Last up date
-
Work Sharp - WSBCHPAJ-ELT - 15°/ 30° Precision Adjust Knife Sharpener Elite with Diamond and Ceramic - Manual Sharpener
Based on the best-selling Precision Adjust knife sharpener, the Precision Adjust ELITE is an angle-adjustable knife sharpening system with seven abrasive grits that offers precision and repeatability for sharpening enthusiasts who want the best in hand sharpening.
Sharpening angles can be adjusted from 15° to 30° in 1° increments to suit a wide range of kitchen, outdoor and EDC knives. Supplied with diamond grit plates and a fine ceramic for repairing, sharpening and polishing to an incredibly sharp edge. Then the leather quill refines and polishes the edge for even more extraordinary results. The included ceramic rod sharpens serrations.
Innovative V-Block clamp design locks the knife quickly and securely during sharpening. Tri-Brasive® case and holder keep abrasives and sharpener neat and ready to use wherever your adventure takes you.
From repair work to reprofiling your favorite EDC to mirror polishing any blade, this sharpener offers the ultimate in performance.
- It includes the Precision Adjust sharpener and upgrade kit in one package.
- Sharpener with rod and clamp designed for ease and safety.
- 15° to 30° angle guides
- Includes 220, 320, 400, 600, and 800 grit diamond plates, ceramic plates, leather clamp, and ceramic rod for sawing.WS-WSBCHPAJ-ELT -
Work Sharp - WSGSS-G - 17°/ 20° Diamond and Ceramic Guided Sharpener System - Manual Sharpener
The Guided Sharpening System is our complete bench sharpening and honing system. It was created with both beginners and master sharpeners in mind and can be used to sharpen all knives in your possession.
The innovative Pivot-Response system follows the curvature of the blade during sharpening to give you an accurate edge along the entire length of the blade. You don't need to acquire skill with this tool because the skill is already built into the tool, making sharpening fun and easy to learn thanks to the 17° and 20° angle guides. The Guided Sharpening System with Angle Guides can be used separately and carried with you in the field, so you can keep sharpening away from the workbench.
Use the Guided Sharpening System to perfectly sharpen your pocket, hunting and kitchen knives as well as serrated blades, fish hooks and a variety of tools quickly and easily.
- Sturdy plastic and stainless steel construction
- Coarse diamond stone with grit #320 and guided angle of 17° or 20°
- Fine diamond stone with grit #600 and guided angle of 17° or 20°
- 3-position ceramic sharpener (roughing, polishing and fish hooks) with 20° guided angle
- Small ceramic sharpener for serrated bladesWS-WSGSS-G -
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP -
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY -
Work Sharp - WSGFS - 20° Guided Field Diamond and Ceramic Sharpener - Manual Sharpener
Guided field sharpener is a complete solution for sharpening in the field or at home
Designed exclusively for sportsmen and knife users who need a complete, robust and compact manual sharpening solution.
Incorporates 5 sharpening and honing stages, each with built-in angle guides to achieve uniform sharpening across the blade. The 20° guides, 320 and 600 grit diamond, fine ceramic rods, and 25° leather stropping combine to provide a one-stop solution from repair to creating a well-sharpened and polished knife.
The Guided Field Sharpener also sharpens serrations and fish hooks, and the removable, magnetically attached diamond plates reveal a cavity for storing additional tools useful to you.
- Sturdy plastic construction with non-slip rubber inserts
- Coarse diamond stone with #320 grit and 20° guided angle
- Fine diamond stone with #600 grit and 20° guided angle
- Ceramic sharpener with 3 positions (roughing, polishing and fish hooks) with 20° guided angle
- Leather part for stropping and polishing to blades, with 25° guided angle
- Small ceramic sharpener for serrated blades
- Hole for lanyard or stringWS-WSGFS -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2 -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB