Guaranteed excellence: only the best brands
-
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP -
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY -
Eickhorn - A.S.E.K. Multifunction Aviator Knife Tanto - PRIVATE COLLECTION - knife
Knife from a private collection, overall in excellent condition, with scratches on the blade due to insertion and removal from the sheath. Unpackaged - Checked, certified by our in-house laboratory.
Designed for NATO military aircraft crews, the ASEK-Bowie is a rescue and emergency knife
Intended use: Fighter / Tactical
Type of production: industrial
Blade: 440 56HRC stainless steel
Blade treatment: Teflon coated
Production Lama: Germany
Handle: Polyamide reinforced with fiberglass
Blade length: 135mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 270mm.
Balancing: -1cm back from the guard branch
Weight: 235g.
Sheath: cordura and polyamide with sharpener and small backup knife110144 -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2 -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB -
Eickhorn - Slim Cut Fiberglass knife
Eickhorn - Slim Cut Fiberglass knife
Intended use: Sport
Type of production: Industrial
Blade Production: Germany
Blade: 440C stainless steel
Treatment Blade: -
Handle: aluminum with carbon fiber inserts
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 187mm.
Thick when closed: 1.3 cm
Balancing: -
Weight: 100g.
Lock: Liner Lock
Clip: Steel Sheath: -
Packing: Notes:slimcut -
Eickhorn - Bellator - 825203 - coltello
The new "Bellator" is the first SYSTEMA knife, that ES and Andreas Weitzel -one of the leading SYSTEMA trainers- have jointly developed. Andreas Weitzel has contributed with his practical expertise in the field of Russian ´combat and self-defence´. The knife is made of proven Böhler N695 stainless steel and comes with anti-slip G-10 grips. The shape of the handle has been influenced by the Cossack sabre, also knows as the `Schaschka`. The basic principle of the `Schaschka`is that it facilitates `grip, draw and strike` in a single, fluent movement. The large screws, the indentation in the middle part of the grip and the ergonomical finger geometry enable excellent handling and rapid change of hold. This makes the `Bellator` excellent for self-defence. This knife is also a superb choice for hunters, outdoor fans and survival specialists. For flexible carrying ES have chosen a Kydex sheath with belt adapter. Weight 220 g, blade 11,7 cm, overall 23,7 cm.10061 -
Eickhorn - Cyprus SF - 825112 coltello
Destinazione d'uso: Fighter/Tattico
Tipo di produzione: industriale
Lama: in acciaio inox 55Si7 53HRC
Trattamento Lama: teflonata
Produzione Lama: Germania
Manicatura: Poliammide rinforzato in fibra di vetro
Lunghezza lama: 175mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 310mm.
Bilanciatura: sul ramo di guardia
Peso: 268g.
Fodero: cordura e poliammide
Note: -7268 -
Eickhorn - Desert Commando II - 825117 coltello
Destinazione d'uso: Fighter/Tattico
Tipo di produzione: industriale
Lama: in acciaio inox N695Co 57HRC
Trattamento Lama: teflonata
Produzione Lama: Germania
Manicatura: Poliammide rinforzato in fibra di vetro
Lunghezza lama: 175mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 310mm.
Bilanciatura: sul ramo di guardia
Peso: 320g.
Fodero: cordura e poliammide7267 -
Eickhorn - KM3000 - 825122 coltello
Destinazione d'uso: Fighter/Tattico
Tipo di produzione: industriale
Lama: in acciaio inox N695Co 57HRC
Trattamento Lama: teflonata
Produzione Lama: Germania
Manicatura: Poliammide rinforzato in fibra di vetro
Lunghezza lama: 175mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 310mm.
Bilanciatura: sul ramo di guardia
Peso: 275g.
Fodero: cordura e poliammide7266 -
Eickhorn - Para Commando - 825111 coltello
Destinazione d'uso: Fighter/Tattico
Tipo di produzione: industriale
Lama: in acciaio inox N695Co 57HRC
Trattamento Lama: teflonata
Produzione Lama: Germania
Manicatura: Poliammide rinforzato in fibra di vetro
Lunghezza lama: 175mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 310mm.
Bilanciatura: sul ramo di guardia
Peso: 320g.
Fodero: cordura e poliammide
Note: tagliacavi integrato nel fodero7265 -
Eickhorn - Shell Gentleman - coltello
Piccolo gioiello realizzato dalla nota casa tedesca di coltelli militari Eckhorn - La particolare e precisa lavorazione di cesellatura fatta sulla manicatura in acciaio inox del coltello, produce gradevoli effetti di luce, rendendo lo stesso un bellissimo oggetto da impugnare e collezionare.
Lama in acciaio 440 di cm 5
- Lunghezza totale cm 14,5
- Peso 80 grammi
- Confezione regalo2372 -
Eickhorn - Zenith Gentleman - coltello
Piccolo gioiello realizzato dalla nota casa tedesca di coltelli militari Eckhorn - La particolare e precisa lavorazione di cesellatura fatta sulla manicatura in acciaio inox del coltello, produce gradevoli effetti di luce, rendendo lo stesso un bellissimo oggetto da impugnare e collezionare.
- Lama in acciaio 440 di cm 5
- Lunghezza totale cm 14,5
- Peso 80 grammi
- Confezione regalo2371