Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

The outstanding Boker Plus Fragment convinces as a light EDC or backup knife with an extremely reduced design.

The practical pocket knife completely dispenses with a front handle and instead relies on a minimalist rod that connects the blade axis screw.

The blade is made from 9Cr13CoMoV steel and, like the entire all-steel tang construction, is finished in a dark stonewash finish.

The operational safety of the modern slipjoint pocket knife is further enhanced by a 90 degree stop device when opening and closing the blade. Equipped with hole for lanyard and practical clip for transport.

Intended use: EDC / Sport

Type of production: Industrial
Country of production: Taiwan
Blade: 9Cr13MoV stainless steel
Blade treatment: blackwash
Handle: titanium
Blade length: 50mm.
Blade thickness: 2.5mm.
Total length: 130mm.
Weight: 31g.
Clips: -
Closure: Slip Join
Packaging: cardboard box with Boker Plus logos
Note: -

The distinctive design, the Tracker concept with two separate blades, the impact-resistant 1095 carbon steel and the remarkable price-performance ratio quickly made Dave Wenger's Boker Plus Mini Tracker a top seller in the bushcraft and outdoor scene. While the front of the larger Tracker variants is primarily suitable for chopping and splitting, the blade shape of the smaller size of the new Boker Plus Micro Tracker shows completely different advantages and qualities.

The Micro Tracker shares the benefits of two sharpening angles on one blade with its bigger brothers. Additionally, the front half of the blade in the smaller format is great for working on a chopping board and the sturdy tip is great for opening boxes in everyday use. The small nose, which separates the two grinds, pulls hard when cutting in soft materials and is predestined for cutting ropes, lines and belts.

The field and 3D archer appreciates the compact size, powerful point and archaic look when working out the wrong arrows. The Boker Plus Micro Trapper has the same indestructible materials and finish as the Mini Tracker.

The three hollow brass studs carefully recessed and chamfered into the handle add visual flair. Supplied with a belt adapter and sheath

Intended use: Utility

Type of production: Industrial
Country of production: Taiwan
Blade: 1095 steel ful tang
Blade finish: powder coat
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 159g.
Sheath: Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dave Wenger

Sincerity, courage, and kindness are among the traditional basic virtues that still enjoy a high status in Japanese society today. Knifemaker Kansei Matsuno incorporates these values ​​into the Boker Plus LFL07 and creates a noble gentleman's knife full of grace and style.

Featuring a CPM-S-35VN metallurgical powder hollow blade with a fine finish, the pocket knife tackles any cutting task sublimely.

The eye-catcher and visual highlight of the Boker Plus LFL07 is the grey-brown handle made of FAT carbon, which is interspersed with gold-colored nuances and consistently continues the fine line of the folding knife.

The reliably and harmoniously functioning stainless steel linerlock completes the overall look of the collector's knife, which is limited to 500 pieces in Europe.

The deep carry clip made of brushed stainless steel allows flip-up carry (r) and is functionally supported by the lanyard hole.

Intended use: EDC / Sport

Type of production: Industrial
Country of production: Taiwan
Blade: CPM S35VN stainless steel
Blade treatment: satin finish
Handle: Carbon Fiber
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 53g.
Clips: steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno - Limited edition of 500 pieces

Brad Zinker riesce sempre a scoprire nuove sfaccettature del popolare Boker Plus Urban Trapper. In qualità di maestro coltellinaio, il designer di coltelli statunitense sa meglio di chiunque altro come reinventare i design esistenti di coltello gentleman con combinazioni intelligenti di materiali.

Il Boker Plus Urban Trapper Jigged Titanium è dotato di una lama VG-10 con superficie rettificata e cuscinetti a sfera con una finitura sottile, che si apre con un flipper ed è fissata da un robusto linerlock.

Un accento moderno è dato dall'impugnatura in titanio, che rende omaggio agli innumerevoli classici con guancette in osso jigged. Questo non solo posiziona visivamente il coltello in primo piano, ma migliora anche in modo significativo la sensazione del coltellino tascabile.

La clip per il trasporto profondo in acciaio inossidabile consente il trasporto ribaltabile (r) ed è rifinita con una finitura stonewash.

Destinazione d'uso: Gentleman / Sportivo

Tipo di produzione: Industriale
Paese di produzione: Taiwan
Lama: in acciaio inox VG10
Trattamento lama: satinatura
Manicatura: frame in titanio con guancette in titanio
Lunghezza lama: 88mm.
Spessore lama: 2.5mm.
Lunghezza totale: 195mm.
Peso: 78g.
Clip: in titanio
Chiusura: Liner lock
Confezione: scatola di cartone con loghi Boker Plus
Note: Design by Brad Zinker

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel CPM-S-35VN
Blade treatment: satin finish
Handle: steel liners and titanium grips
Blade length: 77mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 116g.
Clip: removable stainless steel
Closure: button lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley - manual opening system via carson flipper system on ball bearings

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: 110-layer stainless damascus steel
Blade treatment:-
Handle:stainless damascus steel
Blade length: 64mm.
Blade thickness: 2mm.
Total length: 141mm.
Weight:40g.
Clip:stainless damascus steel, removable
Closure: FrameLock with stainless steel clapper
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: 110-layer stainless damascus steel
Blade treatment: satin finish
Handle: Titanium 
Blade length: 78mm.
Blade thickness: 3.8mm.
Total length: 173mm.
Weight: 76g.
Clip: stainless steel, removable
Closure: FrameLock with stainless steel clapper
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings

Marker training knife, ideal tool for training in the various personal defense disciplines, military training or to be used for soft air.

Thanks to the marker placed on the edge, at the tip and for 2 cm on the back of the blade, it is possible to mark the affected area with extreme precision.

Intended use: training and sports use

Type of production: Industrial
Country of production: Italy
Materials: 15% glass fiber reinforced Nylon plastic material
Blade length: 90mm.
Blade thickness: 8mm.
Total length: 225mm.
Weight: 120g.
Sheath: 15% glass fiber reinforced Nylon plastic with belt clip and possibility of 360° rotation
Packaging: knife, sheath, screwdriver, ink refill, interchangeable plastic blade, 2 fiber blades for marker use
Notes: Design by Roberto Risicato

Specifications:

* autonomy of one recharge up to 400 cuts
* 1.5 mm thick stainless steel insert to give rigidity and weight
* custom logo
* red ink
* washable non-toxic and anti-allergenic ink
* red ink

* serrated blade to distinguish
- threat - - - - - -
- assault -----------

* 15% glass fiber reinforced Nylon plastic material

* interchangeable blade
- fiber for marker use
- plastic

For multiple purchases the training knife can be customized with logos

Extrema Ratio S-THIL Black Warfare, a special version of the S-THIL model, is a backup knife with a monolithic structure machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with the designer Thilo Arnd Schiller. The spear point type blade is hardened to 58 HRC in order to obtain the best balance between edge retention and strength, has a false edge in the upper part which enhances the characteristics of penetration and tip work, and is equipped with a Full length furrow flowing elegantly from blade to grip.

The blade is milled integrally with the knife to enhance its compactness and lightness, maintaining a minimum thickness even with a profile that recalls the classic Extrema Ratio handle. This profile forms two small guards and a comfortable thumb rest in order to prevent the hand from slipping towards the blade. On the end there is a skull crusher with a diamond-shaped tip and a slot that allows you to attach a wrist strap to the knife or to equip the handle with paracord winding.

The special Black Warfare version uses the innovative and original Geotech Camo pattern, created by laser engraving. The molded nylon sheath has been designed to be extremely flat and with very small lateral dimensions, in order to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the cutting edge of the blade to the right or left. The double retention system integral with the sheath is made up of four pressure elements that work only two at a time, depending on right/left use, while in the nylon textile part there is a button that allows you to secure the knife to the sheath . The end of the sheath has a hole that allows you to expel liquids or residues inside. The possibility of applying belt clips, ulticlips, malice clips makes it extremely versatile. It is also possible to hook the sheath to the M.O.L.L.E. system. weaving the paracord lanyard.

The S-thil Black Warfare is supplied in an IP67 certified watertight Polypropylene technical case, with pressurization valve, resistant to atmospheric agents, dust and shocks. Inside there are also the Nylon sheath, the double ULTICLIP and the double grain sharpening plate (ceramic abrasive and synthetic diamond).

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade treatment: BURNISHING MIL-C-13924 GEOTECH CAMO
Handle: N690 steel
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: in Kydex, with double multiposition ULTICLIP attachment clip
Packaging: Polypropylene case with S-Thil / Extrema Ratio logos
Notes: exclusive briefcase to celebrate the company's 25th anniversary

Intended Use: Sporting

Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Satin finish
Handle: Zebrano wood
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 202mm.
Weight: 70g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper opening system - Design by Grigorii Matveev

Intended Use: Sporting

Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: G10
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 202mm.
Weight: 75g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper opening system - Design by Grigorii Matveev

Intended Use: Sporting

Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: aluminum
Blade length: 83mm.
Blade thickness: 3mm.
Total length: 191mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii Matveev

Intended Use: Sporting

Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: aluminum
Blade length: 83mm.
Blade thickness: 3mm.
Total length: 191mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii Matveev

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii Matveev

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: satin finish
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii Matveev

Escape from everyday life and find your inner soul: Suiseki is a meditative art form from Asia that presents expressive stones in a particularly effective way. The calming character emanates from the natural shape of the stones, ranging from abstract to impressive representations of landscapes, animals or plants.

Knife designer Darriel Caston expands the spiritual level with a steel and plastic creation and introduces the Boker Plus Suiseki, a compact everyday knife full of sweetness and energy.

With stoic calm, the ball-bearing D2 blade with a chisel grind cuts through the tasks of everyday life and relies on the sure grip of the stainless steel frame lock. Asceticism and function determine the shape of this pocket knife, which maintains a modern impulse with G10 scales.

Intended use: EDC / Sport

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin
Handle: G10
Blade length: 39mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 64g.
Clips: -
Closure: Frame lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Darriel Caston

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Stonewashed
Handle: G10 Two-tone
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Weight: 105g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended Use: Sporting / Hunting

Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Carbon Fiber
Blade length: 67mm.
Blade thickness: 3.5mm.
Total length: 167mm.
Weight: 100g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"

Intended use: sporting/collection

Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co 58HRC
Blade finish: Stone Washed
Handle: G10
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Sleeve thickness: 16mm
Weight: 110g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip pouch
Notes: Design by Jesper Voxnaes

Essential accessories to keep knives in good condition

This maintenance kit contains a range of useful accessories to keep your knives in good condition.

The metal box contains:

- a Pyrenean whetstone for sharpening the blades 14 x 5 cm

- a can of oil to lubricate and lubricate the entire knife

- a 20 x 20 cm microfiber cloth for cleaning after maintenance

A cleverly designed kit and a great gift idea.

Intended use: sports/collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M398 61HRC
Blade finish: Satin
Handle: HDL carbon fiber
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Sleeve thickness: 16mm
Weight: 106g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip pouch
Notes: Design by Jesper Voxnaes

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: Black G10 with removable orange paracord
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 239g.
Sheath: Kydex, with Tek-Lok attachment
Packaging: cardboard box with BlackFox logos
Notes: Fire starter included, to be inserted in the scabbard - Design by Alfredo Doricchi

For the big game hunter who stalks prey through the forest, every gram counts. Try the brand new 15600OR Raghorn ™ ️, an ultralight fixed blade knife made for working large animals.

This lightweight hunting knife bares ultra sharp 14 degree CPM-CruWear®️ steel for exceptional cutting performance with high edge life. Cerakote®️ high visibility orange and lightweight carbon fiber add to an uncompromising hunting knife, ready and perfectly suited for any hunting use.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: USA
Blade: CPM-CruWear® carbon steel (63-65)
Blade finish: Cerakote®️ orange
Handle: Carbon Fiber
Blade length: 116mm.
Blade thickness: 2.3mm.
Total length: 2.28mm.
Weight: 22.5g.
Sheath: kydex
Packaging: Cardboard box with Benchmade logos
Note: -

Ferri taglienti è un viaggio dedicato al mondo del coltello che inizia da lontano, dalle città storiche protagoniste della produzione artigianale e arriva fino alle figure più moderne del knife maker e del knife designer.

Attraverso una serie di incontri con esperti del settore, veniamo introdotti in due diversi contesti: uno di carattere storico, partendo dal tema della “spada del popolo” e delle scuole di scherma tradizionale, l’altro più attuale, con una analisi dei crimini con arma da taglio tra odio, femminicidio e active killers.

Si continua parlando di Bushcraft e sopravvivenza, per passare infine a simbolismo, magia e superstizioni. Un libro dedicato al coltello che, invece di recidere, diventa il legame tra differenti realtà storiche e territoriali.

E' presente un completo GLOSSARIO con la terminologia specifica legata al mondo del coltello.

Scritto da Claudio Colombo: appassionato e collezionista di coltelli, formatore istituzionale e tecnico sportivo per l'Unione Italiana Tiro a Segno. Collabora con la rivista Coltelli e con il blog online ultimateknivesandgear

Pagine: 189

The Boker Plus Mini Tracker, designed by Dave Wenger, has quickly become a favorite in the bushcraft camping and dust scene, as a sturdy outdoor activity knife thanks to the massive 1095 carbon steel blade and corrosion resistant coating. The large Boker Plus Tracker is following in the footsteps of the small ... same materials, same features, but with unmatched performance! The massive survival knife blade features two different bevel surfaces, ideal for cutting, scraping, digging and prying. The optimal balance between the thickness, the length of the blade and the ergonomic shape of the finely worked micarta handle, allow you to work effortlessly even in extreme environments. The handle has three decorative brass hollow rivets, the back of which can be used as a lanyard hole. Supplied with a belt adapter and a custom made Kydex sheath.

Intended use: Utility

Type of production: Industrial
Country of production: Taiwan
Blade: 1095 steel ful tang
Blade finish: a powder cover
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 310mm.
Weight: 469 g.
Sheath: in the Kydex
Packaging: cardboard box with Boker Plus logos
Note: design by Dave Wenger

With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.

TWO DISCS

DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable

CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.

SUPERIOR EFFICIENCY

Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.

HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.

TWO DISCS

DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable

CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.

SUPERIOR EFFICIENCY

Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.

HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.

TWO DISCS

DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable

CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.

SUPERIOR EFFICIENCY

Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.

The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.

TWO DISCS

DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable

FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable

SUPERIOR EFFICIENCY

Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.

20 ° SHARPENING ANGLE FOR STABLE SHARPNESS

The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.

THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING

The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.

Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.

The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.

The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.

Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.

This item is not compatible with HORL ® 2 CRUISE.

Strop: Measurements: 25 x 5 cm - Thickness: 5mm

Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.

Measurements: 25 x 5 cm - Thickness: 5mm

When Boker designed this Boker BRONCO fixed outdoor knife, it set ambitious goals;

- Universal and optimal usability for all professional outdoor users such as bushcrafters, campcrafters, survivalists, hikers, hunters, SAR teams and others. - A CPM steel blade, a handle that fits comfortably in your hand even when working for long periods of time. A quality leather sheath that can be worn with or without a pendant. 100% production in Solingen / Germany

- The CPM-3V was developed by Crucible Industries LLC - a world leader in the 62-63 HRC sintered metallurgical steel market.

The universal wide point blade with high saber sharpening has always been the hunter's favorite shape for both large and small game and is suitable for both precision and heavier tasks. The tang is continuous and protrudes a few millimeters from the end of the handle. This ensures maximum stability and the tang can withstand even powerful blows with a log or other object.

TPE - thermoplastic elastomer - was chosen as the material of the handle, which completely encloses the tang and has a structure that guarantees a good grip in any load direction. TPE is strong, elastic, non-slip and has low thermal conductivity.

The knife features a leather sheath featuring a 9.3cm metal firelighter from market leader Light My Fire, which fits into a large, snug leather ring firmly integrated into the piping.

These features make the BRONCO Boker a tool for survival in an environment also of wild nature, compact, versatile and complete, at the height of any situation.

Intended use: Utility

Type of production: Industrial
Country of production: Germany - Solingen
Blade: CPM 3V 62 / 63HRC ful tang
Blade finish: Satin
Handle: TPE
Blade length: 113mm.
Blade thickness: 3.4mm.
Total length: 230mm.
Weight: 147g.
Sheath: in leather, with flintlock
Packaging: cardboard box with Boker logos
Note:

The Messerschmitt Bf 109 was built from 1935 onwards and, with a production of around 33,000 aircraft, is the most widely produced fighter aircraft in the history of aviation. Officially, the type designation Bf 109 was never changed, even after BFW was renamed Messerschmitt AG. However, since all aircraft types later developed by Messerschmitt were given the model abbreviation ME, the name ME 109 also became established in the public consciousness for the Bf 109. In the 1930s, it marked the step towards a new generation of low-wing fighter aircraft with a closed pilot's cockpit, retractable landing gear and an all-metal construction of wings and fuselage. This new structure withstood far greater loads than the fabric-covered tubular constructions that had been common up to then, which also had the disadvantage of immense air resistance due to the necessary transverse bracing. As a result, the Messerschmitt's more compact and stable design allowed higher speeds with tighter radii during the cornering and dive maneuvers so crucial to fighter pilots. The Bf 109 was armed with two 20 mm MG FF machine guns in the wings and two 7.92 mm MG 17 machine guns. The latter were mounted directly in front of the pilot and coupled via an interrupter gear to the propeller shaft of the 1,000 hp Daimler V12 engine. In this way it was possible for the MGs to fire through the circular path of the spinning propeller without the projectiles hitting the rotating propeller blades. The MGs were thus very close to the pilot's line of sight. The pilot's seat was steel-plated inside the fuselage area to protect it from enemy fire.

The steel we were able to obtain for our Damascus project came from an E-series Messerschmitt Bf 109 that was shot down by a Royal Airforce Supermarine Spitfire in 1940 during the Battle of Britain near the village of Ashford in the British county of Kent. The specific parts are the rear plate of the pilot's steel-plated seat and the bearing sleeve of the propeller shaft. These are forged by Chad Nichols into a high-carbon, high-cut 80-layer Damascus.

The Boker Plus ME 109 Damascus picks up numerous design elements of the legendary Messerschmitt. The opening at the back of the blade base has the unmistakable shape of the pilot's cockpit and is visible when the knife is closed and open. The folds in the sheet metal of the engine cowling as recesses for the barrel soul axles of the two MG 17s form the template for the schor at the tip of the blade. The flipper indicates a wheel of the retractable landing gear. For the front carbon fiber shell, the material Toxic Storm from the manufacturer Fatcarbon Materials was chosen in the colors green, black and yellow. The color scheme is based on the characteristic camouflage paint of the Bf 109 with greenish-gray undercoat and yellow front fuselage. The opposite side has a titanium framelock with an elaborately integrated carbide contact surface. A beautifully designed and elaborately integrated clip allows the Boker Plus ME 109 to be worn tip-up on the right. Supplied with a high-quality case for storage and a certificate of authenticity.

Intended use: Sports / collection

Type of production: Industrial
Country of production: Taiwan
Blade: Damascus steel
Blade finish: -
Handle: in carbon fiber and titanium
Blade length: 80mm.
Blade thickness: 3.6 mm.
Total length: 180mm.
Weight: 66 g.
Clip: in stainless steel, removable
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zip case, guarantee certificate
Notes: pinball opening on bearings

Intended use: sports / collection

Type of production: Industrial
Country of production: Italy
Blade: Elmax 59 / 60HRC stainless steel
Blade finish: PVD
Handle: HDL carbon fiber
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Sleeve thickness: 18mm
Weight: 135g.
Closing mechanism: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes

Intended use: Mushroom knife

Blade: 12C27 stainless steel
Handle: Eucalyptus wood
Blade length: 65mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 175mm.
Balancing: -
Weight: 98g.
Closure: Liner Lock
Clip: in stainless steel
Sheath: -
Notes: Resealable Nylon Brush - Design by Riccardo Gobbato

Intended use: sharpener/sportsman

Type of production: Industrial
Country of Production: Italy
Blades: Stainless steel 420
Blade treatment: Nanoceramic HNCF
Handle: Carbon Fiber "FatCarbon"
Blade Length: 65mm.
Blade thickness: 2.2mm.
Length closed: 90mm.
Total length: 200mm.
Thickness when closed: 8mm.
Weight: 32g.
Closure: Slip Join
Clip: absent
Sheath: leather pouch
Packaging: cardboard box with Maserin logos
Notes: -

Intended use: sharpener/sportsman

Type of production: Industrial
Country of Production: Italy
Blades: Stainless steel 420
Blade treatment: Nanoceramic HNCF
Handle: Carbon Fiber "FatCarbon"
Blade Length: 65mm.
Blade thickness: 2.2mm.
Length closed: 90mm.
Total length: 200mm.
Thickness when closed: 8mm.
Weight: 32g.
Closure: Slip Join
Clip: absent
Sheath: leather pouch
Packaging: cardboard box with Maserin logos
Notes: -

Picnic + accessories will soon become indispensable for your nomadic meals!

Created in collaboration with designer Franck Fontana, the kit consists of:

- a microfiber napkin case for storing and cleaning items
- two inserts, a fork and a spoon, which are fixed on the handle of a N ° 08 knife (not included in the package)

The inserts are made of stainless steel, to ensure comfort in the mouth, hygiene and sturdiness (compatible with No. 08 wooden handles with the double Virobloc safety device, on sale since 2000).

To attach the fork or spoon:

- with the knife blade in the closed position, open the ring nut
- fix the fork or spoon at the level of the ring in the small interstices
- close the ring

Compact and lightweight, this easily transportable kit is made in France and replaces disposable cutlery.

Tools to eat comfortably in the office or outdoors!
Designed in collaboration with designer Franck Fontana, the Picnic + set brings together smart and durable accessories for nomadic and comfortable meals.

It is equipped with:
- a N ° 08 knife
- two inserts, a fork and a spoon, which are fixed to the handle of the N ° 08
- a microfiber napkin case for storing and cleaning items

The inserts are made of stainless steel, to ensure comfort in the mouth, hygiene and sturdiness (compatible with No. 08 wooden handles with the double Virobloc safety device, on sale since 2000).

The fork and spoon are compatible with traditional N ° 08 knives with wooden handle and double safety ring marketed since 2000.

The collaboration with Attilio Morotti returns for the creation of this elegant knife of small size but with high strength thanks to the use of top-quality Swedish steel and expert craftsmanship finish. Useful on any occasion and convenient to carry at all times thanks to its magnetic leather sheath made in Italy.



Intended Use: Hunting/Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in Sandvik 14C28N stainless steel
Blade treatment: Satin finish, with rounded edges
Handle: Stabilized maple burl
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 151mm.
Weight: 56g.
Scabbard: pocket, leather, with magnetic clasp (no belt loops/hooks)
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

The M3 is a small-sized fixed blade knife, useful in any field activity and easily transportable.

The M3 comes with a satin finish Niolox steel blade. The detachable grips are available in Micarta.

The M3 is equipped with a handle machined with 3D milling machines to achieve optimal ergonomics. Added to this is the surface texture that makes the grip firmer. The handle screws are in stainless steel with Torx T8 tightening system.

The M3 is sold together with the Cordura sheath for the version with Micarta handle.

Type of production: Industrial
Production Lama: Italy
Blade: SB1 Niolox 61HRC stainless steel
Blade treatment: Satin
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 250g.
Closure: -
Clip: -
Sheath: Cordura
Packaging: Cardboard box with Lion Steel logos
Note: -

The M3 is a small-sized fixed blade knife, useful in any field activity and easily transportable.

The M3 comes with a satin finish Niolox steel blade. The detachable grips are available in Micarta.

The M3 is equipped with a handle machined with 3D milling machines to achieve optimal ergonomics. Added to this is the surface texture that makes the grip firmer. The handle screws are in stainless steel with Torx T8 tightening system.

The M3 is sold together with the Cordura sheath for the version with Micarta handle.

Type of production: Industrial
Production Lama: Italy
Blade: SB1 Niolox 61HRC stainless steel
Blade treatment: Satin
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 250g.
Closure: -
Clip: -
Sheath: Cordura
Packaging: Cardboard box with Lion Steel logos
Note: -

The collaboration with Attilio Morotti returns for the realization of this elegant knife of small size but with high strength thanks to the use of Swedish steel of excellent quality and skillful craftsmanship finish. Useful on any occasion and convenient to carry at all times thanks to its magnetic leather sheath made in Italy.


Intended Use: Hunting/Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in Sandvik 14C28N stainless steel
Blade treatment: Satin finish, with rounded edges
Handle: Stabilized maple burl
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 151mm.
Weight: 56g.
Scabbard: pocket, leather, with magnetic clasp (no belt loops/hooks)
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Intended Use: Sporting

Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: G10 grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Tommaso Rumici

Intended Use: Sporting

Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Tommaso Rumici

Intended Use: Sporting/Tactical

Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: Black Tuff-Ex coating
Handle: GFN (Glass Filled Nylon)
Blade length: 102mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 229mm.
Weight: 101g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: removable, made of GFN (Glass Filled Nylon)
Packaging: cardboard box with Cold Steel logos
Notes: Carson Flipper opening system

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: SK-5 carbon steel
Blade finish: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 241mm.
Balance: backward
Weight: 142g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: SK-5 carbon steel
Blade finish: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 241mm.
Balance: backward
Weight: 142g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

Intended Use: Gentleman / EDC / Sporty

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Satin
Handle: G10
Blade length: 66mm.
Blade thickness: 2.7mm.
Length when closed: 92mm.
Total length: 158mm.
Weight: 49g.
Clip: -
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Notes: Design by Alexander Krava

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stonewashed stainless steel
Blade Length: 90mm.
Blade thickness: 3.3mm.
Length when closed: 121mm.
Total length: 211mm.
Weight: 167g.
Clip: stainless steel, removable
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Serge Panchenko

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin
Handle: G10
Blade length: 78.6mm.
Blade thickness: 4mm.
Length when closed: 108mm.
Total length: 188mm.
Weight: 135g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Jesper Voxnaes

Taggedout, knife inspired by the Bugout line, light, perfect for hunters who travel long distances or outdoor enthusiasts. When you go far with a kit on your back, every gram of weight carried counts. This light and thin hunting folder can handle any activity while you are in the wild, from preparing food to the field to skinning to paracord cutting. Lightweight, highly visible, slim in your pocket and with a razor sharp cut thanks to CPM-154 steel.

Intended use: Sports / EDC

Type of production: Industrial
Country of production: USA
Blade: CPM-154 (58-61 HRC)
Blade finish: Satin finish
Handle: Grivory
Blade length: 99mm.
Blade thickness: 2.3mm.
Closed length: 116mm.
Total length: 206mm.
Thick when closed: 12.5mm
Weight: 59.5g.
Closure: Axis Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Note: -

15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.

ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!


Intended Use: Collection / Hunting

Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey Underwood

15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.

ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!


Intended Use: Collection / Hunting

Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey Underwood

15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.

ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!


Intended Use: Collection / Hunting

Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey Underwood

15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.

ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!


Intended Use: Collection / Hunting

Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey Underwood

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Black G10 with removable orange paracord
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 239g.
Sheath: in Kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Lock to light the fire included, to be inserted in the scabbard - Design by Alfredo Doricchi

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: good condition
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on blade: signs of wear on blade.
* Marks on handle: none
* Box: lacking original packaging, sold with scabbard only
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory Coltelleria Collini

Intended Use: Tactical / Hiking

Type of production: industrial
Blade: stainless steel N690Co 58/60HRC
Country of production: Italy
Handle: forprene, removable
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 357mm.
Balance: forward, 45mm from the lower guard branch
Weight: 380g.
Sheath: made of 1000D OD Green cordura, MOLLE compatible
Notes: Foxionic surface treatment at 72/75HRC

Intended use: Sporty

Type of production: Industrial by Mercury
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: Naked
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 48g.
Sheath: Black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Jesper Voxnaes

Intended use: Neck Knife / Sporty

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: G10
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 77g.
Scabbard: Black leather sheath, for neck, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Jesper Voxnaes

Designed as an everyday companion for heavy-duty use, Engage is an easy-to-carry knife with a wide 3.5-inch S35VN stainless steel blade for superior strength and edge retention. Featuring Cold Steel's Atlas™ lock that provides a consistent, durable and reliable lock; fully ambidextrous and able to handle any task. The easy-to-grip G-10 handle is built to be durable, and the satin-finished clip blade allows for precise and effective cutting.


Intended Use: Sporting/Utility

Production type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S35VN
Blade Finish: Satin finish
Handle: G-10
Blade length: 89mm.
Blade thickness: 3.8mm.
Total length: 221mm.
Weight: 187g.
Closure: Atlas Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -

FLAME LIGHT, practical folding knife and now even lighter!

BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.

Intended Use: Sporting


Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael Zieba

Intended use: Sports

Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: Natural Micarta
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 67g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper Voxnaes

Intended use: Sports

Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: G10
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper Voxnaes

Intended Use: Sporting/EDC

Production type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Satin finish
Handle: Green Cavnas Micarta
Blade Length: 71mm. / 50mm.
Blade thickness: 2.3mm.
Length closed: 97.8mm.
Total length: 179mm. / 169mm.
Thickness when closed: 10mm.
Weight: 65g.
Closure: Slipjoint
Clip: -
Packaging: Cardboard box with Benchmade logos
Notes: Double blade and bottle opener / capsule lever tool 

Intended Use: Sporting/EDC

Production type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Satin finish
Handle: Green Cavnas Micarta
Blade length: 71mm. / 50mm.
Blade thickness: 2.3mm.
Length closed: 97.8mm.
Total length: 179mm. / 169mm.
Thickness when closed: 10mm.
Weight: 65g.
Closure: Slipjoint
Clip: -
Packaging: Cardboard box with Benchmade logos
Notes: Double blade and bottle opener / capsule lever tool 

When your field adventures transition to the kitchen, the right cutting tool can make all the difference!

The new Meatcrafter™️ is a hybrid fixed hunting blade with a blade design ideal for cutting, boning or slicing your favorite cuts of meat. Featuring Benchmade's new SelectEdge™ technology, the 28° sharpening angle of the CPM-S45VN stainless steel blade provides the perfect balance of penetration, strength, edge retention and blade flexibility. Ideal to take with you on your hunting trips, but also a reliable companion in the kitchen or during the most demanding barbecues!

Intended Use: Hunting / Fishing / Sporting / Meat Knife

Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S45VN 60/62HRC
Blade Finish: Satin
Handle: OD Green G10
Blade length: 154mm.
Blade thickness: 2.3mm.
Total length: 281mm.
Weight: 128g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -

Intended Use: Utility / Hiking / Tactical

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-D2 steel 60/62HRC
Blade Finish: Cobalt Black
Handle: Grivory
Blade Length: 90mm.
Blade thickness: 3.2mm.
Length closed: 120mm.
Total length: 211mm.
Handle thickness: 16mm.
Weight: 105g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, stainless steel
Packaging: cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: high-carbon steel blade, not stainless; wash and dry carefully after use and grease in case of storage

Intended Use: Sporting / EDC

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V 59/61HRC
Blade finish: Satin finish
Handle: Carbon fiber with anodized aluminum spacer
Blade length: 71mm.
Blade thickness: 2.3mm.
Length closed: 94mm.
Total length: 164mm.
Thickness when closed: 10.2mm.
Weight: 46g.
Closure: AxisLock
Clip: Removable and reversible, PVD stainless steel, Deep Carry type
Packaging: Cardboard box with Benchmade logos
Notes: -