Sport, Military and Collectible Knives | Coltelleria Collini

Pohl Force - Alpha Three Desert Tanto - USED - PRIVATE COLLECTION - knife

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Mechanically in excellent condition; cosmetically in acceptable condition; shows several signs of use on the blade finish, liners, and handle that do not compromise its use in any way
* Commercially available: Discontinued
* Sharpness: Factory-sharpened; could be improved
* Marks on blade: Several signs of use and wear
* Marks on handle: Several signs of use and wear
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

The Alpha Three model, an evolution of the Alpha Two, was designed by Dietmar Pohl in collaboration with police and special forces instructors from the H3 Training Division. This knife is engineered for heavy-duty use; thanks to its substantial size, it is well-suited for use while wearing gloves.

Intended Use: Utility / Multi-purpose
Manufacturing Type: Industrial
Blade: D2 steel
Blade Finish: Burnished
Handle: Zytel with internal burnished stainless steel liners
Blade Length: 113 mm
Blade Thickness: 5 mm
Overall Length: 260 mm
Thickness when closed: 18 mm
Balance: 1 cm rearward from the guard
Weight: 260 g
Closure: Back Lock
Packaging: -
Notes: equipped with a skull crusher / glass breaker on the back—knife previously purchased and used, from a private collection

PF-A3D-CP

€147.54

Only 1 left

Only 1 left
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife

This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.

Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs

Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm

50075

€143.44

Only 1 left

Only 1 left

Rating:
87%
4.4
Conaz Consigli Scarperia - Fiorentino Bovino knife cm 24 - 50018 - knife

Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 148g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

R-FIC24

€274.59

Only 1 left

Only 1 left

Rating:
93%
4.7
Consigli Scarperia - Calabrese in bovine R-CAC20 - knife

A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip

50004

€176.23

Only 1 left

Only 1 left

Rating:
90%
4.5
Consigli Scarperia - Casertano in bovine R-CASC20 - knife

The most striking feature of this model is in the edge of the blade, a full right to the tip. The Casertano lent itself well to a variety of uses, thanks to the cutting edge straight that finishes in a very simply shaped handle. This solution was very appreciated in different times and places, even outside the area where it originated, as to be still widespread. The Caserta is a model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 70 gr.
Handle in horn tip

R-CASC20

€171.31

Only 1 left

Only 1 left

Rating:
90%
4.5
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 20cm - 53162 - knife

Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

53162

€90.16

Only 1 left

Only 1 left

Rating:
100%
5
Consigli Scarperia - Maremma in Olivo - Series Kilama MFO18 - knife

Maremma in Olivo - Series Kilama MFO18 - knife

The series Kilama Councils is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
that reflect the traditional and regional Italian classics knives.

Total length: 185
Blade length: 80
blade thickness: 2.5
weight. 55g
Steel: 420
manicatura: amaranth wood
Sheath: fabric
Package: Box Advice with cleaning kit knife

50157

€118.03

Only 1 left

Only 1 left
Conaz Consigli Scarperia - Senese knife in amaranth - Kilama series SEAM18 - knife

The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: amaranth wood
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 185mm.
Weight: 55g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

SEAM18

€89.34

Only 1 left

Only 1 left
Conaz Consigli Scarperia - 24cm ox horn Zuava with blade lock - 50079 - folding knife, made in Italy

Intended use: collection

Type of production: handmade
Country of Production: Scarperia - Italy
Blade: stainless steel X50CrMoV15
Blade finish: satin-finished
Handle: ox horn and brass
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Weight: 193g.
Closure: blade lock
Packaging: cardboard box with Consigli logos
Sheath: fabric pouch

Handicrafts are beautiful because they are varied!
The colors of the materials from which crafts are made may vary from those shown in the pictures.

Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

50079

€250.00

Only 1 left

Only 1 left

Rating:
100%
5
Consigli Scarperia - Rasolino in bovine RAC-20 - Knife

Rasolino in bovine RAC-20 - Knife

The name of this knife comes from the shape of the blade, reminiscent of the razor.
Had spread following the law Giolitti in 1908 which placed severe limitations to the port of sharp knives, and that favored the production of various models in a truncated tip.
The Rasolino is distinguished by the slight curvature of the blade and back to the shape of the handle.

Stainless steel blade 440.
Blade length 9 cm.
Blade thickness 2.5 mm.
Overall length 20 cm.
Weight 70 gr.

RAC-20

€163.11

Only 1 left

Only 1 left
Conaz Consigli Scarperia - Mugello 16 cm horn cattle raw E-CMC16G - knife

Mugello 16 cm horn cattle raw E-CMC16G - knife

Blade: 420 stainless steel
Handle: raw beef
Blade length: 75mm.
Overall length: 165mm.
Weight: 39g.
Closed Length: 90mm.

CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.

50306

€49.18

Only 1 left

Only 1 left

Rating:
77%
3.9

Out of stock
Conaz Consigli Scarperia - Arbus knife - Arburese Corone Montone 20cm - 53017 - knife

Characteristic Sardinian knife, typical of the Arbus area; with blade with a characteristic bellied shape, very suitable for leather. Traditional shapes and fine finishes.

The shape reached today derives from ancient styles used in past times.

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 85mm.
Blade thickness: 2mm.
Length closed: 115mm.
Total length: 205mm.
Weight: 50g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

53017M

€77.87

Only 1 left

Only 1 left

Rating:
100%
5
Conaz Consigli Scarperia - Maremmano Flat blade Olive - 50040 - knife

Knife in use for certain information until the first half of the 19th century in the Tuscan and Lazio Maremma.
Through finds from the criminological museum of Rome, he was seen among those knives handed over by the rioters of the penal baths of Civitavecchia to Cardinal Franco Pentini, in 1848, sent to put down a revolt.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 205mm.
Weight: 56g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.

50040

€162.30

Only 1 left

Only 1 left
Conaz Consigli Scarperia - Anconetano ox horn 20 cm - 50001 - knife

Traditional knife produced by master cutlers in Scarperia, a place where, since 1300, the artisan manufacture of Italian knives has continued.
Fisherman's knife, typical of the Adriatic sea belt. With external spring, handle in full polished bovine horn, on the end of the back it has a deep step at right angle useful for branching nets.
Intended use: Collection

Type of production: artisanal
Blade: X50CrMoV15 stainless steel
Production Lama: Italy
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 200mm.
Weight: 58g.
Closing:
Notes: handcrafted in the city of Scarperia (FI)

The colors of the materials with which our handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you. A slight surprise is therefore always accompanied by every online purchase of our handcrafted products: but this is also the beauty of craftsmanship.

50001

€172.13

Only 1 left

Only 1 left

Rating:
97%
4.9
Conaz Consigli Scarperia - Senese knife polished bovine horn 50063 - knife

The name clearly indicates the area of origin, but this knife became part of Scarperia's production perhaps as early as the nineteenth century, taking over from an older model called "scimitar" due to the hollow shape of the back of the blade towards the tip.
The handle has no metal seals, apart from the tiny raperelle on which the three pins are pressed, is thinned at the end, making it particularly light, and is made of solid horn.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 197mm.
Weight: 73g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

50063

€172.13

Only 1 left

Only 1 left
Conaz Consigli Scarperia - Tre Pianelle ox horn knife - 20 cm - 50071 - TPC20 - knife

The name of this knife, typical of Scarperia tradition, probably derives from the blade machining, which features three planes on each side.

During the 19th century, three different models were produced in Scarperia as part of the "stile knives" group, differing in the workmanship of the blade faces. As the first two models gradually disappeared, only one remained in production during the 20th century. Despite the aggressive blade shape, it was not considered a prohibited knife: the laws of the Grand Duchy of Tuscany first, and later those of the Kingdom of Italy, allowed its use.

Knife with horn tip, handcrafted in Italy.

Intended use: sporting/collection

Production type: handmade
Country of production: Italy
Blade: X50CrMoV15 stainless steel
Blade finish: satin finish
Handle: Ox horn and nickel silver
Blade length: 85mm.
Blade thickness: 2,5mm.
Closed length: 115mm.
Total length: 205mm.
Weight: 77g.
Locking system: no blade lock
Packaging: elegant box with Consigli logos
Sheath: fabric pouch

Craftsmanship is beautiful because it is varied

The colors of the materials used for handmade products may vary from those shown in the pictures.

Horn, wood and cornotech are raw materials that naturally show significant variations from one supply to another: this is the beauty of premium materials. Add the handmade workmanship, where the craftsman's hand never repeats the exact same gesture: this is the beauty of craftsmanship. Put all this together and you will always have a unique and different product. And always different from that one unique and unrepeatable product that we necessarily have to photograph to show you what we are talking about and what we are offering.

50071

€180.33

Only 2 left

Only 2 left
Consigli Scarperia - Fiorentino Buffalo Silver Engraved R-FIB20A - knife

Fiorentino Buffalo Silver Engraved R-FIB20A - knife

Craft knife regional product in Scarborough in use up to 800 in Tuscany.
The handle, in a single piece of horn, door foot in the characteristic ring round silver engraved.

Blade of carbon steel
Blade length: 8.5 cm
Blade thickness: 2.5 mm
Length open: 20 cm
Weight: 78 gr

0262

€223.77

Only 1 left

Only 1 left
Consigli Scarperia - Romano con anello 30cm - ox horn - 50060 - knife

The "Roman" testifies to the widespread mentality in the Papal States for which the knife was considered as a faithful friend to be constantly worn "in his pocket" and to be unleashed at the first hint of a fight or for an immediate response.

Many elements constituting the "Roman" bear witness to the offensive use that distinguished this knife: the sharp blade, the decorations of the lattice handle or fish bone that served to improve the grip, the locking system with fixed spring that prevented the knife could close up accidentally and that at the time of the opening emitted a dry noise that exalted the aggressive expression.

Destination of use: collection

Type of production: artisan
Blade: 420 stainless steel
Country of production: Italy
Grip: engraved ox horn
Blade length: 130mm.
Blade thickness: 2.5mm.
Length closed: 160mm.
Total length: 290mm.
Weight: 106g.
Closure: rear ring lock
Notes: made entirely by hand in the city of Scarperia (FI)

Weight: 140g.

50060

€385.25

Only 2 left

Only 2 left
Pohl Force - Foxtrott One Survival - Black PVD D2 & G10 + Titanium - USED / PRIVATE COLLECTION - 1037 - Knife

KNIFE PREVIOUSLY PURCHASED AND USED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Mechanically in excellent condition; cosmetically in good condition with noticeable signs of use and oxidation
* Commercial Availability: 2013 model, discontinued and no longer available on the market
* Sharpness: Factory-sharpened; could be improved
* Marks on the blade: Various signs of use on the PVD finish and several signs of oxidation beneath the PVD coating that in no way compromise its functionality or durability
* Marks on the handle: No marks on the titanium or G10; signs of oxidation on the steel clip
* Box: Included, partial set—the zippered nylon pouch that originally contained the knife is missing
* Manuals, Certificates, and Warranties: Included
* Inspected and certified by our in-house laboratory

Intended Use: All-Rounder Utility / Outdoor

Production Type: Industrial
Country of Manufacture: Italy (by LionSteel)
Blade: D2 steel
Blade Finish: Black PVD
Handle: G10 and Titanium
Blade Length: 114mm.
Blade Thickness: 5mm.
Closed Length: 145mm.
Overall Length: 260mm.
Thickness when closed: 15 mm.
Weight: 226 g.
Closure: Frame Lock with “RotoBlock” safety system
Clip: Removable and reversible, flush-mounted, stainless steel
Packaging: Cardboard box and warranty certificate
Notes: Knife previously purchased and used, from a private collection

PF1037CP

€0.00

Only 0 left

Only 0 left

Out of stock
Rockstead - Higo II knife F-HTI-ZDP - ZDP-189 & Titanium - PRIVATE COLLECTION - knife

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in excellent condition
* Availability on the market: Hard to find
* Sharpening: Factory-sharpened
* Marks on blade: A few small abrasions visible against the light on the mirror finish
* Marks on handle: None
* Box: Present and complete
* Sheath: /
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our in-house laboratory

The Rockstead HIGO II in titanium is not simply a high-end folding knife: it is the ultimate embodiment of Japanese philosophy applied to cutting, where every detail is pushed to the limits of perfection.

The minimalist, flawless titanium handle serves as a counterpoint to a ZDP-189 blade hardened to extreme hardness and finished with an almost unreal mirror polish. The result is not merely aesthetic: it is a living surface, capable of gliding through material with a smoothness and continuity that few knives in the world can offer.

Rockstead’s proprietary convex geometry does more than just cut: it separates, controls, and guides. It is a blade designed for those who recognize the difference between extreme sharpness and true long-term efficiency.

The HIGO II is an object for connoisseurs, where tolerances, treatments, and finishes are not mere technical specifications, but part of a precise language.

Intended use: Collectible / Sport

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: ZDP-189 stainless steel, hardened to 66.5 HRC
Blade finish: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Closed thickness: 12.2mm.
Weight: 136g.
Opening mechanism: ambidextrous pivot
Washers: brass
Closure: FrameLock with SKD11 striker at 61HRC
Clip: removable, 420J2 stainless steel with PVD coating
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: knife from a private collection, previously purchased

R-HIGOIIF-HTIZ-CP

€0.00

Only 0 left

Only 0 left

Rating:
100%
5

Out of stock
Pohl Force - Tactical Eight SW knife - D2 steel - 5004 - PRIVATE COLLECTION - knife

KNIFE RETIRED FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private collector, previously purchased – SERIAL NUMBER 21-0076
* Condition: Overall good, never used
* Market availability: Currently discontinued
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: not included
* Sheath: Kydex
* Manuals, Certificates & Warranty: not included
* Inspected and Certified by our internal laboratory

Based on the renowned MK-8, designer Dietmar Pohl developed the Tactical Eight, achieving a lighter and more compact tactical knife.

The robust Bowie blade, over 17 cm long and 6 mm thick, is suitable for a wide range of applications. To ensure excellent edge retention and blade resilience, the well-known D2 tool steel was selected.

The stonewashed finish creates a scratch-resistant surface and further improves corrosion resistance. A concealed hole at the end of the handle scales allows for the attachment of a lanyard (included).

The Tactical Eight Kydex® sheath, with a material thickness of 2.5 mm, provides a solid foundation for a durable and well-engineered carry system, fully meeting the demanding requirements of a tactical knife.

Intended use: Collection / Sport

Blade: Full tang D2 steel, 59/60 HRC
Handle: G-10
Blade length: 174 mm
Blade thickness: 6 mm
Overall length: 315 mm
Weight: 375 g (534 g with sheath)
Sheath: Kydex
Packaging: -

PF-5004-CP

€280.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Quebec Two Black TiNi - Limited Signature Edition - 2444S - PRIVATE COLLECTION - knife

KNIFE FROM A PRIVATE COLLECTION
Origin: Acquired from a private collector, previously purchased – Serial number: 22-0028
Condition: Overall good condition, never used
Availability: Limited edition, currently out of production
Sharpening: Factory edge
Blade marks: Minor marks, the most visible being a couple of light scratches on the right side
Handle marks: None
Box: Not included
Sheath: Kydex sheath with Pohl Force autograph, showing signs of wear
Manuals, certificates and warranty: Not included
Inspected and certified by our internal laboratory

The Quebec series by Pohl Force is an iconic mission knife that remained at the top of the wish list of founder and designer Dietmar Pohl for several decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to reinterpret the base design.

Originally developed as a Ground Forces Combat & General Purpose Weapon, this multi-purpose knife was designed for the United States Marine Corps in the early 1950s. Although never officially adopted, it clearly proved its capabilities during the Vietnam War, especially in the hands of U.S. special forces. Nearly 70 years after its first design, the modern Pohl Force Quebec Two perfectly combines classic old-school styling with high-tech modern manufacturing.

Designer Dietmar Pohl further revised the original concept, expanding the knife’s functional range. The blade of the Quebec Two is made from D2 tool steel instead of Sleipner, offering higher carbon and chromium content, significantly improving cutting performance and corrosion resistance. The blade has also been optimized with a cutting edge extended by 10 mm and an added false edge on the spine.

The Pohl Force Prepper System is integrated into the handle, allowing survival items to be securely stored inside. A tool for opening the handle screws is included. The advanced Pohl Force sheath system significantly enhances usability. The highly sophisticated sheath, made from 2.5 mm thick Kydex with belt adapter and leg strap, ensures excellent carrying comfort and versatility.

Overall length: 315 mm
Blade length: 190 mm
Blade thickness: 6 mm
Weight: 382 g (558 g including sheath)
Blade material: D2 steel
Blade finish: Titanium nitride coating
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5 mm Kydex with removable Cordura belt attachments
Included accessories: —

Notes: Each knife is individually numbered and personally signed by Dietmar Pohl on the Kydex sheath.

PF2444S-CP

€0.00

Only 0 left

Only 0 left

Out of stock
Rockstead - Hizen Pocket Knife - ZDP-189 & Black Duraluminium - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: 2022 model in excellent overall condition, a few imperceptible abrasions on the handle and a couple of superficial scratches visible only when held up to the light on the tip of the blade
* Available on the market: Difficult to find
* Sharpness: Factory sharp
* Marks on blade: a couple of superficial scratches visible only when held up to the light on the tip of the blade
* Marks on handle: a few imperceptible abrasions on the handle
* Box: Present and complete
* Sheath: /
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

The Rockstead brand, owned by Ishida Co. of Sakai, Japan, currently markets the best industrial knives currently in production.

Created by Katsumi Kitano, who has been producing high-quality knives for over 20 years and has been awarded the highest recognition among artisan knife makers in Japan, these knives are exceptional in terms of cutting ability, penetration, and edge retention, as well as in terms of innovation in the materials used and construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP-189 stainless steel at 67.3 HRC
Blade treatment: Mirror polished
Handle: A7075 duralumin with Hv400 hardness anodization
Blade length: 70mm.
Blade thickness: 3.3 mm.
Closed length: 104 mm.
Total length: 176 mm.
Closed thickness: 11.4 mm.
Weight: 74 g.
Closure: FrameLock with SUS420J2 50 HRC latch
Clip: removable, 1mm SUS420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, cardboard outer box, certificate with serial number and steel hardness test
Notes: Serial number 848 - Manufactured in 2022

R-HIZ-ZDP-CP

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Hornet XL knife - Custom Edition 2009 - 2013 - PRIVATE COLLECTION - Knife
KNIFE FROM A PRIVATE COLLECTION

Type: Knife previously purchased and withdrawn from a private collection

Condition: Like new, never used

Availability: Hard to find

Sharpening: Factory edge

Blade marks: None

Handle marks: None

Box: -

Sheath: Perfect, never used, made of Kydex

Manuals, Certificates, and Warranties: -

Checked and Certified by our internal laboratory

The Pohl Force Hornet XL Custom Edition 2009 is a high-quality tactical knife, the result of collaboration between Pohl Force and renowned American knifemaker Spencer A. Reiter. This limited edition of 500 numbered pieces offers a unique design and excellent performance, ideal for collectors and tactical knife enthusiasts.

Intended Use: Collection, tactical use, and EDC (Everyday Carry)

Production Type: Limited edition, industrial production with artisanal finishes

Country of Origin: Germany

Blade: D2 steel with Rockwell hardness of 60-61 HRC

Blade Finish: Dual finish with polished bevels and cross-satin surface

Handle: Micarta scales secured with Torx screws

Blade Length: 85 mm

Blade Thickness: 6 mm

Overall Length: 185 mm

Weight: 170 g

Packaging: Collector's pouch with embroidered Pohl Force logo, hand-signed certificate of authenticity, exclusive velcro patch, Wilson Tactical lanyard in matching colors

Notes: Includes a Kydex® sheath by Höppner & Schumann, compatible with Tek-Lok adapter for horizontal or vertical carry
AP-HOR-CE

€0.00

Only 0 left

Only 0 left

Out of stock
Rockstead - Shin - Honzukuri rolled ZDP189 & aluminum with ray skin - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Type: 2016 knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from packaging
* Commercial availability: Difficult to find
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and complete, with outer box
* Sheath: -
* Manuals, Certificates, and Warranty: Present and complete
Inspected and Certified by our internal laboratory

SHIN in Japanese means ‘trust’.

The SHIN is one of the largest folders in the Rockstead catalog and showcases all the typical and characteristic elements of the brand: aluminum handle with a pearl-radiant design, hardened anodization at 400 Vickers, and an insert of high-quality stingray leather (Samekawa).

This is a durable knife with strong cutting capabilities that maintains its edge for a long time. Even when used for rigorous cuts, the blade glides securely thanks to its particular sharpening.

The blade indeed has a HONZUKURI sharpening, convex on both sides, following the tradition of Japanese swords; this makes it both very sharp and sturdy, allowing it to cleanly cut a sheet of paper even after 1000 cuts through a very abrasive and resistant hemp rope.

A faithful companion for life, in which to place the utmost trust.

Blade: laminated stainless steel ZDP189 at 67HRC internally and VG10 at 61.7HRC externally
Handle: samekawa (genuine stingray leather) and aerospace-grade aluminum A6063S with black alumite treatment at 400Hv hardness
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 145g.
Lock: linerlock type, made of 402J2 steel at 50HRC
Clip: removable, made of 402J2 steel at 50HRC, with black alumite treatment at 400Hv
Notes: complete with warranty certificate and technical specifications

RO-SHIN-3ZDP-CP

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Prepper One Tactical - 2050 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Condition: In excellent condition, almost new, without accessories (only knife and sheath)
* Available on the market: Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Sheath: Present
* Manuals, Certificates and Guarantees: Absent
* Checked and Certified by our internal laboratory

Intended use: Tactical / Hiking

Type of production: Industrial
Country of production: Italy (by Lion Steel)
Blade: Niolox stainless steel
Surface treatment: Black Stonewash
Handle: G10
Blade length: 118 mm.
Blade thickness: 6 mm.
Total length: 247 mm.
Balance: on the guard branch
Weight: 280 g.
Sheath: in thermoformed Kydex, with Tek-Lok type attachment
Packaging: not present
Notes: Knife out of production, previously purchased, withdrawn from a private collection

PF-2050-CP

€0.00

Only 0 left

Only 0 left

Out of stock
Rockstead - CHI Knife - ZDP189 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: 2011 specimen, overall in very good condition.
* Commercially available: Still in catalog, but difficult to find.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: minimal marks given by time.
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection / Sporting

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: ZDP189 stainless steel at 66.3 HRC
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Specimen number #046 dated 07/13/2011, previously purchased, withdrawn from a private collection

R-CHIZDP-CP

€0.00

Only 0 left

Only 0 left

Out of stock
PDT - Pohl Force - Quebec Two - 2443 - D2 & G10 - PRIVATE COLLECTION by Floriano - knife

Exclusive product created in collaboration with the YouTube channel PDT - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Floriano of the PDT Parchetto del Tagliagole.
* Condition: Overall in very good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Imperceptible signs of concrete use.
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Total Length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6mm
Weight: 380g
Blade material: D2 steel
Blade finish: stonewashed
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard
Packaging: cardboard box, warranty certificate
Notes: knife used in a YouTube video review by Floriano of PDT

PDT-PF2443-CP

€0.00

Only 0 left

Only 0 left

Out of stock
Rockstead - Hizen - YXR7 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In excellent, like-new condition
* Commercially available: Still in production
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection / Sporting

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: Hitachi YXR7 steel at 64 HRC
Blade treatment: Black Hard Anodized at Hv400 hardness
Handle: Duraluminum A7075 with anodized to Hv400 hardness
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thickness when closed: 11.4mm.
Weight: 74g.
Opening: via ambidextrous pin
Washers: steel
Closure: FrameLock with clapper made of SKD11 at 61HRC
Clip: removable, 1mm 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: serial number 338 - Production date 20/03/2019

R-HIZ-YXR7-CP

€0.00

Only 0 left

Only 0 left

Out of stock
Rockstead - Shin Pocket Knife - ZDP189 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: in excellent, like-new condition
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection / Sporting

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: stainless steel ZDP-189 at 66.6 HRC
Blade finish: mirror polish
Handle: Duraluminum A7075 with anodization to Hv400 hardness and Samekawa insert (genuine Breed leather)
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 145g.
Opening: via ambidextrous pivot
Washers: steel
Closure: FrameLock with hinge made of 420J2 at 52HRC
Clip: removable, 1mm 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: serial number 054 - Date of manufacture 23/04/2019

RO-SHIN-ZDP-CP

€0.00

Only 0 left

Only 0 left

Out of stock
Rockstead - Hizen J - YXR7 Black Titanium Coating - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition, some minor abrasion on clip and hardware
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: Small abrasions on clip and hardware.
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection / Sporting

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: Hitachi YXR7 steel at 64.7 HRC
Blade treatment: Black Titanium mirror coat
Handle: Duraluminum A7075 with anodizing to Hv400 hardness
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thickness when closed: 11.4mm.
Weight: 74g.
Opening: via ambidextrous pin
Washers: steel
Closure: FrameLock with clapper made of SKD11 at 61HRC
Clip: removable, 1mm 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: serial number 014 - Production date October 9, 2009

R-HIZ-TI-CP

€0.00

Only 0 left

Only 0 left

Out of stock
Rockstead - HIGO II X-FCF - ZDP-189 & Dark Matter Gold Carbon Fiber - folding knife

Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.

Blade: ZDP-189 stainless steel at 66.7HRC
Handle: anodized titanium and Dark Matter Gold carbon fiber
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 138g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Accompanied by warranty certificate with full technical specifications - Please note that the knife you receive will have a different serial number and production date than the model shown in the photographs.

RO-HIGIIX-ZDPDMG

€1,549.18

Only 0 left

Only 0 left

Out of stock
Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife

With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.

Blade: ZDP189 rolled stainless steel at 66/67 HRC inside and VG10 at 60/61 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications. - Please note that the knife you receive will have a different serial number and production date than the model shown in the photographs.

RO-SHIN-ZDP

€1,270.49

Only 0 left

Only 0 left

Out of stock
Rockstead - Hizen - DLC YXR7 & Duralumin - Folding Knife

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -

RO-HIZ-DLC

€786.89

Only 0 left

Only 0 left

Rating:
100%
5

Out of stock
Rockstead - Hizen - ZDP-189 & Duralumin - Folding Knife made in Japan

Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

RO-HIZ-ZDP189

€0.00

Only 0 left

Only 0 left

Rating:
100%
5

Out of stock
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory

The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

RO-HIMHDLC-CP

€0.00

Only 0 left

Only 0 left

Out of stock
Rockstead - 2010 Higo-ST Serial #005 - YR7 HPC & Duralumin - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.

The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.

Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

RO-HISTHPC-CP

€0.00

Only 0 left

Only 0 left

Out of stock
Conaz Consigli Scarperia - Zuava knife 16 cm raw ox horn 50307 - knife

Intended use: sporting/collection
Type of production: artisan
Blade production: Italy
Blade: Stainless steel X50CrMoV15
Blade treatment: -
Handle: Raw ox horn
Blade length: 70mm.
Blade thickness: 1,6mm.
Length closed: 90mm.
Total length: 160mm.
Weight: 53g.
Closure: without blade lock
Packaging: cardboard box
Sheath: -

Craftsmanship is beautiful because it is varied

The colours of the materials from which the handicrafts are made may vary from those shown in the pictures.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: that's the beauty of fine materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: that's the beauty of fine workmanship. Combine all this and you have a product that is always different and unique. And always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

50307

€49.18

Only 0 left

Only 0 left

Rating:
100%
5

Out of stock
Pohl Force - Bravo Two Classic - FDE Dark Stonewashed ATS-34 - 1079 - knife

To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

The Bravo Two Classic BK is equipped with an FDE (Flat Dark Earth) fibreglass handle and a Tanto blade with a Dark Stonewashed finish.

Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacture

PF-1079FDE

€172.13

Only 0 left

Only 0 left

Out of stock
Pohl Force - Bravo Two Classic - Black Two Tone ATS-34 - 1078 - knife

To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

The Bravo Two Classic BK is equipped with a black fibreglass handle and a Tanto blade with an exciting two-tone finish (stonewashed/satin-finished lengthwise).

Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dual Tone (stonewashed + satin-finished)
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacture

PF-1078BK

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Bravo One Classic - FDE Dark Stonewashed ATS-34 - 1077 - knife

To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

The Bravo One Classic BK features an FDE (Flat Dark Earth) fibreglass handle and a Drop point blade with a Dark Stonewashed finish.

Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacture

PF-1077FDE

€172.13

Only 0 left

Only 0 left

Out of stock
Pohl Force - Bravo One Classic - Black Two Tone ATS-34 - 1076 - knife

To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

The Bravo One Classic BK is equipped with a black fibreglass handle and a drop point blade with an exciting two-tone finish (stonewashed/longitudinal satin finish).

Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dual Tone (stonewashed + satin-finished)
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacture

PF-1076BK

€0.00

Only 0 left

Only 0 left

Out of stock
Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan

Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.

Intended Use: Collection/Sportsman

Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpening - Please note that the knife you receive will have a different serial number and production date than the model shown in the photographs.

R-CHIZDP

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Quebec Two Black TiNi - Limited Signature Edition - 2444S - knife

Pohl Force's Quebec series is a classic mission knife that has been at the top of founder and designer Dietmar Pohl's wish list for many decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation.

Developed as the Ground Forces Combat & General Purpose Weapon, the multi-purpose knife was designed for the U.S. Marine Corps in the early 1950s. Although it was never officially introduced, it clearly demonstrated its capabilities in the Vietnam War, especially in the hands of American special forces. Almost 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of old-school classic design and modern high-tech production.

Designer Dietmar Pohl has revised the design of the Quebec One and expanded the knife's range of functions. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium, thus significantly improving cut and corrosion resistance. In addition, Dietmar Pohl has once again optimized the blade of the classic. The new version now has a 10 mm longer cutting edge and a secondary edge on the back.

In addition, the Pohl Force Prepper System has been integrated into the handle of the Quebec Two to safely store survival items inside the handle. A tool to open the handle screws is included. Pohl Force's new scabbard system allows for greatly increased use. The highly elaborate sheath, made of 2.5-mm-thick Kydex, with belt adapter and leg strap, allows for high carrying comfort. To attach it to the hand, the Quebec Two is equipped with a lanyard.

Total length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6 mm
Weight: 380g
Blade material: D2 steel
Blade finish: titanium nitriding
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard

Packaging: Cardboard box, warranty certificate
Notes: Each knife is numbered and individually signed by DIetmar Pohl on the Kydex sheath

PF2444S

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Quebec Two Stonewashed - Limited Signature Edition - 2443S - knife

Pohl Force's Quebec series is a classic mission knife that has been at the top of founder and designer Dietmar Pohl's wish list for many decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation.

Developed as the Ground Forces Combat & General Purpose Weapon, the multi-purpose knife was designed for the U.S. Marine Corps in the early 1950s. Although it was never officially introduced, it clearly demonstrated its capabilities in the Vietnam War, especially in the hands of American special forces. Almost 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of old-school classic design and modern high-tech production.

Designer Dietmar Pohl has revised the design of the Quebec One and expanded the knife's range of functions. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium, thus significantly improving cut and corrosion resistance. In addition, Dietmar Pohl has once again optimized the blade of the classic. The new version now has a 10 mm longer cutting edge and a secondary edge on the back.

In addition, the Pohl Force Prepper System has been integrated into the handle of the Quebec Two to safely store survival items inside the handle. A tool to open the handle screws is included. Pohl Force's new scabbard system allows for greatly increased use. The highly elaborate sheath, made of 2.5-mm-thick Kydex, with belt adapter and leg strap, allows for high carrying comfort. To attach it to the hand, the Quebec Two is equipped with a lanyard.

Total length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6 mm
Weight: 380g
Blade material: D2 steel
Blade finish: stonewashed
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard

Packaging: Cardboard box, warranty certificate
Notes: Each knife is numbered and individually signed by DIetmar Pohl on the Kydex sheath

PF2443S

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Charlie Two SW - D2 steel - 6001 - knife

With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Two covers a wide range of applications.

The modern Spear Point blade and handle of the Charlie Two are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.

Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip.

The Charlie Two comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

Intended Use: Tactical/Sporting

Blade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: made of kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

PF-6001

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Charlie Three SW - D2 steel - 6011 - knife

With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Three covers a wide range of applications.

The modern Spear Point blade and handle of the Charlie Three are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.

Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip.

The Charlie Three BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

Intended Use: Tactical/Sporting

Blade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

PF-6011

€159.84

Only 0 left

Only 0 left

Out of stock
Pohl Force - Charlie Two BK TiNi - D2 steel - 6002 - knife

With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Two covers a wide range of applications.

The modern Spear Point blade and handle of the Charlie Two are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The surface of the handle and blade is coated with a black titanium nitriding.

Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip.

The Charlie Two BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

Intended Use: Tactical/Sporting

Blade: Full tang made of D2 steel at 59/60HRC with TiNi coating
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

PF-6002

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Charlie Three BK TiNi - D2 steel - 6012 - knife

With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Three covers a wide range of applications.

The modern Spear Point blade and handle of the Charlie Three are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The surface of the handle and blade is coated with a black titanium nitriding.

Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip.

The Charlie Three BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

Intended Use: Tactical/Sporting

Blade: Full tang made of D2 steel at 59/60HRC with TiNi coating
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

PF-6012

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Compact Two BK TiNi - D2 steel - 6032 - knife

With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The surface of the blade has a tactical, non-reflective TiNi titanium nitriding coating that provides excellent protection against external corrosives.

The reduced handle design is the basis for the knife's very compact size. The pleasantly rounded tang and cleverly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

The Compact TWO BK is equipped with a robust, high-quality Kydex sheath in black. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

Intended use: Tactical / Sporting

Blade: Full tang in D2 steel at 59/60HRC with TiNi coating
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.

PF-6032

€139.34

Only 0 left

Only 0 left

Out of stock
Pohl Force - Compact Two SW - D2 steel - 6031 - knife

With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.

The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

The Compact Two SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

Intended use: Tactical / Sporting

Blade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.

PF-6031

€135.25

Only 0 left

Only 0 left

Rating:
93%
4.7

Out of stock
Pohl Force - Compact One BK TiNi - D2 steel - 6022 - knife

With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

The focus is on the massive, classic Bowie blade of the Compact One, which is 88 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The surface of the blade has a tactical, non-reflective TiNi titanium nitriding coating that provides excellent protection against external corrosives.

The reduced handle design is the basis for the knife's very compact size. The pleasantly rounded tang and cleverly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

The Compact One BK is equipped with a robust, high-quality Kydex sheath in black. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

Intended use: Tactical / Sporting

Blade: Full tang in D2 steel at 59/60HRC with TiNi coating
Handle: In G-10
Blade length: 88mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.

PF-6022

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Compact One SW - D2 steel - 6021 - knife

With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

The focus is on the massive, classic Bowie blade of the Compact One, which is 88 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.

The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

The Compact One SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

Intended use: Tactical / Sporting

Blade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 88mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.

PF-6021

€135.25

Only 0 left

Only 0 left

Rating:
100%
5

Out of stock
Pohl Force - Tactical Nine BK knife - D2 steel - 5015 - knife

Based on the well-known MK-9, designer Dietmar Pohl has developed the new Tactical Nine. Reduced in weight and more compact in size, the Tactical Nine Black is still a full-fledged knife.

The sturdy 20cm long and 6mm thick spear point blade is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. The step-shaped grip design offers an excellent and secure grip. For powerful or delicate work, the pronounced and also rounded finger recess in front of the guard allows the knife to lean forward. A hidden hole in the end of the handle offers the possibility to mount a lanyard (included).

The Kydex sheath of the Tactical Nine Black has a material thickness of 2.5mm which provides the basis for a well thought out and durable carrying system which fully meets the high demands placed in practice on a tactical knife. A leg strap, infinitely adjustable in size, with snap closure allows it to be fixed to the thigh of the wearer.

Intended use: Collection / Sports

Blade: Full tang in D2 steel at 59 / 60HRC
Handle: In G-10
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 345mm.
Weight: 482g.
Sheath: in kydex
Packaging: 3D certified numbered patch

PF-5015

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Tactical Eight BK knife - D2 steel - 5014 - knife

Based on the well-known MK-8, designer Dietmar Pohl has developed the new Tactical Eight Black. Reduced in weight and more compact in size, the Tactical Eight Black is still a knife in all respects, versatile for professional users.

The sturdy Bowie blade over 17cm long and 6mm thick is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. A hidden hole at the end of the grip offers the possibility to mount a lanyard (included).

The Kydex® sheath of the Tactical Eight Black with a material thickness of 2.5 millimeters provides the basis for a well thought-out and durable carrying system that fully meets the high demands placed on a tactical knife in practice.

Intended use: Collection / Sports

Blade: Full tang in D2 steel at 59 / 60HRC
Handle: In G-10
Blade length: 174mm.
Blade thickness: 6mm.
Total length: 315mm.
Weight: 375g.
Sheath: in kydex
Packaging: box with numbered certificate

PF-5014

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Tactical Eight SW knife - D2 steel - knife

Based on the well-known MK-8, designer Dietmar Pohl has developed the new Tactical Eight. Reduced in weight and more compact in size, the Tactical Eight is still a knife in all respects, versatile for professional users.

The sturdy 17.4cm long and 6mm thick Bowie blade is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. A hidden hole at the end of the grip offers the possibility to mount a lanyard (included).

The Kydex® sheath of the Tactical Eight with a material thickness of 2.5mm provides the basis for a well thought-out and durable carrying system that fully meets the high demands placed on a tactical knife in practice.

Intended use: Collection / Sports

Blade: Full tang in D2 steel at 59 / 60HRC
Handle: In G-10
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 315mm.
Weight: 375g.
Sheath: in kydex
Packaging: box with numbered certificate

PF-5004

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Tactical Nine SW knife - D2 steel - knife

Basato sul noto MK-9, il designer Dietmar Pohl ha sviluppato il nuovo Tactical Nine. Ridotto nel peso e più compatto nelle dimensioni, il Tactical Nine è comunque un coltello a tutti gli effetti.

La robusta lama spear point lunga 20 centimetri e spessa 6 millimetri è adatta per un'ampia gamma di applicazioni. Per un'elevata ritenzione del filo e resilienza della lama, la scelta è ricaduta sul noto acciaio per utensili D2.

La finitura stonewashed crea una superficie antigraffio e aumenta anche la resistenza della lama alla corrosione. Il design delle guancette a forma di gradino offorno una presa eccellente e sicura. Per lavori potenti o delicati, l'incavo delle dita pronunciato e anche arrotondato davanti alla protezione consente al coltello di protendersi in avanti. Un foro nascosto all'estremità della maniglia offre la possibilità di montare un cordino (incluso).

Il fodero in Kydex del Tactical Nine ha uno spessore del materiale di 2,5 millimetri che fornisce la base per un sistema di trasporto ben congegnato e resistente e che soddisfa pienamente le elevate esigenze poste in pratica su un coltello tattico. Un cosciale, regolabile all'infinito nelle dimensioni, con chiusura a scatto consente di fissarlo alla coscia di chi lo indossa.

Destinazione d'uso: Collezione/Sportivo

Lama: Full tang in acciaio D2 a 59/60HRC
Impugnatura: In G-10
Lunghezza lama: 200mm.
Spessore lama: 6mm.
Lunghezza totale: 345mm.
Peso: 482g.
Fodero: in kydex
Confezione: Patch 3D certificato numerato

PF-5005

€0.00

Only 0 left

Only 0 left

Out of stock
Mac Coltellerie - San Marco Fighting Knife D2 - knife

Intended use: Military / Tactical / Collection

Type of production: industrial
Blade: 60-61HRC D2 Tool Steel
Blade treatment: Black Idroglider
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Design by Sandro Martinelli and Marco Bellani

MAC-SM-D2

€143.44

Only 0 left

Only 0 left

Rating:
98%
4.9

Out of stock
Pohl Force - Kaila Two Black - Neck Knife - Limited Edition - 2064 - knife

Intended use: EDC / Light Utility / Neck Knife

Type of production: Industrial
Country of production: Italy (Lion Steel - Maniago)
Blade: Niolox stainless steel
Surface treatment: Blackwash
Handle: Niolox stainless steel
Blade length: 60mm.
Blade thickness: 3.5mm.
Total length: 134mm.
Balancing: set back
Weight: 68g.
Sheath: Kydex thermoformed with neck strap
Packaging: cardboard box with Pohl Force logos, Nylon Pouch with zip, PVC Patch, warranty certificate with knife serial number.
Notes: Design by Kaila Cumings - Limited and numbered edition in only 300 copies - Each knife is serialized and numbered on blade, box and certificate.

PF2064

€0.00

Only 0 left

Only 0 left

Out of stock
Rockstead - Shin knife DLC - YXR7 - knife

This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.

Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.

RS-SHIN-B

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Alpha Four Knife - Outdoor Version - 1059 - knife

Intended use: Sports / Tactical

Type of production: Industrial
Blade: CTS-BD1 stainless steel
Blade treatment: micro-shot blasting
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Total length: 260mm.
Thick when closed: 18mm
Balancing: set back by 1cm from the guard branch
Weight: 270g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: cardboard box with Pohl Force logos - numbered guarantee certificate - sticker with Pohl Force logos - PVC patch with velcro
Notes: Peg for opening with a single hand, which can be disassembled / assembled according to your preferences

PF-1059

€0.00

Only 0 left

Only 0 left

Rating:
93%
4.7

Out of stock
Rockstead - Higo II X-CF-ZDP - Carbon Fiber ZDP-189 - knife

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Please note that the knife you receive will have a different serial number and production date than the model shown in the photographs.

HIGOIIXCF

€1,454.92

Only 0 left

Only 0 left

Out of stock
Rockstead - Chou HPC - Black Silk - neck knife

With the Rockstead brand, of Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently being marketed.

Created by Katsumi Kitano, who has been producing quality knives for over 20 years, to the extent that they have been awarded the highest recognition among the artisanal cutlers in Japan, they prove to be exceptional both in cutting, penetration and thread strength and in terms of innovation for the materials used and for construction techniques.

Blade: Hitachi YXR7 65HRC steel with HPC titanium cover
Handle: interweaving in silk tied by hand
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: neck, in Kydex
Notes: Accompanied by silk bag and certificate of guarantee with technical specifications.

4069BLACK

€0.00

Only 0 left

Only 0 left

Out of stock
Mac Coltellerie - Survival knife XJ24 - knife

Intended use: outdoor / survival

Type of production: industrial
Blade: 420 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 240mm.
Blade thickness: 4.7mm.
Total length: 375mm.
Weight: 460g. (626g. With scabbard)
sheath: in leather
Note:

XJ24

€65.57

Only 0 left

Only 0 left

Rating:
47%
2.4

Out of stock
Rockstead - TEI DLC - 65hrc - knife collection

This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.

Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: Folder

RO-TEI

€0.00

Only 0 left

Only 0 left

Rating:
100%
5

Out of stock
Rockstead - Chou HPC Ironwood - Neck Knife - Knife

With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.

Use: utility / Neck Knife

Production Country: Japan
Blade: stainless Hitachi YXR7 to 65HRC
Finish: HPC titanium
Handle: Ironwood
Blade length: 45 mm.
Blade thickness: 4 mm.
Overall length: 120 mm.
Weight: 60 g.
Sheath: neck, Kydex thermoformed
Notes: Accompanied by a certificate of guarantee with technical specifications

4069IW

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Mike Five - Rosewood Santos - 1063 - Knife

Intended use: Sports

Type of production: Industrial
Production Country: Italy
Blade: stainless Niolox
Blade treatment: Satin finish
Handle: Rosewood Wood Santos with stainless steel liners
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 125mm.
Overall length: 220mm.
Thick when closed: 15mm.
Balancing: -
Weight: 185g.
Lock: Back Lock
Clip: Removable and reversiile, stainless steel
Sheath: -
Packaging: Cardboard box with nylon zip bag, lanyard, patches PVC and velcro, guarantee certificates
Notes: Made in Italy by LionSteel of Maniago (PN)

PF-1063

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Alpha Four - Desert Tactical Limited Edition - 1061 - knife

Intended use: Tactical collection
Type of production: Industrial
Blade: D2 steel
Blade treatment: Satin finish
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: 1cm back from the guard branch
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Pohl Force logos - numbered certificate of guarantee - Cordura sheath - sticker with Pohl Force logos
Notes: Limited edition of just 600 numbered copies - Package Inside there is a small peg to mount on the back of the blade to make the opening knife with one hand

PF-1060

€0.00

Only 0 left

Only 0 left

Rating:
93%
4.7

Out of stock
Pohl Force - Alpha Four - Desert Tactical Limited Edition - 1061 - knife

Intended use: Tactical collection
Type of production: Industrial
Blade: D2 steel
Blade treatment: Satin finish
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: 1cm back from the guard branch
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Pohl Force logos - numbered certificate of guarantee - Cordura sheath - sticker with Pohl Force logos
Notes: Limited edition of just 600 numbered copies - Package Inside there is a small peg to mount on the back of the blade to make the opening knife with one hand

PF-1061

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Bravo One Gen3 - Survival 1050 - knife

Third generation of the successful model of Pohl Force Bravo, now with steel CTS-BD1, blade slightly thicker design of the grips and renovated to offer better grip during use.

Intended use: tactical, sports
Type of production: Industrial
Blade: Stainless steel CTS-BD1 59 / 61HRC
Blade treatment: -
Handle: Zytel
Blade length: 83mm.
Blade thickness: 3.5mm.
Overall length: 195mm.
Thick when closed: 16mm
Balancing: -
Weight: 120g.
Closure: Back Lock
Pouch: Cordura, with zip
Packaging: cardboard box with logos Pohl Force, patches PVC and Velcro logo Pohl Force
Notes: -

PF1050

€0.00

Only 0 left

Only 0 left

Rating:
93%
4.7

Out of stock
Pohl Force - Bravo One Gen3 - Outdoor 1049 - knife

Third generation of the successful model of Pohl Force Bravo, now with steel CTS-BD1, blade slightly thicker design of the grips and renovated to offer better grip during use.

Intended use: tactical, sports
Type of production: Industrial
Blade: Stainless steel CTS-BD1 59 / 61HRC
Blade treatment: -
Handle: Zytel
Blade length: 83mm.
Blade thickness: 3.5mm.
Overall length: 195mm.
Thick when closed: 16mm
Balancing: -
Weight: 120g.
Closure: Back Lock
Pouch: Cordura, with zip
Packaging: cardboard box with logos Pohl Force, patches PVC and Velcro logo Pohl Force
Notes: -

PF-1049

€0.00

Only 0 left

Only 0 left

Out of stock
Pohl Force - Kaila Neck Knife One - Limited Black Edition - 2054 - Knife

Intended use: EDC / Light Utility

Type of production: Industrial
Country of production: Italy (Lion Steel - Maniago)
Blade: stainless steel Niolox
Surface treatment: black
Handle: -
Blade length: 60mm.
Blade thickness: 3mm.
Overall length: 122mm.
Balancing: backward
Weight: 54g.
Sheath: Kydex thermoformed with drawstring neck
Packaging: cardboard box with Pohl Force logos, PVC Patch, warranty card, autographed photograph from Kaila Cumings with the number of knife series.
Notes: Design by Kaila Cumings - Numbered edition limited to only 300 pcs - Each knife is serialized and numbered on the blade, box, and warranty certificate.

PF2054

€0.00

Only 0 left

Only 0 left

Out of stock

Sports, Outdoor, Tactical, and Collectible Knives: The Collini Selection

For over 50 years, Coltelleria Collini has been a reference point in Italy for the world of specialized cutlery. Since 1968, we have been selecting sports, outdoor, professional, and collectible knives, collaborating exclusively with official brands, historical manufacturers, and master artisans.

In this category, you will find thousands of original knives, chosen for demanding collectors, EDC, outdoor, and bushcraft enthusiasts, as well as professional operators who require reliability, quality materials, and consistent performance over time.

Military & Tactical Knives

Knives designed for heavy-duty and professional use, where robustness and reliability are paramount. We select world-leading brands such as Extrema Ratio, Zero Tolerance, Ka-Bar, and Cold Steel. Fixed and folding blades developed to withstand extreme conditions.

Sports & Outdoor Knives

From trekking to hiking, from bushcraft to everyday carry (EDC). Discover the Italian excellence of Fox Knives and LionSteel, the Nordic solidity of Fallkniven, and great classics like Opinel and Spyderco.

Collectible & Rare Knives

Custom, vintage, limited edition, and discontinued knives. Through our Approved program, we acquire, evaluate, and certify private collections, offering our customers access to rare, display, and investment-grade blades.

Why choose Coltelleria Collini since 1968

We are not just an e-commerce site, but a historic cutlery shop with direct experience on the products we offer. Buying from us guarantees:

Certified Originality: we are official dealers for all brands we carry.
Real Stock with fast shipping.
Qualified Assistance and technical advice before and after sales.

Want to know more? Download the Knives Catalog for free (PDF)

Knives FAQ

What is the best knife brand?

There is no absolute "best" brand, but specific leaders for each use. For tactical and professional use, Extrema Ratio and Zero Tolerance are top tier. For outdoor and EDC, Fox, LionSteel, Fallkniven, and Spyderco excel.

Is it legal to buy sports knives online?

Yes, buying sports and collectible knives online is generally legal for adults. However, laws regarding carrying and transporting knives in public vary significantly by country. Always check your local regulations.

The brands dealt with by Coltelleria Collini