Guaranteed excellence: only the best brands
-
Roselli - small chef knife - R700 - kitchen knife
New blade design and exclusive leather case!
The Roselli Piccolo chef kitchen knife has been further improved with a new blade design, now 2mm thick (previously 3mm). This knife draws inspiration from Japanese tradition and is the perfect choice for all your cooking needs, both outdoors and indoors.
Thanks to its additional weight, this knife is ideal for chopping vegetables, slicing meat and expertly handling smaller bones. It's an indispensable tool for all your culinary adventures.
The blade is forged from high-quality carbon steel and is exceptionally sharp. The handle is made of beautiful curly birch wood and treated with linseed oil to ensure a comfortable and secure grip even when wet.
Now, the Roselli Piccolo Chef kitchen knife comes with an exclusively designed leather case, made of Finnish vegetable tanned leather. This case is both practical and aesthetically pleasing, allowing you to easily transport your beloved knife on all your adventures. Now you can protect your knife in style, wherever you go.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Blade production: Finland
Handle: Arctic Birch
Blade length: 135mm.
Blade thickness: 2mm.
Total length: 250mm.
Weight: 145g.
Sheath: Light vegetable tanned leather
Notes: Made, sharpened and perfected by hand in Harmoinen, FinlandRO-R700 -
Roselli - Carpenter knife full tang - R110F - artisan knife
Roselli's version of the ultimate outdoor knife is now also available in a full tang model with hidden steel (where the blade runs through the entire handle) to give you better support and balance when you use it intensely. All Roselli full tang knives are long-lasting, sturdy and perfect for heavy-duty use.
The design is inspired by traditional carving knives and, thanks to its handy size, can be adapted anywhere. The knife is also effective as a hunting knife and the size of the blade makes it suitable for hunters who prefer to hunt smaller game.
This new full tang knife features a carbon steel blade and a stabilized birch handle, featuring an eyelet hole for strap attachment. Wood stabilization is the process of strengthening the wood so that it no longer reacts to changes in humidity, which cause the wood to shrink or swell.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Blade production: Finland
Handle: Arctic Birch
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: -
Total length: 195mm.
Balancing: -
Weight: 145g.
Closure: -
Clips: -
Sheath: light brown leather
Note: -RO-R110F -
Roselli - Hunting Nalle knife - UHC steel - RW200A - handcrafted knife
This handmade Finnish hunting and outdoor knife is an exclusive version of the classic "Hunting" model and has a unique reindeer horn shape and decoration.
It was originally developed as a knife for moose hunters in Finland and quickly became the perfect companion for working larger game such as moose, wild boar and deer. The design and profile of the blade are excellent for skinning game.
The blade is made of UHC (Ultra High Carbon) steel and the handle decorated with reindeer antlers is curly birch, stained and coated with linseed oil, which ensures a firm grip, even when wet. UHC steel makes the knife extremely sharp for a long time.
Comes with a handcrafted sheath of dark vegetable tanned Finnish leather in combination with stained curly birch, for a unique look. Made, sharpened in collaboration with knife maker Kari Ohtonen.
Intended use: Hunting/Sports/Collection
Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 235mm.
Balancing: -
Weight: 130g.
Closure: -
Clips: -
Sheath: Vegetable tanned leather with reindeer antlers
Note: -RO-RW200A -
Roselli - Heimo 4” Bushcraft edition full tang - R42 - handcrafted knife
This new Finnish outdoor and hunting knife called Heimo 4" Bushcraft edition, full tang, is designed to take on all your wilderness adventures and challenges. Very popular for bushcraft, hunting, fishing and the outdoors open.Roselli has chosen to make this blade with carbon steel for a longer life of the edge.
This model has a full tang, therefore more balanced and robust than the standard version. In fact, Roselli full tang knives are resistant, durable and perfect for heavy use.
The knife has a beautiful curly stained birch handle coated with linseed oil to ensure a firm grip, even when wet. The handle also has brass clamps and strap holes.
It comes in a handmade sheath of dark vegetable tanned Finnish leather, with a metal spring to keep the knife firmly in place at all times. You can choose between two scabbard options; scabbard combined with Firesteel Roselli or a standard scabbard.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: -
Total length: 220mm.
Balancing: -
Weight: 200g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-R42 -
Roselli - Fulltang hunting knife - R100F - handcrafted knife
The "first" Roselli, with a minimalist design dating back to 1976. For over 45 years it has been used in wild nature and tackles hunting, fishing and life in the open air with ease. This version of Hunting is the full tang version, more balanced and robust. Roselli full tang knives are resistant, durable and perfect for heavy use.
This handmade Finnish hunting knife was originally developed as a knife for moose hunters in Finland and quickly became the perfect companion for handling larger game such as moose, wild boar and larger deer. The design and profile of the blade make it excellent for skinning game.
This new version features a full tang carbon steel blade and a curly birch handle, coated with linseed oil, which brings a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: -
Total length: 220mm.
Balancing: -
Weight: 200g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-R100F -
Roselli - Hunting and Grandmother knives - pair - R180 - handcrafted knife
When one isn't enough..., this Double Sheath Set, is the two knife configuration that allows you to easily carry both the "Hunting Knife" and the "GrandMother" knife.
Both blades of the two knives are made of forged carbon steel and the handles are made of curly birch, coated with linseed oil, which ensure a firm grip, even when wet. Comes with a handcrafted double sheath of light vegetable tanned Finnish leather, tailored to fit both knives
Roselli - Hunting Knife - R100 - Artisan Knife
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 227mm.
Balancing: -
Weight: 120g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -Roselli - Grandmother Knife - R130 - Artisan Knife
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: -
Total length: 150mm.
Balancing: -
Weight: 52g.
Closure: -
Clips: -
Sheath: brown leather
Note: -RO-R180 -
Roselli - Leuku small knife - R151 - handcrafted knife
With a lower weight and smaller size than its big brother Big Leuku - the small Leuku is a versatile outdoor tool with properties slightly more similar to those of a bushcraft knife. The little Leuku is an all-round knife, capable of handling everything you can tackle in a woodland environment: cutting, separating bones, carving and many other tasks within the outdoors and wilderness survival.
The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 140mm.
Blade thickness: 5mm.
Closed length: -
Total length: 265mm.
Balancing: -
Weight: 240g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-R151 -
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP -
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY -
Roselli - Allround Small Finland Ax - R860 - Ax Hatchet
This is Roselli's handmade outdoor ax in a practical size with a short handle, which you can easily carry with you on your hikes in nature.
Roselli's axes always deliver on their promises and are considered by many to be the perfect companion and tool when you go out into the wilderness. Roselli's axes are robust, extremely sharp and can be used for felling, pruning and making firewood. They are also excellent tools for splitting and tensioning wood, as the broad blade of the axes protects them from snagging while cutting.
It comes with a simple case in vegetable tanned Finnish leather to protect the edge and a practical loop that allows it to be carried on a belt or attached to a backpack. The handle is made from birch and coated with linseed oil to ensure a firm grip, even when wet.
Type of production: Artisanal
Lama production: Finland
Blade: 60HRC hardened carbon steel
Blade finish: brut de forge
Handle: birch wood
Blade length: 90mm.
Total length: 350mm.
Weight: 720g.
Sheath: in worked and hand-stitched leatherRO-R860 -
Rivista - Blade - Febbraio 2003 - °RC
Blade è ritenuta la più accreditata e aggiornata rivista di coltelli al mondo - Blade è un mensile di oltre 120 pagine a colori e in bianco e nero, nelle quali vengono presentate: le novità delle migliori aziende produttrici, coltelli fissi, chiudibili, custom, tattici, test qualitativi, prove e altro ancora. Rivista completamente in inglese.b-2-3 -
Rivista - Blade - Marzo 2003 - °RC
Blade è ritenuta la più accreditata e aggiornata rivista di coltelli al mondo - Blade è un mensile di oltre 120 pagine a colori e in bianco e nero, nelle quali vengono presentate: le novità delle migliori aziende produttrici, coltelli fissi, chiudibili, custom, tattici, test qualitativi, prove e altro ancora. Rivista completamente in inglese.b-3-3 -
Rivista - Blade - Novembre 2003 - - rivista coltelli americana
Blade è ritenuta la più accreditata e aggiornata rivista di coltelli al mondo - Blade è un mensile di oltre 120 pagine a colori e in bianco e nero, nelle quali vengono presentate: le novità delle migliori aziende produttrici, coltelli fissi, chiudibili, custom, tattici, test qualitativi, prove e altro ancora. Rivista completamente in inglese.b-11-3 -
Rivista - Blade - Ottobre 2002 - °RC
Blade è ritenuta la più accreditata e aggiornata rivista di coltelli al mondo - Blade è un mensile di oltre 120 pagine a colori e in bianco e nero, nelle quali vengono presentate: le novità delle migliori aziende produttrici, coltelli fissi, chiudibili, custom, tattici, test qualitativi, prove e altro ancora. Rivista completamente in inglese.b-10-2 -
Roselli - Allround Finland Ax - R850 - Ax Accept
Handmade outdoor ax from Finnish Roselli with a long handle that gives that extra power when splitting wood.
Axes always deliver on their promises and are considered by many traders and enthusiasts to be the perfect companion and tool when you go out into the wilderness.
Roselli axes are robust, extremely sharp and can be used for felling, pruning and logging. They are also excellent tools for splitting and tensioning wood, as the broad blade of the axes protects them from snagging while cutting.
It comes with a simple case in vegetable tanned Finnish leather to protect the edge and a practical loop that allows it to be carried on a belt or attached to a backpack. The handle is made from birch and coated with linseed oil to ensure a firm grip, even when wet.
Type of production: Artisanal
Lama production: Finland
Blade: 60HRC hardened carbon steel
Blade finish: brut de forge
Handle: birch wood
Blade length: 90mm.
Total length: 450mm.
Weight: 740g.
Sheath: in worked and hand-stitched leatherRO-R850 -
Roselli - Big Fish knife Fillet UHC - RW255 - knife
A powerful filleting knife, excellent for working larger fish but also perfect for bread, meat and vegetables.
The blade is made of UHC (Ultra High Carbon) steel and the handle is made of heat-treated curly birch, coated with linseed oil , which guarantees a firm grip even when wet. UHC steel gives you an extremely sharp knife that retains its sharpness for a very long time - keep in mind that hard UHC steel is not suitable for penetrating bone or other hard materials.
Comes with a handcrafted sheath of naturally dark tanned Finnish leather.
Intended use: Hunting/Sports/Fishing
Type of production: artisanal
Blade: in UHC 64/66HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 210mm.
Blade thickness: 1.5mm.
Total length: 335mm.
Weight: 108g.
Sheath: LeatherRW255 -
Roselli - Carpenter's knife - R110 - craft knife
This handmade Finnish knife is Roselli's version perfect for outdoor use. The design is inspired by traditional carving knives and thanks to its handy size, you can fit it anywhere. The knife also works well as a hunting tool and the size of the blade makes it suitable for hunters who prefer to hunt smaller game.
The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: -
Total length: 195mm.
Balance: -
Weight: 72g.
Closure: -
Clip:-
Sheath: brown leather
Note: -RO-R110 -
Roselli - Grandfather knife - R120 - handcrafted knife
This handmade Finnish hunting knife is the shorter version of the classic "hunting knife". Extremely popular model due to its handy size which makes it easy to carry anywhere.
The slightly curved and short blade is particularly useful and comfortable for hunting use.
The blade is made of forged carbon steel, and the handle is made of curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: -
Total length: 180mm.
Balancing: -
Weight: 95g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-R120 -
Roselli - Grandmother knife - R130 - handcrafted knife
The small and handy "Mummunhammas" (grandmother's tooth) is a traditional knife from a time when old people used knives to chop food, once their teeth were gone.
Roselli's handmade Finnish Grandmother's Knife is an all-round outdoor knife that can fit into any space and therefore a very popular and loyal companion to take with you into the woods.
The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted Finnish vegetable tanned leather sheath.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: -
Total length: 150mm.
Balancing: -
Weight: 52g.
Closure: -RO-R130 -
Roselli - Hunting knife - R100 - handcrafted knife
The "first" Roselli, with a minimalist design dating back to 1976. For over 45 years it has been performing in the wild nature and casually tackling hunting, fishing and life in the open air.
This handmade Finnish hunting knife was originally developed as a hunting knife for moose hunters in Finland and quickly became the perfect companion for handling larger game such as moose, wild boar and larger deer. The design and profile of the blade make it excellent for skinning game.
The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 227mm.
Balancing: -
Weight: 120g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-R100 -
Roselli - Little Carpenter knife - R140 - handcrafted knife
Finnish handmade hiking knife by Roselli for beginners, scouts and young outdoor enthusiasts. This little knife is designed with safety in mind and its blunt point makes it safe, while the sharp edge is suitable for carving and other difficult woodworking challenges. As the user's skill increases, the point can be sharpened more sharply.
The blade is made of carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: collection/huntingType of production: artisanal
Blade: 60 HRC carbon steel
Blade treatment: -
Handle: arctic birch briar
Blade length: 60mm.
Blade thickness: 3mm.
Closed length: -
Total length: 155mm.
Balancing: -
Weight: 45g.
Closure: -
Clips: -
Sheath: in brown leather
Note: -RO-R140 -
Roselli - UHC carpenter's knife - RW210 - craft knife
This handmade Finnish knife is Roselli's version of the ultimate hiking knife. The design is inspired by traditional carving knives and thanks to its handy size, you can fit it anywhere. The knife also works well as a hunting knife and the size of the blade makes it suitable for hunters who prefer hunting smaller game.
The blade is made of UHC (Ultra High Carbon) steel and the handle is made of heat-treated birch, coated with linseed oil, which ensures a firm grip, even when wet. The UHC steel makes the knife extremely sharp and keeps its sharpness for a long time. Comes with a handcrafted dark vegetable tanned Finnish leather sheath.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: in UHC 64/66HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: -
Total length: 190mm.
Balancing: -
Weight: 65g.
Closure: -
Clips: -
Sheath: brown leather
Note: -RO-RW210 -
Roselli - Grandfather knife - UHC steel - RW220 - handcrafted knife
This handmade Finnish hunting knife is the shorter version of the classic "hunting knife". Extremely popular model due to its handy size which makes it easy to carry anywhere.
The slightly curved and short blade is particularly useful and comfortable for hunting use.
The blade is made of UHC (Ultra High Carbon) steel and the handle is made of heat-treated curly birch, coated with linseed oil, which ensures a firm grip, even when wet. The UHC steel gives the knife a very long edge life - please note that the hard UHC steel is not suitable for penetrating bone or other hard materials. Comes with a handcrafted sheath of dark vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: -
Total length: 200mm.
Balancing: -
Weight: 100g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-RW220 -
Roselli - Allround Small Finland Ax - red elm - R860D - Ax Accept
This handmade outdoor ax from Finnish Roselli is handy in size with a short handle made of beautiful slippery elm, which you can easily take with you anywhere in nature.
Roselli axes always deliver on their promises and are considered by many to be the perfect companion and tool when you go out into the wilderness. Roselli's axes are sturdy, have extreme sharpness and can easily be used for felling, pruning and logging. They are also a great tool for splitting and tensioning wood, as the wide angle of the axes blade prevents them from binding while splitting.
It comes with a simple dark vegetable tanned Finnish leather case to protect the line and a handy loop that allows it to be carried on a belt or attached to a backpack. The handle is made from birch and coated with linseed oil to ensure a firm grip, even when wet.
Type of production: Artisanal
Lama production: Finland
Blade: 60HRC hardened carbon steel
Blade finish: brut de forge
Handle: birch wood
Blade length: 90mm.
Total length: 350mm.
Weight: 720g.
Sheath: in worked and hand-stitched leatherRO-R860D -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2 -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB -
Rivista - Blade - Dicembre 2002 - °RC
Blade è ritenuta la più accreditata e aggiornata rivista di coltelli al mondo - Blade è un mensile di oltre 120 pagine a colori e in bianco e nero, nelle quali vengono presentate: le novità delle migliori aziende produttrici, coltelli fissi, chiudibili, custom, tattici, test qualitativi, prove e altro ancora. Rivista completamente in inglese.b-12-2 -
Rivista - Blade - Gennaio 2003 - °RC
Blade è ritenuta la più accreditata e aggiornata rivista di coltelli al mondo - Blade è un mensile di oltre 120 pagine a colori e in bianco e nero, nelle quali vengono presentate: le novità delle migliori aziende produttrici, coltelli fissi, chiudibili, custom, tattici, test qualitativi, prove e altro ancora. Rivista completamente in inglese.b-1-3 -
Rivista - Blade - Giugno 2003 - °RC
Blade è ritenuta la più accreditata e aggiornata rivista di coltelli al mondo - Blade è un mensile di oltre 120 pagine a colori e in bianco e nero, nelle quali vengono presentate: le novità delle migliori aziende produttrici, coltelli fissi, chiudibili, custom, tattici, test qualitativi, prove e altro ancora. Rivista completamente in inglese.b-6-3 -
Rivista - Blade - Luglio 2003 - °RC
Blade è ritenuta la più accreditata e aggiornata rivista di coltelli al mondo - Blade è un mensile di oltre 120 pagine a colori e in bianco e nero, nelle quali vengono presentate: le novità delle migliori aziende produttrici, coltelli fissi, chiudibili, custom, tattici, test qualitativi, prove e altro ancora. Rivista completamente in inglese.b-7-3 -
Rivista - Blade - Maggio 2003 - °RC
Blade è ritenuta la più accreditata e aggiornata rivista di coltelli al mondo - Blade è un mensile di oltre 120 pagine a colori e in bianco e nero, nelle quali vengono presentate: le novità delle migliori aziende produttrici, coltelli fissi, chiudibili, custom, tattici, test qualitativi, prove e altro ancora. Rivista completamente in inglese.b-5-3 -
Rivista - Blade - Novembre 2002 - °RC
Blade è ritenuta la più accreditata e aggiornata rivista di coltelli al mondo - Blade è un mensile di oltre 120 pagine a colori e in bianco e nero, nelle quali vengono presentate: le novità delle migliori aziende produttrici, coltelli fissi, chiudibili, custom, tattici, test qualitativi, prove e altro ancora. Rivista completamente in inglese.b-11-2 -
Rivista - Blade - Ottobre 2003 - °RC
Blade è ritenuta la più accreditata e aggiornata rivista di coltelli al mondo - Blade è un mensile di oltre 120 pagine a colori e in bianco e nero, nelle quali vengono presentate: le novità delle migliori aziende produttrici, coltelli fissi, chiudibili, custom, tattici, test qualitativi, prove e altro ancora. Rivista completamente in inglese.b-10-3 -
Rivista - Blade - Settembre 2003 - °RC - rivista di coltelli
Blade è ritenuta la più accreditata e aggiornata rivista di coltelli al mondo - Blade è un mensile di oltre 120 pagine a colori e in bianco e nero, nelle quali vengono presentate: le novità delle migliori aziende produttrici, coltelli fissi, chiudibili, custom, tattici, test qualitativi, prove e altro ancora. Rivista completamente in inglese.b-9-3 -
Roselli - Big Leuku knife - R150 - handcrafted knife
With its large size and weight, the Big Leuku looks like a mix between an ax and a machete. Roselli's Big Leuku is a traditional Finnish handmade tool that has been used for centuries by reindeer herders and carpenters for cutting, splitting bones, carving and many other tasks in the outdoors and in wilderness survival.
The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 200mm.
Blade thickness: 5mm.
Closed length: -
Total length: 310mm.
Balancing: -
Weight: 310g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-R150 -
Roselli - Hunting knife - UHC steel - RW200 - handcrafted knife
The "first" Roselli, with a minimalist design equal to that which was produced in 1976. For over 45 years it has been perfect for specific use in the outdoor environment, for hunting, fishing and life in the open air.
This handmade Finnish hunting and outdoor knife was originally developed as a hunting knife for moose hunters in Finland and quickly became the perfect companion for handling larger game such as moose, wild boar and larger deer. The design and profile of the blade make it excellent for skinning game.
The blade is made of UHC (Ultra High Carbon) steel and the handle is made of heat-treated curly birch, coated with linseed oil, which ensures a firm grip even when wet. UHC steel produces an extremely sharp knife that retains its sharpness for a long time. Comes with a handcrafted sheath of dark vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 230mm.
Balancing: -
Weight: 115g.
Closure: -
Clips: -
Sheath: Vegetable tanned leather
Note: -RO-RW200