Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fallkniven - F1 Wolf - VG-10W Laminated and Leather Sheath - knife
New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.
Intended use: tactical/military/huntingBlade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995.F-F1LW -
BlackFox - Golem by Denis Simonutti - BF-757OD - knife
Intended Use: Bushcraft / Outdoor
Production type: Industrial
Country of Production: China
Blade: Full tang in D2 59/61HRC steel
Blade Finish: Stonewashed
Handle: G10
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 270mm.
Weight: 290g.
Sheath: kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Design by Denis SimonuttiBF-757OD -
BlackFox - Lynx by Denis Simonutti - BF-756OD - knife
Intended Use: Bushcraft / Outdoor
Production type: Industrial
Country of Production: China
Blade: Full tang in D2 59/61HRC steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 110mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 180g.
Sheath: kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Design by Denis SimonuttiBF-756OD -
BlackFox - Nu-Bowie by Kean Alfaro - Green Micarta - BF-758MI - folding knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: micarta
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Clip: stainless steel, removable and reversible, deep pocket type
Closure: Button Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758MI -
BlackFox - Nu-Bowie by Kean Alfaro - Black G10 - BF-758 - folding knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade finish: black coating
Handle: G10
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Locking system: Button Lock
Clip: stainless steel, removable and reversible, deep pocket type
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758 -
Viper - Orso 2 by Jens Anso - Dark Stonewashed Titanium - V5997TI - Knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Italy
Blade: Sintered stainless steel Lohmann LO-QPM20-4
Blade finish: Dark Stonewashed
Handle: GR5 Dark Stonewashed Titanium with anodized titanium spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 208mm.
Thickness when closed: 12mm.
Weight: 137g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jens AnsoV5997TI -
Viper - Hug by Sacha Thiel - M390 Bronze Stars - V5990DBRS - knife
Intended Use: Sporting/EDC
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: bronze, dark stonewashed, CNC machined, with Stars design
Blade length: 71mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 184mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Slipjoint
Sheath: leather
Packaging: cardboard box with Viper Knives logos
Notes: Design by Sacha ThielV5990DBRS -
Le Petit Jouteur - Oyster Opener Knife Set and Leather Hand Guard
Handcrafted box containing a "Le petit jouteur" oyster knife and a leather hand guard.
Leaning the handle of your "Le Petit Jouteur" oyster knife against your ear, you may not hear the lapping of the waves ...
Oyster knife with mussel shell handle
Handcrafted made in France."Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.
High quality, very hard and ultra-strong thanks to a heat treatment process by cryogenization.
An ambidextrous, ergonomically shaped knife with a stainless steel blade that allows you to open shellfish quickly and safely.
A minimum of care and maintenance , will allow you to keep it in a state that will delight you for many years.
Included in the package is an ambidextrous hand guard made of handcrafted leather.
Weight 120 g
Dimensions 12 × 3.5 × 1.5 cm.
8169CON€65.57Only 1 left -
Mcusta - Bamboo knife brown pakka wood - SPG2 Powder Steel - MC-0145G - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SPG2 61 / 62HRC
Blade treatment: -
Production Lama: Japan
Handle: Damascus steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -MC-0145G -
Lionsteel - T5 Satin - Green Canvas Micarta - T5CVG - knife
Recommended Use: hiking / sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: full tang, stainless steel Niolox
Blade finish: Satin
Handle: Micarta
Blade length: 128mm.
Blade thickness: 5mm.
Total length: 252mm.
Weight: 274g.
Sheath: leather
Packaging: cardboard box with Lion Steel logos
Notes: -LS-T5CVG -
Boker Plus - Aluma Flipper Folder by E. Manasherov - 01BO463 - knife
Intended Use: Sporting/collection
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade finish: stonewashed
Handle: aluminum with wood insert
Blade length: 91mm.
Blade thickness: 3.6mm.
Total length: 220mm.
Weight: 123g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered pouch, warranty certificate
Notes: Design by Eran ManasherovBO-01BO463 -
Fox - Saturn by D. Simonutti - Acid Stonewashed Aluminum - FX-551ALG - knife
Intended Use: Sporting / Collection
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Acid Stonewashed
Handle: Anodized Aluminum
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Aluminum machined from billet
Packaging: box with Fox Knives logos, zippered nylon pouch, PVC patch with velcro, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551ALG -
Fox - Saturn by D. Simonutti - Black Aluminum - FX-551ALB - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade treatment: Idroglider Blackwashed
Handle: Anodized aluminum
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Aluminum machined from billet
Packaging: box with Fox Knives logos, zippered nylon pouch, PVC patch with velcro, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551ALB -
Fox - Saturn by D. Simonutti - Satin Titanium - FX-551Ti - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 58/60HRC
Blade treatment: Satin finish
Handle: Titanium with PVD Blacwashed treatment
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives logos, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551Ti -
Cold Steel - Razor Tek 6.5" - Black GFN - FX-65RZR - Knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: full tang, stainless steel 1.4116
Blade finish: satin finish
Handle: GFN
Blade length: 165mm.
Blade thickness: 5mm.
Total length: 298mm.
Weight: 330g.
Sheath: Secure-Ex® thermoplastic material
Packaging: cardboard box with Cold Steel logos
Notes: -CSFX-65RZR -
ExtremaRatio - K-Talon Karambit - N690 Dark Stone Washed - Knife
The K-Talon is a karambit with a particularly thin full tang structure that, including sheath and grips, reaches a thickness of only 10 mm. The curved, hooked blade is designed inspired by the shape of a claw. It is designed to achieve precise, deep cuts while simultaneously hooking, trapping and/or ripping.
The back ring is designed to achieve a strong and secure grip in all conditions preventing the knife from sliding back and making it exceptionally difficult to disarm or turn against the user.
The very thin Kydex sheath has a quick release and comes with paracord that allows it to be used as a neck knife or attached to MOLLE-system platforms.
Intended use: tactical
Type of production: industrial
Country of production: Italy
Blade: full tang, stainless steel N690Co 58/60HRC
Blade finish: Dark Stone Washed
Handle: anodized anticorodal aluminum
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 175mm.
Weight: 130g.
Sheath: Kydex
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with multi-position, M.O.L.L.E.-compatible attachment systems.ER-KTAL-DS -
Pohl Force - Charlie Three SW - D2 steel - 6011 - knife
With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Three covers a wide range of applications.
The modern Spear Point blade and handle of the Charlie Three are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.
Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip.
The Charlie Three BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.
Intended Use: Tactical/SportingBlade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signedPF-6011 -
Boker Plus - Urban Trapper Premium G-10 Jade by Brad Zinker - 01BO614 - folding knife
Intended Use: Sporting / Collection
Production Type: Industrial
Country of manufacture: Taiwan
Blade: M390 stainless steel
Blade treatment: Black PVD
Handle: titanium and G-10 jade
Blade length: 90mm.
Blade thickness: 2.6mm.
Total length: 196mm.
Weight: 100g.
Clip: titanium, machined from billet
Locking mechanism: Framelock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker - Ball bearing opening systemBO-01BO614 -
Boker Plus - Urban Trapper Premium Carbon Fiber by Brad Zinker - 01BO613 - folding knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel M390
Blade treatment: stonewashed
Handle: titanium and carbon fiber
Blade length: 90mm.
Blade thickness: 2.6mm.
Total length: 196mm.
Weight: 100g.
Clip: titanium, machined from billet
Closure: Framelock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker - Ball bearing opening systemBO-01BO613 -
Lionsteel - L.E.One Flipper Karambit by Emerson - Green and Chemical Black - LE1 A GB - knife
lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.
The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.
Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:
* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.
* Wave: Ernest Emerson's patented system that allows the blade to hook into the pocket of the pants, on extraction, allowing it to open automatically with the right motion.
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Chemical Black
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst EmersonLS-LE1AGB -
Lionsteel - L.E.One Flipper Karambit by Emerson - Brown and Stonewashed - LE1 A ES - knife
lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.
The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.
Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:
* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.
* Wave: Ernest Emerson's patented system that allows the blade to hook into the pocket of the pants, on extraction, allowing it to open automatically with the right motion.
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Stonewashed
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst EmersonLS-LE1AES -
Opinel - No. 08 Tour de France 2022 Black and Yellow - Beech Wood - Knife
The Arc de Triomphe, Mont Ventoux, the best climber motif, rain, fog: the knife's beechwood handle is decorated with pad printing in yellow and black. This graphic collaboration with Manovelle (Matthieu Lifschitz) pays homage to the iconic Tour de France motifs!
The blade is made of Sandvik 12C27M stainless steel and measures 8.5 cm. The double safety ring allows the blade to be locked in the open and closed position. The yellow leather strap at the end of the handle is a nod to the symbolic color of the Tour de France. Delivered in kraft carton with Tour de France sticker.
Type of production: industrial
Country of production: France
Blade: stainless steel Sandvik 12C27
Handle: made of Beech wood with black and yellow pad printing
Blade length: 80mm.
Blade thickness: 1.6mm.
Length closed: 110mm.
Thickness closed: 20mm.
Total length: 195mm.
Weight: 60g.
Locking system: Virobloc both when open and closed
Notes: special limited edition to celebrate the Tour de France 2022op-8tdf22 -
MC Thiers - AX1 Vintage Knife - Green Stamina Wood - PRIVATE COLLECTION - knife
Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.
Intended Use: Collection/SportsmanType of manufacture: Industrial
Country of Production: France
Blade: Stainless steel Z70CD15 (440A)
Blade finish: satin-finished
Handle: stainless steel and dark green stamina wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 175mm.
Weight: 95g.
Closure: Back Lock
Clip: not present
Sheath: leather, with belt loop
Notes: knife from private collection in excellent conditionMCT-AX1-GSW -
Cold Steel - Air Lite Tanto - CS26WT - Black G10 - folding knife
We know that many of our customers are increasingly concerned about the weight and bulk of their EDC (every day carry) knife as space in their pockets is always very limited. That's why we focused on making a feather-light (90g.) and ultra-thin (8.8 mm thick) knife that can be carried 24/7 while still leaving pocket space for other essential accessories.
What we did not do, however, in our attempt to create a super EDC knife was to skimp on workmanship and materials. That's why all the blades in the Air Lite series feature impeccable workmanship and Japanese AUS-10A stainless steel, famous for its ability to hold an edge; the handles, on the other hand, are laser-cut from genuine G-10.
Even the locking mechanism is unbeatable-there's nothing better than our celebrated Tri-Ad Lock when it comes to finger protection. With an affordable price, amazing sharpness, and tremendous comfort and convenience in use, the Air Lite is truly unbeatable!
Intended Use: Sporty / EDCProduction type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade treatment: Satin finish
Handle: G10
Blade length: 89mm.
Blade thickness: 3mm.
Total length: 203mm.
Weight: 90g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -CS26WT -
Tops - CUMA Tak-Ri 3.5 - Tactical Kukri - Green Canvas Micarta - Knife
The CUMA Tak-Ri 3.5 is not your typical kukri. In fact, you have to understand what a Gurkha Kukri is to see the curve of its blade. The kukri (Devnagari/ खुकुरी), originally spelled khukri or khukuri, is a Nepalese curved knife. It is a traditional weapon of the Nepali people and also a weapon of choice/side arm for all Nepalis, including those serving in various armies around the world, but with the CUMA Tak-Ri we have gone further!
Once you have the CUMA Tak-Ri in your hands, you will quickly realize that it is "tough to the core." In fact, the Tak-Ri caused such a stir at the 2011 SHOT Show that Lou Ferrigno (the historic "Incredible Hulk") pre-ordered his directly at the TOPS Knives booth.
Intended Use: Hard Utility / Tactical
Type of Production: Semi-Industrial
Country of Manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Coyote Tan Coatung
Handle: Canvas Micarta
Blade Length: 178mm.
Blade thickness: 4.9mm.
Total length: 343mm.
Weight: 460g.
Scabbard: Nylon, belt-mounted, M.O.L.L.E. compatible.
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by certificate of guarantee and authenticityTPCUMATK35 -
ESEE Knives - Model 4HM Modified Handle - Leather Sheath - Knife
Intended Use: Bushcraft / Utility
Production Type: Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Black Traction Coating
Handle: Micarta
Blade Length: 115mm.
Blade thickness: 4.8mm.
Total length: 225mm.
Weight: 219g.
Sheath: leather, belt, for vertical carry; Made in the USA
Packaging: cardboard box with ESEE logos.
Notes: modified handle version of Model 4, more suitable for precision work and bushcraft usesESEE-4HM -
Acta Non Verba - Z100 Flipper - Stonewashed Sleipner - Coyote G-10 - knife
Timeless simplicity is the main reason why you will never get tired of your Z100.
In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.
Intended Use: EDC / SportingProduction type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush in stainless steel
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.ANV-Z100-012 -
Benchmade - Meatcrafter - Orange Blade and Carbon Fiber - 15500OR-2 - knife
When your adventures in the field transition to the kitchen, the right cutting tool can make all the difference!
The new Meatcrafter™️️ is a hybrid hunting fixed blade with a blade design ideal for cutting, boning or slicing your favorite cuts of meat. Featuring Benchmade's new SelectEdge™ technology, the 28° sharpening angle of the CPM-S45VN stainless steel blade provides the perfect balance of penetration, strength, edge retention and blade flexibility. Ideal to take with you on your hunting trips, but also a reliable companion in the kitchen or during the most challenging barbecues!
Intended Use: Hunting / Fishing / Sporting / Meat KnifeProduction type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S45VN 60/62HRC
Blade Finish: High Visibility Orange
Handle: Carbon Fiber
Blade Length: 154mm.
Blade thickness: 2.3mm.
Total length: 281mm.
Weight: 50.2g.
Scabbard: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15500OR-2 -
ExtremaRatio - Sethlans Expeditions - Survival Knife - knife
Sethlans Expeditions, as well as the Sethlans model from which it derives, is a fixed blade work knife designed to deal with a wide range of situations, but also as a backup blade. The Sethlans Expeditions has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.
Sethlans Expeditions has a Böhler N690 steel blade heat treated to 58 HRC with MIL-C-13924 burnishing and stone washed surface treatment (Dark Stone finish). The knife comes with desert colored G10 grips that feature the ergonomic design characteristic of Extrema Ratio handles. They can be removed to free the skeleton structure of the knife, allowing maximum lightness with minimum thickness.
For lovers of extreme customization, the full-tang structure allows the handle to be covered with paracord. The sheath is composed of a very light and minimalist Kydex part. It can be disassembled and can be adapted to both left- and right-handed people. The addition of an optional belt clip allows both vertical and horizontal positioning of the knife and makes the sheath much more versatile than the textile version. It is equipped with a mini pouch with M.O.L.L.E. system containing paracord with flammable filament to be used in case of emergency and/or critical weather conditions and a Firesteel for lighting fires.
Intended use: Survival / Bushcraft / UtilityProduction type: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924 with Dark Stone finish
Handle: G-10
Blade length: 107mm.
Blade thickness: 6.3mm.
Total length: 224mm.
Weight: 207g.
Sheath: Kydex and cordura, M.O.L.L.E. compatible.
Package: Cardboard box with Extrema Ratio logos.
Notes: Designed and developed thanks to the collaboration with the instructor Daniele del Canto of F.I.S.S.S. (Federazione Italiana Survival Spotivo e Sperimentale).ER-SET-EX -
ExtremaRatio - Kreios Expeditions - Heavy Utility Machete - Knife
Kreios Expeditions, as well as the Kreios model from which it derives, has been designed and developed thanks to the collaboration with the Master instructor F.I.S.S. (Federazione Italiana Survival Sportivo e Sperimentale) Daniele Dal Canto. It is defined by its creator as a sort of "off the road" of cutting tools, therefore not a specific disposable tool, but a multi-tasking tool, extremely versatile and designed to cope with many uses.
Thanks to its ergonomics, weight and size, Kreios Expeditions is suitable to open gaps in the thick vegetation, especially where it is necessary to take distance, for safety reasons, from thorny or harmful essences. Thanks to its robustness, it is an effective machete even in the heaviest field work. Combining the 32 cm of the "full flat" cutting edge, the 11° forward inclination of the blade and the 630 gr. of its weight, you get a tool with extraordinary cutting capabilities that does not fear bending.
Kreios Expeditions brings modern geometry and materials combined with the lines and effectiveness of blades typical of the Malaysian and African tradition, creating an ideal tool for field work but also, if necessary, for defense/offense. Kreios Expeditions is equipped with a desert color forprene handle and a BÖHLER N690 (58HRC) steel blade with MIL-C-13924 burnishing and stone washed surface finish (Dark Stone finish). It is supplied with a desert Cordura sheath with MOLLE system and strap for safety carry, equipped with a mini pouch containing paracord with flammable filament to be used in case of emergency and/or critical weather conditions and a Firesteel for lighting fires.
Intended Use: Chopper / Machete / Heavy Utility
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade Finish: Burnishing MIL-C-13924 with Dark Stone finish
Handle: Forprene
Blade Length: 324mm.
Blade thickness: 6.3mm.
Total length: 476mm.
Weight: 642g.
Sheath: Cordura, M.O.L.L.E. compatible.
Package: Cardboard box with Extrema Ratio logos.
Notes: Designed and developed thanks to the collaboration with the instructor Daniele del Canto of F.I.S.S.S. (Federazione Italiana Survival Spotivo e Sperimentale).ER-KRE-EX -
Acta Non Verba - P200 - Stonewashed N690Co - Orange G10 and Leather - knife
Anyone who knows how to take care of themselves outdoors will appreciate the reliability of the P200, which finds its greatest strength in its simplicity and no-frills design.
A high blade bevel combined with a low steel thickness is a must for any great cutting tool. Choosing to use a strong, stainless steel like Bohler N690Co will not affect the P200 even in challenging weather and usage conditions, even for long periods away from home. The low weight, flat G10 handle and compact size of the P200 ensure that your partner will never let you down in terms of weight and bulk either, because we know how important every single gram is when hiking.
Intended use: hiking / utilityType of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel N690Co 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total lenght: 220mm.
Weight: 150g.
Scabbard: Black leather, sewn and handmade.
Package: Cardboard box with ANV logos
Notes: -ANV-P200-011 -
Acta Non Verba - P200 - Stonewashed N690Co - Black G10 and Kydex - knife
Anyone who knows how to take care of themselves outdoors will appreciate the reliability of the P200, which finds its greatest strength in its simplicity and no-frills design.
A high blade bevel combined with a low steel thickness is a must for any great cutting tool. Choosing to use a strong, stainless steel like Bohler N690Co will not affect the P200 even in challenging weather and usage conditions, even for long periods away from home. The low weight, flat G10 handle and compact size of the P200 ensure that your partner will never let you down in terms of weight and bulk either, because we know how important every single gram is when hiking.
Intended use: hiking / utilityType of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel N690Co 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total lenght: 220mm.
Weight: 150g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos
Notes: -ANV-P200-006 -
Ontario Knife Company - Spec Plus SP-2 Survival Knife - 8680 - knife
Intended Use: Survival / Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder coating
Handle: kraton
Blade length: 140mm.
Blade thickness: 4.5mm.
Total length: 269mm.
Balancing: advanced
Weight: 255g.
Scabbard: Belt, nylon, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -ON8680 -
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmax -
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmax -
Boker Plus - Vox G10 field knife - 01BO375 - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: black
Handle: G10
Blade length: 86mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 201mm.
Weight: 145 g.
Clip: in stainless steel, with gold anodizing
Closure: lining lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Note: design by Jesper VoxnaesBO-01BO375 -
Boker Plus - SubCom 2.0 folder knife - D2 - 01BO525 - knife
Today, Chad Los Banos' practical Boker Plus Subcom can definitely be called one of the cornerstones of Boker Plus. The continued popularity of this versatile pocket knife has prompted Boker to put this ultra-compact classic back into production in a modernized version. The Boker Plus Subcom 2.0 comes with a short D2 steel blade with a discreet pearl finish. It opens with the help of the thumb pin on both sides and is securely locked in place by the framelock's 2mm thick steel plate. The textured black Zytel handle is supplied with three-dimensional milling.
Intended use: Sports
Blade: D2 steel 59-60 hours
Handle: stainless steel and Zytel
Blade length: 58mm.
Blade thickness: 2mm.
Closed length: 68mm.
Total height of the lung: 117 mm.
Balance: -
Pesos: 69 g.
Closure: frame lock
Clip: removable and reversible in stainless steel
Sheath: -
Grade: -BO-01BO525 -
BlackFox - Lollypop Fixed by Tommaso Rumici - BF-755 - coltello
Destinazione d'uso: Outdoor / Utility / EDC
Tipo di produzione: Industriale
Paese di produzione: China
Lama: Acciaio Inox 440C
Trattamento lama: Blackwashed
Manicatura: G-10
Lunghezza lama: 55mm.
Spessore lama: 3.5mm.
Lunghezza totale: 115mm.
Peso: 71g.
Fodero: in Kydex, con clip in acciaio inox
Confezione: scatola in cartone con loghi BlackFox
Note: Design by Tommaso RumiciBF-755 -
BlackFox - Plan B Rescue Tool by Tommaso Rumici - BF-754 - knife
Intended Use: Rescue Tool / Utility
Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 45mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 80g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso RumiciBF-754 -
BlackFox - Arrow Fixed by Tommaso Rumici - BF-753 - knife
Intended Use: EDC / Utility / Tactical/
Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 71g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso RumiciBF-753 -
Lionsteel - Myto Damascus knife - Titanium Blue - MT01DBL - knife
Myto is the new hi-tech EDC folding knife that fits perfectly in your pocket and can be used for all daily activities. Its geometry and Molletta's elegant and minimal design marry perfectly with his strength:
has a M390 sintered steel blade with satin finish equipped with "" ReF "" (Removable Flipper system) and a Double Crown ball bearing system for a more stable blade and a smoother movement
has a SOLID® titanium clip screwed to the frame by a tungsten carbide glass breaker.
the locking bar is reinforced with a hardened steel insert to avoid wear due to blade rotation.Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: Chad Nichols Stainless Damascus
Blade treatment:
Handle: titanium
Blade length: 83mm.
Blade thickness: 4mm.
Total length: 201mm.
Thick when closed: -mm.
Weight: 118g.
Closure: Frame Lock
Clip: titanium
Packaging: Elegant fully recyclable cardboard box
Notes: Carson Flipper opening system on ball bearingsLS-MT01DBL -
Lionsteel - THRILL Damascus knife - SlipJoint Titanium Gray - TL D GY - knife
Thrill Aluminum is the SlipJoint knife with clip that can be inserted inside the handle in case of need thanks to the lionSTEEL HWAY.L - Hide What Annoys You system.
Designed by Molletta, it is equipped with a “no locks” mechanism and has a SOLID® Knife handle, made from a single block of aluminum. The handle, light and easy to grip, is available in black, red, green and orange.
The blade is in Scrambled damask (Chad Nichols).
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Italy
Blade: Chad Nichols Stainless Damascus
Blade treatment: Satin
Handle: Titanium machined from solid
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 18mm.
Weight: 88g.
Closure: SlipJoint with steel flap
Clip: retractable, machined from solid
Packaging: cardboard box with LionSteel logos
Note: -LS-TLDGY -
Benchmade - Anonimus - CPM-CruWear - 539GY - knife
Take the new Anonimus into the woods by keeping it by your side and you'll be ready to take on any adventure!
This fixed blade survival knife is ideal for bushcrafting thanks to the CPM-CruWear steel blade that offers excellent cutting and edge-holding capabilities combined with a deliberately low-profile aesthetic thanks to the matte finish of the Cerakote blade and a black Boltaron sheath with additional loop for a fire stick.
Intended Use: Bushcraft / Hiking / UtilityProduction Type: Industrial
Country of Production: USA
Blade: Full tang tool steel CPM-CRUWEAR 63/65HRC
Blade Treatment: Tungsten Grey Cerakote
Handle: G10
Blade length: 127mm.
Blade thickness: 2.9mm.
Total length: 249mm.
Weight: 168g.
Sheath: made of Boltaron, injection molded polymer, with additional loop to accommodate a fire stick.
Packaging: cardboard box with Benchmade logos
Notes: -BM-539GY -
ExtremaRatio - Satre - N690 Black - Neck Knife - Knife
Satre is a small, light and extremely resistant fixed blade knife. Given its characteristics, it is used in a wide range of disciplines and uses ranging from survival activity, bushcraft or as an element of an EDC (Every Day Carry) kit.
It was designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S.S. (Italian Federation of Sports and Experimental Survival).
In Neck Knife mode, through the use of a paracord 550 cord, it is possible to keep it around the neck by keeping the knife vertically with the handle facing downwards. The metal eyelets on the sheath made of pre-shaped Kydex allow the application of both the lanyard and the accessory holder.
The full-tang skeletonized structure allows you to customize the knife using paracord as a coating for the handle
This Black version uses the Böhler N690 heat treated at 58 HRC. This material is chosen for its resistance to oxidation, the durability of the wire and above all the reliability it has shown over the years.
Intended use: Neck / Hiking / Utility Knife
Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black
Handle: stainless steel N690Co 58 / 60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78 g.
Sheath: in Kydex, for neck
Packaging: Cardboard box with Extrema Ratio logos
Note: possibility to use the sheath with Ulti-Clip systems, M.O.L.L.E. o Tek-Lok (available separately)ER-SAT-BL -
Pohl Force - Compact Two BK TiNi - D2 steel - 6032 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The surface of the blade has a tactical, non-reflective TiNi titanium nitriding coating that provides excellent protection against external corrosives.
The reduced handle design is the basis for the knife's very compact size. The pleasantly rounded tang and cleverly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact TWO BK is equipped with a robust, high-quality Kydex sheath in black. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC with TiNi coating
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6032 -
Pohl Force - Compact Two SW - D2 steel - 6031 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.
The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact Two SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6031 -
Pohl Force - Compact One SW - D2 steel - 6021 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive, classic Bowie blade of the Compact One, which is 88 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.
The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact One SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 88mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6021 -
Antonini knives - Old Bear knife in SanMai VG10 a 67 layers - 23cm - multilayer black - Limited Edition
Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.
The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.
To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade
Type of production: semi-artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in plywood with satin brass ring with nickel plating
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 127mm.
Thick when closed: 22mm.
Total length: 225mm.
Weight: 68g.
Closure: viro blockThe handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid safety ring in nickel plated brass equipped with a special locking device (covered by patent n. active partner of this project) which can be activated both in the open and in the closed position.
As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.
The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.
Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: Collini Steel
AE-9305/23_MNK -
Antonini knives - Old Bear knife in SanMai VG10 at 67 layers - 21cm - olive tree - Limited Edition
Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.
The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.
To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade
Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: olive wood
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Thick when closed: 22mm.
Total length: 212mm.
Weight: 65g.
Closure: viro blockThe handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n. of this project) which can be activated both in the open position and in the closed position.
As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.
The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.
Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: Collini Steel
AE-9305/21_LU -
Antonini knives - Old Bear knife in SanMai VG10 at 67 layers - 19cm - walnut - Limited Edition
Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.
The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.
To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade
Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 46g.
Closure: viro blockThe handles are made of antique and oiled walnut wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.
As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.
The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.
Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: Collini Steel
AE-9305/19_LN -
MKM - Maximo Flipper Knife Design by Bob Terzuola - Black Micarta - MK-MM-BCT - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Sheath: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-BCT -
MKM - Maximo Flipper Design by Bob Terzuola - Green Micarta - MK-MM-GCT - folding knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Closure: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-GCT -
MKM - Maximo Flipper Knife Design by Bob Terzuola - Titanium - MK-MM-T - folding knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: Titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 134g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-T -
Maserin - Diceros by Davide Bomben - G10 Black - 925/G10N - knife
Intended Use: Utility / Hiking
Production type: Industrial
Country of Production: Italy
Blade: Full tang, tool steel D2
Blade Finish: Stonewashed
Handle: G-10
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 290mm.
Balance: slightly advanced
Weight: 412g.
Sheath: nylon, with thigh and belt attachments
Package: Cardboard box with Maserin logos - diamond sharpener - wire saw for wood
Note: Design by Davide Bomben, president of the Associazione Italiana Esperti d'Africa (Italian Association of African Experts) and chief instructor of the Poaching Prevention Academy, an organization that in Namibia and other African countries trains rangers against poachers. He is the director of training for the African Field Guides Association and for over ten years has worked with the tour operator Il Diamante and with Wilderness Safaris as a guide and ranger. He has published guides to Namibia, South Africa and Botswana and three books on African mammals and birds. He is the promoter and referent of numerous projects for the protection of African wildlife such as rhinos, lions, elephants and gorillas.MA-925/G10N -
Maserin - Diceros by Davide Bomben - G10 Orange - 925/G10A - knife
Intended Use: Utility / Hiking
Production type: Industrial
Country of Production: Italy
Blade: Full tang, tool steel D2
Blade Finish: Stonewashed
Handle: G-10
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 290mm.
Balance: slightly advanced
Weight: 412g.
Sheath: nylon, with thigh and belt attachments
Package: Cardboard box with Maserin logos - diamond sharpener - wire saw for wood
Note: Design by Davide Bomben, president of the Associazione Italiana Esperti d'Africa (Italian Association of African Experts) and chief instructor of the Poaching Prevention Academy, an organization that in Namibia and other African countries trains rangers against poachers. He is the director of training for the African Field Guides Association and for over ten years has worked with the tour operator Il Diamante and with Wilderness Safaris as a guide and ranger. He has published guides to Namibia, South Africa and Botswana and three books on African mammals and birds. He is the promoter and referent of numerous projects for the protection of African wildlife such as rhinos, lions, elephants and gorillas.MA-925/G10A -
Kershaw - Camp 10 Machete - 1077 - Black - outdoor knife
Camp 10 is the ideal tool for the outdoors and for survival. The solid edge blade is made of 65Mn carbon tool steel which is characterized by its wear resistance. A black powder coating protects the steel and facilitates maintenance. The rubber-coated handle is super-durable and provides an extra-secure contoured grip. The handle has built-in hand protection and is perforated in both the front and back so you can attach a carrying lanyard to it. It features a black sheath with comfortable nylon straps.
Intended use: hard utility
Type of production: China industrial
Blade: 65Mn carbon steel
Blade treatment: Teflon coating
Handle: rubber
Blade length: 254mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 406mm.
Balance: advanced to 7.5cm.
Weight: 521g.
Closure: -
Clip: -
Sheath: Nylon GFN
Note:KE1077 -
Fox - Terzuola - Liner Lock Micarta - FX-525MI - knife
Intended Use: Sporting
Production type: Industrial
Blade production: Italy
Blade: Becut stainless steel
Surface Treatment: Beadblasted
Handle: Green Micarta
Blade length: 8.9mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 200mm.
Thickness when closed: 14.5mm
Weight: 105g.
Closure: Liner Lock
Clip: Steel wireclip
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Bob TerzuolaFX-525MI -
Cold Steel - SR1 Clip Point knife - S35VN - 62L OD Green G10 - folding knife
The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.
It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!
The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel
A good blade needs a good grip, so this model of the SR1 is made from G10.
For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Satin
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62L -
Cold Steel - SR1 Tanto Point knife - S35VN - 62LA OD Green G10 - folding knife
The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.
It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!
The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel
A good blade needs a good grip, so this model of the SR1 is made from G10.
For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Wash
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62LA -
CRKT - Clever Girl Kukri Knife - 2710 - Machete
Intended Use: Hiking / Heavy Duty
Production Type: industrial
Blade: Full Tang in carbon steel SK-5 with Black Powder treatment
Country of Production: Taiwan
Handle: G-10
Blade Length: 196mm.
Blade thickness: 4.8mm.
Total length: 336mm.
Balance: Advanced
Weight: 402g.
Sheath: thermoplastic
Packaging: cardboard box with CRKT logos
Notes: Design by Austin McGlaunCR2710 -
Boker Plus - Papillon Trainer Bali - 01BO352 - training knife
Intended Use: Training
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 420
Blade Finish: Stonewashed
Handle: Stainless steel
Blade Length: 114mm.
Blade thickness: 3.7mm.
Length closed: 138mm.
Total length: 252mm.
Weight: 124g.
Closure: T-latch
Clip: -
Package: Cardboard box with Boker Plus logos
Notes: -BO-01BO352 -
ExtremaRatio - G.O.I. Caimano Nero N.A. Flipper - Knife
NON-automatic version of the Caimano Nero model
The Black Caiman is a tactical knife that Extrema Ratio, official supplier of Comsubin, has developed and delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy. Its name recalls and pays homage to the heroic Caimani Neri del Piave, a department of Arditi of the Regia Marina and other components on a voluntary basis, which during the First World War crossed the Piave River by swimming to carry out raids in enemy territory.
Spear Point" 4 mm blade with asymmetrical rounding and partial sharpening of the counterbore to increase the penetration coefficient. The toothing on the blade allows you to cut cables and fabrics with high resistance preserving the sharpness.
It is a medium folder with a robust structure. The thick aluminum cheeks, thanks to the many processes of removal make the knife light and balanced. The end of the handle, which recalls the shape of the Helix/Timon group of the slow running torpedo (S.L.C.), serves to improve the grip for the rapid extraction of the knife from the pocket.
The DLC-coated titanium clip can be positioned at three different angles on either side to allow for maximum customization of the carry. Its shape is designed to minimize the bulk of the handle outside the pocket.
Among its endowments, besides the carbide glass breaker, there is also a safety, that when inserted, preserves from a dangerous accidental closing of the blade.
Destination of use: Tactical/Military
Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade length: 93mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total lenght: 231mm.
Weight: 180g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Notes: Additional safety stop, when knife is openER-CAI-NA -
Boker Arbolito - Esculta Micarta - 02BA593M - Knife
Intended Use: Hunting / Utility
Production type: Industrial
Country of Production: Argentina
Blade: ful tang in stainless steel N695Co 58HRC
Blade finish: Satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.1mm.
Total length: 293mm.
Weight: 374g.
Scabbard: leather
Package: cardboard box with Boker logos
Notes: -BO-02BA593M -
Boker - Tiger Damascus knife - 111103DAM - folding knife
Boker Tiger-Damascus adds a very special model to the series of pocket knives steeped in history. Collector's knife with a historical past, a true piece of living history, which combines high quality craftsmanship with authentic materials. Known worldwide as the Tiger, the Panzerkampfwagen VI was used by the Wehrmacht from the late summer of 1942. It is considered to be one of the most famous tanks in history, despite its modest production number of only 1350 units and consequent low importance. strategic. The development of the heavy tank can be traced back to 1937 and series production began in August 1942. Today there are only seven units preserved, on display worldwide.
The tank parts used for the knife blade come from a Tiger I of the Schwere Panzerabteilung 502, which was destroyed in combat in Latvia in the summer of 1944 in a wooded area near the town of Bauska. Based on the wreck found at the original excavation site, it was determined that this Tiger was one of the first models produced.
The straight-cut Boker Tiger-Damascus features a unique Damascus blade made from the steel from the tank destroyed in Bauska. The non-stainless damask mosaic is hand-forged by Chad Nichols and resembles the tank tracks left in the ground by the Tiger's heavy tracks. Unlike conventional damask, damask mosaic production does not create layers, but complex damask bars are hand forged into a mosaic with an elaborate and very complicated process. The blade operates on ball bearings and is locked open by a sturdy steel framelock with stonewash finish.
The overall shape of the knife pays homage to the famous lines of the tank, while the decorative pin screw is modeled on the main drive pinion.
The slightly shaped micarta canvas handle scales feature precisely milled grooves, reminiscent of the characteristic surface texture of the Zimmerit coating of German armored vehicles.
Intended use: Collection
Type of production: Industrial
Country of production: Germany
Blade: Damascus steel from pieces of the Tiger
Handle: in steel and micarta
Blade length: 85mm.
Blade thickness: 3.6mm.
Total length: 198mm.
Weight: 141g.
Clip: in stainless steel
Closure: Frame Lock
Packaging: PVC display case that lets the knife "float" inside, making it visible from all sides
Notes: Certificate of Guarantee - Gray cotton caseBO-111103DAM -
Boker Plus - Zenshin knife - Higonokami - 01BO368 - knife
The elegant Boker Plus Zenshin is reminiscent of the famous Higonokami pocket knives, manufactured in the Japanese city of Miki since 1896. Unlike the original Japanese versions, the body of the knife handle is not made from a single piece of folded metal, but from flat plates in steel with a sturdy stonewash finish. The 440C slipjoint blade has an elaborate two-tone finish. In this version it is equipped with a frame lock. With lanyard hole.
Intended use: Sports
Type of production: Industrial
Country of production: Asia
Blade: 440C stainless steel
Blade treatment: Dual Tone
Handle: in steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 60g.
Clip: -
Closure: frame lock
Packaging: cardboard box with Boker Plus logos
Note: -BO-01BO368 -
Boker Plus - Zenshin 42 Brass knife - Higonokami - 01BO369 - knife
The elegant Boker Plus Zenshin is reminiscent of the famous Higonokami pocket knives, manufactured in the Japanese city of Miki since 1896. Unlike the original Japanese versions, the body of the knife handle is not made of a single piece of folded metal, but of flat plates made of brass with a sturdy stonewash finish. The 440C slipjoint blade has an elaborate two-tone finish. It opens with two hands and does not lock. With lanyard hole.
Intended use: Sports
Type of production: Industrial
Country of production: Asia
Blade: 440C stainless steel
Blade treatment: Dual Tone
Handle: brass
Blade length: 75mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 71g.
Clip: -
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Note: -BO-01BO369 -
Boker Plus - Urban Spillo Flipjoint - men's knife - 01BO469 - knife
Intended use: Sports
Type of production: Industrial
Country of production: Asia
Blade: in 440C stainless steel
Blade treatment: Stonewash
Handle: in steel
Blade length: 76mm.
Blade thickness: 3mm.
Total height of the lung: 176 mm.
Pesos: 67 g.
Clip: removable, in stainless steel
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Note: pinball opening system on ball bearingsBO-01BO469 -
Boker Plus - Connector Titan Knife - 01BO353 - folding knife
The practical Connector of Boker Plus bears the unmistakable signature of the Polish cutler Jakub Wieczorkiewicz, now known all over the world for the quality of his production. The Connector is equipped with a spear point blade, CPM-S-35VN steel, on ball bearings. Made with an excellently machined titanium handle.
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN steel
Blade treatment: satin finish
Handle: Titanium
Blade length: 75mm.
Blade thickness: 3.2mm.
Total length: 176mm.
Weight: 88g.
Clip: removable steel
Closure: frame lock
Packaging: cardboard box with Boker Plus logos
Notes: opening via ball bearing system - design by Jakub WieczorkiewiczBO-01BO353 -
Boker Plus - Kazhan knife by Alexander Krava - D2 - 02BO069 - knife
The Boker Plus Kazhan is designed by Alexander Krava and is a practical neck knife with a short Sheepfood-shaped blade, practical and light, ideal as a back-up tool. The young cutler from Lviv, Ukraine places particular emphasis on the aesthetics of his models, which convince not only as reliable tools but also as high-quality accessories. The skeletonized Kazhan is made of D2 with a dark stonewash finish. Supplied with chain and custom Kydex sheath.
Intended use: Tactical / CQB
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 56mm.
Blade thickness: 4mm.
Total length: 140mm.
Balancing: -
Weight: 62g.
Sheath: For neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Alexander Krava designBO-02BO069 -
Boker Plus - Connector G10 Knife - 01BO354 - folding knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Total length: 176mm.
Weight: 78g.
Clip: removable steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearingsBO-01BO354 -
Boker Plus - Urban Spillo Jade G10 - gentleman's knife - 01BO357 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: in 440C stainless steel
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 176mm.
Weight: 47g.
Clip: removable, in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: pinball opening system on ball bearingsBO-01BO357