Last up date
-
Hobbit - Penna a forma di chiave di Erebor e segnalibri di Thorin Scudodiquercia - Il Signore Degli Anelli
Penna a forma di chiave di Thorin tratta dal film The Hobbit con Segnalibro lenticolare 3D
Prodotto ufficiale
Thorin II, soprannominato Scudodiquercia (Oakenshield) un personaggio di Arda, l'universo immaginario fantasy creato dallo scrittore inglese J.R.R. Tolkien e compare ne Lo Hobbit e ha una presenza minore anche ne Il Signore degli Anelli.
il figlio di Thrin II e nipote di Re Thrr, oltre che il capo della compagnia di nani, a cui si unisce anche lo hobbit Bilbo Baggins, che riconquist la Montagna Solitaria da Smaug il drago, dopo una lunga missione.
Personaggio austero, invadente, molto orgoglioso e altero rispetto ai suoi consanguinei che lo accompagnano nella missione[2], Thorin rispecchia perfettamente le caratteristiche dei membri della sua razza, soprattutto per quanto riguarda la necessit di difendere e di riconquistare il proprio tesoro e, in particolare, l'Archepietra, la pi grande gemma mai scoperta nella Montagna Solitaria.NC-03 -
The Hobbit - Ciondolo Thorin Scudodiquercia - Lo Hobbit - collana
Ciondolo ufficiale di Thorin Oakenshield in argento.
Thorin II, soprannominato Scudodiquercia (Oakenshield) un personaggio di Arda, l'universo immaginario fantasy creato dallo scrittore inglese J.R.R. Tolkien e compare ne Lo Hobbit e ha una presenza minore anche ne Il Signore degli Anelli.
il figlio di Thrin II e nipote di Re Thrr, oltre che il capo della compagnia di nani, a cui si unisce anche lo hobbit Bilbo Baggins, che riconquist la Montagna Solitaria da Smaug il drago, dopo una lunga missione.
Personaggio austero, invadente, molto orgoglioso e altero rispetto ai suoi consanguinei che lo accompagnano nella missione, Thorin rispecchia perfettamente le caratteristiche dei membri della sua razza, soprattutto per quanto riguarda la necessit di difendere e di riconquistare il proprio tesoro e, in particolare, l'Archepietra, la pi grande gemma mai scoperta nella Montagna Solitaria.NC-13 -
The Hobbit - Miniatura Spada di Thorin Scudodiquercia - apri lettere NN1207 - prodotto ufficiale
The Hobbit - Riproduzione in scala 1:3 della spada di Thorin Oakenshield utilizzata nel film "The Hobbit"
Lama: Acciaio Inossidabile 420J2
Supporto: confezione in legno
Lunghezza spada: 19 cm.
Prodotto accompagnato dalla licenza ufficiale "Lord of the Rings" della New Line CinemaNC-07 -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
The Hobbit - Miniature of the sword of Thorin - open letters - NN1204 - official product
The Hobbit - Miniature of the sword of Thorin - open letters - NN1204 - official product
The Hobbit - Playing in a 1: 3 of the sword of Thorin from "The Hobbit"
Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 20 cm.Officially licensed product accompanied by "The Hobbit" for New Line Cinema
NN1204 -
The Hobbit - Miniature Sword Thranduil - open letters - NN1224 - official product
The Hobbit - Miniature Sword Thranduil - open letters - NN1224 - official product
The Hobbit - Playing in a 1: 3 Sword of Thranduil from "The Hobbit"
Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 21 cm.Officially licensed product accompanied by "The Hobbit" for New Line Cinema
NN1224 -
The Hobbit - Miniature dagger Tauriel - open letters - NN1213 - official product
The Hobbit - Miniature dagger Tauriel - open letters - NN1213 - official product
Lord of the Rings - Playing in a 1: 3 of the dagger of Tauriel from "The Hobbit"
Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 20 cm.Officially licensed product accompanied by "Lord of the Rings" in New Line Cinema
NN1213 -
The Hobbit - Dwarven Treasure Coin Set - coins dwarven NN6087 - The Hobbit
The Hobbit - Dwarven Treasure Coin Set - coins dwarven NN6087 - The Hobbit
Erebor is a dwarven city of enormous size, located in the mountains east of Mirkwood, which sees inside tall chambers filled with gold. The city was governed by an endless line of kings, including Thrain and Thorin, and for some years it was occupied by the ruthless dragon Smaug. It was also the capital of the United flourishing under the Mountain.
container wood
- Measures 26.5 x 8.5 x 2.2 cmmetal coins
- 5 dwarven coins of different sizesOfficially Licensed!
NN6087 -
Sergio Consoli - N°098 Folding Walnut - Custom Knife
Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli9015€729.51Out of stock -
The Hobbit - Ciondolo di Galadriel - collana ufficiale
Riproduzione ufficiale della collana di Galadriel, dietro concessione della "New Line Cinema"
Realizzato in argento
Certificato di autenticit New line Cinema
Dama Galadriel un personaggio immaginario dei romanzi fantasy di J.R.R. Tolkien. Era una nobile elfa della Terra di Mezzo, che regn insieme a Sire Celeborn sul reame di Lrien. Spesso viene citata come La Dama di Lrien o La Dama dei Galadhrim. Al di fuori del reame di Lothlrien, tuttavia ci si riferisce semplicemente chiamandola Dama Galadriel o La Dama. Lei e Celeborn divennero noti come Il Signore e la Dama. Galadriel non fu mai regina, sebbene fosse di sangue reale.
Il suo nome paterno era Artanis ("nobile donna") e quello materno Nerwen ("ragazza-uomo"), in riferimento alla sua notevole altezza e alla sua forza sia corporea che interiore. Ma il nome che prefer fra tutti fu quello di Galadriel, versione Sindarin del Telerin Quenya Alatriel, "essendo il pi bello dei suoi nomi, quello che le era stato dato dal suo innamorato, Celeborn dei Teleri, che pi tardi spos nel Beleriand", che significa "donna coronata con una ghirlanda di luce brillante", in riferimento ai suoi capelli. Gli Elfi di Tirion ritenevano che nei capelli di Galadriel fosse rimasta imprigionata la luce dei Due Alberi di Valinor, Laurelin e Telperion. Fu molto ammirata da Fanor e forse ne fu fonte d'ispirazione per la creazione dei Silmaril.NC-10 -
The Hobbit - Ciondolo di Galadriel a Fiore - collana ufficiale
Riproduzione ufficiale della collana di Galadriel, dietro concessione della "New Line Cinema"
Realizzato in argento
Certificato di autenticit New line Cinema
Dama Galadriel un personaggio immaginario dei romanzi fantasy di J.R.R. Tolkien. Era una nobile elfa della Terra di Mezzo, che regn insieme a Sire Celeborn sul reame di Lrien. Spesso viene citata come La Dama di Lrien o La Dama dei Galadhrim. Al di fuori del reame di Lothlrien, tuttavia ci si riferisce semplicemente chiamandola Dama Galadriel o La Dama. Lei e Celeborn divennero noti come Il Signore e la Dama. Galadriel non fu mai regina, sebbene fosse di sangue reale.
Il suo nome paterno era Artanis ("nobile donna") e quello materno Nerwen ("ragazza-uomo"), in riferimento alla sua notevole altezza e alla sua forza sia corporea che interiore. Ma il nome che prefer fra tutti fu quello di Galadriel, versione Sindarin del Telerin Quenya Alatriel, "essendo il pi bello dei suoi nomi, quello che le era stato dato dal suo innamorato, Celeborn dei Teleri, che pi tardi spos nel Beleriand", che significa "donna coronata con una ghirlanda di luce brillante", in riferimento ai suoi capelli. Gli Elfi di Tirion ritenevano che nei capelli di Galadriel fosse rimasta imprigionata la luce dei Due Alberi di Valinor, Laurelin e Telperion. Fu molto ammirata da Fanor e forse ne fu fonte d'ispirazione per la creazione dei Silmaril.NC-12