Anno 2019
-
Laguiole En Aubrac - Horn point - spring engraved with Maltese cross - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Maltese cross symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Stainless steel 12C27
Blade production: France
Handle: Blond cow horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -LEA-croce-m -
Laguiole En Aubrac - Horn Point - spring engraved with Pilgrim's Shell - VG10 in Sanmai - knife
The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.
The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration.
The back spring (with the Pilgrim's shell symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme.
The blade uses 67-layer Japanese VG10 rolled steel, manufactured by Takefu Steel.
Intended use: Regional/Collection
Type of production: artisanal
Blade: Damascus and Japanese VG10 rolled steel
Blade production: France
Handle: Blond Cowhorn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -aubrac-conchiglia -
Taidea - Sharpening stone 10000 grit - TP7100 - Synthetic stone
Synthetic water stone to sharpen knives and razors of good quality and with an excellent quality / price ratio.
Equipped with non-slip support with liquid collection tray and additional coarse grit abrasive stone for the maintenance and grinding of the main stone. The kit also includes a small pump to keep the stone hydrated and a support to maintain the agulation of the knife during sharpening.
Type: water sharpening stone made of corundumQuality level: Good
Country of production: China
Grain: # 10000
Stone size: about 200x80x20mm
Notes: equipped with non-slip support, containment tank and support base, grinding stone, hydration pump and sharpening guideL417100€61.48Only 0 leftOut of stock -
Taidea - Sharpening stone 1000/6000 grit - TP6610 - Synthetic Stone
Synthetic water stone to sharpen knives and razors of good quality and with an excellent quality / price ratio.
Equipped with non-slip support with liquid collection tray and additional coarse grit abrasive stone for the maintenance and grinding of the main stone. The kit also includes a small pump to keep the stone hydrated and a support to maintain the agulation of the knife during sharpening.
Type: water sharpening stone made of corundumQuality level: Good
Country of production: China
Grain: double-face # 6000 and # 1000
Stone size: about 200x80x30mm
Notes: equipped with non-slip support, containment tank and support base, grinding stone, hydration pump and sharpening guideL416610€61.48Only 0 leftOut of stock -
Laguiole - En Aubrac - Trappeur Olive knife - knife
Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.
Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:LEA-T-W -
Laguiole en Aubrac - Centre of Horn spring engraved with the Maltese Cross with blade sanmai - knife
Laguiole en Aubrac - Centre of Horn spring engraved with the Maltese Cross with blade sanmai - knife
Intended Use: Regional / Collection
Type of production: crafts
Blade: rolled steel damask and Japanese VG10
Production Lama France
Handle: Horn Cattle Blonde
Blade length: 100mm.
Blade Thickness: 3mm.
Length closed: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 104g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -aubrac-croce