custom knives
-
Wander Tactical - Barracuda knife - Ice Brush & Black Micarta - custom knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 98mm.
Blade thickness: 5mm.
Total length: 205mm.
Balancing: set back
Weight: 187g.
Sheath: in Kydex, thermoformed, with tek-lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-BARR-B-IB -
Wander Tactical - Raptor Raw Finish knife - Green Paracord - craft knife
Use: Neck Knife / Collection
Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes compared to the product photographedWT-RRA-GR -
Wander Tactical - Barracuda knife - Raw & Black Micarta - custom knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Balancing: set back
Weight: 204g.
Sheath: in Kydex, thermoformed, with tek-lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-BARR-B -
Wander Tactical - Tryceratops XL El Carnicero knife Raw & Brown Micarta - handmade knife
Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59 / 60HRC
Blade finish: Raw
Handle: Micarta
Blade length: 155mm.
Blade thickness: 5.5mm.
Total length: 255mm.
Balancing: advanced
Weight: 475g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-TRYXL-B -
Wander Tactical - Lynx Knife - Ice Brush Black Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Ice Brush Tiger
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 238mm.
Balancing: set back
Weight: 264g.
Sheath: in ckydex
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differencesWT-LY-BF-1 -
Wander Tactical - Scrambler knife DT - Raw Finish & Green Micarta - craft knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balancing: set back
Weight: 215g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings or usable as a neck knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-SCR-DT-G -
Wander Tactical - Lynx DT Knife - Raw & Black Micarta - Custom Knife
Intended use: Utility / Collection
Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 238mm.
Balancing: set back
Weight: 293g.
Sheath: in Kydex
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-LY-DT-B -
Wander Tactical - Franken Folder - Raw & Burnt Green Micarta - PRIVATE COLLECTION - custom knife
Knife from private collection - Knife in mint condition, brand new - Checked and certified by our in-house laboratory.
Intended Use: Collection / Heavy Duty
Type of production: Handcrafted
Country of manufacture: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 24mm.
Weight: 167g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: -
Notes: Limited Edition handcrafted by Dino Picco of Wander TacticalWT-FF-RB-CP -
Randall Knives - Model 11 Alaskan Skinner Stag Horn - PRIVATE COLLECTION - knife
Knife withdrawn from private collection presumably dating back to the first half of the 1980s - overall in good condition - knife still has factory sharpening, but now ineffective - has a couple of small scratches on the blade and a few small marks on the guard - comes with Randall handcrafted leather sheath in excellent condition - Checked and certified by our in-house lab.
Randall's Model 11 was designed in 1952 by Tommy Thompson, noted Alaskan guide. An otima blade for skinning big game, it features a serrated top of the blade to facilitate thumb placement and prevent thumb slippage.
Intended use: hunting/collectingType of production: handcrafted
Country of manufacture: USA
Blade: O-1 carbon steel
Blade finish: satin-finished
Handle: deer antler, with brass guard
Blade length: 855mm.
Blade thickness: 4mm.
Total length: 195mm.
Balance: set back, at 2cm.
Weight: 165g.
Sheath: Leather
Notes: knife withdrawn from private collection, overall in good conditionRK-11ASH-CP -
Wander Tactical - Smilodon - Copper Brush & White G-10 - PRIVATE COLLECTION - handcrafted knife
Knife withdrawn from private collection - Overall in excellent condition, still with factory sharpening, a few small signs of oxidation - Distinguished by Copper Brush finish, not usual to find on Wander models and very rare ivory white G-10 handle - Checked and certified by our in-house laboratory.
Type of Production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Copper Brush
Handle: G-10
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balance: backward
Weight: 605g.
Sheath: made of Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: supplied with certificate of authenticity and warranty dated 12/20/2020 - knife withdrawn from private collection, overall in excellent conditionAP-SMIL-CBWG10 -
Wander Tactical - Prototype - PRIVATE COLLECTION - SanMai V-Toku2 & Desert Paracord - custom knife
Absolutely like new - Comes from a private collection - Unique item made in 2020, prototype, does not correspond to any standard model of Wander Tactical production - Made entirely by hand.
Use: Collection / Utility / Hunting
Production type: Handcrafted
Country of Production: Italy
Blade: integral, japanese rolled steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade finish: satin finish
Handle: Paracord
Blade length: 90mm.
Blade thickness: 6.65mm.
Total length: 200mm.
Balance: backward
Weight: 180g.
Sheath: in kydex
Package: Certificate of authenticity
Notes: Unique piece of 2020 - Prototype: it doesn't correspond to any standard model of Wander Tactical production - Entirely hand made - Absolutely like new, coming from a private collection,Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Coltelleria Collini, we decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance. At the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.
As in the ancient swords of the Japanese Samurai.
The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals taken individually:
- Longer cutting edge life
thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For further information: collinisteel
WT-PRO-VT -
Takeshi Saji - Koinobori knife - red carp skin - PRIVATE COLLECTION - Craft Knife
Knife collected from a private collection in like new condition with original box - Knife made in 2017 by the famous Japanese knifemaker Takeshi Saji - The knife is supplied together with the sheath made by Saji, with an additional sheath made by the Italian cutler Simone Tonolli. This second sheath allows horizontal attachment to the belt. Checked and certified by our internal laboratory.
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.
Intended use: Collection / Sports
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, Yoshoku laminated damask with Hitachi Aogami cutting edge at 64HRC
Blade treatment: -
Handle: Koinobori (carp) and Tou-Maki (rattan)
Blade length: 100mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 207mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Closure: -
Clip: -
Sheath: two leather sheaths, one produced by Takeshi Saji for vertical positioning and one made by the Italian knifemaker Simone Tonolli for horizontal fixing
Packaging: Cardboard box
Notes: entirely handmade by Takeshi SajiAP-TS-KOIR -
Wander Tactical - Haast Eagle 2.0 - Marble & Black Micarta - custom knife
Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Marble
Handle: Micarta
Blade length: 152mm.
Blade thickness: 5mm.
Total length: 297mm.
Balance: Advanced
Weight: 409g.
Sheath: Kydex, thermoformed, with M.O.L.L.E. compatible belt loop.
Package: unpacked, supplied with its own certificate of authenticity
Notes: Each knife is unique and handcraftedWT-HE2-MABM -
Wander Tactical - Haast Eagle 2.0 - Black Blood & Black Micarta - custom knife
Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Black Blood
Handle: Micarta
Blade Length: 152mm.
Blade thickness: 5mm.
Total length: 297mm.
Balance: Advanced
Weight: 409g.
Sheath: Kydex, thermoformed, with M.O.L.L.E. compatible belt loop.
Package: unpacked, supplied with its own certificate of authenticity
Notes:Each knife is unique and handcraftedWT-HE2-BBBM -
Wander Tactical - Uro Tactical - Marble & Black Micarta - custom knife
Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Marble Gun Coated
Handle: Micarta
Blade Length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balance: Advanced
Weight: 466g.
Sheath: Kydex, thermoformed, with M.O.L.L.E. compatible belt loop.
Package: unpacked, supplied with its own certificate of authenticity
Notes: Each knife is unique and handcraftedWT-UROT-MBM -
Wander Tactical - Scrambler knife - Raw Finish & Green Micarta - 6mm - custom knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 6mm.
Total length: 200mm.
Balancing: set back
Weight: 223g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings (not supplied) or usable as a neck knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-SCR-GM -
Wander Tactical - Scrambler knife - Raw Finish & Black Micarta - craft knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 82mm.
Blade thickness: 5mm.
Total length: 200mm.
Balancing: set back
Weight: 205g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings (not supplied) or usable as a neck knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-SCR-BM -
Randall Knives - Model Triathlete skeleton Boot knife - PRIVATE COLLECTION - collection knife
Knife withdrawn from a private collection. Condition like new, production dating back to between 1996 and 2005, supplied with Randall artisan leather sheath. Checked and certified by our internal laboratory.
Intended use: hunting / collection
Type of production: artisanal
Production Lama: america
Blade: 440A stainless steel
Blade treatment: -
Handle: -
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 165mm.
Balance: set back, at 2cm.
Weight: 89g.
Closure: -
Clip: -
Sheath: Leather
Note:Each Randall model has been thoroughly tested in the field and has been shown to be properly modeled and designed for its particular use. Randall knives are 100% handmade and no two are exactly alike. The demand is so great for all models that it typically takes a few years to get the model ordered directly from Randall.
"Bo" Randall passed away on December 25, 1989 at his home. Bo and his son Gary have run the business side by side for over twenty five years. Gary continues the tradition of handcrafted knives that carry the Randall Made brand along with his children, Jason and Michael.
AP-TRI-SK-RK -
Wander Tactical - Smilodon knife Raw Finish - Brown Wood - PRIVATE COLLECTION - handmade knife
Knife withdrawn from a private collection in excellent condition, re-sharpened - Complete with original certificate - Checked and certified by our in-house Coltelleria Collini laboratory.
Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Row Finish
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Note:AP-SMIL-BW -
Wander Tactical - Uro knife - Dual Tone & Brown Micarta - custom knife
Custom knife from 2021 from a private collection, in like new condition, complete with scabbard and certificate.
Checked, certified in our internal laboratory.Type of production: Handicraft
Blade production: Italy
Blade: D2 steel 59/60HRC
Blade Treatment: Dual Tone
Handle: Micarta
Blade length: 150mm.
Blade thickness: 6.5mm.
Total length: 300mm.
Balance: Advanced
Weight: 448g.
Scabbard: Brown leather
Packaging: -
Notes: Each knife is unique and handcraftedWT-URO-DT-D -
Wander Tactical - Menoceras - D2 steel - Iron Wash & Coyote Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: -
Handle: Micarta
Blade length: 65mm.
Blade thickness: 3,5mm.
Total length: 162mm.
Balancing: set back
Weight: 149g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-MEN-CM -
Wander Tactical - Menoceras - D2 steel - Iron Wash & Green Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: -
Handle: Micarta
Blade length: 65mm.
Blade thickness: 3,5mm.
Total length: 162mm.
Balancing: set back
Weight: 149g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-MEN-GM -
Wander Tactical - Menoceras - D2 steel - Iron Wash & Black Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: -
Handle: Micarta
Blade length: 65mm.
Blade thickness: 3,5mm.
Total length: 162mm.
Balancing: set back
Weight: 149g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-MEN-BM -
Takeshi Saji - Mikaduki knife 180 Green - Brown sheath - handmade knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.
Intended use: Collection / Sports / Machete
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damask with 64HRC Hitachi Shirogami cutting edge
Blade treatment: -
Handle: Paracord Green
Blade length: 205mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 335mm.
Thick when closed: -
Balancing: -
Weight: 358g.
Closure: -
Clip: -
Sheath: ** LEATHER **
Packaging: Cardboard box
Notes: entirely handmade by Takeshi SajiTS-MB180GM -
Wander Tactical - Lynx - Raw & Brown Micarta - custom knife
Intended Use: utility / bushcraft
Type of Production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade Length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 260g.
Sheath: kydex
Package: -
Notes: Each knife is unique and handcraftedWT-LY-RBM -
Randall Knives - Model 11 Alaskan Skinner Fixed Blade knife - PRIVATE COLLECTION
Knife withdrawn from a private collection. Condition like new, production dating back to 2005 supplied with Randall artisan leather sheath. Checked and certified by our internal laboratory.
Randall's Model 11 features a serrated top blade for thumb placement. From a leather handle of about 11 cm equipped with a duralumin bottom. The drop-point blade was designed in 1952 by Tommy Thompson, a well-known Alaska guide. Excellent blade for skinning large game.
Intended use: hunting / collectionType of production: artisanal
Production Lama: america
Blade: stainless steel
Blade treatment: -
Handle: leather and brass discs
Blade length: 105mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 225mm.
Balance: set back, at 2cm.
Weight: 163g.
Closure: -
Clip: -
Sheath: Leather
Note:AP-M11-L -
Medford Knife and Tools - Praetorian Tanto - S35VN - Flamed Blue Titanium - knife
Intended Use: Tactical/Collection
Production type: Custom
Country of Production: Usa
Blade: Stainless steel CPM S35 VN
Blade finish: Tumbled
Handle: Blue anodized titanium, flamed
Blade Length: 95mm.
Blade thickness: 5mm.
Total length: 227mm.
Thickness when closed: 13mm.
Weight: 245g.
Locking mechanism: Frame Lock
Clip: Titanium, flamed
Package: Tactical polymer case, with Medford logos
Notes: Designed and built by Greg MedfordME-PRE-T-FBT -
Wander Tactical - Uro Saw - Raw and Green Micarta - handmade knife
Intended Use: Utility / Collection
Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balance: Advanced
Weight: 450g.
Sheath: thermoformed kydex, with double belt loop, M.O.L.L.E. compatible.
Package: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by handWT-UR-S-RGM -
Wander Tactical - Uro Saw - Marble and Brown Micarta - handmade knife
Intended Use: Utility / Collection
Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Marble
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balance: Advanced
Weight: 450g.
Sheath: thermoformed kydex, with double belt loop, M.O.L.L.E. compatible.
Package: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by handWT-UR-S-MBM -
Wander Tactical - Lynx - Black Blood and Black Micarta - handmade knife
Intended Use: Utility / Collection
Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Black Blood
Handle: Micarta
Blade Length: 105mm.
Blade thickness: 5mm.
Total lenght: 235mm.
Balance: backward
Weight: 271g.
Sheath: thermoformed kydex, with M.O.L.L.E. compatible belt loop.
Package: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by handWT-LY-BBM -
Wander Tactical - Smilodon - Marble and Green Micarta - handmade knife
Production type: Heavy duty hiking / Collection
Production type: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Marble
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balance: set back from the guard branch
Weight: 644g.
Scabbard: Kydex, thermoformed
Packaging: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by handWT-SM-MBGM -
Allen Elishewitz - Gordian Knot Custom Flipper - Bronze and Carbon Fiber - PRIVATE COLLECTION - handmade knife
Knife collected from private collection - 2014 model entirely handmade by Allen Elishewitz - Like new, original sharpening - Supplied with nylon pouch with velcro - Checked and certified by our internal laboratory Coltelleria Collini.
Intended use: CollectionKind of production: Handmade
Country of production: USA
Blade: handcrafted and beveled, in CTS-C75P stainless steel (Latrobe BG-42)
Blade treatment: handmade satin finish with Allen Elishewitz golden punch
Handle: titanium liners "crushed ice" with carbon fiber and copper grips with handmade bronze bolsters
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total lenght: 223mm.
Thickness when closed: 16mm.
Weight: 199g.
Closure: Liner Lock
Clip: Removable, inegral carbon fiber
Notes: Entirely handcrafted by Allen Elishewitz - 2014 model, like new - from private collector - Supplied with nylon velcro pouch.AE-GKCF -
Wander Tactical - Centuria knife - Serial VIII - Prototype Limited Edition - Custom knife
Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely hand-made limited series of prototypes, in just 10 specimens, all different from each other, of the new Centuria fixed blade model that smoothly blends the typical design together. of ancient Roman daggers with iconic American World War II combat knives.
Intended use: CollectionType of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balancing: advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: This knife is part of an exclusive lot of handcrafted prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, processes, bevels and grindings that make the 10 pieces all completely different from each other.WT-CE-PR-VIII -
Wander Tactical - Centuria - Serial VII - Prototype Limited Edition - Custom Knife
Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely handmade limited edition of prototypes, in only 10 pieces all different from each other, of the new fixed blade model Centuria that smoothly blends together the typical design of the ancient Roman daggers with the iconic American combat knives of World War II.
Intended Use: CollectionType of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: Advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.WT-CE-PR-VII -
Wander Tactical - Centuria - Serial IX - Prototype Limited Edition - Custom Knife
Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely handmade limited edition of only 10 different prototypes of the new Centuria fixed blade model that smoothly blends together the typical design of ancient Roman daggers with the iconic American combat knives of World War II.
Intended Use: CollectionType of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: Advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.WT-CE-PR-IX -
Wander Tactical - Lynx Bushman knife - Dual Tone - Brown Micarta - custom knife
Destinazione d'uso: Utility / Collezione
Tipo di produzione: Artigianale
Paese di produzione: Italia
Lama: in acciaio D2 a 59/60HRC
Trattamento lama: Raw
Manicatura: Micarta
Lunghezza lama: 105mm.
Spessore lama: 6mm.
Lunghezza totale: 235mm.
Bilanciatura: arretrata
Peso: 319g.
Fodero: in cuoio marrone
Confezione: privo di imballo - fornito con certificato di originalità e garanzia Wander Tactical
Note: Ogni coltello è unico e realizzato artigianalmente; possono esserci leggere differenze di finiture, colori e materiali rispetto al prodotto fotografato.WT-LY-BUBR -
Wander Tactical - Centuria - Serial X - Prototype Limited Edition - custom knife
Dino Picco, knife maker and lead designer of Wander Tactical, has created a limited edition of only 10 different prototypes of the new fixed blade model Centuria, which smoothly blends together the typical design of ancient Roman daggers with the iconic American combat knives of World War II.
Intended Use: CollectionType of production: Custom
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: Advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.WT-CE-PR-X -
Wander Tactical - Franken Folder - Raw & Burnt Green Micarta - Limited Edition - handmade knife
Intended Use: Collection / Heavy Duty
Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folder with micarta handle
Blade length: 95mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total lenght: 214mm.
Thickness when closed: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade.
Closure: Rockers Arm 8.11
Clip: titanium stone washed, removable and reversible
Package: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely hand made, each piece is different from the previous one for aesthetic finishing.WT-FF-RB -
Wander Tactical - Franken Folder - Mozzetta Blade - Limited Edition - handmade knife
Intended Use: Collection / Heavy Duty
Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folder with micarta handle
Blade length: 95mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total lenght: 214mm.
Thickness when closed: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade.
Closure: Rockers Arm 8.11
Clip: titanium stone washed, removable and reversible
Package: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely hand made, each piece is different from the previous one for aesthetic finishing.WT-FF-MO -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
Wander Tactical - Special Commando knife - Brown Micarta - custom knife
special knife made by Wander Tactical in April 2021
Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique pieceWT-SC-BBM -
Wander Tactical - Special Commando knife - Brown Micarta - custom knife
special knife made by Wander Tactical in April 2021
Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique pieceWT-USC-BM -
Wander Tactical - Special Commando knife - Brown Micarta - custom knife
special knife made by Wander Tactical in April 2021
Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique pieceWT-SC-BM -
Medford Knife and Tools - Micro Praetorian T knife - Blue Titanium - knife
Intended use: Tactical / EDC
Type of production: semi artisanal
Country of production: USA
Blade: CPM-S35V steel
Blade treatment: Black PVD
Handle: anodized titanium with a thickness of 3.5mm per folder
Blade length: 75mm.
Blade thickness: 4.5mm.
Closed length: 97mm.
Total length: 170mm.
Thick when closed: 12.5mm.
Balancing: backward
Weight: 142g.
Opening: Ambidextrous thumbstood on the blade
Washers: in brass
Closure: Framelock
Clip: in titanium, removable
Packaging: tactical case in polymer with Medford logos
Notes: Skull Crasher on Shank - Designed and built by Greg MedfordMD08SPD37A2 -
Wander Tactical - Drago The Beast knife - Raw Finish & Green Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 2430mm.
Blade thickness: 6.5mm.
Total length: 400mm.
Balancing: backward
Weight: 712g.
Sheath: in thermoformed kydex and leather
Packaging: -
Notes: exclusive model produced in just two pieces and handcraftedWT-DR-RM -
Wander Tactical - Smilodon knife - Moon Effect & Black Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade Finish: Moon Effect
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balancing: backward
Weight: 644g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: unique and handcrafted knifeWT-SM-ME-B -
Wander Tactical - Godfather knife - Raw Finish & Green Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 240mm.
Blade thickness: 6.5mm.
Total length: 400mm.
Balancing: backward
Weight: 702g.
Sheath: thermoformed kydex
Packaging: -
Notes: unique and handcrafted knifeWT-GF-RF-GM -
Wander Tactical - Godfather knife - Moon Effect & Black Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Moon Effect
Handle: Micarta
Blade length: 240mm.
Blade thickness: 6.5mm.
Total length: 400mm.
Balancing: backward
Weight: 715g.
Sheath: thermoformed kydex
Packaging: -
Notes: unique and handcrafted knifeWT-GF-MEGB -
E.G. Custom - Hunting knife - horn and briar handle - entirely handmade
handcrafted knife entirely handmade with grinding wheel and file. The blade is made of ledeburitic steel with 2.3% carbon obtained by powder metallurgy and reaches a hardness of 64 HRC. Perfect for hunting and outdoor use.
Intended use: collection / hunting
Type of production: custom
Production Lama: USA
Blade: 64HRC powder steel
Blade treatment: -
Handle: in deer horn and tuya burl with brass guard
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 172g.
Sheath: in brown leather sewn and handmade
Notes: knife made in Italy in the late 90s - certificate of the craftsmanCUS-1€0.00Only -20 leftOut of stock -
Wander Tactical - Tryceratops - Raw & Brown Micarta - custom knife
Type of production: Handmade
Blade Production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Raw GunKote
Handle: Micarta
Blade Length: 70mm.
Blade thickness: 6.5mm.
Total length: 132mm.
Balance: backward
Weight: 190g.
Scabbard: in thermoformed Kydex
Package: unpacked, accompanied by certificate of authenticity with technical specifications
Notes: Each knife is unique and handcrafted, there may be slight differences in finishes, colors and materials compared to the product photographed.WT-TR-RBM -
Wander Tactical - Lynx Bushmann - Raw & Black Micarta - custom knife
Intended Use: Utility / Collection
Production type: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 105mm.
Blade thickness: 6mm.
Total length: 235mm.
Balance: backward
Weight: 319g.
Sheath: brown leather
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-LY-BUSB -
Wander Tactical - Uro Knife - Marble and Black Micarta - craft knife
Type of production: Artisan
Blade Production: Italy
Blade: Steel D2 at 59/60HRC
Blade Finishing: Marble
Handle: Micarta
Blade Length: 147mm.
Blade thickness: 6mm.
Total length: 300mm.
Balance: Advanced
Weight: 446g.
Sheath: Kydex, thermoformed
Package: -
Notes: Each knife is unique and handcraftedWT-UR-MBM -
Wander Tactical - Smilodon knife - Marble and Brown Micarta - handcrafted knife
Production Type: Handicraft
Blade Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finishing: Marble
Handle: Micarta
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balance: backward
Weight: 644g.
Sheath: Kydex, thermoformed
Package: -
Notes: Each knife is unique and handcrafted, there may be slight differences in finishes, colors and materials compared to the product photographed.WT-SM-MBM -
Wander Tactical - Tryceratops XL El Carnicero - Raw Black Blood & Black Micarta - handmade knife
Type of production: Custom
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Black Blood & Raw
Handle: Micarta
Blade Length: 155mm.
Blade thickness: 5.5mm.
Total length: 255mm.
Balance: Advanced
Weight: 475g.
Sheath: Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted, there may be slight differences in finishes, colors and materials compared to the product photographed.WT-TXL-RBBB -
Wander Tactical - Pterodactyl Hawk - Black Blood & Green Paracord - custom ax
Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Black Blood
Handle: Green Paracord
Head Size: 90mm (cutting edge) x 208mm
Thickness: 6.5mm.
Total length: 370mm.
Balancing: advanced
Weight: 943g. (1.080g. With scabbard)
Sheath: in Kydex, thermoformed
Packaging: -
Note:WT-PH-GP -
Wander Tactical - Dagger Tool - Limited Edition - craft knife
Use: Tactics / collection
Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: gun cote heart
Handle: black micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 240mm.
Balancing: set back
Weight: 200g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: WT Limited Exclusive Project - Single Edge - Wander Tactical CertifiedWT-DA-MI -
Wander Tactical - Lynx - Marble & Brown Micarta - custom knife
Intended Use: Utility / Collection
Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Marble
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total lenght: 235mm.
Balance: backward
Weight: 289g.
Sheath: Kydex
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: Each knife is unique and handcrafted, there may be slight differences in finishes, colors and materials compared to the product photographed.WT-LY-MABR -
Wander Tactical - Raptor knife - SanMai V-Toku2 & Green Paracord - kydex brown - custom knife
Japanese steel blends with Italian excellence
For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.
RAPTOR model:
Use: Tactical / Utility
Type of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: set back
Weight: 149g.
Sheath: in brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-RAP-VT-B -
Wander Tactical - Tryceratops XL El Carnicero knife - Icebrush & Black Micarta - craft knife
Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade Finish: Icebrush
Handle: Micarta
Blade length: 155mm.
Blade thickness: 5.5mm.
Total length: 255mm.
Balancing: advanced
Weight: 442g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-TRY-XL-B -
Wander Tactical - Prototype X-020 knife - Green paracord - custom knife
special prototype made by Wander Tactical in October 2020
Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: -
Handle: Green paracord
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 260mm.
Balancing: on the branch of gurdia
Weight: 201g.
Sheath: in kydex
Packaging: -
Notes: unique pieceWT-X020 -
Wander Tactical - Godfather knife - Marble & Black Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Marble
Handle: Micarta
Blade length: 240mm.
Blade thickness: 6.5mm.
Total length: 400mm.
Balancing: set back
Weight: 715g.
Sheath: in kydex
Packaging: -
Notes: GodFather modelWT-GF-M -
Wander Tactical - Uro - Ice Brush Tiger knife and Green Micarta - craft knife
Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Ice Brush Tiger
Handle: Micarta
Blade length: 147mm.
Blade thickness: 6mm.
Total length: 300mm.
Balancing: advanced
Weight: 446g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: Each knife is unique and handcraftedWT-URO-G -
Wander Tactical - Tryceratops XL El Carnicero - Raw & Brown Micarta - custom knife
Intended use: Hard Utility / Collection
Type of production: Handmade
Country of production: Italy
Blade: 59 / 60HRC D2 steel
Blade finish: Raw
Handle: Micarta
Blade length: 155mm.
Blade thickness: 5.5mm.
Total length: 255mm.
Balancing: advanced
Weight: 475g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-TXL-RB -
Wander Tactical - Smilodon Iron Washed and Green Micarta - craft knife
Thought to be the ultimate survival tool, the Smilodon is remarkably well balanced and offers incredible cutting power on the timber thanks to its bevelled double-concave. In urban areas it can be used as breaching tool, but having regard to its ergonomics can also be employed to use less demanding and complex.
Type of production: Artisan
Production Lama: Italy
Blade: 59 / 60HRC D2 steel
Blade treatment: GunKote Ice Brush
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balancing: set back
Weight: 644g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-SMI-GM -
Wander Tactical - Tryceratops knife Clip Point - SanMai V-Toku2 & Black Micarta - custom knife
Japanese steel blends with Italian excellence
For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.
Tryceratops model .:
Use: Tactical / Utility
Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade finish: satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 130mm.
Balancing: set back
Weight: 188g.
Sheath: in kydex black
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-TRY-C-VT -
Wander Tactical - Primitive Dagger Tool - Limited Edition - custom knife
Use: Tactics / collection
Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: dual tone
Handle: black micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 240mm.
Balancing: set back
Weight: 200g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: WT exclusive project limited to 5 pieces - single edge - Wander Tactical certifiedWT-DAG-P -
Wander Tactical - Raptor knife - SanMai V-Toku2 & Green Paracord - custom knife
Japanese steel blends with Italian excellence
For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.
RAPTOR model:
Use: Tactical / Utility
Type of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: set back
Weight: 149g.
Sheath: in green kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-RAP-VT -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Black Micarta - custom knife
In collaboration with Wander Tactical we have decided to propose the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.
This time, in the rich catalog of products they offer, we have chosen a particular steel with a carbonaceous edge, but with external stainless steel cheeks. Specifically we used, for the central plate, the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for the external lamination in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening and maintenance; at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the laminated structure.
Use: EDC / Light Utility / All RoundType of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade treatment: Satin
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Total length: 200mm.
Balancing: set back
Weight: 229g.
Sheath: in Kydex, thermoformed, with belt loop
Packaging: certificate of authenticity
Notes: unique and exclusive pieceAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-SC-VT -
Wander Tactical - Godfather knife Tiger - Icebrush & Black Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: 59 / 60HRC D2 steel
Blade treatment: Black Blood
Handle: Micarta
Blade length: 225mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: set back
Weight: 686g.
Sheath: in leather
Packaging: -
Notes: GodFather model with bowieWT-GF-T-CP -
Wander Tactical - Lynx knife Iron Washed & Micarta Desert - custom knife
Intended use: Utility / Collection
Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Iron Washed
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balancing: set back
Weight: 289g.
Sheath: in leather
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-LYNX-BB -
Deroma - Pattada knife craft knife in ram's horn - 27cm - craft knife
Intended use: Regional
Type of production: Artisan
Lama production: Italy
Blade: 12c26 stainless steel
Blade treatment: -
Handle: ram horn
Blade length: 110mm.
Blade thickness: 3mm.
Length closed: 150mm.
Total length: 270mm.
Thick when closed: 19mm
Balancing: -
Weight: 105g.
Closing: without blade lock
Clip: -
Sheath: -
Packaging: rigid packaging with artisan production certificate signed by Antonio Deroma
Note: -DR-RES-27 -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Desert Micarta - coltello custom
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
SCRAMBLER Model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: backward
Weight: 212g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-SC-VT-D