custom knives

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: in mint condition - year of manufacture 1997
* Sharpening: Factory
* Marks on blade: None
* Signs on handle: None
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: without certificate
* Checked and Certified by our internal laboratory

Intended use: Collection
Type of production: Handcrafted unique piece by Francesco Pachì with Scrimshaw (wolf's head) by Mirella Pachì
Blade production: Italy
Blade: ATS-34 stainless steel
Handle: in desert ironwood with insert in mammoth fossil ivory with handcrafted scrimshaw depicting a wolf's head
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 235mm.
Weight: 215g.
Sheath: in handmade leather
Packaging: Pachì cordura pocket
Note:

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production single piece produced in 2019
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: -
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: full-tang stainless steel RWL-34 60 / 61HRC
Blade treatment: -
Handle: holographic resin handle with titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 132g.
Closure: Liner Lock
Clip: -
Sheath: -
Packaging:
Notes: Handmade by Master Sergio Consoli - knife number 480 made in 2019

Intended Use: Collection / Heavy Duty

Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Black Blood
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade.
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: plastic pouch with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each example differs from the previous one in aesthetic finishes

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Discontinued, model dating back to 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: WT original packaging
* Sheath: -
* Manuals, Certificates and Warranties: WT certificate
* Checked and certified by our internal laboratory

Intended use: Collection / Heavy Duty

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Closed length: 124mm.
Total length: 214mm.
Thick when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade
Closing: Rockers Arm 8.11
Clip: in stone washed titanium, removable and reversible
Packaging: Plastic case with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each piece differs from the previous one in aesthetic finishes

Intended use: hiking / bushcraft

Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Stone Edge
Handle: Micarta
Blade Length: 70mm.
Blade thickness: 3.5mm.
Total length: 162mm.
Balance: backward
Weight: 149g.
Sheath: made of Kydex, thermoformed
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcrafted

Intended use: hiking / bushcraft

Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Black Blood
Handle: Micarta
Blade Length: 70mm.
Blade thickness: 3.5mm.
Total length: 162mm.
Balance: backward
Weight: 149g.
Sheath: made of Kydex, thermoformed
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcrafted

Intended Use: Excursionism / Heavy Duty

Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Row Finish
Handle: Micarta
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balance: backward
Weight: 605g.
Sheath: Kydex
Packaging: warranty certificate
Notes: Each knife is unique and handcrafted in every part

Interesting handcrafted lockable "One of a Kind" made in 2008 by established Danish knife maker Mikkel Willumsen

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Overall in very good condition
* Commercially available Unique specimen made in 2008.
* Sharpening: Original, with a few small marks from use.
* Marks on blade: A couple of small marks.
* Marks on handle: A couple of small abrasions on titanium folder.
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory



Intended Use: Collection 

Production type: custom
Country of production: Denmark
Blade: handcrafted and beveled, stainless steel RWL-34
Blade treatment: dual tone: stone washed and handcrafted satin finish
Handle: micropallinated titanium and carbon fiber
Blade length: 107mm.
Blade thickness: 4mm.
Length closed: 137mm.
Total length: 245mm.
Thickness when closed: 15mm.
Weight: 215g.
Closure: Framelock
Clip: Removable, anodized titanium
Notes: Made entirely by hand by Mikkel Willumsen - Ball bearing opening

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balancing: backward
Weight: 201g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings or usable as a neck knife
Packaging: -
Notes: unique knife with Clip point tip, handcrafted

Knife withdrawn from a private collection - Limited edition production in Japanese CoS steel in SanMai dating back to 2018 and no longer available - In like new condition, no marks on the blade (never cut, never resharpened) or on the handle. Supplied with handmade Kydex sheath and Wander Tactical certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

In collaboration with Wander Tactical we have decided to propose their new neck knife, the Raptor model, in an exclusive version with a satin blade that uses the famous Japanese San Mai steel produced by Takefu Steel. Specifically we used, for the central plate, the CoS at 61.5HRC (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated stainless steel (San Mai) with cutting edge in CoS at 61.5HRC with cryogenic hardening
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: in Kydex, thermoformed, with lanyard for Neck Knife use
Packaging: -
Notes: Each knife is unique and handcrafted

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Medieval Finish
Handle: Micarta
Blade length: 243mm.
Blade thickness: 6mm.
Total length: 405mm.
Balancing: backward
Weight: 690g.
Sheath: thermoformed kydex
Packaging: -
Notes: unique and handcrafted knife

Production Type: Artisan
Blade Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw Finish
Handle: Micarta
Blade Length: 243mm.
Blade thickness: 6mm.
Total length: 400mm.
Balance: backward
Weight: 662g.
Sheath: made of thermoformed kydex
Packaging: -
Notes: unique and handcrafted knife

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Camo
Handle: Micarta
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 347mm.
Balancing: backward
Weight: 510g.
Sheath: in Kydex, thermoformed, with tek-lok type attachment
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: Dimorphodon with clip point tip and Rambo knife style blade - Limited Edition - Each knife is unique and handcrafted

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Black Blood dual tone
Handle: Micarta
Blade length: 198mm.
Blade thickness: 5mm.
Total length: 345mm.
Balancing: backward
Weight: 436g.
Sheath: in brown leather
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: Dimorphodon with clip point tip and Rambo knife style blade - Limited Edition - Each knife is unique and handcrafted

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Bronze Lava Field
Handle: Micarta
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 347mm.
Balancing: backward
Weight: 500g.
Sheath: in brown leather
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: First example blade treatment - Prototypo - Each knife is unique and handcrafted

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade finish: Marble Gun Coated
Handle: Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 236mm.
Balancing: advanced
Weight: 293g.
Sheath: in Kydex, thermoformed, with belt loop compatible with M.O.L.L.E.
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: Each knife is unique and handcrafted

Handcrafted knife collected from private collection - In like new condition - never used, with factory sharpening, accompanied by craftsman's certificate and velvet fabric case - checked and certified by our in-house laboratory

Intended Use: Regional Italian / Collection

Type of production: Artisan
Country of Production: City of Pattada, Sardinia, Italy
Blade: 420 stainless steel
Blade finish: satin-finished
Handle: Sardinian mouflon horn and alpaca
Blade length: 105mm.
Blade thickness: 2.5mm.
Length closed: 125mm.
Total length: 230mm.
Thickness when closed: 17mm.
Weight: 74g.
Closing mechanism: -
Clip: -
Sheath: -
Packaging: velvet fabric sheath and certificate handcrafted production signed by Andrea Pizzadili
Notes: knife withdrawn from private collection, mint condition, like new

NOTE - "one of a kind" knife, featuring an entirely handcrafted blade with dual finish: Raw and Satin

Intended Use: Heavy Duty / Hiking / Tactical / Collection

Type of production: Midtech (handcrafted blade and handle - industrial folders)
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw and Satin
Handle: titanium folders with micarta handle
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Packaging: plastic case with Wander Tactical logos
Notes: "one of a kind" knife

Knife withdrawn from private collection, dating back to the late 1980s, overall in very good condition - Never used, still has factory thread - Checked, certified by our in-house lab.

Intended use: Tactical / Collection

Type of production: handcrafted
Country of manufacture: USA
Blade: O1 carbon steel
Blade finish: satin finish
Handle: micarta and brass
Blade length: 190mm.
Blade thickness: 5.5mm.
Total length: 307mm.
Balance: on the guard branch
Weight: 414g.
Sheath: Leather
Notes: knife withdrawn from private collection dating back to the late 1980s, overall in very good condition

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balancing: set back
Weight: 217g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings or usable as a neck knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Black Blood
Handle: Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 236mm.
Balancing: set back
Weight: 274g.
Sheath: in kydex
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences

Use: Neck Knife / Collection

Type of production: handmade
Country of production: Italy
Blade: full tang, D2 steel
Blade Finish: Raw
Handle: Paracord
Blade length: 80mm.
Blade thickness: 5.5mm.
Total length: 180mm.
Weight: 130g.
Sheath: Thermoformed Kydex
Packaging: -
Notes: -

Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely hand-made limited series of prototypes, in just 10 specimens all different from each other, of the new Centuria fixed blade model that smoothly blends the typical design together. of ancient Roman daggers with iconic American World War II combat knives.

Intended use: Collection

Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balancing: advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: This knife is part of an exclusive batch of handcrafted prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, processes, bevels and grindings that make the 10 pieces all completely different from each other.

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 162mm.
Balancing: set back
Weight: 149g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade finish: Marble
Handle: Micarta
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 295mm.
Balancing: advanced
Weight: 395g.
Sheath: in Kydex, thermoformed, with belt loop compatible with M.O.L.L.E.
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: Each knife is unique and handcrafted

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 98mm.
Blade thickness: 5mm.
Total length: 205mm.
Balancing: set back
Weight: 187g.
Sheath: in Kydex, thermoformed, with tek-lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes compared to the product photographed

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Balancing: set back
Weight: 204g.
Sheath: in Kydex, thermoformed, with tek-lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59 / 60HRC
Blade finish: Raw
Handle: Micarta
Blade length: 155mm.
Blade thickness: 5.5mm.
Total length: 255mm.
Balancing: advanced
Weight: 475g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Ice Brush Tiger
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 238mm.
Balancing: set back
Weight: 264g.
Sheath: in ckydex
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balancing: set back
Weight: 215g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings or usable as a neck knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Intended use: Utility / Collection

Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 238mm.
Balancing: set back
Weight: 293g.
Sheath: in Kydex
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Knife from private collection - Knife in mint condition, brand new - Checked and certified by our in-house laboratory.

Intended Use: Collection / Heavy Duty

Type of production: Handcrafted
Country of manufacture: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 24mm.
Weight: 167g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: -
Notes: Limited Edition handcrafted by Dino Picco of Wander Tactical

Knife withdrawn from private collection presumably dating back to the first half of the 1980s - overall in good condition - knife still has factory sharpening, but now ineffective - has a couple of small scratches on the blade and a few small marks on the guard - comes with Randall handcrafted leather sheath in excellent condition - Checked and certified by our in-house lab. 

Randall's Model 11 was designed in 1952 by Tommy Thompson, noted Alaskan guide. An otima blade for skinning big game, it features a serrated top of the blade to facilitate thumb placement and prevent thumb slippage.

Intended use: hunting/collecting

Type of production: handcrafted
Country of manufacture: USA
Blade: O-1 carbon steel
Blade finish: satin-finished
Handle: deer antler, with brass guard
Blade length: 855mm.
Blade thickness: 4mm.
Total length: 195mm.
Balance: set back, at 2cm.
Weight: 165g.
Sheath: Leather
Notes: knife withdrawn from private collection, overall in good condition

Knife withdrawn from private collection - Overall in excellent condition, still with factory sharpening, a few small signs of oxidation - Distinguished by Copper Brush finish, not usual to find on Wander models and very rare ivory white G-10 handle - Checked and certified by our in-house laboratory.

Type of Production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Copper Brush
Handle: G-10
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balance: backward
Weight: 605g.
Sheath: made of Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: supplied with certificate of authenticity and warranty dated 12/20/2020 - knife withdrawn from private collection, overall in excellent condition

Absolutely like new - Comes from a private collection - Unique item made in 2020, prototype, does not correspond to any standard model of Wander Tactical production - Made entirely by hand.

Use: Collection / Utility / Hunting

Production type: Handcrafted
Country of Production: Italy
Blade: integral, japanese rolled steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade finish: satin finish 
Handle: Paracord
Blade length: 90mm.
Blade thickness: 6.65mm.
Total length: 200mm.
Balance: backward
Weight: 180g.
Sheath: in kydex
Package: Certificate of authenticity
Notes: Unique piece of 2020 - Prototype: it doesn't correspond to any standard model of Wander Tactical production - Entirely hand made - Absolutely like new, coming from a private collection,

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Coltelleria Collini, we decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance. At the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.

As in the ancient swords of the Japanese Samurai.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals taken individually:

- Longer cutting edge life
thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For further information: collinisteel

Knife collected from a private collection in like new condition with original box - Knife made in 2017 by the famous Japanese knifemaker Takeshi Saji - The knife is supplied together with the sheath made by Saji, with an additional sheath made by the Italian cutler Simone Tonolli. This second sheath allows horizontal attachment to the belt. Checked and certified by our internal laboratory.

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.

Intended use: Collection / Sports

Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, Yoshoku laminated damask with Hitachi Aogami cutting edge at 64HRC
Blade treatment: -
Handle: Koinobori (carp) and Tou-Maki (rattan)
Blade length: 100mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 207mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Closure: -
Clip: -
Sheath: two leather sheaths, one produced by Takeshi Saji for vertical positioning and one made by the Italian knifemaker Simone Tonolli for horizontal fixing
Packaging: Cardboard box
Notes: entirely handmade by Takeshi Saji

Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Marble
Handle: Micarta
Blade length: 152mm.
Blade thickness: 5mm.
Total length: 297mm.
Balance: Advanced
Weight: 409g.
Sheath: Kydex, thermoformed, with M.O.L.L.E. compatible belt loop.
Package: unpacked, supplied with its own certificate of authenticity
Notes: Each knife is unique and handcrafted

Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Black Blood
Handle: Micarta
Blade Length: 152mm.
Blade thickness: 5mm.
Total length: 297mm.
Balance: Advanced
Weight: 409g.
Sheath: Kydex, thermoformed, with M.O.L.L.E. compatible belt loop.
Package: unpacked, supplied with its own certificate of authenticity
Notes:Each knife is unique and handcrafted

Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Marble Gun Coated
Handle: Micarta 
Blade Length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balance: Advanced
Weight: 466g.
Sheath: Kydex, thermoformed, with M.O.L.L.E. compatible belt loop.
Package: unpacked, supplied with its own certificate of authenticity
Notes: Each knife is unique and handcrafted

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 6mm.
Total length: 200mm.
Balancing: set back
Weight: 223g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings (not supplied) or usable as a neck knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 82mm.
Blade thickness: 5mm.
Total length: 200mm.
Balancing: set back
Weight: 205g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings (not supplied) or usable as a neck knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Knife withdrawn from a private collection. Condition like new, production dating back to between 1996 and 2005, supplied with Randall artisan leather sheath. Checked and certified by our internal laboratory.

Intended use: hunting / collection

Type of production: artisanal
Production Lama: america
Blade: 440A stainless steel
Blade treatment: -
Handle: -
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 165mm.
Balance: set back, at 2cm.
Weight: 89g.
Closure: -
Clip: -
Sheath: Leather
Note:

Each Randall model has been thoroughly tested in the field and has been shown to be properly modeled and designed for its particular use. Randall knives are 100% handmade and no two are exactly alike. The demand is so great for all models that it typically takes a few years to get the model ordered directly from Randall.

"Bo" Randall passed away on December 25, 1989 at his home. Bo and his son Gary have run the business side by side for over twenty five years. Gary continues the tradition of handcrafted knives that carry the Randall Made brand along with his children, Jason and Michael.

Knife withdrawn from a private collection in excellent condition, re-sharpened - Complete with original certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Row Finish
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Note:

Custom knife from 2021 from a private collection, in like new condition, complete with scabbard and certificate.
Checked, certified in our internal laboratory.

Type of production: Handicraft

Blade production: Italy
Blade: D2 steel 59/60HRC
Blade Treatment: Dual Tone
Handle: Micarta 
Blade length: 150mm.
Blade thickness: 6.5mm.
Total length: 300mm.
Balance: Advanced
Weight: 448g.
Scabbard: Brown leather
Packaging: -
Notes: Each knife is unique and handcrafted

Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: -
Handle: Micarta
Blade length: 65mm.
Blade thickness: 3,5mm.
Total length: 162mm.
Balancing: set back
Weight: 149g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: -
Handle: Micarta
Blade length: 65mm.
Blade thickness: 3,5mm.
Total length: 162mm.
Balancing: set back
Weight: 149g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: -
Handle: Micarta
Blade length: 65mm.
Blade thickness: 3,5mm.
Total length: 162mm.
Balancing: set back
Weight: 149g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.

Intended use: Collection / Sports / Machete

Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damask with 64HRC Hitachi Shirogami cutting edge
Blade treatment: -
Handle: Paracord Green
Blade length: 205mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 335mm.
Thick when closed: -
Balancing: -
Weight: 358g.
Closure: -
Clip: -
Sheath: ** LEATHER **
Packaging: Cardboard box
Notes: entirely handmade by Takeshi Saji

Intended Use: utility / bushcraft

Type of Production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade Length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 260g.
Sheath: kydex
Package: -
Notes: Each knife is unique and handcrafted

Knife withdrawn from a private collection. Condition like new, production dating back to 2005 supplied with Randall artisan leather sheath. Checked and certified by our internal laboratory.

Randall's Model 11 features a serrated top blade for thumb placement. From a leather handle of about 11 cm equipped with a duralumin bottom. The drop-point blade was designed in 1952 by Tommy Thompson, a well-known Alaska guide. Excellent blade for skinning large game.

Intended use: hunting / collection

Type of production: artisanal
Production Lama: america
Blade: stainless steel
Blade treatment: -
Handle: leather and brass discs
Blade length: 105mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 225mm.
Balance: set back, at 2cm.
Weight: 163g.
Closure: -
Clip: -
Sheath: Leather
Note:

Intended Use: Utility / Collection

Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balance: Advanced
Weight: 450g.
Sheath: thermoformed kydex, with double belt loop, M.O.L.L.E. compatible.
Package: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by hand

Intended Use: Utility / Collection

Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Marble
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balance: Advanced
Weight: 450g.
Sheath: thermoformed kydex, with double belt loop, M.O.L.L.E. compatible.
Package: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by hand

Intended Use: Utility / Collection

Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Black Blood
Handle: Micarta
Blade Length: 105mm.
Blade thickness: 5mm.
Total lenght: 235mm.
Balance: backward
Weight: 271g.
Sheath: thermoformed kydex, with M.O.L.L.E. compatible belt loop.
Package: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by hand

Production type: Heavy duty hiking / Collection

Production type: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Marble
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balance: set back from the guard branch
Weight: 644g.
Scabbard: Kydex, thermoformed
Packaging: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by hand

Knife collected from private collection - 2014 model entirely handmade by Allen Elishewitz - Like new, original sharpening - Supplied with nylon pouch with velcro - Checked and certified by our internal laboratory Coltelleria Collini.

Intended use: Collection 

Kind of production: Handmade
Country of production: USA
Blade: handcrafted and beveled, in CTS-C75P stainless steel (Latrobe BG-42)
Blade treatment: handmade satin finish with Allen Elishewitz golden punch
Handle: titanium liners "crushed ice" with carbon fiber and copper grips with handmade bronze bolsters
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total lenght: 223mm.
Thickness when closed: 16mm.
Weight: 199g.
Closure: Liner Lock
Clip: Removable, inegral carbon fiber
Notes: Entirely handcrafted by Allen Elishewitz - 2014 model, like new - from private collector - Supplied with nylon velcro pouch.

Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely hand-made limited series of prototypes, in just 10 specimens, all different from each other, of the new Centuria fixed blade model that smoothly blends the typical design together. of ancient Roman daggers with iconic American World War II combat knives.

Intended use: Collection

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balancing: advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: This knife is part of an exclusive lot of handcrafted prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, processes, bevels and grindings that make the 10 pieces all completely different from each other.

Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely handmade limited edition of prototypes, in only 10 pieces all different from each other, of the new fixed blade model Centuria that smoothly blends together the typical design of the ancient Roman daggers with the iconic American combat knives of World War II.

Intended Use: Collection

Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: Advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.

Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely handmade limited edition of only 10 different prototypes of the new Centuria fixed blade model that smoothly blends together the typical design of ancient Roman daggers with the iconic American combat knives of World War II.

Intended Use: Collection

Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: Advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.

Destinazione d'uso: Utility / Collezione

Tipo di produzione: Artigianale
Paese di produzione: Italia
Lama: in acciaio D2 a 59/60HRC
Trattamento lama: Raw
Manicatura: Micarta
Lunghezza lama: 105mm.
Spessore lama: 6mm.
Lunghezza totale: 235mm.
Bilanciatura: arretrata
Peso: 319g.
Fodero: in cuoio marrone
Confezione: privo di imballo - fornito con certificato di originalità e garanzia Wander Tactical
Note: Ogni coltello è unico e realizzato artigianalmente; possono esserci leggere differenze di finiture, colori e materiali rispetto al prodotto fotografato.

Dino Picco, knife maker and lead designer of Wander Tactical, has created a limited edition of only 10 different prototypes of the new fixed blade model Centuria, which smoothly blends together the typical design of ancient Roman daggers with the iconic American combat knives of World War II.

Intended Use: Collection

Type of production: Custom
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: Advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.

Intended Use: Collection / Heavy Duty

Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folder with micarta handle
Blade length: 95mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total lenght: 214mm.
Thickness when closed: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade.
Closure: Rockers Arm 8.11
Clip: titanium stone washed, removable and reversible
Package: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely hand made, each piece is different from the previous one for aesthetic finishing.

Intended Use: Collection / Heavy Duty

Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folder with micarta handle
Blade length: 95mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total lenght: 214mm.
Thickness when closed: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade.
Closure: Rockers Arm 8.11
Clip: titanium stone washed, removable and reversible
Package: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely hand made, each piece is different from the previous one for aesthetic finishing.

Intended use: Collection

Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018

Acknowledgments

Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:

in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"

always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"

I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade

then in 2007 at "Scarperia" I won the third prize for best folding

but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.

Presentation of the craftsman

Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.

The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!

I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.

Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.

What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".

They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .

The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.

Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.

With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.

I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".

Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.

For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.

Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...

special knife made by Wander Tactical in April 2021

Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique piece

special knife made by Wander Tactical in April 2021

Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique piece

special knife made by Wander Tactical in April 2021

Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique piece

Intended use: Tactical / EDC

Type of production: semi artisanal
Country of production: USA
Blade: CPM-S35V steel
Blade treatment: Black PVD
Handle: anodized titanium with a thickness of 3.5mm per folder
Blade length: 75mm.
Blade thickness: 4.5mm.
Closed length: 97mm.
Total length: 170mm.
Thick when closed: 12.5mm.
Balancing: backward
Weight: 142g.
Opening: Ambidextrous thumbstood on the blade
Washers: in brass
Closure: Framelock
Clip: in titanium, removable
Packaging: tactical case in polymer with Medford logos
Notes: Skull Crasher on Shank - Designed and built by Greg Medford

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 2430mm.
Blade thickness: 6.5mm.
Total length: 400mm.
Balancing: backward
Weight: 712g.
Sheath: in thermoformed kydex and leather
Packaging: -
Notes: exclusive model produced in just two pieces and handcrafted

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade Finish: Moon Effect
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balancing: backward
Weight: 644g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: unique and handcrafted knife

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 240mm.
Blade thickness: 6.5mm.
Total length: 400mm.
Balancing: backward
Weight: 702g.
Sheath: thermoformed kydex
Packaging: -
Notes: unique and handcrafted knife

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Moon Effect
Handle: Micarta
Blade length: 240mm.
Blade thickness: 6.5mm.
Total length: 400mm.
Balancing: backward
Weight: 715g.
Sheath: thermoformed kydex
Packaging: -
Notes: unique and handcrafted knife