Anno 2019

Faithful unofficial reproduction of the sword used in the film Kill Bill

Blade: folded carbon steel - not sharp
Hamon: in style to note
Hi: -
Blade length (without habaki): 70cm.
Motohaba: 3.1cm.
Sakihaba: 2.1cm.
Sori: 2cm.
Blade thickness: 8mm.
Kissaki: 4cm.
Tsukamaki length: 26cm.
Total length: 103cm.
Weight: 1136g.
Balance: advanced, 12cm from tsuba
Saya: black lacquered wood with gold-colored engravings
Tsuka-gawa: black leather on same (ray skin) white
Sageo: gold cotton
Tsuba, Fuchi and Kashira: antiqued metal with gilding
Habaki and Menuki: golden metal
Seppa: golden metal
Notes: removable with double mekugi - the sword is accompanied by a cotton bag - wooden support and maintenance kit - This sword is not accompanied by film licenses but we offer it anyway resulting in a good quality level

Small technical glossary: ​​Hamon: temper line on the blade * Hi: deep groove in the blade, also called blood-cola * Saya: sword sheath * Tsuka: handle * Tsukamaki: weave on the handle * Tsuka-Ito or Tsuka-gawa: webbing cotton, silk or leather that wraps the handle * Tsuba: guard * Fuchi: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which the Sageo is linked * Motohaba: height of the habaki blade * Sakihaba: height of the kissaki blade.

These handcrafted iaito stand out for their classic line and for their functional quality, which is well coupled with the traditional manufacturing techniques and the materials used.
The blades are carbon hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered to 60 HRC for excellent cutting, penetration and flexibility. The blade is then hand-polished on stone and the sword is finished in every single detail.

Given the high craftsmanship nature of these swords, we would like to clarify that the photo is purely for illustrative purposes as designs of tsuba fuchi and kashira may differ from the one shown here as well as the weights and measures of the sword may differ, albeit slightly. .

Blade: in DNH7 steel with high carbon content with selective clay hardening 60 / 40HRC not sharpened
Hamon: irregular Gunome style
Hi: bo-hi
Blade length: 71.5cm.
Motohaba: 3cm.
Sakihaba: 2.2cm.
Sori1.5cm
Blade thickness: 5.5mm.
Kissaki: 3.5cm.
Tsukamaki length: 25.5cm.
Total length: 102.5cm.
Katana weight: 910g.
Weight with Saya: 1170g.
Balance: advanced, at 12.5cm. from Tsuba
Saya: black lacquered wood and buffalo horn
Tsuka-ito: -
Sageo: -
Tsuba: antiqued metal
Fuchi, Kashira, Menuki, Seppa and Shitodome: bronze
Country of production: Cambodia
Habaki: copper
Note: -

Small technical glossary: ​​Hamon: temper line on the blade * Hi: deep groove in the blade, also called blood-cola * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: weaving in cotton, silk or leather that wraps around the handle * Tsuba: guard * Fuchi: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cord of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which the Sageo is linked * Sori: curvature of the blade

This extraordinary medieval dagger is the ideal companion for the Accolade sword.
The carbon steel blade has stamped the seal of the Knights Templar, while the knob has an inlaid cross.
Beautiful leather sheath.
Blade: carbon steel
Handle: brown leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather
Blade length: 260mm.
Handle length: 100mm.
Total length: 420mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 565g.
Weight with sheath: 713g.

Robert I Bruce was king of Scotland from 1306 to 1329. Of Norman and Scottish Gaelic ancestry, he was one of the greatest kings of Scotland, and also one of the most famous warriors of his era. He led Scotland against the Kingdom of England during the Scottish Independence Wars.
He was the great-grandson of David I of Scotland and was often at odds with the Scottish hero William Wallace.

Sword characteristics:

- Total length: 110 cm
- Blade length: 92 cm
- Blade: in High Carbon Steel
- Handle: metal and leather
- Weight: 1.35 kg
- Thickness: 4 mm
- Accessories: sheath and belt in
- Blocking: 13cm from the guard branch

aikuchi

processing
The blades are carbon-hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (breed skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 170mm. (including habaki)
Total length: 275mm.
Weight: 210g. without saya

Note: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.

The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.

The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.

Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -

Reproduction of an Italian dagger of the 14th / 15th century.

The shaped handle and the fishtail pommel, combined with an elegant guard, give it a regal appearance. The long blade has a central reinforcement rib that allows it to support heavy lunges. Excellent overall balance and handling speed.

Steel blade with high carbon content, through tang. Guard and knob in nickel-plated metal.

Blade: carbon steel - NOT SHARP
Handle: brown leather
Knob: carbon steel
Guard: nickel-plated metal
Sheath: brown leather and steel
Blade length: 338mm.
Handle Length: 165mm.
Total Length: 502mm.
Blade width: 30mm.
Blade thickness: 6.7mm.
Weight: 464g.
Weight with Sheath: 552g.

Reproduction of the Italian Renaissance dagger potentially worn on the belt by Lorenzo de 'Medici. Said Lorenzo the Magnificent (Florence, 1 January 1449 - Careggi, 8 April 1492), he was lord of Florence from 1469 to his death, the third of the Medici dynasty. He was also a writer, patron, poet and humanist, as well as one of the most significant politicians of the Renaissance, both for having incarnated the ideal of the humanist prince, and for the very careful management of power.

The cut-free dagger on both sides is made of carbon steel, with precise and accurate workmanship and leather finishes. The hilt and the knob are in steel and the handle is covered in soft black leather. Comes with a leather sheath and steel fittings.

Blade: carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 280mm.
Handle Length: 95mm.
Total Length: 415mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 448g
Weight with Sheath: 542g.

Citadel - Iaito

These craftsmen stand out for their classic line and their functional quality, which is well matched with traditional manufacturing techniques and the materials used.
The blades are carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished by hand on stone and the sword is finished in every single detail.

Given the high nature of these swords, we would like to point out that the photo is purely for illustrative purposes as tsuba designs kits and kashira may differ from the one shown here as they could differ, albeit slightly, the weights and measures of the sword .

Blade: in DNH7 steel with high carbon content, 60 / 40HRC clay, not sharpened
Hamon: irregular Gunome style
Hi: bo-hi
Blade length: 71.5cm.
Motohaba: 3cm.
Sakihaba: 2.2cm.
Sori1.5cm
Blade thickness: 5.5mm.
Kissaki: 3.5cm.
Tsukamaki length: 25.5cm.
Total length: 102.5cm.
Katana weight: 910g.
Weight with Saya: 1170g.
Balance: advanced, at 12.5cm. from Tsuba
Saya: black lacquered wood and buffalo horn
Tsuka-ito: black silk on same (purebred leather) white
Sageo: -
Tsuba: antique metal
Fuchi, Kashira, Menuki, Seppa and Shitodome: bronze
Country of production: Cambodia
Habaki: copper
Notes: The sword is sold with a silk katana bag and a black cordura carrying case.

Piccolo glossario tecnico: Hamon: linea di tempra sulla lama * Hi: profondo solco nella lama, detto anche colasangue * Saya: fodero della spada * Tsuka-Ito o Tsuka-gawa: intreccio in cotone, seta o pelle che avvolge l'impugnatura * Tsuba: guardia * Fuchi: ornamento tra guardia e manicatura * Kashira: ornamento alla fine della manicatura * Menuki: medaglioni posti sotto il cordame della manicatura * Habaki: collare che fascia l'inizio della lama * Seppa: guarnizioni della guardia * Shitodome: guarnizioni alle quali è legato il Sageo * Sori: curvatura della lama

Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (ray skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 122mm. (including habaki)
Total length: 222mm.
Weight: 110g. without saya

Note: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.

Type of production: Artisan
Country of production: Cambodia
Blade: in DNH7 carbon steel hand-forged with clay-selective hardening with 60 / 40HRC tempering
Habaki: in bronze
Tsuka: Magnolia wood and water buffalo horn, removable
Saya: Magnolia wood and water buffalo horn
Blade length: 175mm. (including habaki)
Total length: 278mm. (295mm. With scabbard)
Weight: 224g. without scabbard (306g. with scabbard)

Note: Since these are handmade knives and differ slightly in finishes from one another, the product you ordered may not be identical to the one represented in the images but may have minor color differences.

These artisanal products stand out for their classic line and their functional quality, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

Blade: in DHN7 steel with high carbon content with selective clay / 40 / 60HRC tempering and high degree of polishing.
Hamon: Gunome style
Bo-Hi: absent
Total length: 38.5cm.
Blade length: 23.3cm.
Blade thickness: 6.5mm. / 3mm.
Balancing: Advanced 2.5cm from Tsuba
Handle Length: 9.5cm.
Tanto weight: 372g.
Weight with Saya: 488g.
Saya: black lacquered wood, drowned gold leaves and buffalo horn finishes
Tsuka-ito: beige cotton on the same white (breed leather)
Sageo: absent
Tsuba, Fuchi and Kashira: in burnished and finely engraved metal
Menuki, seppa, shitodome: bronze
Habaki: copper
Notes: The Tanto is sold with a silk sheath and carrying case cordura.

Small technical glossary: ​​Hamon: hardening line on the blade * Hi: deep groove in the blade, also called bloodsucker * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather braid wrapping the handle * Tsuba: guard * Drones: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which is tied the Sageo * Sori: curvature of the blade

300 è un film del 2007 diretto da Zack Snyder con il supporto di Frank Miller, adattamento cinematografico del graphic novel 300; quest'ultimo è stato a sua volta ispirato a un altro film, The 300 Spartans, un racconto semi-storico della battaglia delle Termopili svoltasi nel 480 a.C.

Il film è stato girato con la tecnica del chroma key per riprodurre le immagini dell'originale fumetto. È uscito nelle sale negli USA il 9 marzo 2007, mentre in Italia il 23 marzo 2007.

Robusto e indossabile elmo utilizzato dai guerrieri spartani
Replica tratta dal film di "300"

Materiali: acciaio placcato bronzo anticato con allacciature in cuoio

Faithful reproduction of the helmet used by King Leonidas in the film "300".

Manufacturer: Windlass.

The helmet, wearable, is made of steel with a bronze-effect plating, leather lining, synthetic crest. Equipped with exhibition support.

Dimensions: about 30 x 45 x 20 cm, crest included.

Faithful reproduction produced by Windlass, of the sword taken from the movie "The Gladiator", epic film of 2000, directed by Ridley Scott and starring Russell Crowe.

Exhibition product

Blade: Carbon steel
Handle: in synthetic material, wood and bronze
Blade length: 75cm.
Total Length: 97cm.
Blade thickness: 3mm.
Balancing: advanced, at 3cm. from the guard branch
Sheath: in wood and leather with brass fittings
Weight: 1450g.