Knife - Essential Tool for Camping, Outdoor Adventure and collection

Specific knife for cutting bread. Thanks to the presence of the indentation on the edge of the blade, the cut remains more durable even in contact with the usually very hard bread crust (on which a normal knife would lose the edge almost immediately).

Forged series
- 23 cm blade

Handles: made of synthetic material and joined with a triple riveting ensure a perfect seal, excellent stability and guarantee dishwasher safe.
The blades: are obtained using the best steels and combining the most qualified elements (chromium 15% - carbon 0.5% - molybdenum - vanadium).
The realization of a WUSTHOF forged knife requires the passage of about 40 processing cycles.

Maintenance

Proper maintenance prolongs the life of the knife, makes work easier and safer and reduces the consumption of the wire. Some advices:

- Pay attention that the knives placed in the dishwasher bump other objects; the blades could be damaged.

- Knives guaranteed for dishwashers that are not immediately washed in the machine should be rinsed under the water tap to remove the remains of highly corrosive foods (fats, vinegar, fruit juices).

- Make sure if the knives no longer cut perfectly, have them rectified or sharpened by professionals in the sector.

The WUSTHOF knives sold by us are personally checked and further sharpened, in order to guarantee you the certainty of an excellent purchase.

Recommended use: Offset bread knife for home and professional use; ideal for crusty bread, baguettes, stuffed sandwiches, cakes, and baked goods
Manufacturing type: Forged from a single piece of steel
Country of manufacture: Germany, Solingen
Blade: High-carbon WÜSTHOF X50CrMoV15 special stainless steel, 58 HRC hardness, serrated edge
Blade finish: Wide, serrated blade with offset profile, satin finish; PEtec sharpening with approx. 12° angle
Handle: Ergonomic black POM (polyoxymethylene), triple riveted, full tang, offset Classic design
Blade length: 200 mm
Total length: approx. 325 mm
Weight: approx. 173 g
Packaging: Original WÜSTHOF Classic box, also suitable as a gift box
Notes: Forged Classic series with 58 HRC WÜSTHOF steel; offset serrated blade offers better knuckle clearance and comfort when slicing bread and pastries; PEtec laser-assisted sharpening; hand wash recommended, dishwasher not advised

Recommended use: Multipurpose kitchen knife for advanced home and professional use; ideal for slicing meat, cold cuts, tender vegetables, fruit, and carving small roasts
Manufacturing type: Forged from a single piece of steel
Country of manufacture: Germany, Solingen
Blade: High-carbon WÜSTHOF X50CrMoV15 special stainless steel, 58 HRC hardness
Blade finish: Plain edge with PEtec sharpening and satin finish
Handle: Ergonomic black POM (polyoxymethylene), triple-riveted, full tang, Classic series
Blade length: 180 mm (nominal); actual approx. 176–178 mm
Blade thickness: approx. 2.5 mm
Total length: approx. 301 mm
Weight: approx. 120 g
Packaging: Original WÜSTHOF Classic box, suitable also as a gift
Notes: Forged Classic series, PEtec laser-assisted sharpening, X50CrMoV15 steel at 58 HRC; ideal as an all-round knife between chef’s and paring knives; hand wash recommended, dishwasher not advised

Recommended use: Wide-blade chef’s knife for professional and advanced home use; ideal for chopping, mincing, and slicing meat, fish, vegetables, and herbs in large volumes
Manufacturing type: Forged from a single piece of steel
Country of manufacture: Germany, Solingen
Blade: Special high-carbon stainless steel WÜSTHOF X50CrMoV15, approx. 58 HRC hardness
Blade finish: Plain edge with PEtec sharpening, satin finish
Handle: Ergonomic black POM (polyoxymethylene) handle, triple-riveted, full tang, Classic series
Blade length: 260 mm
Blade thickness: 3 mm
Closed length: 2.5 mm
Total length: approx. 389 mm
Weight: 309 g
Packaging: Original WÜSTHOF Classic box, suitable also as gift packaging
Notes: Forged Classic series, PEtec laser-assisted sharpening, extra-tall blade for better stability and knuckle clearance; hand wash recommended, dishwasher not advised

Recommended use: Versatile kitchen knife for home or professional use; ideal for tender vegetables, fruits, cold cuts, small meat cuts, and medium prep work
Manufacturing type: Forged from a single piece of steel
Country of manufacture: Germany, Solingen
Blade: High-carbon WÜSTHOF X50CrMoV15 stainless steel, hardness 58 HRC
Blade finish: Plain edge, PEtec sharpening, satin finish
Handle: Black POM (polyoxymethylene), triple-riveted, full tang, ergonomic Classic design
Blade length: 160 mm
Blade thickness: 2.5 mm
Total length: approx. 268 mm
Weight: approx. 91 g
Packaging: Original WÜSTHOF Classic box, also suitable as a gift box
Notes: Laser-assisted PEtec sharpening, 58 HRC hardness, made in Solingen; hand washing recommended, not dishwasher safe

The 632 CB-1 model with crossbar system is the brand's first knife made with this locking mechanism, designed and developed to further expand the product range.

A MagnaCut steel blade with futuristic lines has been designed for this new model, with a drop point profile that allows for different opening modes: via the pivot and hole on the blade, crossbar, flipper, or with a flick of the wrist.

The stonewashed finish of the blade perfectly matches the handles, available in Micarta or G10, characterized by shapes and designs studied to ensure an optimal balance between grip and ergonomics. The reversible pocket clip ensures comfort and versatility, making it suitable for both left- and right-handed users.

The 632 CB-1 with crossbar system is a state-of-the-art folding knife, designed to offer safety, performance, and reliability in every situation.

Intended use: Sports

Country of manufacture: Italy
Total length: 193mm
Blade length: 80mm
Blade thickness: 3.2mm
Blade material: CPM-MagnaCut 62HRC steel with stonewashed finish
Handle material: Micarta
Weight: 120g.
Pocket clip: removable and reversible, stainless steel
Screws: stainless steel
Lock type: Crossbar Lock (Axis)
Notes: ball bearing opening system via flipper, nail nick, or thumb stud

The 632 CB-1 model with crossbar system is the brand's first knife made with this locking mechanism, designed and developed to further expand the product range.

A MagnaCut steel blade with futuristic lines has been designed for this new model, with a drop point profile that allows for different opening modes: via the pivot and hole on the blade, crossbar, flipper, or with a flick of the wrist.

The stonewashed finish of the blade perfectly matches the handles, available in Micarta or G10, characterized by shapes and designs studied to ensure an optimal balance between grip and ergonomics. The reversible pocket clip ensures comfort and versatility, making it suitable for both left- and right-handed users.

The 632 CB-1 with crossbar system is a state-of-the-art folding knife, designed to offer safety, performance, and reliability in every situation.

Intended use: Sports

Country of manufacture: Italy
Total length: 193mm
Blade length: 80mm
Blade thickness: 3.2mm
Blade material: CPM-MagnaCut 62HRC steel with stonewashed finish
Handle material: G-10
Weight: 120g.
Pocket clip: removable and reversible, stainless steel
Screws: stainless steel
Lock type: Crossbar Lock (Axis)
Notes: ball bearing opening system via flipper, nail nick, or thumb stud

The 632 CB-1 model with crossbar system is the brand's first knife made with this locking mechanism, designed and developed to further expand the product range.

A MagnaCut steel blade with futuristic lines has been designed for this new model, with a drop point profile that allows for different opening modes: via a pin and hole on the blade, crossbar, flipper, or with a flick of the wrist.

The stonewashed finish of the blade perfectly matches the handles, available in Micarta or G10, characterized by shapes and designs studied to ensure an optimal balance between grip and ergonomics. The reversible pocket clip ensures comfort and versatility, making it suitable for both left- and right-handed users.

The 632 CB-1 with crossbar system is a state-of-the-art folding knife, designed to offer safety, performance, and reliability in every situation.

Intended use: Sports

Country of manufacture: Italy
Total length: 193mm
Blade length: 80mm
Blade thickness: 3.2mm
Blade material: CPM-MagnaCut 62HRC steel with stonewashed finish
Handle material: G-10
Weight: 120g.
Pocket clip: removable and reversible, stainless steel
Screws: stainless steel
Lock type: Crossbar Lock (Axis)
Notes: ball bearing opening system via flipper, nail nick, or thumb stud

New version with Damax™ Damascus steel blade by Alleima, a new high-end industrial Damascus steel, obtained using an innovative technique that allows for the large-scale production of up to 135 layers of martensitic stainless steel. This material maintains the same quality and aesthetic appeal as handcrafted Damascus steel, but with an efficient, repeatable, and more accessible industrial process.

Production takes place in collaboration with Balbachdamast GmbH & Co. KG, a German company specializing in Damascus forging, creating the world's first industrial production of true Damascus steel. The new steel is suitable for multiple applications, from kitchen cutlery to outdoor cutlery.

Alleima, formerly Sandvik Materials Technology, is a global manufacturer of advanced stainless steels, special alloys, and industrial heating solutions, based in Sandviken (Sweden), with over 5,500 employees and customers in approximately 90 countries.

Intended use: Sports / Gentleman / Collection

Type of production: Industrial
Country of production: Italy
Blade: 120-layer Alleima Damax stainless Damascus steel
Blade finish: -
Handle: Beech burl
Blade length: 3.15 inches.
Blade thickness: 0.76 inches.
Closed length: 4.1 inches.
Total length: 7.2 inches.
Closed thickness: 0.5 inches.
Weight: 70g.
Opening: two-handed
Closure: slipjoint - simple spring
Clip: - 
Sheath: leather pocket case with Maserin logos
Packaging: Cardboard box with Maserin logos
Notes: Inspired by the “Marinera” knife, a typical vintage penknife from the city of Maniago

The 915 Path, designed by Igor Bortolussi, is a compact fixed blade knife with a contemporary design, designed to offer great versatility of use and remarkable resistance. Made entirely in Maniago, it is designed to be a reliable cutting tool in any situation.

The drop point blade is made of M390 stainless steel, known for its excellent edge retention and corrosion resistance. The slim, ergonomic handle ensures a secure and comfortable grip.

The leather sheath with magnet system allows you to carry the knife in your pocket discreetly, with the blade completely covered, or with the handle exposed and ready for use.

The Path is an elegant and functional fixed blade knife, designed for those seeking uncompromising performance and style.

Intended use: Sports

Country of manufacture: Italy
Total length: 170mm
Blade length: 80mm
Blade thickness: 3.3mm
Blade material: full tang in M390 61/62HRC stainless steel with satin finish
Handle material: Walnut wood
Weight: 95g.
Sheath: leather, with magnetic attachment system
Notes: Design by Igor Bortolussi

The 916 Path, designed by Igor Bortolussi, is a compact fixed blade knife with a contemporary design, designed to offer great versatility of use and remarkable resistance. Made entirely in Maniago, it is designed to be a reliable cutting tool in any situation.

The reverse tanto blade is made of M390 stainless steel, known for its excellent edge retention and corrosion resistance. The slim, ergonomic handle ensures a secure and comfortable grip.

The leather sheath with magnet system allows you to carry the knife in your pocket discreetly, with the blade completely covered, or with the handle exposed and ready for use.

The Path is an elegant and functional fixed blade knife, designed for those seeking uncompromising performance and style.

Intended use: Sports

Country of manufacture: Italy
Total length: 170mm
Blade length: 80 mm
Blade thickness: 3.3 mm
Blade material: full tang in M390 61/62HRC stainless steel with stonewashed finish
Handle material: Micarta
Weight: 95 g
Sheath: leather, with magnetic attachment system
Notes: Design by Igor Bortolussi

The 915 Path, designed by Igor Bortolussi, is a compact fixed blade knife with a contemporary design, designed to offer great versatility of use and remarkable resistance. Made entirely in Maniago, it is designed to be a reliable cutting tool in any situation.

The drop point blade is made of M390 stainless steel, known for its excellent edge retention and corrosion resistance. The slim, ergonomic handle ensures a secure and comfortable grip.

The leather sheath with magnet system allows you to carry the knife in your pocket discreetly, with the blade completely covered, or with the handle exposed and ready for use.

The Path is an elegant and functional fixed blade knife, designed for those seeking uncompromising performance and style.

Intended use: Sports

Country of manufacture: Italy
Total length: 170mm
Blade length: 80 mm
Blade thickness: 3.3 mm
Blade material: full tang in M390 61/62HRC stainless steel with stonewashed finish
Handle material: Micarta
Weight: 95 g
Sheath: leather, with magnetic attachment system
Notes: Design by Igor Bortolussi

The 630 and 631 PULSE models designed by Igor Bortolussi are EDC folding knives that are “siblings,” sharing a common design vision but distinguished by the profile of the blade: curved for the 630, Tanto-inspired for the 631. The design, created in collaboration with Straightline EDC, combines soft lines and bold features in a modern, ergonomic, and essential synthesis.

The name PULSE—which evokes momentum and heartbeat—perfectly expresses the dynamic sensation you feel when holding these tools. Both models are equipped with the innovative W-Lock opening system, which ensures greater safety during use.

Intended use: Sports

Country of manufacture: Italy
Total length: 190mm
Blade length: 80mm
Blade thickness: 3.3mm
Blade material: CPM-MagnaCut 62HRC steel with stonewashed finish
Handle material: Micarta
Weight: 85g.
Pocket clip: removable and reversible, stainless steel
Screws: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal activation on the back of the knife)
Notes: Design by Igor Bortolussi

The 630 and 631 PULSE models designed by Igor Bortolussi are EDC folding knives that are “siblings,” sharing a common design vision but distinguished by the profile of the blade: curved for the 630, Tanto-inspired for the 631. The design, created in collaboration with Straightline EDC, combines soft lines and bold features in a modern, ergonomic, and essential synthesis.

The name PULSE—which evokes momentum and heartbeat—perfectly expresses the dynamic sensation you feel when holding these tools. Both models are equipped with the innovative W-Lock opening system, which ensures greater safety during use.

Intended use: Sports

Country of manufacture: Italy
Total length: 190mm
Blade length: 80mm
Blade thickness: 3.3mm
Blade material: CPM-MagnaCut 62HRC steel with stonewashed finish
Handle material: Micarta
Weight: 85g.
Pocket clip: removable and reversible, stainless steel
Screws: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal activation on the back of the knife)
Notes: Design by Igor Bortolussi

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: D2 carbon steel with compound grinding
Blade finish: Satin
Handle: Stainless steel scales and Santos wood handle
Blade length: 108mm.
Blade thickness: 3.5mm.
Closed length: 127mm.
Total length: 225mm.
Handle thickness: 18 mm
Weight: 105 g
Closing mechanism: Liner Lock
Clip: polished stainless steel, removable
Packaging: Cardboard box with Maserin Sport logos
Notes: Opens using Carson Flipper system on ball bearings

504/D NEXUS: Beyond the Knife, a Work of Innovation and Design

The 504/D NEXUS is not just a knife, but a real design made with the support of a state-of-the-art laboratory using 3D additive printing technology in steel. The name NEXUS (meaning “nexus,” “connection,” “link”) perfectly encapsulates the essence of this extraordinary tool: an encounter between the past and the future, between tradition and innovation.

A Unique and Refined Design

Blade and Handle as a Connection between Ages: The blade and handle of the 504/D NEXUS symbolize the link between the classic and the modern, combining the tradition of damascus with revolutionary 3D printing.
Handle with Trellis Pattern: The handle details, featuring a unique lattice pattern on each side, evoke the natural uniqueness of wood grain, creating a perfect blend of past and contemporary.
Strength and Aesthetics: The handle arms are designed for extraordinary mechanical strength, encased in a classically designed profile that enhances both functionality and aesthetics.

Limited Edition.
The 504/D NEXUS will be produced in a limited edition of only 100 numbered pieces, making each one a true collector's item.

Intended use: collectible

Type of production: Industrial
Country of manufacture: Italy
Blade: Stainless damascus steel “Rose”
Blade treatment: -
Handle: In fully 3D printed AISI316L stainless steel with lattice pattern
Blade length: 80mm.
Blade thickness: 3.2mm.
Total length: 190mm.
Weight: 142g.
Closure: Slip Joint
Clip: stainless steel
Sheath: -
Packaging: cardboard box with Maserin logos and warranty certificate
Notes: Limited Edition in only 100 numbered pieces

The 502 Power is a gentleman knife, created by one of our long-time collaborators, Sergio Consoli, a master of the knife art and above all one for whom creating knives is an art form. The lines of the 502 highlight the refined elegance and signature mark of a knife maker with a background as a technical designer. This new closer is lightweight, easy to handle, and assembled with fine materials. The CNC machining of the handle, in addition to giving the Fatcarbon version an excellent grip, further enhances the color facets. The 502 is a closer intended for those who like to stand out in style.

Intended use: Sporting

Country of manufacture: Italy
Total length: 185mm
Blade length: 80mm
Blade thickness: 3.2mm
Blade material: stainless steel N690Co 59HRC
Handle material: FatCarbon
Weight: 90 grams
Pocket clip: removable, polished stainless steel
Hardware: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal drive on the back of the knife)
Notes: Design by Sergio Consoli

The 502 Power is a gentleman knife, created by one of our long-time collaborators, Sergio Consoli, a master of the knife art and above all one for whom creating knives is an art form. The lines of the 502 highlight the refined elegance and signature mark of a knife maker with a background as a technical designer. This new closer is lightweight, easy to handle, and assembled with fine materials. The CNC machining of the handle, in addition to giving the Fatcarbon version an excellent grip, further enhances the color facets. The 502 is a closer intended for those who like to stand out in style.

Intended use: Sporting

Country of manufacture: Italy
Total length: 185mm
Blade length: 80mm
Blade thickness: 3.2mm
Blade material: stainless steel N690Co 59HRC
Handle material: FatCarbon
Weight: 90 grams
Pocket clip: removable, polished stainless steel
Hardware: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal drive on the back of the knife)
Notes: Design by Sergio Consoli

The 502 Power is a gentleman knife, created by one of our long-time collaborators, Sergio Consoli, a master of the knife art and above all one for whom creating knives is an art form. The lines of the 502 highlight the refined elegance and signature mark of a knife maker with a background as a technical designer. This new closer is lightweight, easy to handle, and assembled with fine materials. The CNC machining of the handle, in addition to giving the Fatcarbon version an excellent grip, further enhances the color facets. The 502 is a closer intended for those who like to stand out in style.

Intended use: Sporting

Country of manufacture: Italy
Total length: 185mm
Blade length: 80mm
Blade thickness: 3.2mm
Blade material: stainless steel N690Co 59HRC
Handle material: G10
Weight: 90 grams
Pocket clip: removable, polished stainless steel
Hardware: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal drive on the back of the knife)
Notes: Design by Sergio Consoli

371 W2 is a gentleman knife brother of the 373 Tungsten, with one important difference: the blade is made of M390 steel with a satin finish and a prism sharpening line. It shares the handle shape with the 373 Tungsten, but is slightly heavier and was created to offer a wider audience the knife design idea that won the "Most Innovative Imported Design" award at BLADE SHOW 2023 - Largest Knife Show in the World - in Atlanta U.S.A.

Intended Use: Sporting

Country of manufacture: Italy
Total length: 185mm
Blade length: 80mm
Blade thickness: 3.2mm
Blade material: stainless steel M390 60HRC
Handle material: forged Fat Carbon fiber
Weight: 85 grams
Pocket clip: -
Hardware: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal drive on the back of the knife)
Notes: Design by Attilio "Atti" Morotti

The Maserin Gladio Alato was designed to equip the personnel of the 66th Trieste Airborne Infantry Regiment, the only airborne infantry unit in the entire Armed Force, with a dagger that reflects the spirit, symbolism and specific needs of the unit.

To develop the Winged Gladio, the Maniago-based company collaborated with the Centro Formazione Aeromobile (CFA), affiliated with the Trieste Regiment. The blade has a design reminiscent of the classic Gladio, while the handle, typical of military tactical daggers, features a texture that provides an excellent grip.

Given the tactical context in which the unit operates, the dagger has been equipped with additional features for emergencies: there is a slot glass breaker and two holes on the guard that allow the knife to be attached to a pole or other supports.

Intended Use: Tactical/Military

Type of production: Industrial
Country of manufacture: Italy
Blade: single edge, full tang in N690Co steel at 59HRC
Blade treatment: DLC
Handle: G10
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 312mm.
Weight: 234g.
Sheath: made of kydex, belt-mounted, compatible with MOLLE attachments
Packaging: cardboard box with Maserin logos
Notes: Designed to equip the personnel of the 66th Airborne Infantry Regiment Trieste, the only airborne infantry unit in the entire Italian Armed Force.

Indispensable tool for maintenance and maintenance of the cutting edge of a knife.

Handle: in synthetic material.
Total length: 45.5 cm. (handle 11 cm)
Abrasive part length: 27.5 cm.
Weight: 465 gr.

Tips for knife maintenance

Appropriate maintenance prolongs the life of the knife, makes work easier and safer and reduces thread consumption. Some advices:

- Pay attention so that knives placed in the dishwasher do not hit other objects; the blades could be damaged.

- Dishwasher-safe knives that are not immediately washed in the machine should be rinsed under the tap to remove highly corrosive food residues (fats, vinegar, fruit juices).

- If the knives no longer cut perfectly, make sure to have them ground or sharpened by professionals in the sector.

Intended use: sports/steak

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel W1.4116
Blade treatment: satin finish
Handle: ebony
Blade length: 83mm.
Blade thickness: 2.5mm.
Closed length: 103mm.
Total length: 185mm.
Closed thickness: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Intended use: sports/steak

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel W1.4116
Blade treatment: satin finish
Handle: briar
Blade length: 83mm.
Blade thickness: 2.5mm.
Closed length: 103mm.
Total length: 185mm.
Closed thickness: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Intended use: Sports/Hunting

Type of production: Industrial
Blade production: Italy
Blade: 440 stainless steel
Blade Treatment: -
Handle: Olive wood with steel liners
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 220mm.
Closed thickness: 20mm.
Weight: 170g.
Closure: Back Lock
Clips: -
Sheath: in cordura
Packaging: cardboard box with Maserin logos
Note: On the back of the blade, a sharp skinner extends. This skinner, with its curved and sharp shape, is designed to separate the skin from the animal's body with extraordinary ease and precision. Whether it's a deer, bear or smaller prey, this tool proves to be a reliable companion for any hunter.

Intended use: Sporting

Production type: Industrial
Country of production: Italy
Blade: Elmax steel at 61HRC
Blade finish: Satin finish
Handle: Stainless steel and Fat Carbon with gold highlights
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 160mm.
Weight: 110g.
Closure: Liner Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: Cardboard box with Maserin logos
Notes: Design by Bruno Bruna "Graciut"

Intended use: collectible / sporting

Type of production: Industrial
Country of Production: Italy
Blade: Elmax steel at 61HRC
Blade finish: satin-finished
Handle: Made of anodized titanium and Fat Carbon with blue highlights
Blade length: 80mm.
Blade thickness: 3.4mm.
Total length: 175mm.
Weight: 92g.
Closure: Frame Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Winner of the "Most Innovative Imported Design" at the Blade Show in 2023, this knife is designed by Attilio Morotti made in collaboration with Sandrin knives that supplies the tungsten carbide blades that, made through a sophisticated machining process, reach the extraordinary hardness of 71 HRC, yet at the same time maintaining a high twisting capacity and resilience.

Intended Use: Sporting / Collection

Country of manufacture: Italy
Total length: 150mm
Blade length: 80mm
Blade thickness: 1.5 mm
Blade material: polyhedral tungsten carbide 71 HRC hardness
Handle material: forged Fat Carbon fiber
Weight: 78 grams
Pocket clip: -
Hardware: stainless steel
Lock type: W-Lock (modified backlok, with longitudinal drive on the back of the knife)
Notes: Design by Attilio "Atti" Morotti - Blades by Sandrin Knives - Winner at the Blade Show 2023 of "Most Innovative Imported Design"

Intended use: sporting/for table use

Type of production: Industrial
Country of Production: Italy
Blade: Stainless damascus steel "Rose"
Blade finish: -
Handle: fat carbon with green highlights
Blade length: 97mm.
Blade thickness: 2.5mm.
Length closed: 118mm.
Total length: 217mm.
Thickness when closed: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: -
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio "Atti" Morotti

Material: stainless steel
Handle: plastic polymer
Total length: 34,8cm.
Sharpener length: 23cm.
Total weight: 179g.

Indispensable tool for maintenance and upkeep of the cutting edge of the professional kitchen knife.

Made of nonabrasive stainless steel, it does not remove material and is therefore recommended for daily edge maintenance on already sharpened or well-sharpened products.

On the other hand, in case you need to resharpen the knife entirely, we recommend purchasing more abrasive products such as diamond sharpeners or sharpening stones with low grits.

Mini-Trapper is a fixed-blade outdoor knife that, thanks to its small size, can be carried comfortably in your pocket while hiking.

Made of Elmax steel with a hardness of 61 HRC, it is extremely durable and suitable for all uses, including hunting to process small prey. The groove on the back of the blade acts as a thumb gripper allowing the knife to be guided safely.

Mini-Trapper has a one-piece construction into which deer antler insignia are attached by steel screws.


Intended Use: Hunting / Hiking

Production type: Industrial
Country of manufacture: Italy
Blade: full tang in Elmax 61HRC steel
Blade treatment: Stonewashed
Handle: deer antler
Blade length: 65mm.
Blade thickness: 4mm.
Total length: 120mm.
Weight: 76g.
Sheath: leather
Packaging: cardboard box with Maserin logos
Notes: -

Maserin - Set of 6 forged steak knives with wooden box with magnets 2095 - table knives

Handle: BLACK POM

Blade length: 11 cm

Blade: Steel 4116N HRC 57/58 with nitrogen tempering

Blade finish: polished. Includes a magnetic wooden case that looks good and keeps the knives tidy in the drawer.

Forged knives are fine knives, made using a production process known as forging, which is carried out with a mallet, a machine that exerts tons of pressure on 2 moulds - between which a steel 'billet' is placed, brought to a temperature of around 1200 Celsius - and shapes the piece.

From the shaping of the metal, the typical knife shapes are obtained: the knot and the handle.

One of the characteristics of forged knives is that they are heavier than others, a quality sought after by chefs and professionals who prefer a solid handle and a clean, precise cut.

The forged knife is best suited for cutting raw meats, roasts and thicker vegetables.

Intended use: Collection / Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: D2 58/61HRC steel
Blade finish: satin-finished
Handle: G10 and anodised titanium
Blade length: 93mm.
Blade thickness: 3.8mm.
Length closed: 122mm.
Total length: 215mm.
Thickness when closed: 10mm.
Weight: 88g.
Closure: Frame Lock with removable stainless steel hinge
Clip: Inoz steel, removable, placed on the back of the knife
Notes: Ball bearing opening movement - Design by Attilio "Atti" Consoli

To commemorate in our own way the 50th anniversary of the death of our great-grandfather Giuseppe Maserin known as "Belu" (1885 - 1972), an Alpine soldier of the 4th Battalion Cadore Regiment and Cav. of Vittorio Veneto, we wanted to make a dagger in the manner of the "Arditi", that is, inspired by those handcrafted daggers that were made from the former bayonets of the Carcano 91 rifles. Specifically, we were inspired by the shape of the bayonet that was made at the CO.RI.CA.MA factory in Maniago.

We called it BeluM joining the M of our surname to 'Belu', thus obtaining a reference to the Latin word 'bellum'. It is a project of clear historical inspiration, but realised with modern machinery, technology and materials. The stenciled wooden box deliberately recalls the features of the crates in which war material was once stored.

BeluM is dedicated to our great-grandfather Giuseppe and all the heroes who sacrificed their lives for their country in any way.

Intended Use: Commemorative / Historical / Military 

Type of production: Industrial
Country of Production: Italy
Blade: Full tang in N690Co stainless steel 
Blade treatment: Satin finish
Handle: Paosantos wood; AIS 420 stainless steel guard; AISI 316 stainless steel pommel forged from solid
Blade length: 202mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 340g.
Sheath: leather
Packaging: wooden box with stencil logos
Notes: Design by Bonus Design

Intended Use: Utility / Hiking

Production type: Industrial
Country of Production: Italy
Blade: Full tang, D2 tool steel hardened to 58/61HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 115mm.
Blade thickness: 6mm.
Total length: 280mm.
Balance: advanced
Weight: 576g.
Sheath: kydex
Packaging: Cardboard box with Maserin logos
Notes: Design by Alessandro Olivetto

Intended use: sharpener/sportsman

Type of production: Industrial
Country of Production: Italy
Blades: Stainless steel 420
Blade treatment: Nanoceramic HNCF
Handle: Carbon Fiber "FatCarbon"
Blade Length: 65mm.
Blade thickness: 2.2mm.
Length closed: 90mm.
Total length: 200mm.
Thickness when closed: 8mm.
Weight: 32g.
Closure: Slip Join
Clip: absent
Sheath: leather pouch
Packaging: cardboard box with Maserin logos
Notes: -

Intended use: sharpener/sportsman

Type of production: Industrial
Country of Production: Italy
Blades: Stainless steel 420
Blade treatment: Nanoceramic HNCF
Handle: Carbon Fiber "FatCarbon"
Blade Length: 65mm.
Blade thickness: 2.2mm.
Length closed: 90mm.
Total length: 200mm.
Thickness when closed: 8mm.
Weight: 32g.
Closure: Slip Join
Clip: absent
Sheath: leather pouch
Packaging: cardboard box with Maserin logos
Notes: -

The collaboration with Attilio Morotti returns for the creation of this elegant knife of small size but with high strength thanks to the use of top-quality Swedish steel and expert craftsmanship finish. Useful on any occasion and convenient to carry at all times thanks to its magnetic leather sheath made in Italy.



Intended Use: Hunting/Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in Sandvik 14C28N stainless steel
Blade treatment: Satin finish, with rounded edges
Handle: Stabilized maple burl
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 151mm.
Weight: 56g.
Scabbard: pocket, leather, with magnetic clasp (no belt loops/hooks)
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

The collaboration with Attilio Morotti returns for the realization of this elegant knife of small size but with high strength thanks to the use of Swedish steel of excellent quality and skillful craftsmanship finish. Useful on any occasion and convenient to carry at all times thanks to its magnetic leather sheath made in Italy.


Intended Use: Hunting/Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in Sandvik 14C28N stainless steel
Blade treatment: Satin finish, with rounded edges
Handle: Stabilized maple burl
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 151mm.
Weight: 56g.
Scabbard: pocket, leather, with magnetic clasp (no belt loops/hooks)
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Wüsthof Germany - 20 cm Chinese Chef - 1129500220 - Kitchen Knife

Wusthof presents the magnificent Gourmet Chinese Chef's Knife with a 20 cm blade.

This knife possesses the shape of a cleaver but, in fact, it is not suitable for slicing bones, but rather for cutting and chopping herbs and vegetables. In fact, this knife allows you to chop food very quickly, and thanks to the wide blade, it will then be easy to introduce them directly into the pots. It is not recommended for use on very hard foods: for example, coconut.

Wusthof Gourmet Collection: more than 35 blade steps, reduced product weight, and bilious ergonomics are the main features of these designer knives. With Gourmet knives, every cut becomes a true sensory experience.

We recommend hand washing the product.

Wüsthof Germany - 18 cm Chinese Chef - 1129500218 - Kitchen Knife

Wusthof presents the magnificent Gourmet Chinese Chef's Knife with an 18 cm blade.

This knife possesses the shape of a cleaver but, in fact, it is not suitable for slicing bones, but rather for cutting and chopping herbs and vegetables. In fact, this knife allows you to chop food very quickly, and thanks to the wide blade, it will then be easy to introduce them directly into the pots. It is not recommended for use on very hard foods: for example, coconut.

Wusthof Gourmet Collection: more than 35 blade steps, reduced product weight, and bilious ergonomics are the main features of these designer knives. With Gourmet knives, every cut becomes a true sensory experience.

We recommend hand washing the product.

Intended Use: Utility / Hiking

Production type: Industrial
Country of Production: Italy
Blade: Full tang, tool steel D2
Blade Finish: Stonewashed
Handle: G-10
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 290mm.
Balance: slightly advanced
Weight: 412g.
Sheath: nylon, with thigh and belt attachments
Package: Cardboard box with Maserin logos - diamond sharpener - wire saw for wood
Note: Design by Davide Bomben, president of the Associazione Italiana Esperti d'Africa (Italian Association of African Experts) and chief instructor of the Poaching Prevention Academy, an organization that in Namibia and other African countries trains rangers against poachers. He is the director of training for the African Field Guides Association and for over ten years has worked with the tour operator Il Diamante and with Wilderness Safaris as a guide and ranger. He has published guides to Namibia, South Africa and Botswana and three books on African mammals and birds. He is the promoter and referent of numerous projects for the protection of African wildlife such as rhinos, lions, elephants and gorillas.

Intended Use: Utility / Hiking

Production type: Industrial
Country of Production: Italy
Blade: Full tang, tool steel D2
Blade Finish: Stonewashed
Handle: G-10
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 290mm.
Balance: slightly advanced
Weight: 412g.
Sheath: nylon, with thigh and belt attachments
Package: Cardboard box with Maserin logos - diamond sharpener - wire saw for wood
Note: Design by Davide Bomben, president of the Associazione Italiana Esperti d'Africa (Italian Association of African Experts) and chief instructor of the Poaching Prevention Academy, an organization that in Namibia and other African countries trains rangers against poachers. He is the director of training for the African Field Guides Association and for over ten years has worked with the tour operator Il Diamante and with Wilderness Safaris as a guide and ranger. He has published guides to Namibia, South Africa and Botswana and three books on African mammals and birds. He is the promoter and referent of numerous projects for the protection of African wildlife such as rhinos, lions, elephants and gorillas.

What a chef's knife is for European kitchens, the Santoku knife is for Japan and all of Asia - so versatile in shape, weight and blade that it can be used to grind and mince herbs, vegetables and fruit, as well as to prepare fish and meat. The sharp blade of the Santoku allows for both regular cuts and very thin cuts - it is therefore now indispensable in all kitchens in the world.

Recommended use: Cut of vegetables - minced - beaten
Blade length: 17cm

THE CLASSIC SERIES

The Handles: made of synthetic material and joined with a triple riveting ensure a perfect seal, excellent stability and guarantee dishwasher safe.
The Blades: are obtained using the best steels and combining the most qualified elements (chromium 15% - carbon 0.5% - molybdenum - vanadium).
The creation of a WUSTHOF forged knife requires the passage of about 40 processing cycles.

Maintenance

Proper maintenance prolongs the life of the knife, makes work easier and safer and reduces the consumption of the wire. Some advices:
- Pay attention that the knives placed in the dishwasher collide with other objects; the blades could be damaged.
- Knives guaranteed for dishwashers that are not immediately washed in the machine should be rinsed under the water tap to remove the remains of highly corrosive foods (fats, vinegar, fruit juices).
- Make sure if the knives no longer cut perfectly, have them rectified or sharpened by professionals in the sector.

The WUSTHOF knives sold by us are personally checked and further sharpened, in order to guarantee you the certainty of an excellent purchase.

All Wusthof products we sell are indelibly silk-screened with the Coltelleria Collini logo (as shown in the image). This marking guarantees the buyer to have the certainty of quality, traceability, guarantee over the years and a future privileged assistance on the product purchased from Coltelleria Collini.

On the occasion of the theatrical release of the highly anticipated film Diabolik, directed by the Manetti Bros with Luca Marinelli, Miriam Leone and Valerio Mastandrea, we present the new version of Diabolik's knife, one of the most loved figures by fans of noir comics. Created in collaboration with the Astorina publishing house, we offer the new official "replica" version of the famous Throwing Knife of the King of Terror.

The new “999 \ LG Diabolik” throwing knife in special edition, replica features and style of the knife drawn in the original comic strips. Unlike the model made for the previous 50th, we have made some important changes. Like the logo of the anti-hero, Diabolik, in 24k gold on the knife blade and the elegant walnut handle.

Type of production: Industrial
Production Lama: Italy
Blade: N690 satin-finished stainless steel with 24K gold Diabolik engraving
Blade treatment: -
Handle: walnut wood
Blade length: 160mm.
Blade thickness: 5mm.
Closed length: -mm.
Total length: 290mm.
Thick when closed: -mm.
Balancing: -
Weight: 265g.
Closure: -
Clip: -
Sheath: nylon, made in Italy, by Radar
Packaging: cardboard box with Maserin and Diabolik logos
Notes: Officially licensed collectible / exhibition product

Six iconic steak knives, each a unique piece thanks to different handles, each made with wood from a different region of the world: granadilla from Africa, walnut from America, rosewood from Mexico, maple from Canada, birch from Scandinavia and rosewood from Brazil make each handle unique and give it an almost magical aura.

Perfectly sharpened, they enrich each board with their discreet and natural beauty, while the hand-finished blades impress with their exceptional sharpness, gliding effortlessly and with the utmost precision through the flesh, without damaging its delicate fibers. It's a cut that brings out the natural flavors best, and it feels!

The leather case is hand-sewn in Germany according to strict quality criteria. For the production of this high quality leather, only natural tanning agents and fats are used which give it its original charm and, over time, the unmistakable patina typical of well-made leather.

- Forged from a single piece of specially hardened high carbon steel for exceptional strength.

- Special alloy steel. Stainless.

- Triple rivet wood scales, full tang handle.

- Blade length 12 cm (4 ½ ").

This knife is made in Maniago from an idea of the designer Alex Olivetto aka Bonus, also from Maniago. Design and product made in Italy, exactly as our customers want.

The D-Dut is a small but strong multi-purpose knife with essential tools to carry with you in everyday life. An object so small can solve emergency situations or small repair operations.

Our company this year reaches the milestone of 61 candles, and in the 60s and 70s our company made the classic multipurpose knife with handles in nylon, wood buffalo horn and deer horn. Today, this knife still has the DNA of its ancestors: inspiration, functionality and reliability.

Awarded during the Blade Show 2021 in Atlanta as "Most Innovative Imported Design".

Intended Use: Multipurpose/Sporting

Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel 440C 58/60HRC
Blade Finish: Stonewashed
Handle: Anodized aluminum
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 85mm.
Total length: 145mm.
Weight: 80g.
Closure: Liner Lock
Clip: -
Scabbard: Nylon
Package: Cardboard box with Maserin logos
Notes: Design by Alex Olivetto - Winner as Most Innovative Imported Design at Blade Show 2021
Accessories: Reamer, Slotted Screwdriver, Philips Screwdriver, Perforator, Awl

This knife is made in Maniago from an idea of the designer Alex Olivetto aka Bonus, also from Maniago. Design and product made in Italy, exactly as our customers want.

The D-Dut is a small but strong multi-purpose knife with essential tools to carry with you in everyday life. An object so small can solve emergency situations or small repair operations.

Our company this year reaches the milestone of 61 candles, and in the 60s and 70s our company made the classic multipurpose knife with handles in nylon, wood buffalo horn and deer horn. Today, this knife still has the DNA of its ancestors: inspiration, functionality and reliability.

Awarded during the Blade Show 2021 in Atlanta as "Most Innovative Imported Design".

Intended Use: Multipurpose/Sporting

Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel 440C 58/60HRC
Blade Finish: Stonewashed
Handle: Anodized aluminum
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 85mm.
Total length: 145mm.
Weight: 80g.
Closure: Liner Lock
Clip: -
Scabbard: Nylon
Package: Cardboard box with Maserin logos
Notes: Design by Alex Olivetto - Winner as Most Innovative Imported Design at Blade Show 2021
Accessories: Reamer, Slotted Screwdriver, Philips Screwdriver, Perforator, Awl

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in 440C 58HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Balancing: backward
Weight: 151
Sheath: nylon
Packaging: cardboard box with Maserin logos
Note:

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in 440C 58HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Balancing: backward
Weight: 151
Sheath: nylon
Packaging: cardboard box with Maserin logos
Note:

The ham knife has earned its fame: its shape and sharpness are designed to cut very thin slices of hard food, especially hams. These qualities make the knife also suitable for fruit and vegetables and other meats, as well as for carving roasts.

Forged series
- 26 cm blade
- Total length 37.5 cm

Handles: made of synthetic material and joined with a triple riveting ensure a perfect seal, excellent stability and guarantee dishwasher safe.
The Blades: are obtained using the best steels and combining the most qualified elements (chromium 15% - carbon 0.5% - molybdenum - vanadium).
The realization of a WUSTHOF forged knife requires the passage of about 40 processing cycles.

Maintenance

Proper maintenance prolongs the life of the knife, makes work easier and safer and reduces the consumption of the wire. Some advices:

- Pay attention that the knives placed in the dishwasher bump other objects; the blades could be damaged.

- Knives guaranteed for dishwashers that are not immediately washed in the machine should be rinsed under the water tap to remove the remains of highly corrosive foods (fats, vinegar, fruit juices).

- Make sure if the knives no longer cut perfectly, have them rectified or sharpened by professionals in the sector.

The WUSTHOF knives sold by us are personally checked and further sharpened, in order to guarantee you the certainty of an excellent purchase.

All Wusthof products we sell are indelibly silk-screened with the Coltelleria Collini logo (as shown in the image). This marking guarantees the buyer to have the certainty of quality, traceability, guarantee over the years and a future privileged assistance on the product purchased from Coltelleria Collini.

Made from high-quality steel, the fork offers strength and durability. The use of chromium-molybdenum-vanadium steel helps ensure long life and reliable performance.

The design is optimized for versatility. With a length of 14 cm, it is ideal for hanging, serving or holding food effectively. The black handle features a triple rivet and all-metal core for a secure and comfortable grip, and the fork blade is laser-cut and hardened to a high hardness of 56° Rockwell. 

It is particularly suitable for those looking for a light and handy tool, suitable for both novice chefs and more experienced professionals. Its high-quality construction and ergonomic design make it an excellent choice for everyday cooking.

Hand washing is recommended to preserve the quality and durability of the utensil.

Recommended use: Hanging, serving or holding food.

Country of manufacture: Germany

Blade: Surgical steel X50

Handle: Black resin handle with a triple rivet.

Blade length: 14cm.

Handle length: 10cm.

Total length: 24cm.

Weight: 76g.

The knife is very original, the blade recalls that of the grafting knife, a well-known traditional knife from Maniago.
In - Estro is made looking to the past but with modern design and materials. Lightweight and practical to carry thanks to its E.D.C steel clip. Carbon D 2 tool steel is used for the blade, while anodized aluminum with G10 inserts is used for the handles.

Intended use: sports / steak

Type of production: Industrial
Country of production: Italy
Blade: D2 steel
Blade treatment: satin finish
Handle: G10
Blade length: 65mm.
Blade thickness: 2.5mm.
Closed length: 105mm.
Total length: 200mm.
Thick when closed: 17mm.
Weight: 68g.
Closure: Slip Join
Clip: absent
Sheath: -
Packaging: cardboard box with Maserin logos
Note:

The knife is very original, the blade recalls that of the grafting knife, a well-known traditional knife from Maniago.
In - Estro is made looking to the past but with modern design and materials. Lightweight and practical to carry thanks to its E.D.C steel clip. Carbon D 2 tool steel is used for the blade, while anodized aluminum with micarta inserts is used for the handles.
Intended use: sports / steak

Type of production: Industrial
Country of production: Italy
Blade: D2 steel
Blade treatment: satin finish
Handle: Micarta and aluminum
Blade length: 65mm.
Blade thickness: 2.5mm.
Closed length: 105mm.
Total length: 200mm.
Thick when closed: 17mm.
Weight: 68g.
Closure: Slip Join
Clip: absent
Sheath: -
Packaging: cardboard box with Maserin logos
Note:

Black, sharp and unsurpassed, a series with a unique design that meets pure dynamism.
The WÜSTHOF Performer Knife series proves its worth with every use: exceptional quality for very high performance. The ultra-hard blade, coated in diamond-like carbon (DLC) guarantees low friction and perfect sliding of the blade during cutting. The non-slip honeycomb structure of the Hexagon Power Grip guarantees extreme control. This knife will win you over for a lifetime!

The cut of the Performer knives flows through the food with almost no friction. Thanks to the particularly low friction, the non-stick properties of the diamond-like coating and the lotus effect of the black surface, the particles simply roll off the blade. Freshly cut pieces of food, such as slices of an onion, slip away: an ideal situation when speed and precision are required in moments of intense activity in the kitchen.

Thanks to the hydrophobic effect, all liquids flow away, including citrus acids, as well as fats or starches from potatoes.
The DLC was originally employed for the extreme conditions of space travel and motorsports; WÜSTHOF is the first knife manufacturer in the world to use this technology on a fully forged knife.
USE: vegetables, meat, fish
FEATURES:

- Diamond-like carbon coating increases surface hardness to 104 Rockwells
- Thanks to this coating, the knife glides effortlessly through the food
- Newly developed Hexagon Power Grip with anti-slip honeycomb structure
- Forged from a single piece of WÜSTHOF stainless steel
- Forged in Solingen, Germany
DIMENSIONS:

- Blade length 20 cm
- Total length 34 cm
- Weight: 257 gr.

Diamond-like carbon coated blade for extreme performance.

The diamond-like carbon (DLC) coated blade, being extremely hard and durable, is the highest quality in the knife market. The almost magical black coating increases the surface hardness of WÜSTHOF steel from 58 to a unique 104 Rockwell.

For connoisseurs, this means a significant benefit in terms of performance: its extreme robustness makes it practically immune to adverse external effects and the diamond surface is also extremely heat resistant.

The DLC was originally developed for the extreme conditions of space travel and motorsports; WÜSTHOF is the first knife manufacturer in the world to use this technology on a fully forged knife with holder.

Black, sharp and unsurpassed, a series with a unique design that meets pure dynamism.
The WÜSTHOF Performer Knife series proves its worth with every use: exceptional quality for very high performance. The ultra-hard blade, coated in diamond-like carbon (DLC) guarantees low friction and perfect sliding of the blade during cutting. The non-slip honeycomb structure of the Hexagon Power Grip guarantees extreme control. This knife will win you over for a lifetime!

The cut of the Performer knives flows through the food with almost no friction. Thanks to the particularly low friction, the non-stick properties of the diamond-like coating and the lotus effect of the black surface, the particles simply roll off the blade. Freshly cut pieces of food, such as slices of an onion, slip away: an ideal situation when speed and precision are required in moments of intense activity in the kitchen.

Thanks to the hydrophobic effect, all liquids flow away, including citrus acids, as well as fats or starches from potatoes.
The DLC was originally employed for the extreme conditions of space travel and motorsports; WÜSTHOF is the first knife manufacturer in the world to use this technology on a fully forged knife.
USE: vegetables, meat, fish
FEATURES:

- Diamond-like carbon coating increases surface hardness to 104 Rockwells
- Thanks to this coating, the knife glides effortlessly through the food
- Newly developed Hexagon Power Grip with anti-slip honeycomb structure
- Forged from a single piece of WÜSTHOF stainless steel
- Forged in Solingen, Germany
DIMENSIONS:

- Blade length 17 cm
- Total length 30.5 cm
- Weight: 172 gr.

Diamond-like carbon coated blade for extreme performance.

The diamond-like carbon (DLC) coated blade, being extremely hard and durable, is the highest quality in the knife market. The almost magical black coating increases the surface hardness of WÜSTHOF steel from 58 to a unique 104 Rockwell.

For connoisseurs, this means a significant benefit in terms of performance: its extreme robustness makes it practically immune to adverse external effects and the diamond surface is also extremely heat resistant.

The DLC was originally developed for the extreme conditions of space travel and motorsports; WÜSTHOF is the first knife manufacturer in the world to use this technology on a fully forged knife with holder.

The collaboration with Alessandro Zanin continues who has thought of a special knife, Gost Tactical Folder. A light but robust folder, suitable for any use, but with a particular vocation for the CQB - CQC.
The use of the best materials guarantees excellent handling and agility, the excellent balance and the ergonomic study of the handle give an ideal grip with every grip.
The powerful blade instills safety and strength. Finally the knife adjusts to the hand and not vice versa, thus allowing movement and fluidity.

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 85mm.
Blade thickness: 3.2mm.
Closed length: 140mm.
Total length: 220mm.
Thick when closed: 16.4mm.
Weight: 225g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Alessandro Zanin

Fixed blade tactical knife designed by Alessandro Zanin.
Built without compromise modeled on the biomechanics of the hand, sculpted curves for maximum contact and absolute control, aggressive, powerful, agile and fast in hand changes.
Specialized for the most extreme uses.

Intended use: Tactical / Light Utility

Type of production: Industrial
Country of production: Italy
Blade: full tang in D2 58HRC steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 110mm.
Blade thickness: 6mm.
Total length: 250mm.
Balancing: set back
Weight: 353
Sheath: in Kydex,
Packaging: cardboard box with Maserin logos
Note:

Intended use: sports

Type of production: Industrial
Country of production: Italy
Blade: semi-carbon steel D2
Blade treatment: Stonewashed
Handle: Olive Wood
Blade length: 80mm.
Blade thickness: 2mm.
Closed length: 105mm.
Total length: 185mm.
Thick when closed: 13mm.
Weight: 70g.
Opening: two-handed
Closure: slipjoint - simple spring
Clip: -
Sheath: -
Packaging: Cardboard box with Maserin logos
Notes: Inspired by the "Marinera" knife, a typical vintage penknife from the city of Maniago

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: M390 stainless steel
Lama treatment: Stonewashed
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 133mm.
Overall length: 222 mm.
Thick when closed: 12.1mm.
Weight: 125g.
Closure: BackLock
Clip: deep pocket type, stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Maserin logos
Notes: Skull Crasher optional, included in the package, to be mounted on the shank at the top of the clip - Design by Tommaso Rumici

A boning knife is a kitchen tool specifically designed to remove bones from meat, poultry or fish. It features a thin, sharp blade with a pointed tip, allowing it to easily penetrate between joints and joints to separate meat from bones precisely and efficiently.

The blade of a boning knife can vary in length, but it is usually shorter than that of a standard kitchen knife. This allows for greater control during the boning operation, as the shorter blade can be handled with ease and precision.

CLASSIC Series Forged, Made in Germany
- 14 cm blade

The Handles: made of synthetic material and joined with triple riveting ensure a perfect hold, excellent stability and guarantee dishwasher safe.
The Blades: are made using the best steels and combining the most qualified elements (15% chromium - 0.5% carbon - molybdenum - vanadium).
The making of a WUSTHOF forged knife involves the passage of about 40 processing cycles.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: M390 stainless steel
Lama treatment: Stonewashed
Handle: G10
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 133mm.
Overall length: 222 mm.
Thick when closed: 12.1mm.
Weight: 125g.
Closure: BackLock
Clip: deep pocket type, stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Maserin logos
Notes: Skull Crasher optional, included in the package, to be mounted on the shank at the top of the clip - Design by Tommaso Rumici

Designed by Ettore Zanon, Croz is a high-quality fixed knife designed to eviscerate ungulates.

It is a simple and lightweight 23cm wide blade, 11 of which 4mm thick blade, N690 steel, 60 HRC, one of the best in the world with a high carbon content and a hardness that allows it to work well without losing the thread. Suture in the part near the handle is intended to facilitate work on the bony parts.

For ergonomics, cheeks are tapped to make it more difficult to slip in the work phases. Maximum safety, guaranteed by generous guard and knurling at the top of the blade, which will make it extremely difficult to lose grip.

Purpose: Hunting / Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co 60HRC
Blade Treatment: Satin
Handle: Black G10
Blade Length: 110mm.
Blade thickness: 4mm.
Total Length: 230mm.
Balance: Returned to 2.5cm. from the guard branch
Weight: 190g.
Sheath: in Nylon
Packing: Cardboard box with Maserin logos
Notes: Dotted by Ettore Zanon - In the grip there is a handy diamond sharpener attached to the tang.

Designed by Ettore Zanon, Croz is a high-quality fixed knife designed to eviscerate ungulates.

It is a simple and lightweight 23cm wide blade, 11 of which 4mm thick blade, N690 steel, 60 HRC, one of the best in the world with a high carbon content and a hardness that allows it to work well without losing the thread. Suture in the part near the handle is intended to facilitate work on the bony parts.

For ergonomics, cheeks are tapped to make it more difficult to slip in the work phases. Maximum safety, guaranteed by generous guard and knurling at the top of the blade, which will make it extremely difficult to lose grip.

Purpose: Hunting / Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co 60HRC
Blade Treatment: Satin
Handle: Micarta
Blade Length: 110mm.
Blade thickness: 4mm.
Total Length: 230mm.
Balance: Returned to 2.5cm. from the guard branch
Weight: 190g.
Sheath: in Nylon
Packing: Cardboard box with Maserin logos
Notes: Dotted by Ettore Zanon - In the grip there is a handy diamond sharpener attached to the tang.

Intended use: tactical / military

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Full Tang in stainless steel N690Co
Blade treatment: Stonewashed
Handle: G10
Blade Length: 70mm.
Blade thickness: 3mm.
Total length: 190mm.
Balancing: Rearranged
Weight: 80g.
Sheath: Kydex, neck or belt, with Tek-Lok multiposition attachment
Packing: Cardboard box with Maserin logos
Notes: designed by Russ Kommer

Intended use: tactical / military

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Full Tang in stainless steel N690Co
Blade treatment: Stonewashed
Handle: G10
Blade Length: 70mm.
Blade thickness: 3mm.
Total length: 190mm.
Balancing: Rearranged
Weight: 80g.
Sheath: Kydex, neck or belt, with Tek-Lok multiposition attachment
Packing: Cardboard box with Maserin logos
Notes: designed by Russ Kommer

Intended use: tactical / military

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Full Tang in stainless steel N690Co
Blade treatment: Teflonatura
Handle: G10
Blade Length: 70mm.
Blade thickness: 3mm.
Total length: 190mm.
Balancing: Rearranged
Weight: 80g.
Sheath: Kydex, neck or belt, with Tek-Lok multiposition attachment
Packing: Cardboard box with Maserin logos
Notes: designed by Russ Kommer

Purpose of use: Multipurpose rescue

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade Treatment: Stonewashed
Handle: G10 with florescent inserts and stainless steel liners
Blade Length: 85mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Closed thickness: 24mm.
Weight: 270g.
Opening: opening pin on the blade / recess on the blade
Washers: Teflon
Closure: 3 independent Liner Lock systems, one per tool
Clip: Stainless steel, removable and reversible
Sheath: in Nylon
Packing: Cardboard box with Maserin logos
Notes: belt-size tool - saw for wood - shutter glass on the shank

An indispensable tool for maintenance of knife cutting edge.

Diamond grain: to be used with care as being more "aggressive" than a regular steel rod. Ideal for restoring a particularly dull or damaged wire, we recommend a subsequent passage with a finer grain base.

Handle: synthetic material.
Total Length: 39 cm.
Length of abrasive element: 26 cm.
Weight: 270 gr.

Tips for knife maintenance

Appropriate maintenance extends the knife life, makes work easier and safer, and reduces wire consumption. Some advices:

- Be careful that the knives put into the dishwasher an urtin other objects; They could damage the blades.

- Dishwasher safe knives that are not immediately washed in the machine should be rinsed under the tap to remove the remains of highly corrosive foods (fat, vinegar, fruit juice).

- Make sure if the knives no longer cut to perfection, make them straighten or sharpen by professionals in the industry.