistant to water and dust as per IP67 standard
• Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL DATA:

LED: 4x Cree XP-G3 S3 + 1x Cree E2 XHP35 HD with life cycle of 50,000 hours
Output 5 diffused light outputs and 5 deep light outputs, digitally adjusted, constant and mixable with each other as needed
Spot powers and durations: 5 lumens (45h.) -> 50 lumens (23h.) -> 200 lumens (9.30h.) -> 480 lumens (5h.) -> 1600 (4h.)
Flood powers and durations: 5 lumens (45h.) -> 50 lumens (21h.) -> 200 lumens (7.30h.) -> 480 lumens (4.30h.) -> 1200 (3h.)
Range: up to 162m.
Peak of power: 6570 candles
Usable batteries: powered by USB powerbank * (not included - sold separately) such as Nitecore F4 or Nitecore NB10000
Torch dimensions: 47.6x43.2x42.1 mm.
Weight: 142.5g (support and headband included, power supply not included)
Lens: hardened glass with anti-reflective treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Water resistance: water resistant as per IP67 standard
Included Accessories: 2x USB Clip - Front Band - Wireless Wrist Remote Control

Note: The data shown was measured in accordance with the international ANSI / PLATO FL 1-2019 lighting test standard using a 5,000mAh Power Bank under laboratory conditions. The data may vary slightly in actual use conditions due to the type of power supply used, usage habits and environmental factors.

* Nitecore recommends using power sources with an output of at least 18W and QC system, otherwise the TURBO level will not be available.

FREQUENT QUESTIONS:
Q: is the flashlight compatible with the battery pack of the Nitecore HC70 model?
A: It is compatible, but it stops at 480 lumens of expressed power.

Q: Is the flashlight compatible with the Nitecore F1 / F2 / F4 charger / powerbank?
A: It is compatible, but it stops at 480 lumens of expressed power.

Q: is the flashlight compatible with the Nitecore NB10000 powerbank?
A: Yes, it is perfectly compatible and can produce 1600 lumens of power.

Key Features:
* Revolutionary and extremely advanced keychain flashlight
* Uses two LEDs capable of producing a maximum light of 500 lumens
* Maximum peak intensity of 2,000cd and maximum illumination distance of 89 meters
* Uses a totally transparent optical lens to ensure uniform and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charge time etc.
* Built-in 280mAh Li-ion battery
* APC (Advanced Power Cut-Off) technology to minimize consumption when not in use
* Integrated Li-ion battery charging system via USB-C plug
* High efficiency circuits to ensure continuous lighting up to 60 hours
* 5 selectable brightness levels with direct access to TURBO mode
* 2 adjustable lock levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and tearing up to 30kg

Technical data:
Led: 2x Osram P8 with a life cycle of 50,000 hours
Brightness levels: 5 light powers, selectable with the appropriate dedicated button
Powers and Durations: 500 Lumens (0.15h.) -> 200 Lumens (0.45h.) -> 65 Lumens (2.30h.) -> 15 Lumens (8h.) -> 1 Lumen (60h.)
Peak of power: 2000 candles
Maximum illumination distance: 89 m.
Power on method: Power on and off button
Light selection method: Light selection button
Body: Aviation aluminum with HA III anodization degree
Battery: Integrated 280mAh Li-Ion type, equipped with integrated USB-C type charging system
Measurements: 4.6cm (Length) - 2.5cm (Width) - 1.25cm (Thickness)
Weight: 18.8g. battery included
Accessories: steel ring for hooking to the key ring
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via USB-C port (cable and power supply not included in the package; compatible with power supplies and cables for smartphones and tablets commonly found); while charging, the integrated display will show the status. The charging system automatically prevents undervoltage, overvoltage and has built-in protection against short circuits. - The rear hook of the flashlight, designed to anchor it to a key ring or other equipment, resists a traction of up to 30kg.

Powers and durations certified in the laboratory by ANSI / PLATO FL 1-2019 standards

KEY FEATURES:

* 11 modes available with 5 light sources
* Possibility of continuous light or flashes in 5 different colors
* Built-in lithium-ion battery with a maximum autonomy of 50 hours
* Rechargeable with built-in USB-C port
* One-handed operation of the torch, via a single button
* An indicator light in the flashlight indicates the remaining battery charge (Patent No. ZL201220057767.4)
* Ultralight bracket, with Velcro hooks on the back
* Made of sturdy and quality plastic materials
* Extremely lightweight and pocket-sized design
* Withstands impacts and falls up to 1 meter in height

COMPLETE TECHNICAL SPECIFICATIONS:

Led: 5x high power LEDs, white, red, blue, yellow, green, with a life cycle of 50,000 hours
Operating Modes: 5 colored flashes and a special mode (police warning with blue / red light)
Powers and Durations: Red 3 lumen 50 hr - Green 8 lumen 50 hr - Yellow 9 lumen 50 hr - White 15 lumen 40 hr - Blue 2 lumen 40 hr - Red / Blue 40 hr

Power on and selection method: Central button for power on, off and light selection
Body: thermoplastic materials
Battery: integrated, not removable, 300mAh Li-Ion, rechargeable via MicroUSB-C plug
Torch measurements with bracket: 61.8mm (Length) - 28.9mm (Width) - 21.7mm (Thick.)
Torch weight: 24.5g.
Weight with bracket: 35.5g.
Accessories: support bracket with hooks for the front and rear velcro - USB charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands drops from 1m in height
Note: -

Real powers and durations, certified in the laboratory by ANSI / NEMA FL1 standards

NU series product specially designed for law enforcement.
The NITECORE NU07 LE is a USB-C rechargeable mini sign light with 11 modes and 5 light sources with constant lighting or flashing red, green, yellow,
white / blue and red / blue police alarm.

The completely transparent shell makes the signals identifiable in all directions.

The flashing colors can indicate different groupings or allow for quick identification of team members in specific positions.

Thanks to the ARC adapter it can be attached to the helmet for special operations with quick and secure attachment.

Thanks to the innovative design of the rear clip, it can be easily attached to the standard MOLLE system.

The hook and loop attachment on the back of the bracket ensures a firm and secure fit.
The slots located on both sides of the bracket allow you to strengthen the attachment by fixing the helmet cable or the elastic to prevent accidental loss.

The single button interface is easy to use with a built-in 300mAh rechargeable lithium-ion battery allowing for up to 50 hours of runtime.

The waterproof design makes it IP66 rated.

The body is constructed of solid and durable PC materials with an ultra-light and compact design.

Ultra-transparent green filter with rubber body adaptable to different types of torches with 25 / 25.5mm diameter heads.

This filter transforms the beam of your flashlight into a green light that is excellent for use at the same time as night vision goggles and suitable for not frightening animals. Also suitable for tactical reading of maps and various documentation.

Compatibility:

NITECORE: P10 V2 - P12 - P12GT - P12GTS - MH10 - MH12 - MH12GT - MH12GTS - MH12 V2 - MH12S

Filtro azul ultra transparente con cuerpo de goma adaptable a diferentes tipos de antorchas con cabezas de 25 / 25,5mm de diámetro.

Este filtro transforma el haz de tu linterna en una excelente luz azul para ser utilizada al mismo tiempo que las gafas de noche y adecuada para no asustar a los animales. También es adecuado para la lectura táctica de mapas y documentación diversa.

Compatibilidad:

NITECORE: P10 V2 - P12 - P12GT - P12GTS - MH10 - MH12 - MH12GT - MH12GTS - MH12 V2 - MH12S

Ultra-transparent red filter with rubber body adaptable to different types of torches with 25 / 25.5mm diameter heads.

This filter transforms the beam of your flashlight into excellent red light to be used together with night vision goggles and suitable not to scare animals. Also suitable for tactical reading of maps and various documentation.

Compatibility:

NITECORE: P10 V2 - P12 - P12GT - P12GTS - MH10 - MH12 - MH12GT - MH12GTS - MH12 V2 - MH12S

Accessory for Nitecore tactical flashlights made of aeronautical aluminum with HA III type military anodization, it is compatible with any flashlight that has a 1 "(2.54cm) diameter barrel.

Compatible with Picatinny rails, it has dimensions of 71mm (height) x 30mm (width) x 31mm (length) and a weight of 73g.

* Easy to attach and remove
* Central fixing screw that does not require tools
* Compatible with 1 "/ 2.54cm cylindrical shaft flashlights

Led: 1x Cree XP-G3 S3 - with a life cycle of 50,000 ore
Modi Operativi: Ambidextrous pulsation for an easy access to the 3 luminous functions - Prize and one of the lateral pulsation for accessing the momentary tattic modality (Momentary-On), briefly award one of the pulsating for accessing the constant lighting modality (Costant-On) , premi three turn one of the pulsating for the Strobe modality (Strobe-On), using frequency strobe non-linear for effetti vertiginosi più forti.
Potenze e Durate: 460 lumens (0.3h) 40 lumens (3h45min) - Strobo 300 lumes
Picco di potenza: 1440 cd
Distanza di illuminazione massima: 76m.
Metodo di accensione: doppio interruttore, ambidextrous, posto ai lati della torcia
Metodo di variazione luminosa: doppio interruttore, ambidextrous, posto ai lati della torcia
Testa: aeronautical aluminum
Corpo: aeronautical aluminum
Finitura: anodized, Type III
Lens: ultra-transparent indurito vetro with anti-reflective treatment
Batterie: works with a CR123A battery (included in the package)
Misure: 6.4cm (Lunghezza) - 3.6cm (Larghezza) - 3.3cm (thickness, slitta included)
Weight: 89.6g. with inserita batteria
Accessori: o-ring
Waterproofing: comes standard IP67
Resistenza agli impatti: withstands expiry of 1m. say altezza
Note: Slitta di aggancio universale fast, compatible with Picatinny and Weaver systems

Designed exclusively for Nitecore i4000R torches and Nitecore lighting systems of the 21700i series

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery
* Nominal voltage: 3.6V
* Capacity: 5000mAh
* Positive Pole: Flat and present on the lower and upper part of the flashlight
* PCB protection circuit for internal voltage protection
* PCB protection prevents 2.5V undervoltage and 4.25V overvoltage
* Continuous Discharge Capacity: 15A

BATTERY PRECAUTIONS
* Do not leave the batteries unattended during the charging phase
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries
* We are not responsible for misuse or reverse polarity of the batteries

TORCH COMPATIBILITY
works only with NITECORE i4000R torches and NITECORE 21700i series lighting systems - NOT COMPATIBLE WITH OTHER PRODUCTS

Designed for high power torches and devices that require a high amperage in the continuous discharge phase.

The new Nitecore NL2150HPR is a revolutionary 21700 type battery: it is in fact designed with an integrated USB-C type charging port so that it can be recharged directly using a USB charging cable (sold separately).

Just connect the battery to an available USB power source (for example to a PC or a wall charger for tablet or smartphone) and a red light next to the positive pole of the battery will light up to inform you that the charging process is started. As soon as the light turns green, charging will be complete.

Alternatively, these batteries can be charged normally, like any rechargeable battery, ie using any external charger compatible with 21700 Li-Ion batteries.

Equipped with built-in intelligent charging circuits and other safety features, this battery operates safely while following the precautions listed.

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery
* Nominal voltage: 3.6V
* Capacity: 5000mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection
* PCB protection prevents 2.5V undervoltage and 4.25V overvoltage
* Continuous Discharge Capacity: 15A

USB Charging Voltage: 5V
USB Charging Current: 5A (Max)

BATTERY PRECAUTIONS
* Do not leave the batteries unattended during the charging phase
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries
* We are not responsible for misuse or reverse polarity of the batteries

TORCH COMPATIBILITY
recommended for the NITECORE E4K model

Led: 2x Osram P8 with a life cycle of 50,000 hours and with a lighting diameter of 100 °
Operating Modes: 4 light powers, selectable with the dedicated button
Powers and Durations: 700 Lumens (15min.) -> 180 Lumens (1.30h.) -> 30 Lumens (8h.) -> 1 Lumen (50h.)
Power peak: 2100 candles
Maximum illumination distance: 74m.
Ignition method: Front on / off button
Light selection method: Front light selection button
Body: aviation aluminum with HA III anodizing degree
Batteries: Li-Ion, included, non-removable, equipped with an integrated MicroUSB type charging system
Measurements: 6.0cm (Length) - 2.45cm (Width,) - 1.38cm (Thickness)
Weight: 26g. - battery included
Accessories: double steel ring for hooking
Waterproofing: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via USB-C port (cable not included in the package); during charging, an integrated LED will show the status and will automatically turn off when charging is complete. The charging system automatically prevents undervoltage, overvoltage and has an integrated protection against short circuits. - The rear hook of the torch, designed to anchor it to a key ring or other equipment, resists traction of up to 30 kg.

Powers and durations certified in the laboratory by ANSI / PLATO FL1-2019 standards

NITECORE NSH10 is a multipurpose carabiner made of TC4 titanium alloy.

Inspired by the design of the carabiner used as essential tools for rock climbing or bungee jumping, the NSH10 is a reliable tool for fixing or hanging external objects. Comfortable and versatile, it can be used as a key ring, bottle opener, hanging hook or flathead screwdriver.

Type of production: industrial
Country of production: China

Functions:

* keychain
* bottle opener
* hook
* open parcels
* flathead screwdriver

Material: titanium
Length and width: 49mm x 25.5mm
Thickness: 3.8mm
Weight: 7.5g

You can recharge it normally, inserting it in a charger or recharge it like a mobile phone: inserting a USB-C cable!

The new Nitecore NL2150R is a revolutionary 21700 type battery: it is in fact designed with an integrated USB-C charging port so that it can be recharged directly using a USB charging cable (sold separately).

Just connect the battery to a available USB power source (for example to a PC or to a wall charger for tablet or smartphone) and a red light next to the positive pole of the battery will light up to inform you that the charging process is started. As soon as the light turns green, charging will be completed.

Alternatively, these batteries can be charged normally, like any rechargeable battery, i.e. using any external charger compatible with Li-Ion 21700 batteries.

Equipped with integrated intelligent charging circuits and other safety functions, this battery works in complete safety respecting the precautions indicated.

 
BATTERY CHARACTERISTICS
* Rechargeable Li-Ion 21700 cylindrical battery
* Nominal voltage: 3.6V
* Capacity: 5000mAh
* USB charging voltage: 5V
* USB charging current: 5A (Max)
* Positive pole: Protruding
* PCB protection circuit for internal voltage protection
* PCB protection prevents 2.5V undervoltages and 4.25V overvoltages

BATTERY PRECAUTIONS
* Do not leave the batteries unattended during the charging phase
* Do not reload on carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries
* We are not responsible for incorrect use or with inverted polarity of the batteries

AVAILABILITY AVAILABLE FOR DELIVERY: from 20 July

ULTRAVIOLET LAMP WITH OZONE - STERILIZING SURFACE MAX 40m²

Key features:
* Removes up to 99.99% of spores, germs, viruses and bacteria. The lamp modifies pathogenic microorganisms, viruses, molds through UV light, DNA or RNA, preventing them from reproducing or being harmful. Ozone is a very active oxidant that destroys contact microorganisms, in addition ozone also acts as an environmental deodorant. One of the advantages of ozone is that it can be transported by air to places that UV radiation cannot directly reach.
* Effective against Coronavirus, Mushrooms, Rickettsia, Chlamydia etc.
* Broad spectrum, high potency germicide
* Sanitization with automatic shutdown for 15, 30 or 60 minutes
* Radial quartz lamps with UV-C ultraviolet technology
* Emission of O3 ozone cells for additional sterilization
* Radiation wavelength of 185nm and 254nm
* Simplified design for maximum functionality
* Easily transportable and positioned on flat or hanging surfaces
* Operating commands on the support base or by remote control
* Delayed start to allow the operator to safely leave

Sanitizing applications:
* Home environments
* Commercial structures (shops, offices, restaurants etc)
* Cold rooms
* Food processing plants
* Medical offices, veterinarians, hospitals and operating rooms
* Odor removal

Operating principles:
Germicidal lamps generate short-wave radiation of 185nm radially which, passing through the purest quartz, generate ultraviolet type C (UV-C) waves that are lethal to microorganisms. All surfaces touched directly by ultraviolet waves are therefore sterilized.
At the same time, radiation of 253.7nm produces abundant quantities of ozone (O3) in the surrounding air which, as a very active oxidant, destroys the microorganisms with which it comes into contact. This allows effective sterilization even on surfaces not directly touched by UV-C waves and on all textile surfaces, penetrating deeply and simultaneously eliminating any type of odor, acting as an environmental deodorant.

Technical data:
* Model: ZWXTD-02
* Body material: painted steel
* Lamp material: quartz
* Rated power: 40W
* Sterilizable surface: <40m²
* Operating voltage: 220V / 50Hz
* 40W lamp dimensions: 180x470 mm.
* Lamp weight 40W: 1030 g.
* Life cycle:> 8000 hours
* Control method: on the base or via remote control
* Power on: delayed by 10 seconds
* Operating timer: 15, 30 and 60 minutes

Manual or remote control operation:
1) Plug in the power outlet
2) press the button with the desired sterilization time
3) after 10 seconds, the lamp will turn on and remain active for the set time
ATTENTION: during sterilization the room must be left free by people and animals
4) at the end of the sterilization time, the lamp will automatically turn off
ATTENTION: before staying, ventilate the rooms for at least 40 minutes

Precautions for use:
* The lamp in operation emits ultraviolet radiation, dangerous for exposure, and ozone, dangerous for inhalation.
* Use only in unmanned rooms
* Dangerous for humans, animals and plants
* Do not look directly into ultraviolet light to avoid damage and photodermatitis
* Do not stand near the operating lamp
* Prolonged exposure to ultraviolet light can cause aging and burns to the skin
* Prolonged exposure to ozone can cause asthma and irritation to the respiratory tract
* Ventilate the room before staying to allow the ozone to escape
* Ozone can remain in the room for up to 30/40 minutes after the lamp is turned off

Original Nitecore remote ignition control to be used by replacing the rear cap of your flashlight; ideal for use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary switching on of the light by pressing the special remote rubber pad; the light will go out as soon as the pressure on the pad is stopped. It also integrates a standard power button on the side which allows the torch to be used normally.

Cap diameter: 28.6mm
Total length: 307mm

Compatible only with models:

NEW P12 - NEW P30

Led: 1x Osram P8 with a life cycle of 50,000 hours + 1x Red LED + 1x Blue LED
Operating Modes: 4 light powers, selectable with the specific dedicated button + Red Light + Blue Light + Flashing Red / Blue
Power and Durability: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) -> Red Light -> Blue Light -> Red / Blue Flashing
Peak power: 1260 candles
Maximum illumination distance: 71m.
Ignition method and light selection: Front button
Materials: aeronautical aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diameter)
Weight: 12g. - battery included
Accessories: steel ring for attaching to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light dives
Impact resistance: withstands falls from 1m in height
Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) - Additional red light - Additional blue light

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Led: 1x Osram P8 with a life cycle of 50,000 hours + 1x UV Led + 1x HI CRI led
Operating Modes: 4 light powers, selectable with the specific dedicated button + UV + white Flood Light + Warning Flash
Powers and Durations: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) -> UV -> Flood Light -> Warning Flash
Peak power: 1260 candles
Maximum illumination distance: 71m.
Ignition method and light selection: Front button
Materials: aeronautical aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diameter)
Weight: 12g. - battery included
Accessories: steel ring for attaching to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light dives
Impact resistance: withstands falls from 1m. of height
Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) - Additional 500mW and 365nm UV light - Additional "warm" white light HI CRI

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Green filter made of ultra-transparent hardened glass with rubber body, so that it can be adapted to different types of torches with 70mm diameter heads.

This filter transforms the beam of your torch into red light suitable for hiking, outdoor and for hunting purposes since it does not scare and alert the animals. Also suitable for tactical reading of maps and various documentation.

Compatibility: only for NITECORE MH40GTR

Original Nitecore remote ignition control to be used by replacing the rear cap of your torch; ideal to use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary lighting of the light by pressing the special remote rubber pad; the light will switch off as soon as the pressure on the pad is interrupted. Laterally it also incorporates a standard ignition button that allows the torch to be used normally.

Only compatible with models:

  MH12GTS, MH25GTS, P12GTS

Urban / hiking backpack made of Nylon 600 denier, very light and resistant, also designed to accommodate electronic devices and laptops up to 14 "

Features and Materials:
- 600 denier Cordura Nylon resistant to water and abrasion
- External treatment for fabrics that ensures resistance to dirt and facilitates maintenance
- Designed for intensive use
- Main compartment and front compartment both with full zip opening
- YKK hinges of Japanese production
- Ventilated backrest
- Reinforced handle and stitching
- Possibility of being used with a shoulder strap, a single shoulder, a handle or anchored to a trolley
- Quickly and easily adjustable shoulder strap detachable
- Front compartment with document holder and hooks for hanging keys
- Dimensions main main compartment: 40x25x7.5 cm.
- Front compartment dimensions: 33x20x2 cm.
- Weight: 0.95 kg.

Elegant, tactical and indestructible titanium pen, useful also as crystal crystals and for personal defense.

* Weight: 25g
* Total length: 142mm.
* Material: aluminum alloy
* Diameter: 1.4 cm.
* Glass breakage tip: tungsten steel
* Ink: black with Fisher PR4 Refill Schneider Gelion 39.

Elegant, tactical and indestructible titanium pen, useful also as crystal crystals and for personal defense.

* Weight: 36g
* Total length: 142mm.
* Material: titanium
* Diameter: 1.4 cm.
* Glass breakage tip: tungsten steel
* Ink: black with Refill Schneider Gelion 39.

AVAILABILITY AVAILABLE FOR DELIVERY: from 20 July

ULTRAVIOLET LAMP WITH OZONE - MAX STERILIZING SURFACE 100m²

Key features:
* Removes up to 99.99% of spores, germs, viruses and bacteria. The lamp modifies pathogenic microorganisms, viruses, and molds through light, DNA or RNA and therefore prevents them from reproducing or being harmful. Ozone is a very active oxidant that destroys contact microorganisms, in addition ozone also acts as an environmental deodorant. One of the advantages of ozone is that it can be transported by air to places that UV radiation cannot directly reach.
* Effective against Coronavirus, Mushrooms, Rickettsia, Chlamydia etc.
* Broad spectrum, high potency germicide
* Sanitization with automatic shutdown for 15, 30 or 60 minutes
* Radial quartz lamps with UV-C ultraviolet technology
* Emission of O3 ozone cells for additional sterilization
* Radiation wavelength of 185nm and 254nm
* Simplified design for maximum functionality
* Easily transportable and positioned on flat or hanging surfaces
* Operating commands on the support base or by remote control
* Delayed start to allow the operator to safely leave

Sanitizing applications:
* Home environments
* Commercial structures (shops, offices, restaurants etc)
* Cold rooms
* Food processing plants
* Medical offices, veterinarians, hospitals and operating rooms
* Odor removal

Operating principles:
Germicidal lamps generate short-wave radiation of 185nm radially which, passing through the purest quartz, generate ultraviolet type C (UV-C) waves that are lethal to microorganisms. All surfaces touched directly by ultraviolet waves are therefore sterilized.
At the same time, radiation of 253.7nm produces abundant quantities of ozone (O3) in the surrounding air which, as a very active oxidant, destroys the microorganisms with which it comes into contact. This allows effective sterilization even on surfaces not directly touched by UV-C waves and on all textile surfaces, penetrating deeply and simultaneously eliminating any type of odor, acting as an environmental deodorant.

Technical data:
* Models: ZWXTD-04
* Body material: steel
* Lamp material: quartz
* Rated power: 75W
* Sterilizable surface: <100m²
* Operating voltage: 220V / 50Hz
* Lamp dimensions 75W: 200x665 mm.
* Lamp weight 75W: 1380 g.
* Life cycle:> 8000 hours
* Control method: on the base or via remote control
* Power on: delayed by 10 seconds
* Operating timer: 15, 30 and 60 minutes

Manual or remote control operation:
1) Plug in the power outlet
2) press the button with the desired sterilization time
3) after 10 seconds, the lamp will turn on and remain active for the set time
ATTENTION: during sterilization the room must be left free by people and animals
4) at the end of the sterilization time, the lamp will automatically turn off
ATTENTION: before staying, ventilate the rooms for at least 40 minutes

Precautions for use:
* The lamp in operation emits ultraviolet radiation, dangerous for exposure, and ozone, dangerous for inhalation.
* Use only in unmanned rooms
* Dangerous for humans, animals and plants
* Do not look directly into ultraviolet light to avoid damage and photodermatitis
* Do not stand near the operating lamp
* Prolonged exposure to ultraviolet light can cause aging and burns to the skin
* Prolonged exposure to ozone can cause asthma and irritation to the respiratory tract
* Ventilate the room before staying to allow the ozone to escape
* Ozone can remain in the room for up to 30/40 minutes after the lamp is turned off

The Nitecore NCP30 tactical sheath is a robust, multifunctional product, ideal for torches and multipurpose.
The scabbard also offers a small side compartment for carrying pens and penlights.
Made of 900D Cordura Mil-Spec Nylon, the ncp30 sheath can be easily mounted on a belt or
other MOLLE systems.

Compatible torch models:
EA21 EC20 EC25 MT25 MT2C MT20C MT06 P20 P20UV P10 P12 SRT5 MH2C MH10 MH12

Measurements:

Item weight: 54.4 g
Product dimensions: 8.4 x 4.3 x 2.5 cm

Diffusore luminoso in materiale plastico robusto, durevole, anti-urto e resistente ad alte e basse temperature da fissare sulla testa delle torce Nitecore con testa di diametro di 4cm.

Questo diffusore trasforma la vostra torcia in una pratica bacchetta di segnalazione; la luce arancione è ottima per segnalare situazioni di emergenza o per un uso professionale di controllo del traffico.

Materiale: plastica PC2805 realizzata da Bayer Material Science AG
Lunghezza: 18cm
Diametro: 3,95cm

NITECORE: EA4 - EA41 - P15 - P16 - P25 - SRT7 - CR6 - CI6 - CU6 - MH25 - MH25GT - MH25S - MH27 - MH27UV - TM03 - TM9K - TM9K TAC

The NITECORE NL1475R is a 750mAh 14500 micro-USB rechargeable battery that's compatible with multiple 14500 flashlights, headlamps and other electronic powered devices. No charger is needed to recharge this battery, it's equipped with a built-in micro-USB port that allows users to charge the battery directly using any compatible USB power source. Yet, the battery does have the ability to recharge using a traditional charger providing multiple recharge options for users. The NL1475R is equivalent to 500 pairs of non-rechargeable batteries and has a life span of over 500 recharge cycles, helping to reduce the cost of energy to users over time. 

The battery boasts multiple external safety mechanisms like a microporous barrier to defend internal components and a pressure relief valve to protect against rapid temperature increases and explosions. A built-in high-performance protection circuit protects the battery from overcharging, over discharging and short-circuiting to prevent damage and prolong battery life.

NITECORE NL1475R Specifications

• Battery Type: 14500
• Capacity: 750mAh
• Output: 2A
• Voltage: 3.6V
• Length: 1.95" (49.5mm)
• Diameter: 0.56" (14.2mm)
• Weight: 0.66oz (18.6g)

NITECORE NL1475R Features

• Integrated micro-USB charging port
• Compatible with traditional battery chargers
• Pressure relief valve protection for rapid temperature increases
• Microporous barrier to protect internal components
• High performance protected circuit automatically protects against overcharge, over discharge and short-circuiting
• Nickel-plated stainless steel protectors
• Certified by International Standards

Package Contents: NITECORE NL1475R 750mAh 14500 Micro-USB Rechargeable Battery

CARATTERISTICHE BATTERIA

* Batteria ricaricabile Li-Ion 18650 cilindrica
* Voltaggio nominale: 3.6V
* Capacità: 3500mAh - 8A
* Polo Positivo: Sporgente
* Circuito di protezione PCB per la protezione interna del voltaggio
* La protezione PCB previene i sottovoltaggi a 2.5V e i sovravoltaggi a 4.25V

PRECAUZIONI BATTERIA

* Non lasciare incustodite le batterie durante la fase di carica * Non ricaricare sopra tappeti, tavoli in legno o materiali infiammabili
* Non siamo responsabili per danni derivati dalla manomissione delle batterie
* Non siamo responsabili per un uso incorretto o con polarità invertite delle batterie

SPECIFICHE TECNICHE BATTERIA

* Capacità: 3500mAh nominali
* Dimensioni: 18+/-0.2 mm diametro x 66+/- 0.2mm altezza
* Peso approssimativo: 47g
* Voltaggio nominale medio: 3.6V
* Voltaggio di picco: 4.2V
* Potenza: 8A
* Cicli vitali: > oltre i 500 cicli

Accessorio per torce Nitecore

- attacco fucile creato appositamente per i modelli Nitecore
- compatibile anche con modelli di altre marche con fusto di diametro di 1" / 2.54cm

Attraverso questo attacco, è possibile fissare una torcia ad un fucile o a qualsiasi tipo di supporto cilindrico tramite doppio aggancio magnetico.
- Materiali: alluminio aeronautico anodizzato
- Misure: 50mm lunghezza x 65mm altezza
- Diametro utile torcia: da 24mm a 27mm

The new Nitecore NL1834R 18650 battery is a revolutionary battery designed with a built-in micro-USB charging port making charging easier than ever! No more need for an extra charger as this battery can be charged directly using a standard micro-USB charging cable (sold separately). Simply plug the battery into an available power source and a red indicator light under the + pole will turn green upon completion. Alternatively, these batteries can still be charged on an external charger if desired. The NL1834R batteries are designed for powering high drain devices such as high-output flashlights, lanterns, headlamps, and bike lights, as well as a variety of other appliances and devices. With built in smart charging circuitry built and other integrated safety features through-out, this battery will safely work in the majority of button-top compatible devices.

Features & Specifications:
Type: Nitecore NL1834R 18650 3.7V Protected Li-ion rechargeable battery
Capacity: 3400mAh
Voltage: 3.7V
Output: 12.24Wh
USB Charging Voltage: 5V
USB Charging Current: 800mA (Maximum)
Chemistry: Lithium-ion
Weight: 1.52oz (47.3g)
Length: 2.68in (68mm)
Diameter: 0.72in (18.3mm)
Protected: Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V
Recharge: up to 500+ cycles
Red & Green charging indicator LED's
Microporous barrier and pressure release valves help protect the battery and prevent damage caused by rapid expansion & combustion
12 Month Warranty Period

Il caricabatterie Intellicharge i8 EU è universale, intelligente ed ultra rapido. Riesce ad identificare automaticamente che tipo di batteria avete inserito: Litio (LiFePo4, IMR o Li-Ion come le CR123A, le 18650 o le 14500) o Alcaline (Ni-MH e Ni-Cd come le stilo AA o ministilo AAA e mezze torce C) ed applica autonomamente la corretta tensione di carica ed il corretto voltaggio. Ognuno degli 8 slot di ricarica è gestito indipendentemente da un microprocessore capace di monitorare le batterie. Il sistema ottico di carica aiuta inoltre a tenere tutto sotto controllo indicando sia la percentuale di carica raggiunta che la carica terminata.

Semplicissimo da usare: basta inserire la batteria, al resto pensa a tutto lui!

Caratteristiche:
* Carica da 1 a 8 batterie simultaneamente
* Ogni slot di ricarica è indipendente
* Identificazione automatica del tipo di batteria inserita
* Identificazione automatica del voltaggio
* Identificazione automatica del tipo di carica (CC, CV e TC)
* LED a colori per monitorare il progresso di carica
* Spegnimento automatico della carica al completamento
* Protezione contro l'inversione di polarità
* Dissipazione del calore ottimale
* Utilizzabile sia su rete fissa che con presa accendisigari da auto (non inclusa)
* Certificazioni CE e RoHS

Specifiche Tecniche:
* Voltaggio Input: AC110-220V 50/60HZ o DC 12V 3A
* Potenza Input: 30W
* Output Voltaggio: 4.2V / 1.48V
* Output Corrente: 1500mA x 1/2 slot - 1000mA x 3/4 slot - 750mA x5/6 slot -  500mA x7/8 slot
* Dimensioni: 117x101x134.50 mm.
* Peso senza batterie: 488.2g.
* Compatibile con batterie IMR / Li-Ion: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 22500, 22650, 25500, 26500, 26650
* Compatibile con batterie Ni-MH / Ni-CD: AA, AAA, C, D

Precauzioni:
* Non ricaricare tipi differenti di batterie oltre a quelli indicati
* Non lasciare incustodite le batterie durante le operazioni di ricarica
* A batterie cariche, togliere le batterie dal caricabatterie prima di estrarre la presa elettrica per prevenire lo scaricamento delle batterie stesse

Pratica borsa in Cordura, leggera e resistente, pensata per riporre e trasportare torce a LED, coltelli chiudibili, coltelli multiuso e pinze multiuso oltre a chiavi, portafogli, oggetti elettronici etc.

Utilizzabile sia a maniglia, che a tracolla, che tramite attacchi compatibili MOLLE. - Offre due capienti vani compartimentati chiusi indipendentemente con zip.

Caratteristiche e Materiali:

- Cordura Nylon a 1000 denari resistente all'acqua e alle abrasioni con parti in velluto sintetico
- Trattamento esterno per tessuti che assicura resistenza allo sporco e facilita la manutenzione
- Pensata per un utilizzo quotidiano o per escursioni
- Tasche a scomparti per permettere l'alloggiamento di differenti utensili
- Interno morbido per proteggere gli utensili ospitati
- Elastici interni in Nylon per modulare al meglio gli utensili ospitati
- Operatività completa da ambidestro
- Sistemi posteriori di aggancio tipo MOLLE, in nylon ad alta resistenza
- Maniglia con grip rinforzato
- Tracolla in Nylon regolabile
- Pesa solamente 300g
- Comparto frontale di 17x15x2cm
- Comparto posteriore di 22x16x4cm