Year 2022
-
Lionsteel - Myto Damascus knife - Titanium Blue - MT01DBL - knife
Myto is the new hi-tech EDC folding knife that fits perfectly in your pocket and can be used for all daily activities. Its geometry and Molletta's elegant and minimal design marry perfectly with his strength:
has a M390 sintered steel blade with satin finish equipped with "" ReF "" (Removable Flipper system) and a Double Crown ball bearing system for a more stable blade and a smoother movement
has a SOLID® titanium clip screwed to the frame by a tungsten carbide glass breaker.
the locking bar is reinforced with a hardened steel insert to avoid wear due to blade rotation.Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: Chad Nichols Stainless Damascus
Blade treatment:
Handle: titanium
Blade length: 83mm.
Blade thickness: 4mm.
Total length: 201mm.
Thick when closed: -mm.
Weight: 118g.
Closure: Frame Lock
Clip: titanium
Packaging: Elegant fully recyclable cardboard box
Notes: Carson Flipper opening system on ball bearingsLS-MT01DBL -
Lionsteel - THRILL Damascus knife - SlipJoint Titanium Gray - TL D GY - knife
Thrill Aluminum is the SlipJoint knife with clip that can be inserted inside the handle in case of need thanks to the lionSTEEL HWAY.L - Hide What Annoys You system.
Designed by Molletta, it is equipped with a “no locks” mechanism and has a SOLID® Knife handle, made from a single block of aluminum. The handle, light and easy to grip, is available in black, red, green and orange.
The blade is in Scrambled damask (Chad Nichols).
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Italy
Blade: Chad Nichols Stainless Damascus
Blade treatment: Satin
Handle: Titanium machined from solid
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 18mm.
Weight: 88g.
Closure: SlipJoint with steel flap
Clip: retractable, machined from solid
Packaging: cardboard box with LionSteel logos
Note: -LS-TLDGY -
MaglioNero - Iside Line - American Scimitar Granton 26cm - IS5226 - kitchen knife
Fratelli Rizzi was founded at the end of the 19th century in Premana, a small Italian mountain village located between Valtellina and Valsassina. A flexible and competitive company that, combining the typical characteristics of craftsmanship with the continuous research of new technologies, is synonymous with quality in the production of professional cutlery.
In 2012, after about 50 years of experience in the cutlery sector, Fratelli Rizzi decides to propose its own lines of professional cutlery under the name of MaglioNero, combining them with numerous collaborations with the best Italian and European operators in the field of professional cutlery.
THE ISIDE LINE
Developed with the help of Michelin-starred chef Iside De Cesare, it was created to best satisfy all cutting needs in the kitchen.
It features modern, elegant and functional lines, with a full silk handle and Nitro-B steel blades with a hardness of 57HRC to ensure a high level of edge retention and marked corrosion resistance. The handles, full tang, are made of polished POM with stainless steel rivets; their special design is studied to offer a comfortable ergonomics and optimize the balance of the knife.
Suggested use: cooked meat, roasts, barbecue, cold cutsCountry of production: Premana, Italy
Cutting edge steel: Nitro-B stainless steel with hardness of 57HRC
Blade finish: satin
Blade length: 260mm.
Construction: full tang with riveted handle
Handle: black POM
Maintenance: hand washing recommended; suitable for occasional washing in dishwasherMN-IS5226 -
MaglioNero - Iside Line - Maxi Santoku 21cm - IS5521 - kitchen knife
Fratelli Rizzi was founded at the end of the 19th century in Premana, a small Italian mountain village located between Valtellina and Valsassina. A flexible and competitive company that, combining the typical characteristics of craftsmanship with the continuous research of new technologies, is synonymous with quality in the production of professional cutlery.
In 2012, after about 50 years of experience in the cutlery sector, Fratelli Rizzi decides to propose its own lines of professional cutlery under the name of MaglioNero, combining them with numerous collaborations with the best Italian and European operators in the field of professional cutlery.
THE ISIDE LINE
Developed with the help of Michelin-starred chef Iside De Cesare, it was created to best satisfy all cutting needs in the kitchen.
It features modern, elegant and functional lines, with a full silk handle and Nitro-B steel blades with a hardness of 57HRC to ensure a high level of edge retention and marked corrosion resistance. The handles, full tang, are made of polished POM with stainless steel rivets; their special design is studied to offer a comfortable ergonomics and optimize the balance of the knife.
Suggested use: vegetables, raw meat, fishCountry of production: Premana, Italy
Cutting edge: Nitro-B stainless steel with a hardness of 57HRC
Blade finish: satin
Blade length: 170mm.
Construction: full tang with riveted handle
Handle: black POM
Maintenance: manual washing recommended; suitable for occasional washing in the dishwasherMN-IS5521 -
MaglioNero - Iside line - Santoku 17cm - IS5517 - kitchen knife
Fratelli Rizzi was founded at the end of the 19th century in Premana, a small Italian mountain village located between Valtellina and Valsassina. A flexible and competitive company that, combining the typical characteristics of craftsmanship with the continuous research of new technologies, is synonymous with quality in the production of professional cutlery.
In 2012, after about 50 years of experience in the cutlery sector, Fratelli Rizzi decides to propose its own lines of professional cutlery under the name of MaglioNero, combining them with numerous collaborations with the best Italian and European operators in the field of professional cutlery.
THE ISIDE LINE
Developed with the help of Michelin-starred chef Iside De Cesare, it was created to best satisfy all cutting needs in the kitchen.
It features modern, elegant and functional lines, with a full silk handle and Nitro-B steel blades with a hardness of 57HRC to ensure a high level of edge retention and marked corrosion resistance. The handles, full tang, are made of polished POM with stainless steel rivets; their special design is studied to offer a comfortable ergonomics and optimize the balance of the knife.
Suggested use: vegetables, raw meat, fishCountry of production: Premana, Italy
Cutting edge steel: Nitro-B stainless steel with hardness of 57HRC
Blade finish: satin
Blade length: 170mm.
Construction: full tang with riveted handle
Handle: black POM
Maintenance: manual washing recommended; suitable for occasional washing in the dishwasherMN-IS5517 -
MaglioNero - Iside Line - Santoku 19cm - IS5519 - kitchen knife
Fratelli Rizzi was founded at the end of the 19th century in Premana, a small Italian mountain village located between Valtellina and Valsassina. A flexible and competitive company that, combining the typical characteristics of craftsmanship with the continuous research of new technologies, is synonymous with quality in the production of professional cutlery.
In 2012, after about 50 years of experience in the cutlery sector, Fratelli Rizzi decides to propose its own lines of professional cutlery under the name of MaglioNero, combining them with numerous collaborations with the best Italian and European operators in the field of professional cutlery.
THE ISIDE LINE
Developed with the help of Michelin-starred chef Iside De Cesare, it was created to best satisfy all cutting needs in the kitchen.
It features modern, elegant and functional lines, with a full silk handle and Nitro-B steel blades with a hardness of 57HRC to ensure a high level of edge retention and marked corrosion resistance. The handles, full tang, are made of polished POM with stainless steel rivets; their special design is studied to offer a comfortable ergonomics and optimize the balance of the knife.
Suggested use: vegetables, raw meat, fishCountry of production: Premana, Italy
Cutting edge steel: Nitro-B stainless steel with hardness of 57HRC
Blade finish: satin
Blade length: 190mm.
Construction: full tang with riveted handle
Handle: black POM
Maintenance: manual washing recommended; suitable for occasional washing in the dishwasherMN-IS5519 -
MaglioNero - Iside Line - Chef's knife 21cm - IS1621 - kitchen knife
Fratelli Rizzi was founded at the end of the 19th century in Premana, a small Italian mountain village located between Valtellina and Valsassina. A flexible and competitive company that, combining the typical characteristics of craftsmanship with the continuous research of new technologies, is synonymous with quality in the production of professional cutlery.
In 2012, after about 50 years of experience in the cutlery sector, Fratelli Rizzi decides to propose its own lines of professional cutlery under the name of MaglioNero, combining them with numerous collaborations with the best Italian and European operators in the field of professional cutlery.
THE ISIDE LINE
Developed with the help of Michelin-starred chef Iside De Cesare, it was created to best satisfy all cutting needs in the kitchen.
It features modern, elegant and functional lines, with a full silk handle and Nitro-B steel blades with a hardness of 57HRC to ensure a high level of edge retention and marked corrosion resistance. The handles, full tang, are made of polished POM with stainless steel rivets; their special design is studied to offer comfortable ergonomics and optimize the balance of the knife.
Suggested use: raw meat, vegetablesCountry of production: Premana, Italy
Cutting edge steel: Nitro-B stainless steel with a hardness of 57HRC
Blade finish: satin
Blade length: 210 mm
Construction: Solid tang with riveted handle
Handle: Black POM
Care: Hand washing is recommended; suitable for occasional dishwashing.MN-IS1621 -
Benchmade - Anonimus - CPM-CruWear - 539GY - knife
Take the new Anonimus into the woods by keeping it by your side and you'll be ready to take on any adventure!
This fixed blade survival knife is ideal for bushcrafting thanks to the CPM-CruWear steel blade that offers excellent cutting and edge-holding capabilities combined with a deliberately low-profile aesthetic thanks to the matte finish of the Cerakote blade and a black Boltaron sheath with additional loop for a fire stick.
Intended Use: Bushcraft / Hiking / UtilityProduction Type: Industrial
Country of Production: USA
Blade: Full tang tool steel CPM-CRUWEAR 63/65HRC
Blade Treatment: Tungsten Grey Cerakote
Handle: G10
Blade length: 127mm.
Blade thickness: 2.9mm.
Total length: 249mm.
Weight: 168g.
Sheath: made of Boltaron, injection molded polymer, with additional loop to accommodate a fire stick.
Packaging: cardboard box with Benchmade logos
Notes: -BM-539GY -
ExtremaRatio - Satre - N690 Black - Neck Knife - Knife
Satre is a small, light and extremely resistant fixed blade knife. Given its characteristics, it is used in a wide range of disciplines and uses ranging from survival activity, bushcraft or as an element of an EDC (Every Day Carry) kit.
It was designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S.S. (Italian Federation of Sports and Experimental Survival).
In Neck Knife mode, through the use of a paracord 550 cord, it is possible to keep it around the neck by keeping the knife vertically with the handle facing downwards. The metal eyelets on the sheath made of pre-shaped Kydex allow the application of both the lanyard and the accessory holder.
The full-tang skeletonized structure allows you to customize the knife using paracord as a coating for the handle
This Black version uses the Böhler N690 heat treated at 58 HRC. This material is chosen for its resistance to oxidation, the durability of the wire and above all the reliability it has shown over the years.
Intended use: Neck / Hiking / Utility Knife
Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black
Handle: stainless steel N690Co 58 / 60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78 g.
Sheath: in Kydex, for neck
Packaging: Cardboard box with Extrema Ratio logos
Note: possibility to use the sheath with Ulti-Clip systems, M.O.L.L.E. o Tek-Lok (available separately)ER-SAT-BL -
Pohl Force - Compact Two BK TiNi - D2 steel - 6032 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The surface of the blade has a tactical, non-reflective TiNi titanium nitriding coating that provides excellent protection against external corrosives.
The reduced handle design is the basis for the knife's very compact size. The pleasantly rounded tang and cleverly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact TWO BK is equipped with a robust, high-quality Kydex sheath in black. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC with TiNi coating
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6032 -
Pohl Force - Compact Two SW - D2 steel - 6031 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.
The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact Two SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6031 -
Pohl Force - Compact One SW - D2 steel - 6021 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive, classic Bowie blade of the Compact One, which is 88 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.
The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact One SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 88mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6021 -
Due Cigni - Classic Line 2C - carving knife 16cm - 758/16 - kitchen knife
In the ancient City of Cutlery in Maniago, DUE CIGNI has been passionately producing professional scissors and knives of the highest quality for over a century.
Special steels of the highest quality, innovative design and attention to the smallest details mean that DUE CIGNI products do not go indifferent even to the most demanding user.
Latest generation machinery, qualified personnel and renovation are the elements on which the solid basis of the success of the DUE CIGNI brand is founded.
DUE CIGNI knives and scissors are ideal tools for professional users in the food and gastronomy sectors who need a perfect cut, effortlessly and lasting over time ... for over a hundred years.Recommended use: carving knife
Country of production: Italy
Cutting steel: stainless steel 4116 X50CrMoV15 - HRC 55-57
Blade finish: satin
Blade length: 160mm.
Construction: full tang
Handle: black POM
Maintenance: also dishwasher safeDC-758/16 -
Antonini knives - Old Bear knife in SanMai VG10 a 67 layers - 23cm - multilayer black - Limited Edition
Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.
The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.
To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade
Type of production: semi-artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in plywood with satin brass ring with nickel plating
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 127mm.
Thick when closed: 22mm.
Total length: 225mm.
Weight: 68g.
Closure: viro blockThe handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid safety ring in nickel plated brass equipped with a special locking device (covered by patent n. active partner of this project) which can be activated both in the open and in the closed position.
As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.
The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.
Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: Collini Steel
AE-9305/23_MNK -
Antonini knives - Old Bear knife in SanMai VG10 at 67 layers - 21cm - olive tree - Limited Edition
Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.
The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.
To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade
Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: olive wood
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Thick when closed: 22mm.
Total length: 212mm.
Weight: 65g.
Closure: viro blockThe handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n. of this project) which can be activated both in the open position and in the closed position.
As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.
The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.
Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: Collini Steel
AE-9305/21_LU -
Antonini knives - Old Bear knife in SanMai VG10 at 67 layers - 19cm - walnut - Limited Edition
Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.
The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.
To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade
Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 46g.
Closure: viro blockThe handles are made of antique and oiled walnut wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.
As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.
The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.
Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: Collini Steel
AE-9305/19_LN -
Global - GS27 - 14cm Spatula Curve - Kitchen Knife
Details Global - GS27 - 14cm Spatula curve .
- Kitchen knife Spatula for cooking and serving omelets , wraps, crepes and distribute sauces or ingredients on -course and desserts.
- Use: Spatula Blade Length : 14 cm . Total Length : 27
- Japanese knives GLOBAL are preferred by chefs in the most prestigious hotels and restaurants in the world .
- The first GLOBAL knife was designed in 1985 by Komin Yamada , who gave the knife he created a revolutionary new design . The main characteristics of GLOBAL knives are: - Lightweight: GLOBAL was the first company worldwide to achieve a steel knife blank in the handle.
- This feature allows to reduce the weight of the knife 30%. - Handling: thanks to the lightness and the anatomical shape of the handle, the knives GLOBAL lend themselves to continuous and prolonged operating times , thus minimizing user fatigue .
- - Tenuta thread : GLOBAL knives are made using the best steel and the latest manufacturing techniques . In the blades is present in high percentage Molybdenum / Vanadium thanks to which the hardness of the steel reaches 56/58 Rockwell hardness , thereby increasing the length of the wire.
- - Robustness : GLOBAL knives being completely in steel (both the handle and the blade ) are virtually indestructible.
- - Elegance Credits earned by GLOBAL knives : 1990
- - Japanese Good Design by MITI 1991
- - Selected for International Design Year Book 1992
- - Selected as Best Cooks ' Knife in Benelux 1995
- - Selected as Best Knife by WHICH Magazine in the UK 1996
- - Selected as Sharpest Knife by A LA CARTE Magazine in Germany Global All products we sell are screen printed indelibly with the logo of Collini Cutlery ( see picture) .
- The CE marking means the buyer to be sure about the quality , traceability , warranty assistance over the years and a future prime product purchased at the Collini Cutlery .
GS27 -
MKM - Maximo Flipper Knife Design by Bob Terzuola - Black Micarta - MK-MM-BCT - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Sheath: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-BCT -
MKM - Maximo Flipper Design by Bob Terzuola - Green Micarta - MK-MM-GCT - folding knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Closure: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-GCT -
MKM - Maximo Flipper Knife Design by Bob Terzuola - Titanium - MK-MM-T - folding knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: Titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 134g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-T -
Kershaw - Fire Starter - Firelighter - 1019X - Hiking Accessory
Start hiking fire, usable about 3000 times, which generates sparks at 2980 ° C. It can also be used in cold and humid environments. This flint allows you to easily light fires in any weather situation and at any altitude. Wooden handle, high visibility paracord lanyard, firelighter in ferrocerio and stainless steel rubbing plate
Use
1) Remove the paint from the steel rod with the plate supplied or with a knife blade.
2) Slowly rub the plate supplied or the blade of the knife on the steel rod.
3) The sparks produced allow the ignition of stoves, barbecues, paper, dry grass and bark.Instructions
1. Take a small amount of cotton, paper, straw or flammable material.
2. a) Grasp the FireSteel with one hand
2. b) Grasp the steel plate with the other hand
2. c) Place the tag on the FireSteel
3. Rub the plate slowly down while holding the FireSteel tightlyKE-1019X -
Pavoni - Hearts 1 - Half moon silicone mould - 3 impressions
Pavoni - Hearts 1 - Half moon silicone mould - 3 impressions
Pavodecor is the new 2022 line by Pavoni
Each mould is thought to enrich and decorate éclairs, monoportions and cakes. Light and essential designs, that will transform your creations in unique and personalized proposals.
Precise and easy-to-make moulds for use with chocolate, biscuit mixes and other pastry preparations.
Make your cake unique, no limits to fantasy, the password is to experiment!
Line: Pavodecor
Design: half moon hearts
Suggested for cakes decoration
Material: 100% platinic silicone, suitable for food contact
Mould size: 30 x 17,5 cm
Number of impressions: 3
Single impression size: 13,7 x 7,6 cm H 2 mm
Single impression volume: 5.8 ml
Mould features:
Suitable for fridge/freezer/killer
Suitable for oven/microwave oven
Temperature range: -40°C/+250°C
Dishwasher safe, no rinse aid required
Non-toxic, odourless and tasteless
Flexible and space-saving
Unbreakable and long-lasting.
PR007 -
Black Blum - Insulated Travel Cup- FOOD & DRINK ON-THE-GO
Black Blum - Insulated Travel Cup- FOOD & DRINK ON-THE-GO
Everything you need to prepare and enjoy your meal when you're out and about. Perfect in your backpack, boat, bike, school, office or picnic basket.
Founded in 1998, Black + Blum is based in London, one of the world's most cosmopolitan and creative cities with a thriving community of design-driven companies. Our products are sold through distributors in over 60 countries worldwide and we have two warehouses one in the UK and another in the USA. Following on from our success in a number of product categories, our primary focus is the further development of the rapidly growing and internationally acclaimed food and drink range. Both these sectors are benefiting from growing consumer trends, which are increasingly health and wellness conscious, but above all with a strong ecological awareness. People are increasingly aware of the importance and benefits of healthy and sustainable living.
FOOD & DRINK ON-THE-GO products offer unique designs and a range of tailor-made solutions for all their hydration and nutrition needs. Carrying food and drink with you brings many health, environmental and economic benefits. People are becoming increasingly aware of the importance and benefits of healthy and sustainable living. FOOD & DRINK ON-THE-GO products offer unique designs and a range of tailored solutions for all their hydration and nutrition needs.
Features:
A 340ml / 12 fl oz stainless steel vacuum insulated travel cup that is completely leak proof and will keep your drinks hot (or cold) for hours.
100% leak proof Up to 5 hours hot, 8 hours cold
Lockable One handed opening and closing
High-quality 18/8 stainless steel
Fits in bike bottle cages and car cup holders
Lid disassembles easily for thorough cleaning and is dishwasher safe
BPA, BPS & BPF fre.
TCSS005€22.95Only 1 left -
Black Blum - Stainless steel lunch box - SANDWICH BOX - FOOD & DRINK ON-THE-GO
Black Blum - Stainless steel lunch box - SANDWICH BOX - FOOD & DRINK ON-THE-GO
Everything you need to prepare and enjoy your meal when you're out and about. Perfect in your backpack, boat, bike, school, office or picnic basket. Founded in 1998, Black + Blum is based in London, one of the world's most cosmopolitan and creative cities with a thriving community of design-driven companies. Our products are sold through distributors in over 60 countries worldwide and we have two warehouses one in the UK and another in the USA. Following on from our success in a number of product categories, our primary focus is the further development of our rapidly growing and internationally acclaimed food and drink range. Both of these sectors are benefiting from growing consumer trends, which are increasingly health and wellness conscious, but above all with a strong ecological awareness. People are increasingly aware of the importance and benefits of healthy and sustainable living.
FOOD & DRINK ON-THE-GO products offer unique designs and a range of tailor-made solutions for all their hydration and nutrition needs. Carrying food and drink with you brings many health, environmental and economic benefits. People are becoming increasingly aware of the importance and benefits of healthy and sustainable living.
FOOD & DRINK ON-THE-GO products offer unique designs and a range of tailor-made solutions for all their hydration and nutrition needs.
MULTIFUNCTIONAL: the 3-in-1 lunch-box is a diversified food container that allows you to safely transport your lunch, cook dishes in the oven and even store pre-cooked meals in the freezer. Leak-proof: the stainless steel container lid is specially designed with a silicone strap to prevent spills or leaks
VACUUM SAFETY: the vacuum valve on the lid provides added security and leak-proof functionality; lift the valve to remove the vacuum and to be able to open the lid; push the valve down to close the lid securely
ECO-FRIENDLY: 100% plastic-free lunch box; the container, fork and food divider are made of high-quality stainless steel; the strap and gasket are made of BPA-free silicone One 1.25L stainless steel lunch box that makes it easy to take your food with you and also includes a bamboo lid that doubles as a cutting board.
Natural, anti-bacterial bamboo lid
Silicone strap to keep the box closed Includes a dishwasher-safe silicone inner compartment
Plastic free
High quality stainless steel
L 19cm W 13,5cm H 7,5cm
Weight: 430g
BAMSBL005€32.79Only 2 left -
Kershaw - Camp 10 Machete - 1077 - Black - outdoor knife
Camp 10 is the ideal tool for the outdoors and for survival. The solid edge blade is made of 65Mn carbon tool steel which is characterized by its wear resistance. A black powder coating protects the steel and facilitates maintenance. The rubber-coated handle is super-durable and provides an extra-secure contoured grip. The handle has built-in hand protection and is perforated in both the front and back so you can attach a carrying lanyard to it. It features a black sheath with comfortable nylon straps.
Intended use: hard utility
Type of production: China industrial
Blade: 65Mn carbon steel
Blade treatment: Teflon coating
Handle: rubber
Blade length: 254mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 406mm.
Balance: advanced to 7.5cm.
Weight: 521g.
Closure: -
Clip: -
Sheath: Nylon GFN
Note:KE1077 -
Wander Tactical - Haast Eagle 2.0 - Black Blood & Black Micarta - custom knife
Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Black Blood
Handle: Micarta
Blade Length: 152mm.
Blade thickness: 5mm.
Total length: 297mm.
Balance: Advanced
Weight: 409g.
Sheath: Kydex, thermoformed, with M.O.L.L.E. compatible belt loop.
Package: unpacked, supplied with its own certificate of authenticity
Notes:Each knife is unique and handcraftedWT-HE2-BBBM -
Fox - Terzuola - Liner Lock Micarta - FX-525MI - knife
Intended Use: Sporting
Production type: Industrial
Blade production: Italy
Blade: Becut stainless steel
Surface Treatment: Beadblasted
Handle: Green Micarta
Blade length: 8.9mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 200mm.
Thickness when closed: 14.5mm
Weight: 105g.
Closure: Liner Lock
Clip: Steel wireclip
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Bob TerzuolaFX-525MI -
Pavoni - Circles - Silicone mould eclair-circles - 10 impressions
Pavoni - Circles - Silicone mould eclair-circles - 10 impressions
Pavodecor is the new 2022 line by Pavoni
Each mould is thought to enrich and decorate éclairs, monoportions and cakes.Light and essential designs, that will transform your creations in unique and personalized proposals.
Precise and easy-to-make moulds for use with chocolate, biscuit mixes and other pastry preparations. Make your cake unique, no limits to fantasy, the password is to experiment!
Line: Pavodecor
Design: CIRCLES ECLAIR
Material: 100% platinic silicone, suitable for food contact
Mould size: 30 x 17,5 cm
Number of impressions: 10
Single impression size: 12 x 2,5 cm H 2 mm
Single impression volume: 2.2 ml
Mould features: Suitable for fridge/freezer/killer
Suitable for oven/microwave oven
Temperature range: -40°C/+250°C
Dishwasher safe, no rinse aid required
Non-toxic, odourless and tasteless
Flexible and space-saving
Unbreakable and long-lasting.
PR006 -
Pavoni - Hearts - Silicone mould eclair-hearts - 10 impressions
Pavoni - Hearts - Silicone mould eclair-hearts - 10 impressions
Pavodecor is the new 2022 line by Pavoni
Each mould is thought to enrich and decorate éclairs, monoportions and cakes. Light and essential designs, which will transform your creations in unique and personalized proposals.
Precise and easy-to-make moulds for use with chocolate, biscuit mixes and other pastry preparations. Make your cake unique, no limits to fantasy, the password is to experiment!
Line: Pavodecor
Design: Hearts
Recommended for decoration
Material: 100% platinic silicone, suitable for food contact
Mould size: 30 x 17,5 cm
Number of impressions: 10
Impression size: 12 x 2,7 cm H 2 mm
Single impression volume: 2.6 ml
Mould features:
Suitable for fridge/freezer/killer
Suitable for oven/microwave
Temperature range: -40°C/+250°C
Dishwasher safe, no rinse aid required
Non-toxic, odourless and tasteless
Flexible and space-saving
Unbreakable and long-lasting.
PR009 -
Cold Steel - SR1 Clip Point knife - S35VN - 62L OD Green G10 - folding knife
The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.
It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!
The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel
A good blade needs a good grip, so this model of the SR1 is made from G10.
For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Satin
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62L -
Cold Steel - SR1 Tanto Point knife - S35VN - 62LA OD Green G10 - folding knife
The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.
It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!
The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel
A good blade needs a good grip, so this model of the SR1 is made from G10.
For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Wash
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62LA -
Boker Plus - Papillon Trainer Bali - 01BO352 - training knife
Intended Use: Training
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 420
Blade Finish: Stonewashed
Handle: Stainless steel
Blade Length: 114mm.
Blade thickness: 3.7mm.
Length closed: 138mm.
Total length: 252mm.
Weight: 124g.
Closure: T-latch
Clip: -
Package: Cardboard box with Boker Plus logos
Notes: -BO-01BO352 -
ExtremaRatio - G.O.I. Caimano Nero N.A. Flipper - Knife
NON-automatic version of the Caimano Nero model
The Black Caiman is a tactical knife that Extrema Ratio, official supplier of Comsubin, has developed and delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy. Its name recalls and pays homage to the heroic Caimani Neri del Piave, a department of Arditi of the Regia Marina and other components on a voluntary basis, which during the First World War crossed the Piave River by swimming to carry out raids in enemy territory.
Spear Point" 4 mm blade with asymmetrical rounding and partial sharpening of the counterbore to increase the penetration coefficient. The toothing on the blade allows you to cut cables and fabrics with high resistance preserving the sharpness.
It is a medium folder with a robust structure. The thick aluminum cheeks, thanks to the many processes of removal make the knife light and balanced. The end of the handle, which recalls the shape of the Helix/Timon group of the slow running torpedo (S.L.C.), serves to improve the grip for the rapid extraction of the knife from the pocket.
The DLC-coated titanium clip can be positioned at three different angles on either side to allow for maximum customization of the carry. Its shape is designed to minimize the bulk of the handle outside the pocket.
Among its endowments, besides the carbide glass breaker, there is also a safety, that when inserted, preserves from a dangerous accidental closing of the blade.
Destination of use: Tactical/Military
Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade length: 93mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total lenght: 231mm.
Weight: 180g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Notes: Additional safety stop, when knife is openER-CAI-NA -
Boker - Tiger Damascus knife - 111103DAM - folding knife
Boker Tiger-Damascus adds a very special model to the series of pocket knives steeped in history. Collector's knife with a historical past, a true piece of living history, which combines high quality craftsmanship with authentic materials. Known worldwide as the Tiger, the Panzerkampfwagen VI was used by the Wehrmacht from the late summer of 1942. It is considered to be one of the most famous tanks in history, despite its modest production number of only 1350 units and consequent low importance. strategic. The development of the heavy tank can be traced back to 1937 and series production began in August 1942. Today there are only seven units preserved, on display worldwide.
The tank parts used for the knife blade come from a Tiger I of the Schwere Panzerabteilung 502, which was destroyed in combat in Latvia in the summer of 1944 in a wooded area near the town of Bauska. Based on the wreck found at the original excavation site, it was determined that this Tiger was one of the first models produced.
The straight-cut Boker Tiger-Damascus features a unique Damascus blade made from the steel from the tank destroyed in Bauska. The non-stainless damask mosaic is hand-forged by Chad Nichols and resembles the tank tracks left in the ground by the Tiger's heavy tracks. Unlike conventional damask, damask mosaic production does not create layers, but complex damask bars are hand forged into a mosaic with an elaborate and very complicated process. The blade operates on ball bearings and is locked open by a sturdy steel framelock with stonewash finish.
The overall shape of the knife pays homage to the famous lines of the tank, while the decorative pin screw is modeled on the main drive pinion.
The slightly shaped micarta canvas handle scales feature precisely milled grooves, reminiscent of the characteristic surface texture of the Zimmerit coating of German armored vehicles.
Intended use: Collection
Type of production: Industrial
Country of production: Germany
Blade: Damascus steel from pieces of the Tiger
Handle: in steel and micarta
Blade length: 85mm.
Blade thickness: 3.6mm.
Total length: 198mm.
Weight: 141g.
Clip: in stainless steel
Closure: Frame Lock
Packaging: PVC display case that lets the knife "float" inside, making it visible from all sides
Notes: Certificate of Guarantee - Gray cotton caseBO-111103DAM -
Boker Plus - Zenshin knife - Higonokami - 01BO368 - knife
The elegant Boker Plus Zenshin is reminiscent of the famous Higonokami pocket knives, manufactured in the Japanese city of Miki since 1896. Unlike the original Japanese versions, the body of the knife handle is not made from a single piece of folded metal, but from flat plates in steel with a sturdy stonewash finish. The 440C slipjoint blade has an elaborate two-tone finish. In this version it is equipped with a frame lock. With lanyard hole.
Intended use: Sports
Type of production: Industrial
Country of production: Asia
Blade: 440C stainless steel
Blade treatment: Dual Tone
Handle: in steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 60g.
Clip: -
Closure: frame lock
Packaging: cardboard box with Boker Plus logos
Note: -BO-01BO368 -
Boker Plus - Zenshin 42 Brass knife - Higonokami - 01BO369 - knife
The elegant Boker Plus Zenshin is reminiscent of the famous Higonokami pocket knives, manufactured in the Japanese city of Miki since 1896. Unlike the original Japanese versions, the body of the knife handle is not made of a single piece of folded metal, but of flat plates made of brass with a sturdy stonewash finish. The 440C slipjoint blade has an elaborate two-tone finish. It opens with two hands and does not lock. With lanyard hole.
Intended use: Sports
Type of production: Industrial
Country of production: Asia
Blade: 440C stainless steel
Blade treatment: Dual Tone
Handle: brass
Blade length: 75mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 71g.
Clip: -
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Note: -BO-01BO369 -
Boker Plus - Urban Spillo Flipjoint - men's knife - 01BO469 - knife
Intended use: Sports
Type of production: Industrial
Country of production: Asia
Blade: in 440C stainless steel
Blade treatment: Stonewash
Handle: in steel
Blade length: 76mm.
Blade thickness: 3mm.
Total height of the lung: 176 mm.
Pesos: 67 g.
Clip: removable, in stainless steel
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Note: pinball opening system on ball bearingsBO-01BO469 -
Boker Plus - Connector Titan Knife - 01BO353 - folding knife
The practical Connector of Boker Plus bears the unmistakable signature of the Polish cutler Jakub Wieczorkiewicz, now known all over the world for the quality of his production. The Connector is equipped with a spear point blade, CPM-S-35VN steel, on ball bearings. Made with an excellently machined titanium handle.
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN steel
Blade treatment: satin finish
Handle: Titanium
Blade length: 75mm.
Blade thickness: 3.2mm.
Total length: 176mm.
Weight: 88g.
Clip: removable steel
Closure: frame lock
Packaging: cardboard box with Boker Plus logos
Notes: opening via ball bearing system - design by Jakub WieczorkiewiczBO-01BO353 -
Boker Plus - Kazhan knife by Alexander Krava - D2 - 02BO069 - knife
The Boker Plus Kazhan is designed by Alexander Krava and is a practical neck knife with a short Sheepfood-shaped blade, practical and light, ideal as a back-up tool. The young cutler from Lviv, Ukraine places particular emphasis on the aesthetics of his models, which convince not only as reliable tools but also as high-quality accessories. The skeletonized Kazhan is made of D2 with a dark stonewash finish. Supplied with chain and custom Kydex sheath.
Intended use: Tactical / CQB
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 56mm.
Blade thickness: 4mm.
Total length: 140mm.
Balancing: -
Weight: 62g.
Sheath: For neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Alexander Krava designBO-02BO069 -
Boker Plus - Connector G10 Knife - 01BO354 - folding knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Total length: 176mm.
Weight: 78g.
Clip: removable steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearingsBO-01BO354 -
Boker Plus - Urban Spillo Jade G10 - gentleman's knife - 01BO357 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: in 440C stainless steel
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 176mm.
Weight: 47g.
Clip: removable, in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: pinball opening system on ball bearingsBO-01BO357 -
Be Cool - Cooler bag City Basket T-239 - New colours 2022 - Sunrise Yellow
Be Cool - Cooler bag City Basket T-239 - New colours 2022 - Sunrise Yellow
Be cool - Cool City Basket T-239 The new colour 2022 should already whet your appetite for hiking in the coming spring/summer. The company was founded in January 1997 and in 2000 created the BE COOL line designed by German designer Volker Huntertmark. The products of the BE COOL line are made of quality materials and unique designs, used in many occasions (shopping, camping, leisure, wellness). When you put bottles and food, removed from the fridge, into the BE COOL cool bag, the cool temperature will remain for at least 6-8 hours.
Details:
Be Cool cool bag High-quality EPE material with special insulating properties Water-repellent Very hard-wearing surface Particularly tear-resistant seams
Measurements: 18 x 18 x 15 H cm
Capacity: 4,5 l
CITY BASKET, sunrise yellow The trendy cool bags really put you at ease, because colour is in fashion.
T-239 -
Aitor - Jungle King II Black knife - Black Sheath - 16013 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16013N -
Ilsa - Coffee Maker Carmencita Pop alum. 6 cups - INDUCTION
Ilsa - Coffee Maker Carmencita Pop alum. 6 cups - INDUCTION
The first item produced under the ILSA brand is the iconic Neapolitan coffee maker in 99% pure aluminium, which has become a symbol of regained wealth on the tables of Italians who are returning to coffee after the sacrifices imposed by the world war.
Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.
Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.
The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.
The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.
Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle for use on all hobs
99B06 -
Ilsa - Carmencita Pop coffee maker alum. 3 cups - INDUCTION
Ilsa - Caffettiera Carmencita Pop aluminium 3 cups - induction
The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.
The first item produced under the ILSA brand is the iconic Caffettiera Napoletana made of 99% pure aluminium, which has become a symbol of a regained wealth on the tables of Italians who are drinking coffee again after the sacrifices imposed by the world war.
Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.
Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.
The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.
The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.
The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on all hobs and is perfect for an important gift thanks to its worldwide recognised Lavazza brand.
99B03 -
Ilsa - Carmencita Pop Aluminium 2 cups coffee maker - induction
Ilsa - Carmencita Pop Aluminium 2 cups coffee maker - induction
The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.
The first item produced under the ILSA brand is the iconic Caffettiera Napoletana in 99% pure aluminium, which has become the symbol of a regained wealth on the tables of Italians who are returning to drinking coffee after the sacrifices imposed by the world war.
Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.
Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.
The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.
The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.
The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on all hobs and is perfect for an important gift thanks to its Lavazza brand, recognised throughout the world.
99B02 -
Ilsa - Aluminium Neapolitan Coffee Maker 6 cups - Made in Italy
The historic Caffettiera Napoletana is still one of the best-known symbols of Italian style in the world.
Before the moka, which has speeded up the preparation of coffee, the famous black drink was prepared with the Neapolitan coffee pot, first made of copper and then of steel or aluminium. The method of preparation is not very different from that of filter coffee, but a series of particularities make it a unique product of its kind.
NEAPOLITAN COFFEE POT 6 CUPS IN ALUMINIUM
The Neapolitan is a type of coffee maker that, unlike the mocha, does not use the pressure generated by steam to push the water towards the coffee, but only the force of gravity. How to use the Neapolitan coffee maker It is necessary to explain in detail the use of this coffee maker because, as we said, it requires a different procedure compared to the now common coffee makers. The main reason is that the cuccumella is formed by different elements that are: the hollow tank where you put the coffee powder, the perforated tank that holds the water and the hollow tank, the coffee filter to be screwed on top of the hollow tank, the coffee pot from which the ready coffee comes out and the lid.
The procedure then consists of the following steps:
1) Fill the hollow tank with coffee powder, reaching the indicated limit and without crushing the powder.
2) Screw the filter on top of the tank.
3) Fill the perforated tank with water, always up to the indicated limit.
4) Insert the hollow tank into the perforated tank.
5) Add the body with the cap and screw in.
6) Place on the side with the water tank.
7) When the water starts coming out of the hole in the tank, turn off the flame and turn the Neapolitan coffee maker. To perform this operation it is important to have a firm grip, protect yourself with potholders to avoid burning yourself and turn the cuccumella upside down in one go.
8) Check the coffee tank and when there is no more water, unscrew the other tank, place the lid on it and pour the coffee.
40060 -
Ilsa - Aluminium Neapolitan Coffee Maker 3 cups - Made in Italy
The historic Caffettiera Napoletana is still one of the best-known symbols of Italian style in the world.
Before the moka, which speeded up the preparation of coffee, the famous black beverage was prepared with the Neapolitan coffee pot, first made of copper and then of steel or aluminium. The method of preparation is not very different from that of filter coffee, but a series of particularities make it a unique product of its kind.
CAFFETTIERA NAPOLETANA 3 CUPS IN ALUMINIUM
The Neapolitan is a type of coffee maker that, unlike the mocha, does not use the pressure generated by steam to push the water towards the coffee, but only the force of gravity. How to use the Neapolitan coffee maker It is necessary to explain in detail the use of this coffee maker because, as we said, it requires a different procedure compared to the now common coffee makers. The main reason is that the cuccumella is formed by different elements that are: the hollow tank where you put the coffee powder, the perforated tank that holds the water and the hollow tank, the coffee filter to be screwed on top of the hollow tank, the coffee pot from which the ready coffee comes out and the lid.
The procedure then consists of the following steps:
1) Fill the hollow tank with coffee powder, reaching the indicated limit and without crushing the powder.
2) Screw the filter on top of the tank.
3) Fill the perforated tank with water, always up to the indicated limit.
4) Insert the hollow tank into the perforated tank.
5) Add the body with the cap and screw it on.
6) Place on the side with the water tank.
7) When the water starts coming out of the hole in the tank, turn off the flame and turn the Neapolitan coffee maker. To perform this operation it is important to have a firm grip, protect yourself with potholders to avoid burning yourself and turn the cuccumella upside down in one go.
8) Check the coffee tank and when there is no more water, unscrew the other tank, place the lid on it and pour the coffee.
40030N -
Decora - Bake & cook line bread mold
Decora - Bake & cook line bread mold
Mold with high quality non-stick coating. Simple to use, it is perfect for making bread and both sweet and savory dishes. The small holes on the handles of the mold allow you to overlap another pan using it as a lid.
Dimension: 37 x 20 xh 7 cm
0125735 -
CRKT - Folts Minimalist Drop Point Black - 2384K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 2.6mm.
Total length: 133mm.
Weight: 49g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2384K -
Antonini knives - Old Bear - Roncola 17cm Walnut - 9747 / 17LN - knife
Old Bear ™ is the new and exclusive line of pocket knives produced by Antonini from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is made using traditional production techniques with a high level of manual skills.
Type of production: semi artisanal
Country of production: Italy
Blade: 420 stainless steel 54/56 HRC
Handle: in American walnut wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 115mm.
Thick when closed: 22mm.
Total length: 175mm.
Weight: 55g.
Closure: in brass, with lock both in opening and closingThe handles are made of oiled American walnut wood while the blade made of stainless steel, sharpened and hand-picked on the stone by skilled craftsmen.
Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.
This product was built by subjecting the necessary raw materials to artisanal treatments such as to make every single knife unique, original and non-standardized. Any surface irregularities represent the confirmation of our manual processing and do not absolutely affect the operational functionality of the tool.
9747/17LN -
Spyderco - Manbug Wharncliffe Black TiCN - SCMBKWPBK - knife
Intended Use: Sporting/EDC
Production Type: Industrial
Blade production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Black TiCN - Titanium Carbonitride
Handle: FRN
Blade Length: 49mm.
Blade thickness: 2.5mm.
Length closed: 64mm.
Total lenght: 113mm.
Thickness when closed: 8mm.
Weight: 19g.
Closure: Back Lock
Clip: -
Package: cardboard case with Spyderco logos
Notes: -SMWBK -
Ka-Bar - Mini Dozier Folding Hunter knife 4072ZG - Zombie Green - knife
Intended use: tactical
Blade: AUS 8A stainless steel
Handle: Zytel
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed length: 87mm.
Total length: 147mm.
Balancing:
Weight: 22g.
Closure: back lock
Opening: -
Clip: in steel
Design: by Bob DozierProduction: Taiwan
The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-4072ZG -
Pavoni - Pavodecor mould line for Hearts 2 - 15 indents
Pavoni - Pavodecor mould line for Hearts 2 - 15 indents
Each mould is thought to enrich and decorate éclairs, monoportions and cakes. Light and essential designs that will transform your creations into unique and personalised proposals. Precise and easy-to-make moulds for use with chocolate, biscuit mixes and other pastry preparations. Make your cake unique, no limits to fantasy, the password is to experiment!
Line: Pavodecor
Design: Hearts
Recommended for decoration MONOPORATION
Material: 100% platinic silicone, suitable for food contact
Pavodecor mould line for single serving portions decoration heart
subject Ø mm 50x2 h ~ 1,6 ml
Mould size: 30 x 17,5 cm
Mould features: Suitable for fridge/freezer/beater
Suitable for oven/microwave
Temperature range: -40°C/+250°C
Dishwasher-safe, no rinse aid required
Non-toxic, odourless and tasteless
Flexible and space-saving
Unbreakable and long-lasting.
PR008 -
Fallkniven - FDC - Double sharpener - diamond (25 microns) and ceramic (9 microns) - sharpening accessory
Support with two different bars, one in ceramic and one in diamond.
The yellow diamond sharpening stone (25 microns) is used to make a fine sharpening, with the white ceramic stone (9 microns) the edge of the knife is polished in order to obtain a razor-sharp edge.
For cleaning, use some dish soap and hot water.
Dimensions of the diamond / ceramic part:
10 cm x 2 cm
Total size open with plastic handle:
22 cm
Closed size:
12 cm x 3 cm
Weight: 65 gr
F-FDC -
Fallkniven - FDD - Double diamond sharpener - 25 and 44 microns - sharpening accessory
Diamond sharpening with two different sharpening grits.
The yellow surface consists of titanium and aluminum nitride which greatly prolongs the life of the sharpener. The rough side (44 microns) is used to recover more damaged cutting edges, while the fine side (25 microns) is used for precision sharpening.
For cleaning, use dish soap and warm water.
Like all diamond sharpeners, this whetstone is a little rough at first, but gets smoother after a period of use.
Dimensions of the diamond part:
10 cm x 2 cmTotal open size with plastic handle:
22 cmClosed size:
12 cm x 3 cm
Weight: 67 grF-FDD -
Cold Steel - SR1 Lite Tanto Point knife - 62K1A - folding knife
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62K1A -
Cold Steel - SR1 Lite knife - 62K1 - folding knife
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62K1 -
Pavoni - PAVODECOR mould Circles 2 - 15 indents
Pavodecor is the new 2022 line by Pavoni realized in collaboration with brand Ambassador Frank Haasnoot, dedicated to decorations!
There is a special lightness to Frank Haasnoot's talent. The unique touch of Dutch World Chocolate Master is now in Leaves and Circles creations, created in collaboration with Pavoni Italia. Reproduce the elegance of his preparations through thin and refined weaves, a perfect addition to your creations
Each mould is thought to enrich and decorate éclairs, monoportions and cakes.
Light and essential designs that will transform your creations into unique and personalised proposals. Precise and easy-to-make moulds for use with chocolate, biscuit mixes and other pastry preparations.
Make your cake unique, no limits to fantasy, the password is to experiment!
PR005 - CIRCLES2 SKU PR005S
There is a special lightness to Frank Haasnoot's talent.
Ø mm 50x2 h
~ 1,5 ml
15 indents.
PR005 -
Cold Steel - Mini Tuff Lite knife - Green - 20MTGD - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: Satin finish
Handle: Grivory (Griv-Ex)
Blade length: 35mm.
Blade thickness: 3mm.
Closed length: 76mm.
Total length: 126mm.
Weight: 41g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Cold Steel logos
Note: -CS20MTGD -
Fox - Pro Hunter Fixed Knife - Black Micarta - FX-131MBSW - knife
Intended use: Utility / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690Co 58 / 60HRC stainless steel with stonewash finish
Handle: Black Canvas Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: advanced to 1cm
Weight: 190g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -FX-131MBSW -
Victorinox - Mini Tool Fireant Set - Fire Starter Set - 4.1330.B1 - Tortoise Gear
3 Mini Firestarters and 6 lures "made in USA" by Tortoise Gear for Victorinox
THE SET:
Compact and essential set for lighting fires outdoors, plug into the corkscrew of your victorinox. 3 different waterproof and luminescent helical lighters (they store sunlight and release it in the dark) with 6 different firelighters lures.Thickness: 8mm
Length: 27mm
Weight: 5gUSES:
Designed for the outdoorsm allow you to light an emergency drone in any outdoor conditions of humidity and altitude. Each tinder can light approximately 100 fires; each decoy can be used 1.5/2 times per fire.COMPATIBILITY:
Compatible with any 84mm, 85mm, 91mm and 111mm Victorinox utility knife equipped with the corkscrew accessoryV-4.1330.B1 -
Dovo - Men's beard and mustache set
DOVO men's beard and mustache set.
This set contains an elegant brown water buffalo leather case with a safety razor, replacement blades, mustache scissors, and a beard comb. Compact and lightweight, this is a convenient way to stay groomed when traveling. These pieces are made by Solingen master grinders under most rigid control, from the finest, hot forged special steel. Made in Solingen, Germany.
508056 -
Victorinox - Iconic Straight-Blade Peeler REX - 6.09.00
Iconic Straight-Blade Peeler Rex
Since 1947, the iconic REX Peeler has been helping home cooks work quickly yet safely in the kitchen. With an ultra-sharp blade and ergonomic handle, it offers optimum ease and comfort. And because it cuts so close to the fruit or vegetable’s skin, it preserves the inherent vitamins. With such an illustrious past, we’re delighted to bring the REX into Victorinox’s exciting future.
Key features
Lightweight peeler with iconic design
Ergonomically shaped for maximum ease and comfort
Ultra-sharp blade makes peeling smooth and easy
Item number 6.0900.1
Size 110 x 65 x 12 mm
Weight 14 g.
V-6.09.00 -
Sanelli Premana - Pizza and Farinata Knife 8cm - 3376.08 - kitchen knife
The 3376.08 pizza and porridge knife from Sanelli Premana is an ideal kitchen knife for cutting pizza, porridge and other similar dishes. The 8-cm wide blade is made of high-quality stainless steel with a hardness of 54-56 HRC, which ensures long edge life.
The blade features sharp, precise teeth designed to easily cut through even the crispest pizzas. The ergonomic handle made of polypropylene, a durable, non-slip material, provides a firm and comfortable grip during use.
Sanelli Premana is an Italian company specializing in the production of high-quality kitchen knives used in both professional and domestic settings. Their products are known for their reliability, durability and precision, and are highly valued by restaurant professionals worldwide.
Recommended Use: pan cutting of pizza, pinsa and Ligurian farinata
Country of manufacture: Italy
Blade: made of surgical stainless steel with a hardness of 54-56 HRC
Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive
Blade length: 80mm.
Total length: 180mm.
Packaging: cardboard blade cover with Sanelli logos
Weight: 33g.
s337608 -
Boker Plus - Cataclyst Flipjoint Knife - 01BO675 - folding knife
The Boker Plus Cataclyst Flipjoint features a flipper opening blade, it does not lock when open, but is simply held securely in place by a retaining ball. With appropriate pressure on the back of the blade, the blade can be folded back without releasing a locking device.
The sleek design features a textured black G10 grip that is three-dimensionally milled and has a weight-saving recess inside. Supplied with a deep pocket clip and a drawstring hole.
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: satin finish
Handle: steel and G10
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 173mm.
Weight: 77g.
Clip: monolithic, removable
Closure: slipjoint
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearingsBO-01BO675 -
Fox - Sekira Axe - C45 Carbon Steel and Hickory - FX-701 - Axe
Yankee & Sekira - a hatchet and an axe.
The key difference between the two? The former can be used with one hand while the latter is built to be used with two hands ensuring maximum power.
Axes and hatchets are excellent and easily transportable tools, thanks to their small size, that can be used in many ways: cutting small trees, dissecting wood and carving and, in extreme cases, as personal defense.
The two new Fox models have blades forged in C45 steel, the handle in American walnut and are accompanied by leather sheaths made in Italy.
Intended Use: Hiking / SportingProduction type: Industrial
Country of production: Italy
Blade: Carbon steel 1045 / C45
Blade treatment: Blackwashed
Handle: Hickory Wood (American Walnut)
Blade length: 11cm.
Blade thickness: 3.75cm.
Total length: 60cm.
Weight: 1520g.
Sheath: leather blade cover, made in Italy.
Package: cardboard box with Fox Knives logos
Notes: -FX-701 -
Pavoni - Silicone mold Pavoflex line - SLAKE
Pavoni - Stampo in silicone SLAKE - fetta di torta - 8 impronte
Il talento di Nicolas Bacheyre per un’idea di geniale semplicità.
La tradizionale fetta di torta diventa protagonista moderna grazie a Slake, il kit composto da stampo in silicone e coppapasta per base e inserto.
Nasce così la possibilità di creare tante interpretazioni differenti, da affiancare in un’unica, speciale composizione.
Stampo dim. 114 x 39 x h 20 mm
Vol. 50 ml
8 impronte
Coppapasta incluso.
PX3214 -
Pavoni - FORMASIL - Silicon microperforated mould 600x400 - 12 square imprints
Pavoni - FORMASIL - Silicon microperforated mould 600x400 - 12 square imprints
FF02 Square Shapes
FORMASIL: the new line of micro-perforated moulds, 600x400 mm in size. The project meets the needs of flexibility, rationalisation and creativity.
GENIUS AND CREATIVE: enhances the creativity of the professionals, boosting their interpretation ability and their identity.
FLEXIBLE AND MULTI-PURPOSE: provides endless versions and combinations. Ideal for sweet and savoury products, from tartlets to brioches, from classic to modern cakes, round or square, for classic or contemporary recipes.
PRACTICAL AND FAST: is easy to use, ensures high production yield, homogeneous baking, excellent rising and perfect shapes of the final creations, avoiding bubbles, sticking and border collapsing.
12 indents
vol. 127 ml.
FF02