vegetables knives

Recommended use: Wide-blade chef’s knife for professional and advanced home use; ideal for chopping, mincing, and slicing meat, fish, vegetables, and herbs in large volumes
Manufacturing type: Forged from a single piece of steel
Country of manufacture: Germany, Solingen
Blade: Special high-carbon stainless steel WÜSTHOF X50CrMoV15, approx. 58 HRC hardness
Blade finish: Plain edge with PEtec sharpening, satin finish
Handle: Ergonomic black POM (polyoxymethylene) handle, triple-riveted, full tang, Classic series
Blade length: 260 mm
Blade thickness: 3 mm
Closed length: 2.5 mm
Total length: approx. 389 mm
Weight: 309 g
Packaging: Original WÜSTHOF Classic box, suitable also as gift packaging
Notes: Forged Classic series, PEtec laser-assisted sharpening, extra-tall blade for better stability and knuckle clearance; hand wash recommended, dishwasher not advised

Recommended use: Versatile kitchen knife for home or professional use; ideal for tender vegetables, fruits, cold cuts, small meat cuts, and medium prep work
Manufacturing type: Forged from a single piece of steel
Country of manufacture: Germany, Solingen
Blade: High-carbon WÜSTHOF X50CrMoV15 stainless steel, hardness 58 HRC
Blade finish: Plain edge, PEtec sharpening, satin finish
Handle: Black POM (polyoxymethylene), triple-riveted, full tang, ergonomic Classic design
Blade length: 160 mm
Blade thickness: 2.5 mm
Total length: approx. 268 mm
Weight: approx. 91 g
Packaging: Original WÜSTHOF Classic box, also suitable as a gift box
Notes: Laser-assisted PEtec sharpening, 58 HRC hardness, made in Solingen; hand washing recommended, not dishwasher safe

The Mikoto collection represents the excellence of Japanese tradition: each blade is made with 101 layers of FC63 laminated Damascus steel with high corrosion resistance, embellished with an exclusive diamond pattern obtained through acid etching. The handle, embellished with the Miyabi logo, guarantees authenticity and craftsmanship.

Key features
* Balanced octagonal micarta handle, double riveted, non-porous and resistant to deformation
* FC63 laminated steel: cutting edge with 63HRC hardness and 101 outer layers of Damascus with diamond pattern
* 3-stage Honbazuke manual sharpening, with a 9.5°–12° edge
* Handcrafted in Seki, Japan

Recommended use: meat, fish, and vegetables

Country of manufacture: Seki, Japan
Blade structure: sanmai, with 101 layers of Damascus steel on the outside
Cutting steel: stainless steel, FC63 at 63HRC
Sharpening type: Honbazuke, symmetrical
Blade finish: Passive acid etching
Blade length: 180 mm
Construction: Forged
Handle: Octagonal, micarta, with double rivets
Maintenance: Hand wash only

The Mikoto collection represents the excellence of Japanese tradition: each blade is made with 101 layers of FC63 laminated Damascus steel with high corrosion resistance, embellished with an exclusive diamond pattern obtained through acid etching. The handle, embellished with the Miyabi logo, guarantees authenticity and craftsmanship.

Key features
* Balanced octagonal micarta handle, double riveted, non-porous and resistant to deformation
* FC63 laminated steel: cutting edge with 63HRC hardness and 101 outer layers of Damascus with diamond pattern
* 3-stage Honbazuke manual sharpening, with a 9.5°–12° edge
* Handcrafted in Seki, Japan

Recommended use: meat and vegetables

Country of manufacture: Seki, Japan
Blade structure: sanmai, with 101 layers of Damascus steel on the outside
Cutting steel: stainless steel, FC63 at 63HRC
Sharpening type: Honbazuke, symmetrical
Blade finish: Passive acid etching
Blade length: 200 mm.
Construction: Forged
Handle: Octagonal, micarta, with double rivets
Maintenance: Hand wash only

The Mikoto collection represents the excellence of Japanese tradition: each blade is made with 101 layers of FC63 laminated Damascus steel with high corrosion resistance, embellished with an exclusive diamond pattern obtained through acid etching. The handle, embellished with the Miyabi logo, guarantees authenticity and craftsmanship.

Key features
* Balanced octagonal micarta handle, double riveted, non-porous and resistant to deformation
* FC63 laminated steel: cutting edge with 63HRC hardness and 101 outer layers of Damascus with diamond pattern
* 3-stage Honbazuke manual sharpening, with a 9.5°–12° edge
* Handcrafted in Seki, Japan

Recommended use: meat and vegetables

Country of manufacture: Seki, Japan
Blade structure: sanmai, with 101 layers of Damascus steel on the outside
Cutting steel: stainless steel, FC63 at 63HRC
Sharpening type: Honbazuke, symmetrical
Blade finish: Passive acid etching
Blade length: 160 mm.
Construction: Forged
Handle: octagonal, micarta, with double rivets
Maintenance: wash by hand only

The main features of GLOBAL knives are:
- Lightness: GLOBAL was the first company in the world to produce a knife with a hollow steel handle.
- Ease of handling: thanks to their lightness and the anatomical shape of the handle, GLOBAL knives are suitable for continuous and prolonged use, minimising user fatigue.
- Edge retention: The blades contain a high percentage of molybdenum/vanadium, which gives the steel a hardness of 56/58 Rockwell, thereby increasing the durability of the edge.
- Robustness: as GLOBAL knives are made entirely of steel (both the handle and the blade), they are virtually indestructible.
- Elegance

An oriental chef's knife with a hollow edge, ideal for cutting meat, vegetables and fruit with precision.
Made of Cromova 18 steel with a balanced steel handle and ergonomic grip, it guarantees clean, light and friction-free cuts thanks to its hollow-edged blade.
Perfect for everyday use, it combines professional quality, Japanese design and durability.

Recommended use: Knife for meat, vegetables and fruit.

Country of manufacture: Japan.

Blade: Surgical steel 56-58 HRC.

Blade length: 11 cm.

Total length: 22 cm.

Packaging: Cardboard box.

Kai celebrates 15 years of collaboration with chef Tim Mälzer with a truly special limited edition: the Shun Premier Tantō TDM-1785 knife, produced in only 6,666 pieces worldwide.

Inspired by the traditional Japanese Tantō (短刀) sword, this model features a straight back and a sharp edge, making it ideal for slicing large vegetables, portioning meat, filleting fish, and much more.

The blade features the characteristic hammered finish typical of the Shun Premier series and is engraved with the special “15 The Legend” commemorative logo, alongside Tim Mälzer's signature. Each knife is individually numbered on the bolster, making it a true collector's item.

The design of the TDM-1785 was awarded the prestigious German Design Award 2025 in the “Premium Design” category.

Blade: VG MAX stainless steel Damascus with a hardness of 61±1 HRC.
Handle: Pakkawood.
Blade length: 255 mm.
Handle length: 120 mm.
Blade thickness: 3 mm.
Total length: 375 mm.
Weight: 220 g.
Notes: not dishwasher safe.

The chef's knife is an essential kitchen tool, characterized by a long, sharp blade, usually between 15 and 20 cm. It is ideal for slicing, chopping, and dicing ingredients. The ergonomic handle ensures a secure grip, making food preparation precise and quick. When top-quality materials are combined with excellent design, the result is always of the highest standard.

Blade: Damascus stainless steel SanMai in VG10 with 67 layers
Handle: Blue Micarta
Blade length: 200 mm.
Handle length: 135 mm.
Blade thickness: 2.2 mm.
Total length: 335 mm.
Weight: 225 g.
Notes: do not wash in dishwasher

Packaging: elegant black cardboard box with technical information and product history - the package includes a polymer blade guard for knife protection

Renkei 連携 is a Japanese term meaning collaboration, coordination, or connection. It is used to express the idea of working together, in close cooperation, to achieve a common goal or to create synergies between different people or organizations.

This project, born from the collaboration between Coltelleria Collini of Busto Arsizio and Coltelleria Due Cigni of Maniago, is an excellent example of synergy between two Italian companies specialized in knife-making.

The Japanese VG10 steel used in this project, laminated with 67 layers and produced by Takefu Steel, is renowned for its exceptional resistance, durability, and ability to maintain a sharp edge over time. These characteristics make the steel ideal for high-quality knife production.

The 67-layer lamination technique gives the steel superior strength and flexibility compared to traditional steels. Additionally, the use of this Japanese steel gives the knives a distinctive and elegant design, with a unique wave pattern on the blade surface formed during the manufacturing process.

The collaboration between Coltelleria Collini and Coltelleria Due Cigni highlights how the combined expertise and traditions of two Italian entities can lead to the creation of high-quality products capable of competing with the best kitchen knives on the international market.

Thanks to the use of premium materials and meticulous attention to detail, these knives combine the excellence of Made in Italy with the high quality of Japanese tradition in the knife-making industry.

The chef's knife is a fundamental tool in the kitchen, characterized by a long, sharp blade, usually between 15 and 20 cm. It is ideal for slicing, chopping, and dicing ingredients. The ergonomic handle ensures a secure grip, making food preparation precise and quick. When top-quality materials are combined with excellent design, the result can only be of the highest level.

Blade: Damascus stainless steel SanMai in VG10 with 67 layers
Handle: Blue Micarta
Blade length: 150 mm.
Handle length: 130 mm.
Blade thickness: 2.2 mm.
Total length: 275 mm.
Weight: 155 g.
Notes: do not wash in dishwasher

Packaging: elegant black cardboard box with technical information and product history - the package includes a polymer blade guard for knife protection

Renkei 連携 is a Japanese term that means collaboration, coordination, or connection. It is used to express the idea of working together, in close cooperation, to achieve a common goal or to create synergies between different people or organizations.

This project, born from the collaboration between Coltelleria Collini of Busto Arsizio and Coltelleria Due Cigni of Maniago, is an excellent example of synergy between two Italian companies specialized in the knife-making industry.

The Japanese VG10 steel used in this project, laminated with 67 layers and produced by Takefu Steel, is renowned for its extraordinary resistance, durability, and ability to maintain a long-lasting sharp edge. These characteristics make the steel ideal for high-quality knife production.

The 67-layer lamination technique gives the steel superior strength and flexibility compared to traditional steels. Moreover, the use of this Japanese steel gives the knives a distinctive and elegant design, with a unique wave pattern on the blade surface that forms during the manufacturing process.

The collaboration between Coltelleria Collini and Coltelleria Due Cigni highlights how the combined expertise and traditions of two Italian entities can lead to the creation of high-quality products capable of competing with the best kitchen knives on the international market.

Thanks to the use of premium materials and attention to detail, these knives combine the excellence of Made in Italy with the high quality of Japanese tradition in the knife-making industry.

Wood, simplicity, effectiveness: Opinel has tapped into its roots and expertise to create the Parallèle kitchen knife range. The beechwood handle, robust and soft in the palm of the hand, with simple and softened lines, ensures a comfortable grip and an inimitable touch. The blade profiles have been designed to optimize movement and ensure a perfect cut suitable for any type of food.

Materials:

Blade: Made from full-tang stainless steel, with a hardness of 55-57 HRC. The steel used provides high resistance to corrosion and excellent mechanical performance. The smooth blade has an excellent edge, easily re-sharpenable, maintaining its effectiveness even after use with hard materials like ceramics.

Handle: Beech is the most commonly used wood for Opinel handles. Sourced from French plantations, it is hard, durable, and easy to work with. With a homogeneous appearance, its light color ranges from yellow to pinkish. It is recognizable by the presence of numerous dark streaks. The handle is varnished to be effectively protected from dirt and moisture.

Technical Specifications:

Recommended use: For trimming and cutting vegetables, preparing raw meat, and roughly cleaning fish. The 17mm blade remains rigid and stable during cutting.

Blade length: 170mm.
Blade thickness: 2.5mm.
Maintenance: Hand washing is recommended to preserve the quality of the wood and blade. Stainless steel offers low maintenance, but it is preferable to avoid prolonged contact with aggressive environments (acids, saltwater, detergents).

Wood, simplicity, effectiveness: Opinel has tapped into its roots and expertise to create the Parallèle kitchen knife range. The beechwood handle, robust and soft in the palm of the hand, with simple and softened lines, ensures a comfortable grip and an inimitable touch. The blade profiles have been designed to optimize movement and ensure a perfect cut suitable for any type of food.

Materials:

Blade: Made from full-tang stainless steel, with a hardness of 55-57 HRC. The steel used provides high resistance to corrosion and excellent mechanical performance. The smooth blade has an excellent edge, easily re-sharpenable, maintaining its effectiveness even after use with hard materials like ceramics.

Handle: Beech is the most commonly used wood for Opinel handles. Sourced from French plantations, it is hard, durable, and easy to work with. With a homogeneous appearance, its light color ranges from yellow to pinkish. It is recognizable by the presence of numerous dark streaks. The handle is varnished to be effectively protected from dirt and moisture.

Technical Specifications:

Recommended use: For slicing, thinly cutting, and chopping vegetables and meat with a rocking motion. The 20cm blade remains rigid and stable during cutting.

Blade length: 200mm.
Blade thickness: 2.5mm.
Maintenance: Hand washing is recommended to preserve the quality of the wood and blade. Stainless steel offers low maintenance, but it is preferable to avoid prolonged contact with aggressive environments (acids, saltwater, detergents).

KAI presents the new Shun Classic Red DM-0717RD as a highlight. The exclusive Wide Santoku combines the proven qualities of the Shun Classic series with a new and elegant red grain pakkawood handle in a limited edition. The knife is limited to only 3,000 pieces worldwide. The serial number engraved on the bolster makes each knife unique and desirable as a collector's item.

The extremely sharp blade is made of an extremely hard VG-MAX steel core with a hardness of 61 (±1) HRC and is coated with 32 layers of Damascus steel. This combination ensures an extremely stable, hard, and yet flexible blade, ideal for a clean and precise cut. The blade is ground on both sides and is particularly lightweight, making it easier to use in the kitchen.

As with the regular knives of the Shun Classic series, the special red grain handle of the Shun Classic Red is made of pakkawood. The treatment with selected resins makes it extremely soft, elastic, durable, and moisture-resistant. Thanks to the traditional Japanese "chestnut" shape of the handle, the Wide Santoku fits comfortably in the hand during cutting and offers a firm grip.

Recommended use: cutting and preparing vegetables - trimming and initial processing of fish

Country of Manufacture: Japan
Blade: 32-layer Damascus laminate and VG-10 stainless steel 
Handle: Pakkawood
Blade length: 190mm.
Blade thickness: 2mm.
Total length: 325mm.
Weight: 238g.
Maintenance: hand wash only / NOT dishwasher safe
Notes: Limited edition and numbered with only 3,000 pieces worldwide

GLOBAL Japanese knives are the favourite of chefs in the world's most prestigious hotels and restaurants.
The first GLOBAL knife was designed in 1985 by Komin Yamada, who gave the knife he created a revolutionary new design.

The main features of the GLOBAL knives are:
- Lightness: GLOBAL was the first company in the world to make a knife from steel, hollow in the handle. This feature reduces the weight of the knife by 30%.
- Ease of handling: Thanks to the lightness and anatomical shape of the handle, GLOBAL knives lend themselves to continuous and prolonged use, reducing user fatigue to a minimum.
- Blade hold: GLOBAL knives are manufactured using the best steels and the most modern processing techniques. A high percentage of Molybdenum/Vanadium is present in the blades, thanks to which the hardness of the steel reaches 56/58 Rockwell, thus increasing the life of the edge.
- Robustness: as GLOBAL knives are made entirely of steel (both handle and blade) they are practically indestructible.
- Elegance
Awards won by GLOBAL knives:

1990 - Japanese Good Design by MITI
1991 - Selected for International Design Year Book
1992 - Selected as Best Cooks' Knife in Benelux
1995 - Selected as Best Knife by WHICH Magazine in the UK
1996 - Selected as Sharpest Knife by A LA CARTE Magazine in GermanyJapanese GLOBAL knives are preferred by chefs in the world's most prestigious hotels and restaurants.
The first GLOBAL knife was designed in 1985 by Komin Yamada, who gave the knife he created a revolutionary new design.

The Kiritsuke is a versatile knife, ideal for working with fish in all its stages: from gutting, cutting and filleting to preparing precise portions such as fillets or sashimi. 

Recommended use: Fish knife.

Country of manufacture: Japan

Blade: Surgical steel 56-58 HRC

Blade length: 15cm.

Total length: 28cm.

Packaging: Cardboard box

The Kiritsuke Shun Classic DM-0777 is a true work of art in the kitchen. The blade is made of VG MAX steel, known for its hardness of 61 (±1) HRC, which guarantees exceptional and long-lasting sharpness. The VG MAX steel core is covered with 32 layers of Damascus steel, giving the blade an unmistakable appearance and a perfect combination of stability, resistance and elasticity.

The blades of the Shun Classic series are sharpened on both sides, offering precision and ease of use. The tapered handle is made of durable pakka wood, maintaining the traditional Japanese chestnut shape. This material, enriched with fine resins, guarantees exceptional resistance to use and humidity.

The typical chestnut shape of the handle ensures a secure and ergonomic grip, thanks to the slight contouring on the right side. In addition, the continuous tang provides optimal stability and balance during use.

Main features

Use: Meat and vegetables
VG MAX steel: Hardness of 61 (±1) HRC, blade core up to the edge.
Damascus steel coating: 32 layers for a perfect combination of stability and resistance.
Double-sided sharpening: Precision and ease of use.
Pakka wood handle: Traditional Japanese chestnut shape, resistant to use and moisture.
Continuous tang: Provides stability and balance.
Blade: 32-layer Damascus laminate and VG-10 stainless steel
Handle: Black Pakkawood
Blade length: 150 mm.
Blade thickness: 2 mm.
Total length: 275 mm.
Weight: 135 g.
Note: not dishwasher safe

Shun Classic is one of the flagship lines of the Kai Group (which currently also includes the Kershaw and Zero Tolerance brands), a famous Japanese industry that has been producing knives and razors since the early 1900s. It is a series of knives and kitchen accessories suitable for professionals and enthusiasts.

The meat and cheese knife from the Compendio Collection is a chef's knife particularly suitable for use in the preparation of meats, cheeses and vegetables that allows for gentle and precise cutting. Thanks to its handle, it is easy to handle and precise. The smooth blade allows food to be cut correctly during preparation in the kitchen or serving on the table, preserving its flavor and appearance.

Country of Production: Italy, Tuscany, Scarperia
Type of production: semi-crafted
Blade: NitroB stainless steel at 57HRC
Ice-colored methacrylate handle
Blade length: 200mm
Notes and Maintenance: we recommend hand washing and daily maintenance with sharpening steel rod

New blade design and exclusive leather case!

The Roselli Piccolo chef kitchen knife has been further improved with a new blade design, now 2mm thick (previously 3mm). This knife draws inspiration from Japanese tradition and is the perfect choice for all your cooking needs, both outdoors and indoors.

Thanks to its additional weight, this knife is ideal for chopping vegetables, slicing meat and expertly handling smaller bones. It's an indispensable tool for all your culinary adventures.

The blade is forged from high-quality carbon steel and is exceptionally sharp. The handle is made of beautiful curly birch wood and treated with linseed oil to ensure a comfortable and secure grip even when wet.

Now, the Roselli Piccolo Chef kitchen knife comes with an exclusively designed leather case, made of Finnish vegetable tanned leather. This case is both practical and aesthetically pleasing, allowing you to easily transport your beloved knife on all your adventures. Now you can protect your knife in style, wherever you go.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Blade production: Finland
Handle: Arctic Birch
Blade length: 135mm.
Blade thickness: 2mm.
Total length: 250mm.
Weight: 145g.
Sheath: Light vegetable tanned leather
Notes: Made, sharpened and perfected by hand in Harmoinen, Finland

The core of Kaname blades is made of an extremely durable VGXeos steel with a hardness of 60-62 (±1) HRC, rolled in two layers of stainless steel. The special manufacturing method ensures an incredibly thin cutting edge that reduces friction during use. This results in excellent and durable sharpness, promoting filigree, smooth and precise cuts.

To best design the handle, we combined the experiences of professionals and consumers. The result is a black-grained pakkawood handle that creates a seamless transition from the handle to the tang. The octagonal, ergonomic shape of the handle provides good control while cutting, while the knife rests securely and comfortably in the hand.

Blade: VGXeos rolled stainless steel with a hardness of 60/62±1 HRC
Country of manufacture: Japan
Handle: pakkawood
Blade length: 195mm.
Handle length: 130mm.
Blade thickness: 1.5mm.
Total length: 325mm.
Weight: 160g.
Care and maintenance: hand wash only - keep sharp with a fine-grained sharpening steel or sharpening stone of at least grit #3000

The core of Kaname blades is made of an extremely durable VGXeos steel with a hardness of 60-62 (±1) HRC, rolled in two layers of stainless steel. The special manufacturing method ensures an incredibly thin cutting edge that reduces friction during use. This results in excellent and durable sharpness, promoting filigree, smooth and precise cuts.

To best design the handle, we combined the experiences of professionals and consumers. The result is a black-grained pakkawood handle that creates a seamless transition from the handle to the tang. The octagonal, ergonomic shape of the handle provides good control while cutting, while the knife rests securely and comfortably in the hand.

Blade: VGXeos rolled stainless steel with a hardness of 60/62±1 HRC
Country of manufacture: Japan
Handle: pakkawood
Blade length: 150mm.
Handle length: 130mm.
Blade thickness: 1.5mm.
Total length: 280mm.
Weight: 134g.
Care and maintenance: wash by hand only - keep sharp with a fine-grained sharpening steel or a sharpening stone of at least grit #3000

On the occasion of the 40th anniversary of the birth of ceramic knives, which have now surpassed 20 million pieces sold worldwide, Kyocera presents two new product lines. 

Chowa Knives The word "chowa" means the pursuit of harmony, which is evident in the knife range through the combination of Japanese craftsmanship tradition and technical know-how.

The handle, inspired by the traditional Japanese hammer, is soft in the hand and its shape prevents wrist fatigue.

The blade excels in high wear resistance and maintains sharpness twice as long as Kyocera's conventional ceramic blades.

Kyocera's high technological and quality standards result in ceramic knives with timeless aesthetics combined with precision cutting. The unique properties of Kyocera ceramic knives make cooking a pleasure: the smooth surface of the blade allows for precise cuts, the extreme hardness of the material ensures excellent edge retention, as well as being incredibly lightweight and extremely resistant to corrosion.

They are indispensable tools that should never be lacking in a modern kitchen.

Blade: white zirconium ceramic (Z212), hand-sharpened

Soft-touch handle: plastic (ABS), ergonomically designed.

Blade guard: also available for safe knife storage.

Length: 16cm

With the two Kohen knives, the Japanese company once again demonstrates its great expertise in producing high-quality kitchen knives. The "Coreless" Damascus blade is made from VG2 and VG10 high-performance stainless steels that are forged and folded to produce 72 layers that alternate sequentially on the edge of the blade to ensure unmatched cutting and edge-holding performance.

A premium material such as pakkawood in red and black colorations was chosen for the handles. Also included in the set are two leather blade protector sheaths and an aluminum case for storing and transporting these two valuable knives safely. 

Blade: Japanese Coreless rolled stainless steel - 72 alternating layers of VG10 and VG2 at 60±2 HRC
Handle: Pakkawood
Kitchen knife blade length: 200mm.
Petty/utility knife blade length: 150mm.
Sheaths: leather, for use as blade covers
Packaging: aluminum case with warranty certificates
Edition: numbered and limited to 3000 pieces worldwide
Maintenance: hand wash only, do not wash in dishwasher

The Santoku is a knife that needs no introduction. A real joker in the kitchen, especially when working with vegetables. Nimble and light, it glides across the cutting board, chopping and mincing with precision. When form is combined with the substance of first-class materials, the result can only be of the highest standard.

Blade: SanMai VG10 Damascus stainless steel with 67 layers
Handle: Blue Micarta
Blade length: 180 mm.
Handle length: 130 mm.
Blade thickness: 2.2 mm.
Total length: 300 mm.
Weight: 194 g.
Note: Do not wash in the dishwasher.

Packaging: Elegant black cardboard box with technical information and product history - the package includes a polymer blade guard to protect the knife.

Renkei (連携) is a Japanese term that means collaboration, coordination, or connection. It is used to express the idea of working together, in close cooperation, to achieve a common goal or to create synergies between different people or organizations.

This project, born from the collaboration between Coltelleria Collini in Busto Arsizio and Coltelleria Due Cigni in Maniago, is an excellent example of synergy between two Italian companies specializing in the world of cutlery.

The Japanese VG10 steel used in this project, laminated to 67 layers and produced by Takefu Steel, is renowned for its extraordinary properties of strength, durability, and the ability to maintain a prolonged sharpness over time. These characteristics make the steel ideal for the production of high-quality knives.

The 67-layer lamination technique gives the steel superior strength and flexibility compared to traditional steels. Additionally, the use of this Japanese steel gives the knives a distinctive and elegant design, with a particular wave pattern on the surface of the blade that forms during the manufacturing process.

The collaboration between Coltelleria Collini and Coltelleria Due Cigni highlights how the combination of skills and traditions of two Italian entities can lead to the creation of high-quality products, capable of competing with the best kitchen knives on the international market.

Thanks to the use of precious materials and attention to detail, these knives combine the excellence of Made in Italy with the high quality of the Japanese tradition in the cutlery sector.

Sanelli Ambrogio - Ham Hand Cutting Set - 6 pieces - Kitchen Knives

Are you looking for an essential set of knives great for hand-cutting ham? -This set born from Sanelli Ambrogio's collaboration with Benedetto Colantuono is for YOU. -Benedetto Colantuono Master of Blades, qualified Cortador in Spain and perfected with famous cutters, has been working with leading producers of cured meats of excellence and has been practicing and teaching hand-cutting of raw ham for more than a decade.

His collaborations include: Cibus, Milano Golosa, Identità Golose, Masterpieces at the Table, Le Folies Berger in Paris, Host and some of the most important cooking schools .

THE 'ART OF CUTTING GOES THROUGH THE QUALITY OF THE BLADE :

THIS KIT REPRESENTS AN IDEAL SYNTHESIS TO ACHIEVE THE BEST RESULTS.

SET COLANTUONO by Ambrogio Sanelli consists of:

FRENCH KNIFE 24 cm SM99024B

ALVEOLATE BLADE SALMON KNIFE 32 cm SA56032B

ALVEULATED BLADE SALMON KNIFE STRAIGHT ALVEOLED 16 cm SD97.016B 

VEGETABLE KNIFE  7 cm ST91007B 

OVAL MICROFINE sharpening steel knife 30 cm 

GOURMET Pliers A1155.019 TRIANGLE 

Kai Europe offers another exclusive collaboration with master-chef Tim Mälzer: Small Kiritsuke 13 The Lucky Edition.

A special edition with an opaque brown handle and a 15 cm hammered blade. The edition is limited to only 5555 pieces and each one is numbered. As such, each knife is a unique collector's item.

As with the previous limited edition, the Kiritsuke was chosen, but in a smaller size. This is a type of Japanese knife that combines the design and characteristics of a usuba and a yanagiba. The usuba is used for cutting vegetables and the yanagiba for raw fish, for example when making sashimi. As such, the kiritsuke can be used for many different tasks in the kitchen: cutting vegetables, meat and fish. The tanto inverted profile makes the tip very flexible and perfect for precision tasks. The flat blade is perfect for other cutting tasks.

The superbly sharp blade is made of VG MAX steel with a hardness of 61 (± 1) HRC and surrounded by 32-layer Damascus steel. The Damascus steel makes each knife unique. The matt handle of this special edition is, like the regular knives in the Tim Mälzer Premier collection, made of walnut wood: it is moisture-resistant thanks to the resin treatment. The chestnut shape of the handle is comfortable in the hand and provides a firm grip when using the knife. 

Blade: Damascus stainless steel VG MAX hardness of 61±1 HRC
Handle: Matt walnut wood
Blade length: 155 mm.
Handle length: 120 mm.
Blade thickness: 1.9 mm.
Total length: 285 mm.
Weight: 151 g.
Notes: not dishwasher safe - wooden presentation box

The Fratelli Rizzi company was founded at the end of the 19th century in Premana, a small Italian mountain town located between Valtellina and Valsassina. Flexible and competitive company which, combining the typical characteristics of craftsmanship with the continuous search for new technologies, is synonymous with quality in the production of professional cutlery for cutting.

In 2012, after about 50 years of experience in the cutlery sector, the Fratelli Rizzi company decided to offer its own lines of professional cutlery under the name of MaglioNero, combining it with numerous collaborations with the best Italian and European operators in the field of professional cutlery.

Recommended use: raw meat, vegetables

Country of production: Premana, Italy
Cutting steel: Nitro-B stainless steel with a hardness of 57HRC
Blade finish: satin
Blade length: 150mm.
Construction: full tang with riveted handle
Handle: black POM
Maintenance: manual washing recommended; suitable for occasional washing in the dishwasher

Fratelli Rizzi was founded at the end of the 19th century in Premana, a small Italian mountain village located between Valtellina and Valsassina. A flexible and competitive company that, combining the typical characteristics of craftsmanship with the continuous research of new technologies, is synonymous with quality in the production of professional cutlery.

In 2012, after about 50 years of experience in the cutlery sector, Fratelli Rizzi decides to propose its own lines of professional cutlery under the name of MaglioNero, combining them with numerous collaborations with the best Italian and European operators in the field of professional cutlery.

THE ISIDE LINE
Developed with the help of Michelin-starred chef Iside De Cesare, it was created to best satisfy all cutting needs in the kitchen.
It features modern, elegant and functional lines, with a full silk handle and Nitro-B steel blades with a hardness of 57HRC to ensure a high level of edge retention and marked corrosion resistance. The handles, full tang, are made of polished POM with stainless steel rivets; their special design is studied to offer a comfortable ergonomics and optimize the balance of the knife.

Suggested use: cold cuts, cheeses, small vegetables

Country of production: Premana, Italy
Cutting edge steel: Nitro-B stainless steel with a hardness of 57HRC
Blade finish: mirror polished
Blade length: 140mm.
Construction: full tang with riveted handle
Handle: black POM
Maintenance: manual washing recommended; suitable for occasional washing in the dishwasher

Fratelli Rizzi was founded at the end of the 19th century in Premana, a small Italian mountain village located between Valtellina and Valsassina. A flexible and competitive company that, combining the typical characteristics of craftsmanship with the continuous research of new technologies, is synonymous with quality in the production of professional cutlery.

In 2012, after about 50 years of experience in the cutlery sector, Fratelli Rizzi decides to propose its own lines of professional cutlery under the name of MaglioNero, combining them with numerous collaborations with the best Italian and European operators in the field of professional cutlery.

THE ISIDE LINE
Developed with the help of Michelin-starred chef Iside De Cesare, it was created to best satisfy all cutting needs in the kitchen.
It features modern, elegant and functional lines, with a full silk handle and Nitro-B steel blades with a hardness of 57HRC to ensure a high level of edge retention and marked corrosion resistance. The handles, full tang, are made of polished POM with stainless steel rivets; their special design is studied to offer a comfortable ergonomics and optimize the balance of the knife.

Suggested use: vegetables, raw meat, fish

Country of production: Premana, Italy
Cutting edge: Nitro-B stainless steel with a hardness of 57HRC
Blade finish: satin
Blade length: 170mm.
Construction: full tang with riveted handle
Handle: black POM
Maintenance: manual washing recommended; suitable for occasional washing in the dishwasher

Fratelli Rizzi was founded at the end of the 19th century in Premana, a small Italian mountain village located between Valtellina and Valsassina. A flexible and competitive company that, combining the typical characteristics of craftsmanship with the continuous research of new technologies, is synonymous with quality in the production of professional cutlery.

In 2012, after about 50 years of experience in the cutlery sector, Fratelli Rizzi decides to propose its own lines of professional cutlery under the name of MaglioNero, combining them with numerous collaborations with the best Italian and European operators in the field of professional cutlery.

THE ISIDE LINE
Developed with the help of Michelin-starred chef Iside De Cesare, it was created to best satisfy all cutting needs in the kitchen.
It features modern, elegant and functional lines, with a full silk handle and Nitro-B steel blades with a hardness of 57HRC to ensure a high level of edge retention and marked corrosion resistance. The handles, full tang, are made of polished POM with stainless steel rivets; their special design is studied to offer a comfortable ergonomics and optimize the balance of the knife.

Suggested use: vegetables, raw meat, fish

Country of production: Premana, Italy
Cutting edge steel: Nitro-B stainless steel with hardness of 57HRC
Blade finish: satin
Blade length: 170mm.
Construction: full tang with riveted handle
Handle: black POM
Maintenance: manual washing recommended; suitable for occasional washing in the dishwasher

Fratelli Rizzi was founded at the end of the 19th century in Premana, a small Italian mountain village located between Valtellina and Valsassina. A flexible and competitive company that, combining the typical characteristics of craftsmanship with the continuous research of new technologies, is synonymous with quality in the production of professional cutlery.

In 2012, after about 50 years of experience in the cutlery sector, Fratelli Rizzi decides to propose its own lines of professional cutlery under the name of MaglioNero, combining them with numerous collaborations with the best Italian and European operators in the field of professional cutlery.

THE ISIDE LINE
Developed with the help of Michelin-starred chef Iside De Cesare, it was created to best satisfy all cutting needs in the kitchen.
It features modern, elegant and functional lines, with a full silk handle and Nitro-B steel blades with a hardness of 57HRC to ensure a high level of edge retention and marked corrosion resistance. The handles, full tang, are made of polished POM with stainless steel rivets; their special design is studied to offer a comfortable ergonomics and optimize the balance of the knife.

Suggested use: vegetables, raw meat, fish

Country of production: Premana, Italy
Cutting edge steel: Nitro-B stainless steel with hardness of 57HRC
Blade finish: satin
Blade length: 190mm.
Construction: full tang with riveted handle
Handle: black POM
Maintenance: manual washing recommended; suitable for occasional washing in the dishwasher

Fratelli Rizzi was founded at the end of the 19th century in Premana, a small Italian mountain village located between Valtellina and Valsassina. A flexible and competitive company that, combining the typical characteristics of craftsmanship with the continuous research of new technologies, is synonymous with quality in the production of professional cutlery.

In 2012, after about 50 years of experience in the cutlery sector, Fratelli Rizzi decides to propose its own lines of professional cutlery under the name of MaglioNero, combining them with numerous collaborations with the best Italian and European operators in the field of professional cutlery.

THE ISIDE LINE
Developed with the help of Michelin-starred chef Iside De Cesare, it was created to best satisfy all cutting needs in the kitchen.
It features modern, elegant and functional lines, with a full silk handle and Nitro-B steel blades with a hardness of 57HRC to ensure a high level of edge retention and marked corrosion resistance. The handles, full tang, are made of polished POM with stainless steel rivets; their special design is studied to offer comfortable ergonomics and optimize the balance of the knife.

Suggested use: raw meat, vegetables

Country of production: Premana, Italy
Cutting edge steel: Nitro-B stainless steel with a hardness of 57HRC
Blade finish: satin
Blade length: 210 mm
Construction: Solid tang with riveted handle
Handle: Black POM
Care: Hand washing is recommended; suitable for occasional dishwashing.

What a chef's knife is for European kitchens, the Santoku knife is for Japan and all of Asia - so versatile in shape, weight and blade that it can be used to grind and mince herbs, vegetables and fruit, as well as to prepare fish and meat. The sharp blade of the Santoku allows for both regular cuts and very thin cuts - it is therefore now indispensable in all kitchens in the world.

Recommended use: Cut of vegetables - minced - beaten
Blade length: 17cm

THE CLASSIC SERIES

The Handles: made of synthetic material and joined with a triple riveting ensure a perfect seal, excellent stability and guarantee dishwasher safe.
The Blades: are obtained using the best steels and combining the most qualified elements (chromium 15% - carbon 0.5% - molybdenum - vanadium).
The creation of a WUSTHOF forged knife requires the passage of about 40 processing cycles.

Maintenance

Proper maintenance prolongs the life of the knife, makes work easier and safer and reduces the consumption of the wire. Some advices:
- Pay attention that the knives placed in the dishwasher collide with other objects; the blades could be damaged.
- Knives guaranteed for dishwashers that are not immediately washed in the machine should be rinsed under the water tap to remove the remains of highly corrosive foods (fats, vinegar, fruit juices).
- Make sure if the knives no longer cut perfectly, have them rectified or sharpened by professionals in the sector.

The WUSTHOF knives sold by us are personally checked and further sharpened, in order to guarantee you the certainty of an excellent purchase.

All Wusthof products we sell are indelibly silk-screened with the Coltelleria Collini logo (as shown in the image). This marking guarantees the buyer to have the certainty of quality, traceability, guarantee over the years and a future privileged assistance on the product purchased from Coltelleria Collini.

Winner of the prestigious and international Good Design Award 2001 for the originality and functionality of its design.

- 11 cm black Ishi-Ba Sandgarden HIP ceramic blade. worked with motifs that recall those of Japanese karesansui and subjected to High Isostatic Pressing (HIP). Suitable for cutting fruit, vegetables, small meats
- Wooden handle

Quality made in Japan since 1984

With Kyocera ceramic knives, cooking becomes pure pleasure. Their special features:

- ultra-sharp zirconia ceramic blade, hand ground
- extremely robust and corrosion resistant blade
- high-tech material with excellent resistance to wear
- absolute cutting precision thanks to the smooth and compact surface of the blade
- maximum lightness and extreme practicality thanks to the ergonomic handle

The Ten Secrets of Ishi-Ba:

* does not carry tastes and smells
* is made of inert material
* does not cause chemical reactions with food
* avoids unpleasant flavors of metal
* does not rust
* does not deteriorate
* has no oxidizable parts
* it is easy to wash, just rinse it
* it is very light and easy to handle
* stays perfectly sharp, even for years

The origin of the management of the Kyocera Group is the Kyocera philosophy, a life philosophy based on the real life experiences and rules of thumb of Kazuo Inamori, founder and president emeritus of Kyocera Corporation. With the question "What is the right thing to do as a human being?" as a primary criterion, Kyocera's philosophy describes the significance of striving for proper management and acting in accordance with human ethical and moral values ​​and fundamental social norms.

BEFORE USING THE KNIFE, READ THESE INSTRUCTIONS CAREFULLY AND KEEP THEM

This knife will work for several years without any problems if:
• Removes it from the knife holder or drawer
• Uses it for straight cuts to be made on a cutting board
• Washes and dries it
• Puts it back into the knife holder or drawer after use

USE
Ideal for cutting boneless fruit, vegetables and meats
The term vegetables and fruit is generic: not all types of fruit or vegetables that are not recommended can be listed, but it is strictly not recommended to use them on dutra fruit and vegetables (pumpkin, coconuts, etc.)
Always use a plastic or wooden cutting board; avoid cutting on marble, stone, plates or tiles To chop, separate and de-bone, as well as to cut hard, frozen foods, bread with crust and cheeses, you always use your traditional steel knives. These types of cuts require bending and twisting and, for this reason, it is better to use a more flexible material than ceramic.
For its protection, the tip and base of the blade are not sharp

CLEANING
Hand wash with water and dish soap.
Kyocera ceramic knives with plastic handles are dishwasher safe. They should be placed in the compartment dedicated to ladles and small accessories in the upper basket, avoiding contact with other metal utensils. Kyocera ceramic knives with wooden handles are not dishwasher safe.
If discoloration occurs that does not go away with normal cleaning, wash the blade (not the handle) with a mild bleach solution.

TO AVOID
Do not drop on hard surfaces.
Do not use the tip as a pivot point, the sharp end could penetrate the cutting board, get stuck and break Do not expose the blade to direct flame (ceramic is a heat conductor). Do not use the side of the blade to crush garlic or other foods.

STORAGE
You place it in a knife holder, sheath or drawer. When placing or removing the knife from the holder, be careful not to damage the tip of the blade.

USURY
Over time, all knives lose their sharpness. A soft metal (stainless steel) blade "slips" when it loses its sharpness. Harder metals (such as carbon steel) stay sharp longer, but lose sharpness differently. Harder materials, instead of "slipping", tend to chip slightly.
In the beginning, the ceramic is sharper - and stays sharp for longer. Over time, small incisions may occur on the lo of the blade. This is the normal process whereby all hard material blades lose their sharpness.
Despite their appearance, the existence of small incisions does not necessarily mean that the knife is not sharp. You may find that it works flawlessly over an extended period of time.
When the performance of the knife is no longer the desired one, the Kyocera sharpening process will ensure that your knife returns to having a well-sharpened blade.

Elegante linea Gourmet da cucina realizzata da Laguiole en Aubrac con manici in legno di Wenge.

La tradizionale mosca e la croce del pastore si possono vedere sul manico così come una testina tutta decorata a
mano da un artigiano esperto che ricorda così la fabbricazione del famoso coltello pieghevole Laguiole.

La lama viene realizzata in acciaio inossidabile Sandik 14C28, famoso acciaio svedese di alta qualità.

Destinazione d'uso: coltello carne
Tipo di produzione: Artigianale
Produzione Lama: Francia
Lama: in acciaio 14C28
Manicatura: in legno di Wenge
Lunghezza lama: 185mm.
Spessore lama: 2mm.
Lunghezza totale: 322mm.
Peso: 139g.
Confezione: Scatola in cartone

Elegant Gourmet kitchen line made by Laguiole en Aubrac with Wenge wood handles.

The traditional fly and the shepherd's cross can be seen on the handle as well as a fully decorated head
hand by an expert craftsman who thus remembers the manufacture of the famous Laguiole folding knife.

The blade is made of Sandik 14C28 stainless steel, famous Swedish high quality steel.

Intended use: meat knife
Type of production: Artisan
Production Lama: France
Blade: 14C28 steel
Handle: in Wenge wood
Blade length: 240mm.
Blade thickness: 2mm.
Total length: 380mm.
Weight: 183g.
Packaging:

The IKON Chef model is the main kitchen knife thanks to its versatility perfect for cutting, mincing, slicing and dicing. Thanks to its weight and balance, it is also perfect for heavy work such as cutting vegetables and thicker meats.

The jewel of the WÜSTHOF IKON collection has an attractive design handle made of Grenadill wood. Grenadill wood, or African Blackwood, is one of the hardest and heaviest woods in the world. IKON full-tang knives are precision forged from one piece of unique high carbon stainless steel.

Wusthof Ikon

Usage: meat, vegetables
Blade length: 200mm
Type: Forged
Steel: X50 Cr Mo V 15
Hardness: 58 HRC
Handle: African Blackwood
Washing: Manual - NOT DISHWASHER SAFE

Recommended use: Vegetables

Country of production: Japan
Blade structure: sanmai with 49-layer external damask
Cutting steel: stainless steel, Sandvik FC61
Type of sharpening: Honbazuke, symmetrical
Blade finish: Passive etching
Blade length: 180mm.
Construction: Forged
Handle: in Nylon, triple rivet, with brass spacers
Maintenance: hand wash only

In the ancient City of Cutlery in Maniago, DUE CIGNI has been passionately producing high quality professional scissors and knives for over a century.
Special steels of the highest quality, innovative design and attention to the smallest details mean that DUE CIGNI products are not indifferent even to the most demanding user.
Latest generation machinery, qualified personnel and renovation are the elements on which the solid basis of the success of the DUE CIGNI brand is founded.
DUE CIGNI knives and scissors are ideal tools for professional users of the food and gastronomy sectors who need a perfect cut, effortlessly and lasting over time ... for over a hundred years.

Recommended use: chef's knife - meat, vegetables, fish

Country of production: Italy
Cutting steel: stainless steel 4116 X50CrMoV15 - HRC 55-57
Blade finish: satin
Blade length: 250mm.
Construction: full tang
Handle: black POM
Maintenance: also dishwasher safe

In the ancient City of Cutlery in Maniago, DUE CIGNI has been passionately producing high quality professional scissors and knives for over a century.
Special steels of the highest quality, innovative design and attention to the smallest details mean that DUE CIGNI products are not indifferent even to the most demanding user.
Latest generation machinery, qualified personnel and renovation are the elements on which the solid basis of the success of the DUE CIGNI brand is founded.
DUE CIGNI knives and scissors are ideal tools for professional users of the food and gastronomy sectors who need a perfect cut, effortlessly and lasting over time ... for over a hundred years.

Recommended use: chef's knife - meat, vegetables, fish

Country of production: Italy
Cutting steel: stainless steel 4116 X50CrMoV15 - HRC 55-57
Blade finish: satin
Blade length: 200mm.
Construction: full tang
Handle: black POM
Maintenance: also dishwasher safe

In the ancient City of Cutlery in Maniago, DUE CIGNI has been passionately producing high quality professional scissors and knives for over a century.
Special steels of the highest quality, innovative design and attention to the smallest details mean that DUE CIGNI products are not indifferent even to the most demanding user.
Latest generation machinery, qualified personnel and renovation are the elements on which the solid basis of the success of the DUE CIGNI brand is founded.
DUE CIGNI knives and scissors are ideal tools for professional users of the food and gastronomy sectors who need a perfect cut, effortlessly and lasting over time ... for over a hundred years.

Recommended use: chef's knife - meat, vegetables, fish

Country of production: Italy
Cutting steel: stainless steel 4116 X50CrMoV15 - HRC 55-57
Blade finish: satin
Blade length: 180mm.
Construction: full tang
Handle: black POM
Maintenance: also dishwasher safe

In the ancient City of Cutlery in Maniago, DUE CIGNI has been passionately producing high quality professional scissors and knives for over a century.
Special steels of the highest quality, innovative design and attention to the smallest details mean that DUE CIGNI products are not indifferent even to the most demanding user.
Latest generation machinery, qualified personnel and renovation are the elements on which the solid basis of the success of the DUE CIGNI brand is founded.
DUE CIGNI knives and scissors are ideal tools for professional users of the food and gastronomy sectors who need a perfect cut, effortlessly and lasting over time ... for over a hundred years.

Recommended use: chef's knife - meat, vegetables, fish

Country of production: Italy
Cutting steel: stainless steel 4116 X50CrMoV15 - HRC 55-57
Blade finish: satin
Blade length: 150mm.
Construction: full tang
Handle: black POM
Maintenance: also dishwasher safe

In the ancient City of Cutlery in Maniago, DUE CIGNI has been passionately producing high quality professional scissors and knives for over a century.
Special steels of the highest quality, innovative design and attention to the smallest details ensure that DUE CIGNI products do not go indifferent even to the most demanding user.
Latest generation machinery, qualified personnel and renovation are the elements on which the solid basis of the success of the DUE CIGNI brand is founded.
DUE CIGNI knives and scissors are ideal tools for professional users in the food and gastronomy sectors who need a perfect cut, effortlessly that lasts over time ... for over a hundred years.

Recommended use: vegetable, meat, fish knife

Country of production: Italy
Cutting steel: stainless steel 4116 X50CrMoV15 - HRC 55-57
Blade finish: satin
Blade length: 180mm.
Construction: full tang
Handle: black POM
Maintenance: also dishwasher safe

Recommended use: vegetables

Country of production: Japan
Blade structure: sanmai with 49-layer external damask
Cutting steel: stainless steel, Sandvik FC61
Type of sharpening: Honbazuke, symmetrical
Blade finish: Passive etching
Blade length: 210mm.
Construction: Forged
Handle: in Nylon, triple rivet, with brass spacers
Maintenance: hand wash only

Black, sharp and unsurpassed, a series with a unique design that meets pure dynamism.
The WÜSTHOF Performer Knife series proves its worth with every use: exceptional quality for very high performance. The ultra-hard blade, coated in diamond-like carbon (DLC) guarantees low friction and perfect sliding of the blade during cutting. The non-slip honeycomb structure of the Hexagon Power Grip guarantees extreme control. This knife will win you over for a lifetime!

The cut of the Performer knives flows through the food with almost no friction. Thanks to the particularly low friction, the non-stick properties of the diamond-like coating and the lotus effect of the black surface, the particles simply roll off the blade. Freshly cut pieces of food, such as slices of an onion, slip away: an ideal situation when speed and precision are required in moments of intense activity in the kitchen.

Thanks to the hydrophobic effect, all liquids flow away, including citrus acids, as well as fats or starches from potatoes.
The DLC was originally employed for the extreme conditions of space travel and motorsports; WÜSTHOF is the first knife manufacturer in the world to use this technology on a fully forged knife.
USE: vegetables, meat, fish
FEATURES:

- Diamond-like carbon coating increases surface hardness to 104 Rockwells
- Thanks to this coating, the knife glides effortlessly through the food
- Newly developed Hexagon Power Grip with anti-slip honeycomb structure
- Forged from a single piece of WÜSTHOF stainless steel
- Forged in Solingen, Germany
DIMENSIONS:

- Blade length 20 cm
- Total length 34 cm
- Weight: 257 gr.

Diamond-like carbon coated blade for extreme performance.

The diamond-like carbon (DLC) coated blade, being extremely hard and durable, is the highest quality in the knife market. The almost magical black coating increases the surface hardness of WÜSTHOF steel from 58 to a unique 104 Rockwell.

For connoisseurs, this means a significant benefit in terms of performance: its extreme robustness makes it practically immune to adverse external effects and the diamond surface is also extremely heat resistant.

The DLC was originally developed for the extreme conditions of space travel and motorsports; WÜSTHOF is the first knife manufacturer in the world to use this technology on a fully forged knife with holder.

Black, sharp and unsurpassed, a series with a unique design that meets pure dynamism.
The WÜSTHOF Performer Knife series proves its worth with every use: exceptional quality for very high performance. The ultra-hard blade, coated in diamond-like carbon (DLC) guarantees low friction and perfect sliding of the blade during cutting. The non-slip honeycomb structure of the Hexagon Power Grip guarantees extreme control. This knife will win you over for a lifetime!

The cut of the Performer knives flows through the food with almost no friction. Thanks to the particularly low friction, the non-stick properties of the diamond-like coating and the lotus effect of the black surface, the particles simply roll off the blade. Freshly cut pieces of food, such as slices of an onion, slip away: an ideal situation when speed and precision are required in moments of intense activity in the kitchen.

Thanks to the hydrophobic effect, all liquids flow away, including citrus acids, as well as fats or starches from potatoes.
The DLC was originally employed for the extreme conditions of space travel and motorsports; WÜSTHOF is the first knife manufacturer in the world to use this technology on a fully forged knife.
USE: vegetables, meat, fish
FEATURES:

- Diamond-like carbon coating increases surface hardness to 104 Rockwells
- Thanks to this coating, the knife glides effortlessly through the food
- Newly developed Hexagon Power Grip with anti-slip honeycomb structure
- Forged from a single piece of WÜSTHOF stainless steel
- Forged in Solingen, Germany
DIMENSIONS:

- Blade length 17 cm
- Total length 30.5 cm
- Weight: 172 gr.

Diamond-like carbon coated blade for extreme performance.

The diamond-like carbon (DLC) coated blade, being extremely hard and durable, is the highest quality in the knife market. The almost magical black coating increases the surface hardness of WÜSTHOF steel from 58 to a unique 104 Rockwell.

For connoisseurs, this means a significant benefit in terms of performance: its extreme robustness makes it practically immune to adverse external effects and the diamond surface is also extremely heat resistant.

The DLC was originally developed for the extreme conditions of space travel and motorsports; WÜSTHOF is the first knife manufacturer in the world to use this technology on a fully forged knife with holder.

Recommended Use: cutting and preparing vegetables, fish and white meat

Country of manufacture: Italy
Blade: surgical stainless steel with hardness of 54-56 HRC
Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive
Blade length: 160mm.
Total length: 285mm.
Packaging: cardboard blade cover with Sanelli logos.
Weight: 166g.

FORM AND FUNCTION
The Premana Professional line was created by analyzing and solving, in every detail, the problems faced by the most attentive professional who uses these working tools on a daily basis. By making the green knives of the Premana Professional line, Coltellerie Sanelli S.r.l. has significantly improved the concept of safety, reliability, and hygiene in a decisive way, paying attention not only to the hardness, flexibility and shearing power of the blades, but also to the ergonomic shape of the handle.

THE BLADES.
The convex shape of the blade provides effective support when considerable effort is required on the part of the user and is also characterized by: high hardness (54-56 HRC), good flexibility, high shearing power, long edge life, edge shape especially designed for professional use, and excellent ease of resharpening.

HANDLES.
Exclusive ergonomic design of the handle resulting from special studies carried out at qualified University Institutes (research unit called EPM: Ergonomics of Posture and Movement at the Polytechnic University of Milan) and validated by computerized experimental tests.

ANTIBACTERIAL PROTECTION
Sanelli and Biomaster have developed permanent antibacterial protection for the handles of Premana line knives through the use of silver ions.
Biomaster is a silver ion-based, inorganic additive suitable for imparting antibacterial characteristics to plastics that safely inhibits microbial growth from the first few minutes, reaching almost total inhibition within 24 hours. Once incorporated into a product, Biomaster becomes an integral part of it providing safe, effective and inexhaustible antimicrobial protection.
Laboratory tests have shown that Biomaster, incorporated into the handles of Sanelli Premana Professional Line knives, is effective in the permanent microbiological eradication of Escherichia Coli and Staphylococcus Aureus (MRSA) to the extent of 99.7 percent, obtaining ISO22196:20111 certification.

Recommended Use: cutting and preparing vegetables, fish and white meat

Country of manufacture: Italy
Blade: surgical stainless steel with hardness of 54-56 HRC
Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive
Blade length: 180mm.
Total length: 310mm.
Packaging: cardboard blade cover with Sanelli logos.
Weight: 170g.

FORM AND FUNCTION
The Premana Professional line was created by analyzing and solving, in every detail, the problems faced by the most attentive professional who uses these working tools on a daily basis. By making the green knives of the Premana Professional line, Coltellerie Sanelli S.r.l. has significantly improved the concept of safety, reliability, and hygiene in a decisive way, paying attention not only to the hardness, flexibility and shearing power of the blades, but also to the ergonomic shape of the handle.

THE BLADES.
The convex shape of the blade provides effective support when considerable effort is required on the part of the user and is also characterized by: high hardness (54-56 HRC), good flexibility, high shearing power, long edge life, edge shape especially designed for professional use, and excellent ease of resharpening.

HANDLES.
Exclusive ergonomic design of the handle resulting from special studies carried out at qualified University Institutes (research unit called EPM: Ergonomics of Posture and Movement at the Polytechnic University of Milan) and validated by computerized experimental tests.

ANTIBACTERIAL PROTECTION
Sanelli and Biomaster have developed permanent antibacterial protection for the handles of Premana line knives through the use of silver ions.
Biomaster is a silver ion-based, inorganic additive suitable for imparting antibacterial characteristics to plastics that safely inhibits microbial growth from the first few minutes, reaching almost total inhibition within 24 hours. Once incorporated into a product, Biomaster becomes an integral part of it providing safe, effective and inexhaustible antimicrobial protection.
Laboratory tests have shown that Biomaster, incorporated into the handles of Sanelli Premana Professional Line knives, is effective in the permanent microbiological eradication of Escherichia Coli and Staphylococcus Aureus (MRSA) to the extent of 99.7 percent, obtaining ISO22196:20111 certification.

The Masahiro knives come directly from the city of Seki, Japan.

The quality of these Masahiro knives is very high and they are characterized by an asymmetric processing of the blades: the left side of the blade is flat, the other side of the knife is beveled up to the edge and then polished. This modern Japanese blade design translates into a superior cutting capacity.

The MV series is made of molybdenum vanadium stainless steel MBS-26 (similar to a Sandvik 19C27 or a 440C and predecessor of the VG-10). The handles are riveted to a full tang with thin layers of black-stained wood pressed into a transparent (but not polished) polyamide.

Recommended use: Vegetables

Country of production: Japan
Type of production: Industrial
Blade: Hitachi stainless steel MBS-26 at 58HRC
Handle: Synthetic, riveted
Blade length: 175mm.
Blade thickness: 2.5mm.
Total length: 300mm.
Weight: 115g.
Cleaning and maintenance: hand wash - not dishwasher safe

Production: Japan
Blade: in laminated steel with 6161 FCH cutting edge and 49-layer damask outer cheeks
Cut: symmetrical
Construction: forged
Handle: in micarta
Blade length: 160mm.
Recommended Use: vegetables, cured meats, meats

Notes: made in collaboration with Chef Rokusaburo Michiba

For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC. 

In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design. 

True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.

Shun Premier Tim Mälzer

Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 150 mm.
Handle length: 110 mm.
Blade thickness: 2 mm.
Total length: 285 mm.
Weight: 152 g.
Notes: not dishwasher safe

For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC. 

In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design. 

True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.

Shun Premier Tim Mälzer

Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 140 mm.
Handle length: 110 mm.
Blade thickness: 2 mm.
Total length: 275 mm.
Weight: 150 g.
Notes: not dishwasher safe

For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC. 

In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design. 

True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.

Shun Premier Tim Mälzer

Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 180 mm.
Handle length: 120 mm.
Blade thickness: 3 mm.
Total length: 315 mm.
Weight: 212 g.
Notes: not dishwasher safe

Blade: Japanese VG10 rolled steel in SanMai at 61 hrc
Handle: Black Pakkawood wood
Blade length: 180 mm.
Blade thickness: 2.2 mm.
Total length: 300 mm.
Weight: 206 g.
Notes: not dishwasher safe

Viper's Sakura Knives, designed by Jens Anso and Jesper Voxnaes, are a modern interpretation of the classic kitchen knife.

Featuring a hardening with a subsequent cryogenic finish to provide the best cutting and sealing properties, they have gorgeous Bocote Hot Wood Handles that adds character and sophistication to design.

Recommended uses: Vegetables, raw meat, fish
Country of Origin: Italy - Maniago (PN)
Blade material: Nitro-B 58 / 59HRC stainless steel
Handle material: Bocote stabilized wood
Blade length: 16cm
Blade thickness: 3mm
Design by Jens Anso & Jesper Voxnaes

The IKON Chef model is the main kitchen knife thanks to its versatility perfect for cutting, mincing, slicing and dicing. Thanks to its weight and balance, it is also perfect for heavy work such as cutting vegetables and thicker meats.

The jewel of the WÜSTHOF IKON collection has an attractive design handle made of Grenadill wood. Grenadill wood, or African Blackwood, is one of the hardest and heaviest woods in the world. IKON full-tang knives are precision forged from a single piece of unique high-carbon stainless steel.

Wusthof Ikon

Usage: meat, vegetables
Blade length: 170mm
Type: Forged
Steel: X50 Cr Mo V 15
Hardness: 58 HRC
Handle: African Blackwood
Washing: Manual - NOT DISHWASHER SAFE

Use: Ideal for cutting and portioning vegetables, for slicing raw meat or for cleaning fish.
Blade length: 20cm.

GLOBAL Japanese knives are the favorite of Chefs in the most prestigious hotels and restaurants in the world.

The first GLOBAL knife was designed in 1985 by Komin Yamada, who gave the knife he created a new and revolutionary design.

The main features of GLOBAL knives are:
- Lightness: GLOBAL was the first company in the world to make an empty steel knife in the handle. This feature allows you to reduce the weight of the knife by 30%.
- Manageability: thanks to the lightness and anatomical shape of the handle, GLOBAL knives lend themselves to continuous and prolonged times of use, minimizing user fatigue.
- Wire hold: GLOBAL knives are made using the best steels and the most modern manufacturing techniques. In the blades there is a high percentage of Molybdenum / Vanadium thanks to which the hardness of the steel reaches 56/58 Rockwell of hardness, consequently increasing the life of the wire.
- Sturdiness: being the GLOBAL knives completely in steel (both the handle and the blade) they are practically indestructible.
- Elegance

Awards acquired by GLOBAL knives:
1990 - Japanese Good Design by MITI
1991 - Selected for International Design Year Book
1992 - Selected as Best Cooks' Knife in Benelux
1995 - Selected as Best Knife by WHICH Magazine in the UK
1996 - Selected as Sharpest Knife by A LA CARTE Magazine in Germany

All Global products marketed by us are indelibly screen-printed with the Collini Cutlery logo (as in the image). This marking guarantees the buyer to have certainty about the quality, traceability, guarantee over the years and future privileged assistance on the product purchased from the Collini Cutlery

Production: Japan
Blade: laminate with sharp steel FC61 to 61HRC and damask outer cheeks to 49 layers
Cut: Symmetrical
Construction: Forged
Grip: micarta
Blade length: 180mm.
Recommended use: vegetables, sausages, meat, fish

Notes: developed in collaboration with Chef Rokusaburo Michiba

Production: Japan
Blade: laminate with sharp steel FC61 to 61HRC and damask outer cheeks to 49 layers
Cut: Symmetrical
Construction: Forged
Grip: micarta
Blade length: 240mm.
Recommended use: vegetables, meats,

Notes: developed in collaboration with Chef Rokusaburo Michiba

Production: Japan
Blade: laminate with sharp steel FC61 to 61HRC and damask outer cheeks to 49 layers
Cut: Symmetrical
Construction: Forged
Grip: micarta
Blade length: 200mm.
Recommended use: vegetables, meats,

Notes: developed in collaboration with Chef Rokusaburo Michiba

Recommended uses: Raw Meat, Vegetables
Country of Manufacture: Japan
Blade: Stainless steel laminate Cryodur Micro Carbide MC63 to 63HRC
Sharpening: A three phases, styled "Honbazuke"
Surface finish: Hammering mirror polished style "Tsuchime"
Blade length: 240mm
Blade Thickness: 2mm
Overall Length: 375mm
Weight: 250g.
Handle: pakkawood wood with mosaic pins, spacers brass and micarta and steel shank
Packaging: transparent plastic box with Miyabi logos
Maintenance: not dishwasher safe

Recommended uses: Raw Meat, Vegetables
Country of Manufacture: Japan
Blade: Stainless steel laminate Cryodur Micro Carbide MC63 to 63HRC
Sharpening: A three phases, styled "Honbazuke"
Surface finish: Hammering mirror polished style "Tsuchime"
Blade length: 160mm
Blade Thickness: 2mm
Overall Length: 270mm
Weight: 90g.
Handle: pakkawood wood with mosaic pins, spacers brass and micarta and steel shank
Packaging: transparent plastic box with Miyabi logos
Maintenance: not dishwasher safe

All-purpose knife for meat, vegetables and small fish.

Use: meat, fish, vegetables
Blade length: 13.5 cm.
Total Length: 25 Cm.
Weight: 92 gr.

GLOBAL Japanese knives are the favorite of Chefs in the most prestigious hotels and restaurants in the world.
The first GLOBAL knife was designed in 1985 by Komin Yamada, who gave the knife he created a new and revolutionary design.

The main features of GLOBAL knives are:
- Lightness: GLOBAL was the first company in the world to make an empty steel knife in the handle. This feature allows you to reduce the weight of the knife by 30%.
- Manageability: thanks to the lightness and anatomical shape of the handle, GLOBAL knives lend themselves to continuous and prolonged times of use, minimizing user fatigue.
- Wire hold: GLOBAL knives are made using the best steels and the most modern manufacturing techniques. In the blades there is a high percentage of Molybdenum / Vanadium thanks to which the hardness of the steel reaches 56/58 Rockwell of hardness, consequently increasing the life of the wire.
- Sturdiness: being the GLOBAL knives completely in steel (both the handle and the blade) they are practically indestructible.
- Elegance
Awards acquired by GLOBAL knives:

1990 - Japanese Good Design by MITI
1991 - Selected for International Design Year Book
1992 - Selected as Best Cooks' Knife in Benelux
1995 - Selected as Best Knife by WHICH Magazine in the UK
1996 - Selected as Sharpest Knife by A LA CARTE Magazine in Germany

All Global products marketed by us are indelibly screen-printed with the Collini Cutlery logo (as in the image). This marking guarantees the buyer to have certainty on the quality, traceability, guarantee over the years and future privileged assistance on the product purchased from Coltelleria Collini.

A knife developed primarily for cutting vegetables.

Use: Vegetable
Blade length: 16 Cm.
Total Length: 28 Cm.

Japanese GLOBAL knives are the favorite of Chefs in the most prestigious hotels and restaurants in the world. The first GLOBAL knife was designed in 1985 by Komin Yamada, who gave the knife he created a new and revolutionary design.

The main features of GLOBAL knives are:
- Lightness: GLOBAL was the first company in the world to make an empty steel knife in the handle. This feature allows you to reduce the weight of the knife by 30%.
- Manageability: thanks to the lightness and anatomical shape of the handle, GLOBAL knives lend themselves to continuous and prolonged times of use, minimizing user fatigue.
- Wire hold: GLOBAL knives are made using the best steels and the most modern manufacturing techniques. In the blades there is a high percentage of Molybdenum / Vanadium thanks to which the hardness of the steel reaches 56/58 Rockwell of hardness, consequently increasing the life of the wire.
- Sturdiness: being the GLOBAL knives completely in steel (both the handle and the blade) they are practically indestructible.
- Elegance

Awards acquired by GLOBAL knives:
1990 - Japanese Good Design by MITI
1991 - Selected for International Design Year Book
1992 - Selected as Best Cooks' Knife in Benelux
1995 - Selected as Best Knife by WHICH Magazine in the UK
1996 - Selected as Sharpest Knife by A LA CARTE Magazine in Germany
GLOBAL Japanese knives are the favorite of Chefs in the most prestigious hotels and restaurants in the world.
The first GLOBAL knife was designed in 1985 by Komin Yamada, who gave the knife he created a new and revolutionary design.

No kitchen should be without this manual food processor. It is the most essential of all knives used in the kitchen.

Slicing, mincing, dicing of all kind of food. Perfectly balanced, an extension of your hand.

Extra wide. Precision forged from a single blank of steel with bolster and full tang.

Ergonomic handle design developed in consultation with professional chefs. Full bolster/finger guard for safety and protection.

Caution: cook´s knives purposely have been ground extra thin for the ultimate cutting performance. Chopping through bones will damage the fine edge.

- Blade of 20 cm - max height of the blade 5.5 cm

- Total length 33 cm

- Weight 280 gr.

Type: Chef's Knife
Recommended Uses: Cutting and preparing vegetables / Precision cutting of white meat and fish
Blade Type: Forged
Steel: Friodur Sigmaforge, 58/59 HRC
Blade Length: 180mm. 
Handle: Black synthetic material, riveted

• A PERFECT LINE
For those who value high-quality “Made in Germany” products, the ZWILLING PRO series is the best choice. Whether for professionals or cooking enthusiasts: ZWILLING PRO knives are the perfect blend of innovation, traditional design, and absolute precision. From paring knives to Santoku knives, this series offers blades suitable for every kitchen task.
A collection designed to meet all the needs of a modern kitchen: exceptional quality and a perfect design.

• QUALITY
The exclusive composition of ZWILLING J.A. HENCKELS steel strikes the perfect balance between chromium and carbon content: the secret to premium-quality steel. Knives bearing the FRIODUR brand are the result of a special cryogenic hardening treatment that enhances their quality. They retain their sharpness exceptionally well, are particularly corrosion-resistant, and flexible.

• FUNCTIONALITY:
The blade is perfectly sharpened along its entire length, allowing you to cut from the tip to the bolster. The type of sharpening meets both European and Japanese cutting traditions.

• PRECISION:
SIGMAFORGE-branded knives are precision-forged from a single piece of steel, ensuring perfect geometry. This is a fundamental requirement for precision sharpening and optimal cutting performance.

• HANDLING:
The wedge-shaped geometry of the blade provides exceptional stability and effortless cutting; the curved shape of the bolster ensures safe and precise use.

• STRENGTH:
A classic for professional kitchens. The 3-rivet design with a seamless tang is synonymous with perfect balance.

Type: Carving Knife / From Cook
Recommended Uses: raw meat, fish cleaning and cutting vegetables
Type Blade: Forged
Steel: Friodur SIGMAFORGE 58 / 59HRC
Blade length: 200mm.
Handle: black plastic, riveted


• A PERFECT LINE
For those who give importance to the high quality "Made in Germany", the series ZWILLING PRO is the best choice. Both for professionals and for those who love cooking: knives ZWILLING PRO is the perfect combination of innovation, traditional design and absolute precision. By Paring knife Santoku, this series offers blades suitable for all uses in the kitchen.
A collection to meet all needs in a modern kitchen: a great quality and a perfect line.

• QUALITY
The unique composition of the steel ZWILLING JA HENCKELS is the perfect balance of chromium and carbon: the secret to a high-quality steel. The knives with brand FRIODUR are the product of a special hardener cryogenic treatment that improves the quality. They have exceptional cutting, are especially corrosion-resistant and flexible.

• FEATURES:
The clean blade over the entire length allows to cut from the tip up to the node. The type of sharpening satisfies both the tradition of cutting European and Japanese.

• PRECISION:
The knives with the brand SIGMAFORGE are obtained by precision forging starting from a single piece of steel, for a perfect geometry. The basic requirement for sharpness and precision for the best cutting properties.

• HANDLING:
The wedge-shaped geometry of the blade enables an extraordinary stability and an easy cut; the curved shape of the node ensures reliable and accurate.

• HIGHLIGHT:
A classic for the professional kitchen. The 3-rivet design with tang seamless stands for perfect balance.

Type: Carving Knife / From Cook
Recommended Uses: raw meat, fish cleaning and cutting vegetables
Type Blade: Forged
Steel: Friodur SIGMAFORGE 58 / 59HRC
Blade length: 200mm.
Handle: black plastic, riveted


• A PERFECT LINE
For those who give importance to the high quality "Made in Germany", the series ZWILLING PRO is the best choice. Both for professionals and for those who love cooking: knives ZWILLING PRO is the perfect combination of innovation, traditional design and absolute precision. By Paring knife Santoku, this series offers blades suitable for all uses in the kitchen.
A collection to meet all needs in a modern kitchen: a great quality and a perfect line.

• QUALITY
The unique composition of the steel ZWILLING JA HENCKELS is the perfect balance of chromium and carbon: the secret to a high-quality steel. The knives with brand FRIODUR are the product of a special hardener cryogenic treatment that improves the quality. They have exceptional cutting, are especially corrosion-resistant and flexible.

• FEATURES:
The clean blade over the entire length allows to cut from the tip up to the node. The type of sharpening satisfies both the tradition of cutting European and Japanese.

• PRECISION:
The knives with the brand SIGMAFORGE are obtained by precision forging starting from a single piece of steel, for a perfect geometry. The basic requirement for sharpness and precision for the best cutting properties.

• HANDLING:
The wedge-shaped geometry of the blade enables an extraordinary stability and an easy cut; the curved shape of the node ensures reliable and accurate.

• HIGHLIGHT:
A classic for the professional kitchen. The 3-rivet design with tang seamless stands for perfect balance.

What a chef's knife is for European kitchens, the Santoku knife is for Japan and all of Asia: so versatile in shape, weight and blade that it can be used to grind and mince herbs, vegetables and fruit, as well as to prepare fish and meat. The sharp blade of the Santoku allows for both regular cuts and very thin cuts - it is therefore now indispensable in all kitchens in the world.

Forged series
- 14 cm blade (total length 25.5 cm), weight 140 gr.

The Handles: made of synthetic material and joined with a triple riveting ensure a perfect seal, excellent stability and guarantee dishwasher safe.
The Blades: are obtained using the best steels and combining the most qualified elements (chromium 15% - carbon 0.5% - molybdenum - vanadium).
The realization of a WUSTHOF forged knife requires the passage of about 40 processing cycles.

Maintenance

Proper maintenance prolongs the life of the knife, makes work easier and safer and reduces the consumption of the wire. Some advices:

- Pay attention that the knives placed in the dishwasher bump other objects; the blades could be damaged.

- Knives guaranteed for dishwashers that are not immediately washed in the machine should be rinsed under the water tap to remove the remains of highly corrosive foods (fats, vinegar, fruit juices).

- Make sure if the knives no longer cut perfectly, have them rectified or sharpened by professionals in the sector.

The WUSTHOF knives sold by us are personally checked and further sharpened, in order to guarantee you the certainty of an excellent purchase.

All Wusthof products we sell are indelibly silk-screened with the Coltelleria Collini logo (as shown in the image). This marking guarantees the purchaser to have the certainty of quality, traceability, guarantee over the years and a future privileged assistance on the product purchased from Coltelleria Collini.

The innovative series Seki Magoroku Composite has 8 types of symmetrical blades. The blade, beautifully finished, the union of two different types of steel that create a fascinating contrast. The central part of the blade, polished, stainless steel is VG-MAX with a hardness of 61 ± 1 HRC, while the exterior is satin steel SUS420J2 to altissio chromium content.

The production process of the blades Composite is based on a new technology used in aircraft construction and ensures a high resistance over that extreme precision. The two types of steel are joined together by one particular welding process to the copper, and the thin line of copper that remains visible between the two steels adds a further touch of elegance to the design.

The grip is tapered in a light shade of pakkawood. The shape of the reason diagonally give these masterpieces lightness and movement.

Lama: laminate, stainless steel VG-MAX to 61HRC and 420J2, welded copper center
Handle: Wood Pakkawood clear
Blade length: 165 mm.
Blade thickness: 2.5 mm.
Overall length: 285 mm.
Weight: -
Notes: not dishwasher safe

The innovative series Seki Magoroku Composite has 8 types of symmetrical blades. The blade, beautifully finished, the union of two different types of steel that create a fascinating contrast. The central part of the blade, polished, stainless steel is VG-MAX with a hardness of 61 ± 1 HRC, while the exterior is satin steel SUS420J2 to altissio chromium content.

The production process of the blades Composite is based on a new technology used in aircraft construction and ensures a high resistance over that extreme precision. The two types of steel are joined together by one particular welding process to the copper, and the thin line of copper that remains visible between the two steels adds a further touch of elegance to the design.

The grip is tapered in a light shade of pakkawood. The shape of the reason diagonally give these masterpieces lightness and movement.

Lama: laminate, stainless steel VG-MAX to 61HRC and 420J2, welded copper center
Handle: Wood Pakkawood clear
Blade length: 200 mm.
Blade thickness: 2.5 mm.
Overall length: 320 mm.
Weight: -
Notes: not dishwasher safe

Mini Santoku with alveoli, ideal for cutting any food (fish, meat or vegetables).
The blade has grooves that allow excellent cutting smoothness, without the food going
glue to the blade.

Blade length: 11cm
Total length: 23 cm
Weight: 82

GLOBAL Japanese knives are the favorite of Chefs in the most prestigious hotels and restaurants in the world.
The first GLOBAL knife was designed in 1985 by Komin Yamada, who gave the knife he created a new and revolutionary design.

The main features of GLOBAL knives are:
- Lightness: GLOBAL was the first company in the world to make an empty steel knife in the handle. This feature allows you to reduce the weight of the knife by 30%.
- Manageability: thanks to the lightness and anatomical shape of the handle, GLOBAL knives lend themselves to continuous and prolonged times of use, minimizing user fatigue.
- Wire hold: GLOBAL knives are made using the best steels and the most modern manufacturing techniques. In the blades there is a high percentage of Molybdenum / Vanadium thanks to which the hardness of the steel reaches 56/58 Rockwell of hardness, consequently increasing the life of the wire.
- Sturdiness: being the GLOBAL knives completely in steel (both the handle and the blade) they are practically indestructible.
- Elegance
Awards acquired by GLOBAL knives:

1990 - Japanese Good Design by MITI
1991 - Selected for International Design Year Book
1992 - Selected as Best Cooks' Knife in Benelux
1995 - Selected as Best Knife by WHICH Magazine in the UK
1996 - Selected as Sharpest Knife by A LA CARTE Magazine in Germany

All Global products marketed by us are indelibly screen-printed with the Collini Cutlery logo (as in the image). This marking guarantees the buyer to have certainty on the quality, traceability, guarantee over the years and future privileged assistance on the product purchased from Coltelleria Collini.