Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Never used, complete with all accessories, knife like new, a few small scratches on the leather sheath
* Available on the market: Available
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete
* Sheath: Present, with a few small scratches
* Manuals, certificates, and warranties: Present
* Checked and certified by our in-house laboratory

Intended use: Utility/Outdoor

Type of production: Industrial
Country of production: Italy
Blade: Niolox 59/61HRC stainless steel with Black Idroglider finish
Handle: Bison Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: advanced to 1cm
Weight: 235g.
Sheath: leather
Packaging: cardboard box with Fox logos
Notes: previously purchased knife from a private collection

Intended Use: Sport / Collection

Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel hardened selective
Treatment Blade: -
Handle material: Leather Rings
Blade length: 329mm.
Blade thickness: 5.5mm.
Length closed: -
Overall length: 450mm.
Thick when closed: -
Balancing: -
Weight: 832g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos Down Under Knives
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Collected from a private individual, previously purchased.
* Condition: Never used, absolutely like new
* Commercially available: Still in production, hard to find
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Marketed by manufacturer without a box
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

This replica of Major Von Tempsky's 6.5” Bowie knife is inspired by the design of the knife he created and assigned to his company of Forest Rangers in 1863.

Gustavus Ferdinand von Tempsky (1828-1868) was a German-born adventurer, soldier and artist, known for his role in the New Zealand Wars and for his leadership among the Forest Rangers. His adventurous life and courage made him a legendary figure, particularly in the context of battles between European settlers and Māori peoples.

He learned the advantages of Bowie knife fighting in California during his stint as a prospector, where he had acquired an excellent American-made knife; once he arrived in New Zealand and found himself in charge of Forest Ranger Company No. 2 with the rank of major, he had about 30 Bowie knives made for his men according to his personal design by a blacksmith in Shortland St. Auckland. The Forest Rangers were an elite corps of mounted scouts employed by the colonial government between August 1863 and October 1867 during the New Zealand Wars.

At the time, knives were made of wagon spring steel, one of the few steels available to blacksmiths in Auckland in 1863, and Von Tempsky, an experienced fighter, taught his men the use of the Bowie knife in hand-to-hand combat. The knife was used to defend against enemy blows while a pistol was usually held in the other hand.

In addition to combat, Bowie knives were used to open paths in the forest, dig defensive positions, cut firewood, and for general use while camping.

Use: Heavy Duty / Collection

Type of production: Handcrafted
Country of manufacture: New Zealand
Blade: full tang made of 8670 spring steel, high carbon content
Blade Finish: Direct heat treatment, which goes to create special color play on the blade
Handle: Wenge wood with carbon steel through-guard
Blade length: 165mm.
Blade thickness: 6mm.
Total length: 283mm.
Balance: advanced
Weight: 600g.
Sheath: leather
Packaging: unwrapped, sold certificate of warranty and authenticity
Notes: previously purchased knife, never used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Never used, absolutely like new
* Commercially available: Still in production, hard to find
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Marketed by manufacturer without a box
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

This replica of Major Von Tempsky's 11” Bowie knife is inspired by the design of the knife he created and assigned to his company of Forest Rangers in 1863.

Gustavus Ferdinand von Tempsky (1828-1868) was a German-born adventurer, soldier and artist, known for his role in the New Zealand Wars and for his leadership among the Forest Rangers. His adventurous life and courage made him a legendary figure, particularly in the context of battles between European settlers and Māori peoples.

He learned the advantages of Bowie knife fighting in California during his stint as a prospector, where he had acquired an excellent American-made knife; once he arrived in New Zealand and found himself in charge of Forest Ranger Company No. 2 with the rank of major, he had about 30 Bowie knives made for his men according to his personal design by a blacksmith in Shortland St. Auckland. The Forest Rangers were an elite corps of mounted scouts employed by the colonial government between August 1863 and October 1867 during the New Zealand Wars.

At the time, knives were made of wagon spring steel, one of the few steels available to blacksmiths in Auckland in 1863, and Von Tempsky, an experienced fighter, taught his men the use of the Bowie knife in hand-to-hand combat. The knife was used to defend against enemy blows while a pistol was usually held in the other hand.

In addition to combat, Bowie knives were used to open paths in the forest, dig defensive positions, cut firewood, and for general use while camping.

Use: Heavy Duty / Collection

Type of production: Handcrafted
Country of manufacture: New Zealand
Blade: full tang made of 8670 spring steel, high carbon content
Blade Finish: Direct heat treatment, which goes to create special color play on the blade
Handle: Wenge wood with S-shaped carbon steel through-guard
Blade length: 280mm.
Blade thickness: 7mm.
Total length: 425mm.
Balance: advanced
Weight: 925g.
Sheath: leather
Packaging: unwrapped, sold certificate of warranty and authenticity
Notes: previously purchased knife, never used, from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: Nylon pouch with zipper, with Randall Knives logos
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: Original warranty sheet
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Desert Ironwood and leather, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: Desert Ironwood and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 270g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new - provided with Randall Knives zippered nylon pouch and paper warranty

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few imperceptible marks due to time.
* Marks on handle: None
* Box: Present
* Scabbard: Present, with a few small marks due to time.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel rolled 3G (SGPS) 62HRC
Blade Finish: Satin finish
Handle: Micarta Brown
Blade Length: 90mm.
Blade thickness: 4.5mm.
Total Length: 195mm.
Weight: 180g.
Sheath: Brown Leather
Packaging: cardboard box with Fallkniven logos
Notes: previously purchased knife from a private collection

The Model 26 Pathfinder is an excellent lightweight skinning and outdoor knife. The blade design favours both cutting and pointing work. This knife has become one of the most popular small hunting knives.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Good overall condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: Slight on the guard, the deer part is parts as new
* Packaging: -
* Scabbard: Original, leather, in good condition, some marks on the front
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Deerskin
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 215mm.
Balance: set back about 2cm from the guard
Weight: 124g. (206g. scabbard included)
Sheath: brown leather with belt loop
Notes: -

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Commercially available: unique handcrafted piece
* Sharpening: original
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: -
* Manuals, Certificates and Guarantees: YES
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Handcrafted
Blade production: Italy
Blade: C70 stainless steel
Blade treatment: -
Handle: ram horn
Blade length: 125mm.
Blade thickness: 3mm.
Closed length: 155mm.
Total length: 280mm.
Thickness when closed: 19mm
Balance: -
Weight: 105g.
Closure: without blade lock
Clip: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Morittu
Notes: -

Nino Morittu - Knifemaker from Silanus, Province of Nuoro

Nino Morittu creates unique knives, pieces of rare artisanal beauty designed, drawn and finished personally. Each knife is a masterpiece of exceptional craftsmanship, demonstrating his skill in the art of knifemaking. His works, regularly exhibited at various knife shows, have gained wide recognition from collectors and amateurs alike. Morittu prefers the use of C70 type steels and does not produce in large quantities, keeping each piece exclusive thanks to his meticulous artisanal method.

The precision in the details makes his knives almost perfect, testifying to a deep love for work well done. Aesthetically superb, they represent excellent craftsmanship and a passion for quality materials. Morittu's creations are exhibited in internationally renowned museums such as Albacete in Spain, Montreal in Canada, as well as in the United States and Berlin, Germany.

Renowned for his perfectionism, Morittu is often compared to Calaresu, another master knifemaker known for his attention to detail. A distinctive feature of his work is the exclusive use of "paired" horns for the handles, ensuring that there are never any visual disparities between the scales.

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Commercially available: unique handcrafted piece
* Sharpening: original
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: -
* Manuals, Certificates and Guarantees: YES
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Handcrafted
Blade production: Italy
Blade: C70 stainless steel
Blade treatment: -
Handle: ram horn
Blade length: 120mm.
Blade thickness: 3mm.
Closed length: 155mm.
Total length: 280mm.
Thickness when closed: 19mm
Balance: -
Weight: 114g.
Closure: without blade lock
Clip: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Morittu
Notes: -

Nino Morittu - Knifemaker from Silanus, Province of Nuoro

Nino Morittu creates unique knives, pieces of rare artisanal beauty designed, drawn and finished personally. Each knife is a masterpiece of exceptional craftsmanship, demonstrating his skill in the art of knifemaking. His works, regularly exhibited at various knife shows, have gained wide recognition from collectors and amateurs alike. Morittu prefers the use of C70 type steels and does not produce in large quantities, keeping each piece exclusive thanks to his meticulous artisanal method.

The precision in the details makes his knives almost perfect, testifying to a deep love for work well done. Aesthetically superb, they represent excellent craftsmanship and a passion for quality materials. Morittu's creations are exhibited in internationally renowned museums such as Albacete in Spain, Montreal in Canada, as well as in the United States and Berlin, Germany.

Renowned for his perfectionism, Morittu is often compared to Calaresu, another master knifemaker known for his attention to detail. A distinctive feature of his work is the exclusive use of "paired" horns for the handles, ensuring that there are never any visual disparities between the scales.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Very Good
* Commercially available No.
* Sharpening: Factory.
* Marks on blade: A few small marks
* Marks on handle: A few small marks on the guard branch.
* Packaging: /
* Scabbard: Leather, handcrafted, in good condition.
* Manuals, Certificates and Warranties: Certificate of Authenticity.
* Checked and Certified by our in-house laboratory

Knife handcrafted by Master C.IC. (Italian Knifemakers Guild) Angelo Scotti. A classic sporting model hunting use that recalls the typical styles of Loveless.

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: full tang, RWL stainless steel hardened to 60 HRC
Blade finish: satin-finished
Handle: Ebony wood and stainless steel guard
Blade length: 95mm.
Blade thickness: 3mm.
Total length: 207mm.
Weight: 147g.
Sheath: handcrafted, leather, hand-stitched
Packaging: /
Notes: previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: Factory
* Marks on blade: A few small marks
* Marks on handle: A few small marks on the guard branch.
* Packaging: /
* Scabbard: Leather, handcrafted, in good condition.
* Manuals, Certificates and Warranties: Certificate of Authenticity.
* Checked and Certified by our in-house laboratory.

Knife handcrafted by Accredited Member C.IC. (Italian Knife Maker's Guild) Livio Montagna. A classic sporting model for hunting use with exotic Black Palm wood handle.

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: full tang, RWL stainless steel hardened to 59/60 HRC
Blade finish: mirror polish
Handle: Black Palm wood and 416 stainless steel guard welded in argentine
Blade length: 126mm.
Blade thickness: 4mm.
Total length: 230mm.
Weight: 189g.
Sheath: handcrafted, leather, hand-stitched
Packaging: /
Notes: previously purchased knife, from a private collection

Type of production: Handmade
Country of Production: Italy
Blade: Sleipner steel at 60HRC
Blade Finish: PVD
Handle: Ironwood with FatCarbon Darkmatter guard and carbon fiber pins
Blade length: 115mm.
Blade thickness: 6mm.
Total length: 244mm.
Balance: set back 3cm from the guard branch
Weight: 265g.
Scabbard: handcrafted and hand-stitched leather
Package and certificate: cordura pouch and certificate of authenticity
Notes: unique knife and handcrafted for Coltelleria Collini in Busto Arsizio - no. 254

The "Lurisinca," a traditional knife from Luras in Gallura, owes its name to the Lurese term for a local woman, reflecting the feminine nature of the "razor blade" used. The Gallurese Razor Blade, a typical Sardinian knife resembling a point-less shaving razor, was essential in cork processing, especially for making "quadretti," precursors to cork stoppers. However, this practice has declined due to the economic crisis, forcing many craftsmen to close their shops. The Gallurese Razor Blade, versatile and always at hand, represented an indispensable tool for every daily need.

Type of Production: Handcrafted
Blade Production: Italy
Blade: Stainless steel
Handle: Bovine horn tip
Blade Length: 80mm.
Blade Thickness: 2mm.
Closed Length: 90mm.
Total Length: 185mm.
Weight: 65g.
Lock: No blade lock
Packaging: Cardboard box

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co hardened to 59/60 HRC
Blade finish: satin finish
Handle: Snakewood - 416 stainless steel guard and pommel
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 240mm.
Weight: 185g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from a private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

Type of Production: Handcrafted
Blade Production: Italy
Blade: Apex Ultra steel at 63HRC
Blade Finish: Stone Washed
Handle: Ironwood, G10, and carbon pins
Blade Length: 90mm
Blade Thickness: 4.8mm
Total Length: 204mm
Balance: Set back 3cm from the guard branch
Weight: 179g
Sheath: Hand-stitched and crafted leather
Notes: unique knife handcrafted for Coltelleria Collini of Busto Arsizio - No. 310

Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw
Handle: Micarta
Blade length: 135mm.
Blade thickness: 5.5mm.
Total length: 250mm.
Balancing: advanced
Weight: 377g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased from Lorenzi's cutlery shop in Milan, via Monte Napoleone, presumably in the 1980s.
* Condition: In good condition
* Commercially available: the craftsman long ago stopped making knives.
* Sharpening: Factory original, can be improved, with some cosmetic abrasion
* Marks on blade: Small marks and slight hairlines also on the through-guard.
* Marks on handle: A few small marks.
* Packaging: absent
* Scabbard: Leather, handcrafted, original, stamped "Coltelleria Lorenzi," with marks given by use and time
* Manuals, Certificates and Warranties: absent.
* Checked and Certified by our in-house laboratory

Intended use: collection/tactical

Type of production: handcrafted
Country of manufacture: USA
Blade: full tang stainless steel, steel composition not stated (presumably RWL34 or 440C)
Blade finish: mirror polish
Handle: nickel silver through-guard and brown micarta grips, with red spacers
Blade length: 97mm.
Blade thickness: 4mm.
Total length: 202mm.
Weight: 97g.
Sheath: handcrafted, leather, with stainless steel back clip
Packaging: -
Notes: Specimen presumably from the 1980s, previously purchased knife, from a private collection

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Good
* Commercially available No
* Sharpening: Original
* Marks on the blade: Some scratches on the pommel, blade and guard in very good condition
* Marks on handle: Some assembly inaccuracies near the pommel, adhesive residues
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and certified by our in-house laboratory

Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Reproduction of one of the various versions of the Arkansas Toothpick, legendary frontier knife of the American 1800s. Famous, often infamous, it generally has a 30 to 50 cm blade, rather narrow and sometimes symmetrical, dagger-style. Used mainly for hunting and personal defence.

Livio Montagna's version is aesthetically very similar to the Toothpick used in Expandables 2.

The knife is distinguished by an excellent overall balance, allowing control and precision in use. The finish is of a good standard.

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: hardened 440C steel at 58/59 HRC
Blade finish: satin finish
Handle: Ebony - 416 stainless steel guard and pommel
Blade length: 305mm.
Blade thickness: 6mm.
Total length: 445mm.
Weight: 722g. (960g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -

The Wander Tactical Uro Saw knife is an extremely robust and versatile survival knife. The blade is made of D2 steel, which ensures a long life and good resistance to wear and corrosion. The length of the blade is approximately 16 cm and has a serration on the top

The handle of the knife is made of micarta, a resistant and non-slip material that guarantees a secure grip even in humid or sweaty conditions. The length of the handle is approximately 13cm and features an ergonomic design, making it very comfortable to hold even for extended periods.

The Uro Saw knife comes with a Kydex sheath, which protects and keeps it safe during transport. Furthermore, the scabbard can be easily attached to a belt or trousers thanks to its quick release system.

In summary, the Wander Tactical Uro Saw knife is a great choice for those looking for an extremely robust and versatile survival knife, very interesting for camping, hiking and survivalism enthusiasts.

Intended use: Utility / Collection

Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Marble
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balancing: advanced
Weight: 430g.
Sheath: in thermoformed kydex, with double belt loop, M.O.L.L.E. compatible
Packaging: without packaging, accompanied by certificate of authenticity, version with hallmark with WT and DP marks
Notes: Each knife is unique and made entirely by hand

The Wander Tactical Lynx knife is an excellent option for anyone looking for a robust and reliable knife. The blade is made of D2 steel, which offers good resistance to wear and corrosion. The length of the blade is approximately 10cm and has a clip point shape, making it ideal for many outdoor activities.

The handle of the knife is made of micarta, a resistant and non-slip material that offers excellent grip even in humid or sweaty conditions. The length of the handle is approximately 12cm which gives a good balance to the knife, making it easy to handle and control.

The Lynx knife comes with a Kydex sheath, which protects and keeps it safe during transport. In addition, the cover can be easily attached to a belt or trousers thanks to its quick fastening system.

Overall, the Wander Tactical Lynx knife is an excellent choice for anyone looking for a reliable and durable knife for outdoor activities. With its sturdy blade, non-slip handle and Kydex sheath, the Lynx knife is a very attractive option for hikers, campers and outdoor enthusiasts.

Intended use: utility / bushcraft

Type of Production: Artisanal
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backwards
Weight: 260g.
Sheath: kydex
Packaging: -
Notes: Each knife is unique and handcrafted

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably from the late 1970s/early 1980s.
* Condition: In very good condition
* Commercially available On order, with waiting list.
* Sharpening: Factory original, can be improved.
* Marks on blade: Small horizontal marks due to insertion and removal from scabbard.
* Marks on handle: A few small marks on aluminum tang.
* Packaging: -
* Scabbard: Leather, handcrafted, original.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory



Intended use: hunting / fishing / light hiking

Type of production: handcrafted
Country of production: USA
Blade: O1 steel
Blade finish: satin finish
Handle: leather rings, brass guard, duralumin pommel
Blade length: 115mm.
Blade thickness: 3.8mm.
Total length: 230mm.
Weight: 130g.
Scabbard: handmade, leather, for vertical carrying on belt
Packaging: -
Notes: Specimen presumably late 1970s/early 1980s in excellent condition - previously purchased knife from a private collection

History of the Model
The Model 7 was designed as a scaled-down version of the Model 3 Hunter.

Almost immediately, the idea of a scaled-down version of the new Hunter dawned on Bo Randall as an ideal knife for his fellow anglers. An avid fisherman since his youth, Bo regarded this new knife as a labor of love and immediately set to work on the project. At first he tried 4- and 4.5-inch blades, but then opted for the 4 1/2-inch one. Bo wanted the right handle for cleaning brook trout and similar sized fish, so he reduced the size of the handle of the new Hunter and changed its shape. Naturally, he called this model the "Fisherman," and some early prototypes with 4-inch blades were delivered to some dealers during the latter part of September 1945.

Type of production: Artisan
Country of production: Italy
Blade: 60HRC Sleipner Steel
Blade Finish: PVD
Handle: Black Stabilised Birch with FatCarbon Darkmatter guard and carbon pins
Blade length: 150mm.
Blade thickness: 6mm.
Total length: 294mm.
Balance: on the guard branch
Weight: 360g.
Scabbard: hand worked and sewn leather
Packaging and certificate: Cordura pouch and certificate of authenticity
Notes: unique knife handcrafted for Coltelleria Collini in Busto Arsizio - no. 256

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Conditions: in like new condition
* Commercially available: Out of production, model dating back to the 90s
* Sharpening: Factory
* Marks on blade: No
* Signs on handle: No
* Box: with original box in perfect condition
* Sheath: -
* Manuals, Certificates and Warranties: certificate with serial number
* Checked and Certified by our internal laboratory

Intended use: Collection / Vintage / Multipurpose

Type of production: artisanal
Country of production: Germany
Blade: stainless steel
Blade finish: satin finish
Handle: engraved wood
Blade length: 68mm.
Blade thickness: 2.0mm.
Total length: 155mm.
Balancing:
Weight: 130g.
Scabbard: -
Packaging: -
Notes: Vintage 90s knife

Vintage knife produced in Portland in 1972 characterized by an extremely penetrating full flat type of sharpening, designed specifically for hunting use - Knife withdrawn from private collection - Overall in very good condition - Never used, a few small marks on the leather sheath, due to the passage of time - Free of packaging - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Collection / Vintage / Hunting

Type of production: industrial
Country of manufacture: USA
Blade: 440C stainless steel
Blade finish: mirror polish
Handle: stainless steel guard and pommel, brass spacers, macassar ebony handle
Blade length: 115mm.
Blade thickness: 3mm.
Total length: 225mm.
Balance: backward
Weight: 191g.
Sheath: leather
Packaging: -
Notes: Vintage knife from 1972 - Withdrawn from private collection globally in very good condition - Unpacked

The Rocky Mountain Spike is the result of several months of testing and fine-tuning in the field. The original design was to flank or add a large knife, such as a TOPS Machete or Power Eagle, to offer the user a variety of other applications on smaller projects. The size and steel mass of large knives certainly have their place. However, every once in a while a situation arises where one wishes to have a smaller knife, and particularly one with a narrow blade.

After using and abusing the prototypes in the field, those who have tested the small Rocky Mountain have seen a wide variety of cutting, scraping, splitting, EDC, and separating tasks for which this tool can be used effectively.

We now believe that the Rocky Mountain Spike is an excellent stand-alone toolfor hikers, bikers, campers, boaters, weekend outdoor enthusiasts, and long trips. It can be worn on your belt or kept in your backpack, boot or any other convenient place. Whether it is for general outdoor activities, at work or at home, this is the tool for you.

Intended Use: Utility

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Sandstorm Bronze
Handle: 1095 58/60HRC steel
Blade length: 8.9mm.
Blade thickness: 4.5mm.
Total length: 185mm.
Balance: on the guard branch
Weight: 70g.
Sheath: leather
Packaging: transparent plastic bag
Notes: emergency whistle 

Rare knife produced by Chris Reeve in 2007 and no longer in production since 2013. Knife from a private collection in like new condition, with original sheath, without original box and certificate. Checked and certified by our internal laboratory.

Intended use: sports / hunting

Blade: CPM-S30V 58 / 59HRC stainless steel
Blade treatment: stonewash finish
Handle: Cocobolo wood
Blade length: 88mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 201mm.
Balancing: set back
Weight: 76g.
Closure: -
Clip: -
Sheath: in leather
Notes: inyoni in Zulu means bird

Intended Use: Utility / Hunting

Production type: Industrial
Country of Production: Germany - Solingen
Blade: ful tang stainless steel AEB-L
Blade finish: Satin finish
Handle: Walnut Briar
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 153mm.
Weight: 65g.
Scabbard: leather, with clip attack
Package: cardboard box with Boker logos
Notes: Design by Lucas Burnley

Intended Use: utility / bushcraft

Type of Production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade Length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 260g.
Sheath: kydex
Package: -
Notes: Each knife is unique and handcrafted

From a private collection, this is a model no longer in production that reproduces the Argentine national knife: a blade with a simple shape that is ideal for almost everything from hunting, repair of harnesses and saddles, cooking and eating meals.

In very good condition, it shows some signs of light oxidation on the blade. Checked and certified by our internal laboratory Coltelleria Collini.

Intended use: hunting, cooking

Type of production: industrial
Blade: carbon steel 1090
Country of production: India
Handle: Malaysian Sai Wood
Blade length: 300mm.
Blade thickness: 5mm.
Total length: 447mm.
Balance: forward, 4cm. from the handle
Weight: 542g. (709G. scabbard included).
Scabbard: leather, with metal trim
Notes: -

Intended use: hunting / sports / collection

Type of production: industrial
Blade: A2 carbon steel
Production Lama: USA
Handle: Green Canvas micarta
Blade length: 140mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 270mm.
Balancing: -
Weight: 262g.
Closure: -
Clip: -
Sheath: Brown Leather
Notes: made by Bark River

Intended Use: Tactical / Light Utility

Production type: Industrial
Country of Production: Italy
Blade: Full tang, Sleipner steel 59/61HRC
Blade Finish: Black DLC
Handle: Micarta
Blade length: 152mm.
Blade thickness: 6mm.
Total length: 296mm.
Balance: backward
Weight: 260g.
Scabbard: Kydex with Tek-Lok multi-position locking system.
Package: Cardboard box with Viper Knives logos
Notes: Design by Tommaso Rumici - 2021 version of the Fearless model, originally produced in 2006 with N690Co stainless steel.

Intended use: Hard Utility / Collection

Type of production: Handmade
Country of production: Italy
Blade: 59 / 60HRC D2 steel
Blade finish: Raw
Handle: Micarta
Blade length: 155mm.
Blade thickness: 5.5mm.
Total length: 255mm.
Balancing: advanced
Weight: 475g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Intended use: Pocket knife

Type of production: industrial
Blade: 19C27 stainless steel
Blade treatment: -
Handle: snakewood
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 160mm.
Balancing: -
Weight: 65g.
Closing: -
Clip: -
Notes: aluminum box

Japanese steel blends with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the type of foreign steel and the laminated structure.

Tryceratops Model .:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbonaceous) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 130mm.
Balancing: backward
Weight: 184g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.

Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:

Intended use: Collection / Sports

Type of production: Artisan
Lama production: Japan
Blade: Forged by hand, in Hitachi Shirogami 64HRC carbon steel
Blade treatment: -
Handle: traditional Japanese bamboo wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: -
Total length: 215mm.
Thickness when closed: -
Balancing: -
Weight: 80g.
Closure: -
Clip: -
Sheath: bamboo wood
Packaging: Carton box
Notes: entirely handmade by Takeshi Saji

Tommaso Rumici explains his knife: "Drawing the Octopus I wanted to create a knife that was versatile enough to be interesting for the various types of Fox customers: sporting, hunting and military, the result is, in my opinion, an excellent compromise between portability and performance: it will never be too big or heavy to have it with you in time of need. "

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel laminated SanMai 420J2 / VG10 to 60 / 62HRC
Blade treatment: Satin
Handle: Ziricote wood
Blade length: 115mm.
Blade thickness: 4mm.
Total length: 240mm.
Balancing: -
Weight: 170g.
Sheath: in leather
Packaging: cardboard box with Fox logos
Notes: design by Tommaso Rumici

Intended use: Tactical / Utility

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade Treatment: Black Coating
Handle: Ultramid
Blade Length: 89mm.
Blade thickness: 4.2mm.
Overall length: 192mm.
Balance: backward, 2 cm from the lower guard branch
Weight: 181g.
Sheath: in Nylon, compatible with M.O.L.L.E.
Packing: Cardboard box with Ka-Bar logos
Notes: Design by Jesse Jarosz

Intended use: Tactical / Utility

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflon coated
Handle: Ultramid
Blade Length: 155mm.
Blade thickness: 5mm.
Total Length: 287mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 338g.
Sheath: kydex