collection knives

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: in like new condition
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: lacking certificate and packaging.
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Type of production: Handcrafted unique piece by Francesco Pachì made at the direct request of a customer
Country of production: Italy
Blade: stainless steel BG-42 with gold plated opening pin set with hard stone
Handle: gold-plated internal folders, satin-finished stainless steel heads, red micarta spacer, Loveless micarta handle and gold-plated hardware
Blade length: 57mm.
Blade thickness: 3mm.
Total length: 136mm.
Weight: 57g.
Sheath: lizard skin knife pouch
Locking system: Liner Lock
Notes: knife withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: January 2014 production, previously purchased.
* Condition: Brand new
* Commercially available: Discontinued and no longer available.
* Sharpening: Factory.
* Marks on blade: No
* Marks on handle: Small abrasions given by contact with scabbard.
* Box: Present and original
* Scabbard: Present and original
* Manuals, Certificates and Warranties: Warranty and maintenance sheet.
* Checked and Certified by our in-house laboratory



Intended Use: Heavy Utility

Production type: Midtech
Country of Production: USA
Blade: full tang in D2 steel at 59/60HRC
Blade treatment: Gunkote Green
Handle: polymer
Blade length: 115mm.
Blade thickness: 5.2mm.
Total length: 250mm.
Balance: advanced
Weight: 370g.
Sheath: polymer, with M.O.L.L.E. compatible multi-position attachments.
Packaging: cardboard box with Microtech logos, Maintenance and warranty information
Notes: produced in January 2014 - previously purchased - brand new

Alala - In ancient Greece, it meant "battle cry" or "war cry" and was the personification of the war cry in Greek mythology. ... Greek soldiers attacked the enemy with this cry to cause panic in their ranks. Its sturdy and comfortable design makes it a very comfortable everyday carry fixed blade with excellent ergonomics. Perfectly suited for daily cutting tasks, it is always ready to assist the user. The molded sheath is equipped with an active retention lever and a securing strap for convenient carry options. Made by the excellent people at KA-BAR Knives; in Olean, NY, USA.

Intended use: Tactical / Military

Production type: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 95mm.
Blade thickness: 4.8mm.
Total length: 200mm.
Weight: 135g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito/Carey - The Professional Grade series with a silver-colored box identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company founded by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in the USA production.

Intended Use: Survival / Utlity / Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless) outer cheeks
Blade treatment: Satin finish
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 365g.
Sheath: nylon, M.O.L.L.E. compatible.
Packaging: cardboard box with Fox logos
Notes: -

Japanese steel merges with Italian excellence.

For this new collaboration, between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we chose the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the Japanese V-Toku2 steel in 5mm Sanmai produced by the Japanese Takefu Steel instead of the Niolox used in the standard model. 

Specifically, the central sheet is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to ensure not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge retention along with easy resharpening and maintenance. At the same time, the blade has remarkable corrosion resistance and an important increase in resilience given by the type of extreme steel and laminated structure.

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available: No longer in production
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Not present
* Scabbard: In Kydex
* Manuals, Certificates and Warranties: NO
* Checked and certified by our internal laboratory

Intended Use: Tactical/Collection

Production Type: Semi-Industrial
Country of manufacture: USA
Blade: Carbon steel O1
Blade treatment: Grey Cerakote
Handle: G-10 Green
Blade length: 110mm. (100m. cutting edge)
Blade thickness: 4.6mm.
Total length: 230mm.
Balance: set back approx. 3 cm from the edge of the cheek piece
Weight: 260g. (353g. including scabbard)
Sheath: Kydex, with Kydex belt attachment
Packaging: Without box and certificates
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available -
* Sharpening: Factory
* Marks on blade: Slight, due to normal friction with the scabbard
* Marks on handle: No
* Box: Not present
* Scabbard: Kydex
* Manuals, Certificates and Warranties: NO
* Checked and certified by our internal laboratory

Intended Use: Tactical/Collection

Production Type: Semi Custom
Country of production: USA
Blade: D2 steel
Blade Treatment: Custom Flamed
Handle: G10 OD Green
Blade length: 128mm. (cutting edge 111mm.)
Blade thickness: 7mm.
Total length: 236mm.
Balance: slightly set back 2cm from the guard branch
Weight: 334g. (446g. with scabbard)
Sheath: kydex
Packaging: UNPACKED
Notes: -

The STA Sniper blade was designed for a USMC scout/sniper and STA training group instructor in Phoenix, Arizona. Medford wanted to offer something completely unique to the Sniper's craft and his particular needs.

A clever design that utilises the integration of innovative tools with classic knife elements for a perfect blend of form and function. The 1/2" spanner in the handle fits almost any scope mounting system ring, the hilt screwdriver adjusts to turret adjustments, the measuring marks on the back are extremely convenient for both scouting and sniping, and the LTRE (Look Through Range Estimator) can significantly improve sight distance estimation up to 400 metres. The blade is extremely robust for field work and the compact size allows easy placement in any kit/equipment.

Knife withdrawn from private collection - Unobtainable specimen, now out of production - Like new, perfect, undamaged, never taken out of the box - Complete with every certificate - Perfect original factory sharpening - Absolutely flawless specimen - Checked and certified by our in-house laboratory

Intended Use: Fighter / Tactical / Collection

Type of manufacture: Midtech
Blade: stainless steel CPM-S30V 55/57HRC
Country of Production: USA
Handle: Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Total length: 290mm.
Balance: set back 1cm. from the lower guard branch
Weight: 356g.
Sheath: by SpecOps, cordura
Notes: Discontinued and unobtainable specimen - withdrawn from private collection - New, intact, perfect, never used, with original box and warranty certificates

Intended Use: Tactical/Collection

Type of Production: Midtech
Country of Production: USA
Blade: D2 steel
Blade Finish: Black PVD
Handle: G10 and Titanium with Custom Bronze Finish anodizing
Blade Length: 90mm.
Blade thickness: 5mm.
Total Length: 190mm.
Thickness when closed: 12.5mm.
Balance: on the guard branch
Weight: 168g.
Locking mechanism: frame lock
Clip: titanium
Packaging: polymer tactical case with Medford logos
Notes: designed and built by Greg Medford

Knife from private collection - Knife in mint condition, brand new - Checked and certified by our in-house laboratory.

Intended Use: Collection / Heavy Duty

Type of production: Handcrafted
Country of manufacture: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 24mm.
Weight: 167g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: -
Notes: Limited Edition handcrafted by Dino Picco of Wander Tactical

Japanese steel blends with Italian excellence

For this 2021 collaboration, between the Collini Cutlery of Busto Arsizio and the Fox of Maniago, we have decided to propose the 609OD Bushman model, an excellent bushcraft knife produced by Fox of Maniago, using Japanese V-Toku2 steel in Sanmai. produced by Japanese Takefu Steel instead of the D2 used in the production model.

Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Technical features

Intended use: bushcraft - outdoor - collection
Type of production: Industrial
Production Lama: Italy
Blade: fulltang, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade treatment: satin
Handle: micarta
Blade length: 160mm.
Blade thickness: 5mm.
Total length: 290mm.
Thick when closed: -
Balancing: advanced
Weight: 369g.

Sheath: in leather, belt, ambidextrous, for horizontal or vertical carrying
Packaging: cardboard box with Fox logos
Bevel: flat with scandi-like sharpening, convex
Notes: Special and limited edition - since the cutting edge is made of carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.

Intended use: Collection / Sports / Machete

Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damask with 64HRC Hitachi Shirogami cutting edge
Blade treatment: -
Handle: Paracord Green
Blade length: 205mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 335mm.
Thick when closed: -
Balancing: -
Weight: 358g.
Closure: -
Clip: -
Sheath: ** LEATHER **
Packaging: Cardboard box
Notes: entirely handmade by Takeshi Saji

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a Japanese model such as the Core with a Japanese powder steel (sintered) and laminated (SanMai) by Japanese Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: in steel
Sheath: -
Packaging: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version Collini Cutlery, Sprint Run, with Japanese stainless steel by Takefu Steel SPG2 Laminate.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Intended use: Tactical / Collection

Type of production: Midtech
Country of production: Usa
Blade: in D2 steel
Blade treatment: Black PVD
Handle: G10 and titanium liners 6AL4V
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 230mm.
Thick when closed: 15mm.
Balancing: on the guard branch
Weight: 214g.
Closure: Liner Lock
Clip: in Black PVD stainless steel
Sheath: nylon case with zip
Packaging: cardboard box with Medford logos
Notes: Designed and built by Greg Medford

Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.

Purpose of use: Collection / Sportsman

Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade Treatment: -
Manicure: Green Canvas Micarta
Blade Length: 98mm.
Blade thickness: 5.5mm.
Closed length: -
Total length: 200mm.
Closure thickness: -
Balance: -
Weight: 250g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attachment
Packing: -
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG Knives

Purpose of use: Collection / Sportsman / Machete

Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Paracord
Blade Length: 125mm.
Blade thickness: 5mm.
Closed length: -
Total Length: 245mm.
Closure thickness: -
Balance: -
Weight: 205g.
Closure: -
Clip: -
Sheath: IN LEATHER
Packing: Carton box
Notes: Hand made entirely by Takeshi Saji

Kiku Matsuda is one of the most famous artists and scholars sharpening throughout Japan; probably in your collection is already a fruit knife of his passion: collaborates for several years with SOG, William Henry, Pro-Tech and Randall Kings developing to their bevels, and politure sharpening the blades.

Intended Use: Collection / Tactical

Type of production: Handmade
Production Country: Japan
Blade: D2 hardened carbon steel to 61 HRC
Handle: Green Canvas Micarta
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 232mm.
Balancing: Set back
Weight: 210g.
Sheath: Kydex with Tek-Lok attack
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project carried out in collaboration with SOG Knives

Kiku Matsuda Knives - Momose Gawa Fishing Knife KM-390 - Knife

Kiku Matsuda is a great fisherman and model Momose Gawa is his favorite for fishing in the river.

Intended use: Sport / Fishing

Type of production: Artisan
Production Lama: Japan
Blade: stainless steel 14C28N
Treatment Lama: acid
Handle: Black Canvas Micarta
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 170mm.
Thick when closed: -
Balancing: -
Weight: 74g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG Knives

Kiku Matsuda Knives - Yuki Kaze Knife KM-460 - craft knife

Intended Use: Collection / Sports / Tactical

Type of production: Artisan
Production Lama: Japan
Blade: carbon steel OU-31 hardened to 63/64 HRC
Treatment Lama: -
Handle: Black Canvas Micarta
Blade length: 176mm.
Blade thickness: 6,8mm.
Length closed: -
Overall length: 314mm.
Thick when closed: -
Balancing: -
Weight: 486g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG Knives

Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.

Destinazione d'uso: Collezione/Sportivo

Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: Black Canvas Micarta 
Lunghezza lama: 105mm.
Spessore lama: 5,5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 260g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show  "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year Awards 

Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.

Destinazione d'uso: Collezione/Sportivo

Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: Green Canvas Micarta 
Lunghezza lama: 98mm.
Spessore lama: 5,5mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 250g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show  "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year Awards 

Intended use: Tactical / Collection

Type of production: Custom
Lama production: Use
Blade: CPM-S35VN steel
Blade treatment: -
Handle: titanium and G10 Digital Green
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 170mm.
Thick when closed: 12.5mm.
Balancing: on the guard branch
Weight: 120g.
Closure: Frame Lock
Clip: in titanium
Sheath: -
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg Medford

Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .

Takeshi Saji - Mikatsuki 180 Black - Handmade Knife

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Green Paracord
Blade length: 205mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 335mm.
Thick when closed: -
Balancing: -
Weight: 358g.
Closure: -
Clip: -
Sheath: Wood painted
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Rockstead - Chu DLT - knife

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: Stainless steel with 64HRC Hitachi YXR7 to cover DLT571 3micron
Handle: in green paracord
Blade length: 120mm.
Blade Thickness: 6mm.
Overall length: 2150mm.
Weight: 284g.
Balancing: 1cm back from the lower branch of the guard
Sheath: Leather
Note: Product is out of print

Destinazione d'uso: Tattico

Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: CPM-3V Tool Steel
Trattamento Lama: Nitrurazione al titanio
Manicatura: G-10 con lavorazione 3D in colore Green + una coppia di guancette intercambiabili in G-10 in colore Black
Lunghezza lama: 80mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 184mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 227g.
Chiusura: -
Clip: -
Fodero: in Kydex, dotato di sistema opzionale e multiposizione PUP (Pals Universal Platform)
Confezione: Busta Trasparente
Note: Edizione Esclusiva e Limitata, non presente nei normali listini e cataloghi Strider, con loghi Monkey Edge incisi

Intended use: Collection / Steak / Sports

Production Type: Handmade
Production Blade: Italy
Blade: Stainless steel RWL34 to 60HRC
Treatment Blade: Mirror Polishing
Handle material: Loveless Canvas Micarta with 416 stainless steel guard and passing
Blade length: 98mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 62g.
Sheath: handmade and hand-sewn, leather with ostrich inserts
Notes: Handmaded by Cesare Tonelli, Maestro Coltellinanio CIC (Italian Knives Corporation)

Blade: 58HRC 440C Stainless Steel
Handle: Loveless Micarta
Blade Length: 87mm.
Blade Thickness: 5mm.
Overall Length: 199mm.
Weight: 172g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli

Blade: 59HRC 440C Stainless Steel
Handle: Loveless Micarta
Blade Length: 98mm.
Blade Thickness: 5mm.
Overall Length: 207mm.
Weight: 168g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.

Intended use: Collection / Sports / Machete

Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damask with 64HRC Hitachi Shirogami edge
Blade treatment: -
Handle: Paracord
Blade length: 140mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 290mm.
Thick when closed: -
Balancing: -
Weight: 250g.
Closing: -
Clip: -
Sheath: in wood
Packaging: Cardboard box

Spartan Blades - Phrike - Self-Defense Utility Desert - Knife

Type of production: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN 59/60HRC
Treatment Blade: Flat Dark Earth SpartaCoat
Handle: G-10
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Total length: 215mm.
Thick when closed: -
Balance: -
Weight: 115g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: -
Notes: Design by Iovito / Carey

The Spartan-Breed Fighter/Dagger is our first collaboration with knife maker, writer, and retired Green Beret, MSG(R) Kim Breed. The Breed Fighter/Dagger was produced with the goal of creating a sturdy fighter in the spirit of our Special Operations Forces. Daggers have come to symbolize the elite of our military special operations units and agencies since the forming of the OSS. In that spirit, we worked with Kim to create a fighter/dagger that could be used while conducting missions on the modern battle field.
The blade allows for deep penetration, all while allowing the user to index the blade by touch and feel. The ergonomic and textured micarta handle is specifically designed with comfort and confidence in of grip.
Note: Double edge may be ordered with an unsharpened on top edge to comply with some state and/or local laws, please insure you follow the laws of your state and locality when ordering this knife.

 
Specifications:
Knife Name:  Spartan-Breed Fighter-Dagger
Designer:  Kim Breed
Overall Length:  11"
Blade Length:  5.5"
Blade Thickness:  3/16"
Blade Steel:  CPM S35VN
Blade Hardness:  58-60 HRC
Blade Style:  Full Tang Dagger— Flat saber grinds with optional unsharpened top edge.
Coating:  SpartaCoat - Black PVD - Tungsten DLC or Flat Dark Earth - ZrN
Handle Material:  3D Contoured CE Canvas Micarta® Black or Green
Weight:  8.13 Oz
 
Note:  Please select blade color, double or single edged, sheath type/color and handle color before adding to cart

Destinazione d'uso: Tattico/Collezione

Tipo di produzione: Custom
Produzione Lama: Usa
Lama: In acciaio D2
Trattamento Lama: -
Manicatura: paracord green
Lunghezza lama: 95mm.
Spessore lama: 6.5mm.
Lunghezza totale: 230mm.
Bilanciatura: sul ramo di guardia
Peso: 330g.
Fodero: kydex
Confezione: astuccio in nylon, con chiusura a zip e loghi Medford
Note: Disegnato e costruito da Greg Medford

The Collini Cutlery is official distributor for Italy of the tactical knives / collection made in USA Chris Reeve

Intended use: Fighter / Tactical

Type of production: Artisan
Blade: stainless steel CPM-S35VN 55 / 57HRC
Lama production: USA
Handle: Black Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Length closed: -
Total length: 290mm.
Balancing: set back to 1cm. from the lower guard branch
Weight: 356g.
Closure: -
Clip: -
Sheath: by SpecOps, in cordura
Notes: single-piece knife from 2007 - production ranks

Winner of "American year knife" to Blade Show 2007.

The Pacific, born of the fruitful collaboration between Reeve and HARSEY is the civilian version of the model Green Beret created to celebrate the 50th Anniversary of "the 1st Special Forces Group" department that has operated in Asia and the Pacific; the name of the knife derives the operating environment of the department.

Intended use: Fighter / Utility Light
Type of production: semi-industrial
Blade: full tang CPM-S35VN Steel 55 / 57HRC with GunKote finish
Country of production: Idaho - USA
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade Thickness: 5.8mm.
Overall length: 315mm.
Balance: on the lower part of the guard
Weight: 336g.
Sheath: Nylon, made in USA, with leg attacks and Type M.O.L.L.E.
Notes: Certificate of guarantee and authenticity

Spartan Blades - HARSEY Model II - Green Canvas Micarta - Knife

Intended use: Tactical / Military

Production Type: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Lama: Black SpartaCoat
Handle: Canvas Micarta with 3D machining
Blade length: 155mm.
Blade thickness: 4.8mm.
Length closed: -
Overall length: 292mm.
Thick when closed: -
Balancing: -
Weight: 327g.
Closing: -
Clip: -
Sheath: Nylon, with attacks SPRINGS
Packaging: -
Notes: Design by William HARSEY Jr.

Takeshi Saji - Mikatsuki Green 270 - Knife ArtigianaleTakeshi Saji - Mikatsuki Green 270 - Craft Knife

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Paracord
Blade length: 285mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 420mm.
Thick when closed: -
Balancing: -
Weight: 490g.
Closure: -
Clip: -
Sheath: Wood painted
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Purpose of use: Collection / Sportsman / Machete

Type of production: craftsmanship
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Paracord
Blade length: 320mm.
Blade thickness: 5mm.
Closed length: -
Total length: 460mm.
Closure thickness: -
Balance: -
Weight: 650g.
Closure: -
Clip: -
Sheath: Painted wood
Packing: Carton box
Notes: Hand made entirely by Takeshi Saji

Intended use: Collection / Allround / Fighter

Type of production: handmade
Blade: Stainless CPM-S35VN 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 180mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 315mm.
Balance: on the branch of lower guard
Weight: 364g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty