Collection Knives: For Knife Collectors and Custom Knife Enthusiasts

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

PREVIOUSLY PURCHASED AND USED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased and used
* Condition: Good overall condition, with evident signs of age and use
* Commercial availability: Discontinued
* Sharpening: Resharpened
* Marks on blade: Present, with scratches, abrasions and surface dulling consistent with age and use
* Marks on handle: Present, with natural patina and signs of use on the stacked leather washers
* Box: -
* Sheath: Present, original leather sheath, heavily used and showing signs of age
* Manuals, Certificates and Warranties: -
* Inspected and Certified by our in-house laboratory

The SOG S1 Bowie Vietnam 5th Special Forces Group is one of the most representative knives in the history of SOG Specialty Knives and the model with which the American brand began its production during the second half of the 1980s. Made in Seki, Japan, the S1 was created as a tribute to the famous knives used by members of the Military Assistance Command, Vietnam – Studies and Observations Group (MACV-SOG) during the Vietnam War.

It is important to distinguish the S1 from the original “sterile” military knives actually used operationally during the conflict: the commercial SOG model instead reproduces the commemorative configuration of the famous MACV-SOG Bowie, featuring the U.S. Army Special Forces crest on the blade together with the marking “VIETNAM 5th SPECIAL FORCES GROUP”. This strong historical identity, combined with the quality of Japanese manufacturing, has made it one of the most recognizable and sought-after vintage SOG knives among collectors.

Production was entrusted to Ichiro Hattori in Seki, one of the most important names in Japanese knifemaking. The substantial Bowie blade is made from SK-5 carbon steel, hardened to approximately 57-58 HRC, with the characteristic dark gun-blue finish combined with polished surfaces. The handle uses traditional stacked leather washers stabilized with epoxy resin, completed by a sturdy metal guard and pommel.

This example features the classic SOG Specialty Knives logo on one side of the ricasso and, on the opposite side, the markings “SEKI-JAPAN”, the Special Forces crest and the inscription “VIETNAM 5th SPECIAL FORCES GROUP”. It is also accompanied by its original black leather sheath, complete with sharpening stone pocket and a large Special Forces crest embossed on the lower section. The original period identification label is still present on the back of the sheath.

The example offered here comes from a private collection and has actually been used. The blade shows scratches, abrasions and surface marks, both on the blued and polished areas; the leather handle has developed a noticeable patina and shows wear consistent with its age. The original sheath is also heavily used, with leather wear, marks and widespread abrasions. Its condition should therefore be considered good in relation to its age and nature, but it should not be compared with a display-grade or NOS example.

These very characteristics tell the story of an authentic SOG S1 made in Seki: a knife that, regardless of its cosmetic condition, retains all the appeal of one of the founding models of the brand and today represents a particularly significant piece for a collection dedicated to American military knives and Japanese SOG production from the 1980s and 1990s.

Intended use: Military / Collection
Production type: Industrial
Model: S1 Bowie - Vietnam 5th Special Forces Group
Country of manufacture: Seki - Japan
Model production period: 1986 - 2005
Blade: SK-5 carbon steel
Hardness: 57-58 HRC
Blade finish: Gun-blue / polished
Blade profile: Bowie
Edge: Plain
Handle: Stacked leather washers stabilized with epoxy resin
Guard and pommel: Metal
Blade length: Approx. 159mm
Blade thickness: Approx. 7.1mm
Overall length: Approx. 273mm
Weight: Approx. 349g
Sheath: Original black leather sheath with sharpening stone pocket and Special Forces crest
Notes: Previously purchased and used knife, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; has minor scuffs on the tip of the blade and on the spine of the knife
* Commercial Availability: Discontinued in this configuration
* Sharpening: Factory-sharpened
* Marks on blade: Minor scuffs on the tip of the blade and the spine of the knife
* Marks on handle: None
* Box: Missing
* Sheath: Present and in good condition
* Manuals, Certificates, and Warranties: Missing
* Inspected and certified by our in-house laboratory

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has given rise to the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended Use: Collectible / Utility

Manufacturing Type: Midtech
Country of Manufacture: Boise, Idaho, USA
Blade: CPM-S35VN steel
Surface Treatment: CeraKote
Handle: Black Canvas Micarta
Blade Length: 150 mm.
Blade thickness: 5.58 mm.
Overall length: 292 mm.
Balance: on the lower guard
Weight: 329 g.
Sheath: Nylon thigh sheath, M.O.L.L.E.-compatible
Notes: Previously purchased knife—from a private collection

The Socom Delta represents the modern evolution of a Microtech icon, setting extremely high standards in the world of tactical and utility knives. A direct descendant of the legendary Socom introduced in 1996, the Delta carries on its legacy while taking it to the next level in terms of ergonomics, durability, and operational versatility. Available with a clip-point or tanto blade, it guarantees top-notch performance in any situation. The integrated glass breaker at the base of the handle and the large pivot, which allows for easy opening even while wearing gloves, reinforce its professional appeal. Its rugged reliability makes it a top choice even in the most demanding environments, now featuring RAM-LOK technology.

This rugged reimagining of the crossbar lock features Microtech’s signature stepped pattern, made famous by the Ultratech series’ activation switches. The blade’s wide cutout provides space for reverse middle-finger movements and for the standard slow-rotation thumb opening, with or without gloves. If neither of these is preferred, simply pull down the RAM-LOK and the blade opens with a simple flick of the wrist. The aluminum handles are slightly textured, offering excellent grip potential for both standard and reverse grips. 

Intended Use: Tactical / Military / Collectible

Manufacturing Type: Midtech
Country of Manufacture: USA
Blade: M390MK stainless steel, 60-61 HRC
Blade finish: Standard (Dual Tone, Satin, and Cerakote)
Handle: Frag Pattern aluminum with Cerakote finish
Blade length: 101 mm
Blade thickness: 3.5 mm
Closed length: 129 mm
Overall length: 233 mm
Closed thickness: 14mm.
Weight: 152g.
Lock: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: Stainless steel, removable and reversible (tip-up)
Packaging: Cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition
* Commercial Availability: Discontinued in this steel variant
* Sharpness: Factory-sharpened
* Marks on blade: None
* Marks on handle: Minor cosmetic signs of wear on the clip and screws
* Box: Included
* Sheath: -
* Manuals, Certificates, and Warranties: Included
* Inspected and certified by our in-house laboratory

The Microtech Socom Elite is one of the most iconic folding knives produced by Microtech, prized for its combination of durability, ergonomics, and reliability. Designed for professional and tactical use, over the years it has also established itself as a benchmark among collectors and enthusiasts of high-end cutlery.

The model presented here, manufactured in 2019, features a blade made of Carpenter CTS-204P steel, one of the best high-performance stainless steel alloys in its class, known for its excellent edge retention, high corrosion resistance, and outstanding wear resistance. The black/dual-tone finish contributes to its particularly aggressive and professional appearance.

The aluminum handle with non-slip inserts ensures a firm and comfortable grip even under the most demanding conditions, while the manual thumb stud opening system and the proven liner lock mechanism guarantee quick deployment and safety during use.

Thanks to Microtech’s signature build quality and a design that has become an industry classic, the Socom Elite is an excellent choice for both everyday use and for collectors seeking one of the most iconic models in the American brand’s modern lineup.

Intended Use: Tactical, EDC

Production Type: Industrial
Country of Manufacture: USA
Blade: Carpenter CTS-204P stainless steel
Blade Finish: “Normal” (Black PVD + Satin)
Handle: Aluminum with non-slip inserts
Blade Length: 101mm
Blade thickness: 4 mm
Closed length: 127 mm
Overall length: 228 mm
Closed thickness: 15 mm
Weight: 157 g
Lock type: Liner Lock
Clip: Stainless steel, removable
Packaging: Microtech box with manuals
Notes: Previously purchased knife, from a private collection

The new Gold Class 491BK-261 Lowden represents the most exclusive iteration of the Lowden platform. A high-performance knife that pays homage to the great achievements of American aeronautics in the space age, combining sophisticated design, advanced technologies, and craftsmanship of the highest caliber.

Built on a 6Al-4V titanium frame with a black DLC finish, it is enhanced by marbled carbon fiber inserts, which add depth and movement to the structure. The gold-plated steel bolster introduces an elegant and distinctive contrast, inspired by the canopy of the F-22 Raptor fighter jet.

The spear-point blade is crafted from exclusive Drakkar Damasteel, a 72-layer Damascus steel that reveals its complexity through the bevel’s finish and a deep acid etching, which highlights a fluid and dynamic pattern. The result is a cohesive ensemble of premium materials and finishes. The 72-layer Damasteel offers a rich, layered visual depth, while the DLC (Diamond-Like Carbon) coating combines protection with a technical aesthetic.

From a mechanical standpoint, the Lowden platform stands out for its fluidity and precision. The ball-bearing-mounted flipper opening mechanism ensures rapid and controlled movement, while the AXIS Lock system provides a secure closure and a solid, consistent feel during use.

The Gold Class 491BK-261 Lowden combines advanced engineering, premium materials, and an aesthetic inspired by the aerospace industry, resulting in a balanced, refined, and highly distinctive creation.

Intended Use: Collector’s Item

Production Type: Industrial
Country of Manufacture: USA
Blade: 72-layer Drakkar stainless Damascus steel by Damasteel
Blade finish: Black DLC
Handle: Anodized 6061-T6 aluminum, marbled carbon fiber, gold-plated steel end caps
Blade length: 70.9 mm.
Blade thickness: 2.3 mm.
Closed length: 102 mm.
Overall length: 173 mm.
Thickness when closed: 12.75 mm.
Weight: 97.8 g.
Lock: AXIS Lock
Clip: Removable and reversible, machined from solid titanium
Packaging: Cardboard box with Benchmade logos
Notes: Limited-edition Gold Class, produced in a run of only 250 units and available exclusively at select retailers

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Knife manufactured in 2010, acquired from a private individual, previously purchased
* Condition: Overall in excellent condition, with some signs of wear, especially on the sheath
* Available on the market: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: A few small signs of wear, visible against the light
* Marks on the handle: None
* Box: Present and complete
* Sheath: Present, with some minor signs of wear that do not compromise its use
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our in-house laboratory

Discontinued and increasingly difficult to find, the Chris Reeve Nyala is considered one of the most iconic and highly regarded fixed-blade knives in the Chris Reeve Knives lineup. Originally designed as a versatile hunting and outdoor knife, it represents one of the most successful interpretations of the modern field knife, combining clean lines, excellent ergonomics, and a full-tang construction designed to ensure absolute reliability.

Crafted from CPM S35VN steel and finished to the exceptionally high quality standards that have made the brand famous, the Nyala offers benchmark cutting performance, great durability, and a versatility that makes it ideal for outdoor use as well as for hunting.

Produced until 2020, the Nyala perfectly embodies Chris Reeve’s design philosophy: eliminating the superfluous to create a functional, durable, and uncompromising tool. Today, its limited availability on the market further enhances its appeal, making it one of the most sought-after models among both brand enthusiasts and collectors of contemporary custom and semi-custom knives.

Intended Use: Hunting/Sporting

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-S35VN stainless steel, 58/59 HRC
Blade Finish: Stonewashed
Handle: Brown canvas Micarta
Blade Length: 95mm.
Blade thickness: 4.5mm.
Overall length: 216mm.
Weight: 175g.
Sheath: Brown leather by G. Feller Casemakers
Packaging: Cardboard box with Chris Reeve logos; warranty certificates
Notes: 2010 knife previously purchased, from a private collection, full set

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in excellent condition
* Commercially available: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: None
* Marks on handle: Minor signs of wear on the carbon fiber scales, visible mainly against the light
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: Included
* Inspected and certified by our in-house laboratory

Intended use: sports / collection

Production type: industrial
Country of manufacture: Seki - Japan
Blade: ZDP-189 stainless steel, 67 HRC
Blade finish: Satin
Handle: Carbon fiber with stainless steel liners
Blade length: 70 mm.
Blade thickness: 2.5mm.
Closed length: 93mm.
Total length: 157mm.
Weight: 55g.
Closure: Liner Lock
Clip: Stainless steel, removable
Notes: Designed by Michael Walker - Sprint Run edition available only in 2010 - Withdrawn from a private collection, complete with box and manuals

Notes on the Designer

Michael Walker is to the knife industry what Michael Jordan is to basketball or Wayne Gretzky is to hockey. He shattered established standards, venturing into uncharted territory and elevating the art of knife-making to new heights of innovation and modernity.

In 1980, the folding knife industry had few locking innovations, and only the traditional Back Lock existed. In 1981, Walker invented, developed, and ultimately trademarked the Michael Walker LinerLock®, adding a leaf spring that locked the blade open, making it a true one-handed folding knife. He also included a latch to keep the blade closed by utilizing the force of the internal leaf spring, preventing it from opening in the user’s pocket.

This innovation paved the way for modern cutlery, enabling numerous new designs and future developments leading up to today’s SubFrame Lock, Frame Lock, Flipper Folder, and ball-bearing-equipped IKBS opening systems.

Other inventions include the “Lake and Walker Safety System” (LAWKS), BLADELock, Ball Bearing Lock, and Tough Lock.

Some of the manufacturers he has collaborated with include Spyderco, Columbia River Knife and Tool, Schrade, Böker, and Klotzli.

Walker’s knives and designs have inspired many other custom knife makers, notably Bob Terzuola and Ernest Emerson. Terzuola credits Walker with teaching him how to make a liner-lock folder, and Emerson has stated that seeing one of Walker’s knives at a gun show inspired him to become a knifemaker.

Walker’s knives can be found at the Artifex Gallery in Taos and in the most prestigious collections around the world.

The Socom Delta represents the modern evolution of a Microtech icon, setting extremely high standards in the world of tactical and utility knives. A direct descendant of the legendary Socom introduced in 1996, the Delta carries on its legacy while taking it to the next level in terms of ergonomics, durability, and operational versatility. Available with a clip-point or tanto blade, it guarantees top-notch performance in any situation. The integrated glass breaker at the base of the handle and the large pivot, which allows for easy opening even while wearing gloves, reinforce its professional appeal. Its rugged reliability makes it a top choice even in the most demanding environments, now featuring RAM-LOK technology.

This rugged reimagining of the crossbar lock features Microtech’s signature stepped pattern, made famous by the Ultratech series’ activation switches. The blade’s wide cutout provides space for reverse middle-finger movements and for the standard slow-rotation thumb opening, with or without gloves. If neither of these is preferred, simply pull down the RAM-LOK and the blade opens with a simple flick of the wrist. The aluminum handles are slightly textured, offering excellent grip potential for both standard and reverse grips. 

Intended Use: Tactical / Military / Collectible

Manufacturing Type: Midtech
Country of Manufacture: USA
Blade: M390MK stainless steel, 60-61 HRC
Blade finish: Standard (Dual Tone, Satin, and Black PVD)
Handle: Frag Pattern aluminum with Cerakote finish
Blade length: 101 mm
Blade thickness: 3.5 mm
Closed length: 129 mm
Overall length: 233 mm
Closed thickness: 14mm.
Weight: 152g.
Lock: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: Stainless steel, removable and reversible (tip-up)
Packaging: Cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

The artisanal Mozzetta by Piscitelli represents the perfect blend of Italian tradition and everyday functionality, an accessory with authentic charm designed for those who appreciate objects crafted with care and character. Entirely produced in Frosolone (IS), the historic center of Molise cutlery, this Mozzetta preserves the essential style of traditional Italian knives, reinterpreted through natural materials and high-quality artisanal craftsmanship.

The elegant olive wood handle makes each piece unique in hue and grain, while the compact and harmonious design enhances its practicality and portability. The satin-finished stainless steel blade, with its clean and traditional profile, offers reliability for daily use and gives the knife a understated yet distinctive aesthetic, ideal for both enthusiasts and collectors alike.

Compact and lightweight, the Piscitelli pocket knife is a small symbol of Italian artisanal culture: a simple, authentic, and timeless knife, capable of accompanying every moment of the day with style, from outdoor life to the most informal social gatherings.

Intended use: Collectible / Sports use

Production type: Handcrafted
Country of origin: Italy (Frosolone, IS)
Blade: 420 stainless steel
Blade finish: Satin
Handle: Olive wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Closed length: 108 mm.
Total length: 194 mm.
Weight: 49 g.
Closure: No locking mechanism / free-floating blade
Packaging: Cardboard box with manufacturer’s logos and information sheet
Notes: Each horn handle is unique in grain and color; as it is handcrafted, there may be aesthetic variations

The Socom Delta represents the modern evolution of a Microtech icon, setting extremely high standards in the world of tactical and utility knives. A direct descendant of the legendary Socom introduced in 1996, the Delta carries on its legacy while taking it to the next level in terms of ergonomics, sturdiness, and operational versatility. Available with a clip-point or tanto blade, it guarantees top-notch performance in any situation. The integrated glass breaker at the base of the handle and the large pivot, which allows for easy opening even while wearing gloves, reinforce its professional appeal. Its rugged reliability makes it a top choice even in the most demanding environments, now featuring RAM-LOK technology.

This rugged reimagining of the crossbar lock features Microtech’s signature stepped pattern, made famous by the Ultratech series’ activation switches. The blade’s wide cutout provides space for reverse movements of the middle finger and for the standard slow-rotation thumb opening, with or without gloves. If neither of these is preferred, simply pull down the RAM-LOK and the blade opens with a simple flick of the wrist. The aluminum handles are slightly textured, offering excellent grip potential for both standard and reverse grips. 

Intended Use: Tactical / Military / Collectible

Manufacturing Type: Midtech
Country of Manufacture: USA
Blade: M390MK stainless steel, 60-61 HRC
Blade finish: Apocalyptic
Handle: Anodized aluminum
Blade length: 101 mm
Blade thickness: 3.5 mm
Closed length: 129 mm
Overall length: 233 mm
Closed thickness: 14mm.
Weight: 152g.
Lock: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: Stainless steel, removable and reversible (tip-up)
Packaging: Cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Structure intact, no functional compromises, fully operational and ready for use. Presence of slight surface marks on the finish and signs of age.
* Available on the market: Discontinued
* Sharpening: Factory-sharpened
* Marks on blade: Slight surface marks on the finish
* Marks on handle: None
* Box: /
* Sheath: Nylon, belt-mounted
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

This Mick Strider-signed BT model features a black blade with a knurled thumb rest, a thickness of 6.4mm, and a full-tang construction to ensure maximum strength and durability.

The handle features green MEFP scales with a lanyard hole and an integrated pry bar on the back. Comes complete with a nylon sheath with a belt loop.

Strider Knives

Founded and run by former military personnel, Strider Knives is a company specializing in the development of cutting tools designed to withstand the most extreme operating conditions. The initial goal was to create a reliable utility knife, built with the highest quality materials yet affordable and easy to maintain by field personnel.

Over time, the brand has established itself as a benchmark in the world of tactical and professional knives, thanks to models developed specifically to meet the needs of military personnel, law enforcement, special operations personnel, hunters, and professional divers. Every design stems from a practical and functional approach, focused on maximum durability and reliability in the field.

Intended Use: Tactical / All-Rounder Utility

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-3V crucible steel
Blade Finish: Black Coating
Handle: G10
Blade length: 161mm.
Blade thickness: 6.4mm.
Overall length: 308mm.
Balance: rear-weighted
Weight: 410g.
Sheath: Nylon, belt-mounted
Packaging: -
Notes: Previously purchased knife, from a private collection

The No. 08 Horizon is a durable pocket knife designed for all multisport activities. With its understated design and natural inspiration, the No. 08 Horizon Khaki is the ideal companion for all your outdoor adventures.

Sturdy and practical, it is designed for outdoor enthusiasts looking for a versatile tool suitable for all their activities: hiking, camping, mountain biking, or canoeing.

The N°08 Horizon Khaki features an 8 cm smooth stainless steel blade characterized by high corrosion resistance and excellent cutting quality. Its polyamide handle, reinforced with 30% fiberglass, is water-resistant and withstands extreme temperatures. It features a built-in 110dB emergency whistle and a lanyard hole for hanging the knife wherever you like.

Intended use: Hiking / Sports

Production type: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin
Handle: Polyamide with anti-slip treatment
Blade length: 85mm.
Blade thickness: 2.5 mm.
Closed length: 110 mm.
Total length: 190 mm.
Closed thickness: 20 mm.
Weight: 63 g.
Closure: ViroBloc
Packaging: Cardboard and plastic blister pack
Notes: equipped with a 110 dB emergency whistle

The Socom Delta represents the modern evolution of a Microtech icon, setting extremely high standards in the world of tactical and utility knives. A direct descendant of the legendary Socom, launched in 1996, the Delta takes its legacy to the next level in terms of ergonomics, solidity, and operational versatility. Available with a clip point or tanto blade, it guarantees absolute performance in any context. The integrated glass breaker at the base of the handle and the large pivot, which allows for easy opening even when wearing gloves, reinforce its professional vocation. Its robust reliability makes it a preferred choice even in the most demanding environments, now with RAM-LOK technology.

This robust reinterpretation of the crossbar closure features Microtech's characteristic stepped pattern, made famous by the Ultratech series of operating switches. The wide blade cutout provides space for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down the RAM-LOK and the blade opens with a simple flick of the wrist. The aluminum handles are slightly textured to provide excellent grip potential with both standard and reverse grips. 

Limited edition “Marfione Select” with handle made entirely of solid titanium with a stonewashed finish, rear spacer in blue double vapor blast anodized titanium. The knife comes with a microfiber pouch, a microfiber cleaning cloth, and a stainless steel warranty certificate autographed by Marfione himself.

Intended use: Tactical / Military / Collectible

Type of production: Midtech
Country of production: USA
Blade: M390MK stainless steel 60-61HRC
Blade finish: Stonewashed
Handle: Titanium Slab Stonewashed
Blade length: 101mm.
Blade thickness: 3.5mm.
Closed length: 129mm.
Total length: 233mm.
Closed thickness: 14mm.
Weight: 153g.
Closure: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up) with Marfione's signature
Packaging: cardboard box with Microtech USA and “Signature Series” logos
Notes: Design by Anthony Marfione - Limited edition collector's item accompanied by a microfiber pouch, a microfiber cleaning cloth, and a stainless steel warranty certificate autographed by Marfione.

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Like new
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: None
* Marks on handle: None
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: Included
* Inspected and Certified by our in-house laboratory

The SOG Forge FG01-L is a knife of extraordinary beauty and build quality, combining Japanese craftsmanship with modern production techniques.

The blade, forged using a hammering technique, features a unique texture that is one-of-a-kind for each piece. It is made of San Mai steel, with a VG-10 cutting edge and 420J2 outer layers, a combination that ensures an excellent balance between sharpness, edge retention, and durability.

The glass-reinforced nylon (GRN) handle is designed with perfectly contoured inserts to provide optimal balance and a secure, comfortable grip. The knife is complemented by an elegant premium leather sheath, enhanced with a colored fabric insert and a button closure.

Manufactured in Japan, the SOG Forge FG01-L evokes an era when honor and master craftsmanship were fundamental values. An object that is not merely a tool, but a true collector’s item destined to stand the test of time and be passed down from generation to generation.

Intended Use: Collectible / Sport

Production Type: Industrial
Country of Origin: Seki - Japan
Blade: SanMai laminated stainless steel with a VG-10 cutting edge and 420J2 outer layers, featuring a concave grind
Blade Finish: Hammered and Brut de Forge with a satin-finished portion of the cutting edge
Handle: Three-dimensionally shaped GRN (Glass Reinforced Nylon)
Blade Length: 160mm.
Blade thickness: 5 mm.
Overall length: 275 mm.
Weight: 290 g.
Sheath: Leather, with an insert of fine Japanese fabric, which varies from sheath to sheath
Packaging: Cardboard box with SOG logos
Notes: Knife from a private collection, previously purchased

This knife was previously purchased and comes from a private collection
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in good condition, with some signs of age and a couple of small scratches on the tip of the blade
* Currently available: Currently in the catalog with Desert Ironwood and a stainless steel guard
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: A couple of small scratches on the tip of the knife, possibly due to product handling
* Marks on handle: None
* Box: Present, shows signs of age
* Sheath: Present, like new
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

The “Tre Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family. In fact, these knives are the only ones that bear the royal symbol of the three crowns on the blade and on the beautiful wooden box that contains the knife and sheath.

The laminated steel used is currently one of the finest industrial steels on the market and consists of an inner layer of 62HRC powder-molded SGPS paired with two outer layers of VG2. The knives thus exhibit exceptional cutting performance, penetration, and edge retention.

Intended Use: Hunting / All-rounder Utility

Production Type: Industrial
Country of Manufacture: Sweden
Blade: 3G laminated stainless steel with a 62 HRC SGPS cutting edge
Blade Finish: Satin
Handle: Riveted cocobolo wood, with nickel silver guard
Blade Length: 100 mm.
Blade thickness: 4.5mm.
Overall length: 215mm.
Weight: 14g.
Sheath: Heavy leather, with vertical belt loop
Packaging: Wooden box with manufacturer’s logos and cardboard outer box
Notes: Knife from a private collection, previously purchased

The BFK Zero FOLGORE is an operational EDC project developed in collaboration with the “Folgore” Parachute Brigade, designed for continuous professional use where there is no room for error and every component must perform predictably.

The 3mm VG10 stainless steel blade is engineered to offer a true balance between edge retention, durability, and control, without unnecessary extremes. It features a geometry geared toward intensive daily use, designed to perform rather than be preserved. The construction combines an aluminum handle with steel liners, creating a rigid frame with tight tolerances and consistent mechanical response even under stress.

The Crossbar Lock system ensures safety and reliability at every stage of operation, while maintaining fully ambidextrous handling. Internal bearings ensure a smooth, repeatable opening action, free of jamming, designed to feel natural even without active attention.

The ergonomics are designed for extended carry: the compact profile reduces bulk without compromising the grip, while the ambidextrous clip allows for discreet and customizable carry. The weight remains low for the category, with a balanced distribution that does not feel fragile.

The BFK Zero FOLGORE is a military folding knife conceived as a professional everyday carry tool. It is not designed to be displayed, but to be used. Compact, reliable, efficient

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Italy
Blade: VG-10 stainless steel
Blade finish: Stonewashed with Folgore engraving
Handle: Anticorodal aluminum alloy
Blade length: 71mm.
Blade thickness: 2.5 mm.
Closed length: 99 mm.
Overall length: 166 mm.
Weight: 84 g.
Closure: Crossbar Lock
Clip: stainless steel, deep pocket style; reversible, removable, with custom engravings
Notes: Product manufactured under official licenses from the Italian Army

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in excellent condition
* Availability on the market: Hard to find
* Sharpening: Factory-sharpened
* Marks on blade: A few small abrasions visible against the light on the mirror finish
* Marks on handle: None
* Box: Present and complete
* Sheath: /
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our in-house laboratory

The Rockstead HIGO II in titanium is not simply a high-end folding knife: it is the ultimate embodiment of Japanese philosophy applied to cutting, where every detail is pushed to the limits of perfection.

The minimalist, flawless titanium handle serves as a counterpoint to a ZDP-189 blade hardened to extreme hardness and finished with an almost unreal mirror polish. The result is not merely aesthetic: it is a living surface, capable of gliding through material with a smoothness and continuity that few knives in the world can offer.

Rockstead’s proprietary convex geometry does more than just cut: it separates, controls, and guides. It is a blade designed for those who recognize the difference between extreme sharpness and true long-term efficiency.

The HIGO II is an object for connoisseurs, where tolerances, treatments, and finishes are not mere technical specifications, but part of a precise language.

Intended use: Collectible / Sport

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: ZDP-189 stainless steel, hardened to 66.5 HRC
Blade finish: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Closed thickness: 12.2mm.
Weight: 136g.
Opening mechanism: ambidextrous pivot 
Washers: brass
Closure: FrameLock with SKD11 striker at 61HRC
Clip: removable, 420J2 stainless steel with PVD coating
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: knife from a private collection, previously purchased

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new, never used or removed from its original packaging
* Availability: Hard to find
* Sharpening: Factory-sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete
* Sheath: /
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our in-house laboratory

The Hinderer Firetac Spanto Tri-Way with a stonewash finish and black G10 handle represents the perfect balance between durability, functionality, and tactical design. Designed for intensive daily carry (EDC), this folding knife combines high-quality materials with advanced technical solutions, ensuring reliable performance in any situation.

The premium steel blade with a Spanto profile offers exceptional versatility, ideal for both precision work and heavier-duty tasks. The Tri-Way Pivot system allows the user to customize the opening mechanism by choosing between ball bearings, bronze washers, or Teflon washers, thereby adapting the knife to their preferences.

Solid, ergonomic, and built to Rick Hinderer’s high standards, the Firetac is an excellent choice for professionals, enthusiasts, and collectors seeking a reliable and distinctive EDC.

Intended Use: Tactical / Sporting

Manufacturing Type: Midtech
Country of Manufacture: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: 2mm-thick black G10 scales over a 1mm-thick 6AL4V titanium liner. 3mm-thick 6AL4V titanium frame, machined from solid stock. Spacers and hardware in 17-4PH stainless steel
Blade length: 76mm.
Blade thickness: 3.5mm.
Closed length: 120mm.
Overall length: 213mm.
Weight: 122g.
Lock type: Frame Lock
Clip: titanium, removable and multi-position
Notes: knife from a private collection, previously purchased

Discover the new Mcusta Damascus Tanto: a knife that combines the timeless elegance of traditional Japanese blades with top-tier modern performance.

Crafted from SPG-2 Powdered High Speed Tool Steel, it offers exceptional sharpness and superior edge retention. The Damascus blade, with a matte gray finish and hammered texture (tsuchime), immediately catches the eye and evokes authentic Japanese craftsmanship.

The handle, inspired by classic Japanese swords, is made of genuine stingray leather covered in black leather with a tsuka-maki-style wrap: a choice that blends tradition and innovation, ensuring a secure, stable, and comfortable grip. The full-tang construction guarantees strength and durability, while the perfect balance gives you total control in every use.

It is not just a knife, but a true piece of character, where precision and the samurai spirit meet.

Intended use: Collectible / Sport

Production type: industrial
Blade: full tang in laminated Damascus steel, with a central core of SPG2 at 61/62 HRC and outer layers of R-2
Blade finish: hammered (Tsuchime)
Country of manufacture: Japan
Handle: genuine stingray leather (Samekawa) grip with Tsuka-Maki leather wrapping (Tsuka-Gawa)
Blade length: 160mm.
Blade thickness: 4.2 mm.
Overall length: 285 mm.
Weight: 215 g.
Sheath: leather, belt-mounted, for vertical carry
Packaging: box made of Paulownia wood, with manufacturer’s logos
Notes: -

Since 1980, the Boker Damast Annual Knife has represented the pinnacle of Boker's pioneering quality, combining premium materials, master craftsmanship, and timeless design. The 2026 edition draws inspiration from the iconic Boker Kihon Bifold, designed by American knife maker Lucas Burnley, reinterpreting its essential design philosophy in a strictly limited series of just 999 pieces worldwide.

The term Kihon evokes the fundamental techniques of Japanese martial arts, a concept perfectly reflected in the knife’s design: minimalist, functional, and elegant. The extraordinary 160-layer Damascus blade, featuring a classic ladder pattern, ensures excellent edge retention and a dynamic, refined aesthetic.

Opening is intuitive and secure thanks to the thumb stud and back lock mechanism. The high-quality carbon fiber handle harmoniously complements the blade, offering a modern, lightweight, and highly durable character. Handcrafted in Solingen, this exclusive EDC pocket knife embodies the meticulous attention to detail that has distinguished Böker for generations.

This refined collector’s item is presented in an elegant display case, further enhancing its exclusivity and prestige.

Intended use: EDC / Sports

Production type: Industrial
Country of manufacture: Germany
Blade: 160-layer handcrafted Damascus steel, with a “ladder” pattern by Chad Nichols
Blade finish: -
Handle: Carbon fiber / FatCarbon
Blade length: 81mm.
Blade thickness: 2.6 mm.
Overall length: 188 mm.
Weight: 55 g.
Clip:  stainless steel, machined from solid, removable
Lock:  Back Lock
Packaging: cardboard box with Boker logos
Notes: Design by Lucas Burnley

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Knife from 2018 in excellent overall condition, never used for cutting, has very small spots of oxidation on the blade that do not compromise its practical use in any way
* Available on the market: Model out of production and no longer available on the market
* Sharpness: Factory sharp
* Marks on blade: Very small signs of oxidation that do not compromise its use
* Marks on handle: None
* Box: Present and complete
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

Intended use: Tactical/Collection

Type of production: MidTech
Country of production: USA
Blade: D2 steel 
Blade finish: Tumbled & Satin
Handle: full titanium
Blade length: 95mm.
Blade thickness: 5mm.
Total length: 227mm.
Thickness when closed: 13mm.
Weight: 254g.
Closure: Frame Lock
Clip: removable, titanium, with tumbled finish
Packaging: tactical polymer case with Medford logos, cardboard outer box, certificates, and warranties
Notes: discontinued model, produced in 2018, previously purchased and from a private collection

PRIVATE COLLECTOR'S KNIFE, PREVIOUSLY PURCHASED
* Provenance: Withdrawn from a private individual, previously purchased
* Condition: Iconic knife from the early 2000s, never used, in very good condition (typical signs of wear of this model and material given by rubbing with the sheath)
* Available on the market: Difficult to find and not in this configuration
* Sharpening: Factory, can be improved
* Blade marks: Typical wear marks of this model and material, given by rubbing with the sheath
* Signs on handle: Small signs given by time
* Box: -
* Sheath: Present, in good condition, with small signs given by time
* Manuals, Certificates and Guarantees: -
* Controlled and Certified by our in-house laboratory

The MBK-TI model is a utility knife designed to offer maximum reliability and discretion in the most demanding operational uses. Equipped with a 4-inch spear point blade, it was conceived as a more aggressive and compact solution for boot knife or neck knife use, particularly suitable for professional contexts in special operations, SWAT units and tactical environments.

Intended use: Multi-role / Boot Knife / Neck Knife

Type of Production: industrial
Blade: Full Tang in Titanium Beta, with micro-balled finish
Country of production USA
Grip: Black G10
Blade length: 101mm.
Blade thickness: 5mm.
Total length: 203mm.
Weight: 99g.
Sheath: in kydex, thermoformed, with Tek-Lok multi-position attachment
Packaging: -
Note: Previously purchased knife, from private collection - iconic product from the early 2000s

RETIRED KNIFE FROM PRIVATE COLLECTION
* Provenance: Withdrawn from a private individual, previously purchased
* Condition: Overall in excellent condition, has light surface scratches on the steel handle
* Available on the market: Seventh generation of the model, produced only between 1999 and 2001, currently out of catalogue and out of production
* Sharpening: Factory
* Signs on blade: None
* Handle marks: light surface scratches
* Box: Present, complete and in excellent condition
* Sheath: -
* Manuals, Certificates and Guarantees: Present
* Controlled and Certified by our in-house laboratory

Originally launched in 1987, the Co-Pilot was sold as a small travel knife with a two-inch blade, designed to be carried on airplanes so you never give up a handy pocket or money clip once you arrive at your destination. Times have changed, but the design continues to prove its full validity.

Intended use: Sporty/Collection

Type of production: Industrial
Country of production: Japan
Blade: In stainless steel ATS-55
Blade finish: satin
Handling: stainless steel
Blade length: 51mm.
Blade thickness: 2.5mm.
Closed length: 76mm.
Total length: 127mm.
Weight: 74g.
Locking system: Back Lock
Clip: removable, stainless steel
Packaging: carton box, manuals and warranty
Note: Previously purchased knife, from a private collection

RETIRED KNIFE FROM PRIVATE COLLECTION
* Provenance: Withdrawn from a private individual, previously purchased
* Condition: Iconic knife from the early 2000s, never used, in very good condition (typical signs of wear of this model and material given by rubbing with the sheath)
* Available on the market: Difficult to find and not in this configuration
* Sharpening: Professionally sharpened
* Blade marks: Typical wear marks of this model and material, given by rubbing with the sheath
* Signs on handle: None
* Box: -
* Sheath: Present and in excellent condition, Made in USA by SpecOps
* Manuals, Certificates and Guarantees: -
* Controlled and Certified by our in-house laboratory

Intended use: Multi-role

Type of Production: industrial
Blade: Full Tang in Titanium Beta, with micro-balled finish
Country of production USA
Grip: Black G10
Blade length: 130mm.
Blade thickness: 6.3mm.
Total length: 255mm.
Weight: 243g.
Sheath: Made in USA by SpecOps, in coyote colored Nylon, belt, MOLLE compatible, with thermoformed Kydex inner part
Packaging: -
Note: Previously purchased knife, from private collection - iconic product from the early 2000s

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Excellent, never used and never removed from its sheath, which shows some minor abrasions due to age and storage
* Available on the market: Out of production in this variant
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Present, with some minor abrasions due to age and storage
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Kiku Matsuda is one of the most famous artists and scholars of sharpening in Japan. You probably already have a knife in your collection that is the result of his passion: he has been collaborating for several years with SOG, William Henry, Pro-Tech, and Randall Kings, developing blade bevels, sharpening, and polishing techniques for them.

Intended use: Tactical

Type of production: Handcrafted
Country of production: Japan
Blade: D2 steel hardened to 61HRC
Blade finish: Acid etching
Handle: Green Canvas Micarta 
Blade length: 90mm.
Blade thickness: 4.8mm.
Total length: 204mm.
Weight: 188g.
Sheath: Sunloid KD (Kydex) with Tek-Lok attachment
Packaging: -
Notes: Kiku Matsuda won the prestigious Blade Show “Knife Of The Year Awards” in 2007.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Excellent, never used and never removed from its sheath - small marks on the sheath due to age and storage
* Available on the market: Out of production in this variant
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Present - with small imperceptible marks, caused by time and storage
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Kiku Matsuda is one of the most famous artists and scholars of sharpening in all of Japan; you probably already have a knife in your collection that is the result of his passion: he has been collaborating for several years with SOG, William Henry, Pro-Tech, and Randall Kings, developing blade bevels, sharpening, and polishing for them.

Intended use: Collection/Sports

Type of production: Handcrafted
Country of production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade finish: Acid etching
Handle: Black Canvas Micarta 
Blade length: 150mm.
Blade thickness: 5.8mm.
Total length: 275mm.
Weight: 399g.
Sheath: Sunloid KD (Kydex) with Tek-Lok attachment
Packaging: -
Notes: In 2007, Kiku Matsuda won the prestigious Blade Show “Knife Of The Year Awards” with a project created in collaboration with SOG.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Difficult to find / Made to order
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Nylon pouch with zip
* Sheath: /
* Manuals, Certificates, and Warranties: /
* Checked and certified by our in-house laboratory

Intended use: collection/sport/military

Type of production: MidTech
Country of production: South Africa
Blade: CPM S35VN steel
Blade treatment: Satin
Handle: titanium and G10
Blade length: 103mm.
Blade thickness: 4.5mm.
Closed length: 132mm.
Total length: 234mm.
Closed thickness: 14mm.
Balance: on the guard
Weight: 168g.
Opening: Carson Flipper type, on ball bearings
Locking Mechanism: FrameLock with additional slider safety
Clip: titanium, machined from solid
Packaging: Cordura case with ADV Tactical logos
Notes: Previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Iconic knife from the early 2000s, never used, in excellent condition (signs of wear typical of this model and material due to rubbing against the sheath)
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: Signs of wear typical of this model and material, due to rubbing against the sheath
* Marks on handle: N/A
* Box: Present and in excellent condition
* Sheath: Present and in excellent condition, never used, with normal signs of age
* Manuals, Certificates, and Warranties: /
* Checked and Certified by our in-house laboratory

MISSION beta titanium knives are high-quality tools designed to withstand the most extreme conditions.

Made from a special beta titanium alloy, these knives combine exceptional lightness, corrosion resistance, and strength. MISSION developed these knives to ensure durability and reliability in extreme environments, such as the sea or high temperatures, and they are virtually indestructible. The main feature of these knives is their ability to remain perfectly usable even after intensive use.

The knives have been tested and selected by the US Navy SEALs, who have used them in sensitive missions and special operations. Thanks to their incredible strength, ease of maintenance, and reliability, they have become a benchmark for special forces professionals and enthusiasts of high-end outdoor equipment.

Intended use: Multi-purpose / Diving

Type of production: Industrial
Blade: Beta Titanium with micro-shot peened finish
Country of manufacture: USA
Handle: Beta Titanium with micro-shot peened finish
Blade length: 125mm.
Blade thickness: 6.3mm.
Total length: 248 mm.
Weight: 151 g.
Sheath: thermoformed Kydex, with removable nylon belt loop for vertical carry on belt.
Packaging: cardboard box with Mission Knives logos.
Notes: previously purchased knife from a private collection - discontinued, iconic product from the early 2000s.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used and never removed from its original packaging
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended use: Tactical/Sport

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Finish: Testudo burnishing
Handle: Forprene
Blade length: 128mm.
Blade thickness: 6.3mm.
Total length: 258mm.
Balance: rearward
Weight: 253g.
Sheath: Gen.1, ABS, with Tek-Lok multi-position attachment
Packaging: cardboard box with Extrema Ratio logos
Notes: from a private collection - 2007 model now out of production (replaced by the T4000 series)

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used and never removed from its original packaging
* Available on the market: Out of production in this variant
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Kiku Matsuda is one of the most famous artists and scholars of sharpening in all of Japan; you probably already have a knife in your collection that is the result of his passion: he has been collaborating for several years with SOG, William Henry, Pro-Tech, and Randall Kings, developing blade bevels, sharpening, and polishing for them.

Intended use: Collection/Sports

Type of production: Handcrafted
Country of production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade finish: Acid etching
Handle: Black Canvas Micarta 
Blade length: 85mm.
Blade thickness: 5.3mm.
Total length: 195mm.
Weight: 186g.
Sheath: Sunloid KD (Kydex) with Tek-Lok attachment
Packaging: cardboard box with Kiku Knives logos
Notes: In 2007, Kiku Matsuda won the prestigious Blade Show “Knife Of The Year Awards” with a project created in collaboration with SOG.

In the tradition of Chris Reeve Knives, the Inyoni bird and fish hunting knife takes its name from the Zulu word for "bird."  Light as a feather, weighing 68 grams, the latest version of the Inyoni offers all the functionality of its predecessor, without the weight.  

Its full-tang drop point blade makes it the ideal knife for processing birds and fish, while providing ample edge for many stages of processing larger game, as well as a long list of other cutting tasks outside the hunting field. The thin Kydex sheath fits perfectly over the handles of the Inyoni.

Intended use: sports/hunting

Type of Manufacture: MidTech
Country of Manufacture: USA
Blade: full tang in CPM MagnaCut 63/64HRC steel
Blade finish: stonewashed
Handle: Micarta
Blade length: 96mm.
Blade thickness: 3.2mm.
Total length: 202mm.
Weight: 68g.
Sheath: Slim Fit in thermoformed Kydex.
Packaging: cardboard box with Chris Reeve logos, paracord lanyard, maintenance key, certificates and warranties

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: 2012 model withdrawn from a private collection, previously purchased and used, probably carried a lot in a pocket or backpack
* Condition: Mechanically perfect, blade without marks - little use - titanium handles heavily abraded/worn from friction, probably carried often in a jeans or trouser pocket, which over time has abraded the finish and micro-shot peening of the titanium
* Available on the market: Out of production
* Sharpness: Factory sharp, good, could be improved
* Marks on blade: None
* Marks on handle: Titanium handles heavily abraded/worn from friction, probably carried often in a jeans or trouser pocket, which over time has abraded the finish and micro-shot peening of the titanium
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

Intended use: collection/sports

Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN stainless steel 58/59HRC
Handle: Titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 134g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificates - knife previously purchased and used, from a private collection

The Socom Delta represents the modern evolution of a Microtech icon, setting extremely high standards in the world of tactical and utility knives. A direct descendant of the legendary Socom, launched in 1996, the Delta takes its legacy to the next level in terms of ergonomics, solidity, and operational versatility. Available with a clip point or tanto blade, it guarantees absolute performance in any context. The integrated glass breaker at the base of the handle and the large pivot, which allows for easy opening even when wearing gloves, reinforce its professional vocation. Its robust reliability makes it a preferred choice even in the most demanding environments, now with RAM-LOK technology.

This robust reinterpretation of the crossbar closure features Microtech's characteristic stepped pattern, made famous by the Ultratech series of operating switches. The wide blade cutout provides space for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down the RAM-LOK and the blade opens with a simple flick of the wrist. The aluminum handles are slightly textured to provide excellent grip potential with both standard and reverse grips. 

Limited edition “Marfione Select” with handle made entirely of solid titanium with a stonewashed finish, rear spacer in blue double vapor blast anodized titanium. The knife comes with a microfiber pouch, a microfiber cleaning cloth, and a stainless steel warranty certificate autographed by Marfione himself.

Intended use: Tactical / Military / Collectible

Type of production: Midtech
Country of production: USA
Blade: M390MK stainless steel 60-61HRC
Blade finish: Stonewashed
Handle: Titanium Slab Stonewashed
Blade length: 101mm.
Blade thickness: 3.5mm.
Closed length: 129mm.
Total length: 233mm.
Closed thickness: 14mm.
Weight: 153g.
Closure: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up) with Marfione's signature
Packaging: cardboard box with Microtech USA and “Signature Series” logos
Notes: Design by Anthony Marfione - Limited edition collector's item accompanied by a microfiber pouch, a microfiber cleaning cloth, and a stainless steel warranty certificate autographed by Marfione.

Origin Acquired from a private collector, previously purchased
Condition Like new, never used
Sharpening Factory edge
Marks on blade None
Marks on handle None
Box -
Manuals, Certificates and Warranty Included
Checked and certified by our internal workshop

The Handcrafted Sardinian Guspinese Razor Blade in Horn Tip, made by Coltelleria Artigianale Guspinese, represents the perfect fusion of island tradition and artisanal craftsmanship. Handmade according to the ancient knife-making art of Guspini, this blade stands out for its tipless design, typical of the historic "guspinese", crafted for safe and versatile use.

The satin-finished stainless steel blade ensures corrosion resistance and lasting sharpness, while the carefully carved natural horn handle provides an ergonomic, elegant, and comfortable grip.
Every detail — from the brass bolster to the horn’s natural texture — tells a story of craftsmanship, making this knife not only a functional tool for daily use but also an exclusive collector’s item, ideal for enthusiasts of Sardinian culture, gastronomy, and outdoor life.

Intended use: Daily utility, collecting, outdoor activities
Production type: Handcrafted, handmade
Country of manufacture: Italy (Sardinia)
Blade: Satin-finished stainless steel
Blade finish: Artisan satin finish, smooth surface with fine texture
Handle: Handcrafted natural horn
Blade length: approx. 80mm
Blade thickness: approx. 2.5mm
Closed length: 125mm
Total length: approx. 200mm
Closed thickness: approx. 34mm
Weight: approx. 110g
Locking system: Traditional folding knife (pressure mechanism)
Clip: None
Packaging: Soft protective case

Origin Acquired from a private collector, previously purchased
Condition Like new, never used
Sharpening Factory edge
Marks on blade None
Marks on handle None
Box -
Manuals, Certificates and Warranty Included
Checked and certified by our internal workshop

The Handcrafted Sardinian Guspinese Razor Blade in Horn Tip, made by Coltelleria Artigianale Guspinese, represents the perfect fusion of island tradition and artisanal craftsmanship. Handmade according to the ancient knife-making art of Guspini, this blade stands out for its tipless design, typical of the historic "guspinese", crafted for safe and versatile use.

The satin-finished stainless steel blade ensures corrosion resistance and lasting sharpness, while the carefully carved natural horn handle provides an ergonomic, elegant, and comfortable grip.
Every detail — from the brass bolster to the horn’s natural texture — tells a story of craftsmanship, making this knife not only a functional tool for daily use but also an exclusive collector’s item, ideal for enthusiasts of Sardinian culture, gastronomy, and outdoor life.

Intended use: Daily utility, collecting, outdoor activities
Production type: Handcrafted, handmade
Country of manufacture: Italy (Sardinia)
Blade: Satin-finished stainless steel
Blade finish: Artisan satin finish, smooth surface with fine texture
Handle: Handcrafted natural horn
Blade length: approx. 80mm
Blade thickness: approx. 2.5mm
Closed length: 125mm
Total length: approx. 200mm
Closed thickness: approx. 34mm
Weight: approx. 110g
Locking system: Traditional folding knife (pressure mechanism)
Clip: None
Packaging: Soft protective case

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: in excellent condition, with some minor signs of wear
* Available on the market: unique, handmade piece
* Sharpness: original
* Marks on blade: None
* Marks on handle: some minor abrasions due to wear and tear
* Packaging: handmade leather case with cord
* Sheath: -
* Manuals, certificates and guarantees: Business card and certificate of authenticity, difficult to read due to ink discolouration over time
* Checked and certified by our in-house laboratory

Sardinia boasts a thousand-year-old tradition in metalworking and knife production, with a particular concentration in the Guspinese-Arburese-Gonnese area, historically linked to the mines of Montevecchio. This area is home to iconic models such as the Arburesa and the Guspinese (Sa Kuspidesa), symbols of craftsmanship handed down through the ages. This is where the work of Gian Paolo Cancedda, aka Furitto, comes in. He is a master knife maker who combines loyalty to tradition with technical research, helping to keep Guspinese cutlery alive and recognisable throughout the world.

Intended use: Regional / Collection

Type of production: Handcrafted
Country of production: Guspini, Sardinia, Italy
Blade: Sandvik 12C27 stainless steel
Blade treatment: satin finish
Handle: solid cow horn tip with acid-treated titanium collar
Blade length: 96 mm.
Blade thickness: 2 mm.
Closed length: 102 mm.
Total length: 199 mm.
Closed thickness: 18 mm.
Weight: 38 g.
Closure: no blade lock
Clip: -
Sheath: -
Packaging: leather case with handmade lace, craftsman's business card and certificate of authenticity from the Italian Knife Makers' Guild, difficult to read due to ink discolouration over time
Notes: knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

The Benchmade Anthem is one of the most daring and iconic knives ever made by the American brand. A “carte blanche” project, now out of production, it stands out for its integral monoblock titanium construction, high-level mechanical workmanship, and the best interpretation ever of the famous Axis Lock, redesigned here to ensure exceptional strength and fluidity. Elegant, slim, and surprisingly ergonomic, the Anthem is not just a knife, but a true statement of passion and engineering, designed for connoisseurs and collectors.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV steel 59/61HRC
Blade treatment: stonewashed
Handle: integral, bronze-colored anodized titanium
Blade length: 89mm.
Blade thickness: 2.85mm.
Closed length: 116mm.
Total length: 205mm.
Weight: 104g.
Closure: Axis Lock
Clip: Anodized titanium
Packaging: Cardboard box with Benchmade logos
Notes: knife out of production, previously purchased, from a private collection

KNIFE RETIRED FROM PRIVATE COLLECTION
* Origin: Retired from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: 2023 model, currently out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house lab

McNees Knives is an independent American company based in Vernon, Alabama, specializing in the production of high-quality folding knives, fixed blades, and EDC equipment, made entirely in the United States. For over fifteen years, the company has been building strong relationships with customers, partners, and suppliers who share the same values of reliability, passion, and attention to detail.

Today, McNees Knives continues to grow, offering some of the best knives and EDC accessories on the market, backed by customer service that is considered among the best in the industry. Entering the world of McNees means choosing quality, craftsmanship, and a brand that truly puts the customer first.

Intended use: Sports/Tactical

Type of production: MidTech
Country of production: USA
Blade: CPM-MagnaCut steel
Blade treatment: Matte Stonewashed
Handle: Bronze-colored anodized titanium
Blade length: 87mm.
Blade thickness: 3.8mm.
Closed length: 107 mm.
Total length: 194 mm.
Weight: 122 g.
Lock: Frame Lock
Clip: bronze-colored anodized titanium, removable
Packaging: cardboard box with McNees logos, warranty certificate with technical specifications
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and lightly used
* Condition: Overall in excellent condition, slight discoloration on the anodized opening pin
* Available on the market: Out of production
* Sharpness: Resharpened, sharpness could be improved
* Marks on blade: None
* Marks on handle: None
* Box: Present and original, but generic: no model references
* Sheath: -
* Manuals, certificates, and warranties: -
* Checked and certified by our in-house laboratory

Intended use: collection/sports

Type of production: MidTech
Country of production: USA
Blade: CPM-S30VN stainless steel 58/59HRC
Handle: Hammered titanium - a texture obtained by hand hammering that creates small irregular marks on the surface of the handle. The result is a three-dimensional appearance, with variable reflections in the light, greater grip, and a unique handcrafted character for each piece.
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Closed thickness: 10mm.
Weight: 81g.
Closure: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos, no references

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: In good condition, shows signs of wear on the titanium and a small mark on the blade that does not compromise its use
* Available on the market: Available to order from the manufacturer in different technical configurations
* Sharpness: Factory sharp
* Marks on blade: a small mark on the blade, possibly due to an impact or a fall
* Marks on handle: several signs of wear on the titanium
* Box: -
* Sheath: -
* Manuals, certificates, and warranties: -
* Checked and certified by our in-house laboratory

Intended use: Collectible/Sporting

Blade: CPM-S35VN stainless steel 58/59HRC
Handle: Titanium and Bocote
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 91mm.
Total length: 156mm.
Weight: 40g.
Closure: Frame Lock
Clip: Titanium
Notes: Mnandi means “very beautiful” in Zulu - knife previously purchased and used

The Chris Reeve Green Beret 7" Knife – 2025 Version, designed by the renowned William W. Harsey, represents one of the highest expressions of modern high-performance tactical knives. Born from the collaboration between Chris Reeve Knives and U.S. Special Forces, the Green Beret is an iconic blade, highly regarded both in operational environments and in high-end knife collecting. This new 2025 version introduces the outstanding CPM-MagnaCut steel, heat-treated to 61/62 HRC, offering an exceptional balance of edge retention, corrosion resistance, and structural toughness.

The 7-inch blade with Black PVD coating ensures tactical discretion and enhanced protection, while the Black Canvas Micarta handle provides a secure grip and absolute control in all conditions. Semi-industrially manufactured in the United States, in Boise, Idaho, the Green Beret 7" is perfectly balanced on the lower guard branch and comes complete with a M.O.L.L.E.-compatible nylon thigh sheath, as well as official certificates of authenticity and warranty. A knife designed for those who demand the very best, both as a fighter tool and as a premium collector’s piece.

Technical Specifications
Intended use: Collection / Fighter
Production type: Semi-industrial
Country of manufacture: Boise – Idaho – USA
Blade: CPM-MagnaCut stainless steel, hardened to 61/62 HRC
Blade finish: Black PVD
Handle: Black Canvas Micarta
Blade length: 180mm
Blade thickness: 5.58mm
Overall length: 315mm
Balance: On the lower guard branch
Weight: 363g
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: New 2025 version – Warranty and authenticity certificates – Design by William W. Harsey

Intended use: Collection, light everyday use

Production type: Handmade
Country of production: Italy (Frosolone / Piscitelli workshop)
Blade: 420HC stainless steel
Blade finish: Satin finish
Handle: Natural bovine horn
Blade length: 14.5 cm
Blade thickness: 2.2 mm
Closed length: 17.5 cm
Total length: 32 cm
Closed thickness: 2 cm
Weight: 145 g
Locking system: Ring mechanism with traditional “scrocchio” sound during opening
Packaging: Cardboard gift box with information note
Notes: Each knife features unique colors, shades, and finishes due to the natural horn used – handcrafted sharpening

NEW STRUCTURE: Full Tang
NEW GEOMETRY: Greater Control
NEW HANDLES: Black G10

The Harpoon F EVO, limited to only 150 numbered pieces, is the functional evolution of a tried and tested design. It retains the identity of the original Harpoon, but refines its ergonomics, structure, and balance for real and continuous use.

The full tang construction, G10 scales, and updated geometry offer greater control and solidity, while the 6.3 mm Böhler N690 blade guarantees reliability, penetration, and cutting precision.

The EVO finish completes a knife designed for operational use, advanced survival, and knowledgeable collectors.

Intended use: Tactical / Collectible

Type of production: Industrial
Country of production: Italy
Blade: full tang in N690Co steel
Blade treatment: Anti-reflective burnishing with EVO finish
Handle: Black G10 with CNC machining
Blade length: 209 mm.
Blade thickness: 6.3 mm.
Total length: 340 mm.
Weight: 442 g.
Sheath: Thigh sheath, reinforced Cordura
Packaging: Cardboard box with Extrema Ratio logos and Limited Edition plaque with progressive knife numbering
Notes: Limited edition, numbered to only 150 pieces worldwide

Dino Picco, master knifemaker and head designer of Wander Tactical, created the Compact version of the Centuria model, seamlessly blending the distinctive design of ancient Roman daggers with the iconic American military knives of World War II. This knife is handcrafted in custom production, ensuring exceptional quality and uniqueness in every single piece.

Intended use: Collection

Production type: Handcrafted
Country of manufacture: Italy
Blade: D2 steel at 59/60 HRC
Blade finish: Bronze
Handle: Micarta
Blade length: 140 mm
Blade thickness: 5.5 mm
Total length: 295 mm
Balance: Forward-balanced
Weight: 328 g
Sheath: Kydex, multi-position, with belt attachments and MOLLE compatible
Packaging: No retail box – supplied with Wander Tactical certificate of authenticity and warranty
Notes:

Benjamin Jeanjean is a transalpine artist living in the French Basque Country. He works as an illustrator, visual artist, and tattoo artist, blending black humor, nonsense, and symbolism through a figurative style rich in detail.  He has expressed his vision of the cosmos on the handle of the traditional N°08 pocket knife.

The N°08 Cosmos Benjamin Jeanjean evokes a symbolic exploration of the cosmos: a solar face representing universal balance, the phases of the moon recalling the eternal cycle of time, a cosmic canvas represented by geometric patterns... The artist has played on a duality that blends tradition and modernity.

The pocket knife has a PEFC hornbeam handle with sublimation decoration and an 8.5 cm stainless steel blade with black PVD treatment. It comes with a box, which echoes the motifs of the knife, and a postcard.

Limited edition of 8,200 pieces, numbered blades.

Intended use: Collection

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade finish: Black PVD
Handle: hornbeam wood with 3D sublimation decoration
Blade length: 85 mm.
Blade thickness: 1.5 mm.
Closed length: 107 mm.
Total length: 190 mm.
Weight: 42 g.
Closure: Viro-Block
Packaging: “Cosmos” edition cardboard box with Opinel logos, artist's postcard, warranty certificate

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has created the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended use: Collection / Utility

Type of production: Midtech
Country of production: Boise - Idaho - USA
Blade: CPM-MagnaCut steel at 61/62HRC
Surface treatment: CeraKote
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: Warranty and authenticity certificates - Design by William W. Harsey

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has created the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended use: Collection / Utility

Type of production: Midtech
Country of production: Boise - Idaho - USA
Blade: CPM-MagnaCut steel at 61/62HRC
Surface treatment: CeraKote
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: Warranty and authenticity certificates - Design by William W. Harsey

KNIFE RETIRED FROM PRIVATE COLLECTION
* Origin: Retired from a private collection, previously purchased
* Condition: Perfect, Like new, NOS (new old stock)
* Available on the market: 2006 model, out of production
* Sharpness: Factory sharp, never used
* Marks on blade: None
* Marks on handle: None
* Box: Present and in perfect condition
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The C70 A.T.R. (At The Ready) embodies the essence of a high-performance tactical folder. Awarded “Knife of the Year 2003” by Knives Illustrated, this model showcases the most advanced technological solutions developed by Spyderco.

The handle, precision-machined from a block of satin-finished stainless steel, is lightened by a series of holes that reduce weight and serve as tactile reference points for quick grip changes. The same holes are replicated on the contoured clip, ensuring balance and consistency in indexing.

The ends of the handle widen into a generous finger choil and a pinky rest, ensuring a stable grip in all conditions. The Compression Lock, fully integrated into the titanium scale, offers maximum strength and is rated for heavy-duty use and MBC applications.

The VG-10 blade, hollow-ground sharp, features a non-sharp swedge and a profile that combines a solid point with excellent penetration and cutting ability. Above the classic Spyderco hole is the Cobra Hood, which naturally guides the thumb during quick opening and acts as a control platform when the knife is in use.

The clip is configurable for both right and left tip-up carry thanks to the pre-drilled holes.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade finish: satin
Handle: satin stainless steel
Blade length: 87mm.
Blade thickness: 3 mm.
Closed length: 129 mm.
Total length: 216 mm.
Weight: 150g.
Closure: Compression Lock
Clip: polished stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife from a private collection - NOS (new old stock) in perfect condition, absolutely like new, without even a scratch or sign of use

Released in 2023, the Stitch RAM-LOK debuted with the MSI (Microtech Standard Issue) as the first Microtech blade equipped with its fantastic RAM-LOK technology. This sturdy reinterpretation of the crossbar lock features Microtech's signature stepped pattern, made famous by the Ultratech series' drive switches. The blade's wide cut provides room for reverse middle finger movements and standard slow-rotation thumb opening, with or without gloves. If neither of these is preferred, simply pull down on the RAM-LOK and the blade opens with a simple flick of the wrist. The aluminum handles are lightly textured to provide excellent grip potential with both standard and reverse grips. Rugged, durable, and made in the USA, we know it will quickly become a favorite among all members of the knife community.

The Microtech Stitch is a beautiful tactical collaboration between Tony Marfione and Sebastijan Berenji, AKA Borka. It takes Sebastijan's fantastic Stitch design and pairs it with Tony's superb opening mechanisms to create one of the most beautiful production collaborations ever.

Limited edition “Marfione Select” with handle made entirely of solid titanium with a stonewashed finish, flamed titanium spacer and double vapor blast bronzed hardware. The knife comes with a microfiber pouch, a microfiber cleaning cloth and a stainless steel warranty card autographed by Marfione himself.

Intended use: Tactical / Military / Collection

Type of production: Midtech
Country of production: USA
Blade: M390 stainless steel 60-61HRC
Blade finish: Stonewashed
Handle: Titanium Frag Pattern Stonewashed
Blade length: 92mm.
Blade thickness: 4mm.
Closed length: 129mm.
Total length: 217mm.
Closed thickness: 15mm.
Weight: 213g.
Closure: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up) with Marfione's signature
Packaging: cardboard box with Microtech USA and “Signature Series” logos
Notes: Design by Anthony Marfione & Borka Blades - Limited edition collector's item accompanied by a microfiber pouch, a microfiber cleaning cloth, and a stainless steel warranty certificate autographed by Marfione.

LIMITED EDITION CARRY BOX

– BFK EVO Limited Edition
The BFK EVO is a compact folding knife designed as Extrema Ratio's flagship product for the EDC world. Produced in a limited series of 500 pieces, it is available exclusively in THE CARRY BOX. Extrema Ratio's build quality is evident in every detail: mechanical precision, selected materials, proven ergonomics, ease of handling, concealability, quick opening, and the proverbial reliability that has distinguished the brand for over 30 years. From the very first glance, it conveys a feeling of uncompromising strength and solidity.

Main features:

* Nitrogen steel blade with Tanto profile and reinforced tip, stone-washed finish.
* Black anodized aluminum scales, sturdy and compact for easy everyday carry.
* Crossbar lock for exceptional safety.
* Bearing system that guarantees quick, smooth, and natural opening.
* Customized lanyard on the tang for immediate extraction and improved grip.
* Dedicated laser engraving on the blade and clip that identifies the limited series.

BFK EVO is not an object to be shown off: it is a tool designed to be carried every day.

Intended use: EDC / Sports

Type of production: industrial
Country of production: Italy
Blade: Nitrogen stainless steel
Blade finish: Stonewashed with custom engravings
Handle: Anticorodal aluminum alloy
Blade length: 71mm.
Blade thickness: 2.5mm.
Closed length: 99mm.
Total length: 166mm.
Weight: 84g.
Locking Mechanism: Crossbar Lock
Clip: stainless steel, deep pocket type; reversible, removable, with custom engravings
Notes: Limited edition, numbered to only 500 pieces worldwide - Knife available for purchase only on this occasion and together with the Carry Box

– Extrema Ratio Essential Cap
Baseball cap with an elegant, urban design. Made of sturdy, breathable fabric, it features a silicone patch with the Extrema Ratio logo, an instantly recognizable symbol of belonging.

– Leather Zip Wallet
Black leather wallet with three-sided zipper closure and lanyard hook, ideal for preventing accidental loss. Designed to hold everything you need (cards, bills, etc.), it is a durable and reliable accessory, perfect for everyday use.

– Carbon Fiber Card
Compact carbon fiber tool with a sharp lower edge, useful in emergency or self-defense situations. It is the size of a credit card and fits into the Extrema Ratio wallet. A side recess facilitates proper grip for maximum effectiveness.